Upload
primoz-stupica
View
173
Download
23
Embed Size (px)
DESCRIPTION
Technical specification
Citation preview
W
WiMAX 3.4~3.8GHz / LTE 42/43 TD-LTE Dual Mode Outdoor CPE
Product Specification Version 0.7
Gemtek Technology Co., Ltd. www.gemtek.com.tw
No.1 Jen-Ai Road, HsinChu
Industrial Park, HuKou Hsiang, HsinChu Hsien,Taiwan, R.O.C.
Revision History
Revision Date Description Author
0.1 May. 01, 2013 Documents Created Louis_Chuang
0.2 Jun. 13, 2013 Removing voice & update certification
Louis_Chuang
0.3 Jun. 15, 2013 Correct Typo Louis_Chuang
0.5 Aug. 3, 2013 Correct Typo Louis_Chuang
0.6 Oct. 14, 2013 Add B43 support Penny Chang
0.7 Oct. 17, 2013 Add VoIP Penny Chang
2
Copyright © 2005-2006 GEMTEK TECHNOLOGY CO., LTD.
This document is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of GEMTEK TECHNOLOGY CO., LTD.
Notice GEMTEK TECHNOLOGY CO., LTD. reserves the right to change specifications without prior notice.
While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. GEMTEK TECHNOLOGY CO., LTD. shall be liable only to the degree specified in the terms of sale and delivery.
The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from GEMTEK TECHNOLOGY CO., LTD..
3
Revision History ................................................................................................................................ 1 Copyright............................................................................................................................................ 2 Notice .................................................................................................................................................. 2
CONTENTS ............................................................................................................................................ 3
CHAPTER 1 – INTRODUCTION ............................................................................................................ 4
Purpose and Scope ........................................................................................................................... 4 Product Features ............................................................................................................................... 4 Definitions, Acronyms and Abbreviations ...................................................................................... 4 References ......................................................................................................................................... 4
CHAPTER 2 – HARDWARE REQUIREMENT ....................................................................................... 5
General Specification ........................................................................................................................ 5 ID design ............................................................................................................................................ 5 Unit Interface ..................................................................................................................................... 5 LED Indicators ................................................................................................................................... 6 System Architecture ......................................................................................................................... 7 Radio Specification ........................................................................................................................... 7 Antenna Pattern ................................................................................................................................. 8 Environmental Specification ............................................................................................................ 8 Regulatory Specification .................................................................................................................. 9 Reliability Specification .................................................................................................................... 9
CHAPTER 3 – SOFTWARE REQUIREMENT ....................................................................................... 9
WiMAX ................................................................................................................................................ 9 LTE ...................................................................................................................................................... 9 Networking ....................................................................................................................................... 10 VoIP * Optional Function ............................................................................................................... 10 Device Management ........................................................................................................................ 12 Security ............................................................................................................................................ 12 System/Debug Utility ...................................................................................................................... 12
CHAPTER 4 – MOUNT-KIT INSTALLATION ...................................................................................... 13
Pole Mount – 1 ................................................................................................................................. 13
APPENDIX A - SUPPLEMENTS .......................................................................................................... 13
Supplements .................................................................................................................................... 13 Installation Quick Guide ................................................................................................................. 13 Packaging ........................................................................................................................................ 13
Contents
4
Purpose and Scope The purpose of this document is to define product specification of WiMAX and TD-LTE with 802.16+3GPP release, and future release 9 compliant Indoor CPE operating at 3.4~3.6GHz band. 2.3~2.7GHz band for WiMAX and band 40+41 TD-LTE is supported in other skus. *B42 and B43 are defined in Rel 10 only. This device support B42 or B43, but other LTE functions are under Rel 9. It describes the HW and SW requirements of the following products:
Company Model Name Product Name
GEMTEK WLTXCS-1XX WiMAX 3.4~3.8GHz / LTE 42/43 TD-LTE Dual Mode Outdoor CPE
Product Features - Support 802.16e Mode - Support TDD-LTE Mode - Support 3GPP Release 9 compliant - Support 1TX/2RX with TX switched diversity - Support up to UE Category 4 PHY Rate in LTE Mode - Support 1.8V and 3.3V SIM and USIM card for LTE Mode - Supports Dynamic Host Configuration Protocol - Built-in web server for web-based configuration - Password protected access and configuration - Supports IEEE 802.3, IEEE 802.3u - Support up to 1 RJ-45 Ethernet Port - Supports Gateway mode - Supports VPN pass-through - Support Power over Ethernet
Definitions, Acronyms and Abbreviations TBD To be defined
References
Date Author Document
Chapter 1 – Introduction
5
General Specification No. Feature Description Comments
LTE BB ASIC SQN5120 Sequans Communication
LTE RF ASIC SQN3140 Sequans Communication
Flash 32MB NOR Flash
SDRAM 128MB DDR
Host CNS3140 Cavium
Ethernet LAN port One RJ-45 port 10/100 auto-sensing, auto-MDX
POTS port One RJ-11 port Support Two SIP FXS Line
LED Indicators Signal Strength / Power
Console TTL signal Inside box
Reset/Reboot button Tact switch Inside box
Power supply Input: Universal range 100~240VAC Output: 48V
Power over Ethernet
ID design
Physical Size Description
Size 260(L)x250(W)x80(H)mm
Weight 1.2Kg
Unit Interface
Chapter 2 – Hardware Requirement
Connector Description
LAN – RJ 45 The LAN port allows you to connect Modem to indoor power over Ethernet injector to support power / data / voice. In order to provide IP67 water proof feature, the cable need to be assembled with water proof RJ-45 jacket.
USIM Slot Support standard 1.8V / 3.3V USIM
Lighting Projection Screw
6
LED Indicators
LED name Location Color LED Behavior Status Indication
LED List
●●●
●●●
MAIN power ●○○
○○○
Blue ON Power On
OFF Power Off
TBD status ○●○
○○○
Yellow Steady ON TBD
Blinking TBD
OFF TBD
SIM status ○○●
○○○
Green Steady ON SIM Detected
Blinking when On-hook
PUK / PIN Code
OFF No SIM Detected
LTE Status LED : Link Status When CPE is power on, each LED indicates each link status
LTE 1 ○○○
●○○
Red Steady ON CINR < 8dB
LTE 2 ○○○
●●○
Red/ Yellow Steady ON 8dB < CINR < 15dB
LTE 3 ○○○
●●●
Red/ Yellow/
Green
Steady ON 15dB < CINR
7
System Architecture
DDRII NOR Flash 1
RJ45 PHYCavium
Power
Connector
SQN5110
+SQN3140
FLASH
TCXO/
X’tal
Voltage
Regulators
USB/
MII
PA
LNA
LNALTE ANT
T/R
Switch
LTE ModuleLTE Module
USB/
MII
Radio Specification No. Feature Capability Comments
Min Typ Max Unit
1 WiMAX Supported Bands 3400 3800 The WiMAX bands are determined by customer selection of LTE bands.
2 TD-LTE Support Bands B42 and B43 RF Frequency support 3.4GHz ~ 3.8GHz Frequency Band ;
3 WiMAX Channel Band Width
5/ 7/10 MHz
4 TD-LTE Channel Band Width
5/10/20 MHz Other BW can be supported by SW configuration
5 Output Power @ 25 oC 23+/- 2 dBm Typical 23+/- 2dBm for both LTE &
WiMAX WiMAX will be limited by different modulation
6 Transmit Power Dynamic Range @ WiMAX
63 dB
7 Transmit Power Dynamic Range @ LTE
63 dB
8 WiMAX Standard Comply with WiMAX 802.16-2005 and WiMAX RCT/PCT
All RF specification should comply with WiMAX RCT
9 LTE Standard Comply with 3GPP Release 8 and future release 9
All RF specification should comply with 3GPP Release8 36.101
10 Antenna Support Frequency
3400 3800 MHz
11 4G Antenna Gain 15 dBi
N/A
8
Antenna Pattern
* The pattern & gain are measured with enclosure.
Environmental Specification No. Feature Capability Comments
min Typ max units
1 Operating temperature -20 55 oC Performance below -20
oC may be limited by
chipset capability
2 Storage temperature -40 60 oC
3 Operating humidity 5 95 %
4 Storage humidity 5 95 %
9
Regulatory Specification No. Feature Requirement Specification Comments
1 Radio_WiMAX EN302 326 Follow CE regulatory
2 Radio_LTE (Reference Only)
EN 301 908-1 V5.2.1 & EN 301 908-13 V5.2.1
Reference only ; B42 is only defined in EN 301 908-13 V 6.1.1
3 Radio_WiFi EN 300 328 ( V1.8.1 ) Follow CE regulatory
4 Safety EN 60950-1 Follow CE regulatory
5 EMC EN 301 489-1/-4/-17/-24 ; Follow CE regulatory
Reliability Specification No. Feature Requirement Specification Comments
MTBF 300,000 @ 55 oC
WiMAX No Feature Status Comments
1 Ethernet Convergence Sub-layer with IPv4 packet
Ready with Chipset
2 Ethernet Convergence Sub-layer with IPv6 packet
Ready with Chipset
3 IP Convergence Sub-layer IPv4
Ready with Chipset
4 IP Convergence Sub-layer IPv6
N/A Follow Chipset vendor schedule
5 EAP-TLS, EAP-TTLS with MSCHAPv2
Ready with Chipset
6 QoS Service Flow: UGS, rtPS, ertPS, nrtPS
Ready with Chipset
7 Classification
IP, Port, TOS, Protocol (TCP/UDP) MAC address 802.1Q
VLAN ID 802.1p
Ready with Chipset
8 Standard
IEEE 802.16-2005
WiMAX Forum Certification Profile Compliant
Ready with Chipset
Feature/performance compliant
9 BSID filter
Ready with Chipset
10 Frequency range Scanning - Full Band - Provisioned Frequency Band
Ready
11 EAP-TLS and EAP-TTLS authentication Ready
LTE No Feature Status Comments
Chapter 3 – Software Requirement
10
1 3GPP Release and Release 9 Ready with Chipset
2 4x2 MIMO Ready with Chipset
3 UE Cat 4 Ready with Chipset
PHY Rate Ethernet WAN to LAN is limited to 100/10Mbps Wi-Fi WAN to LAN is limited to system performance
4 1TX/2RX with TX diversity Ready with Chipset
5 Full band search Ready with Chipset
6 Multiple APN Ready with Chipset
7 PLMN and Cell selection Ready with Chipset
8 SIM function (1.8V and 3.3V SIM and USIM card) Ready with Chipset
Networking No Feature Status Comments
1 IPv4 ready
2 IPv6 Under developing
Ready for IOT @ Q3’13
3 IPv4/v6 dual stack Under developing
Ready for IOT @ Q3’13
4 Bridge Mode Need more information
Pure customization feature with 802.1q / VLAN functions
5 Gateway Mode ready
6 DHCP Client in WAN ready Customized option 43
7 DHCP Server in LAN
ready For Gateway Mode, Supports 253 clients max.
8 NTP Client ready
9 DNS Relay ready For Gateway Mode
10 DDNS Client ready For Gateway Mode
11 VPN Pass-through – IPSec/PPTP/L2TP ready
12 UPNP ready
13 HTTP(s) Server ready
14 Dynamic NAT/NAPT ready For Gateway Mode
15 ALG Support (FTP/SIP/etc…) ready
16 Security tunneling Need more information
Pure customization feature
17 VPN Clients Need more information
Pure customization feature
VoIP * Optional Function No Feature Status Comments
1 Protocol SIP v2 (RFC 3261) SDP (RFC2327) RTP/RTCP(RFC1889/RFC 1890)
ready
2 Codecs G.711 G.729 a/b
ready
11
3 Echo Cancellation G.168
ready
4
Caller ID
ready
Caller ID is a feature that allows you to know who is calling you before answering the phone.
5 Call Hold
ready
6 Outgoing Caller ID block
ready
hide caller name and number
7 Anonymous Incoming Call Rejection
ready
It prevents anonymous calls from getting through
8 Call Waiting Indication (tone)
ready
9 Call Transfer - Blind
ready
10 Call Transfer - Consultive
ready
11 Call Forwarding - Unconditional (Universal)
ready
12 Call Forwarding on No Answer
ready
13 Call Forwarding on Busy
ready
14 Call Waiting
ready
15 Cancel Call Waiting
ready
15 Cancel Call Waiting
ready
15 Cancel Call Waiting
ready
15 Cancel Call Waiting
ready
15 Cancel Call Waiting
ready
16
Call Waiting Recall
ready
When user have received call waiting and then hang up, the phone will play ringing tone to indicate that there is another call on line.
17
Three-way Conference Call
ready
Can speak to two other persons at the same time, making a three-person conversation.
18
Dial Plan Support
ready
defines the pattern that an end user can dial to create a valid phone number It is an ordered set of regular expressions
19 Do Not Disturb
ready
20 Redial
ready
21 Repeat Dialing on Busy
ready
12
22
Automatic Call Return
ready
allows you to call back the number whose call you missed by simply pressing some buttons
23 G.711 fax send and receive
ready
24 T.38 fax send and receive
ready
25
MWI and VMWI
ready
When the user has new messages waiting for him, an audible or visible indication is operated on the phone.
Device Management No Feature Status Comments
1 Web Access (Remote/Local) ready
2 SNMP Agent Ready for IOT SNMP V2c agent ready with upgrade function
3 TR069 Ready for IOT
4 OMA-DM Ready for IOT
5 OTA Firmware Upgrade ready IOT with different network
Security No Feature Status Comments
1 User Name/Password configuration ready 2 L2/L3 Firewall
- Basic firewall - Port Forwarding - Port trigger - DMZ - Remote WAN Ping - Remote Web Access Control
ready
System/Debug Utility No Feature Status Comments
1 Software reset button ready
2 Configuration Wizard ready Customized, need customers to provide the configuration procedure
3 Time Zone Configuration ready 80+ Countries/Cities selection
4 LED for LTE Link Diagnostic ready Please refer to Gemtek CPE user guide on LED indicator.
5 System log ready Output system information to specified network device.
6 Dual Image - Firmware Upgrade fail protection ready Switchable
7 Firmware Verification ready Use digital signature to verify the installed firmware
8 Certificate Manager ready
9 Multilanguage Need more information
Customization feature
10 Diagnostic & Monitoring ready
13
Pole Mount – 1
Supplements Article Number Package Contents Comments
WLTXCS-1XX - 1x Assembled product - 1x Ethernet cable, 1.5M - 1x POE Injector - 1x Quick installer guide - 1x Mount-Kit (w/o tilt )
Detail Deliverables need to be defined by customer agreement
Note: Not confirmed yet
Installation Quick Guide A4 Paper
Packaging White box, model name, serial number, product name
Chapter 4 – Mount-Kit Installation
Appendix A - Supplements