Upload
truongminh
View
222
Download
0
Embed Size (px)
Citation preview
1(4) DATA SHEET
The specifications described herein are subject to change without notice. Data sheet no. 5103001-20A_Control M Gas External_M_EN_2016_A
www.consilium.se
Gas Alarm Panel ModuleControl M Gas
ExternalPart no. 5103001-20A
System: CGD50/500
General DescriptionThe Control M Gas is a control panel with a 4.3"graphical colour display used to manage andsupervise a gas alarm system. Control M GasExternal can be mounted on any flat surface orflush mounted, independently from a gas alarmcabinet.
Control M Gas External is equipped withcommunication buses for connecting to thesystem via BBE interface RS-485 or BBE interfacePB-485.
Features:• A backlit 4.3" graphical colour display
• Alarm buzzer
• LED status indicators
• Backbone Bus Interface RS-485
• Backbone Bus Interface PB-485 (Power Boostloop)
• USB interface (for service & maintenance)
• Two configurable inputs
• Three programmable outputs
Refer to the User Guide for more information onoperating Control M Gas.
For details on assembling a system and definitionsof common system terms, refer to the InstallationManual.
DataOperating voltage range 22-48 VDC
Current consumption(at 24V)
92 mA
Ingress protection IP55
Operating temperaturerange
-5°C to +55°C
Weight 620 g
Display 4.3", 480×272 pixels, TFT
USB port USB 1.1 Embedded Host
RS-485 interface Isolated
2 digital inputs 24 VDC, open circuitsupervision
3 digital outputs 24 VDC max. 40 mA , nosupervision
Certified according to2531/yy
yy = year of production
Indicators and Buttons
Refer to the User Guide for more information.
AddressingAvailable addresses for Control M Gas Externalare between 1 and 10.
As a system master controller it must haveaddress 1.
DATA SHEET 2(4)
The specifications described herein are subject to change without notice. Data sheet no. 5103001-20A_Control M Gas External_M_EN_2016_A
www.consilium.se
Terminals
ConnectionsControl M Gas External mounts outside of thecentral.
Using ribbon cables connect the Control M Gasto Terminal M Gas.
Figure 1. Control M Gas connected to Terminal M Gas
3(4) DATA SHEET
The specifications described herein are subject to change without notice. Data sheet no. 5103001-20A_Control M Gas External_M_EN_2016_A
www.consilium.se
RS-485 TerminationTermination shall be made at each end of the bus(first and last module on the RS-485 segment)with a 120 ohm resistor. Two resistors (in a plasticpocket) are included in delivery.
For recommendations and examples on RS-485Termination, refer to the Installation Manual.
Module Dimensions (mm)
* Knockouts
** Mounting holes for wall mount
*** Mounting holes for inset