GB 2 fer Offer - ehnaton.bg · 210764/E mandrel shape crimping 1 - 10 111 1 Crimping dies for end sleeves Art. no. mm2 weight PU 210765/E trapezoid crimping 6 - 16 111 1 Crimping

...convincing solutionsHAUPA GmbH & Co. KG, Königstraße 165–169, D-42853 Remscheid, Phone: +49 (02191) 8418-0. Fax: +49 (02191) 8418840, E-Mail: [email protected].

All prices are retailer net-prices plus V.A.T. valid until 31.12.2012. Errors and technical changements reserved.

Art. no. weight PU211690 566 1

www.haupa.com

Offer

valid

until

31.01

2.2012GB

Set 211692X-CrimpPlus

Crimping pliers X-CrimpCrimping pliers used to quickly change HAUPA precision pressing inserts with nylon bag.

• Reliable crimping results just like with fixed pressing inserts• Forced lock ensures standardised pressing actions• Flat construction enables you to work precisely even when space is at a premium

Crimping dies for end sleeves

Art. no. mm2 weight PU210763/E trapezoid crimping 0,5 - 4 72 1

Crimping dies for uninsulated terminals

Art. no. mm2 weight PU210764/E mandrel shape crimping 1 - 10 111 1

Crimping dies for end sleeves

Art. no. mm2 weight PU210765/E trapezoid crimping 6 - 16 111 1

Crimping dies for insulated crimp cable lugs

Art. no. mm2 weight PU210761/E oval crimping 0,5 - 6,0 53 1

Crimping pliers used to quickly changeHAUPA precision pressing inserts

Content:art. 211690

art. 210763/Eart. 210764/Eart. 210765/Eart. 210761/E

More dies HAUPA catalogue 2012 page 33.

Offer

Around the cable


Battery powered crimping tool „SO-6“Hydraulic for interchangeable dies, crimping head 180° swivelling, Headcan be opened, manual return flow after perfect pressure.

Extent of supply:1 crimping tool1 charger1 Li-Ion batterie1 strapin light plastic box

Technical data:• Pressing force in kN: 60 kN• Working pressure in bar: 700• Head can be opened• Opening/Hub: 17 mm• Pressing width: slim• Cable lugs: standard Cu 6-300• DIN Cu 6-300 • DIN Al 16-240• Connectors: Cu 6-300• DIN Cu 6-300 • DIN Al 16-240• Pressing time, battery-operated

in seconds: 5• Battery charging time in minutes:

60• Battery type: Li-ION, 14,4 V, 3 Ah

Art. no. mm2 PW weight PU216820 95 5 132 1216822 120 5 130 1216824 150 5 128 1

Crimping dies for standard tube cable lugs

Offer

valid

until

31.01

2.2012GB

Art. no. mm2 Al PW weight PU216846 95 70 5 120 1216848 120 5 120 1216850 150 95-120 5 120 1

Crimping dies forDIN tube cable lugs

Offer 216801 standard (set)

Offer 216801 DIN (set)

+

+

Offer priceArt. no. 216801/STD

Offer priceArt. no. 216801/DIN



Around the cable


Electro-hydraulic punching tool „AS-6“ with 360° rotating headIn a black plastic case and including 1 charger, 2 batteries, 1 carrystrap, without inserts.

Extent of supply: 1 hydraulic punch: 1 connecting rod 3/8-24 UNF (art. 217600), 1 connecting rod 3/4-16 UNF (art. 217602), 1 adapter (art. 217664), 1 spacer bushing (art. 217666), 1 transport case.

Advantages:• Head can be rotated by 360°• Flexible aluminium head• Automatic end switch off• Non-slip handle area• Slim and compact construction• LED to illuminate the area you are working in• NiMH technology

Punching capacity:Shaped holes 138 x 138 mm (ST37 2.5 mm)Round holes 150 150 mm (ST37 3 mm) / 63 mm (VA 2 mm)

Technical data:• Pressing force: 50 kN• Working pressure: 430 bar• Battery charge time: 60 minutes• Battery voltage: 12 V• Battery capacity: 2 Ah• Working pressure: 600 bar


Hydraulic hand-punching tool „HS-6“Punches accurate slugs nearly free of burs. Usable for building andmaintaining control boxes, for car retrofitting and for sanitary application.

Extent of supply: 1 hydraulic punching tool, 1 rod 3/8-24 UNF (art.217600), 1 rod 3/4-16 UNF (art. 217602), 1 adapter (art. 217666), 1 sleeve (art. 217664), 1 plastic case with insert.

Technical data:• Punching capacity: Steel plates up to max. 3 mm• Pressing force: 60 kN

Set 217680: 3 punching dies, metric Set 217682: 3 punching dies, PG

Art. no. Ø weight PU217612 Die metric 20,5 ISO 20 90 1217614 Die metric 25,5 ISO 25 150 1217616 Die metric 32,5 ISO 32 220 1

Art. no. Ø weight PU217634 Die PG 20,4 PG 13,5 91 1217636 Die PG 22,5 PG 16 120 1217638 Die PG 28,3 PG 21 170 1

Offer priceArt. no. 217680




Around the cable

The new HAUPA decoiler have been designed for daily intensive use.The most important characteristics of this product are the ease of operation and the light weight.

Art. no. drum/width drum-Ø drum/kg weight PU143398 330 600 50 3500 1

Decoiler 600The side elements are made from galvanised powder-coated steel. Theball bearing drums can be adjusted without the need for specialisttools. Four vibration-damping feet prevent unwanted movement of theroller and protect the floor.

Length: 350 mmWidth: 350 mmHeight: 105 mm


Decoiler 1200 +The front and the rear sides are made of anodized aluminum with anti-skid ribs. For the left and the right side, sink steel with powder coatinghas been used. Because of this construction, the decoilers are strong,flexible to use, and resistant against heavy circumstances. The roleshave bearings and a sliding axis, which make it easy to change theposition of the roles without any special tools. Four antiskid buffersensure that vibrations are subdued and floors remain intact.


Cable unwinder4 box cable unwinder

Cable unwinderLength: 400 mm, width: 400 mm, height: 390 mm

Offer

valid

until

31.01

2.2012GB


Art. no. drum/width drum/kg weight PU143404 600 50 8000 1




Decoiler 1200The front and the rear sides are made of anodized aluminum with anti-skid ribs. For the left and the right side, sink steel with powder coatinghas been used. Because of this construction, the decoilers are strong,flexible to use, and resistant against heavy circumstances. The roleshave bearings and a sliding axis, which make it easy to change theposition of the roles without any special tools. Four antiskid buffersensure that vibrations are subdued and floors remain intact.







Working under tension / Standard program

Art. no. PU220171 1

Service-Trolly for hybrid vehicleshard-side case, black, 2 tool sections, document pocket, combination lock,bottom half of case equipped with variable partitions, with high-gradefittings, 2 locks, case art. 220023.

Content:• 2C-VDE electrician‘s screwdrivers 2,5x75, 3x100, 3,5x100, 4x100 mm• 2C-VDE cross slotted screwdrivers PH 1, 2, 3• 2C-VDE cross slotted screwdrivers S-Tx 20, 25, 30• Hexagon sockets VDE 3/8" WS 8, 9, 10, 12, 13, 14, 17, 19, 22• Extension 3/8" VDE, 250 mm• Reversible ratchet VDE 3/8"• Water pump pliers VDE 240 mm• Cable cutters VDE 230 mm• Side heavy duty side cutters VDE 205 mm• Side cutters VDE 165 mm• Short flat nose pliers VDE 160 mm• Long chain nose pliers, angled nose 200 mm• Combination pliers VDE 205 mm• Cable stripping knife 1000V, straight blade, 50 mm• Safety-sets with bag, insulating mat• Slip on bushes 1000V, 12 mm• Slip on bushes 1000V, 10 mm• VDE-sockets 3/8", M8, M10, M12• Shutting band red/white 500 m• Sign „dangerous voltage“• Sign „do not switch“

Art. no. PU104020 1

Flex Bag with 50 mm S2 bits and reduced shankRatchet screwdriver with right/left hand motion. Adjustable operating angle of 180°. Safety and special bit set - top quality S2!

Content:

1/4" 50 mm Power bits Tx: T5, T61/4" 50 mm Power bits Tx-S: T7, T8, T9, T10, T15, T20, T25, T30, T401/4" 50 mm Power bits Hex (hole): H2, H2.5, H3, H4, H5, H61/4" 50 mm Power bits PH: 0, 1, 2, 31/4" 50 mm Power bits PZ: 0, 1, 2, 31/4" 50 mm Power bits flach: 3, 4, 5, 6, 7, 81/4" 50 mm Power bits Robertson: 0, 1, 2, 31/4" 50 mm Power bits Tri-Wing: 1, 2, 31/4" 50 mm Power bits PZ/FL 1 & 2Above bits are in reduced shank except T40, H6, flat: 6, 7, 8 in full hex shank2 pcs. Adapters: 1/4" 50 mm, 1/4" 80 mm8 pcs. sockets: 5, 5.5, 6, 7, 8, 10, 12, 131 pc of Flex ratcheting driver



Working under tension / Standard program



Attractive laser marking for your individual tool caseShow profile – give your tool case your name!

Logo and name in noble laser design on aluminium plate. You decide where it’s placed!

Torque wrenchesreversible ratchet system

Hollow saw set electro „QuickChange“Content:• HSS-Bi-metal hole saw set

35, 68 and 73 mm• QuickChange adapter holder• Adapter 14 - 30 mm• Adapter 32 - 210 mm

Art. no. square PU110607 1/4” 5 - 25 Nm 1110608 3/8” 21 - 119 Nm 1110609 1/2” 42 - 210 Nm 1

Art. no. PU230002 1

Art. no. PU220193 1

Offer priceArt. no. 110607 1/4”




Fibreglas section fish rods kits

Art. no. PU150560 32,50 1150562 44,70 1

Offer priceArt. no. 150560, 7 m

Offer priceArt. no. 150562, 10 m


Art. no. length rods rods rods rodstotal 8 mm 6 mm 5 mm 4 mm

150560 7 5 2150562 10 2 6 2

Art. no. hook chain magnet front bulb pull botton lamp150560 1 1 1 1 1150562 1 1 1 1 1 1

Content:

LED

HAUPA-Groupwww.haupa.com

QZERTIFIKATDIN EN ISO 9001 HAUPAdemo

Documents

GB 2 fer Offer - ehnaton.bg · 210764/E mandrel shape crimping 1 - 10 111 1 Crimping dies for end sleeves Art. no. mm2 weight PU 210765/E trapezoid crimping 6 - 16 111 1 Crimping