Gasket Packing Supplies

7/29/2019 Gasket Packing Supplies

http://slidepdf.com/reader/full/gasket-packing-supplies 1/5

GASKET & PACKING SUPPLIES

9

PUMP PACKINGS

Thermograf – CRBraided from flexible graphite andcarbon yarns. Use in pumps, mixers,agitators and other rotating equip-ment and on high pressure valves.

Temperature limit: 600˚F dynamicapplication, 900˚F static application.1 to 14 pH range. Shaft speeds to 3,500 fpm

Order No. Size (in) Lbs./Spool Ft/Lb.9089.00003 5/16 2 18.5

9089.00006 3/8 5 13.3

9089.00009 7/16 5 11.3

9089.00012 1/2 5 9.4

9089.00015 9/16 5 8.0

9089.00018 5/8 5 6.6

9089.00021 3/4 10 5.0

9089.00024 7/8 10 4.2

9089.00027 1 10 3.5

Thermopak 363General service interlock braid syn-thetic yarn packing, treated withpetrolatum lubricants and graphite.For rotary and centrifugal pumpshandling hot or cold water, mild acidsand alkalies and oils. 450˚F tempera-ture limit. 4 to 10 pH range. Shaft speeds to 1,500 fpm.


9089.00033 3/16 2 70.00

9089.00036 1/4 2 37.00

9089.00039 5/16 2 22.00

9089.00042 3/8 5 15.00

9089.00045 7/16 5 10.00

9089.00048 1/2 5 9.00

9089.00051 9/16 5 7.00

9089.00054 5/8 5 5.00

9089.00057 3/4 10 4.00

9089.00060 7/8 10 3.00

9089.00063 1 10 2.00

Valve Stem Packings

Thermopak 169Interlock braided from pure PTFE fil-ament yarn lubricated with a PTFEdispersion. Good for valve and slowspeed pump applications. 550˚Ftemperature limit. 0 to 14 pH range


9089.00177 3/16 2 31.00

9089.00180 1/4 2 22.00

9089.00183 5/16 2 15.00

9089.00186 3/8 2 or 5 10.00

9089.00189 7/16 5 9.50

9089.00192 1/2 5 7.00

9089.00195 9/16 5 5.00

9089.00198 5/8 5 4.00

9089.00201 3/4 10 2.50

9089.00204 7/8 10 2.00

9089.00207 1 10 1.00

Thermopak 174A graphite filled PTFE packing, withexcellent thermal conductivity andabrasion resistance properties. Willnot hydrolyse. Best choice for uni-

versal service. Shaft speeds to3,600 fpm. 500˚F temperature limit.0 to 14 pH range

Thermopak 161An interlock braided packing madefrom synthetic yarns impregnatedwith PTFE and treated with abreak-in lubricant.It is a good gen-eral service pump and valve pack-ing. 450˚F temperature limit. Shaftspeeds to 1,500 fpm.


9089.00141 3/16 2 40.00

9089.00144 1/4 2 22.00

9089.00147 5/16 2 14.00

9089.00150 3/8 5 10.00

9089.00153 7/16 5 7.00

9089.00156 1/2 5 6.00

9089.00159 9/16 5 5.00

9089.00162 5/8 5 4.00

9089.00165 3/4 10 3.00

9089.00168 7/8 10 2.00

9089.00171 1 10 1.50

Thermopak 172An interlock braided PTFE packingwith an inert lubricant. Use whereother PTFE packings glaze or hard-en from frictional heat. 500˚F tem-perature limit. 2 to 12 pH range.

Shaft speeds to 2,000 fpm.


9089.00069 3/16 2 29.00

9089.00072 1/4 2 21.00

9089.00075 5/16 2 14.00

9089.00078 3/8 5 8.00

9089.00081 7/16 5 7.00

9089.00084 1/2 5 4.50

9089.00087 9/16 5 4.00

9089.00090 5/8 5 3.25

9089.00093 3/4 10 2.00

9089.00096 7/8 10 1.50

9089.00099 1 10 1.00


9089.00105 3/16 2 38.00

9089.00108 1/4 2 22.00

9089.00111 5/16 2 14.00

9089.00114 3/8 5 10.50

9089.00117 7/16 5 7.00

9089.00120 1/2 5 4.50

9089.00123 9/16 5 4.00

9089.00126 5/8 5 4.00

9089.00129 3/4 10 3.00

9089.00132 7/8 10 2.00

9089.00135 1 10 1.00




90

374

5100 – Compressed

– Non-AsbestosA high performance syntheticsheet with nitrile binder.Excellent chemical resistance to

most petroleum products, solvents and mild chemicals. Lowcreep relaxation at high temperatures. Blue colour.• 800˚F temperature limit

Order No. Sheet Thickness (in) Sheet Size(in)9089.00210 1/64 60 x 60

9089.00213 1/32 60 x 60

9089.00216 3/64 60 x 60

9089.00219 1/16 60 x 60

9089.00222 1/8 60 x 60

Flexible Graphite

SheetingHigh resistance to extreme tem-

peratures, steam and chemicals.Low gas permeability and ther-mal expansion along with greatcompression and creep relaxation qualities. Available insheet form as well as die-cut gaskets, braided packing

(Thermograf ® ) and die-formed rings or tapes (Allgraph ® ).

• Temperature Limits: -328˚F to 932̊ F; steam: 1,200˚F• Pressure Limit: 5,000 PSI

• Nuclear Certifiable pH Range: 0-14 (except strong oxidizers)

Homogenous LaminatedOrder No. Size (in) Order No. Size (in) Thick (in)9089.00240 24 x 24 9089.00267 40 x 40 1/32

9089.00243 40 x 40 9089.00270 40 x 60 1/32

9089.00246 60 x 60 9089.00273 60 x 60 1/32

9089.00249 24 x 24 9089.00276 40 x 40 1/16

9089.00252 40 x 40 9089.00279 40 x 60 1/16

9089.00255 60 x 60 9089.00282 60 x 60 1/16

9089.00258 24 x 24 9089.00285 40 x 40 1/8

9089.00261 40 x 40 9089.00288 40 x 60 1/8

9089.00264 60 x 60 9089.00291 60 x 60 1/8

882 Commercial

Neoprene GasketingGood quality, low cost sheet thatoffers moderate resistance tooils, sunlight, mild mineral acids,alkalis, alcohols and solvents.• 250˚F temperature limit

• Plate surface finish

• 700 psi tensile strength

Order No. Thickness (in) Width (in)9089.00327 1/16 48

9089.00330 1/8 48

9089.00333 3/16 48

9089.00336 1/4 48

300 Red Rubber

GasketingMade from an SBR compoundresulting in a sheet soft enough tomake a tight fluid seal, strongenough to resist a blow-out.Suitable for use against hot orcold water, air and low pressuresteam. Available in both wrapperor smooth finish. Exceeds ASTM D 1330-78 Grade II.• 225˚F temperature limit

Order No. Sheet Thickness (in) Standard Width (in)9089.00294 1/32 36

9089.00297 1/16 36

9089.00300 1/16 48

9089.00303 3/32 36

9089.00306 3/32 48

9089.00309 1/8 36

9089.00312 1/8 48

9089.00315 3/16 36

9089.00318 3/16 48

9089.00321 1/4 369089.00324 1/4 48

Klinger Oilit® 3XA – AsbestosTop quality oil and gasoline-resistant sheet. Asbestos fibre

with NBR binder. Widely used in the oil and petro-chemicalindustries. Excellent resistance to oils and solvents, particu-larly suitable for use with refrigerants.

• Anti-stick: Eliminates the need for graphite or grease.

• Anti-corrosion: Surface asbestos fibres that cause corro-sion have been removed

• Anti-leak: Conforms to all the irregularities of flange sur-faces to provide increased micro-sealing

• Suggested maximum temperature: 1,000°F

Order No. Sheet Thickness (in) Sheet Size(in)9089.00225 1/64 60 x 80

9089.00228 1/32 60 x 80

9089.00231 1/6 60 x 80

9089.00234 3/32 60 x 809089.00237 1/8 60 x 80

Synthetic Rubber

Gasketing

925 EPDMA cost-effective and versa-tile material. Performs wellwith most acids, alkalis,ozone, water and stays flex-ible at low temperatures. General purpose gasketing mate-

rial for the pulp and paper industry. Albion 925-P is avail-able for higher temperature applications (330˚F). Not suit-able for use with petroleum products. Black colour.• 275˚F temperature limit

• 900 psi tensile strength ASTM D412


9089.00342 1/16 48

9089.00345 1/8 36

9089.00348 1/8 48

9089.00351 3/16 36

9089.00354 3/16 48

9089.00357 1/4 36

9089.00360 1/4 48




9

960 Red Silicone

GasketingSuperior mechanical, thermal,electrical and chemical prop-erties. Substantially more resistant to oils, glycol, acidsthan most elastomers. Odourless as well as tasteless, non-toxic and non-corrosive. Recommended for food and phar-maceutical applications.• 500˚F temperature limit

• 900 psi tensile strength ASTM D412

980 Viton® GasketingRetains its mechanical properties even at high temperaturesin most industrial process fluids. Excellent or use withpetroleum products, acids, alkalis, fluorine, chlorine, sul-phuric acid and other aggressive chemicals. Does notbecome brittle after prolonged exposure. Black colour.• 450˚F temperature limit

• 1,000 psi tensile strength ASTM D412

Pure Expanded

PTFE Joint SealantThick tape form with an adhe-sive back. Compresses into athin,wide ribbonwhich con-forms to surface irregularities. Ideal for maintenance, emer-gency repairs, or special design flanges.

Regular Spool Jumbo SpoolWidth (in) Order No. Length (ft) Order No. Length (ft)1/8 9089.00417 100 9089.00441 1000

3/16 9089.00420 75 9089.00444 750

1/4 9089.00423 50 9089.00447 500

3/8 9089.00426 25 9089.00450 250

1/2 9089.00429 15 9089.00453 150

5/8 9089.00432 15 9089.00456 150

3/4 9089.00435 15 9089.00459 100

1 9089.00438 15 9089.00462 75

2 — — 9089.00465 39


9089.00366 1/16 36

9089.00369 3/32 36

9089.00372 1/8 36

9089.00375 3/16 36

9089.00378 1/4 36

9089.00381 3/8 36

9089.00384 1/2 36


9089.00390 1/32 48

9089.00393 1/16 36

9089.00396 1/16 489089.00399 1/8 36

9089.00402 1/8 48

9089.00405 3/16 36

9089.00408 3/16 48

9089.00411 1/4 36

9089.00414 1/4 48

THERMOFAB ClothsAvailable in various styles,including texturized, high-tem-perature treated, and tackygasket cloth. Typical applica-

tions include curtains, dropcloths, fire blankets, stress-relieving, insulation, lagging,

dust filtration, scrubbers, cable-tray covers,safety apparel.

Thick. Weight Width Temp.Order No. Mfg. No. (in) (oz yd2) (in) Material ( F̊)9089.00468 2175 .032 17.5 40 Glass 1000

9089.00471 2175 .032 17.5 60 Glass 1000

9089.00474 2240 .060 24 40 Glass 1000

9089.00477 2240 .060 24 60 Glass 1000

9089.00480 2360 .075 36 40 Glass 1000

9089.00483 2360 .075 36 60 Glass 1000

9089.00486 GVC3500 .060 35 40 Treated glass 1500



9089.00495 110 .110 32 36 Ceramic wire insert 1800

9089.00498 84CH .026 18 36 Silica 3000

9089.00501 188CH .054 32 36 Silica 3000

THERMOFAB Woven TapesDeveloped as an efficient, high quality alternative toasbestos in hot-wrapping and energy-conservation applica-tions. Woven with selvaged edges to prevent unraveling.Typical applications include pipe and hose wrapping andhangers, thermal insulation, electrical applications, fabrica-tion of special gaskets and furnace door seals.* Must Advise Width of material when ordering

Mfg. Thick. Width Length Temp.Order No. No. (in) (in) (ft) Material ( F̊)9089.00504 150 1/16 1/2 – 6 100 Glass 1000

9089.00507 300 1/8 1/2 – 6 100 Glass 1000

THERMOFAB RopeSpecifically developed as analternative to asbestos in pack-ing and sealing applicationssuch as oven and furnace doorseals, wood-stove door seals, caulking and thermal insula-tion. Also suitable for seals in metal-casting molds.* Must Advise Diameter of material when ordering

Mfg. * Dia. Temp.Order No. No. Construction (in) Material ( F̊)9089.00510 267 Braided, f irm 3/16 – 1-1/2 Glass 1000

9089.00513 273 Braided 1/4 – 3 Glass 1000

9089.00516 274 Twisted 1/4 – 2 Ceramic 2300

9089.00519 275 Braided 1/4 – 2 Ceramic 2300

THERMOFAB

SleevingFor extreme-heat protectionof tubing, hoses, cables,wires, and thermocouple leads. Other applications includestress relieving, insulation and oven-door seals.* Must Advise Inside Diameter size when ordering

I.D. Thickness Temp.Order No. Mfg. No. (in) (in) Material ( F̊)

9089.00522 1000 1/4 to 4 .060 Glass 1000




90

376

Sheet Rubber• Materials available: SBR, Neoprene, Nitrile, EPDM,

Hypalon, Chute & Launder Lining, Viton, Silicone,Neoprene, Pure Gum, C.I. Packing, Red Sheet Packing,Butyl, Closed Cell Sponge, Urethane Sheet, Durashield

• Cut to size: specify Width and Length

Max. Max.Order No. Mfg. No. Gauge (in) Width (in) Length (ft)NITRILE SHEETING - WHITEDUROMETER SHORE A: 609089.00720 WNITI-.063 1/16 48 66

9089.00723 WNITI-.125 1/8 48 66

9089.00726 WNITI-.188 3/16 48 66

9089.00729 WNITI-.25 1/4 48 66

SBR 60 RUBBER - BLACKDUROMETER SHORE A: 60

9089.00756 SBRI60-.063 1/16 48 669089.00759 SBRI60-.094 3/32 48 66

9089.00762 SBRI60-.125 1/8 48 66

9089.00765 SBRI60-.188 3/16 48 66

9089.00768 SBRI60-.25 1/4 48 50

9089.00771 SBRI60-.375 3/8 48 50

9089.00774 SBRI60-.5 1/2 48 50

9089.00777 SBRI60-.625 5/8 48 50

9089.00780 SBRI60-.75 3/4 48 50

9089.00783 SBRI60-1 1 48 50

9089.00786 SBRI60-1.25 1-1/4 48 9

9089.00789 SBRI60-1.5 1-1/2 48 9

9089.00792 SBRI60-2 2 48 9

RED SHEET PACKING SMOOTH FINISHDUROMETER SHORE A: 80

9089.00795 RSPSI-.063 1/16 48 669089.00798 RSPSI-.125 1/8 48 66

9089.00801 RSPSI-.188 3/16 48 66

9089.00804 RSPSI-.25 1/4 48 33

Max. Max.Order No. Mfg. No. Gauge (in) Width (in) Length (ft)PURE GUM RUBBER - AMBERDUROMETER SHORE A: 409089.00591 PGI-.063 1/16 48 66

9089.00594 PGI-.125 1/8 48 66

9089.00597 PGI-.188 3/16 48 66

9089.00600 PGI-.25 1/4 48 66

9089.00603 PGI-.375 3/8 48 66

9089.00606 PGI-.5 1/2 48 66

9089.00609 PGI-.75 3/4 48 669089.00612 PGI-1 1 48 66

EPDMI RUBBER - BLACKDUROMETER SHORE A: 609089.00615 EPDI-.125 1/8 48 66

9089.00618 EPDI-.188 3/16 48 66

9089.00621 EPDI-.25 1/4 48 66

9089.00624 EPDI-.375 3/8 48 33

9089.00627 EPDI-.5 1/2 48 33

NEOPRENE SHEETING - BLACKDUROMETER SHORE A: 609089.00630 NEOI60-.031 1/32 48 66

9089.00633 NEOI60-.063 1/16 48 66

9089.00636 NEOI60-.094 3/32 48 66

9089.00639 NEOI60-.125 1/8 48 66

9089.00642 NEOI60-.188 3/16 48 669089.00645 NEOI60-.25 1/4 48 66

9089.00648 NEOI60-.375 3/8 48 33

9089.00651 NEOI60-.5 1/2 36 33

9089.00654 NEOI60-.625 5/8 48 33

9089.00657 NEOI60-.75 3/4 48 33

9089.00660 NEOI60-1 1 48 33

9089.00663 NEOI60-1.25 1-1/4 48 9

9089.00666 NEOI60-1.5 1-1/2 48 9

9089.00669 NEOI60-2 2 48 9

NITRILE SHEETING - BLACKDUROMETER SHORE A: 609089.00702 NITI60-.063-48 1/16 48 66

9089.00705 NITI60-.125-48 1/8 48 66

9089.00708 NITI60-.188-48 3/16 48 66

9089.00711 NITI60-.25-48 1/4 48 66

9089.00714 NITI60-.375-48 3/8 48 33

9089.00717 NITI60-.5-48 1/2 48 33

VibrapadsAnti-vibration Neoprene PadsMolded from neoprene and avail-able as standard, in both 18" and 6"

square sizes in load ranges from 25 to 300 psi. Easily cutto size to suit the application and can be stacked withoutimpairing the performance. 18" pads are molded separatelywith solid framing around the outside.

Order No. Mfg. No. Load Range (psi) Size (in)9089.03101 VP25 1-25 18 x 18 x 5/16

9089.03103 VP50 10-50 18 x 18 x 5/16

9089.03105 VP100 40-700 18 x 18 x 5/16

9089.03107 VP200 75-200 18 x 18 x 1/2

9089.03109 VP300 150-300 18 x 18 x 1/2

9089.03111 VP-25-6 1-25 6 x 6 x 5/16

9089.03113 VP-50-6 10-50 6 x 6 x 5/16

9089.03115 VP-100-6 40-100 6 x 6 x 5/16

9089.03117 VP-200-6 75-200 6 x 6 x 1/2

9089.03119 VP-300-6 150-300 6 x 6 x 1/2




9

Fiberfrax Ceramic

Insulation Blanket

This insulation is a strong, lightweight, flexible needledblanket that is made from spun ceramic fibres. Available ina wide variety of thicknesses, widths and densities.Ideal for use in furnace, kiln, reformer and boiler seals, lin-ings and insulation, casting mold wrappings, removeableinsulating blankets for field stress relieving welds, reuse-able insulation for steam and gas turbines, flexible hightemperature pipe insulation, fire protection.

Continuous MeltingUse Limit* Point Density

Order No. Colour ( F̊) ( F̊) (lb/ft3)9089.00525 White 2300 3200 4

9089.00528 White 2300 3200 6

9089.00531 White 2300 3200 8

Allpax Gasket CutterCuts all gasketing materialsincluding compressed asbestos,cork, rubber, PTFE and non-asbestos fibre. Cutting capacityis from 1/4" to 60" in diameterand up to 3/4" thick. Efficientand easy-to-use tool that elimi-nates waste and costly errors.Available in five convenient kitsto meet a broad range of cutting

requirements.

Order No. Mfg. No. Description Cap. (in)9089.00534 1 Gasket Cutter 12

9089.00537 2 Gasket Cutter 24




Order No. Mfg. No. Thick (in) Width (in) Max. Length9089.00564 RMB-.125 1/8 36 25 yds

Rubber Floor Matting - Black Wide Rib• Advise Length required.

Order No. Mfg. No. Thick (in) Width (in) Max. Length9089.00567 FM-.25 1/4 36 10 yds

9089.00570 FM-.375 3/8 36 10 yds

Anti-Fatigue Matting - Black Wide Rib1/8 Vinyl Face with Sponge Back• Advise Length required.

Hex Matting• Individual matting pieces can be

connected together

• Safety yellow beveled edgereduces trip hazard

Order No. Mfg. No. Description Thick (in)9089.00573 STAM 36" x 36" mat 5/8

9089.00576 STAM-CON Connector

9089.00579 STAM-EDGE Beveled edge

7" Heavy Duty

Wheel Chocks

Designed to prevent ‘creeping’ of thetruck or trailer while loading andunloading. Conveniently stores intruck cab or chains to loading dock.

With Nylon Carrying HandleFor easier carrying.

Made from heavy wallrubber to provide aresilient, durable bumper.Sold in pairs, includes allmounting hardware.

Order No. Mfg. No. Description

9089.00588 202206 6" Truck Bumpers w/ hardware, pairs

Order No. Mfg. No. Description9089.00582 202807 7" Wheel Chock

9089.00585 202807H 7" Wheel Chock with Nylon strap handle

6" Length

Truck Bumpers

• Interlocking with drain holes forself-cleaning; unique under-sidedpattern for greater traction

• 1” thick, black (made fromrecycled rubber tires)

• Grease and oil resistant

• Non-skid; hard wearing

• Ideal for assembly & prod-

uct lines, food preparation,industrial wash areas, etc.

Order No. Mfg. No. Size (in)

9089.00549 M100 15-1/4 x 15-1/4

9089.00552 MM200 15-1/4 x 5-3/4

9089.00555 MF300 15-1/4 x 5-3/4

9089.00558 M400 5-3/4 x 5-3/4 x 89089.00561 MMOD 27” x 42” Mat Complete; Includes:

2-M100, 3-MM200, 3-MF300, 4-M400

Mats & Ramps

Documents

Gasket Packing Supplies