GAZETTE TC 13-03 Dated 23 January 2013 · PDF fileIndustrial Standard G3134 (JIS G3134) grade SPFH590 OR Japanese Industrial Standard G3113 (JIS G3113) grade SAPH440, having ALL of

Commonwealth

of Australia Gazette No. TC 13/03, Wednesday, 23 January 2013 Published by the Commonwealth of Australia

TARIFF CONCESSIONS

CONTENTS

TCO Applications ....................................................................................................... 2

TCO Applications Reworded................................................................................... 16

TCO Applications Refused ...................................................................................... 17

TCOs Made................................................................................................................ 18

Local Manufacturer Initiated - TCO Revocation Requests .................................. 19

Local Manufacturer Initiated - TCOs Revoked ...................................................... 20

TCOs Revoked Unused for Over 2 years ............................................................... 21

TCOs Intention to Revoke - Unused for Over 2 years .......................................... 22

Section 273 Determinations Made .......................................................................... 26

Amended notification AAT Review of TCO Applications Results....................... 27

The Australian Customs and Border Protection Service (Customs and Border Protection) publishes the Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) free of charge on the Customs internet site at: http://www.customs.gov.au

Please select “tariff”, then “tariff concessions gazette”. The gazettes are listed in date order and may be selected from the list of Adobe

(PDF) files.

General Inquiries: ..............................................................(02) 6275 6404 Facsimile: ...........................................................................(02) 6275 6376

Cat. No.

ISSN 0813-8389

©Commonwealth of Australia, 2013

2 TCO Applications Commonwealth of Australia Gazette

No TC 13/03, Wednesday, 23 Jan 2013

TCO Applications

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS

Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.

Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described

are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days

of the date of publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.

Submission forms are available from Custom Houses throughout Australia or on the Customs web site

www.customs.gov.au.

For guidance on the required description style, phone 02 6275 6404, fax 02 6275 6376 or email

[email protected].

THE TABLE

Description of Goods including the Schedule 4 Item Number

Customs Tariff Classification General Duty Rate

3924.10.00 KITCHENWARE, being silicon scrapers with stainless steel eyelet

Op. 21.12.12 - TC 1248835

Stated Use:

For preparation of food

Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD

50

5%

3926.90.90 BARRIER TUBES, FLOOD, polyvinylchloride, air inflatable AND

water filled, including fittings

Op. 28.12.12 - TC 1249043

Stated Use:

To act as a barrier to flood and storm waters

Applicant: FIRE FIGHTING TECHNOLOGIES INTERNATIONAL PTY LTD

50

5%

4419.00.00 KITCHENWARE, being rubberwood AND silicone rolling pins

Op. 20.12.12 - TC 1248561

Stated Use:

In the kitchen in the preparation of food

Applicant: MCPHERSON'S CONSUMER PRODUCTS PTY LTD

50

5%

6902.10.00 REFRACTORY BRICKS, having ALL of the following:

(a) magnesia (Mg0) content NOT less than 38%;

(b) calcium oxide (Ca0) content NOT less than 40%;

(c) silica (Si02) content NOT greater than 5%;

(d) bulk density NOT less than 2g/cc

Op. 24.12.12 - TC 1248853

Stated Use:

Refractory linings for furnace ladles

Applicant: ONESTEEL NSW PTY LIMITED

50

5%





7208.26.00 STEEL, flat rolled, iron OR non-alloy steel, hot rolled,

pickled, not coated, in coils, complying with Japanese

Industrial Standard G3134 (JIS G3134) grade SPFH590 OR Japanese

Industrial Standard G3113 (JIS G3113) grade SAPH440, having ALL

of the following:

(a) yield strength NOT less than 265 MPa and NOT greater than

600 MPa;

(b) tensile strength NOT less than 440 MPa;

(c) total elongation NOT less than 18% and NOT greater than

46%;

(d) in EITHER of the following sizes:

(i) thickness 3.20 mm and width 1 034 mm;

(ii) thickness 3.20 mm and width 1 350 mm

For the purposes of this Order, tolerances allowable for

specification (d) are:

(a) thickness +/- 10%

(b) width +/- 1%

Op. 28.12.12 - TC 1349335

Stated Use:

In PMV car body outer skins

Applicant: BLUESCOPE STEEL (AIS) PTY LTD

50

5%



Industrial Standard G3131 (JIS G3131), grades SPHC OR SPHD,

having ALL of the following:


325 MPa;



53%;

(d) in ANY of the following sizes:


(ii) thickness 1.40 mm and width 1 330 mm;

(iii) thickness 1.60 mm and width 1 228 mm;

(iv) thickness 1.80 mm and width 1 025 mm




(b) width +/- 1%

Op. 28.12.12 - TC 1349331

Stated Use:



50

5%







Industrial Standard G3134 (JIS G3134) grade SPFH590 OR Japanese

Industrial Standard G3113 (JIS G3133) grade SAPH440, having ALL

of the following:


600 MPa;



46%;



(ii) thickness 2.00 mm and width 836 mm;






(b) width +/- 1%

Op. 28.12.12 - TC 1349332

Stated Use:



50

5%

7209.16.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled, in

coils, not coated, complying with Japanese Industrial Standard

G3135 (JIS G3135), grade SPFC440 OR SPFC590, having ALL of the

following:


560 MPa;


(c) total elongation NOT less than 18%;


(i) thickness 1.20 mm and width 962 mm;



(iv) thickness 1.40 mm and width 715 mm;

(v) thickness 1.40 mm and width 1 182 mm;

(vi) thickness 1.40 mm and width 1 185 mm;

(vii) thickness 1.40 mm and width 1 302 mm;

(viii) thickness 1.60 mm and width 1 240 mm;

(ix) thickness 1.80 mm and width 1 132 mm;

(x) thickness 1.80 mm and width 1 166 mm;

(xi) thickness 1.80 mm and width 1 225 mm;

(xii) thickness 2.00 mm and width 890 mm;

(xiii) thickness 2.00 mm and width 990 mm




(b) width +/- 1%

Op. 28.12.12 - TC 1349343

Stated Use:



50

5%





7209.17.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled, not

coated, in coils, having ALL of the following;

(a) yield strength NOT greater than 210 MPa;







(iv) thickness 0.75 mm and width 1 640 mm;








(xii) thickness 0.80 mm and width 1 625 mm;

(xiii) thickness 0.85 mm and width 1 730 mm




(b) width +/- 1%

Op. 24.12.12 - TC 1248927

Stated Use:



50

5%


coated, in coils, having ALL of the following:

(a) yield strength NOT less than 185 MPa;
















(xiii) thickness 0.75 mm and width 1 555 mm;

(xiv) thickness 0.75 mm and width 1 710 mm;

(xv) thickness 0.75 mm and width 1 740 mm;

(xvi) thickness 0.75 mm and width 1 800 mm;

(xvii) thickness 0.80 mm and width 1 435 mm;

(xviii) thickness 0.80 mm and width 1 585 mm




(b) width +/- 1%

Op. 24.12.12 - TC 1248928

Stated Use:



50

5%






coated, in coils, complying with Japanese Industrial Standard

G3141 (JIS G3141) grades SPCC, SPCD OR SPCE having ALL of the

following:


265 MPa;



57%;









(b) width +/- 1%

Op. 28.12.12 - TC 1349338

Stated Use:

For use in PMV car body outer skins


50

5%

7209.17.00 STEEL, flat rolled, iron OR non-alloy steel, cold rolled,

not coated, in coils, complying with Japanese Industrial

Standard G3135 (JIS G3135), grades SPFC440, OR SPFC590, having

ALL of the following:


560 MPa;











(b) width +/- 1%

Op. 28.12.12 - TC 1349341

Stated Use:



50

5%






coated, in coils, complying with Japanese Industrial Standard

G3141 (JIS G3141) grades SPCC, SPCD OR SPCE, having ALL of the

following:


265 MPa;



57%;

(d) in EITHER of the following sizes:


(ii) thickness 0.40 mm and width 960 mm




(b) width +/- 1%

Op. 28.12.12 - TC 1349336

Stated Use:



50

5%

7210.30.00 STEEL, flat rolled, iron OR non-alloy steel, tin AND zinc alloy

electrolytically coated, in coils, having ALL of the

following:


370 MPa;



(d) total coating mass NOT less than 30 g/m2 and NOT greater

than 50 g/m2 on each side;

(e) thickness 0.40 mm and width 970 mm


specification (e) are:


(b) width +/- 1%

Op. 28.12.12 - TC 1349355

Stated Use:

For use in PMV car body outer skins


50

5%





7210.30.00 STEEL, flat rolled, iron OR non-alloy steel, tin AND zinc alloy

electrolytically coated, in coils, having ALL of the

following:


370 MPa;





(e) in ANY of the following sizes:





(v) thickness 1.00 mm and width 780 mm;

(vi) thickness 1.00 mm and width 840 mm;

(vii) thickness 1.00 mm and width 865 mm




(b) width +/- 1%

Op. 28.12.12 - TC 1349357

Stated Use:



50

5%

7210.49.00 STEEL, flat rolled, non-alloy steel, hot dipped galvannealed

zinc coated, in coils, having ALL of the following:

(a) yield strength NOT greater than 210 MPa;














(ix) thickness 0.95 mm and width 820 mm;

(x) thickness 1.00 mm and width 624 mm




(b) width +/- 1%

Op. 24.12.12 - TC 1248929

Stated Use:



50

5%







(a) yield strength NOT less than 190 MPa;




















(xv) thickness 0.65 mm and width 865 mm;


(xvii) thickness 1.00 mm and width 1 160 mm




(b) width +/- 1%

Op. 24.12.12 - TC 1248930

Stated Use:



50

5%



(a) yield strength NOT less than 165 MPa and NOT

greater than 325 MPa;


(c) total elongation NOT less than 35% and NOT

greater than 50%;

(d) total coating mass NOT less than 45 g/m2 and NOT

greater than 65 g/m2 on each side;

(e) thickness 2.00 mm and width 1 070 mm




(b) width +/- 1%

Op. 28.12.12 - TC 1349350

Stated Use:



50

5%








305 MPa;


(c) total elongation NOT less than 37% and NOT greater

than 57%;











(viii) thickness 0.70 mm and width 925 mm;

(ix) thickness 0.70 mm and width 930 mm;






(xv) thickness 0.70 mm and width 1 485 mm;


(xvii) thickness 0.75 mm and width 1 135 mm;

(xviii) thickness 0.75 mm and width 1 140 mm;

(xix) thickness 0.75 mm and width 1 625 mm;

(xx) thickness 0.75 mm and width 1 670 mm;

(xxi) thickness 0.80 mm and width 1 060 mm;

(xxii) thickness 0.80 mm and width 1 150 mm;

(xxiii) thickness 0.80 mm and width 1 200 mm;

(xxiv) thickness 1.00 mm and width 1 610 mm;

(xxv) thickness 1.20 mm and width 1 595 mm;

(xxvi) thickness 2.30 mm and width 985 mm




(b) width +/- 1

Op. 28.12.12 - TC 1349351

Stated Use:



50

5%







(a) yield strength NOT less than 155 MPa and NOT

greater than 295 MPa;



(d) total coating mass NOT less than 35 g/m2 and NOT

greater than 65 g/m2 on each side;




(iii) thickness 0.75 mm and width 840 mm;









(xii) thickness 1.60 mm and width 1 160 mm




(b) width +/- 1%

Op. 28.12.12 - TC 1349352

Stated Use:



50

5%




400 MPa;










(v) thickness 2.60 mm and width 1 230 mm




(b) width +/- 1%

Op. 28.12.12 - TC 1349354

Stated Use:



50

5%





7226.92.00 STEEL, flat rolled, alloy steel, cold rolled, complying

with Japanese Industrial Standard G3135 (JIS G3135), grade

SPFC980Y, having ALL of the following:


920 MPa;



22%;

(d) thickness 1.40 mm and width 435 mm




(b) width +/- 1%

Op. 28.12.12 - TC 1349347

Stated Use:



50

5%

7306.19.00 LINE PIPE, ELECTRIC RESISTANCE WELDED (ERW), complying with

American Petroleum Institute Standard Specification 5L (API 5L)

and International Standard 3183,(ISO 3183), having a diameter

exceeding 168.3 mm

Op. 18.12.12 - TC 1248298

Stated Use:

Transmission of gas in high pressure gas pipeline

Applicant: ARROW ENERGY LTD

50

5%

7308.90.00 SPACE FRAMES, SPHERICAL DISH, SOLAR CONCENTRATOR, having BOTH

of the following:

(a) maximum wind loading NOT greater than 147.6 kilometres

per hour;

(b) maximum force on base NOT greater than 170 000 kN

Op. 21.12.12 - TC 1248776

Stated Use:

Mounting of mirror panels which focus sunlight onto DC power

generation cells in concentrated photovoltaic power

configurations

Applicant: SOLAR SYSTEMS PTY LTD

50

5%

7311.00.00 TANKS, RECEIVER, welded, having BOTH of the following:

(a) maximum pressure capacity NOT greater than 19 barg;

(b) liquid volume capacity NOT less than 145 cubic metres

Op. 20.12.12 - TC 1248563

Stated Use:

For the supply of plant, instrument and feed air in a nitrogen

generation system

Applicant: AUSTRALIA PACIFIC LNG PROCESSING PTY LTD

50

5%





7326.20.00 STEEL WIRE FIBRES, deformed AND cut, cold drawn with hooked

ends, having ALL of the following:

(a) conforming to American Society for Testing and Materials

(ASTM) A820 type 1;

(b) length NOT less than 18 mm and NOT greater than

66 mm;

(c) diameter NOT less than 0.405 mm and NOT greater than

1.115 mm;

(d) tensile strength NOT less than 1 000 MPa;

(e) carbon content NOT greater than 0.095%

Op. 21.12.12 - TC 1248839

Stated Use:

For concrete reinforcement

Applicant: V L P PRODUCTS PTY LTD

50

5%

7326.90.90 COUPLINGS, TRAM, being tow bars including spherical bearings

Op. 21.12.12 - TC 1248771

Stated Use:

For the connecting and towing broken down tram carriages by a

tram recovery vehicle

Applicant: BOMBARDIER TRANSPORTATION AUSTRALIA PTY LTD

50

5%

7605.11.00 WIRE, aluminium, complying with Australian Standard 2848

(AS 2848)

Op. 21.12.12 - TC 1248836

Stated Use:

Aluminium wire for the manufacture of bare overhead

conductors

Applicant: PRYSMIAN TELECOM CABLES & SYSTEMS AUSTRALIA PTY LTD

50

5%

7907.00.90 JOINERS AND/OR TENSIONERS AND/OR HANGERS, METAL CABLE OR ROPE,

with OR without rubber pad, having BOTH of the following:

(a) serrated teeth;

(b) release mechanism

Op. 21.12.12 - TC 1248778

Stated Use:

For use in heating, air conditioning and ventilation

applications; for suspending mechanical and electrical services

and signage

Applicant: POLYPLAS PTY LTD

50

5%

8402.20.00 BOILERS, GAS WASTE, tubular, catalytic, having ALL of the

following:

(a) operating pressure NOT less than 6 000 kPa;

(b) operating temperature NOT less than 400 degrees Celsius;

(c) flow rate NOT less than 40 000 kg/h

Op. 21.12.12 - TC 1248840

Stated Use:

Production of high pressure, superheated steam for various

applications within a nitric acid production plant

Applicant: ORICA AUSTRALIA PTY LTD

50

5%





8419.81.90 DISPENSING MACHINES, having ALL of the following:

(a) one OR two OR three hoppers;

(b) mixing chamber for each hopper;

(c) tank OR water mains connection;

(d) proportion adjustment control;

(e) push button operation

Op. 21.12.12 - TC 1248837

Stated Use:

Push button fully automatic hot drink dispensing machine, for

dispensing of espresso, cappuccino, and latte hot drinks

Applicant: CANTARELLA BROS PTY LTD

50

5%

8428.90.00 PAPER ROLL HANDLING SYSTEM, programmable logic controlled, with

OR without lowerator up-ender AND/OR roller ramp with arrestor,


(a) paper length handling capability NOT less than 3 metres;

(b) paper roll weight NOT less than 3.5 tonnes;

(c) slat conveyors;

(d) shuttle conveyors;

(e) electrical and control cabinets

Op. 02.01.13 - TC 1349362

Stated Use:

For the transport of paper rolls

Applicant: VISY INDUSTRIES AUSTRALIA PTY LTD

50

5%

8429.59.90 BACKHOE LOADERS, wheeled, having ALL of the following:

(a) side shift backhoe;

(b) maximum speed NOT greater than 11 km/h in forward OR

reverse gears;

(c) diesel engine gross power output greater than 32 kW;

(d) self-levelling loader bucket, in both upward

and downward movement

Op. 20.12.12 - TC 1248692

Stated Use:

Excavation, digging, loading of earth materials in construction,

site works and related environments

Applicant: C.F.C. HOLDINGS PTY LTD

50

5%

8430.50.00 COMPACTORS, vibratory plate, pedestrian operated

Op. 20.12.12 - TC 1248559

Stated Use:

Pedestrian operated compaction of granular soils and asphalt

through the vibratory action of the base plate

Applicant: HITACHI CONSTRUCTION MACHINERY (AUSTRALIA) PTY LTD

50

5%





8479.89.90 CONTROL MODULE MOUNTING BASES, SUBSEA, whether OR not assembled,


(a) frame structures;

(b) baseplates;

(c) hydraulic tubing;

(d) connectors;

(e) return compensation system

Op. 20.12.12 - TC 1248602

Stated Use:

Mounting base for subsea control modules

Applicant: CAMERON AUSTRALASIA PTY LTD

50

5%

8479.89.90 WHEEL FLANGE LUBRICATION SYSTEM, TRAM, including ALL of the

following:

(a) casing AND/OR base support with flange to wheel housing;

(b) compressed air supply module AND control module;

(c) grease tank combination AND dosing system;

(d) pipe AND hose lines;

(e) spraying nozzles

Op. 21.12.12 - TC 1300437

Stated Use:

To work automatically for the sporadic lubrication of the wheels

to track to avoid seizing and similar

Applicant: BOMBARDIER TRANSPORTATION AUSTRALIA PTY LTD

50

5%

8479.90.00 PARTS, SUBSEA TEST TREE, OIL AND/OR GAS WELL, being latch

mandrels

Op. 28.12.12 - TC 1349360

Stated Use:

To space out the subsea test tree (SSTT) valves and helical

latch within the blow out preventer (BOP)

Applicant: SCHLUMBERGER AUSTRALIA PTY LTD

50

5%

8507.10.10 ACCUMULATORS, lead acid, 12 V, having all of the following:

(a) valve regulated (sealed);

(b) immobilised electrolyte;

(c) absorbent glass mat separators

Op. 24.12.12 - TC 1248842

Stated Use:

For use in motor vehicle interior installation

Applicant: EXIDE AUSTRALIA PTY LTD

50

5%

8507.10.90 ACCUMULATORS, MARINE, lead acid, 12 V, having all of

the following:

(a) valve regulated (sealed);

(b) immobilised electrolyte;

(c) absorbent glass mat separators;

(d) spiral wound plates

Op. 24.12.12 - TC 1248843

Stated Use:

Power source for fridges, lighting and as a starter

for an internal combustion engine

Applicant: EXIDE AUSTRALIA PTY LTD

50

5%

16 TCO Applications Reworded Commonwealth of Australia Gazette


TCO Applications R ewor ded

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION PARAGRAPH 269L(4B)(b) - PROPOSAL TO AMEND DESCRIPTION OF GOODS FOLLOWING AN

OBJECTION SUBMISSION

Amended descriptions have been proposed for the Tariff Concession Order applications shown in the following

TABLE.

Australian manufacturers who consider that there are reasons why the Tariff Concession Order as proposed to be

amended should not be made are invited to lodge a submission. Submissions must be lodged no later than 14

days after the publication of this Notice.


To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.

THE TABLE


Customs Tariff Classification

8481.40.00 VALVES, PRESSURE RELIEF, REFRIGERATION AND AIR CONDITIONING

Op. 09.10.12 - TC 1238194

Stated Use:

For the protection and control of equipment subjected to

pressures from air, gas, vapour, steam and liquid that may

exceed their design limits

Applicant: HELDON PRODUCTS AUSTRALIA PTY LTD

50

8504.40.90 BATTERY CHARGERS, closed loop control, having ALL of the

following:

(a) power rating greater than 2 kW but NOT greater than 30 kw;

(b) maximum output current greater than 50 A but NOT greater

than 500 A;

(c) simultaneously wet AND dry cell charging

Op. 05.10.12 - TC 1237923

Stated Use:

To charge wet and dry cell batteries simultaneously

Applicant: FASTCHARGE AUSTRALIA PTY LTD

50

17 TCO Applications Refused Commonwealth of Australia Gazette


TCO Applications R efused

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED

Applications for Tariff Concession Orders for the goods described in the following TABLE have been refused.

THE TABLE



8431.49.90 PARTS, EARTH MOVING AND/OR MINING MACHINERY, GROUND ENGAGING

TOOLS, being ANY of the following:

(a) tooth AND/OR teeth shapes;

(b) point shapes;

(c) adapters;

(d) edges;

(e) end bits;

(f) segments;

(g) wear plates;

(h) side cutters;

(i) corner gussets;

(j) scarifier shanks;

(k) tips;

(l) cutting edges;

(m) shrouds;

(n) hot slag pins

Op. 03.09.12 - TC 1233053

Reason for refusal:

Substitutable goods produced in Australia in the ordinary course

of business by Bradken Resources Pty Ltd, Kilburn, SA and Keech

Castings Australia Pty Ltd, Bendigo, Vic

50

8433.60.00 SORTERS, FRUIT AND/OR VEGETABLE, programmable logic controlled,

including ALL of the following:

(a) optical size sensors;

(b) optical colour sensors;

(c) discharge chutes;

(d) conveyors

Op. 20.08.12 - TC 1230661

Reason for refusal:

Substitutable goods produced in Australia in the ordinary course

of business by GP Graders (Victoria) Pty Ltd, Mount Waverley, Vic

50

18 TCOs Made Commonwealth of Australia Gazette


TCOs M ade

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE

Tariff Concession Orders have been made for the goods described in the following TABLE.

The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of

substitutable goods may request the revocation of TCOs at any time.

THE TABLE


Customs Tariff Classification Last Date of Effect

3808.93.00 HERBICIDES, technical intermediate, having a basis of NOT less

than 37% clethodim

Op. 05.11.12 Dec. date 21.01.13 - TC 1242279

50

3926.90.90 CHAIR MATS, HARD FLOOR, plastic, textured surface top

Op. 06.11.12 Dec. date 21.01.13 - TC 1242360

50

8414.59.90 BLOWERS, ROTARY PISTON, PNEUMATIC CONVEYANCE, pressure NOT

greater than 1 000 mbar

Op. 26.10.12 Dec. date 21.01.13 - TC 1241141

50

8421.19.00 CENTRIFUGES, SOLID FROM LIQUID SEPARATION, variable speed drive,

whether OR not assembled, having ALL of the following:

(a) maximum bowl speed NOT less than 3 700 rpm and NOT greater

than 4 100 rpm;

(b) maximum liquid flow capacity NOT less than 700 L/min

and NOT greater 1 000 L/min;

(c) maximum gravitational force NOT less than 2 700 g and NOT

greater than 3 300 g

Op. 05.11.12 Dec. date 21.01.13 - TC 1242274

50

8422.30.90 CARTON LABELLING MACHINES, programmable logic controlled, having


(a) labelling heads;

(b) stepping motors;

(c) belts;

(d) output capacity NOT greater than 450 cartons per minute

Op. 30.10.12 Dec. date 21.01.13 - TC 1241511

50

8479.89.90 CENTRIFUGES, BODY TISSUE AND/OR BODY FLUID, programmable logic

controlled, including ALL of the following:

(a) centrifuge;

(b) raw material and sample handling robotic arms;

(c) LCD screen

Op. 05.11.12 Dec. date 21.01.13 - TC 1242273

50

8484.20.00 CONNECTOR ASSEMBLIES, FLOWLINE, whether OR not assembled, having


(a) threaded studs;

(b) clamps;

(c) butt weld hubs;

(d) nuts;

(e) seal ring

Op. 30.10.12 Dec. date 21.01.13 - TC 1241372

50

8504.40.90 RECTIFORMERS, with OR without cooling module, direct current

output rating NOT less than 50 kA at 1 000 V

Op. 30.10.12 Dec. date 21.01.13 - TC 1241512

50

8513.10.00 LIGHTS, LED, battery powered, being slip-on finger lights

Op. 05.11.12 Dec. date 21.01.13 - TC 1242277

50

8714.91.00 FRAMES, BICYCLE, with OR without forks

Op. 31.10.12 Dec. date 21.01.13 - TC 1241566

50

19 TCOs Made and

Local Manufacturer Initiated - TCO Revocation Requests

Commonwealth of Australia Gazette




8716.40.00 TRAILERS, BICYCLE, stroller convertible, having ALL of the

following:

(a) universal attachment rod;

(b) quick release trailer wheels;

(c) retractable stroller front wheel;

(d) detachable stroller push handle;

(e) stroller parking brake

Op. 31.10.12 Dec. date 21.01.13 - TC 1241613

50

9603.90.00 DUSTERS, polyester microfibre, with plastic handle

Op. 08.11.12 Dec. date 21.01.13 - TC 1242620

50

Local M anufac tur er Initiated - TC O R evocation R equests

NOTIFICATION OF AN AUSTRALIAN INDUSTRY REVOCATION REQUEST - SECTION 269SC(1A) CUSTOMS ACT

An application has been lodged for revocation of the Tariff Concession Order set out in the following TABLE.

The Lodgement Request Date shown in the table below is the intended revocation date for the Tariff Concession

Order which will take effect should the application for revocation be successful.

Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an

order is backdated to the date of request for revocation.

THE TABLE


Customs Tariff Classification Lodgement Request Date

7225.40.00 PLATES OR SHEETS, high alloy steel, grain refined, quenched and

tempered, having ALL of the following:

(a) hardness NOT less than 570 HBW and NOT greater than 640 HBW;

(b) yield strength NOT less than 1 300 N/mm2;

(c) tensile strength NOT less than 2 000 N/mm2;

(d) elongation NOT less than 7%

Op. 18.11.09 Dec. date 19.03.10 - TC 0943669

50

14.01.13

20 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette


Local M anufac tur er Initiated - TC Os R evoked

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION

ORDERS REVOKED

The Tariff Concession Orders for the goods described in the following TABLE have been revoked.

THE TABLE



9405.10.00 LUMINAIRES, LIGHT-EMITTING DIODE (LED), non-ceramic, with or

without LED drivers

Op. 15.05.08 Dec. date 08.08.08 - TC 0808275

Substitutable goods produced in the ordinary course of business

by Coolon Pty Ltd, Hallam, Victoria. In transit provisions

apply.

50

21.11.12

9405.10.00 FLOODLIGHTS, non-ceramic, with or without globes that have a

rating NOT greater than 150 W

Op. 30.04.08 Dec. date 15.08.08 - TC 0825010



apply.

50

21.11.12

9405.10.00 LIGHTS, BAY, Light Emitting Diodes (LED), non-ceramic

Op. 20.08.08 Dec. date 14.11.08 - TC 0827293



apply.

50

21.11.12

9405.10.00 FLOODLIGHTS, non ceramic except for globe holder

Op. 23.02.09 Dec. date 12.02.10 - TC 1007362



apply.

50

21.11.12

9405.40.00 LIGHTING ASSEMBLIES, OBSERVATION WHEEL, comprising ALL of the

following:

(a) programmable light emitting diode (LED) tubing;

(b) integral power supply;

(c) computer controls;

(d) mounting racks

Op. 23.04.07 Dec. date 29.06.07 - TC 0705865



apply.

50

21.11.12

9405.40.00 LIGHTS, LED OPTIC COLOUR, modular, extruded or cast metal

Op. 05.05.08 Dec. date 01.08.08 - TC 0806480



apply.

50

21.11.12

9405.40.00 WORK LIGHTS, non-ceramic with OR without ceramic bulb holder

Op. 01.06.12 Dec. date 20.08.12 - TC 1218913



apply.

50

21.11.12

21 TCOs Revoked Unused for Over 2 years



TCOs R evoked U nused for Over 2 years

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF CUSTOMS

The Tariff Concession Orders listed in THE TABLE below have not been used for at least 2 years and have been

revoked under Section 269SD(1A). In transit provisions apply.

The intention to revoke these orders was notified in Gazette TC12/51 dated 19 Dec 2012.

Contact: Phone 02 6275 6404, fax 02 6275 6376 or email [email protected].

THE TABLE



8424.81 DUSTERS, knapsack type, hand operated, powder distributing

Op. 18.05.92 Dec. date 18.05.92 - TC 9204899

Revoked: 2 years non-use. In transit provisions apply.

50

16.01.13

8501.32.00 SERVO MOTORS, DC, SELF-COMMUTATING, having ALL of the following:

(a) permanent magnet stator, with magnets attached to the body

Of the motor;

(b) wound armature;

(c) tachometer, encoder or resolver;

(d) cylindrical housing having a diameter of NOT less than

55 mm but NOT exceeding 105 mm;

(e) continuous stall torque rating of NOT less than 0.2 N.m

but NOT exceeding 7 N.m;

(f) terminal voltage of NOT less than 40 V DC but NOT

exceeding 180 V DC;

but NOT including servo motors having gear boxes

Op. 20.02.98 Dec. date 08.05.98 - TC 9801548


50

16.01.13

8536.49 SWITCHES, where the first impulse to the coil operates the

contacts and where a second impulse to the same coil resets the

contacts to their original position, but NOT including

switches where a local manual reset returns the contacts to

their original position

Op. 01.01.88 Dec. date 17.02.94 - TC 9400997


50

16.01.13

22 TCOs Intention to Revoke - Unused for Over 2 years



TCOs Intention to Revoke - U nused for Over 2 years

COMMERCIAL TARIFF CONCESSION ORDERS (CTCOs) & TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS

The Chief Executive Officer (CEO) is satisfied that CTCOs and TCOs listed in the table below are no longer

required because, in the 2 years preceding the day of this notice, they have not been quoted in an import

declaration to secure a concessional rate of duty.

From Thursday, 21 February 2013, it is intended to take action to revoke these Orders under subsection

269SD(1A) of the Customs Act 1901. In accordance with subsection 269SG(2) of the Customs Act 1901, in-transit

provisions shall apply. If revoked, the expected date of effect is 21 February 2013.

Interested parties are invited to provide, by close of business, Wednesday, 20 February 2013, written reasons

why an Order should NOT be revoked.

Please advise if any of the Orders listed below have been quoted on an import declaration.

If a request is made to retain an Order used for the granting of a Determination, please specify the

Determination and the linked Item number to enable mapping to the Order and its scope.

Contact: Email [email protected], fax 02 6275 6376 or phone 02 6122 5540.

THE TABLE

Tariff

Classification Description Concession Number

8426.19.00 SHIP UNLOADERS, BAUXITE, rail mounted

Op. 07.09.09 Dec. date 27.11.09 - TC 0932965

8427.10.00 TRUCKS, PLATFORM, battery operated, comprising ALL of the

following:

(a) maximum load capacity NOT less than 6 tonnes and

NOT greater than 14 tonnes;

(b) maximum load lift height NOT greater than 0.8 meters;

(c) steer and lift remote controller;

(d) paved surface wheels and/or railway tracks wheels

Op. 30.08.05 Dec. date 12.12.05 - TC 0510935

8427.10.00 ORDER PICKERS, rider operated, having ALL of the following:

(a) lifting capacity greater than 1 950 kg at a 600 mm

load centres;

(b) maximum fork or platform lift greater than 799 mm

and less than 1201 mm;

(c) A/C powered steering with steering wheels;

(d) duplicate speed and raise/lower controls on the control

arms and the backrests

Op. 05.08.05 Dec. date 29.07.06 - TC 0612223

8428.33.00 FEEDERS, LOG AND SAWN TIMBER SAWLINE, PLC, belt driven

Op. 25.08.04 Dec. date 15.11.04 - TC 0408734

8428.33.00 CONVEYORS, TOILET AND/OR PAPER TOWEL ROLL

Op. 11.08.06 Dec. date 21.07.08 - TC 0817165

8428.39.00 RECLAIMERS, ROTARY SCREW, WOOD CHIP, comprising ALL of the

following:

(a) rotary screws;

(b) plates;

(c) slip rings;

(d) turrets;

(e) chutes

Op. 19.02.09 Dec. date 15.05.09 - TC 0905757




Tariff

Classification Description Concession Number

8428.39.00 TRANSFER LINE SYSTEM, MOTOR VEHICLE, single line

Op. 07.05.09 Dec. date 31.07.09 - TC 0915498

8436.99.00 AGRICULTURAL MACHINERY WHEELS AND/OR RIMS, drop centre, divided or

lock ring types, rated to 30 kmh maximum speed, in the sizes listed

in the table below:

TABLE

Drop Centre Types

Imperial measurement Metric measurement

in inches in millimeters

rim rim rim rim

diameter width diameter width

8" x 2.5" 203.2 x 63.5

8" x 3" 203.2 x 76.2

8" x 4.5" 203.2 x 114.3

10" x 3" 254 x 76.2

10" x 3.5" 254 x 88.9

10" x 4" 254 x 101.6

10" x 4.5" 254 x 114.3

12" x 3" 304.8 x 76.2

12" x 10.5" 304.8 x 266.7

14" x 3" 355.6 x 76.2

14.5" x 6.75" 368.3 x 171.45

14.5" x 7" 368.3 x 177.8

15" x 3" 381 x 76.2

15" x 9" 381 x 228.6

15" x 10" 381 x 254.0

15" x 13" 381 x 330.2

15.3" x 9" 388.62 x 228.6

15.5" x 8.25" 393.7 x 209.55

15.5" x 11.75" 393.7 x 298.45

15.5" x 13" 393.7 x 330.2

16" x 2.15" 406.9 x 54.61

16" x 3" 406.9 x 76.2

16" x 9" 406.9 x 228.6

16" x 11" 406.9 x 279.4

16.1" x 11" 408.94 x 279.4

16.1" x 14" 408.94 x 355.6

16.1" x 16" 408.94 x 406.4

16.5" x 6.75" 419.1 x 171.45

16.5" x 8.25" 419.1 x 209.55

16.5" x 9.75" 419.1 x 247.65

17" x 2.15" 431.8 x 54.61

17" x 11" 431.8 x 279.4

17" x 13" 431.8 x 330.2

17" x 15" 431.8 x 381.0

17.5" x 5.25" 444.5 x 133.35

17.5" x 6" 444.5 x 152.4

17.5" x 6.75" 444.5 x 171.45

17.5" x 8.25" 444.5 x 209.55

17.5" x 11.75" 444.5 x 298.45

18" x 2.15" 457.2 x 54.61

18" x 3" 457.2 x 76.2

18" x 5.5" 457.2 x 139.7

18" x 9" 457.2 x 228.6

18" x 11" 457.2 x 279.4

18" x 13" 457.2 x 330.2




18" x 14" 457.2 x 355.6

19" x 2.5" 482.6 x 63.5

19" x 3" 482.6 x 76.2

19.5" x 6" 495.3 x 152.4

19.5" x 6.75" 495.3 x 171.45

19.5" x 7.5" 495.3 x 190.5

19.5" x 11.75" 495.3 x 298.45

19.5" x 12.5" 495.3 x 317.5

19.5" x 13" 495.3 x 330.2

19.5" x 14" 495.3 x 355.6

20" x 5.5" 508 x 139.7

20" x 6.5" 508 x 165.1

20" x 9" 508 x 228.6

20" x 11" 508 x 279.4

20" x 13" 508 x 330.2

20" x 14" 508 x 355.6

21" x 3" 533.4 x 76.2

22.5" x 6" 571.5 x 152.4

22.5" x 6.75" 571.5 x 171.45

22.5" x 11.75" 571.5 x 298.45

22.5" x 13" 571.5 x 330.2

22.5" x 13.5" 571.5 x 342.9

22.5" x 14" 571.5 x 355.6

22.5" x 15" 571.5 x 381.0

22.5" x 15.5" 571.5 x 393.7

30" x 3" 762 x 76.2

36" x 4" 914.4 x 101.6

Divided Rim Type



rim rim rim rim


8" x 2.5" 203.2 x 63.5

8" x 3" 203.2 x 76.2

8" x 4.5" 203.2 x 114.3

Lock Ring Type



rim rim rim rim


8" x 3" 203.2 x 76.2

8" x 4.33" 203.2 x 109.98

9" x 4" 228.6 x 101.6

9" x 6" 228.6 x 152.4

10" x 5" 254 x 127.0

10" x 5.5" 254 x 139.7

10" x 6" 254 x 152.4

10" x 6.5" 254 x 165.1

11" x 7" 279.4 x 177.8

12" x 5" 304.8 x 127.0

12" x 6" 304.8 x 152.4

12" x 8" 304.8 x 203.2

13" x 5" 330.2 x 127.0

13" x 7" 330.2 x 177.8

14" x 5" 355.6 x 127.0

14" x 6" 355.6 x 152.4

Op. 12.09.95 Dec. date 09.11.95 - TC 9511197

25 Review of Application Decision



CUSTOMS ACT 1901 - NOTIFICATION OF REQUEST FOR REVIEW OF APPLICATION DECISIONS

Requests have been received for review by Customs of decisions made on the applications for the Tariff

Concession Orders for goods described in the following TABLE.

THE TABLE

Description of Goods including the


Schedule 4 Item Number

Date of Lodgement of Request

Initial

Decision

7302.40.00 PARTS, FUNICULAR ROPEWAY RAIL TRACK, RAIL TYPE S18,

COMPLYING WITH AUSTRALIAN STANDARD 4722-2009

(AS 4722-2009), being EITHER of the following:

(a) fish plates;

(b) sole plates

Op. 11.07.12 - TC 1224724

50

14.01.13

REFUSE

7302.90.00 PARTS, FUNICULAR ROPEWAY RAIL TRACK, RAIL TYPE S18,

COMPLYING WITH AUSTRALIAN STANDARD 4722-2009

(AS 4722-2009), being ANY of the following:

(a) rail joiners;

(b) steel rail track support sections;

(c) rail clips;

(d) bed plates

Op. 11.07.12 - TC 1224728

50

14.01.13

REFUSE

26 Section 273 Determinations Made



Sec tion 273 D eter minati ons Made NOTICE OF DETERMINATIONS MADE UNDER PART XVI OF THE CUSTOMS ACT 1901

Under subsection 273B(2) of the Customs Act 1901, notice is hereby given of the making of determinations

applying to goods of a kind specified in the table below.

In the table:

(i) the first column specifies the kind of goods to which the determination applies, any conditions specified

in the determination, the commencement and cessation dates of the determination and the Determination

reference number;

(ii) the second column specifies the item in Schedule 4 to the Customs Tariff Act 1995 that applies to the

specified goods.

(iii) ‘AD’ indicates the determination was made by AusIndustry.

(iv) ‘DE’ indicates that the determination was made by Australian Customs and Border Protection Service.

Goods ancillary to an EPBS project, including office equipment, buildings, office/personnel accommodation and

goods used in activities such as land preparation, road construction and maintenance, transportation (other

than pipes, pipelines, conveyors, power transmission lines, flexible flow lines, etc integral to the project

and used to convey gas liquids, minerals, electricity or other materials or goods) and the provision of

telecommunications and other general services are excluded. Materials, consumables and construction and

servicing equipment, including all fuels, oils lubricants, adhesives, filters, protective garments, tools,

ladders (other than articles auxiliary to and designed to be permanently attached to eligible goods under

EPBS, such as pylons, supporting structures, staircases, ladders, railings, etc) paint, varnish and the like

are ineligible under EPBS, as are spare parts used for on-going maintenance beyond the commissioning of the

project.

EPBS Determinations also apply to all goods listed in the Determination when they are imported in multiple

shipments, which may be from different locations at different times.

Where a number of EPBS Determinations are issued for a particular eligible good, all associated Determinations

must not exceed the quantity of goods approved by the Delegate in the EPBS Project Eligible Goods List.

THE TABLE

Importer

Project Proponent

Project Name

Description of Goods

Dates of Effect

Exclusions

Schedule 4

Item Number

Goods, imported by QCLNG OPERATING COMPANY PTY LTD (ABN 19138872385),

for use in the QGC Pty Limited (ABN 11089642553), QGC Upstream

and Queensland Curtis LNG, as follows:

(a) Components (including commissioning spare parts) for two (2)

only Liquid Natural Gas (LNG) Processing Trains; each comprising


i. acid gas remover;

ii. dehydration and mercury remover;

iii. ethylene refrigerator;

iv. heavies remover and natural gas liquid (NGL) recoverer;

v. inlet separator and NGL recoverer;

vi. liquefaction and methane compressor;

vii. nitrogen generator, storage containers and handlers;

viii. propane refrigerator;

ix. refrigerant storage.

But specifically excluding:

x. Articles auxiliary to and designed to be permanently attached to

eligible goods under EPBS, such as pylons, support structures,

staircases, ladders, railings etc.

xi. All infill steel, pipes and racks and other auxiliary

structures such as tie-in framework, support structures,

gantries and walkways which are external to the gas purification

and liquefaction modules; and

xii. All goods entered for home consumption between 1/01/2011 and

31/12/2012 covered by AD 01003023

01/01/2013 to 31/12/2013 -AD 01003562

71

27 Section 273 Determinations Made, and

Amended Notification AAT Review of TCO Applications Results



Goods, imported by QCLNG OPERATING COMPANY PTY LTD (ABN 19138872385),

for use in the QGC Pty Limited (ABN 11089642553), QGC Upstream

and Queensland Curtis LNG, as follows:

(a) Components (including commissioning spare parts) for four(4) only

Marine Loader Arms, liquid and/or gas transfer integral to the

project.

But specifically excluding:

(i) Articles auxiliary to and designed to be permanently attached

to eligible goods under EPBS, such as pylons, support

structures, staircases, ladders, railings etc.

(ii) All infill steel, pipes and racks, and other auxiliary

structures such as tie-in framework, support structures

gantries and walkways that do not convey gas, liquids, minerals

electricity or other material or goods between the items listed

above.

(iii) All goods entered for home consumption between 01/01/2011 and

31/12/2012 covered by AD 01003024.

01/01/2013 to 31/12/2013 - AD 01003563

71

Amended notification AAT Revi ew of TCO Applicati ons Results AMENDED NOTICE OF RESULTS OF REVIEW OF A DECISION MADE UNDER PROVISIONS OF ADMINISTRATIVE APPEALS

TRIBUNAL ACT 1975

The application lodged with the Administrative Appeals Tribunal under section 29 of the Administrative Appeals

Tribunal Act 1975 for a review of the decision of the Australian Customs and Border Protection Service in

respect of the Tariff Concession Order for the goods described in the following TABLE has been resolved.


The decision of the Administrative Appeals Tribunal follows the description of goods.

THE TABLE

Description of Goods including the


Schedule 4

Item Number

8703.21.20 VEHICLES, OFF ROAD, ALL TERRAIN, four wheel drive, including ALL

of the following:

(a) maximum power-to-weight ratio exceeding 5 kW/100 kg;

(b) dry weight NOT greater than 900 kg;

(c) side-by-side seating;

(d) twin cylinder, liquid cooled, four stroke engine having a

capacity NOT greater than 1 000 cc

Op. 05.12.2011 - TC 1140436

AAT Decision: TCO APPLICATION TO BE ACCEPTED AS A VALID

APPLICATION

AAT Decision Date: 20 December 2012

50

Applicant: BRP (Australia) Pty Ltd

Documents

GAZETTE TC 13-03 Dated 23 January 2013 · PDF fileIndustrial Standard G3134 (JIS G3134) grade SPFH590 OR Japanese Industrial Standard G3113 (JIS G3113) grade SAPH440, having ALL of