GARY W. KRUTZ Professor Agricultural & Biological Engineering

Director Electrohydraulic Center Agricultural & Biological Engineering

Purdue University West Lafayette, IN 47907

http://pasture.ecn.purdue.edu/~krutz

Tel: (765) 494-1179 Fax: (765) 496-1115 Email: krutz@purdue.edu

EDUCATION Ph.D. 1976 Agricultural Engineering, Michigan State University. M.A. 1971 Economics, University of Detroit. M.S. 1969 Agricultural Engineering, University of Wisconsin. B.S. 1967 Mechanical Engineering, University of Wisconsin.

POSITIONS HELD 2002-date Director, MAHA Distance Education Center, Purdue University. 1999-date Director, Electrohydraulic Center, Purdue University. 1992 Acting Department Head, Agricultural and Biological Engineering. 1985-date Professor, Agricultural & Biological Engineering, Purdue University. 1973-1974 Hingiss Implement, Inc., Chilton, Wisconsin. 1968-1973 Ford Motor Company, Dearborn, Michigan.

SABBATICALS Naples, Florida, January-June, 1997, Electrohydraulic writings. KVL Denmark, January-July 1990. CEMAGREF, France, August-December 1990, Machine Vision and Pesticide Detection Laser

Sensors. Univ. of Florida, January-June 1983. NMR Sensors and Robotics. Allis Chalmers Corp., July-December 1982.

TEACHING EXPERIENCE ABE 103 Intro to Careers in Engineering ABE 120 Introduction to Agricultural and Biological Engineering ABE 290 Sophomore Seminar (Guest Lecturer) ABE 335 Basic Fluid Power ABE 485 Agricultural and Biological Engineering Design ABE 435 Hydraulic Control Systems for Mobile Equipment

ABE 490 Senior Seminar ABE 501 Welding Engineering ABE 591B Hydrostatic Pumps I ABE 591C Valve Modeling ABE 591E MAHA Distance Education, Fluid Power Use ABE 591E Fluid Power Engineering I ABE 591K Welding Engineering ABE 591Z Vehicle Design ABE 601 Applied Finite Element Analyses AE 075 Transmissions AE 243 Engines AE 443 Farm Machinery AE 494 Power and Machinery AE 840 Advance Power and Machinery Design AGEN 322 Crop Production Equipment AGEN 530 Power and Machinery Management AGEN 590H Hydraulics in Agriculture AGEN 591K Microcomputers for Science and Engineering Educators

SELECTED HONORS Purdue University Teaching Academy Founding Fellow, 1997. Charles Murphy Award, Outstanding Teacher at Purdue, 1995. USDA Teaching Award, National Association of State Universities and Land Grant

Colleges,1995. Purdue Agricultural and Biological Engineering Outstanding Teacher Awards 1995, 1994, 1987,

1986, 1979. Engineering School Murphy Award Nomination, 1994. Society of Automotive Engineering, SAE Fellow, 1991. AA Potter Best of Engineering Teaching Award, Purdue University, 1987. American Society of Agricultural Engineers, Young Educator Award, 1983. SAE Ralph Teetor Educator Award, 1980.

PROFESSIONAL SOCIETIES Society of Automotive Engineers, Fellow. American Society of Agricultural Engineers, Fellow. American Society of Mechanical Engineers, Member. American Society of Engineering Education, Member. Sigma Xi, Past Member. Fluid Power Society, Secretary, 1977-79; President, 1979; Indiana Section National Vice-

President, 1988-89. Alpha Epsilon, Member. National Fluid Power Conference Board of Governors, Member.

2

Agricultural Engineering Magazine, Member Editorial Board, 1983-1989. Professional Engineer, State of Indiana, No. 18357. CERES, Ag Honorary. American Fishing Tackle Manufacturers, Member, 1985. ASAE Session Chairman for over 25 years.

PRINCIPAL PUBLICATIONS A. Books

1. Principal author of text “Machine Design: Industrial and Mobile Applications.” Society of Automotive Engineers, Warrendale, PA, 1994, by Krutz, Claar, and Schueller. Pgs 592. Second Edition, 1999.

2. Principal author of text “Design of Agricultural Machines.” John Wiley, Pub. N.Y., N.Y., 1984, by Krutz, Claar, and Thompson. Pgs. 472.

3. Krutz, G.W. and R. Akau. 1983. “Finite Element with Measurements: A Predictive Simulation.” A chapter in the book entitled, “Numerical Methods in Heat Transfer.” Vol. II” by R.W. Lewis, K. Morgan and B.A. Schrefler. John Wiley & Sons Inc. Pgs. 53-71.

4. Macqueene, J.W., R.L. Akau, G.W. Krutz and R.J. Schoenhals. 1982. “Development of Inverse Finite Element Techniques for Evaluation of Measurements Obtained from Welding Processes.” A chapter published in “Numerical Properties and Methodologies in Heat Transfer. Second National Symposium Proceedings, Hemisphere/McGraw-Hill, Pgs. 149-164.

B. Refereed Articles

1. Wolfe, R.R., Smetana, M. and Krutz, G.W. “Performance Characteristics and Feeder Design on the Pneumatic Conveyance of Chopped Forage.” Transactions of the ASAE May-June 1970, Pg. 332, and ASAE Paper No. 69-316, ASAE.

2. Krutz, G.W. “Time and Motion Study Used to Determine Tractor Design Parameters.” SAE Paper No. 750814, Society of Automotive Engineering and Transactions of the ASAE, December 1978.

3. Krutz, G.W. and Segerlind, L.J. “Finite Element Analysis of Welded Structures.” SAE Paper No. 760694, Society of Automotive Engineers and Welding Journal Research Supplement. July 1978, Pgs. 211S-216S. (Ph.D. Thesis published twice.) University of Michigan – Royalties received.

4. Hore, P.S., Krutz, G.W. and Schoenhals, R.J. “Application of the Finite Element Method to the Inverse Heat Conduction Problem.” ASME Winter Mtg. November 1977. ASME Paper No. 77-WA/TM-4, Journal for Numerical Heat Transfer. Vol. 1, Pgs. 489-498, 1978.

5. Krutz, G.W., Moyer, Jeff and Doster, D.H. “Techniques for Forecasting Farm and Industrial Tractor Sales.” SAE Paper No. 780753. September 1978. Transactions of the SAE, Vol. 87, 1979 and Ag. Engr. July 1979. Pgs. 18-23.

6. Krutz, G.W., Holt, D.A. and Miller, Doug. “A New Process for Fast Field Drying of Alfalfa.” Second International Dri-Crops Conference Proceedings, University of

3

Saskatoon, Saskatoon, Canada, August 1978 and Indiana ASAE Section. October 1978. Ag. Engr. August 1979. Pgs. 16-17.

7. Krutz, G.W., Parsons, S.D. and Combs R.F. “Analyzing Equipment Size and Its Effects on Farming Decisions.” ASAE Paper No. 77-1509, Transactions of the ASAE 1980. Published in Transactions of the ASAE as “Equipment Analysis with Farm Management Models,” 23(1):25-28, 1980.

8. Janni, K.A., Nye, J.C., Jones, D.D., Yahner, J.E. and Krutz, G.W. “Finite Element Analysis of Effluent Flow From Subsurface Sewage Disposal Fields.” ASAE Paper No. 78-2059. Transactions of the ASAE, 23(2):336-342, 1980.

9. Krutz, G.W., Johnson, P.E., Miller, Ken and Schueller, John. “Tomato Transport - Air Cushion Vehicle Design and Development.” ASAE, December 1978. ASAE Paper No. 78-1548. Transactions of the ASAE, 23(4):802-804, 1980.

10. Patent Issued in US and 7 Foreign countries, “Device for Treating Agricultural Products to Enhance Drying.” Inventor - G.W. Krutz. Patent Number 4,265,076, issued May 5, 1981 and British Patent No. 2019731.

11. Moreira, S., Krutz, G.W. and Foster, G.H. “Crack Formation in Corn Due to Impact Loading.” ASAE Winter Meeting, Chicago, IL, December 1980. Transactions of the ASAE, 24(4):889-892, 1981.

12. Macqueene, J.W., Akau, R.L., Krutz, G.W. and Schoenhals, R.J. “Numerical Methods and Measurements Related to Welding Processes.” 2nd International Conference on Numerical Methods in Thermal Problems, July 7-10, 1981, Venice, Italy. Pineridge Press, Swansea, U.K. Pgs. 153-167.

13. Mailander, M., Krutz, G.W. and Huggins, L.F. “Computer Controlled Hydraulics - A Combine Application.” SAE Paper No. 801019, September 1980. ASAE Paper No. 79-1615, December 1979. Transactions of SAE, 1981. Pgs. 3220-3229.

14. Gaultney, L., Krutz, G.W., Steinhardt, G. and Liljedahl, J.B. “Field and Laboratory Tests to Determine Effects of Subsoil Compaction on Corn Yield.” ASAE Paper No. 80-1011, June 1980. Transactions of the ASAE, 1982. 25(3):563-569, 575.

15. Krutz, G.W. and Isaacs, G.W. “Fluid Power Engineering Programs: Teaching and Research in Agricultural Engineering.” NCFP, 34:267-271, October 25, 1980.

16. Parsons, S.D., Smith, T. and Krutz, G.W. “Machinery Downtime Costs.” ASAE Paper No. 79-1030, June 1979. Transactions of the ASAE, 24(3):541-544,548, 1981.

17. Moreira, S.M.C., Krutz, G.W. and Foster, G.H. “Determinacao dos Parametros Necessarios a Simulacao do Impacto Mecanico em Graos do Milho.” Rev. bras. de armaz., Vicosa, 6(1):37-42, 1981.

18. Mailander, M.P., Schueller, J.K., Krutz, G.W., Huggins, L.F. “Combine Harvester On-Board Data Acquisition Systems.” ISA, Indianapolis, IN, April 1981, also NCFP, October 1981.

19. Copyright filed with the Office of Patents and Copyrights, Purdue University entitled, “Interactive Hydraulic Circuit Design and Analysis System Manual and Associated Computer Software.” Registration Number TX868-035. Issued 1982.

20. Mailander, M.P., Krutz, G.W. and Huggins, L.F. U.S. Patent No. 4337611. “Automatic Control of a Combine Threshing Cylinder and Feeder Conveyor.” July 6, 1982.

21. Kruse, J., Krutz, G.W. and Huggins, L.F. “Computer Controls for the Combine.” February 1983. Agricultural Engineering, Pgs. 7-9.

4

22. Kruse, J.G., Krutz, G.W. and Huggins, L.F. Patent No. 4,487,002. “Automatic Ground Speed Controller.” December 11, 1984.

23. Akau, R.L., Schoenhals, R.J. and Krutz, G.W. “Heat Transfer in Moving Solids Subjected to Surface Heating.” Journal Numerical Heat Transfer, 1985.

24. Gibson, H.G., Gaultney, L.D. and Krutz, G.W. “Roller-Wiper Herbicide Applicator: Control Of Right-Of-Way Hardwood Brush.” Presented by Dr. Gibson at the annual conference of the International Society of Arboriculture in Indianapolis, Indiana in August 1983. Journal of Arboriculture 10(3): March 1984. Pgs 71-82.

25. Schueller, J., Mailander, M. and Krutz, G.W. “Combine Feedrate Sensors.” Transactions of the ASAE, Vol. 28, No. 1, Pgs 2-6. 1985.

26. Krutz, G.W. and Evans, M. Patent No. 4,593,555. “Speed and Torque Sensor For Hydraulic Motor.” June 10, 1986.

27. Hennessey, M. and Krutz, G.W. “Expert CAD System For Statistical Tolerancing Internal Hydraulic Components.” NCFP, Vol. 39, May 1, 1986.

28. Streicher, E.A., Stroshine, R.L., Krutz, G.W. and Hinkle, C.N. “Cleaning Shoe Air Velocities in Combine Harvesting of Wheat.” Transactions of the ASAE, 29(4):923-928.

29. Evans, M., Krutz, G.W. and Beasley, D. “An Integral Hydraulic Motor Speed and Torque Sensor.” Transactions of the ASAE, May-June 1986, 29(3):667-671.

30. Hansen, D. and Krutz, G.W. Patent No. 4,679,488. “Integral Rotational Displacement Sensor for an Hydraulic Motor.” 40th National Conference on Fluid Power, Vol. 38: Pgs. 237-246. 1987. July 14, 1987.

31. Krutz, G.W. and Kruse, J. Patent No. 4,693,125. “Force Detecting and Indicating Apparatus for Fishing Rods.” September 15, 1987. Fishing Computer.

32. Cho, S.I., Krutz, G.W. Jones, D.D., and Doster, D.H. “An Expert System for Forecasting Combine Sales in U.S.A.” Transactions of SAE 96(3):903-909. 1988.

33. Cho, S.I., Krutz, G.W., and Miles, G.E. “Hydraulic System Control of Material Flow Rates with High Speed Resolution Capabilities.” Transactions of SAE 96(3):1350-1360. 1988.

34. Cho, S.I., Krutz., G.W., and Miles, G.E. “A Multi-Sensing Device for Hydraulic Control Systems.” Transactions of SAE 96(6):579-586. 1988.

35. Schueller, J.K. and Krutz, G.W. An Economic Model of Corn Combine Forward Speed Control. “Computers and Electronics in Agriculture.” Vol. 3, pgs. 16-22. 1988.

36. Haghighi, K., Smith, M., Krutz, G.W., Bennett, L., and Buchanan, J. 1988. “Finite Element Analysis and Design of a Diesel Engine Chassis Mount.” ASME Paper 88-WQ/DSC-36. Also Transaction article, Advances in Design Automation, Vol. 14, Pgs. 359-366, 1988.

37. Zhu, J., Haghighi, K. and Krutz, G.W. “Dynamic Analysis of an Engine Chassis Mount Bracket Using the Finite Element Method.” SAE 1988 Trans., Journal of Engines, Section 6, Vol. 97, Pgs. 1750-1758.

38. Zhu, J., Krutz, G.W., and Haghighi, K. 1989. “Dynamic Analysis of an Engine Chassis Mount Bracket Using the Finite Element Method.” SAE 1989 Trans., Journal of Engines, Section 6, Vol. 97, Pgs. 1750-1758.

39. Schueller, J.K. and Krutz, G.W. 1989. “An Economic Model of Corn Combine Forward Speed Control.” Computers and Electronics in Agriculture, 3 (1989), Pgs. 209-223.

40. Krutz, G.W. and Castaldi, A. 1989. “Interactions of Gel with Soybean Seeds.” ASAE Paper No. 86-1513. Applied Engineering in Agriculture, Vol. 5, No. 4, Pgs. 496-500.

5

41. Cho, S.I., G.W. Krutz, H.G. Gibson and K. Haghighi. 1990. “Magnet Console Design of an NMR Based Sensor to Detect Ripeness of Fruit.” Transactions of the ASAE 33(4):1043-1050.

42. Cho, S.I., V. Bellon, I.C. Baianu, R.L. Stroshine and G.W. Krutz. 1990. “Non-destructive Sugar Content Measurements of Intact Fruit Using T2 Measurements by a Low Resolution Pulsed H1 NMR.” Transactions of the ASAE 36(4):1217-1221.

43. Jia, J., G.W. Krutz and H.G. Gibson. 1990. “Corn Plant Locating by Image Processing.” SPIE Proceedings Vol. 1379, Optics in Agriculture, September 1990, Pgs. 246-253.

44. Jia, J., H.G. Gibson and G.W. Krutz. 1990. “Forces Required to Remove Tassels from Dent Seed Corn.” Applied Engineering in Agriculture Vol. 6, No. 5, Pgs. 553-556.

45. Haghighi, K., M.G. Smith and G.W. Krutz. 1990. “On-board Testing and Shape Optimization of an Engine Mount Bracket.” Applied Engineering in Agriculture 6(4):382-389.

46. Krutz, G.W. and NCR-143 Committee. 1990. “European Agricultural R & D - Which Way Now?” Agricultural Engineering Magazine, pgs. 14-19. April 1990.

47. Cho, S.I., V. Bellon, T.M. Eads, R.L. Stroshine and G.W. Krutz. 1991. “Sugar Content Measurement in Fruit Tissue Using Water Peak Suppression in High Resolution H1 Magnetic Resonance.” Journal of Food Science 56(4):1091-1094.

48. Brubaker, J.R., Krutz, G.W., Gibson, H.G., Nine, P. and Ukrainetz, P. 1991. “Hydraulic Control System for a Corn Detasseler.” SAE Paper No. 911792. Transactions of SAE, 100:226-238.

49. Jia, J., Krutz, G.W. and Gibson, H.G. 1991. “Evaluation of Machine Vision Algorithms for Locating Corn Plants.” SAE Paper No. 911794. Transactions of SAE, 100:248-252.

50. Jia, J. and Krutz, G.W. 1992. “Location of the Maize Plant with Machine Vision.” Journal of Agricultural Engineering Research. J. Agric. Engng. Res. 52:169-181.

51. Bellon, V., S.I. Cho, G.W. Krutz and A. Davenel. 1992. “Ripeness Sensor Development Based on Nuclear Magnetic Resonance.” Food Control, January, pp. 45-48.

52. Petersen, P. and Krutz, G.W. 1992. “Automatic Identification of Weed Seeds by Colour Machine Vision.” Seed Science and Technology. 20:193-208.

53. Zhu, J., G.W. Krutz and S-J. Jiao. 1992. “Analysis of Air Vibration Dampening on Towed Vibratory Rollers.” SAE Paper No. 920918. 43rd Annual Earthmoving Industry Conference Peoria, IL, April 7-8. Transactions of SAE, Journal of Commercial Vehicles Vol. 101:187-190.

54. Precetti, C.J. and G.W. Krutz. August 1993. “SPR: Statistical Pattern Recognition Software.” Copyright No. TX 3 653 808, PRF.

55. Precetti, C.J. and G.W. Krutz. August 1993. “nSPR: Neural Networks Equivalent to SPR Software.” Copyright No. TX 3 653 809, PRF.

56. Precetti, C.J. and G.W. Krutz. August 1993. “rSPR: Real-Time SPR Software.” Copyright No. TX 3 651 896, PRF.

57. Precetti, C.J., K. Haghighi, G.W. Krutz and R.L. Stroshine. August 1993. “IMAGEMESH: Image Processing for Finite Element Analysis Mesh Generation Software.” Copyright No. TX 3 653 350, PRF.

58. Krutz, G.W., J. Kruse and C. Sherwood. October 1993. “Apparatus for Detecting and Measuring Force on a Fishing Rod.” U.S. Patent No. 5,259,252.

59. Cho, S.I., R.L. Stroshine, I.C. Baianu and G.W. Krutz. 1993. “Nondestructive Sugar Content Measurements of Intact Fruit Using Spin-spin Relaxation Time (T2)

6

Measurements” by Pulsed H1 Magnetic Resonance. Transactions of the ASAE 36(4):1217-1221.

60. C.J. Precetti, G.W. Krutz. “Color Machine Vision Tutorial.” Mosaic Hypermedia Document.

61. C.J. Precetti, G.W.Krutz. “ClassHelp.m: A Mathematica Package for Color Classification Tutorial” Mathematica package.

62. Precetti, C.J. and Krutz, G.W. 1995. “Performance Evaluation Techniques for Color Vision Systems.” Transactions of the ASAE.

63. Wai, Wing-King, R.L. Stroshine and G.W. Krutz. 1995. “A Modified Hahn Echo Pulse Sequence for Proton Magnetic Resonance (1H-MR) Measurements of Percent Soluble Solids of Fruits.” Transactions of the ASAE Vol. 38(3):849-855.

64. Krutz, G.W., H.G. Gibson, and D.M. Queiroz, 1995. “New Technology – New Vehicle Changes Between 1995-2005.” Transactions ISTVS, Nagoya, Japan, p1-8.

65. Franca, A.S., K. Haghighi, L.S. Oliveira, and G.W. Krutz, 1995. “The Application of Adaptive Finite Element Analysis to Heat and Mass Transfer.” Journal of Agricultural Engineering Research 62:49-60.

66. Queiroz, D.M., H.G. Gibson, G.W. Krutz, and K. Haghighi. 1995. “Steering Performance Analysis of Rubber Tracked Tractors Using Mechanical Systems Simulation.” ASAE Paper No. 951324, June, 1995, 21 pp.

67. El-Behery, A., G.W. Krutz, Z. El-Haddad and M. El-Ansaary. 1997. “Low Cost Higher Efficiency Portable Egyptian Thresher.” AMA-Agricultural Mechanization in Asia, Africa and Latin America, 28(1):35-39. Published by Farm Machinery Industrial Research Corp., Shin-Norinsha Co. Ltd., Tokyo, Japan.

68. Wettschurack, K.P., Gibson, H.G., Cassens, D.L., Krutz, G.W. “Factors Causing Ridge Formation During Wide-Belt Sanding and Corrective Actions.” Journal of Forest Products 1998, February 1999,

69. Fadel, M.A., Krutz, G.W., Sumali, H., White, H. “Dynamic Simulation of a Position-controlled Electrohydraulic System Using EASYS.” 1999. Transaction is of SAE, Vol. 108, pp. 368-377.

70. Krutz, G.W., Gibson, H.G., Cassens, D.L., Zhang, M. “Machine Vision: Colour Vision in Forest and Wood Engineering.” IAgrEJournal Landwards. Vol. 55, NO. 1, Spring 2000, pp. 2-9.

71. Krutz, G.W., Schueller, J.K., “Advanced Engineering: Future Directions for the Agricultural and Biological Engineering Profession.” Journal of Agricultural Engineering Research, 2000, Vol. 76, pp. 251 – 256.

72. Krutz, G.W., “Fluid Power Teaching Research Centers World-Wide.” International Journal of Fluid Power 3, No. 3 pp. 49-53, December 2002.

73. Sumali, H., Bystrom, E.P., and Krutz, G.W., “A Displacement Sensor for Nonmetallic Hydraulic Cylinders.” IEEE Sensors Journal, Vol. 3, No. 6, December 2003.

74. Chua, P., Krutz, G.W., “Steered and Propelled Water Powered Vehicle.” International Journal of Vehicle Design, Vol. 38, Nos. 2/3, pp. 179-195, 2005

7

C. Other Papers and Publications

1. Krutz, G.W. “Acceleration and Steady-State Pressure Drops in the Horizontal Pneumatic Conveying of Corn Silage and Haylage.” M.S. Thesis, University of Wisconsin, 1969.

2. Krutz, G.W. “A Thermo-Metallurgical Model Predicting the Strength of Welded Joints Using the Finite Element Method.” Ph.D. Thesis, Michigan State University, 1976.

3. Krutz, G.W. and Holt, D.A. “Fast Forage Harvester.” Final Report to John Deere, November 1977.

4. Krutz, G.W. “Engineering and Agricultural Mechanization Laboratory Exercises.” 1979 Fluid Power Educators Seminar Proceedings. Section 4.0. Pgs. 1-76.

5. Dull, D., Harlow, S., and Krutz, G.W. “Two Wheel Drive Assist Increase Tractor Traction.” SAE Paper No. 790813, September 1979. AES 7749.

6. Harlow, S., Krutz, G.W., Liljedahl, J.B. and Parsons, S.D. “Tire Lug Forces on Tractors with Front Wheel Drive Assist.” ASAE Paper No. 80-1029, June 1980. AES No. 8121.

7. “Auto Combine Project.” Confidential report to Ross Gear and IHC. 1980, 1981, and 1982.

8. Moreira, Sandra, Krutz, G.W. and Sun, C.T. “Simulation of Stresses Inside the Corn Kernels.” ASAE Summer Meeting, Orlando, Florida, ASAE Paper No. 81-3043, 1981.

9. Macqueene, J., Akau, R., Krutz, G.W. and Schoenhals, R. “Development of Inverse Finite Element Techniques for Evaluation of Measurements Obtained from Welding Process.” NSF Seminar, September 1981, University of Maryland.

10. Schueller, J., Krutz, G.W. and Thompson, L. “Industrial Hovercraft: A Current Design and Its Future Potential.” SAE Paper No. 810914, September 1981.

11. Harlow, S., Krutz, G.W., Liljedahl, J.B. and Parsons, S. “Relation Between Tractor Tire Wear and Lug Forces.” Seventh International Conference of ISTVS, August 17-20, 1981.

12. Krutz, Gary W., Thompson, L.J. and Strickland, R.M. “Evaluation of a Hydrostatic Transmission.” Proceedings of the 1981 Fluid Power Technical Update Seminar, August 11-13, 1981.

13. Amann, Craig and Krutz, G.W. “Interactive Hydraulic Circuit Design and Analysis.” Proceedings of the 1981 Fluid Power Technical Update Seminar, August 11-13, 1981. Copyright 1982 Purdue Research Foundation. ASME Computer Conference, August 18, 1982 and NFPC, November 1982.

14. Krutz, Gary W. and Gaultney, L. “Modeling Hydraulic Components with Differential Equations.” Proceedings of the 1981 Fluid Power Technical Update Seminar, August 11-13, 1981.

15. Gaultney, L., Gibson, H., Holt, H. and Krutz. G.W. “Will Wiping Type Herbicide Applicators Work for Wood Plant Control?” Presented at the 1981 ASAE Winter Meeting, ASAE Paper No. 81-1506, December 15-18, Chicago, IL.

16. Sahm, W.C., Liljedahl, J.B., Doering, O.C., III, and Krutz, G.W. “Simulated Cob Salvage for Grain Drying Energy Production.” Presented at the 1981 ASAE Winter Meeting, ASAE Paper No. 81-3595, December 15-18, Chicago, IL.

17. “A Sales Forecasting Model.” Final report to Mudhog. ASAE Paper, June 1982.

8

18. Kruse, J., G.W. Krutz, and L.F. Huggins. “Microprocessor Based Combine Ground Speed Controller.” Presented at 1982 ASAE Summer Meeting, ASAE Paper No. 82-3040, June 27-30, Madison, WI.

19. Johnson, E., G.W. Krutz, J.C. Nye, D.H. Doster, and Paul Harber. “Modeling Combine Sales in U.S.” ASAE Paper No. 82-1025; AES No. 9092.

20. Mailander, M., G.W. Krutz and J. Schueller. “An Evaluation of Four Continuous Moisture Sensors on a Combine.” ASAE Meeting, December 14-17, 1982, ASAE Paper No. 82-1576, Chicago, IL.

21. Schueller, J., M. Mailander and G.W. Krutz. “Combine Feedrate Sensors.” ASAE Meeting, December 14-17, 1982, ASAE Paper No. 82-1577. Chicago, IL.

22. Gaultney, L.D., H.G. Gibson, G.W. Krutz and H.A. Holt. “Optimizing Herbicide Application with a Roller-Wiper.” Presented at 1982 ASAE Winter Meeting, December 14-17, 1982, ASAE Paper No. 82-1587. Chicago, IL.

23. Streicher, E.A., Krutz, G.W., Stroshine, R.L. and Hinkle, C.N. “Measurement of Combine Cleaning System Airflows.” ASAE, Summer 1983. ASAE Paper No. 83-1085.

24. Krutz, G.W. “Intelligent Machines for Agriculture in 1990.” September 12, 1983. SAE Paper No. 831269.

25. Krutz, G.W. “Justification of Robotics in Agriculture.” October 2-4, 1983, International Conference on Robotics and Intelligent Machines, Tampa, FL. ASAE.

26. Mailander, M., Schueller, J. and Krutz, G.W. “Processing Characteristics of the IH 1460 Combine.” ASAE, December 1983. ASAE Paper No. 83-1586.

27. Stwalley, R. III. “Can Seeds Germinate in Space?” Agricultural Engineering Magazine, March 1983, Pgs. 12-13. Krutz, one of three project advisors.

28. Krutz, G. and Mailander, M. “Automatic Combine.” 1983. October 2-4 International Conference on Robotics and Intelligent Machines in Agriculture.

29. Krutz, G.W., Harlow, S.D. and Nye, J.C. “An Interactive Graphic Hydraulic Simulation Program for Engineering Undergrads.” 1984 ASEE Annual Conference Proceedings, Session 1204, June 1984.

30. Krutz, G.W. “Future Uses and Justification of Robots in Agriculture.” Vol. 1BKG239, ASME International Computer Conf., August 1984.

31. Gaultney, L.D., Gibson, H.G., Krutz, G.W. and Holt H.A. “Laboratory Modeling of an Herbicide Roller-Wiper.” ASAE Paper No. 84-1005. June 1984, Knoxville, TN.

32. Hennessey, M. and Krutz, G.W. “STATTOL, a Tolerancing Program for Design Engineers.” ASAE Paper No. 85-1630.

33. Mailander M. and Krutz, G.W. “Predicting and Analyzing Combine Performance Through Dynamic Simulation.” ASAE Paper No. 85-1575.

34. Hinton, L.G., Gibson, H.G., Krutz, G.W. “Tractor Logging Simulation Overcoming Terrain Obstacle Problems.” ASAE Paper No. 85-1606.

35. Hennessey, M. and Krutz, G.W. “Graphics Package Enhances the Use of Statistical Tolerancing in Design.” UPCADEM Proceedings, Purdue University, July 1985, and ASAE Paper No. 85-1630.

36. Krutz, G.W. “Designing Steel Components in the Plastic Region.” Ag Engineering Magazine, March-April 1986.

37. Krutz, G.W., Doster, D. and Iwashita, M. “Forecasting Farm Equipment Sales in a Declining Market.” SAE Paper No. 861248.

9

38. Cho, S., Krutz, G.W., Stroshine, R.L. and Miles, G.E. “Correlation of Mass Flow Rate and Torque for Belt Conveying of Agricultural Material.” ASAE Paper No. 86-1570.

39. Krutz, G.W. and Castaldi, A. “Interactions of Gel with Soybean Seeds.” ASAE Paper No. 86-1513.

40. Cho, S., Krutz, G.W. and Miles, G.E. “A Multi-Sensing Device for Hydraulic Control Systems.” SAE Paper No. 871603.

41. Cho, S., Krutz, G.W., Jones, D.D. and Doster, D.H. “An Expert System for Forecasting Combine Sales in U.S.A.” SAE Paper No. 871695.

42. Cho, S., Krutz, G.W. and Miles, G.E. “Hydraulic System Control of Material Flow Rates with High Speed Resolution Capabilities.” SAE Paper No. 871866.

43. Cho, S.I. and Krutz, G.W. “Finite Element Analysis of a Permanent Magnet Design for a NMR Sensor that Detects Fruit Ripeness.” ASAE Paper No. 88-1579.

44. Krutz, G.W. “Farm Machinery Research Needs.” Unpublished. 15 pgs. Agricultural Engineernig July/August. Pgs. 26-27. 1988.

45. Krutz, G.W. “Recent Advances in Japanese Fluid Power Technology.” ASAE Paper No. 88-1596.

46. Shull, A., Krutz, G.W., and Hinkle, C. “Algorithm to Display Complex Signal from IC Sensor.” ASAE Paper No. 88-1595.

47. Smith, M., Haghighi, K., Krutz, G.W., and Bennett, L. “Computer Aided Design of an Engine Bracket.” SAE Paper 881674.

48. Smith, M., Haghighi, K., and Krutz, G.W. “Finite Element Analysis and Optimization of an Engine Bracket.” ASAE Paper No. 88-1644.

49. Zhu, J., Krutz, G.W. and Haghighi, K. “Dynamic Analysis of an Engine Chassis Mount Bracket Using the Finite Element Method.” SAE Paper No. 881854.

50. Zhu, J., Krutz, G.W., Smith, M., and Haghighi, K. “Dynamic Performance of an Engine Mount System.” ASAE Paper No. 88-1643.

51. Smith, M.G., Haghighi, K., Krutz, G.W., Bennett, L., and Buchanan, J.W. “Finite Element Analysis and Design of a Diesel Engine Chassis Mount.” Presented at the 1988 Winter Annual Meeting, ASME Paper No. 88-WA/DSC-36, November 27-December 2, 1988, Chicago, IL.

52. Jia, J., Krutz, G.W., and Gibson, H.G. “Machine Vision for Locating Corn Plants from Moving Vehicles.” ASAE Paper No. 89-7058.

53. Cho, S.I. and Krutz, G.W. 1989. “Fruit Ripeness Detection by Using NMR Spectroscopy.” ASAE Paper No. 89-6620.

54. Castaldi, A. and Krutz, G.W. 1989. “Interaction of Gel with Soybean Seeds.” 1989 Trans. of the ASAE, Vol. 32, No. 5. September-October.

55. Cho, S.I. 1989. “Development of a Nuclear Magnetic Resonance Sensor to Detect Ripeness of Fruit.” Ph.D. Thesis.

56. Chaplin, J. and Krutz, G.W., et al. 1989. “Farm Machinery European Research.” Agricultural Engineering Magazine, Pgs. 14-19, 1990. NCR-143 Report.

57. Shull, A. 1989. “Hydraulic Motor Speed and Torque Calculation with a Microprocessor.” M.S. Thesis.

58. Krutz, G.W. 1989. “FPS - A Growing Society.” Fluid Power Society Newsletter. November. 1 pp.

59. Krutz, G.W. 1989. “Why Teach Fluid Power Courses at the College Level?” Fluid Power Society Newsletter. March.

10

60. Krutz, G.W. 1989. “ASME Initiative 1990 Mechanical System Design.” 9 pp. 61. Bellon, V., Cho, S.I., Eads, T.M., Stroshine, R.L., and Krutz, G.W. 1990. “Non-

destructive Sugar Content Measurement in Fruit Using H1 MR.” Institute of Food Technologists Annual Meeting, Paper 568, Session 54, June 16-20, Anaheim, CA.

62. Brubaker, J.R., G.W. Krutz, P. Nine and P. Ukrainetz. 1990. “Detasseler Electrohydraulic Position Control System.” ASAE Paper No. 90-1634. Winter meeting, December 1990.

63. Hitchcock, M.S., G.W. Krutz and K. Haghighi. 1990. “Alternate Methods of Hybrid Corn Plant Sterilization.” ASAE Paper No. 90-1536. Winter meeting, December 1990.

64. Jia, J., Krutz, G.W., Gibson, H.G., and Zhu, M.H. 1990. “An Image Processing Algorithm to Locate Corn Plants.” ASAE Paper No. 90-7042.

65. Krutz, G.W. and D.H. Doster. 1990. “When Should You Replace Your Farm Machines?” ASAE Paper No. 90-5006 Summer Meeting of ASAE, Columbus, OH. June 1990.

66. Krutz, G.W. and V. Bellon. 1990. “Pesticide Determination on Fruit Surfaces.” Technical Report to CEMAGREF. December 1990.

67. Bellon, V., S.I. Cho and G.W. Krutz. 1990. “Review on Water Peak Suppression in Pulse H1 NMR Spectroscopy.” Technical report to the Department of Energy. Agricultural Engineering Department, Purdue University, West Lafayette, IN.

68. Hitchcock, M.S., Krutz, G.W., Haghighi, K. and Gibson, H.G. 1991. “Water Jet and Laser Cutting of Corn Tassels.” Applied Engineering in Agriculture.

69. Krutz, G.W. and Bellon, V. 1991. “Pesticide Measurement on Fruit and Vegetable Surfaces.” Presented at IFT Summer Meeting, June 1991.

70. Krutz, G.W., Petersen, P., Rudemo, M. and Precetti, C.J. 1991. “Identification of Weed Seeds by Color Machine Vision.” ASAE Paper No. 91-7558. Winter Meeting, December 1991.

71. Cho, S. I., Wai, W. K., Krutz, G.W., Stroshine, R. L. 1991. “Prototype of Non-Destructive Fruit Sweetness Sensor.” ASAE Paper No. 91-3524. Winter Meeting of ASAE, Chicago, IL. December 1991.

72. Cho, S. I., Krutz, G.W., Stroshine, R. L., Wai, W. K. 1991. “Expert System for Water Peak Suppression in Pulsed Proton Magnetic Resonance.” ASAE Paper No. 91-7511. Winter Meeting of ASAE, Chicago, IL. December 1991.

73. Jia, J., Krutz, G.W. and Precetti, C.J. 1991. “Harvested Corn Cob Quality Evaluation Using Machine Vision.” ASAE Paper No. 91-6537. Winter Meeting of ASAE, Chicago, IL. December 1991.

74. Wai, W.K., Cho, S.I., Stroshine, R.L., Krutz, G.W., Haghighi, K. 1991. “FEM Solenoid Probe Coil for a Magnetic Resonance Fruit Sweetness Sensor.” ASAE Paper No. 91-7554. Winter Meeting of ASAE, Chicago, IL. December 1991.

75. Precetti, C.J., Danzart, M., Trystram, G. and Krutz, G.W. 1991. “Accuracy of Biscuits Size Measurement Using Machine Vision.” ASAE Paper No. 91-7534. Winter Meeting of ASAE, Chicago, IL. December 1991.

76. Krutz, G.W. and Precetti, C.J. 1991. “Automated Biscuit Inspection Using Machine Vision.” ASAE Paper No. 91-7535. Winter Meeting of ASAE, Chicago, IL. December 1991.

11

77. Stroshine, R.L., Cho, S.I., Wai, W.K., Krutz, G.W. and Baianu, I.C. 1991. “Magnetic Resonance Sensing of Fruit Firmness and Ripeness.” ASAE Paper No. 91-6565. Winter Meeting of ASAE, Chicago, IL. December 1991.

78. Cho, S.I. and Krutz, G.W. 1991. “Sensor Measures Sweetness.” Machine Design. August 8, 1991, P. 36.

79. Jensen, H., Precetti, C., Krutz, G.W. and Have, H. 1992. “Winterwheat Plant Detection and Density Evaluation for Site Specific Treatment.” Paper No. 921544, ASAE Winter Meeting, Nashville, TN.

80. Precetti, C.J. and Krutz, G.W. 1992. “A New Method for Color Vision Error Analysis.” Photonics Spectra International, December.

81. Yoo, S.N., Precetti, C.J., Krutz, G.W. and Cassens, D. 1992. “Wood Panel Color Matching.” Paper No. 923583, ASAE Winter Meeting, Nashville, TN.

82. Li, Y., Wai, W.K., Stroshine, R.L. and Krutz, G.W. 1992. “Nondestructive Sugar Content Measurements of Intact Fruit Utilizing Low Power Pulsed H1 NMR.” Paper No. 926598, ASAE Winter Meeting, Nashville, TN.

83. Li, Y., Stroshine, R.L. and Krutz, G.W. 1992. “Permanent Magnet Console Design for Nondestructive Fruit Ripeness Sensor.” Paper No. 926508, ASAE Winter Meeting, Nashville, TN.

84. Precetti, C.J. and G.W. Krutz. 1993. “Real-Time Color Segmentation.” Paper No. 933002, ASAE Summer Meeting, Spokane, WA.

85. Precetti, C.J. and G.W. Krutz. 1993. “Building a Color Classifer.” Paper No. 933003, ASAE Summer Meeting, Spokane, WA.

86. Precetti, C.J. and G.W. Krutz. 1993. “A New Seed Corn Husk Deduction System Using Color Machine Vision.” Paper No. 931012, ASAE Summer Meeting, Spokane, WA.

87. Ray, J.A., R.L. Stroshine, G.W. Krutz and W-K. Wai. 1993. “Quality Sorting of Sweet Cherries Using Magnetic Resonance.” Paper No. 936071, ASAE Summer Meeting, Spokane, WA.

88. Zhu, J., G.W. Krutz, S. Jiao and S. Yin. 1993. “Improvement of Dynamic Behavior for Towed Vibratory Roller.” Paper No. 932392, SAE International Off-Highway & Powerplant Congress & Exposition, Milwaukee, WI, Sept. 13-15.

89. Precetti, C.J., K. Haghighi and G.W. Krutz. 1993. “Color Image Analysis for Automatic Finite Element Mesh Generation.” SAE International Off-Highway & Powerplant Congress & Exposition, Milwaukee, WI, Sept. 13-15.

90. Precetti, C.J., K. Haghighi, G.W. Krutz and R.L. Stroshine. 1993. “Color Image Analysis for Finite Element Mesh Generation of Food and Biomaterials.” Paper No. 933575, ASAE Winter Meeting, Chicago, IL.

91. El-Behery, A. and G.W. Krutz. 1993. “Development of Beater-Type Stationary Thresher for Egyptian Wheat and Rice Conditions.” Paper No. 938518, ASAE Winter Meeting, Chicago, IL, December 14-17.

92. Megahed, M.M., G.W. Krutz and D.H. Doster. 1993. “The Economic Evaluation of Wheat and Rice Under Egyptian Conditions.” Paper No. 938519, ASAE Winter Meeting, Chicago, IL, December 14-17.

93. Krutz, G.W. and H. Gibson. 1994. “New Methods to Achieve 100% Placement of Undergraduate Engineers.” SAE Paper 741749, September 13, 1994.

12

94. Haney, L., C. Precetti, H. Gibson, D. Cassens, G. Krutz. “Color Matching of Wood with a Real-Time Machine Vision System.” ASAE Paper No 94-3579, ASAE Winter Meeting, Atlanta, GA, December 13-16, 1994.

95. Stroshine, R.L., W.K. Wai, K.M. Keener, G.W. Krutz. 1994. “New Developments in Fruit Ripeness Sensing Using Magnetic Resonance.” ASAE Paper No. 94-6539, ASAE Winter Meeting, Atlanta, GA, December 13-16, 1994.

96. Krutz, G.W., Gibson, H. and Queiroz, D. 1995. “New Technology - New Vehicle Changes Between 1995-2005.” Trans. ISTVS, Nagoya, Japan, p1-8.

97. .Franca, A.L., Oliveira, L.S., Haghighi, K. and Krutz, G.W. 1995. “The Application of Adaptive Finite Element Analysis to Heat and Mass Transfer Problems.” Journal of Agricultural Engineering Research 62:49-60.

98. Queiroz, D., Gibson, G., Krutz, G.W. and Haghighi, K. 1995. “Steering Performance Analysis of Rubber Tracked Tractors Using Mechanical Systems Simulation.” ASAE Paper No. 951324, 21 pp.

99. Krutz, G.W., Gibson, H., Doster, H., Anderson, D., Huseman, K., Richards, W., Rulon, R. 1996. “Farmers Perspective on Machinery Until 2000.” In New Trends in Farm Machinery Development and Agriculture, SAE Special Publication, SP-1194, SAE.

100. Krutz, G.W. 1997. “Vision of Electro-hydraulic Research in the Next Decade.” Report to Caterpillar Corp. Dec. pp 1-60.

101. Davies, P., Maciejewski, A. and Krutz, G.W. 1997. “Prognostic and Diagnostic Analysis of Electrohydraulic Equipment.” Report to Caterpillar Corp. June 1997.

102. Zhang, M., Ludas, L.I., Morgan, M.T., Krutz, G.W., Precetti, C.J., “Applications of Color Machine Vision in the Agricultural and Food Industries.” SPIE 1998, Boston, MA, November 3, 1998.

103. Fadel, M.A., Krutz, G.W., Gibson, H.G., Morgan, M.T. “Technical Specifications of the Connection Between Servo valve and Hydraulic Motor and It’s Effect on the Electrohydraulic Control Systems Performance.” ASAE ATEC Conference, February 1998, Louisville, KY.

104. Elliot, P.W., Krutz, G.W., Haghighi, K., “New Parameters for Evaluations of Sports Surfaces.” Presented at the North American Conference on Biomechanics, August, 1998, Waterloo, Canada.

105. Fadel, M.A., Krutz, G.W., Morgan, M.T., Gibson, H.G., Morocco, R., February 2-7, 1998. “Design and Test of an Accurate Electrohydraulic Positioning System for Engine LASER Measurements.”

106. Krutz, G.W., Francheck, M., Maciejewski, Purdue University, Moots, P., Caterpillar, Inc., Bray, T., Labus, T., Leners, D., Wanke, T., Milwaukee School of Engineering, Orlando, FL, July 12-15, 1998. Purdue/MSOE/Caterpillar Strategic Partnership.

107. Elliott, P., Hodge, M., Krutz, G.W., ASAE, 2001, “Wood Properties Report.” 108. Krutz, G.W., Bystrom, E.P. “An Overview of Water Hydraulics and Current Research

at Purdue University.” International Workshop on Water Hydraulic Systems and Industrial Applications 2000, September 19, 2000, Hamburg, Germany. Five pages. ASAE paper #01-1070, July 2001 Sacramento, CA.

109. Krutz, G.W. “Automotive Hydraulics.” Purdue Engineering Extrapolations, Winter 1999-2000, p. 13.

110. Hitchcox, A.L., Krutz, G.W. “Water Hydraulics Downplays the “L” Word.” Hydraulics and Pneumatics, Vol. 53, No. 5, May 2000, pp.45-46.

13

111. Krutz, G.W., “Cool, Clear Water.” International 2000 Industrial Vehicle Technology Off-Highway, pp. 146-146.

112. E. Bystrom, G.W. Krutz, July 30, 2001. “Design and Analysis of a Non-Contact Hydraulic Cylinder Position Sensor.” ASAE Meeting Presentation, Sacramento, CA. Paper #01-1070.

113. G.W. Krutz, October 19, 2001. “New Energy Initiatives.” NFPA Meeting Presentation, Cleveland, OH. 2 pages.

114. P. Chalmers, G.W. Krutz, May 2001. “drip, drip, drip…” Mechanical Engineering. Pages 63-64.

115. P. Chalmers, G.W. Krutz, Dec. 2001. “Mowing with Water.” Mechanical Engineering. Pages-10.

116. G.W. Krutz, April 25, 2001. “Water Hydraulics at Purdue.” FPNI meeting, Hanover Fair, Hanover Germany.

117. http://pasture.ecn.purdue.edu/~ehcenter/doc/WaterHyd.doc 118. http://pasture.ecn.purdue.edu/~abe435/WH.html 119. Krutz, G.W., Krutz, T., Rutan, Mark, “What Does It Take To Retire?” SAE Technical

Paper Series. Paper # 2002-01-1331. Presented at SAE International Off-Highway Congress, March 19-23, 2002. Pages 10.

120. Cassens, Louis, Thomas, M., and Krutz, G.W., “Modified Water Powered Greens King VI Mower.” Society of Automotive Engineers, Inc. Paper No. 020H-75, 2002, March 19-23, 2002. 6 pages.

121. Krutz, Jill E., Thompson, David F., Krutz, Gary W., and Allemang, Randall J., “Design of a Hydraulic Actuator Test Stand for Non-Linear Analysis of Hydraulic Actuator System, Automation Technology for Off-Road Equipment.” June 2002, Pgs. 169-183, ASAE.

122. Liu, S., and Krutz, Gary W., “Easy 5 Model of Two Position Solenoid Operating Cartridge Valve.” ASME Paper #IMECE 2002-39335, November 2002.

123. Krutz, Gary W., and Monroig, Francisco, “Maha Distance Education Center.” Ferrara, Italy, July 2002.

124. Krutz, Gary W., “Clean Control: Water Hydraulic Systems More Eco-Friendly than Oil.” ASAE Resource, January 2002, Pgs. 7-8, Connections, Prairie Farmer Magazine 2002, and AGRICultures, Winter 2002.

125. Krutz, J.E., D.F. Thompson, G.W. Krutz, and R.J. Allemang. “Design of a Hydraulic Actuator Test Stand for Non-Linear Analysis of Hydraulic Actuator System.” Automation Technology for Off-Road Equipment. 169-183, June 2002.

126. Krutz, G.W., “Fluid Power Research Centres World-Wide.” International Journal of Fluid Power. 3:49-53, December 2002.

127. Thomas, Michael F., Krutz, G.W. “Hydraulic Component Test Stand and Component Dynamic Modeling.” Paper No. AETC03001. Presented at ICCHP International Conference on Crop Harvesting and Processing 2003. Pages 10.

128. Deckard, Aaron, Krutz, G.W. “Distance Education MS in Engineering Fluid Power Engineering.” Paper No. AETC03002. Written for presentation at AETC and ICCHP 2003 Conference, February 9-11. Pages 8.

129. Cassens, L., Krutz, G.W. “Improved Mechanical Energy Storage Devices for Hydraulic Systems.” Paper No. AETC03003. Written for presentation at ASAE Annual AETC & ICCHP, February 9-11, 2003. Pages 14.

14

130. Wilson, T.N., Krutz, G.W., and Elliott, P.W. “Design of Testing Apparatus and Proposed Standard for Static and Dynamic Loads on Athletic Floors.” Paper No. AETC03004. Presented at 2003 Agricultural Equipment Technology Conference sponsored by ASAE, February 9-11, 2003. Pages – 17.

131. Monroig, F.M., Sumali, H., Krutz, G.W., and Yagei, B. “Modal Properties of a Hydraulic Cylinder.” Paper No. AETC 03005. Pages -9.

132. http://pasture.ecn.purdue/~maha 133. Krutz, G. W. “Electrohydraulics.” Presented to Caterpillar, Inc. August 1, 2003. 134. Krutz, G. W. Speech presented to Eaton Corporation, University Days, Cleveland,

OH., August 7, 2003. 135. Krutz, G. W. “Fluid Power Teaching at Purdue.” Presented to Parker Hannifin

Corporation, University Days, Chicago, IL., August 11-12, 2003. 136. Krutz, G. W. Speech presented to Eaton Corporation, University Days, Cleveland,

OH., August 14, 2003. 137. Krutz, G. W. “MAHA Funds and Research Distance Education.” Presented to Parker

Hannifin Corporation, August 18, 2003. 138. Krutz, G. W., Deckard, A., presentation to Eaton Corporation, University Days,

Toledo, OH., August 21-22, 2003. 139. Krutz, G. W., “Hydraulics Research.” Presentation to Parker Hannifin Corporation,

September 11, 2003. 140. Krutz, G. W., “Distance Education Delivery of Fluid Power Curriculum.” Presentation

to NFPA Educator/Industry Summit, Indianapolis, IN., October 24-25, 2003. 141. Krutz, G.W., Sigurdson, C., “Distance Education MS Fluid Power Engineering.”

Conference on Cybernetics and Information Technologies, Systems and Applications, Orlando, FL, CITSA 2004, pg 23, ISBN 980-6560-19-1

142. Krutz, G.W., Deckard, A., Radtke, I., “Design of Power-Transmitting Hydraulic Hose with Integrated Controller Area Network and Life-Sensing Capabilities.” AETC 05003, Louisville, KY, ASAE, February 13-15, 2005.

143. Krutz, G.W., Lumkes, J., Ivantysynova, M., “MAHA Fluid Power Research Center.” AETC 05002, Louisville, KY, ASAE, February 13-15, 2005.

144. Krutz, G.W., Rusch, D., Brown, J., Ess, D., “Rotary, No-Leak Valve.” AETC 05006, Louisville, KY, ASAE, February 13-15, 2005.

145. Krutz, G.W., Sederlund, A., “Design of a High Pressure Relief Valve Comprised of Composite and Plastic Material.” AETC 05001, Louisville, KY, ASAE, February 13-15, 2005.

146. Krutz, G.W., Beck, M., “A Power Steering Valve for a Water Hydraulic Lawn Mower.” AETC 05004, Louisville, KY, ASAE, February 13-15, 2005.

147. Krutz, G.W., Liu, S., Yao, B., “Programmable Valves Enable Both Precision Motion Control and Energy Savings.” AETC 05005, Louisville, KY, ASAE, February 13-15, 2005.

D. International Papers

1. Krutz, G.W., Doster, D.H. “Influence of Increased Tractor Size on U.S. Farm Size.” Congress International Genie Rural Proceedings, April 1977, Cordoba, Spain.

15

2. Krutz, G.W., Holt, D.A. and Miller, Doug. “A New Process for Fast Field Drying of Alfalfa.” Second International Dri-Crops Conference Proceedings, University of Saskatoon, Saskatoon, CANADA, August 1978.

3. Macqueene, J.W., Akau, R.L., Krutz, G.W. and Schoenhals, R.J. “Numerical Methods and Measurements Related to Welding Processes.” Prepared for the 2nd International Conference on Numerical Methods in Thermal Problems, July 7-10, 1981, Venice, Italy.

4. Moreira, S.M.C., Krutz, G.W. and Foster, G.H. “Determinacao dos Parametros Necessarios a Simulacao do Impacto Mecanico em Graos de Milho.” Rev. bras. de armaz., Vicosa, 6(1):37-42, 1981.

5. Moreira, S.M.C., Krutz, G. and Sun, C.T. 1981. “istribuicao de Tensoes no Interior de Graos de Milho durante Impactos Mechanicos.” Rev. bras. de armaz., Vicosa 6(2):19-24.

6. Krutz, G.W. 1989. “ay Conditioning Machine.” Patent, Germany. 7. Bellon, V., S.I. Cho and G.W. Krutz. 1990. “ipeness Sensor Development Based on

NMR.” Paper for ACOFOP II, International Symposium on Automatic Control of Food Processes. November 14-15, 1990, Paris, France.

8. Cho, S.I., G.W. Krutz, V. Bellon and R.L. Stroshine.1990. “Non-destructive Ripeness Sensing Using Proton Nuclear Magnetic Resonance.” Paper No. P7.22 of AGENG 90, 24-26, October 1990, Berlin, Germany.

9. Jia, J. and G.W. Krutz. “Identification and Location of the Maize Plant with Machine Vision.” AGENG 90, International Conference on Agricultural Engineering, 24-27, October 1990, Berlin, Germany.

10. Krutz, G.W. 1990. “Machine Vision Opportunities in Agriculture.” Report Royal Veterinary and Agricultural University (KVL), Denmark.

11. Krutz, G.W. 1990. “Future of Site Specific Farming.” July. “Injection Spraying.” May 1990. Report KVL, Copenhagen, Hardi, Dronningborg, Tri-Agro.

12. Cho, S.I., Krutz, G.W., Bellon, V. and Stroshine, R.L. 1990. “Nondestructive Ripeness Sensing Using Proton Nuclear Magnetic Resonance.” Paper No. P7.22 of AGENG 90. October 24-26, 1990. Berlin, Germany.

13. Krutz, G.W. 1992. “Vehicles in Agriculture in the Next Decade.” Presented at the International Hi-Tech Forum, March 23-25. Osaka, Japan.

14. Stroshine, R.L., Krutz, G.W. and Li, Y. 1992. “Prototype of Non-Destructive Fruit Sweetness Sensor.” Lecture No. 9211-18, AGEN 92, June 1-4, 1992. Uppsala, Sweden.

15. Krutz, G.W. 1994. “Data Acquisition System for Farm Machinery Testing.” Cairo, Egypt Seminar Series, March 1994.

16. El-Behery, A., G.W. Krutz, Z. El-Haddad, and M. El-Anssary. 1994. “Low cost high efficiency portable Egyptian Thresher.” International Conference of Agricultural Engineering, Proceedings, Milan Italy, August 30, 1994.

17. Franca, A.S., L.S. Oliveira, K. Haghighi and G. Krutz. 1994. “Adaptive Finite Element Analysis of Food Drying.” Proceedings. International Conference of Agricultural Engineering, Part 2, pp. 779-780, Milano, Italy

18. Krutz, G.W. 1994. Keynote Speech: “Technology Sensors and Information Transfer That Will Affect Agricultural Vehicles in the Next Decade.” ISTVS, Nagoya, Japan, Proceedings, November 10, 1994. 10pp.

19. Kasprzak, C.A., Krutz, G.W., Luc, J.M. 1996. “Development of Testing and Evaluating Performance of Gerotor Hydraulic Motors as Pumps.” Paper No. 96A-15B.

16

International Conference on Agricultural Engineering, Madrid, Spain, September 23-26, 1996.

20. Krutz, G.W. 1996. “Future Development of Agricultural Machinery for Sustainable Agriculture.” Proceedings of International Conference on Agricultural Machinery Engineering, Seoul, Korea, November 12-15, 1996. pp. 108-125.

21. Fadel, M., G.W. Krutz, H.G. Gibson, and M.T. Morgan, “Design and Test Of An Accurate Electrohydraulic Positioning System for Engine LASER Measurements.” Rabat, Morocco, February 3, 1998.

22. Fadel, M., G.W. Krutz, H. White, “Dynamic Behavior of Servo Control Systems Utilizing an EASY5 Hydraulic System Model.” Tampere, Finland, May 26-28, 1999.

23. Krutz, G.W., Gibson, H.G., Cassens, D.L., Zhang, M., “Color Vision in Forest and Wood Engineering.” Scotland, July 1999.

24. Krutz, G.W. and F. Monroig, “MAHA Distance Educational Center.” Ferrara, Italy, 07/2002, FPNI.

25. Cassens, L.V., M.F. Thomas and G.W. Krutz, March 2002. “Water Hydraulic Energy Savings Vehicle.” Society of Automotive Engineering Conexpo, Las Vegas, NV. Sicfp03 Paper #1095-8 pages.

26. Liu, S., G.W. Krutz, and B. Yao. 11/2002. “EASY5 Model of Two Position Solenoid Operated Cartridge Valve.” American Society of Mechanical Engineers, IMECE2002-39335.

27. Chalmers, P. and G.W. Krutz, December 2001, “Mowing with Water.” Mechanical Engineering. Page 10.

28. Krutz, G.W. Winter 2002. “Clean Control: Water Hydraulic Systems More Eco-friendly Than Oil.” Prairie Farmer Magazine.

29. Krutz, G. W., “Fluid Power Research Centers World-Wide.” International Journal of Fluid Power. 3:49-53, December 2002.

30. Krutz, G. W., Deckard, Aaron, “Distance Education MS in Engineering – Fluid Power Engineering.” Paper No. AETC03002. Presentation at AETC and ICCHP 2003 Conference, February 2003.

31. Krutz, G. W., “Distance Education Delivery of Fluid Power Curriculum.” NFPA Educator/Industry Summit, Indianapolis, IN., October 2003.

32. Krutz, G. W., “Distance Education MS in Engineering.” Paper in proceedings, 1st International Conference on Computational Methods in Fluid Power Technology. Melbourne, Australia. November 26-28, 2003.

33. Krutz, Gary W., Chua, Patrick S., “The Power of Water Hydraulics: an Applications Workshop.” AETC Louisville, KY., February 9, 2004.

PROGRAMS ATTENDED TO IMPROVE COMPETENCE Vickers Hydraulic School - August 1974 - Troy, MI - 2 wks Big Tractor Symp. - 1974 - Oklahoma - 1 day IHC Hydrostatic School - 1974 - Charlotte, MI - 2 days Graduate Teaching Workshop - 1974 - MSU - 2 days Teaching Improvement for Professors - 1977 - Purdue - 15 days Fluid Power Educators Sem. - 1977, 1979, and 1981 - Milwaukee, WI

17

(FPS School.) - 3 days ASAE Microprocessor Workshop - 1977 - Chicago, IL - 1 day Conference on Ag. Tech. for Dev. Nations - 1978 - U. of IL - 1 day Mobile Hyd. Design Symp. - 1978 - Milwaukee, WI (FPS School.) - 3 days FPS Hydrostatic Seminar - 1979 - Milwaukee, WI - 3 days Numerical Heat Transfer - 1979 - Swansea, Wales, UK - 5 days Case Studies - ASEE - March 28-30, 1979 - Columbia, SC. - 3 days Mobile Hydraulic Design Symposium - 1980 - Milwaukee, WI (FPI) - 1 day Finite Element Conference - 1980 - MIT, Boston, MA - 5 days NMR Systems in Biology - Sponsored by IBM, February 1983 - San Jose, CA IBM PC in service - April 1984 - Atlanta, GA - 4 days NSF Conference-Design Workshop - August 1987 NSF Mission - Japan Technology Assessment - July-August 1988 - 5 wks ASME Initiative 1990's - 1989 - 8 wks TEC - ASME - February 1991 Water Hydraulics – 2000 – Tampere Finland Water Hydraulics – April 21, 2001 Hamburg Germany – Hanover Fair

RADIO, TV AND POPULAR ARTICLES

1. “Log Splitter.” Michigan Farmer, 1976. 2. “Review of New Machinery.” Farm Industry News, April 1977. 3. “Combines on Automatic Pilot.” Mobile Farm Future, June 1977. 4. “Improved Traction - More Axles per Tractor.” Successful Farming, May 1977. 5. “You Should Understand How Hydraulic Systems Work.” Indiana Prairie Farmer,

September 1977. 6. “Hydraulic Systems Require Care.” Indiana Prairie Farmer, September 1977. 7. Radio - WBAA, October 7th, Hydraulic System Service, 1977. 8. “Is Now the Time to Buy a Tractor?” Successful Farming, December 1977. 9. “Equipment Size Decisions Vary Greatly.” Indiana Prairie Farmer, March 1978. 10. “Productions with Promise.” Farm Industry News, April 1978. 11. Raw Products Conference, Purdue, February 1978 “Hovercraft.” 12. “Indiana Farm Equipment Survey.” WBAA Radio, March 1978. 13. Purdue Agr. Engr. Dept. Samples Metric Needs, Agr. Engr., July 1978. 14. “Hydraulic Hoses - How and When to Replace Them.” Indiana Prairie Farmer, July 1,

1978. 15. “Filters Are the Primary Cause of Hydraulic System Failure.”Indiana Prairie Farmer,

July 15, 1978. 16. “What You Should Know About Hydraulic Fluids.” Indiana Prairie Farmer, August 15,

1978. 17. “Can Your System Handle the Job?” Indiana Prairie Farmer, August 19, 1978. 18. “Machinery Research - Automatic Combine.” Farm Bureau TV Network, December

1978. 19. “New Inventions to Watch.” Farm Industry News, January 1979.

18

20. “Improved Timeliness with Hydrostatic Transmissions.” Indiana Prairie Farmer, March 17, 1979.

21. “What Causes Hydraulic System Failure.” Indiana Prairie Farmer, April 7, 1979. 22. “Proper Calibration Important for Maximum Crop Profit.” Indiana Prairie Farmer,

April 7, 1979. 23. “Bearings - Do They Last Forever?” Indiana Prairie Farmer, April 21, 1979. 24. “Traction Reduction.” WBAA Radio, February 5, 1979. 25. “Hovercraft at Purdue.” TV - Channel 18, February 15, 1979. 26. “New Processes for Fast Field Drying Hay.” Cow-Calf Day Conference Proceedings,

April 1979. Purdue. 27. “Air Cushion Vehicle.” Indiana Canning Raw Products Conference Proceedings,

February 1979. Purdue. 28. “New at National Farm Machinery Show.” Farm Industry News. April 1979. 29. “New Process for One Day Hay Harvest.” Indiana Prairie Farmer, April 21, 1979. 30. “What You Should Know About Belts.” Indiana Prairie Farmer, May 5, 1979. 31. “Proper Care Extends the Life of Chains.” Indiana Prairie Farmer, May 1979. 32. “More Miles per Gallon, and Sharing a Ride Saves Money.” Family Living News.

Agricultural Information, May 1979. WBAA, June 4. 33. “Computer Puts Combine into Future.” Journal and Courier, Lafayette, IN, July 22,

1979. 34. “Buying Cars with Better Gas Mileage.” Journal and Courier, Lafayette, IN, July 22,

1979. 35. “More Miles per Gallon.” Family Living News, Coop. Ext. Service, May 22, 1979. 36. “Tractor Tires.” Indiana Prairie Farmer and WBAA, October 6, 1979. 37. “Preparation Aids Winter Driving.” Family Living News. Journal and Courier, Pg. 5,

December 23, 1979. 38. FIEI Interview on “Forecasting Problems Regarding Ag Machinery.” 1980. 39. “Clutches.” Prairie Farmer, 1980. 40. “Hydraulic System Care and Maintenance.” Prairie Farmer, 1980. 41. “Fluid Power Laboratories.” NC Regional Teaching Improvement Symposium, June 25-

27, 1980, Lincoln, NE. 42. “Hydraulic Fluids - What to Use?” Prairie Farmer, March 1981. 43. “It's Air Conditioner Repair Time.” Prairie Farmer, May 2, 1981. 44. “Car Filter Maintenance.” Family Living News, July 1981. 45. “Revolution on the Way.” South Bend Tribune, March 4, 1982. 46. “Should You Consider 4-Wheel Drive Assist for Your Tractor or Combine?” Prairie

Farmer, June 5, 1982. 47. “Show Products.” European-Style. March 1983. FIN 48. “Start Thinking About a Robot.” Florist Review. March 24, Pgs. 78-79. 49. “Combine Combines Technical.” Farm Savvy. EXTRAPO Purdue Engrg. Alumni Mag.,

Vol 10, No. 1, Fall 1982. 50. “Agricultural Engineers Looking Ahead: Plans For New Farm Equipment.” July 1983.

Citrus and Vegetable Magazine. Pgs 8 and 67. 51. “Computers in Agriculture.” TV 18. May 28, 1984. 52. “FishMaster.” SAE, Peoria, IL, May 19, 1986. 53. “Linear Traction Device.” TV 20, September 16, 1986.

19

54. “Use the Correct Bolt in All Repairs.” Prairie Farmer, August 15, 1987. 55. “How Sweet It Is.” Press release, February 1990. 56. CNN Special Report on “Ripeness Sensor” project, June 26-28, 1992, Worldwide TV 57. “Ripeness Sensor.” Press re-release, CNN Worldwide, July (Papers in Chicago,

Washington, New York, New Orleans, Los Angeles, etc.; inside R&D and Business Week, August 8, 1992.

58. “Combine Planter.” Farm Journal, Farm Industry News, 1992. 59. “A New System for Color Vision.” Photonics, December 1992. 60. “NMR Sensor May Bring Food Analysis to a Store Near You.” R&D Magazine, August

1993, pp. 17-18. 61. “Photonics and Food: From Farm to Market.” Photonics Spectra, September 1993, pp.76-

80. 62. “Future of Technology on Farm Vehicles.” Evansville Courier, Toledo, Chicago Tribune,

Lafayette Journal & Courier, Indianapolis Star, 1993. (Reported by Purdue Communications staff as the most requested article for photo and reprints to be published.)

63. Engineering Annual Report, 1993. 64. Ag School Annual Report and articles, 1993. 65. Ag School Annual Report article, 1994. 66. “A Plow and a Satellite to Steer Her By.” Omni Magazine, November 1994, p. 38. 67. “Basketball Floor Testing.” Purdue News Service, 1995, President's Report, 1996. 68. Parker Lab Usage, Purdue News Service, 1996. 69. “Water Hydraulic vehicle.” – ME, Machine Design, etc. 2001 70. “Pneumatic Air Boat Lift.” – Purdue University News Service, AgriCultures Magazine.

07/2002 71. “Students Build First Water Hydraulic Vehicle.” Purdue Agricultures Magazine, Purdue

Connections Newsletter, Agricultures Magazine. 2002 72. “Water-hydraulic Vehicle Built by Purdue Students.” – University News Service,

Lafayette Journal & Courier Newspaper (Newspapers). 02/2002 73. “Online Engineering Degree: Downsized economy pushes up value of e-learning.”,

Machine Design Magazine. February 20, 2003. 74. “Purdue Engineers Invent Boat Lift.” Marina Dock Age, March 2003 75. MAHA Fluid Power Center, Industry News. March, 2003. 76. “Global Sustainable Industrial Systems: Water-powered Mower: .environmentally

friendly lawn mower...under the direction of Gary Krutz, a professor in agricultural and biological engineering.” Purdue's Engineering Edge: Eight Signature Areas: Infinite Possibilities. May 2003. Purdue Offers Graduate-Level Engineering Courses Online – Hydraulics & Pneumatics, June 2003.

77. Article, Krutz, Gary, AMA 70th Anniversary Issue, Vol. 15, Tokyo, Japan, September 30, 2003.

78. “Fishing is great, now use bad bait!”, The Herald Journal, Monticello, IN, 6/17/04, Krutz, G.W.

79. “Weather affects (fisherman) fishing.”, The Herald Journal, Monticello, IN, 6/24/2004, Krutz, G.W.

80. “Tackle: what’s biting on what?”, The Herald Journal, Monticello, IN, 7/1/04, Krutz, G.W.

20

81. “Catching Fish on a hot day.”, The Herald Journal, Monticello, IN, 7/8/04, Krutz, G.W. 82. “Catfishing with Becky.”, The Herald Journal, Monticello, IN, 7/15/04, Krutz, G.W. 83. “Ticks and Trout.”, The Herald Journal, Monticello, IN, 7/22/04, Krutz, G.W. 84. “Mosquitoes, Weeds, Woodpeckers and Silver Bass.”, The Herald Journal, Monticello,

IN, 7/29/04, Krutz, G.W. 85. “Silvers are Gold.”, The Herald Journal, Monticello, IN, 8/5/04, Krutz, G.W. 86. “Fabulous Fall Fishing.”, The Herald Journal, Monticello, IN, 8/12/04, Krutz, G.W. 87. “Tackle Tips.”, The Herald Journal, Monticello, IN, 8/19/04, Krutz, G.W. 88. “Lazy Days Go Drifting By.”, The Herald Journal, Monticello, IN, 8/26/04, Krutz, G.W. 89. “Time to get ready for ICE fishing.”, The Herald Journal, Monticello, IN, 9/2/04, Krutz,

G.W.

CONSULTING, PROGRAMS John Deere (Unpublished Report) Farm Industry News Organizer F.P.S. Educators Session, Purdue Univ., Aug. 1979, Aug. 1981, and Aug. 1989 ASAE, Hydraulics Workshop - New Orleans, LA. 1979 Integral Hydraulics Langen & Co. - Dusseldorf, Germany TRW (Unpublished Report) Nine, Inc. Johnson Wax, Inc. (Unpublished Report), Ecuador Allis Chalmers, Sabbatical, 1982. (Unpublished Report) Ford Motor Company (Unpublished Report) IICA - Brazil Organizer, IBM Microcomputer Workshop, Purdue University of Florida, Sabbatical, 1983 ASAE - Marketing and Forecasting Workshop, December 1983 ASAE - Statistical Tolerance Design Workshop, December 1984 SAE - Statistical Tolerance Design Workshop, 1986 (2), 1987 (4), 1988 (2) Statistical Tolerance Design - Purdue, August 1986 Outdoor Electronics, LTD. DeKalb Pfizer Genetics Hydraulic Control Systems, 26 (50 min.) Videotapes, Purdue CEE, 1984 Entrepreneurial Engineering, 100 min. Videotape, 1986, ME463, Purdue Jack Oliver - Potato Waste Phil Dickerson - Walking Boat NSF - International Travel Grant - Japan (Mucia sponsored) Tippecanoe Manufacturing Sun Hydraulics ASME Initiative 1990's Pioneer Hi-Bred Ferraloy John Stephens Attorney KVL, Sabbatical, January-July 1990

21

CEMAGREF, Sabbatical, August-December 1990 Robert Wagstaff, Attorney New Technology - March 1992, Osaka, Japan Robotics Solutions, West Lafayette, IN, June 1992 Kentucky Fried Chicken, Louisville, KY Henny Penny, Eaton, OH Keynote Speech, ISTVS, November 1994. Caterpillar, 1997 Caterpillar acquisition evaluation

Ted Zelman, Attorney, Naples, FL 1999 Vedder, Price et al., Attorneys, Chicago, IL, 1999 Robbins, attorneys, et al., 1996 John Philips, Attorney, 1999 Brown, Todd, Attorney 1999 Keynote Speech – EuroAGEN, July 2000 Todd Dickinson – Grand Rapids, MI 2000-2001 Greg Heller – Philadelphia, PA 2001 Larry Laden – Austin, TX 2001 Paul Casi – Louisville, KY 2001-2006 Jarrod Ralph – Indianapolis, IN – 2004-05 Jon Whitehead – Kansas City, MO – 2005-06 Lea Player – Louisville, KY – 2005

RESEARCH GRANTS, 1977-PRESENT (LAST 5 YEARS IN EXCESS OF $2,000,000)

John Deere White Hydraulics TRW 3-M Mudhog Drive Systems New Holland Beatrice Aristokraft Ross Gear Weyerhaeuser David Ross Fellowships Time-Savers IHC Allis Chalmers Pioneer Hi-Bred Intl. DOE NSF Ford Motor Co. BARD Mag. Inst. Inc.

22

Robbins, Inc. Univ. Arizona-CID San Diego State-NARP Caterpillar, Inc. Milwaukee Cylinder Eaton Corporation MAHA Endowment for Distance Education Purdue University Cooperative State Research Service Jacobsen

COMMITTEE MEMBER FOR THE FOLLOWING GRADUATE STUDENTS Tony Ozogu PhD-AE 1979 Tractor in Rice Paddy Fathi Farah PhD-AE 1979 Tires Kevin Janni MSAE 1977 Finite Element Ground Water Flow Model Tim Strueh MSAE 1977 Non-thesis Abdulla Danok PhD-AgEcon 1979 Machinery Selection Doug Miller MS-Agron Hay Machine R. Gregorio PhD-AE 1978 Corn Harvesting T. Smith MS-AgMech Downtime Costs D. Tyler MS-AgMech Facts D. Bargiel MSAE 1979 Corn Cob Collection C. Sahm MSAE 1981 Cob Collection Energy J. Kulp MSAE 1983 Microprocessors R. Akau PhD-ME 1983 Welding E. Johnson MS 1982 Forecasting Combine Sales M. Duncan MS 1984 Materials Handling L. Kutz PhD 1985 Robotics L. Hinton MS 1986 Forest Harvesting M. Duncan MS 1989 Forest Chipper R. Muttiah MS 1989 Machine Vision M. Smith MS 1989 Finite Element Off Engine Bracket M. Cardinas-Weber PhD 1991 Expert Computer Vision System E. Kang PhD 1992 FEM - Grid Optimization D. Dux MS 1992 Sales Software J. Ray MS 1993 Fruit Sensor-NMR F. Wai PhD 1993 PFC Device J. McCauley PhD 1994 Site Specific Farming P. Elliott MS 1994 Sensor Vibration L. Haney MS 1995 Wood Color Vision - Co-major professor D. Queiroz PhD 1995 Combine Dynamics W. McVea PhD 1995 Design Database J. Schmidt PhD 1995 NMR Meat Fat K. Kelley MS 1995 Grain Wagon Safety W. Kwok PhD 1995 Mesh Generation FEM

23

P. Elliott PhD 1996 Floor Dynamics - Co-major professor T. Mendez MS 1996 Electrohydraulics J. Ready MS 1998 Control Systems N. Ki PhD 1999 Vehicle Dynamics C. Delgado MS 1999 Control-rate Acquisition F. Bu PhD 2002 ME Controls H. Sun PhD 2002 ME Controls S. Liu PhD 2004 Hydraulic Controls X. Dong PhD 2005 Food Temp Sensor G. Chen MS 2005 Temp Dist In Pump S. Liu PhD 2005 Hydraulic Controls G. Chen MS 2005 Distance Test C. Hanxin PhD 2005 Fault Diagnosis Hyd S. Sundararaman MS 2006 Hydraulics H. Masebu MS 2006 Non-Thesis

MAJOR ADVISOR TO THE FOLLOWING GRADUATE STUDENTS Topic SupportW. Wang MSE 1978 Non-thesis AES & Ross Gear M. Mailander MSE 1979

PhD 1984 Computer Combine AES & Ross Gear

J. Schueller MSE 1979 PhD 1983

Air Cushion Vehicle AES & Ross Gear

S. Harlow MSAE 1981 Tire Wear Mudhog S. Moreira PhD 1980 Corn Damage Brazil J. Kruse MSAE 1981 Combine Control TRW & IHC L. Gaultney MSAE 1980

PhD 1983 Compaction & Forest AES, Weyerhaeser

Weed Control C. Amann MSAE 1981 Hydraulic Simulation Deere/A. Chalmers J. Macqueene MSAE 1981 Welding Arc Efficiency NSF P. Harber MSAE 1981 Non-thesis – Forecasting Mudhog M. Evans MSAE 1982 Speed Torque Sensor White Hydraulics E. Streicher MSAE 1983 Combine Sensor TRW & Fellowship E. Mantovani PhD 1985 Compaction Brazil D. Hansen MS 1984 Rotational Displacement White Hydraulics

Sensor M. Hennessey MS 1985 Statistical Tolerancing White Hydraulics C. Barker MS 1986 Non-thesis Detroit Diesel S. Cho MS 1986

PhD 1989 High Volume Material Handling, NMR

TA, David Ross Fellowship, White

R. Memoria MS 1986 Gel Physical Properties EMBRAPA M. Iwashita PhD 1988 Combine Control Kubota Fellowship R. Bittner Ms 1987 Popcorn Husking Beatrice A. Shull MS 1988 Microprocessor/Sensor White Hydraulics

24

A. Castaldi MS 1989 Non-thesis Pioneer J.Jia PhD 1991 Vision System Pioneer M. Hitchcock MS 1990 Corn Detasseler Pioneer J. Brubaker MS 1990 Control System Interface White Hydraulics S. Awan MS 1992 NMR Electronic Circuits DOE C. Precetti PhD 1994 Corn Quality-Color Vision Pioneer A. El-Behery PhD 1994 Egyptian Combine NARP C. Kasprzak MS 1996 Pump Performance White M. Fadel PhD 1999 Servo Systems/Control White M. Zhang MS 1998 Color Vision for Tree I.D. Caterpillar E. Bystrom MS 2000 Cylinders Mil Cylinder R. Mumford MS 2001 Non-thesis Fairfield T. Wilson MS 2001 Sports Floor Test Std. Robbins J. Brown MS 2002 Rotary Valve Caterpillar S. Liu MS 2002 Non-thesis ME L. Cassens MS 2003 Energy Project Caterpillar M. Thomas MS 2003 Test Stand White/MAHA A. Deckard MS 2003 Smart Hose Eaton M. Wenger MS 2003 Plastic Cylinder Eaton D. Rusch MS 2003 Valve Leakage Eaton F. Monroig PhD 2003 Cylinder Propagation USDA P. Pawelski PhD 2003 Cylinder Positioning Caterpillar A. Sederlund MS 2004 Plastic Valve Eaton/MAHA M. Beck MS 2004 Water Steering MAHA I. Radtke MS 2004 Powered Hose Eaton/MAHA M. Bischoff MS 2005 Hydraulic Bicycle TAP J. Garcia MS 2005 Water Mower TA K. Harmeyer MS 2005 Smart Tire MAHA M. Holland MS 2005 Tire Sensor Fellowship

VISITING SCHOLARS (HOSTED BY PROFESSOR KRUTZ)

Area of Research Poul Pederson Denmark Machine Vision Laslo Janosi Hungary Fluid Power Eric Charbronnier France Controls Hans Jensen Denmark Wheat Yields V. Kaliyda Ukraine Failure Theories Paul Ukranitz Canada Fluid Power S. Yoo Korea Wood Color V. Bellon France NMR - fruit T. Hermman France Fluid Power J. Zhu China Vibration M. Megahed Egypt Machinery Economics

25

L. Kohsel Denmark Color Vision J. Wrona Poland Electro Hydraulics P. Chua Singapore Fluid Power

MAJOR NON-ACADEMIC ACCOMPLISHMENTS

1. Sold $125,000 in initial 6 months at dealership (1972). 2. Implemented dealership financial program to invest cash on hand. 3. Increased total sales 75% while managing dealership. 4. Designed Ford's complete line of backhoe buckets. 5. Redesigned all structural components of 3550S Ford TLB. 6. Designed manual and power steering systems for Ford's 1975 van. 7. Obtained MS in Economics at night school.

OTHER PROJECTS AND WORK EXPERIENCE Fathers Farm and Construction Firm (years prior to 1965). Larson Co., Green Bay, Wisconsin, 1965 (Summer). Time Study group

leader (4 employees). Evaluated process breakage and wastes. Dow Chemical, Midland, Michigan, 1966 (Summer). Plant Engineer.

Designed materials handling systems for a variety of plastics. University of Wisconsin, Madison, Wisconsin, 1967-68. Research

Assistant and inventor of pneumatic conveying equipment for agricultural materials. Instructor of Agricultural Engr., Michigan State Univ., 1974-76.

Product Planning studies of Agricultural equipment. Forecasted building construction and farm equipment segment of economy. Designed radiator, fan, raincap, cab isolator, instrument panel, and linkage systems on tractors. Tested seats and compared competitive tractor designs. Researched new Ford forage harvester. Evangelism Chairman for Church. High school and vocational Ag seminars. Radio and newspaper releases on hydraulics. Organized machinery exhibits for MSU's Farmer's Week Show. Advisor to ASAE Student Club Solved vibrational problems on Michigan Sod harvesting machine. Sold my own home (twice). Worked on dairy farm and built houses prior to college. Organized a softball league and outfitted the team with uniforms by acquiring a sponsorship. Assembly plant resident engineer. Organized two Fluid Power Educator Conferences at Purdue and one for ASAE. Organized Computer Workshop for 1984. General Manager - Outdoor Electronics Ltd., W. Lafayette, IN. Purdue SAE display 1984 and 1985, Milwaukee, WI Purdue Committees

26

Engineering Alumni Board Department Development Committee, Chairman Agricultural Research Advisory Agriculture Dean Search Committee International Programs Japan Initiative Undergraduate Recruiting Committee Agricultural School Planning Committee Engineering Education Committee Departmental Curricula, Chairman Departmental Social, Chairman Department Awards Committee Departmental Graduate Committee Departmental Computer Committee Department Head Search Committee Ag School Promotion Committee Engineering Grade Appeals Committee Departmental Recruiting Committee Freshman Engineering Curriculum (Chair 1994-95) Department CSRS Report - Engineering Teaching Section, 1994 University Faculty Outside Business Policy Committee, 1994 ASAE Teaching Awards Committee, 1994 ASAE Distinguished Lecture Series Committee, 1994 NCR-143 Committee (USDA) - Tractor Modeling ASAE PM-51 - Hydraulics FPS - Education Committee SAE - Advance Concepts Committee Organized many technical sessions for SAE and ASAE ASAE PM 54 – Distinguished Lectures 1998 – present Co-Developed computerized job search for engineering undergraduates. Marketed electronic computers to consumer industry. Developed Trade Show Displays. Boy Scouts - Engineer Badge Outdoor Activities - Fishing, Volleyball, Tennis, Golf Umpire - Little League Professors in Classroom - High School talks (6 per year). Started 1986. Faculty Advisor - Alpha Sigma Phi, 1987-88 Jury Duty - Tippecanoe County ASAE Nomination Committee Coach - Pony League Baseball Faculty Advisor - Undergraduate Students

PRESENTATIONS

Krutz, G.W. 10/19/2002. “New Initiatives – Energy Savings.” National Fluid Power Association Meeting. Cleveland, OH.

27

Krutz, G.W. 8/13/2002. Purdue University Parker Lab Review 2002. Parker Hannifin Corporation, Cleveland, OH. 18 PowerPoint slides. Krutz, G.W. T. Krutz, and M. Rutan. March 2002. “What Does It Take To Retire?” Society of Automotive Engineering Conexpo. Las Vegas, NV. 2002- 01-1331:10.

PATENTS Brown, R.J. and G.W. Krutz 12/2002. Valve patent disclosure. Disclosure (work in progress) Martin, M. and G.W. Krutz. 5/2002. Pneumatic Lift Patent Disclosure. Disclosure (work in progress). Rusch, D. M. and G. W. Krutz 02/2004. Two-way rotary valve with low leakage. Krutz, G.W., 2004. Life Sensing Hose. Krutz, G.W., 2005. Powered Hose. Krutz, G.W., 2005. Smart tire and tube.

RECENT MAJOR ACCOMPLISHMENTS

1. Increased enrollment of Agricultural Engineering students from 53 (Sophomores-Seniors)

to 130 in two years. This trend is continuing, reaching approximately 280 students as of July 1996. Advise freshmen (75 in 2002).

2. Initiated French undergraduate student exchange in 1990 and attempting Spanish

undergraduate student exchange in 1995.

3. In 1993 Fall Semester, seven French engineering undergraduates were in the Agricultural Engineering or Food Science Department and one U.S. student is in France. All are funded by research projects.

4. Development Committee Chair in ABE 1997-2003.

28