MS5001 Gas Turbine

The MS5001 is one of the industry’s most well-known gas turbines in the 26-MW class. It is a single-shaft, heavy-duty unit with exceptional reliability and availability proven in over 2,500 installations worldwide. With turbomachinery, gearbox and alternator packaged in a single lift configuration, the MS5001 is robustly designed and manufactured for a long service life with easy operation and maintenance.

The perfect mix of

&Standardizationcustomization

General Performance Data

50/60 Hz Power generation

Output 26.83 MW

Heat rate 12,687 Kj/kw (12,025 Ftu/kwh)

Pressure ratio 10.5:1

Mass flow 276.1 lb/sec (125.2 kg/sec)

Turbine speed 5,100 rpm

Exhaust temperature 901ºF (483ºC)

Model designation MS5001PA

GE Oil & Gas

CONFIGURATION NOTES

Inlet duct UP and FRONTVentilation system pressurizedVentilation take-off segregatedVentilation system also provided to gearbox/loud coupling compartmentON BASE enclosure

Altitude and max ambient temperature: Desert/dry environment:300 m @ 50°C 300 m @ 55°C1,000 m @ 47°C 1,500 m @ 45°C

Continental, cold winters, unusual snow storms:900 m @ 35°C

Site temperature (min/max):Desert and coastal environment: -5°C/50°CContinental, cold winters, unusual snow storms: -20°C/35°CSnow load: max 200 kg/m2

Wind speed: max 120 mph

CONFIGURATION NOTES

Inlet duct UP and FRONTVentiliation system pressurizedVentilation take-off segregatedVentilation system also provided to gearbox/loud coupling compartmentON BASE enclosure

Altitude and max ambient temperature:Desert/dry environment:300 m @ 50°C 300 m @ 55°C1,000 m @ 47°C 1,500 m @ 45°C

Continental, cold winters/unusual snow storms:900 m @ 35°C

Site temperature (min/max):Desert and coastal environment: -5°C/50°CContinental, cold winters/unusual snow storms: -20°C/35°CSnow load: max 200 kg/m2

Wind speed: max 120 mph

TECHNICAL OPTIONS

Material:Carbon steelAISI304AISI316L

Silencer material:AISI304AISI316L

Welding:ASME IXASME IX+DEP

Enclosure type:On base

Sound pressure level:85 dBa

Insulation:InternalExternal

Bolts and nuts:ANSI B1.1ISO std

CONFIGURATION NOTES

Site temperature:Min. ambient temperature: -20°CSnow load: max 200 kg/m2

Wind speed: max 120 mph

Welding:ASME IXASME IX+DEP

Enclosure type:On base

Sound pressure level:85 dBa

TECHNICAL OPTIONS

Exhaust plenum arrangement:VERTICALHORIZONTAL-RIGHTHORIZONTAL-LEFT

Exhaust system height:VERTICAL: 18 mHORIZONTAL-RIGHT: 15/30/45 mHORIZONTAL-LEFT: 15/30/45 m

Exhaust system material:C.S. OUTER + AISI409 INNER

Exhaust system silencer numbers:12

Exhaust system stack insulation:Internal

TECHNICAL OPTIONS

Filter house type:Pulse jetStatic multistage

Environment: Desert/dry environmentContinental, cold winters /unusual snow stormsSeaside/not foggy Tropical/very humid/not dustyDesert/coastal/heavy fogs

Inlet bleed heating:YesNo

Pre-assembly:YesNo

Pulse air from:CustomerGT axial compressor

Painting/surface treatment:SS paintedSS not painted

Material:Carbon steelAISI304LAISI316L

Bolts and nuts:ANSI B1.1ISO std

Combustion system:Standard single gasDLN-1Standard dual fuel

The MS5001 is well suited for power generation in simple and combined cycles and can be packaged in tailor-made configurations.

With a combustion system available in diffusive or DLN mode, the MS5001 can operate on the broadest range of fuel gas compositions, including dual-fuel capability.

An API standard mechanical running test is performed on every unit we produce, with optional string test (no load or full load) available on request. Filter house Inlet duct

Exhaust ductMS5001 Gas Turbine

&RuggedReliable

GE Oil & Gas

Global HeadquartersVia Felice Matteucci, 250127 Florence, ItalyT +39 055 423 211F +39 055 423 2800customer.service.center@ge.comNuovo Pignone S.p.A.Nuovo Pignone S.r.l

Americas Regional Headquarters4424 West Sam Houston Parkway NorthHouston, Texas 77041P.O. Box 2291Houston, Texas 77252-2291T +1 713 683 2400F +1 713 683 2421

For complete contact information, please refer to our website.

ge.com/oilandgas

The information contained herein is general in natureand is not intended for specific construction, installationor application purposes. GE reserves the right to makechanges in specifications or add improvements at anytime without notice or obligation.

GE, the GE Monogram, and imagination at work are registered trademarks of the General Electric Company.

©2012 General Electric CompanyAll Rights Reserved

GE_ProductStructuring_MS5001_FS_012512

GE imagination at work