GARLOCK EXPANSION JOINT (MSDI-P13671) Systems Design Review II
January 18 th, 2013 Friday, January 18, 2013P13671 - Garlock
Expansion Joint 1
Slide 2
P13671 Members Left to Right: Allison Feinberg (Member) Sam
Kulpinski (Member) Don Thompson (Member) Wayne Evans (Customer)
Elspeth Ochs (Member) Joseph Harkins (Team Lead) Danny McCormick
(Member) Dr. Jason Kolodziej (Faculty) Friday, January 18,
2013P13671 - Garlock Expansion Joint 2
Slide 3
Introduction to P13671 Timeframe: Winter & Spring quarter
MSD Objective: Design and build rig to test Garlock Expansion
joints under high temperatures and actuation until failure while
logging data Friday, January 18, 2013P13671 - Garlock Expansion
Joint 3
Slide 4
Project Schedule Major Dates: Detailed Design Review (DDR):
2012-2 Week 10 (around 2/8/13) Imagine RIT: May 5, 2013 Final
Presentation: 2012-3 Week 10 (around 5/8/13) Celebrate our success
and graduation After Final Presentation! Link to our MS Project
file: /public/Project Schedule.mpp /public/Project Schedule.mpp
Friday, January 18, 2013P13671 - Garlock Expansion Joint 4
Concept #3 Fluid: Air Heat Source: Incoloy 840 Tubular Heating
Source Power: 10 Watt to heat 12 EJ to 400 F Min Size: 0.43in Dia.
x 4in Piping System Air Accumulator Contained Nitrogen Accumulator
Friday, January 18, 2013P13671 - Garlock Expansion Joint 15
Slide 16
Linear Actuator Options MOOG -890 Series standard electric
servoactuator 150mm stroke, front flange mount, male rod end Size
4: $5,900 Size 5: $7,900 +Motor Controller (DS2110 servodriver):
$3,000-$3,300 150mm stroke to 300mm stroke? +$500 THOMPSON ECT90
Series 6 inch stroke: (8 avail, +~$30) Part Number:
ECT09-I09B03PB2510-0153SJ00XX List: $3612.73 ea Lead Time: 4-5
Weeks (subj. to avail.) EXLAR Tritex II AC actuator part number
T2X115-0601 with a 138-30 winding
http://www.exlar.com/product_lines/23-Tritex-II-AC- Linear-Actuator
http://www.exlar.com/product_lines/23-Tritex-II-AC- Linear-Actuator
~$4,500 Includes controller Friday, January 18, 2013P13671 -
Garlock Expansion Joint 16