Embed Size (px)
Citation preview
Réf:
RO
MEO
/V1/
Aug
04
GB Instructions for use
Safety instructions . . . . . . . . . . . . . . . . . . . . . . .2Parts and controls . . . . . . . . . . . . . . . . . . . . . . . .2Important information . . . . . . . . . . . . . . . . . . . . .3Before using your appliance for the first time . . . . .3Making coffee . . . . . . . . . . . . . . . . . . . . . . . . . .4Preparing hot water . . . . . . . . . . . . . . . . . . . . . .4Heating liquids with steam . . . . . . . . . . . . . . . . . .5Preparing milk froth . . . . . . . . . . . . . . . . . . . . . .5Changing the standard settings . . . . . . . . . . . . . .6Care and daily cleaning . . . . . . . . . . . . . . . . . . .7Descaling the appliance . . . . . . . . . . . . . . . . . . .8Messages on the display . . . . . . . . . . . . . . . . . .10Optical message . . . . . . . . . . . . . . . . . . . . . . .10What to do in the event of a fault ? . . . . . . . . . .11NESPRESSO Club . . . . . . . . . . . . . . . . . . . . . .12Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .12Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Technical specifications . . . . . . . . . . . . . . . . . . .12Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
GB
32
Safety instructions
Please read the operating instructions care-fully and keep them in a safe place!
This appliance is designed for domestic andnot industrial use.
Risk of electric shock!Connect and operate the appliance only inaccordance with the specifications on therating plate.
Keep children away from the appliance.
Use the appliance inside and at room tem-perature only.
Do not use the appliance if the power cordand/or appliance are damaged. If a faultoccurs, immediately pull out the main plug.
To prevent injury, repairs to the appliance,such as replacing a damaged power cord,should be carried out by NESPRESSO Club
Do NOTl bring the power cord into contact with
hot partsl pull the power cord over sharp edgesl carry the appliance by the power cord
Do not place the appliance on or near hotsurfaces, e.g. hobs.
Never immerse the appliance or maincable in water.
Risk of injury!Do not place fingers through the door of thecapsule infeed.
The warming plate 6 becomes hot, do nottouch.
Do not switch on the appliance without cof-fee outlet 18 and capsule support 19.
Risk of scalding!The nozzle for hot water/steam 13 and theCAPPUCCINO/CAFFELATTE frothing device12 become very hot. Hold the nozzle by theplastic part only and not by the metalparts.
Never leave the appliance unattended whileit is switched on!
Parts and controlsFig. 11 Button On–/Power save2 Button - Small cup3 Button + Large cup4 Button P Steam5 Display6 Warming plate for cups7 Lid (for water tank)8 Water tank9 Hot water/steam lever (Tap display)10 Steam pipe11 Adapter12 CAPPUCCINO/CAFFELATTE
(device for frothing and heating milk)13 Nozzle (for hot water/steam)
a) Nozzle holderb) Sleevec) Nozzle tip
14 Drip tray15 Capsule container (with drip grid)16 Float
l To acknowledge English: Press button P 4.
Select a different language with buttons- 2 or + 3 and save with button P 4.
Wait and Rinsing are now indicated on dis-play 5.
The appliance heats up and is rinsed. A lit-tle water runs into the drip tray 14.
The appliance is now ready to use. Ready is indicated on display 5.
If English has already been acknowl-edged but a different language isrequired, see the chapter on «Changingstandard settings».
Water hardnessThe preset water hardness is 3.
The water hardness can be ascertainedwith the enclosed test strip or by askingyour local water supply company.
To change the water hardness, see thechapter on «Changing standard settings».
Power save modeIf the appliance is not used for one hour, itautomatically switches to power save mode.Power save is indicated on display 5.
This function can be switched on and off inStandard settings.
The warming plate 6 is not switched offin power save mode.
Automatic rinsingThe appliance is automatically rinsed when-ever it is switched on unless it is still warm.
17 Mains switch I/018 Coffee outlet19 Capsule support20 Ledge (with capsule infeed)
Important informationl Fill the water tank 8 with fresh, cold water
only and change daily.
l Place only NESPRESSO®–capsules on theledge. Other objects may damage theappliance.
l Use undamaged NESPRESSO®–capsulesonly. Deformed or torn capsules maystick in the appliance and damage it.
NESPRESSO®– capsulesUse only NESPRESSO®–capsules for thisappliance.
Order address :NESPRESSO Club, www.nespresso.com
Before using yourappliance for the first time
Switching on the appliancel Insert the mains plug.
l Set the mains switch 17 to I.
l Fill the water tank 8 with fresh, coldwater and insert into the appliance.
l Press button 1.All lamps light up.
The factory setting language and Englishlight up alternately on display 5.
54
Making coffeeTip : To ensure a successful espresso coffee,prewarm the cups on the warming plate 6or fill the cups with hot water and rinse out.
The appliance must be switched on, Readyis indicated on Display 5.
l Place a NESPRESSO®– capsule withthe membrane face down on the ledge20 (Fig. 2).
l Place a prewarmed cup under the coffeeoutlet 18.
l Press button 2 or button 3 depend-ing on the cup size. The cup is filled.The coffee outlet stops automaticallywhen the programmed amount hasrun through.
Ready is indicated again on display 5.
After use the capsule is automaticallyconveyed into the capsule container 15.
Stopping the coffee outlet earlyl Press button 2 or button 3 again.
Permanently changing theamount of liquidThe preset amount for a small or large cupcan be changed.
l Hold down button 2 or button 3until the required amount of coffee hasrun through.
The amount can be changed again atany time.
Additional amount of liquidl Press button 2 or button 3 again
within four seconds after the coffee outlethas stopped.
The same amount of water is conveyedagain by the capsule.
Making coffee or drawingwater immediately afterdrawing steamIf coffee is drawn immediately after steamhas been drawn by pressing button 2 orbutton 3, the appliance automaticallycools down beforehand. First the appliancegives off steam at intervals, then the coffeeflows out of the coffee outlet 18.
If hot water is to be drawn immediatelyafter steam has been drawn, cool down theappliance beforehand by pressing button
4, the appliance gives off steam into thedrip tray 14.
Preparing hot waterHot water can be prepared with this func-tion, e.g. for a cup of tea.
Risk of burnsThe nozzle becomes very hot, hold thenozzle by the plastic part only.
l Screw the nozzle 13 onto the adapter11 of the steam pipe 10 (Fig. 3).
l Hold a glass or a cup under the nozzle 13.
l Put the hot water/steam lever 9 in a hori-zontal position.Hot water runs out of the nozzle 13.
l To stop the hot water, put the hotwater/steam lever 9 back in the uprightposition.
Wait is indicated briefly on display 5.
Ready is indicated again on display 5.
Heating liquids with steam
Risk of scaldingSteam is very hot. It may cause the liquid tosplash.
l Screw on the nozzle 13 (Fig. 3).
l Press button 4. Steam and Wait flash alternately on dis-play 5.
As soon as Steam and Ready flash alter-nately on display 5, steam can be drawn.
l Immerse the nozzle 13 deep into the liq-uid, but do not touch the bottom of thevessel.
l Put the hot water/steam lever 9 in a hori-zontal position (Fig. 4).
l Slowly rotate the vessel.The liquid is heated.
l When the liquid is hot, put the hotwater/steam lever 9 back in the uprightposition.
Steam and Ready are indicated alternatelyon display 5.
The appliance now automatically coolsdown for approx. 1 minute. Ready is indi-cated again on display 5.
Clean the nozzle 13 as soon as it hascooled down. Dried residue is difficult toremove. See the chapter on «Care anddaily cleaning».
Preparing milk frothFrothing or heating milk
Risk of scaldingThe steam is very hot.
Handle the frothing device by the plasticpart only.
l Firmly fit together the frothing device forCAPPUCCINO/CAFFELATTE 12 (Fig.5/a). There must be no gaps.
l Connect the frothing device 12 firmly tothe adapter 11 on the steam pipe 10(fig. 5/b).
l Immerse the hose into a vessel contain-ing milk.
l Move the selector on the frothing device12 either to CAPPUCCINO (milk froth) orCAFFELATTE (hot milk).
l Place a cup or a glass under the nozzleof the frothing device 12.
l Press button 4.
l When Steam and Ready flash alternatelyon display 5, put the hot water/steamlever 9 in a horizontal position.The milkis drawn in, heated and frothed.
76
cool down the appliance. The appliancegives off steam into the drip tray 14.
l Remove the drip tray 14 and capsulecontainer 15. In this case ignore the dis-play (Fig. 6).
l Place the glass with the milk froth underthe coffee outlet.
l Insert the capsule and press button 3.
l When the coffee has run through,remove the glass and re–insert the driptray 14 and the capsule container 15.
Changing the standard settings
The standard settings can be changed.For this purpose, additional functions havebeen assigned to buttons 1, 2, button
3 and 4.
Button P = Access programming mode Button + = Selection button +Button - = Selection button –Button = Save settings
The following standard settings can bechanged:l Languagel Water hardnessl Power save model Warming plate
Programming the applianceThe appliance must be switched on.
l Hold down button P 4 for at leastthree seconds.Programming mode is activated.
l Finally, put the hot water/steam lever 9in an upright position. The appliancesteams briefly.
The appliance remains in steam mode forapprox. 1 minute. Then Ready is indicatedagain on display 5.
Tip : The milk froth and the temperature ofthe milk in the CAPPUCCINO range can bemodified by slightly rotating the selector onthe frothing device 12. The temperature inthe CAFFELATTE range can be affected byrotating the selector (Fig. 5/c).
Preferably use cold, semi–skimmed milk.
Immediately clean the frothing device forCAPPUCCINO/CAFFELATTE 12 as soonas it has cooled down. Dried residue isdifficult to remove.
See the chapter on «Care and daily clean-ing».
CappuccinoA cappuccino consists of one third espres-so, hot milk and milk froth.
l First prepare the milk froth and fill alarge cup approx. 2/3 full.
l Then place the cup under the coffee out-let and draw the espresso.
l Finally sprinkle a little cocoa powderover the cappuccino.
Latte MacchiatoLatte Macchiato is foam milk marked withespresso. It is served in a tall glass.
l First put milk froth into a suitable glassand immediately press button 4 to
l Select the required setting on display 5by pressing button P 4, e.g. Hardness// Level 3.
l To change the setting, press button - 2and button + 3, e.g. Hardness //Level 2.
l Press button 1. The changed setting issaved.
Ready is indicated again on display 5.
Changing the languageLanguage // English has been preset.
The following languages are available : Deutsch DanskFrançais NorskItaliano SvenskaNederlands SuomiEspañolPortuguês
Changing the water hardness“Water hardn.”Hardness // Level 3 has been preset.
The following settings are available :Level 1, 2, 3, 4 or –.
The – setting means that no water hardnesshas been set. The appliance no longer sig-nals automatically when the applianceshould be descaled.
Setting Degree of water hardnessGerman French
- None None
1 1-7 1-13
2 8-15 14-27
3 16-23 28-42
4 24-30 43-54
Power save modeThe power save mode can be changed fromPower save // on to Power save // off.
Warming plateThe function of warming plate 6 can bechanged from Warmplate // on toWarmplate // off.
Note : The Descaling procedure andDescaling alarm functions are requiredto descale the appliance, see chapteron «Descaling».
Care and daily cleaning
Risk of electric shock!Before cleaning the appliance, pull out themain plug.
Never immerse the appliance in water.
Do not use a steam cleaner.
l Rinse all loose parts by hand only.
l Wipe the housing with a damp cloth.Do not use scouring agents.
l Rinse out the water tank 8 with water only.
98
l Pull out the drip tray 14 and capsulecontainer 15 (Fig. 6). Clean everythingwith a mild detergent solution. When re–inserting the tray and contain-er, ensure that the parts are correctlypositioned with respect to each other.
l First pull out the coffee outlet 18 andthen the capsule support 19 (Fig. 8).
l Clean with a detergent solution and asoft brush (not dishwasher–proof).
l First re–insert the capsule support 19 andthen the coffee outlet 18 (Fig. 9).
Nozzle 13 for hot water/steaml Unscrew nozzle 13 from the steam pipe.
l Dismantle all parts (Fig. 7).
l Clean with a detergent solution. Cleanthe nozzle tip 13/c at the front with ablunt needle.
l Rinse all parts with clear water and dry.
CAPPUCCINO / CAFFELATTE
Frothing device 12The individual parts of the CAPPUCCINO/CAFFELATTE frothing device12 must always be clean. Even the smallestamount of milk residue will impair the froth-ing result.
Therefore, after using the frothing device12, always rinse immediately with water.To do this :
l Insert the hose in a vessel filled with coldwater.
l Place a second vessel under the outlet ofthe frothing device 12.
l Set the selector on the frothing device 12to CAFFELATTE.
l Press button 4
l If Steam and Ready are indicated alter-nately on display 5, put the hot water/steam lever 9 in a horizontal position.
l Rinse the frothing device 12 for approx.ten seconds.
l Put the hot water/steam lever 9 back inthe upright position.
Depending on use, the frothing device 12should be dismantled and cleaned at leastonce a week.
l Pull the frothing device 12 down off thesteam pipe 10 (Fig. 5/b).
l Dismantle the frothing device 12 (Fig. 5/a).
l Clean the individual parts carefully witha detergent solution.
l Rinse all parts with clear water and dry.
Descaling the appliance
If Needs to be descaled is indicated on dis-play 5, descale the appliance immediately.
Descale the appliance according to the fol-lowing instructions, otherwise the appliancemay be damaged.
Use only descaler which can be orderedfrom the NESPRESSO Club.
Attention!Never descale the appliance with vinegaror vinegar–based agents or other agents !
Never interrupt the descaling programme.
Never drink the liquid.
Descaling programmeThe descaling programme lasts approx. 20minutes. Display 5 indicates progress of theprogramme.
l Remove nozzle 13 or frothing device 12.
l Unscrew adapter 11.
l Hold down button 4 for three seconds.
l Select Start descaling procedure? withbutton 4.
l Select Yes with button 2 or button 3.
l Press button 4.
Display 5 : Empty container and press P.l Empty and re–insert drip tray 14 and
capsule container 15.
l Press button 4.
Display 5 : Fill agent + water and open tap.l Mix 100 ml NESPRESSO® descaling
agent with 500 ml water and pour intothe empty water tank 8.
l Place an adequately large vessel with aspout under the steam pipe 10.
l Put the hot water/steam lever 9 in a hori-zontal position.
Display 5 : Descaling in progressThe solution runs into the vessel.
Display 5 : Return descaling solution towater tank. Close tap and press P.
l Carefully siphon the solution back intothe water tank 8.
l Put the hot water/steam lever 9 in theupright position.
l Place the emptied vessel under the coffeeoutlet 18.
l Press button 4.
Display 5 : Descaling in progressThe solution first runs visibly out of the coffeeoutlet 18 into the vessel and then out of viewin the appliance and into the drip tray 14.
Display 5 : Fill water and press Pl Rinse out water tank 8 thoroughly and fill
with 1.2 litres of water.
l Place an empty vessel under the coffeeoutlet 18.
l Press button 4.
Display 5 : RinsingThe appliance is rinsed.
Display 5 : Open tapl Place an empty vessel under the steam
pipe 10.
l Put the hot water/steam lever 9 in a hori-zontal position.
Display 5 : RinsingThe appliance is rinsed until the water tank8 has emptied.
Display 5 : Close tap + empty containerl Put the hot water/steam lever 9 in the
upright position.
1110
l Empty, clean and re–insert drip tray 14and capsule container 15.
l Fill the water tank 8 with fresh water.
Display 5 : ReadyThe descaling alarm is automatically can-celled.
l Wipe the outside of the appliance with adamp cloth.
If the descaling process is terminated, thedescaling alarm is not cancelled and theappliance prompts the customer to carryout a complete rinsing procedure accordingto the instructions on the display.
If inadequate descaling solution or freshrinsing water was used, the appliancegoes back one step and the displayprompts the customer to add descalingsolution or water again.
Manually resetting the Needs tobe descaled displayIf a manual descaling procedure is run, theNeeds to be descaled display can be can-celled on display 5.
l Hold down button P 4 for three seconds.
l Select Descaling alarm reset? with button P 4.
l Select Yes with button -2 or button +3.
l Press button 1. The Needs to bedescaled display is cancelled.
ImportantThe appliance must be descaled regularly,otherwise it will be damaged.
Messages on the displayFill and Water flash alternately on display 5l The water tank 8 is empty.
Fill with frFesh water.
However, one more cup can be drawn.
Important : If the appliance signals Filland Water even though the tank is full,see the chapter on «What to do in theevent of a fault».
Empty and Capsules flash alternately ondisplay 5.l The capsule container 15 is full.
Dispose of the used NESPRESSO® cap-sules (Fig. 6).
Check and Container flash alternately ondisplay 5.l The drip tray 14 and capsule container
15 are missing. Correctly insert the driptray 14 and capsule container 15.
Power save lights up on display 5.l The appliance switches automatically to
Power save if it was not used for onehour.
Optical messageFloat 16 rises.
During the rinsing process and when coffeeis being made, a little water runs into thedrip tray 14. When the tray is full, the floatrises (Fig. 6).
l Pull the drip tray 14 forwards.
l Remove the capsule container 15.
l Empty the drip tray 14 and rinse with alittle detergent solution.
l Place the capsule container 15 on thedrip tray 14 and re–insert.
What to do in the eventof a fault?
The appliance is not functioning. l Check whether there has been a power
failure or the main plug has beenpulled out.
Hot water or steam cannot be drawn. l The nozzle 13 is blocked. Clean the noz-
zle 13 with a detergent solution and ablunt needle.
Milk froth is too little or too runny. l The CAPPUCCINO/CAFFELATTE frothing
device 12 is blocked. Clean with a milddetergent solution according to theinstructions.
l Use cold, semi–skimmed milk.
Message on the display Fill // Waterdespite full water tankl Check whether the water tank 8 is calci-
fied. If required, descale water tank 8.
l The appliance is not detecting the waterlevel. Condensation may be forming onthe tank wall, then fill up the water tank.If the water tank 8 is scratched, rotatethe tank slightly.
If the message is still displayed, pleaseorder a new tank.
Fault codes
Risk of electric shockPull out the mains plug immediately if oneof the fault codes F1 to F10 lights up.
Fault code
F1,F2,F4, F6,F7, F9
F 3
F 5
F 8
F 10
If the fault code lights up again whenthe appliance has been switched on,call the Hotline : 800-562-1465.
Remedial action
Electrical malfunction.Pull out main plug and re-insert after approx. 5 seconds.
Mechanical malfunction. Pull out mains plug and proceedas follows :A capsule may have been leftconnected near the brewingunit. Remove and empty thecapsule container 15. If no cap-sule was found, pull out themain plug. Push in the ledge 20as far as possible (Fig. 10). Thecapsule could block the ejectoror the brewing unit. If the cap-sule can be seen, carefully con-vey it with a spoon into the cap-sule container 15. When thecapsule has been removed,switch on the appliance again.
Electrical malfunction or missingcapsule support 19. Check that the capsule supporthas been inserted correctly.
12
NESPRESSO ClubIf faults cannot be rectified, callNESPRESSO Club at 800-562-1465.
AccessoriesThe following accessories are enclosed withthe appliance : Hot water/steam nozzle 13
DisposalPlease ask your dealer or inquire at yourlocal authority about current means of dis-posal.
Technical specifications
Mains voltage 220-240 V / 50 Hz
Power input 1300 W
Pressure 19 bar
Water tank 1,2 lcapacity
Dimensions 24 x 37 x 34W x H x D [cm]
Licences See rating plate
GuaranteeThe guarantee conditions for this applianceare as defined by our representative in thecountry in which it is sold. Details regard-ing these conditions can be obtained fromthe dealer from whom the appliance waspurchased.The bill of sale or receipt must be producedwhen making any claim under the terms ofthis guarantee.
