Upload
habao
View
217
Download
0
Embed Size (px)
Citation preview
Where DOES IT FIT?
Deep, Narrow Groove CLAD Overlay
Sheet Metal High Deposition
Fast Fillet Welds Low Distortion
5/16” (8 mm) gap
3/4” (19 mm) thick
3/16” (4.7 mm)
7/16” Thick3/16” gapNO BEVEL
19 ipmTravel Speed
Near zero distortion
19 ipm Travel Speed3/16” gap, square buttDual torchFull pen/1 side/ceramic
1.375” WT X6520 ipm travel 12 lbs/hr
<5% Fe dilution, 1 pass 15 lbs/hr deposition rate
MA-400MACHINE TORCH
optional heat shield
strong, light weightaluminum body
quick release cap
strain relief for excellent wire feeding
400 A, air-cooled
100% duty cycle
.035 – 1/16” (0.9 – 1.6 mm)
GMAW, GMAW-P, FCAW
3 - 15 ft. (1.8 – 4.6 m) cables
Rated to IEC 60974-7
Accessories& CONSUMABLES
Mounting Kit (CB-MK1)Bump Guard (CB-BG1)
Hand Welding Kit (HWK-1)Consumables
Nozzle-Contact TipRELATIONSHIP
Contact Tip Extensions1043-00 Flush1043-25 .25” extended1043-50 .50” extended1043-75 .75” extended1043-100 1.0” extended
!
!
HEAVY&WALL&PIPE,&HYDRAULIC&CYLINDERS,&TANKS!
Joint!Detail!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
! !
Productivity!Gains!From!SpinArcTM!
SAVINGS:! 28.5%!cost!reduction!
28.5%!reduction!in!welding!time!!
!
$9.83/ft!saved!!
x!750!ft/month!!
=!$7,370!per!month!savings!in!welding!alone!!!
SpinArcTM&Conventional&
Productivity STUDIES
Consumables
Parts & Consumables GuideMA-400 SpinArc™ Welding System
Power Pins (Table 1)
Part # Manufacturer Description
PP-F1 Fronius ThruArm Style: VR 1500 M, VR 1500 PAP VR15000
PP-F2 Fronius "North American" Style Power Pin
PP-F3 Fronius Fronius F++ Power Pin
PP-TW4 Lincoln Power-MIG 255, Power-MIG 200, 250, 300, 350 MC, PF 10M, PF 25M, DH-10, LN-10, LN-25 PRO, STT-10
PP-L2 Lincoln LN4, LN5, LN6, LN7, LN8, LN9, LN22, LN25, LN742, NA5R, Power-Feed 10, Power Wave 450/455, Synergic 7
PP-M1 Miller Millermatic 250MP, 300, MM-35, MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, S32S, 52D, 54D, 52E, 54E, 22 Series, 60 Series, 70 Series, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115
PP-TW4 Various Tweco #4
PP-TW5 Various Tweco #5
PP-EURO Various European Styel Power Pin
Wire Liners (Table 3)
Part # Description
L415-116-6 6 ft. (1.8 m) 0.045-1/16”
L415-116-10 10 ft. (3.0 m) 0.045-1/16”
Contact Tips & Extentions (Table 4)
Part # Description
CT403-27-35 CrZr Extended Life HD, for 0.035” (0.9mm)
CT403-20-45 Heavy Duty Tip, for .045” (1.2mm) Wire
CT403-21-45 Tapered Tip, for .045” (1.2mm) Wire
CT403-27-45 CrZr Extended Life HD Tip, for .045” (1.2 mm) Wire
CT403-20-52 Contact Tip 0.52”/1.33 mm
CT403-20-116 Heavy Duty Tip for 1/16” (1.6mm) wire
CT403-20-116-25 Tough Lock Tip, for 1/16” (1.6mm) Wire
NOTE: Items listed above sold in bags of 100
1043-00 Contact Tip Extention .00”
1043-25 Contact Tip Extention .25”
1043-50 Contact Tip Extention .50”
1043-75 Contact Tip Extention .75”
1043-100 Contact Tip Extention 1.00”
Control Cables (Table 5)
Part # Description
CC-6 Control Cable, 6 ft. (1.8 m)
CC-15 Control Cable, 15 ft. (4.6 m)
TC-15 Trigger Cable 15ft. (4.6 m)
Gas Nozzles (Table 2)
Part # Description
N401-5-75 HD Nozzle, 3/4” (19 mm) BORE - 1/4” (6 mm) Recessed
N401-4-75 Nozzle, 3/4” (19 mm) BORE - 1/8” (3 mm) Recessed
N401-6-75 Nozzle, 3/4” (19 mm) BORE - 1/8” (3 mm) Recessed Copper
N401-7-75 HD Nozzle, 3/4” (19 mm) BORE - 1/8” Recessed
N401-81-62 HD Nozzle, 5/8” Bore - 1/8” Stick-Out
Sold in packs of 10
Consumable GUIDE
Weld Revolution LLC 19511 W ied R d ! Su ite E ! Spr ing ! TX 77388 ! U SA
Phone: +1-8 32-585-124 4 ! Fax : +1-8 32-585-1109 ! info@ w eldrevolut ion.com
w w w .w eldrevolut ion.com
Operation Manual
MA-400, Machine Air-Cooled
SpinArcTM
Welding Torch
Doc #: OM-MA-400-04
Revision 1.4, 8/12/2015
Operation Manual
Model #: MA-400TM
Air-Cooled, Mechanized
SpinArcT M Welding Torch
Patents Pending
OperationMANUAL
by Susan Woods, senior editor
ADDINTHESPIN
High-speed rotating
arc welding increases
productivity and quality
Pipe welding with the SpinArc system.
Technical PAPERS