Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Commonwealth of Australia Gazette
No. TC 19/03, Wednesday, 23 January 2019 Published by the Commonwealth of Australia
TARIFF CONCESSIONS
CONTENTS
TCO Applications ....................................................................................................... 2
TCO Applications Refused ........................................................................................ 4
TCOs Made.................................................................................................................. 5
Local Manufacturer Initiated - TCOs Revoked ........................................................ 8
Intention to Revoke TCOs not used in over 2 years ............................................... 9
TCOs Revoked - Unused for over 2 years ............................................................. 11
AAT Review of TCO Applications Results ............................................................. 14
The Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) is free of charge on the link below at: https://www.abf.gov.au/importing-exporting-and-manufacturing/tariff-concessions-system
The Tariff Concessions Administration Section is physically located at 5 Constitution Ave Canberra City 2601. The postal address for correspondence is shown in the relevant forms. Contact details: General Email Inquiries:………………………………[email protected] General Inquiries: (02) 6229 3567 TAPIN help desk: (02) 6275 6534
Cat. No.
ISSN 0813-8389
©Commonwealth of Australia, 2019
2 TCO Applications Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
TCO Applications
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.
Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described
are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days
of the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
Objections to the making of TCO submission forms are available at
https://www.abf.gov.au/importing-exporting-and-manufacturing/tariff-concessions-system/tariff-concession-order
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8422.30.90 LINEAR ROTARY LABELLING MACHINES, VIAL OR BOTTLE, programmable
logic controlled, having an output capacity NOT greater than
four hundred labels per minute
Op. 14.12.18 - TC 18246278
Stated Use:
For the application of self-adhesive labels onto bottles, vials
and containers
Applicant: HOSPIRA AUSTRALIA PTY LTD
50
5%
8431.43.00 PARTS, UNDERGROUND OR SURFACE DRILLING RIG, being ANY of the
following:
(a) arms;
(b) blocks;
(c) bodys;
(d) brackets;
(e) bushings;
(f) cases;
(g) chucks;
(h) collars;
(i) core lifters;
(j) cylinders;
(k) flanges;
(l) feet;
(m) frames;
(n) guards;
(o) guides;
(p) heads;
(q) hoists;
(r) holders;
(s) hoods;
(t) housings;
(u) jaw;
(v) lifting dog;
(w) landing shoulders;
(x) latches;
(y) links;
(z) manifolds;
(aa) mounts;
(ab) mufflers;
(ac) pistons;
(ad) plates;
(ae) racks;
(Continued on next page)
50
3 TCO Applications Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
(Continued from previous page)
(af) rails;
(ag) shafts;
(ah) sleeves;
(ai) slides;
(aj) spacers;
(ak) spears;
(al) spindles;
(am) stabilisers;
(an) swivels;
(ao) wear strips;
(ap) wedges;
(aq) weldments;
(ar) rotations units;
(as) rod holder units
Op. 02.01.19 - TC 1901494
Stated Use:
Goods are parts suitable for use solely or principally with
underground or surface drilling machines
Applicant: BOART LONGYEAR AUSTRALIA PTY LTD
5%
8454.30.00 CONTINUOUS CASTING LINE, COPPER WIRE, WATER COOLED, programmable
logic controlled, having ALL of the following:
(a) induction furnace;
(b) NOT less than 6 strand casting units;
(c) production capacity NOT less than 6 000 tonnes per annum
Op. 02.01.19 - TC 1901487
Stated Use:
Manufacture of oxygen free copper wire
Applicant: TYCAB AUSTRALIA PTY LTD
50
5%
4 TCO Applications Refused Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
TCO Applications R efused
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED
The application for the Tariff Concession Order for the goods described in the following TABLE has been
refused.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification
3920.20.00 SYNTHETIC PAPER, bi-axially orientated polypropylene, including
ALL of the following:
(a) thickness NOT less than 90 microns;
(b) density NOT less than 0.65 grams per cubic centimetre;
(c) calcium carbonate AND/OR titanium dioxide surface on
at least one side
Op. 10.08.18 - TC 18174281
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Taghleef Industries Pty Ltd, Wodonga, Vic
50
5 TCOs Made Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
TCOs M ade
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of
substitutable goods may request the revocation of TCOs at any time.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
3925.20.00 SUBMARINE VIEWPORTS, acrylic
Op. 03.10.18 Dec. date 21.01.19 - TC 18204292
50
4811.90.90 PAPERBOARD, coated, including ALL of the following:
(a) dispersion barrier coating on one OR both sides;
(b) bleached chemical pulp outer plys;
(c) bleached chemi-thermomechanical pulp
Op. 29.10.18 Dec. date 21.01.19 - TC 18217552
50
7326.90.90 BATH SUPPORT FRAMES, including ALL of the following:
(a) bath frames;
(b) adjustable feet;
(c) nuts AND washers;
(d) silicone sealant;
(e) adhesive tape
Op. 30.10.18 Dec. date 21.01.19 - TC 18219018
50
8419.89.90 MAGNESIUM ATOMISERS, CENTRIFUGAL, having ALL of the following:
(a) melting furnace;
(b) ingot feeder;
(c) atomising vessel;
(d) glove box;
(e) support structure including work platform;
(f) water cooled ductwork and bends;
(g) water cooling pipework and valves;
(h) cyclone discharge valves;
(i) induction motor AND drive unit;
(j) sealed water-cooled vibration conveyor with trash screen;
(k) collection vessels with OR without valves AND pressure
control;
(l) fans with OR without inverter drives;
(m) pneumatic slide;
(n) chillers;
(o) high frequency spindle motor drive inverter;
(p) cup balancing machine;
(q) water chiller and pump set;
(r) oxygen analysers AND/OR sensors;
(s) control panels with programmable logic control;
(t) load cells;
(u) cyclone unit;
(v) pressure control module;
(w) vessels
Op. 02.10.18 Dec. date 21.01.19 - TC 18203199
50
8421.29.90 FILTER PRESS, SOLID AND/OR LIQUID SEPARATION, having ALL of the
following:
(a) horizontally mounted filter plates OR plush plates AND
frames;
(b) double-acting hydraulic ram;
(c) manual AND automated operation
Op. 04.10.18 Dec. date 21.01.19 - TC 18204889
50
6 TCOs Made Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8428.90.00 UNSCRAMBLING MACHINES, PLASTIC BOTTLE, programmable logic
controlled, with OR without infeed AND/OR outlet
conveyors, having BOTH of the following:
(a) handling capacity NOT less than 300 bottles per minute;
(b) sizing components for ALL of the following bottle
sizes:
(i) diameter NOT greater than 72 mm and height NOT
greater than 132 mm;
(ii) diameter NOT greater than 83 mm and height NOT
greater than 191 mm;
(iii) diameter NOT greater than 95 mm and height NOT
greater than 260 mm
Op. 02.11.18 Dec. date 21.01.19 - TC 18220945
50
8433.60.00 POTATO SORTERS, optical, including ALL of the following:
(a) aligner;
(b) control interface;
(c) infrared detection;
(d) outlet belts
Op. 12.11.18 Dec. date 21.01.19 - TC 18225931
50
8438.50.00 CARCASS CLEANING LINE, program logic controlled, having ALL of
the following:
(a) pre-washing machine;
(b) wet whipper;
(c) scalding cabinet with OR without head scalder;
(d) de-hairing machine;
(e) orientation unit;
(f) dry whipper;
(g) flame-off singer;
(h) polishing machine;
(i) central lubrication for conveyors;
(j) elevators AND conveyors;
(k) carcass chute
with OR without lamella table
Op. 25.10.18 Dec. date 21.01.19 - TC 18216710
50
8441.80.10 LABEL CONVERTING MACHINES, having ALL of the following:
(a) varnish station;
(b) die cutter;
(c) slitter;
(d) unwinder AND rewinder;
(e) laminator;
(f) UV unit;
(g) gap setter;
(h) touch screen controller;
(i) infeed buffer
Op. 02.11.18 Dec. date 21.01.19 - TC 18221377
50
8464.90.00 DUNNAGE MACHINES, PLASTERBOARD, programmable logic controlled,
having ALL of the following:
(a) conveyor;
(b) saw feeder;
(c) glue station;
(d) stacker
Op. 28.09.18 Dec. date 21.01.19 - TC 18204297
50
8479.89.90 SNUBBERS, hydraulic, having ALL of the following:
(a) control valve;
(b) piston;
(c) compensating valve AND/OR reservoir
Op. 03.10.18 Dec. date 21.01.19 - TC 18204251
50
8479.89.90 SORTERS, DETECTION AND EJECTION, infrared, whether OR not
assembled, including graphic control panel
Op. 29.10.18 Dec. date 21.01.19 - TC 18218314
50
8479.89.90 SORTERS, DETECTION AND EJECTION, SCAN CAMERA, whether OR not
assembled, including graphic control panel
Op. 29.10.18 Dec. date 21.01.19 - TC 18218317
50
7 TCOs Made Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8514.10.00 OVENS, LAMINATING GLASS, having BOTH of the following:
(a) lifting elevator;
(b) buffer racks
Op. 30.10.18 Dec. date 21.01.19 - TC 18218690
50
8526.10.00 GROUND SURVEILLANCE RADAR, portable, having ALL of the following:
(a) ku band frequency operation;
(b) multiple sector scanning;
(c) ethernet interface;
(d) built in testing;
(e) 24 volt DC input power
Op. 12.11.18 Dec. date 21.01.19 - TC 18225932
50
8716.90.00 PARTS, CARAVAN AND/OR RECREATIONAL VEHICLE, being water
heater external access doors, including ALL of the following:
(a) doors;
(b) door frames;
(c) vents;
(d) door dimension NOT greater than of 380 mm x 380 mm
Op. 31.10.18 Dec. date 16.01.19 - TC 18219339
50
8903.99.10 BOATS, having ALL of the following:
(a) electric powered outboard OR inboard motors;
(b) solar cell powered AND/OR battery powered with mains power
charging socket;
(c) maximum carrying capacity NOT less than 9 people;
(d) water line length NOT greater than 9.5 m
Op. 06.11.18 Dec. date 21.01.19 - TC 18222464
50
8905.10.10 DREDGERS, multipurpose, self-launching, self-propelled, having
hydraulic front AND rear stabilisers, including ALL of the
following functions:
(a) self-loading AND unloading land transport;
(b) suction dredging;
(c) backhoe dredging;
(d) raking
Op. 05.11.18 Dec. date 21.01.19 - TC 18222206
50
9403.90.00 PARTS, TELESCOPIC TABLE, being table pedestal AND turntable
Op. 01.11.18 Dec. date 21.01.19 - TC 18219906
50
8 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
Local M anufac tur er Initiated - TC Os R evoked
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION
ORDERS REVOKED
The Tariff Concession Order for the goods described in the following TABLE has been revoked.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8413.50.90 PUMPS, POSITIVE DISPLACEMENT, internal combustion engine OR
electric motor, skid mounted, reciprocating plunger, having ALL
of the following;
(a) output NOT less than 188 l/min and NOT greater than
355 1/min;
(b) operating pressure NOT less than 770 bar and NOT greater
than 1 670 bar;
(c) integral dual helical reduction gearing
Op. 31.08.18 Dec. date 26.11.18 - TC 18186705
Substitutable goods produced in Australia in the ordinary
course of business by WOMA Australia Pty Ltd, Henderson, WA
50
20.12.18
9 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
Intention to Revoke TC Os not used i n over 2 years
TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS
The Comptroller-General of Customs is satisfied that the TCOs listed in the table below are no longer required
because, in the 2 years preceding the day of this notice, they have not been quoted in an import declaration
to secure a concessional rate of duty.
From Thursday, 21 February 2019, it is intended to take action to revoke these Orders under subsection
269SD(1A) of the Customs Act 1901. In accordance with subsection 269SG(2) of the Customs Act 1901, in transit
provisions shall apply. If revoked, the expected date of effect will be 21 February 2019.
Interested parties are invited to provide, by close of business, Wednesday 20 February 2019, written reasons
why an Order should NOT be revoked.
Please advise if any of the Orders listed below have been quoted on an import declaration.
If a request is made to retain an Order used for the granting of a Determination, please specify the
Determination and the linked Item number to enable mapping to the Order and its scope.
THE TABLE
______________________________________________________________________________________________________________
Tariff
Classification Description Concession Number
______________________________________________________________________________________________________________
3808.99.00 ACARICIDES, with active constituent being etoxazole
Op. 10.11.14 Dec. date 13.02.15 - TC 1439126
5703.20.00 ACTIVITY MATS, CHILDREN'S, printed, polyamide pile, having BOTH
of the following:
(a) mat surface area NOT greater than 6 square metres;
(b) weight NOT less than 270 grams per square metre
Op. 22.10.14 Dec. date 12.02.15 - TC 1437100
7211.13.00 FLAT BAR, alloyed steel, hot rolled, having ALL of the following:
(a) thickness of 14 mm;
(b) width NOT less than 200 mm and NOT greater than 300 mm;
(c) minimum yield strength NOT less than 325 Mpa;
(d) minimum tensile strength NOT less than 490 Mpa;
(e) minimum elongation greater than 17%;
(f) rolled edge condition;
(g) chemical composition by weight of ALL of the following:
(i) carbon content NOT greater than 0.20%;
(ii) manganese content greater than 1.20% and NOT
greater than 1.64%;
(iii) phosphorus content NOT greater than 0.035%;
(iv) sulphur content NOT greater than 0.035%;
(v) silicon content NOT greater than 0.55%
For the purposes of this order, tolerances allowable for (a) are
+/- 10%
Op. 11.11.14 Dec. date 28.01.15 - TC 1439186
7322.90.00 PARTS, HEAT EXCHANGER RADIATOR, being finned aluminium tubes,
each containing an inner stainless steel tube
Op. 23.10.14 Dec. date 19.01.15 - TC 1437802
8413.91.90 PARTS, CENTRIFUGAL PUMP, being back pull out unit having ALL of
the following:
(a) AC electric motor;
(b) diffuser;
(c) casing;
(d) flanges;
(e) seals;
(f) lifting points
Op. 06.11.14 Dec. date 02.02.15 - TC 1438757
10 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
8419.39.90 ATOMIZERS, CHEMICAL OR FOOD SOLUTION DRYER, epicyclic gear
drive, having interchangeable atomizer wheels, with OR without
electric motor
Op. 23.10.14 Dec. date 12.02.15 - TC 1437277
8419.89.90 RETORTS, ROTARY BATCH, STERILIZING AND COOKING
Op. 16.10.14 Dec. date 12.01.15 - TC 1436590
8419.89.90 MEDICAL WASTE STERILISATION MACHINES, electric, with OR without
control panel AND/OR waste receptacle
Op. 21.11.14 Dec. date 02.03.15 - TC 1441066
8431.39.00 ROLLERS, DOLLY TRACK, OIL AND GAS WELL
Op. 17.10.14 Dec. date 24.02.15 - TC 1436593
8479.89.90 INOCULATION LINE, programmable logic controlled, having ALL of
the following:
(a) plate streaker;
(b) inoculators;
(c) bar-coders;
(d) labelling module;
(e) plate dispenser with sorting function
Op. 14.11.14 Dec. date 09.02.15 - TC 1440475
8479.89.90 SKIMMING AND CLEANING MACHINES, aluminium batch furnace, self-
propelled, having all of the following:
(a) telescopic boom;
(b) interchangeable blades;
(c) joystick control;
(d) variable height operator cabin
Op. 20.11.14 Dec. date 02.03.15 - TC 1441048
8507.60.00 BATTERY PACKS, lithium polymer, having ALL of the following:
(a) battery capacity NOT less 3 000 mAh;
(b) input AND output voltage NOT less than 5V DC at 1A;
(c) universal serial bus port with cable;
(d) micro memory card slot;
(e) infrared laser;
(f) ultraviolet light;
(g) light-emitting diode torch
Op. 17.11.14 Dec. date 02.03.15 - TC 1440476
8516.90.00 END SUPPORTS, HEATER ELEMENT, BEARING OIL TANK
Op. 27.10.14 Dec. date 19.01.15 - TC 1437587
11 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
TCOs R evoked - U nused for over 2 years
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF THE COMPTROLLER-
GENERAL OF CUSTOMS
The Tariff Concession Orders listed in THE TABLE below have not been used for at least 2 years and have been
revoked under Section 269SD(1A). In transit provisions apply.
The intention to revoke these orders was notified in Gazette TC18/46 dated 28 November 2018.
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
3924.90.00 CANTEENS, depicting comic OR cartoon characters, having ALL of
the following:
(a) carry strap;
(b) protective travel hood;
(c) straw
Op. 28.12.93 Dec. date 09.08.12 - TC 1227734
2 Years non use. In transit provisions apply
50
25.12.18
3924.90.00 HANGERS, having BOTH of the following:
(a) fabric covered metal hook;
(b) fabric covered plastic rings
Op. 17.09.12 Dec. date 03.12.12 - TC 1235420
2 Years non use. In transit provisions apply
50
25.12.18
3926.40.00 IDENTIFIERS, DRINKWARE, plastic
Op. 17.07.12 Dec. date 03.10.12 - TC 1225547
2 Years non use. In transit provisions apply
50
25.12.18
3926.90.90 DRAINAGE BLOCKS, RAINWATER, plastic, interlocking, having BOTH
of the following:
(a) each drainage block length AND width NOT greater
than 1 000 mm;
(b) each drainage block height NOT greater than 250 mm
Op. 21.09.12 Dec. date 17.12.12 - TC 1236234
2 Years non use. In transit provisions apply
50
25.12.18
4202.92.90 BAGS, polyester, having ALL of the following:
(a) sewn in handles of polyvinyl chloride (PVC);
(b) zippered closure;
(c) metal name plate;
(d) length NOT greater than 280 mm
Op. 27.07.12 Dec. date 15.10.12 - TC 1227124
2 Years non use. In transit provisions apply
50
25.12.18
7308.90.00 MARINE BERTH MODULES, having ALL of the following:
(a) width NOT less than 16 m;
(b) length NOT less than 39 m;
(c) weight NOT less than 400 t
Op. 01.08.12 Dec. date 15.10.12 - TC 1227730
2 Years non use. In transit provisions apply
50
25.12.18
12 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
7308.90.00 STRUCTURES, STEEL, GAS STACK, VENT OR FLARE, including ALL of
the following:
(a) gas stack tubes;
(b) bracing;
(c) beams;
(d) ladders;
(e) handrails
Op. 15.10.12 Dec. date 07.01.13 - TC 1239299
2 Years non use. In transit provisions apply
50
25.12.18
7326.90.90 CONNECTORS, SUBSEA OIL AND/OR GAS EQUIPMENT, female union
Op. 07.06.12 Dec. date 03.09.12 - TC 1219534
2 Years non use. In transit provisions apply
50
25.12.18
8413.50.10 PUMPS, hydraulic diaphragm, downhole, whether OR not assembled,
having a hydraulic fluid reservoir
Op. 13.06.12 Dec. date 03.09.12 - TC 1219907
2 Years non use. In transit provisions apply
50
25.12.18
8417.90.00 PARTS, GAS BURNER, being gas mixers
Op. 21.08.07 Dec. date 20.07.12 - TC 1225149
2 Years non use. In transit provisions apply
50
25.12.18
8419.89.90 FOOD PROCESSING MACHINES, multifunctional, including ALL of the
following:
(a) cutters;
(b) mixers;
(c) stirrers;
(d) kneaders;
(e) emulsifiers;
(f) heater;
(g) coolers
Op. 17.07.12 Dec. date 03.10.12 - TC 1225401
2 Years non use. In transit provisions apply
50
25.12.18
8428.33.00 CROSS CONVEYORS, GLASS MAKING MACHINE, having cast iron girders
Op. 22.10.12 Dec. date 07.01.13 - TC 1240133
2 Years non use. In transit provisions apply
50
25.12.18
8474.31.00 CEMENT MIXING AND PUMPING MACHINERY, skid mounted, including ALL
of the following:
(a) triplex pump;
(b) centrifugal pumps;
(c) densitometer;
(d) diesel engine;
(e) NOT fewer than two displacement tanks;
(f) discharge hose;
(g) cement slurry mixer
Op. 20.09.12 Dec. date 17.12.12 - TC 1235867
2 Years non use. In transit provisions apply
50
25.12.18
8479.89.90 GLASS HANDLING MACHINES, LAMINATED GLASS ASSEMBLY LINE, being
EITHER of the following:
(a) assembly carriage station;
(b) polyvinyl butyral film application station
Op. 11.09.12 Dec. date 03.12.12 - TC 1234591
2 Years non use. In transit provisions apply
50
25.12.18
8480.71.00 MOULDS, CHAIR, nitrogen gas injection, hydraulically operated
overflows
Op. 17.08.12 Dec. date 12.11.12 - TC 1230403
2 Years non use. In transit provisions apply
50
25.12.18
13 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8480.71.00 INJECTION MOULDS, AUTOMOTIVE BUMPER COMPONENTS, having BOTH of
the following:
(a) moulded in sensor housings;
(b) hydraulic angular compact slide actuation
Op. 24.09.12 Dec. date 17.12.12 - TC 1236558
2 Years non use. In transit provisions apply
50
25.12.18
8503.00.00 FUEL CELL MODULES, ceramic, having an electrical output NOT less
than 500 W and NOT greater than 2 000 W
Op. 22.10.12 Dec. date 07.01.13 - TC 1240247
2 Years non use. In transit provisions apply
50
25.12.18
14 AAT Review of TCO Applications Results Commonwealth of Australia Gazette
No TC19/03, Wednesday, 23 Jan 2019
AAT Revi ew of TCO Applications Results
NOTICE OF RESULTS OF REVIEW OF A DECISION MADE UNDER PROVISIONS OF ADMINISTRATIVE APPEALS TRIBUNAL ACT 1975
The application lodged with the Administrative Appeals Tribunal under section 29 of the Administrative Appeals
Tribunal Act 1975 for a review of the decision by the Comptroller-General of Customs in respect of the Tariff
Concession Tariff Concession Order for the goods described in the following TABLE has been resolved.
The operative date (Op.) and TC reference number follow the description of goods.
The decision of the Administrative Appeals Tribunal follows the description of goods.
THE TABLE
Description of Goods including the
Customs Tariff Classification
Schedule 4
Item Number
7308.90.00 PARTS, BRICK CLADDING, being steel support trays AND/OR
interlocking steel rails, complying with Australian Standard/New
Zealand Standard AS/NZS 4284:2008
Op. 10.04.17 - TC 1738137
AAT Decision: WITHDRAWN by applicant and dismissed by the AAT
AAT Decision Date: 30 November 2018
50
Applicant PGH BRICKS & PAVERS PTY LTD