V600 SeriesLow Density

DescriptionDeveloped initially to provide an

economical seal between pickup truck caps

and body side rails. Today, Cap Tape® is usedeffectively for a variety of non-critical sealing applications, such as weather-stripping with our MW600 Series.

Gaska Tape's V600 series can be produced with or without adhesive on one side, as well as cast-on a permanent polyester film to the opposite side.

Performance Characteristics• V615 is cast-on a 2mil

polyester film to providedimensional stability, and isa self-wound product.

• Standard (G1) emulsionacrylic adhesive is used forlight duty substrates whichare clean and dry.

• Black color standard.• Other colors available upon request.

Industry Applications

• Transportation

• Retail Weatherstripping

• Automotive Aftermarket

• V610 has an easy release liner that

prevents stretching during

installation.

• V615 cast-on polyester film makes

product self wound; no paper to

scrap.

• Low-density foams easily conform

to irregular surfaces and curves.

• Inherently resistant to fire,

ultraviolet rays, most chemicals,

acids and solvents.

V610BK

• Formulated from durablePolyvinyl Chloride (PVC) fora long service life.

• Seals out air, condensation,light and dust whencompressed.

• Provides cushioning,vibration dampening, andsound deadening.

• V610 is cast-on aremovable bleached 83#white paper.

V615BK

V600 SeriesLow Density

Roll SizesCharacteristics common to all Gaska Tape closed-cell vinyl foam products include the ability to make a long life seal against air, moisture, light and dust penetration. They cushion and absorb vibration and shock. They also insulate in thermal, electrical and sound applications.

Benefits & Features

Available Thicknesses: .188" - .250" (4.8mm - 6.4mm)

Available Widths: 1.00" - 57" (25.4mm - 1448mm)

Available Lengths: 30' - 62' (9M - 18M)

Typical Physical Properties*

Test Method V600

ASTM D-1667 Density (lbs./cu.ft.) (kg/m3)

6

96

ASTM D-2240 Hardness (shore 00) 20

ASTM D-1667Compression Deflection @ 25% (psi) kPa

1.8

12

ASTM D-1667 Compression Set @ 25% 7

GTP (1) Water Absorption (% by volume) 1.2

ASTM D-412Tensile Strength (psi)kPa

22

152

ASTM D-412 Percent Elongation 140

ASTM C-518Thermal Conductivity (k factor)

(btu-in.)/(hr.sq.ft.) ('F) w/mK

0.26

0.037

Recommended Service Temperature ('F) ('C)

-40 - 180

-40 - 82

Recommended Application Temperature ('F) ('C)

50 - 110

10 - 45

Fungi Resistance Excellent

Oxidation Resistance Excellent

Weather Resistance Excellent

Notes: Available as V610, 83# white

bleached paper, foam, adhesive. Also available as V615, 2mm of polyester film, foam, adhesive. The standard thickness manufactured is 0.188" thick. Available up to 0.250" upon request of quotation.

(1) Gaska Tape Procedure

Typical performance properties and characteristics are based on samples tested and are not guaranteed for all samples of this product.

Data is intended as a guide only and is presented without guarantees and without assumption of liabilities resultant from the use of information provided. This data is not to be used for specification purposes.

Part Number Description

Product Designation Code

This is the first section of the description which outlines the product type, formulation, density, number of sides coated with adhesive and protective liner. See the following example.

Non-Standard Additions

Dimensions

V 15 2 0

Product or Formulation

E = Polyethylene ESL = Eco Seal V = Standard Vinyl Series A = Special Automotive C = Cling Foam CP = Plastics Cling Foam F = Fire Retardant (UL94) GHB = Gaska Hi Bond L = Log Tite LC = Low Compression MC = Improved Performance Vinyl MW = Weatherstrip Series SO = Semi Open Cell ULD = Ultra Low Density XP = Extra Plasticizer VK = High Compression Cell PVN =Polyvinyl Nitrile

2 = 2 pcf 6 = 6 pcf 15 = 15 pcf

Etc..

Density

0 = None 1 = 1 side 2 = 2 sides

Adhesive

0 = Cast on Paper 1 = None 2 = Cast on Aluminum 3 = Release Paper 4 = Laminated to Polyester Film

with Adhesive & Release Paper5 = Cast on Polyester Film 6 = Release Film 7 = Release Board 8 = Laminated to Polyester Film

with Adhesive & Release Board 9 = Other (Further information

necessary)

Protective Liner

This is the additional information which is included at the end of the code to specify other needs. Please note the proper order for consistency. Example as follows: V1520 NA RP XR

Colors Other and/or 2nd Protective Liners Other Specific Needs

XR = Extra Release NR = No Release SW = Stretch Wrap SC = Small Core RW = Reverse Wrap L = Lamination ER = Easy Release GS = Glove Skin TS = Top Skin CR = Completely Reverse Wrap

CP = Casting Paper Laminated ES = Polyester Film Laminated NF = 2 mil Natural Film PR = Polypropylene Film, PSA and Release Paper (PP, RP) DP = 2 Sided Release Paper (1st pass only) RP = 2nd Release Paper

NOTE: Custom jobs, materials die cuts, will have special designations as needed. Example: D5 AD 3NHDPE (W, CW, CM, etc.)

BE = Beige BK = Black BR = Brown BU = Blue GN = Green GY = Gray NA = Natural TN = Tan RD = Red

Following the product designation code in the part description are the dimensions of the product. The proper order is thickness, width and length. Note: Dimensions are sometimes not used - e.g. no specified length in reels, odd shaped die cut parts, some customer material thicknesses, etc. The follow example illustrates dimensions:

1.125 x 3.500 x 12

Thickness Width Length

In inches, up to 3 decimal places. In inches, up to 3 decimal places. In feet, up to two decimal places. If in inches, the " sign must be present.

Part Number Description

Adhesive RequirementsAt the end of the part description is the adhesive type and amount. The following example illustrates the adhesive designation:

A = Standard High Tack on Vinyl

B = Specialty for Rubber

D = General Purpose

E = Standard High Tack for PE

G = Low Temperature

L = Low Energy Surfaces

M = Standard Laminating Adhesive

S = High Performance Acrylic

1 = 1.2 mils

2 = 1.6 mils

3 = 2.6 mils

4 = 3.5 mils

A 3

Type of Adhesive Coating Weight (Dry Mils)

Shop for other RV Maintenance on our website.