General InformatIon Booklet i - Health & Safety Hubdocs.healthandsafetyhub.co.uk/...scaffolders-scheme-guide-info-booklet.pdf · l SSSTS Site Supervisor l CCNSG 2 Day Passport to

CISRS, 4th Floor, 12 Bridewell Place, London EC4V 6AP Tel: 020 7822 7400 Fax: 020 7822 7401 www.cisrs.org.uk

CONSTRUCTION INDUSTRY SCAFFOLDERS RECORD SCHEME

CAP 609Revised January 2011

General InformatIonBooklet

i

CONSTRUCTION SKILLSCERTIFICATION SCHEME

AFFILIATED

Tel: 0845 602 2418 email: [email protected] www.simian-risk.com

SAFETY + TRAINING + ACCESS CONSULTANTS

Professional scaffolding training


Full details of all our courses are available from our website

A one stoA one stoP sho shoPl Do your course

l Do your touch screen test

CSCS Health & Safety

Testing - now on siteCSCS Health & Safety

CsCstesting Centre

CSCS Health & Safety CSCS Health & Safety

3

www.simian-risk.com

l CISRS Tube and Fitting (Part 1, Part 2 & Advanced)Layher, Cuplok, Plettac, Kwikstage, Haki, Peri Up

l CISRS 2 day Product Training Layher, Cuplok, Plettac, Kwikstage, Haki, Peri Up

l CISRS 5 Day Supervisor Coursesl CISRS Scaffolding Inspection (Basic & Advanced)l SMSTS (Site Manager Safety Training Scheme)l SMSTS 2 Day Refresherl SSSTS Site Supervisorl CCNSG 2 Day Passport to Safetyl CCNSG 1 day Renewall EWPA Level 2

(Experienced Worker Practical Assessment)l Scaffold Apprentices and

Guaranteed Apprenticesl PASMA Mobile Towers & Low Levell System Scaffolding Experts

l CISRS Tube and Fitting (Part 1, Part 2 & Advanced)

Professional training courses

Simian Skill is the training division of Simian Risk Management Ltd., an occupational Health & Safety consultancy and training provider for the construction industry, specialising in access and work at height. Simian now have a track record of delivering achievers.

FreetrAining

Still available

under

Train to Gain

Certificate No. 045329Centre number 7084

Construction Industry SolutionsBusiness Support,Training & Jobssite sAFetY PLUs

FREE AND PART FUNDED TRAINING AVAILABLE NOW

T: 0115 979 4523 E: [email protected] W: www.safetyaccess.co.uk

We are one of the UK’s leading providers of scaffolding training and consultancy services. For nearly 20 years, our experienced, professional team has been meeting the needs of customers across the UK in a number of key areas:

After the highly successful launch of our Scaffolding Apprenticeships earlier this year, we are now planning our next intake of funded funded places for 16-24 year olds for 2011.2011.

PLACES AVAILABLE ON A STRICLY FIRST COME PLACES AVAILABLE ON A STRICLY FIRST COME FIRST SERVED BASIS ONLY!FIRST SERVED BASIS ONLY!

If you have a 16-24 year old already employed, or would consider employing an apprentice, please contact Sarah Cockell on 0115 979 4523 or email [email protected] for an application form.

Scaffolding Skills Training — CISRS, PASMA etc Scaffolding Apprenticeship Academy

Corporate Risk Management Consultancy Independent Scaffold Inspections

CISRS Basic and Advanced Scaffold Inspection Training

• Work at Height Safety Inspections, Auditing and Consultancy

• Management Safety Training—CISRS, SSSTS, SMSTS etc




i


AFFILIATED

CISRS General Information Booklet

Published by:

Construction Industry Scaffolder’s Record Scheme (CISRS)

First published 1978Revised 1986Revised 1988Revised 1993Revised 1996 (twice)Revised 1997Revised 2000Revised 2003Revised 2007Revised 2008Revised 2011

© Copyright CISRS 2011

NOTES

CISRS Limited is responsible for the management and administration of Construction Industry Scaffolder’s Record Scheme (CISRS).

CISRS is grateful for the advice given on the contents of this publication by the NASC, the Access & Scaffolding Industry Training Organisation (ASITO) and its members.

CISRS has made every effort to ensure that the information contained within this publication is accurate. CISRS accept no liability whatsoever in connection with this document or any part thereof.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without permission in writing from the CISRS.

Acknowledgements

CISRS would like to thank all those who allowed us to use photographs of them, their equipment or training centre. Simian-Skills Ltd, NCC.

Typeset/Printed by: Witherbys Lithoflow Printing, London

Contents Page no.Foreword 51. Scope of the Scheme 72. Scaffolding Operative Schemes 8

2.1 CISRS Scaffolder (Tube and Fittings Route)2.1.1 Trainee Scaffolder (Tube and Fitting)2.1.2 Scaffolder (Tube and Fitting)2.1.3 Advanced Scaffolder (Tube and Fitting)2.1.4 Youth Training

2.2 CISRS Scaffolder (System Scaffolding Route)2.2.1 Trainee Scaffolder (System)2.2.2 Scaffolder (System)

2.3 System Scaffold Product Training Scheme (SSPTS)2.4 Basic Access System Erector (BASE)2.5 Scaffolding Labourer Card

3. Scaffolding Management and Supervisory Training 223.1 Scaffolding Supervisor

4. Scaffold Inspection Training 244.1 Basic Scaffold Inspection4.2 Advanced Scaffold Inspection

5. Vocational Qualification 275.1 Work Based Evidence 5.2 Experienced Worker Practical Assessment (EWPA)

6. Record Cards 296.1 Applying for a new record card6.2 CSCS Health & Safety Test and Equivalents6.3 Card renewals6.4 Upgrading old CITB Cards6.5 Lost Cards6.6 Card withdrawal/cancellation6.7 Checking Record Cards6.8 Appeals Process

7. Grant Aid and Training Funding 337.1 CITB-Construction Skills Grants available 2008 (CISRS Adult)

Appendices A Training Objectives – Trainee Scaffolder (Part 1) Course 35 B Training Objectives – Scaffolder (Part 2) Course 39 C Training Objectives – Advanced Scaffolder Course 42 D Training Objectives – Trainee Scaffolder (Part 1) Course Systems Scaffolding 44 E Training Objectives – Scaffolder (Part 2) Course Systems Scaffolding 47 F Training Objectives – Systems Scaffold Product Training Scheme 50 G N/SVQ Access and Rigging Operations Units 52 H Useful Contacts 54 I CISRS Approved Providers 55 J SSPTS Recognised Systems Scaffolding Products 57

Contents

3

Safeguardyour work

The Construction and Building Industry are driving the

increase and demand for NASC members.

Numerous pro-active main contractors, clients and

local authorities are already insisting that their scaffolding

contractor must be a NASC member.

Scaffolding firms are finding it harder and harder to gain

work on sites without these credentials.

Such developments are not surprising given the strict

competence requirements under CDM 2007 for clients

and contractors to demonstrate their own competence

and be satisfied as to the competence of those engaged.

www.nasc.org.uk

For more information on finding your nearest rigorously regulated scaffolding firm, please visit our website: www.nasc.org.uk

NatioNal access aNd scaffoldiNg coNfederatioN

Maintaining High Standards in Scaffolding

nasc_CPA_advert_(148x210mm)ad.indd 1 17/12/10 16:25:40

Foreword

5

Safeguardyour work

The Construction and Building Industry are driving the

increase and demand for NASC members.

Numerous pro-active main contractors, clients and

local authorities are already insisting that their scaffolding

contractor must be a NASC member.

Scaffolding firms are finding it harder and harder to gain

work on sites without these credentials.

Such developments are not surprising given the strict

competence requirements under CDM 2007 for clients

and contractors to demonstrate their own competence

and be satisfied as to the competence of those engaged.

www.nasc.org.uk

For more information on finding your nearest rigorously regulated scaffolding firm, please visit our website: www.nasc.org.uk

NatioNal access aNd scaffoldiNg coNfederatioN

Maintaining High Standards in Scaffolding

nasc_CPA_advert_(148x210mm)ad.indd 1 17/12/10 16:25:40

Foreword

The Construction Industry Scaffolder’s Record Scheme (CISRS) has been in place for over 30 years. It is one of the oldest trade card schemes in existence. CISRS has continually strived to maintain the highest standards in scaffolding training. In the current climate of skills shortages, the CISRS has resisted the urge to dilute its scheme and has in fact sought to make it more inclusive incorporating relevant industry changes as they happen, be they legislative or through Technical/Health and Safety advancement.

The scheme was originally introduced in the late 1960’s but training began in earnest after 1979 following the development of formal Part 1, Part 2 and Advanced courses. Since then tens of thousands of scaffolders have undertaken CISRS training. In 1996 Vocational Qualifications (VQ) were developed for the Construction sector, The CISRS had an active role in developing the content of the Accessing Operations and Rigging (Construction) (QCF) qualification. Since their introduction a scaffolding operative has been required to complete both the practical training and the VQ prior to a CISRS card being issued.

CISRS was the first trade card to affiliate to the Construction Skills Certification Scheme (CSCS) in August 1999. CSCS is the industry recognised registration scheme for the whole of construction. In April 2001 CISRS introduced a card renewal programme which requires its cardholders to update their card on a regular basis (usually 5 years) after completing an up to date Health and Safety test.

In response to the introduction of the Work at Height Regulations (2005) CISRS Assessed Route of Entry for Tube and Fitting Scaffolding was finally withdrawn in June 2006. All delegates wishing to obtain a CISRS Scaffolder or Advanced card following that date would be required to meet all requisite scheme criteria including Part 1, Part 2 and Advanced courses, S/NVQ 2, 3 plus valid H&S certification.

At this time CISRS qualifications in System Scaffold were introduced to the scheme. These could be obtained through the traditional Part 1, Part 2, and VQ2 route or via short duration product courses for those who had already qualified in tube and fitting.

In 2011 CISRS will look at developing CISRS training overseas. There has always been a demand for UK standard Scaffolder Training abroad and CISRS feel that they should attempt to facilitate this need.

It is our belief that the Construction Industry Scaffolders Record Scheme will continue to build on the excellent results it has already achieved by making a significant contribution to reducing the number of accidents associated with scaffolding. CISRS are also aware that in extending the scope of the Scheme, major benefits will accrue to industry as a whole. The scheme continues to deliver training that reflects best practice and industry guidance.

January 2011

CISRS Scheme Manager

Utilities Training (Northern) Ltd Diamond Business Park, Thornes Moor Road, Wakefield West Yorkshire WF2 8PT

Tel: 01924 377379 W: www.utntraining.co.uk E: [email protected]

CISRS Courses Available CISRS Part 1: Tube and Fitting CISRS Part 2: Tube and Fitting CISRS Advanced: Tube and Fitting CISRS SSPTS: Cuplok CISRS Supervisors CISRS 1 Day Assessment / Skills Test CISRS 2 Day Assessment / Skills Test CISRS Scaffold Inspection - Basic CISRS Scaffold Inspection - Advanced Additional Courses Available Safe Working at Height Harness Inspection PASMA Mobile Tower SG4 Edge Protection Ladder Awareness & Inspection General Health & Safety Course Site Management Safety (SMSTS) Site Supervisor Safety (SSSTS) IOSH Managing Safely NEBOSH Construction Certificate NEBOSH General Certificate Abrasive Wheels Confined Spaces Asbestos Awareness Manual Handling NRSWA Street Works Signing, Lighting & Guarding Location of Underground Services Emergency First Aid (1 day)

Globally Recognised Safety Qualifications Across the UK IOSH & NEBOSH Courses Near You

www.safetyexcellence.co.uk

www.utntraining.co.uk

Section 1 – Scope of the Scheme

7

1. Scope of the Scheme

The Construction Industry Scaffolder’s Record Scheme (CISRS) continues to expand and develop operative and supervisory training . CISRS is now divided into three categories, with each category offering different courses and programmes. These categories are:

I. Scaffolding Operative Schemes II. Scaffolding Management and Supervisory Training III. Scaffold Inspector Training

The operative training schemes apply to all scaffolding operatives who are at any time required to erect, substantially alter or dismantle scaffolding. An operative who has not attained prescribed levels of training, assessment and experience in scaffolding of a given kind must not be employed on such scaffolding work unless they are under adequate supervision.

Employers must demonstrate compliance with the requirements of the Health and Safety at Work etc. Act 1974, the Work at Height Regulations 2005, the Construction (Design and Management) Regulations 2007 and other relevant statutory provisions with regard to training, competence and supervision.

Since September 1996, in addition to completing CISRS Part 1, Part 2 and Advanced practical courses it has been a mandatory requirement of the Operative Scheme for candidates to achieve the relevant National or Scottish Vocational Qualification (i.e. Level 2 NVQ/SVQ for a Scaffolder Card and Level 3 NVQ/SVQ for an Advanced Scaffolder Card).

The scheme has since been further enhanced by the inclusion of a mandatory skills test/assessment following Part 2 and Advanced training.

The aim of CISRS is to provide a range of management and supervisory training that meets the specific needs of the scaffolding industry. The first course to be introduced into the scheme was the 5 Day Scaffolding Supervisors course which is aimed at first line management of Scaffolding Contractors’ (i.e. Contracts Supervisors, Foremen and non-working Charge-Hands). It is the intention of the Scheme to align all management and supervisory training with relevant vocational qualifications in the future.

The purpose of the CISRS Labourer Card is to provide a CSCS Affiliated Card for non-scaffolders who support scaffolding operations on site. This will assist employers and clients who require a fully CSCS qualified workforce on site. It also ensures that all operatives can demonstrate a minimum level of health and safety knowledge in achieving the Construction Skills Health and Safety Test.

Training and assessment within the CISRS can only be provided by CISRS Accredited Centres with content and facilities approved and regularly audited by CISRS. The requirements of centres and the training and assessment they provide is laid down in specific scheme criteria documents and the vocational qualification standards.

The following sections provide information and an overview of the various schemes available.

Section 2 – Scaffolding Operative Schemes

8

2. Scaffolding Operative Schemes

The scaffolding operative schemes provided by CISRS Accredited Centres are the nationally recognised training and assessment schemes for Scaffolding in the UK. It is also viewed by many employers as scaffolding industry best practice overseas.

In addition to the traditional Scaffolder card scheme based predominately on tube and fitting equipment, CISRS also provides training, assessment and card schemes for Scaffolding operatives who use modular system scaffolding. These include a proprietary system scaffolding training and assessment scheme for Scaffolders, very basic training for non-scaffolders who regularly use system scaffolding equipment and a Scaffolding Labourer’s card scheme.

CISRS Scaffolder Cards are only issued to candidates who:

I. attend the relevant CISRS training course(s), II. have the required site experience in scaffolding operations; and, III. provide suitable evidence for assessment. IV. complete the relevant skills test and VQ assessment V. complete Construction Skills Health & Safety test or equivalent

The Record Cards are endorsed with the training courses and VQ qualifications achieved.

The flow chart (Figure 1) summarises the main CISRS Schemes available for Scaffolders.

2.1 CISRS Scaffolder (Tube and Fitting Route)The CISRS Scaffolder (Tube and Fitting) is the original scaffolders’ scheme. It is aimed at scaffolding operatives who require scaffolding skills and knowledge in using traditional tube and fitting scaffolding equipment. You can also find more information on Scaffolder Apprenticeships in section 2.4.

2.1.1 Trainee Scaffolder (Tube and Fitting)

Registration No: 00000000Part 1 (Tube and Fitting)

The authenticity of this card can be checked by telephoning 0870 4177 223

CSCS is a registered Certification Mark

The cardholder has met the Health and Safety Awarenessrequirements as laid out in the CSCS Scheme Booklet

Construction IndustryScaffolders Record Scheme

PHOTO

Affiliated

MR A SAMPLERegistration No: 00000000/1Expiry Date: End Jan 2009

TRAINEE SCAFFOLDER

H&STESTED

New entrants into the scheme are classed as ‘Trainee Scaffolders’ until they have satisfactorily completed all of the approved training and assessment required to be deemed a qualified ‘Scaffolder’.


9

Tube and Fitting Part 1 Training

CompleteCSkills H&S

Test

CISRS AdvancedScaffolder Training

CISRS Skills Test & Assessment (VQ3)

6 months practical experience




Tube and Fitting Part 1 Trainee

CISRS TraineeScaffolder Card

CISRS ScaffoldingLabourer Card

CISRS AdvancedScaffolder Card

New EntrantScaffolding Trainee

Existing CISRSScaffolders /

Advanced Scaffolders

Card Holders

Scaffolder Card (Tube and fitting)

Tube and Fitting System Scaffold Route(Product Specific)

Tube and Fitting Part 2 Trainingand Register for S/NVQ


System Scaffolding Part 1 Training




System Scaffolding Part 1 Trainee

Scaffolder Card (System)

2 Day SystemScaffolding

Product Training

System Scaffolding Part 2 Trainingand Register for S/NVQ


Figure 1 Overview of the CISRS Scaffolder’s Scheme


10

Once an employer or sponsor accepts an operative to be trained as a Scaffolder, they can apply for a CISRS Trainee Card, providing they have completed the Construction Skills Health and Safety Test or recognised equivalent (see section 6.2 Construction Skills Health and Safety Tests and Equivalents). The CISRS Trainee Card is then valid for 18 months from the date of issue, in which time the Trainee must gain 6 months* practical experience and attend the Part 1 training course for tube and fitting at an Accredited centre.

*An operative must have a minimum of 6 months practical on-site experience prior to attending Part 1 training.

Part 1 training courses are booked directly with an Accredited Centre. A list of Accredited Centres and contact details can be found in Appendix I. The Part 1 training for tube and fitting is held over 2 weeks (10 consecutive working days Monday to Friday).

Upon successful completion of Part 1 training, the Trainee will be issued with a CISRS Completion Certificate and an application form to have their Trainee Card endorsed with the Part 1 training for tube and fitting. The Accredited providers will notify the data management unit at Construction Skills of successful completion.

Trainees who fail to demonstrate the required levels of experience, skill and knowledge will fail the course. They will be required to attend the 2 week course again once they have gained sufficient experience if they wish to progress.

Trainee Scaffolders may now be registered for Vocational Qualification and start gathering records of work based evidence (see section 5 for further information about vocational qualifications).

2.1.2 Scaffolder (Tube and Fitting)




Registration No: 00000000Part 1 (Tube and Fitting)Part 2 (Tube and Fitting)S/NVQ Level 2


PHOTO

Affiliated


SCAFFOLDER

H&STESTED

Trainee’s must have at least 6 months practical scaffolding experience following the successful completion of the Part 1 course before they can progress to the next stage – Part 2 Scaffolder training. CISRS Accredited Centres are required to check the individual holds a valid completion certificate or an updated CISRS Trainee Card showing proof of Part 1 training before accepting a booking.


11

Trainees then attend a further 2 week Part 2 training course for tube and fitting at an Accredited Centre (10 consecutive working days Monday to Friday). Trainees do not have to use the same Accredited Centre as attended previously and may use different Accredited Centres.

Note: A Trainee who has completed a Part 1 in tube and fitting is eligible to switch to the System Scaffolding Route and complete the Part 2 System Scaffolder in a particular system scaffolding product and vice versa. If this is the case the trainee would be expected to gather work based evidence relevant to the type of Part 2 course they had attended e.g. tube and fitting or system.

Following the successfully completion of the Part 2 training for tube and fitting, trainees will be issued with a CISRS completion certificate by the Approved Centre, however they will not qualify to have their card upgraded and endorsed until the Vocational Qualification Level 2 (VQ2) and relevant skills test has been completed. The Accredited providers will notify the processing unit at Construction Skills of successful completion.

Trainees who fail to demonstrate the required levels of experience skills and knowledge will fail the course. They will be required to attend the 2 week course again once they have gained sufficient experience if they wish to progress.

New Entrant Trainees require a further 6 months site experience, gathering work based evidence, before returning to an Accredited Centre to undertake a 1 Day skills test and VQ2 Assessment. The skills test and VQ Assessment can take place at weekends.

From January 2011 successful completion of the 1 day skills test and VQ assessment is a mandatory element of the CISRS scheme. This is regardless of whether the trainee has previously achieved his VQ via another route e.g. OSAT. A CISRS card will not be issued to those who fail to successfully complete the 1 day skills test and VQ assessment. If a candidate fails the skills test, they must resit at a later date after gaining sufficient experience.

If an Adult Trainee already has the relevant experience and evidence to achieve the VQ, then the assessment date may be brought forward at the discretion of the training provider but only after seeking the agreement of the Scheme Manager. The Training Provider must keep a brief report as a record of such instances, with any supporting evidence (CV’s letters of reference etc) as this may need to be verified by a CISRS Auditor.

As an alternative to completing the VQ portfolio of work based evidence Employers/Sponsors can choose for Trainee’s to undertake the Experienced Worker Practical Assessment (EWPA) route, this would negate the need to complete the 1 day skills test for further information see section 5.2.

Trainees who cannot demonstrate the required work based evidence for VQ2 will be referred back to their Employer / Sponsor for further practical experience.


12

Upon achievement of the VQ2, and providing they have a current Construction Skills Health and Safety Test or equivalent, Trainees can now apply for the CISRS Scaffolder Card (Tube and Fitting), and may be deemed a qualified Scaffolder.

2.1.3 Advanced Scaffolder


Affiliated

MR A SAMPLE

Expiry Date: End Jan 2009H&S

TESTED

Registration No: 00000000/1

ADVANCED SCAFFOLDER




Registration No: 00000000Part 1 (Tube and Fitting)Part 2 (Tube and Fitting)S/NVQ Level 2Advanced Course (Tube and Fitting)S/NVQ Level 3

When a Scaffolder has been in possession of a CISRS Scaffolder Card (Tube and Fitting) for a minimum of 12 months they can then progress to complete the approved training and assessment for Advanced Scaffolder (Tube and Fitting) and vocational qualification level 3 (VQ3). CISRS training providers are required to check a valid Scaffolder Card has been held for the required length of time before accepting a booking.

Scaffolders attend a further 2 week Advanced Scaffolder training course at an Accredited Centre (over 10 consecutive working days Monday to Friday).

Following the successful completion of the Advanced Scaffolder training for tube and fitting, Scaffolders will be issued with a CISRS Completion certificate by the Accredited Centre, however they will not qualify to have their card upgraded and endorsed until the VQ3 has been achieved. The training providers will notify the data management unit at Construction Skills of successful completion. Trainees who fail to demonstrate the required levels of experience, skills and knowledge will fail the course. They will be required to attend the 2 week course again once they have gained sufficient experience if they wish to progress.

The operatives require a further 6 months practical experience gathering work based evidence before returning to an Accredited Centre to undertake a 2 day skills test and VQ3 Assessment.


If an Adult Trainee already has the relevant experience and evidence to achieve the VQ, then the assessment date may be brought forward at the discretion of the


13

training provider but only after seeking the agreement of the Scheme Manager. The training Provider must keep a brief report as a record of such instances, with any supporting evidence (CV’s letters of reference etc) as this may need to be verified by a CISRS Auditor

The Accredited Centre should then issue successful candidates an application form for upgrading their card to Advanced Scaffolder (Tube and Fitting) VQ3, providing they have a current Construction Skills Health and Safety Test or equivalent.

Trainees who cannot demonstrate the required work based evidence for VQ3 will be referred back to their Employer / Sponsor for further practical experience.

Currently the Advanced Scaffolder training and assessment scheme is only available via the Tube and Fitting route. CISRS Advanced training and assessment for systems scaffolders will be developed in the near future.

2.2 CISRS Scaffolder (System Scaffolding Route)The CISRS scheme for training and assessment using proprietary system scaffolding equipment was introduced in 2006. It is aimed at Scaffolders who require formal training and assessment in the skills and knowledge for the use of specific modular system scaffolding products (e.g. Cuplok). It follows the same programme as the Tube and Fitting route and vocational qualification to level 2.

Existing CISRS record card holders can attend a CISRS 2 day System Scaffolding Product Training Scheme (SSPTS) to have their card endorsed with a specific CISRS recognised product. For more information about the 2 day System Scaffolding Product Training Scheme see section 2.3.

You can also find more information on Scaffolder Apprenticeships in section 2.4.

2.2.1 Trainee Scaffolder (System)

Registration No: 00000000Part 1 (System Scaffold - Cuplok)





PHOTO

Affiliated


TRAINEE SCAFFOLDER

H&STESTED

New entrants into the scheme are classed as Trainee Scaffolders until they have satisfactorily completed the all of approved training and assessment required to be deemed a qualified System Scaffolder.

Once an employer or sponsor accepts an operative to be trained as a System Scaffolder, they can apply for a standard CISRS Trainee Card; providing they have completed the Construction Skills Health and Safety Tests or recognised equivalent


14

(see section 6.2 Construction Skills Health and Safety Tests and Equivalents). The CISRS Trainee Card is then valid for 18 months from the date of issue, in which time the Trainee must gain 6 months* practical experience using systems scaffolding and attend a Part 1 training course for system scaffolding at an Accredited centre.

*An operative must have a minimum of 6 months practical on site experience prior to attending Part 1 training.

Part 1 training courses are booked directly with an Accredited Centre. A list of Accredited Centres who may offer the various system scaffolding training courses can be found in Appendix I. The Part 1 training for a system scaffolding product is held over 2 weeks (10 consecutive working days Monday to Friday).

Upon successful completion of the Part 1 training the Trainee will be issued with a CISRS Completion Certificate and an application form to have their Trainee Card endorsed with the Part 1 training for the specific system scaffolding product they have been trained in. The training providers will notify the data management unit at Construction Skills of successful completion.

Trainees who fail to demonstrate the required levels of experience, skills and knowledge will fail the course. They will be required to attend the 2 week course again once they have gained sufficient experience if they wish to progress.

Trainee Scaffolders may now be registered for Vocational Qualification and start gathering records of work based evidence (see section 5 for further information about vocational qualifications).

2.2.2 Scaffolder (System)




Registration No: 00000000Part 1 (System Scaffold - Cuplok)Part 2 (System Scaffold - Cuplok)S/NVQ Level 2


PHOTO

Affiliated


SCAFFOLDER

H&STESTED

Trainee’s must then have at least 6 months practical scaffolding experience working following the successful completion Part 1 course before they can progress to the next stage – Part 2 System Scaffolder training. CISRS Accredited Centres are required to check the individual holds a valid completion certificate or an updated CISRS Trainee Card showing proof of Part 1 training before accepting a booking.

Trainees then attend a further 2 week Part 2 training course for a specific system scaffolding product at an Accredited Centre (over 10 consecutive working days Monday to Friday). Trainees do not have to use the same Centre as attended previously and may use different Accredited Centres.


15

Note: System Scaffolding Trainees who have completed their Part 1 System Scaffolder training have the following options to progress to the Part 2 Training:

I. Continue with the same system scaffolding product as the Part 1; or,

II. Switch to a different recognised system scaffold product; or, III. Switch to the Tube and Fitting route and enrol for a Tube and

Fitting Part 2 course.

The content of the Part 2 course and the VQ evidence will determine what the CISRS card is endorsed with e.g. Cuplok or Kwikstage.

Following the successful completion of the Part 2 system training, Trainees will be issued with a CISRS completion certificate by the Training Provider, however they will not qualify to have their card upgraded and endorsed until the Vocational Qualification Level 2 (VQ2) and relevant skills test has been completed. The training providers will notify the data management unit of Construction Skills of successful completion.

Trainees who fail to demonstrate the required levels of experience, skills and knowledge will fail the course. They will be required to attend the 2 week course again once they have gained sufficient experience if they wish to progress.

New Entrant Trainees require a further 6 months practical experience gathering work based evidence before returning to an Accredited Centre to undertake 1 Day skills test and VQ2 Assessment. The skills test and VQ Assessment can take place at weekends.


If an Adult Trainee already has the relevant experience and evidence to achieve the VQ, then the assessment date may be brought forward at the discretion of the training provider but only after seeking the agreement of the Scheme Manager. The training Provider must keep a brief report as a record of such instances, with any supporting evidence (CV’s letters of reference etc) as this may need to be verified by a CISRS Auditor.

As an alternative to completing the VQ portfolio of work based evidence Employers/Sponsors can choose for Trainee’s to undertake the Experienced Worker Practical Assessment (EWPA) route, this would negate the need to complete the 1 day skills test for further information see section 5.2.

Trainees who cannot demonstrate the required work based evidence for VQ2 will be referred back to their Employer/Sponsor for further practical experience.


16

Upon achievement of the VQ2, providing they have a current Construction Skills Health and Safety Test achieved within 2 years of the application, Trainees can now apply for the CISRS Scaffolder Card (System). The Card will be endorsed with the name of the specific product for the training and assessment undertaken and may be deemed a qualified Scaffolder for that specific product only.

For use of other recognised system scaffolding products, CISRS System Scaffolders would need to attend a 2 Day System Scaffolding Product Training Scheme (SSPTS) at an Accredited Centre.

2.3 System Scaffolding Product Training Scheme (SSPTS)




Registration No: 00000000Part 1 (Tube and Fitting)Part 2 (Tube and Fitting)System Scaffold Product Training - LayherSystem Scaffold Product Training - KwikstageS/NVQ Level 2


PHOTO

Affiliated


SCAFFOLDER

H&STESTED

This 2 day System Scaffolding Product Training Scheme was introduced along with the CISRS System Scaffolder scheme in recognition of the significant differences between the various proprietary system scaffolding products covered by CISRS. The aim of this scheme is to provide Scaffolders with skills and knowledge for safe use in accordance with the manufacturers’ instructions.

Only CISRS record card holders, who have achieved a minimum of Part 1 training (in either Tube and Fitting or System) are eligible to attend these 2 day training courses. If the operative has only completed Part 1 training they will still be classed as a Trainee. They may use the specific system they have been trained in, but only under the direct supervision of a CISRS qualified Scaffolder who also holds that system endorsement.

A list of CISRS recognised products and the Accredited Training Centres offering product specific training can be found in Appendix I.

Attendees who successfully complete the training and assessment can apply to have their CISRS record card endorsed with the name of the specific system scaffold product they have received training.

If an operative wishes to use a 2nd type or brand of a similar CISRS approved systems product e.g. Cuplok and Genlok the employer will be required to ensure all relevant product information is passed onto the operative and that the operative is aware of any differences in product capability, erection procedure, tie patterns etc.


This only applies to products/manufacturers that have submitted all relevant product information, proof of testing to European Standards, user guide, erection and dismantling sequence etc. to CISRS for product recognition.

CISRS will produce documentation that highlights the differences in the similar CISRS approved Systems Scaffolds.

2.4 Scaffolder ApprenticeshipsThe Scaffolder Apprenticeship programme is held over a minimum of 18 months at participating Accredited Centres. It includes the training route to qualify as a CISRS Scaffolder (Tube and Fitting or System) and VQ Level 2. The Apprenticeship scheme is structured to allow the trainees more time to complete the Construction Diploma (DIP 022), attend the practical training courses and complete VQ. See Figure 2.

From January 2011 successful completion of the 1 day skills test and VQ assessment will be a mandatory element of the CISRS Scaffolder Apprenticeship.


18

New Entrant Acceptedby Managing Agent

(e.g. CSkills)

Trainee Enrolled at anApproved CISRS

2 Week Foundation

4 months practicalexperience





2 Week Part 1A

2 Week Part 1B

2 Week Part 2B

2 Week Part 2A

1 Week Assessment

Part 2 Scaffolder CardKey Skills Level 1

Construuction DiplomaERR & VQ Level 2

CISRS Trainee Cardupgraded to Tube and

Fitting Part 1

Figure 2 Scaffolder Apprenticeship Programme


19

2.5 Basic Access System Erector (BASE)

H&STESTED

MR A SAMPLERegistration No: 00000000

Expires End Jan 2009

Registration No: 00000000BASE (Basic Access Systems Erector) 5 day course




The aim of this 5 day training course is to provide accredited training for non-scaffolders who erect, alter and dismantle very basic and routine scaffolding structures using specific modular system scaffolding. It is aimed at tradesman such as bricklayers or maintenance operatives who have the need to construct their own temporary access.

The course is held over 5 consecutive working days (Monday to Friday).

The aim of this scheme is to provide operatives with limited skills and knowledge for safe use in accordance with the manufacturers’ instructions within restricted conditions and environments.

BASE Card Holders are only permitted to construct basic scaffold structures up to a maximum height of 6m and must not work in an environment with a general public interface.

Upon successful completion of the training the Trainee will be issued with a BASE Completion Certificate and an application form to apply for a BASE record card for the specific system scaffolding product they have been trained in. They will be required to hold a current Construction Skills Health & Safety test or equivalent. The Accredited Centre will notify the data management unit at Construction Skills of successful completion.

Once an operative has held a BASE card for a 3 year period they could be eligible to attend a CISRS Systems Scaffold Part 2 course. This would be dependent upon having the relevant experience. The Part 2 course would need to be carried out using the same product e.g. Cuplok they had completed the BASE course in. Upon successful completion of a Part 2 Systems course, 1day Skills test and VQ assessment and CSkills H&S test they could apply for a System Scaffolders Card.


20

Please Note: A Basic Access Systems Erector is not a qualified Scaffolder and as such is prohibited from carrying out any scaffolding operations outside the limitations of their training course.

2.6 Scaffolding Labourer Card

Registration No: 00000000




LIMITED SITE SKILLS ONLYPHOTO

Affiliated

MR A SAMPLERegistration No: 00000000Expires End Jan 2009

SCAFFOLDING LABOURER

H&STESTED

LIMITED SITE SKILLS ONLY

The Scaffolding Labourer record card is available for operatives who carry out only labouring/driving duties in support of scaffolding operations. Labourers are only allowed to work at ground level or on a fully boarded and double guard railed section of a scaffold platform passing scaffolding equipment.

The purpose of this card is to show that the holder is a competent Scaffolding Labourer and has current up-to-date health and safety knowledge. If the operative is expected to erect, alter or dismantle scaffolding whilst on site they will need to hold an Advanced Scaffolder, Scaffolder or Trainee card.

There are 2 ways of obtaining this card:

I. By experience/industry accreditation. The application form lists a range of tasks you must be able to do under supervision, to get your card. Your employer should sign the form to confirm that the information given is correct.

II. By achieving S/NVQ Level 1 in Accessing and Rigging Operations.


21

CompleteCSkills H&S Test

within 2 years

prior to application

Submit applicationform verified by the

employer

Achieve VQ Level 1in Access and

Rigging Operations

Operatives wanting to apply for this card must also pass a Construction Skills Health and Safety Test. They should apply for their card within 2 years of the H&S test date or they will have to complete another test.

An operative does not have to complete the Construction Skills Health and Safety Test if they have evidence of completing one of the following recognised equivalents:

l FAS Safe Pass *l CCNSG Safety Passport l SMSTS Certificate*l SSSTS Certificate*

l NEBOSH Construction Certificate *

l BOSIET Offshore Survival Certificate

* Note: Must have been completed within 2 years of application.

Section 3 – Scaffolding Management & Supervisory Training

22

3. Scaffolding Management & Supervisory Training

To meet the demands of today’s scaffolding industry; CISRS has identified the need for management and supervisory training to provide the knowledge and management skills tailored for contract scaffolding.

3.1 Scaffolding SupervisorThe 5 day CISRS Scaffolding Supervisor training is available from CISRS Accredited Centres. It is aimed at scaffolding contractors’ first-line supervision (i.e. Contract Supervisors, Foremen and Non-Working Chargehands).

The course can be held in block over 5 consecutive days (Monday to Friday) or in modules of 1 day per week over 5 consecutive weeks. The course content is comparable to that of SMSTS

The course content includes:

Health and Safetyl Legal Overview – Health & Safety Lawl Health and Safety Managementl HSE ACOP’s and Guidance

Performance Standardsl British and European Standardsl NASC Safety and Technical Guidancel Design Engineering Appreciation

Employment Basicsl Legal Overview – Employment Lawl Recruitmentl Discipline and Grievancel Managing Absencel Managing Conflict and Resolution

Supervisory Skillsl Planning and Organisationl Materials and Logisticsl Competence and Allocating Dutiesl Effective Supervisionl Commissioning and Handoverl Statutory Scaffold Inspections and Inspection Practicesl Effective Communication

(including basic presentation skill, briefings and toolbox talks)l Meeting Skillsl Customer Relations

Section 3 – Scaffolding Management & Supervisory Training

Commercial Essentialsl NASC Commercial Guidancel Sales, Estimating and Surveyingl Contracts Awarenessl Managing Variationsl Valuations and Paymentl Payment Disputes and Remedies

Risk Assessment Project

Delegates are required to sit a written test and submit a project which contributes to the overall assessment.

Successful delegates will receive a CISRS endorsed certificate and can apply for the CISRS Supervisors Card, providing they have passed the Construction Skills Supervisory Level Health and Safety Test within the previous 2 years.

Section 4 – Scaffold Inspection Training Scheme (SITS

24

4. Scaffold Inspection Training Scheme (SITS)

In order to provide a nationally recognised training qualification CISRS developed two new scaffold inspection qualifications, Basic and Advanced Scaffold Inspection were launched in May 2010. After an initial 6 month period a review of comments from Approved Training providers and course delegates was considered and the pertinent suggestions were incorporated into the SITS scheme. Version 2 is to be launched early in 2011.

4.1 Scaffold Inspection Training Scheme (Basic)

The Basic Scaffold Inspection training will be delivered by Accredited Centres over 2 consecutive days. It will be aimed at anyone who is responsible for carrying out statutory scaffold inspections in accordance with the Work at Height Regulations 2005 and scaffolders wishing to expand their knowledge of scaffold inspection. Delegates may include employees from outside of the scaffolding industry such as Site Managers and Agents, Site Engineers, Health and Safety Professionals etc. The course will cover basic scaffolding structures and the fundamental requirements for safe and legally compliant scaffolding.

The Basic SITS course will include the following:

l Initial Practical Inspection Sessionl Relevant Legislationl Relevant Industry technical and Safety guidancel Identification of Scaffold componentsl Correct Erection procedurel Fault findingl Practical Inspection and Report Writing Assessmentl Theory test


25

The delegate will be required to successfully complete both the practical inspection and report writing assessment as well as the Theory test in order to pass the course.

4.2 Scaffold Inspection Training Scheme (Advanced)

The 2 day Advanced Scaffold Inspection training will cover both basic and more complex scaffolding structures. It will be aimed at professional Scaffold Inspectors, Scaffolding Supervision and Management and others who would be responsible for statutory scaffold inspection for more complex structures. To be eligible applicants would need to have extensive scaffolding industry experience and have previously attended the Basic Scaffold Inspection training course. CISRS Scaffolders providing they have held their card for a minimum of 2 years and Advanced card holders will be eligible to attend this course without having to initially attend the SITS (Basic) course

CISRS and NASC deem CISRS Scaffolders and Advanced Scaffolders competent to inspect scaffold structures based upon the grade of card they hold. i.e. A CISRS Scaffolder can inspect Basic Structures Independents, towers birdcages etc (this list is not exhaustive) and an CISRS Advanced Scaffolder can inspect both Basic and more complex structures Hanging Scaffolds, temporary roofs, complex design work (this list is not exhaustive).

Scaffold Inspection Refresher training will be introduced by CISRS in 2012, both CISRS Scaffolder and Advanced card holders will be required to attend the refresher, prior to renewing their CISRS cards if they wish to remain eligible to inspect scaffolds in the future.


The Advanced SITS course will include the following:

l Initial Practical Inspection Sessionl Relevant Legislationl Relevant Industry technical and Safety guidancel Identification of Scaffold componentsl Correct Erection procedurel Reading and Interpretation of Scaffold Drawingsl Fault findingl Practical Inspection and Report Writing Assessmentl Theory test

Section 5 – Vocational Qualification

27

5. Vocational Qualification

CISRS is committed to vocational qualifications (VQ). Where applicable training and assessment under the record scheme supports the achievement of National Vocational Qualifications NVQ Diploma in Accessing Operations and Rigging (Construction) (QCF) for England, Wales and Northern Ireland, or Scottish Vocational Qualifications (SVQ) in Scotland. For convenience the abbreviations NVQ and SVQ are referred to in this information booklet simply as VQ.

Trainees for Scaffolder training and assessment must be registered for VQ. This is completed through the CISRS Accredited Centres. Registration usually takes place when the Trainee attends the CISRS Part 2 course.

The VQ’s currently applicable under CISRS are:

Level 1 Accessing Operations and Rigging Labourers CardLevel 2 Accessing Operations and Rigging – Scaffolding ScaffolderLevel 3 Accessing Operations and Rigging – Scaffolding Advanced Scaffolder

Every VQ level has a number of Units that must be achieved. A summary of the VQ levels and the units required can be found in Appendix G.

The CISRS Accredited Centres are also registered VQ assessment centres.

Please note a VQ alone does not entitle an operative to a CISRS Scaffolder or Advanced Scaffolder card. The applicant must meet all of the CISRS scheme requirements which would include CISRS Part 1, 2, Level 2 VQ plus a current CSkills H&S test for a CISRS Scaffolder card and CISRS Part 1, 2, Advanced, Level 2, Level 3 VQ plus a current CSkills H&S test for an Advanced Card.


There is also a requirement for a 2 day skills test and VQ 3 assessment for those wanting to qualify as an Advanced Scaffolder. The skills test and VQ Assessment can take place on a weekend.

5.1 Work Based Evidence VQ programmes followed under CISRS are based on the philosophy of train, gain experience, gather evidence of that experience and then be assessed for competence.

Trainees are required to compile a portfolio of work based evidence for assessment against the relevant VQ level. Accredited Centres provide information and advice for Trainees in gathering work based evidence and assessing the evidence against the VQ requirements.

Section 5 – Vocational Qualification

The onus of gathering evidence and completing the portfolio is with the Trainee. Employers/Sponsors should assist and support Trainees by checking portfolios, offering encouragement and planning work to allow trainees to gain the appropriate work experience required.

Trainees are assessed against the VQ at each stage of the Scaffolder training. It is a requirement of CISRS that the majority of evidence presented must be aligned with the training carried out, for example when gathering evidence for the Tube and Fitting route the portfolio must have examples of works the Trainee has carried out in Tube and Fitting rather than Systems Scaffold.

5.2 Experienced Worker Practical Assessment (EWPA)As an alternative to completing VQ portfolios for level 2, Trainees can undertake a practical assessment and interview, at a participating Accredited Centre. This is the Experience Worker Practical Assessment (EWPA), where Trainees attend a 2 day practical assessment to prove they have the skills and knowledge to be deemed competent.

The successful completion of EWPA would negate the requirement of attendance and successful completion of the CISRS skills test and VQ assessment.

If the operative fails the EWPA they will be advised by the centre of alternative methods available for completing their VQ.

To be eligible for EWPA a Trainee must have had a minimum period of 12 months practical experience after completing their CISRS Part 2 training.

EWPA is only currently available for VQ Level 2.

5.3 On-Site Assessment and Training (OSAT)Some operatives may choose to achieve their VQ qualification via the OSAT route. Please note that this route is not offered by a lot of the CISRS Accredited Centres. Achievement of VQ via OSAT does not negate the requirement of attendance and successful completion of the CISRS skills test and VQ assessment.

Section 6 – Record Cards

29

6. Record Cards

To comply with CISRS, an employer/sponsor must be satisfied that an operative is suitably qualified by training and experience to be employed on given scaffolding operations. The level of CISRS training and assessment completed determines the grade of CISRS card issued.

The record card bears the operative’s name, unique record number and photograph. Record cards will state the category of the scaffolder (Trainee, Scaffolder or Advanced). The CISRS cards are also embossed with the CSCS logo and the Health and Safety Test Hologram. Each card will also show an expiry date.

The rear of the card will show the route by which the card holder qualified for his CISRS status. It will also show any systems scaffold endorsements he may have achieved.

A CISRS Record Card is evidence of satisfactory completion of industry approved training and assessment.

6.1 Applying for a new record cardApplication forms are available from Construction Skills Data Management Unit (DMU), CISRS Accredited Training Centres or by visiting the website www.cisrs.org.uk

Telephone CISRS: 0844 815 7223

The completed form should be returned to:

CISRSProcessing UnitPO Box 1055 Bircham Newton King’s LynnNorfolkPE31 6RH

With the form, the applicant must supply one passport-size colour photograph, copies of any relevant training certificates (including Health and Safety Test or equivalent) and payment as stated on the form.

6.2 Construction Skills Health and Safety Tests and EquivalentsPrior to renewal and issue of record cards it will be necessary to pass the Construction Skills Health and Safety Test within 2 years of an application. However some exemptions are recognised as equivalent to the test:

l 1 Day Construction Skills Health and Safety Awareness Course (Trainee Cards only)

l NEBOSH Construction Certificate l SMSTS Certificate (Site Management Safety Training Scheme) l SSSTS Certificate (Site Safety Supervisors Training Scheme)l FAS Safe Pass (Eire)


30

The exemptions must not have been completed any more than 2 years prior to the application of the card

l Current CCNSG Safety Passport (SCATS)l Current CCNSG Safety Passport Supervisor (SCATS)l Current BOSIET Offshore Survival Certification

For these exemptions to apply, a copy of the certificate must be attached to the application form.

Please note that when applying for CISRS Supervisors and Inspection cards, only the Construction Skills Supervisors Health and Safety Test, CCNSG (Supervisor), NEBOSH, SMSTS and SSSTS are acceptable.

6.3 Card renewals All existing cardholders will be required to renew their cards in line with scheme timescales. Cards are required to be renewed at the following frequencies:

l Scaffolding Labourer Card valid for 5 years.l Initial Trainee Cards are valid for 18 months within which time a trainee

must commence CISRS training and undertake a minimum of Part 1 Training course.

l Trainee Cards can be renewed for a further 18 month period if the trainee has completed a Part 1 course. They would be expected to complete their Part 2 and CISRS Skills test VQ Level 2 assessment within this second 18 month period.

l Scaffolder Cards are valid for 5 yearsl Advanced Scaffolder Cards are valid for 5 yearsl Scaffolding Supervisor Cards are valid for 5 years l Scaffold Inspection Training Scheme Basic and Advanced Cards are valid

for 5 years. If applying for a SITS card via retrospective training the initial card will be valid for 2 years only.

Card holders are required to renew cards using the standard application form; they will be required to have completed the Construction Skills Health &Safety Test (or equivalent) within 2 years of the application date.

The Construction Skills Processing Unit will issue a renewal notice to all existing card holders approximately 3 months prior to the cards expiry. Renewal notices will be sent to the last known address.

6.4 Upgrading old CITB CardsOperatives who still hold old style CITB/CISRS cards must apply for re-registration to the CISRS scheme. They must complete Construction Skills Health and Safety Test (or equivalent) prior to their new CISRS card being issued.

From 1st of January 2011 anyone wishing to upgrade an old style CITB/CISRS card will be required to make an appeal in writing to the Scheme Manager to explain why they have failed to renew their card prior to this date. They will be required to complete CISRS training, Skills test and VQ assessment in order to gain a CISRS card if their appeal is unsuccessful.


31

6.5 Lost CardsIf a record card is lost, the operative should contact the Construction Skills Processing Unit for a replacement card. Applications can be made by post using the application form or by telephone using a debit/credit card for payment. Replacement cards requested by telephone will only be posted to the recorded address. The replacement card will show the same expiry date as the original.

6.6 Card withdrawal/cancellationRecord cards remain the property of CISRS, who can cancel or withdraw the card if it becomes apparent it was issued under false pretences.

6.7 Checking Record CardsThe validity of CISRS cards can be checked by contacting the CITB-Construction Skills Processing Unit (see contact details below). You will require the CISRS registration number or their name, address, Date of Birth or NI number, to carry out a check.

By telephone: 0844 815 7223

By post: Processing Unit PO Box 1055 Bircham Newton Kings Lynn PE31 6RH

By email: [email protected]

Employers who are CITB Registered can use the Construction Skills on line web service called Phoenix Online to view an individual’s details and achievements at: www.cskills.org/phoenix/home.asp

6.8 ECITB/ECI Skills Database CardsThe ECI Skills Database (also known as the ECITB) is an entirely separate scaffolder’s registration scheme to the CISRS. No formal training or assessment was required to obtain these cards and as such they are not recognised by CISRS.

If an ECI Skills card holder wishes to obtain a CISRS card they would be required to meet the full CISRS scheme criteria (i.e. Part 1, Part 2, VQ etc), as would any experienced scaffolder who could not provide evidence of CISRS training.

6.9 Appeals ProcessWhere any grievance arises over the application of the Record Scheme rules, an appeal may be made in writing to the Scheme Manager. All supporting evidence must be enclosed/attached with the appeal.


Please send to

CISRS Scheme ManagerCISRS 4th Floor12 Bridewell PlaceLondon, EC4V 6AP

or by email [email protected]

The Scheme Manager’s decision on the outcome of the appeal will be final.

training services

freephone 0800 587 5224 or email [email protected]

Generation Training Services, providers of CISRS Generation Training Services, providers of CISRS Generation Training Services, providers of CISRS Generation Training Services, providers of CISRS Generation Training Services, providers of CISRS Generation Training Services, providers of CISRS Generation Training Services, providers of CISRS Generation Training Services, providers of CISRS accredited training courses on:accredited training courses on:accredited training courses on:accredited training courses on:accredited training courses on:accredited training courses on:accredited training courses on:

Genlok CISRS SSPTS Genlok CISRS SSPTS Genlok CISRS SSPTS Genlok CISRS SSPTS Genlok CISRS SSPTS Genlok CISRS SSPTS

CISRS BASIC Scaffolding InspectionCISRS BASIC Scaffolding InspectionCISRS BASIC Scaffolding InspectionCISRS BASIC Scaffolding InspectionCISRS BASIC Scaffolding InspectionCISRS BASIC Scaffolding InspectionCISRS BASIC Scaffolding InspectionCISRS BASIC Scaffolding Inspection

(System Scaffold Product Training Scheme)(System Scaffold Product Training Scheme)(System Scaffold Product Training Scheme)

training services

freephone 0800 587 5224 or email [email protected]

Section 7 – Grant Aid and Training Funding

33

7. Grant Aid and Training Funding

CITB-Construction Skills levy registered employers are entitled to claim grants for CISRS training and assessments schemes.

There may also be funding available for CISRS training and assessment through other sources.

For more information regarding grant and funding assistance contact:

l CITB-Construction Skills websitewww.cskills.org

l CITB-Construction Skills Company Development Advisor via your regional CITB-Construction Skills office. See the website at –www.cskills.org

l CISRS Accredited Training Centre (see Appendix I)

7.1 CITB-Construction Skills Grants available 2011 (CISRS Adult) (This grant information was correct at the time of printing).

Part 1 Trainee Attendance Grant @ £17.50 per day £175

Part 2 Scaffolder Attendance Grant @ £17.50per day £175

VQ Level 2 Achievement Grant £275

Advanced Scaffolder Attendance Grant @ £17.50 per day £175

VQ Level 3 Achievement Grant £275

Total = £1075

7.2 CITB-Construction Skills Grants available 2011 (CISRS Apprenticeship) Additional funding may be available for apprenticeship training contact CSkills or a CISRS Accredited Training Centre for further details.

Appendix A

35

Appendix A

Training Objectives – Trainee Scaffolder (Part 1) Course – Tube and Fitting

Overall Objectives

1. The 2-week Part 1 course will cover the following elements:

l Health and Safety Awareness comparable to SSSTS, including Legislation, regulations, best practice, tool box talks

l ½ Day Instruction/Training SG4l Interpretation of drawingsl Tie Methods and TG4l Independent tied scaffold (in tube and fitting and in an approved system)l Putlog scaffoldl Birdcage scaffoldl Static Tower (in tube and fitting and in an approved system)l Alterations to scaffolds (e.g. dropping lift height on independent)l 50 Question Test Paper (include intermediate test at the end of 1st week)

2. The trainee operative will be able, as a member of a team, to erect, alter and dismantle the above scaffold structures safely and in their correct sequence.

Note: Trainee Scaffolders should not be carrying out any work unless under the direct supervision of a CISRS qualified scaffolder.

A Trainee Scaffolder cannot lead or supervise a scaffolding gang in any work operations.

An operative is considered a trainee until they have completed Part 1, Part 2, CISRS Skills test, VQ Level 2 and H&S test, irrelevant of their time in the industry.

Detailed Training Objectives

Knowledge

At the end of the course, the trainee operative should have knowledge of:

1. Statutory regulations and safety requirements (including SG4) relating to the erection and dismantling of simple scaffolds.

2. The types, uses and purposes of scaffold tubes, boards and fittings in common use.

3. The methods of handling and stacking scaffold tubes, boards and fittings, and the inspection procedures.

Appendix A

36

4. The methods of founding scaffolds on three types of surface (ground, concrete and steel).

5. The correct and safe means of attaching and staggering joints, and the spacing of standards and ledgers to form scaffold frames.

6. The types, methods and spacing requirements for attaching bracing to the various scaffold structures.

7. The correct and safe means of attaching and spacing transoms to support working platforms and strengthen the scaffold structure.

8. The basic tying pattern for unsheeted scaffolds and moveable and non-moveable tie arrangements.

9. The dimensional requirements of working platforms to comply with the Work at Height Regulations 2005.

10. The statutory requirements for access including ladders, and ladder towers and stairways.

11. The methods of carrying, raising, lashing, securing, stacking and lowering pole ladders, and the methods of inspection.

12. The regulations governing inspection of scaffolds.

13. The correct and safe methods of erecting independent and putlog scaffolds with returns, towers and birdcages at three lifts high. In tube and fittings and proprietary systems where applicable

14. The types, uses and methods of inspection, and the correct and safe method of fixing and operating gin wheels.

Skill

At the end of the course, the trainee operative should be able to correctly and safely:

1. Carry out work in compliance with statutory regulations, and having regard for their own safety (particularly in relation to collective and personal fall prevention and the use of other PPE where appropriate), the safety of the workforce, and the public and future users of the scaffold.

2. Identify scaffold tubes, boards and fittings in common use.

3. Select serviceable scaffold tubes, boards and fittings for use; and stack, carry and raise scaffold materials to and on the working platform correctly and safely.

4. Prepare the base of a scaffold to prevent sinking and slipping of the standards.

Appendix A

37

5. Select, measure, set out and erect standards and ledgers within recommended tolerances.

6. Select and fit appropriate tubes and fittings to form bracing and stiffen scaffolds.

7. Support scaffold boards to form working platforms and install sufficient transoms to stiffen the scaffold structure.

8. Install tie arrangement to basic scaffolds.

9. Erect scaffolds of the correct dimensions to provide working platforms conforming to current Regulation and industry best practice..

10. Provide safe and suitable access for operatives to the working platform.

11. Inspect pole ladders for serviceability. Carry, raise, lash, secure and lower pole ladders.

12. Inspect scaffolds prior to handover.

13. Determine the material requirements for independent, putlog scaffolds with returns, towers (mobile, hoist and static), birdcage and system scaffolds up to three lifts high. Lay out materials, set out scaffolds and overcome obstacles to erect scaffolds safely.

14. Inspect gin wheels for serviceability, position and fix securely, reeve, rope, tie knots and correctly use gin wheel to haul up scaffold tubes, boards and fittings. Take down gin wheel and coil rope.

Appendix B

393939

Appendix B

Training Objectives – Scaffolder (Part 2) Course – Tube and Fitting

Overall Objectives


l ½ Day Instruction/Training SG4l Health and Safety Awareness comparable to SSSTS, including Legislation,

regulations, best practice, tool box talksl Basic Independent Tied Scaffoldl Truss-out Scaffoldl Scaffolds with prefabricated beamsl Protective fansl Pavement gantryl Loading Bay l Roof saddle scaffoldl Splay Scaffoldl Roof Edge Protectionl TG4 Tie Testing

Tool box talksl Alterations (e.g. removing standards from a structure)l 50 Question Test Paper (include intermediate test at the end of the 1st week)

2. The trainee operative will be able to interpret scaffold drawings.

3. The trainee operative will be able, as a member of a team, to erect, alter and dismantle the above scaffolds safely and in their correct sequence.

4. The ‘Scaffolder’ grade is the established trade competency for the scaffolding industry and enables scaffolders to lead or partake in the majority of scaffolding operations, as covered by this training and assessment.



An operative is considered a trainee until they have completed Part 1, Part 2, CISRS Skills Test, VQ Level 2 and H&S test irrelevant of their time in the industry.

CISRS Scaffolder 1 day Skills test and AssessmentFrom January 2011 successful completion of the 1 day skills test and VQ assessment is a mandatory element of the CISRS scheme. This is regardless of whether the trainee has previously achieved his VQ via another route e.g. OSAT. A CISRS card will not be issued to those who fail to successfully complete the 1 day skills test and VQ assessment.

Appendix B

40


Knowledge


1. The relevant British and European Standards, NASC guidance and statutory regulations applicable to the correct and safe erection and dismantling of scaffolds listed in the overall objectives.

2. The types, uses and methods of inspection, and the purpose of various scaffold tubes, boards and fittings in common use.

3. The types, uses and purposes of prefabricated beams, and the rules for their assembly and connection to scaffold frames.

4. The purpose, types, uses and loadings of protection fans. The methods of supporting fans by scaffold tubes and wire ropes.

5. Local Authority rules for the erection of scaffolds on pavements and public places to ensure protection of the public.

6. The correct methods of attaching spurs, rakers, check fittings, droppers and puncheons to scaffolds.

7. The methods of attaching anchor bolts and specialist fixings to provide ties for scaffolds and testing in accordance with NASC Guidance TG4.

8. How to calculate the number of ties and the spacing required to restrain sheeted and unsheeted scaffolds depending on the capacity of the tie arrangements.

9. How to interpret design layout drawings and determine the correct and safe methods of erecting and dismantling the scaffolds listed in paragraph 1 of the overall objectives.

10. How to organise men and materials to lead a gang of Scaffolders carrying out Scaffolding operations

Skill


1. Make adequate provision for the safety of themselves, the workforce, the public affected by scaffolding work, and future users of the scaffold structure by working to the relevant British and European Standards, NASC guidance and statutory regulations.

2. Select serviceable scaffold tubes, boards and fittings. Use them correctly and safely.

Appendix B

41

3. Select, inspect assemble and install prefabricated beams into and onto scaffold structures.

4. Support scaffold protection fans according to requirements of current industry practice.

5. Erect scaffolds on pavements and public places safely and correctly, with regard to Local Authority regulations.

6. Install spurs and rakers within the correct operating angles. Attach check fittings, droppers and puncheons in the correct positions to scaffolds.

7. Install anchor ties and other specialist fixings to the manufacturer’s recommendations. Testing and reporting in accordance with TG4.

8. Select, space and install the correct amount of ties to restrain sheeted and unsheeted scaffolds in unexposed areas, to current industry practices.

9. Determine the materials required to set out, erect and dismantle in a safe sequence the scaffolds listed in paragraph 1 of the overall objectives.

10. Have the skills to lead a Scaffold gang carrying out Scaffolding Operations.

Appendix ?

42

Appendix C

42

Appendix C

Advanced Scaffolder Course – Tube and Fitting

Overall Objectives

1. The 2 week advanced course will cover the following elements:


regulations, best practice, tool box talks etcl Tubular drop scaffold from steelworkl Cantilever drop scaffoldl Two-way shore/dead shorel Temporary roof scaffoldl Stairwaysl Rampsl Risk Assessmentl Method Statementsl Testing of Ties

Tool Box Talksl 50 Question Test Paper (include intermediate test at the end of the 1st week

2. Upon qualification at Advanced Scaffolder level the operative will be able to interpret complex design drawings.

3. The operative will be able, as a member of a team, to erect, alter and dismantle the above scaffolds safely and in their correct sequence.

4. The operative will be suitably qualified to lead operations as a charge hand in a scaffold gang carrying out all types (Basic and Advanced) of scaffolding works.

Advanced Scaffolder CISRS 2 Day Skills Test and AssessmentFrom January 2011 successful completion of the 2 day skills test and VQ assessment is a mandatory element of the CISRS scheme. This is regardless of whether the operative has previously achieved his VQ via another route e.g. OSAT. A CISRS card will not be issued to those who fail to successfully complete the 2 day skills test and VQ assessment.

Training Objectives

Knowledge

At the end of the course, the operative should have knowledge of:

1. The relevant British Standards, Codes of Practice and statutory regulations applicable to the correct and safe erection and dismantling of scaffolds.

2. The correct and safe method of erecting and dismantling drop scaffolding off steelwork.

Appendix C

43

3. The correct and safe method for the erection and dismantling of cantilever drop scaffolds. Including overturning moments, safety factors, counterbalance etc.

4. The correct and safe method for the erection and dismantling of dead shores.

5. The safe and correct method of erecting and dismantling Temporary Roof Scaffolds

6. The safe and correct method of erecting and dismantling staircases and ramps

7. How to interpret scaffolding drawings and specifications for the structures listed in paragraph 1 of the overall objectives.

8. How to organise men and materials to lead a gang of Scaffolders carrying out Advanced

Scaffolding operations

Skill

At the end of the course, the operative should be able to correctly and safely:

1. Make provisions for the safety of themselves, the workforce, the public affected by scaffolding work, and future users of the scaffold structure by working to the relevant British Standards, Codes of Practice and statutory regulations.

2. Determine the materials required for drop scaffolding off steelwork. Lay out materials. Set out and erect drop scaffolding off steelwork. Dismantle a tubular hanging scaffold.

3. Erect cantilever scaffolds applying appropriate weights with due regard to the safety measures required to prevent overturning.

4. Determine the materials required for dead shores. Lay out materials. Provide a means of access. Set out and erect dead shores. Dismantle shores and, where applicable, the means of access.

5. Determine the material requirements for Temporary Roof Scaffolds in accordance with drawings and specifications. Lay out materials. Set out and erect Temp Roof Scaffolds including levelling to reasonable tolerances. Dismantle Temp. Roof Scaffolds

6. Determine the material requirements for staircases and ramps in accordance with drawings and specifications. Lay out materials. Set out and erect Staircase/ramp. Dismantle Staircase/Ramp

7. Read scaffold drawings and erect scaffolds from those drawings and specifications as listed in paragraph 1 of the overall objectives.

8. Have the skills to lead a Scaffold gang carrying out Advanced Scaffolding Operations.

Appendix D

44

Appendix D

Training Objectives – Trainee Scaffolder (Part 1) Course – System Scaffolding

Overall Objectives



regulations, best practice, tool box talks etcl Manufacturers Instructionsl Interpretation of drawingsl Tie Methods and TG4l Independent tied scaffoldl Birdcage scaffoldl Static Towerl Stairwayl Alterations to scaffolds (e.g. dropping lift height on independent)l 50 Question Test Paper (include intermediate test at the end of 1st week)

2. The trainee operative will be able, as a member of a team, to erect, alter and dismantle the above scaffold structures safely and in their correct sequence.



An operative is considered a trainee until they have completed Part 1, Part 2, CISRS Skills Test, VQ Level 2 and H&S test irrelevant of their time in the industry.


Knowledge


1. Statutory regulations, manufacturers instructions and safety requirements (including SG4) relating to the erection and dismantling of simple scaffolds.

2. The types, uses and purposes of components specified by the original manufacturer.

3. The methods of handling and stacking system scaffold components, and the inspection procedures.

Appendix D

45

4. The methods of founding scaffolds on three types of surface (ground, concrete and steel).

5. The correct and safe means of setting out and connecting, standards, ledgers and transom in accordance with the manufacturers recommended sequence of erection.

6. The types, methods and frequency requirements for attaching bracing to the various scaffold structures in accordance with the manufacturers instructions.

7. The correct and safe means of supporting decking/boarding to working platforms and strengthen the scaffold structure in accordance with the manufacturer’s instructions.

8. The basic tying pattern for unsheeted scaffolds and moveable and non-moveable tie arrangements.

9. The dimensional requirements of working platforms to comply with the Work at Height Regulations 2005.

10. The statutory requirements for prescribed methods of access including ladders, and ladder towers and proprietary stairways.

11. The methods of carrying, raising, lashing, securing, stacking and lowering pole ladders, and the methods of inspection.

12. The regulations governing inspection of scaffolds.

13. The correct and safe methods of erecting independent with returns, towers and birdcages at three lifts high.

14. The correct and safe methods of erecting a basic independent scaffold and adaptions of system scaffolds.

15. The types, uses and methods of inspection, and the correct and safe method of fixing and operating gin wheels.

Skill


1. Carry out work in compliance with statutory regulations, and having regard for their own safety (particularly in relation to collective and personal fall prevention and other PPE where appropriate), the safety of the workforce, and the public and future users of the scaffold.

2. Identify components and their use in accordance with the manufacturer’s recommendations.

Appendix D

46

3. Select serviceable components for use; and stack, carry and raise scaffold materials to and on the working platform correctly and safely.

4. Prepare the base of a scaffold to prevent sinking and slipping of the standards.

5. Select, measure, set out and erect base in accordance with the manufacturers recommended sequence of erection.

6. Select and fit appropriate components to form bracing and stiffen scaffolds.

7. Construct and Board/deck working platforms in accordance with the manufacturer’s instructions.

8. Install tie arrangement to basic scaffolds.

9. Erect scaffolds of the correct dimensions to provide working platforms conforming to the Regulations and the manufacturers instructions.

10. Provide safe and suitable access for operatives to the working platform

11. Inspect pole ladders for serviceability. Carry, raise, lash, secure and lower pole ladders.

12. Inspect scaffolds prior to handover.

13. Determine the material requirements for independent with returns, towers (mobile, hoist and static), birdcage and system scaffolds up to three lifts high. Lay out materials, set out scaffolds and overcome obstacles to erect scaffolds safely.

14. Use tubes, fittings and boards to adapt proprietary system scaffold structures.

15. Inspect gin wheels for serviceability, position and fix securely, reeve, rope, tie knots and correctly use gin wheel to haul up scaffold tubes, boards and fittings. Take down gin wheel and coil rope.

Appendix E

47

Appendix E

Scaffolder (Part 2) Course – System Scaffolding

Overall Objectives



regulations, best practice, tool box talks etcl Manufacturers Instructionsl Basic Independent Tied Scaffoldl Truss-out Scaffoldl Scaffolds with prefabricated beamsl Protective fansl Pavement gantryl Loading Bay l Roof saddle scaffold (in tube & fitting if not applicable to the system)l Splay Scaffoldl Roof Edge Protectionl TG4 Tie Testingl Alterations (e.g. removing standards from a structure)l 50 Question Test Paper (include intermediate test at the end of the 1st week)

2. The trainee operative will be able to interpret scaffold drawings.

3. The trainee operative will be able, as a member of a team, to erect, alter and dismantle the above scaffolds safely and in their correct sequence.

4. The ‘Scaffolder’ grade and VQ2 assessment is the established trade competency for the scaffolding industry and enables scaffolders to lead or partake in the majority of scaffolding operations, as covered by this training and assessment.



An operative is considered a trainee until they have completed Part 1, Part 2, CISRS Skills test, VQ Level 2 and H&S test irrelevant of their time in the industry.

CISRS Scaffolder 1 day Skills test and AssessmentFrom January 2011 successful completion of the 1 day skills test and VQ assessment is a mandatory element of the CISRS scheme. This is regardless of whether the operative has previously achieved his VQ via another route e.g. OSAT. A CISRS card will not be issued to those who fail to successfully complete the 1 day skills test and VQ assessment.

Appendix E

48


Knowledge


1. The relevant British and European Standards, Manufacturers Instructions, NASC guidance and statutory regulations applic-able to the correct and safe erection and dismantling of scaffolds listed in the overall objectives.

2. The types, uses and methods of inspection, and the purpose of various scaffold tubes, and proprietary components used.

3. The types, uses and purposes of pre-fabricated beams, and the rules for their assembly and connection to scaffold frames. Also alternative methods for creating openings specified by the manufacturer e.g. using braces.

4. The purpose, types, uses and loadings of protection fans. The methods of supporting fans, as per manufacturer’s recommendations and by traditional means using scaffold tubes and wire ropes.

5. Local Authority rules for the erection of scaffolds on pavements and public places to ensure protection of the public.

6. The correct methods of attaching spurs, rakers, check fittings (if necessary), droppers and puncheons to scaffolds.

7. The methods of attaching anchor bolts and specialist fixings to provide ties for scaffolds and testing in accordance with NASC Guidance TG4.

8. How to calculate the number of ties and the spacing required to restrain sheeted and unsheeted scaffolds depending on the capacity of the tie arrangements and in accordance with the manufacturers’ recommendations.

9. How to interpret design layout drawings and determine the correct and safe methods of erecting and dismantling the scaffolds listed in paragraph 1 of the overall objectives.

10. How to organise men and materials to lead a gang of Scaffolders carrying out Scaffolding operations

Skill


1. Make adequate provision for the safety of themselves, the workforce, the public affected by scaffolding work, and future users of the scaffold structure by working to the relevant British and European Standards, Manufacturers’ Instructions NASC guidance and statutory regulations.

Appendix E

49

2. Select serviceable components. Use them correctly and safely.

3. Select, inspect assemble and install prefabricated beams into and onto scaffold structures.

4. Support scaffold protection fans according to requirements of the manufacturer and current industry practice

5. Erect scaffolds on pavements and public places safely and correctly, with regard to Local Authority regulations.

6. Install spurs and rakers within the correct operating angles. Attach check fittings, droppers and puncheons in the correct positions to scaffolds.

7. Install anchor ties and other specialist fixings to the manufacturer’s recommendations. Testing and reporting in accordance with TG4.

8. Select, space and install the correct amount of ties to restrain sheeted and unsheeted scaffolds in unexposed areas, to current industry practices.

9. Determine the materials required to set out, erect and dismantle in a safe sequence the scaffolds listed in paragraph 1 of the overall objectives

10. Have the skills to lead a Scaffold gang carrying out Scaffolding Operations.

Appendix F

50

Appendix F

Training Objectives – System Scaffold Product Training Scheme

Overall Objectives

1. The 2 Day Product Training covers the follow:

l Introduction, welcome and registrationl Basic Product Information and Manufacturers Instructionsl Legal Overview – Health and Safetyl British & European Standardsl Overview of Product Accreditation and Testing Schemes (e.g. BSI Kite mark)l Guidance and Industry Standardsl Component Rangel Basic system(s) of workl Bracing Requirementsl Ties, Stability and Tie Patternsl Loading & Dutiesl Access Towers – Theory & Practicall Independent Tied Scaffolds (including returns and hop-ups) – Theory & Practicall Birdcage Access Scaffolds – Theory & Practicall Loading Towers – Theory & Practicall Methods of Access and Egress (including stairways) – Theory & Practicall Test Paperl Summary, Course Evaluation & Close

2. The trainee will be able to use the specific system scaffold product in accordance with the requirements of the work at Height Regulations 2005, the manufactures instructions and industry standards, including NASC Guidance Notes.

Note: This training is only available to existing CISRS Record Card Holders who have attended a minimum of a Part 1 Training course. If the operative has only completed Part 1 training they will still be classed as a Trainee. They may use the specific system they have been trained in, but only under the direct supervision of a CISRS qualified Scaffolder who also holds that system endorsement.

If an operative wishes to use a 2nd type or brand of a similar CISRS approved systems product e.g. Cuplok and Genlok the employer will be required to ensure all relevant product information is passed onto the operative and that the operative is aware of any differences in product capability, erection procedure, tie patterns etc.

This only applies to products/manufacturers that have submitted all relevant product information, proof of testing to European Standards, user guide, erection and dismantling sequence etc. to CISRS for product recognition.

CISRS will produce documentation that highlights the differences in the similar CISRS approved Systems Scaffolds.

...our training packages will help you make the most of your investment. Safely and profitably.

Whichever Layher scaffolding, access or protection system you use...

EQUIPMENT

DESIGN

SUPPORT

EXPERIENCE

VERSATILITY

EXPERTISE

Layher Limited, Works Road, Letchworth, Herts. SG6 1WLTel. 01462 475100 Fax. 01462 475101

Layher Limited, Letham Road, Houstoun Industrial Estate, Livingston, West Lothian EH54 5BYTel. 01506 440220 Fax. 01506 440110

[email protected] www.layher.co.uk

3846 Layher Ad CAP 609 SD.indd 1 09/12/2010 20:22

Appendix G

52

Appendix G

NVQ Diploma in Accessing Operations and Rigging (Construction) (QCF) LEVEL 2

Mandatory Core Units

F/600/7138 Conforming to general safety in the workplaceJ/600/7139 Conforming to efficient working practices in the workplaceJ/600/7142 Moving and handling resources in the workplace

Mandatory Units

D/600/8264 Erecting and dismantling independent and birdcage scaffolds in the workplace

T/600/8271 Erecting and dismantling mobile and static scaffold towers in the workplace

R/600/8276 Erecting and dismantling cantilever scaffolds in the workplaceM/600/8298 Erecting and dismantling pavement or roof scaffolds in the

workplace M/600/8303 Utilise provision of fall protection systems and/or equipment in

the workplace

NVQ Diploma in Accessing Operations and Rigging (Construction) (QCF) LEVEL 3

Mandatory Core Units

F/600/7138 Conforming to general safety in the workplaceY/600/7078 Confirming work activities and resources for an Occupational

Work area in the workplaceD/600/7079 Developing and maintaining good occupational working

relationships in the workplaceR/600/7080 Confirming the occupational method of work in the workplaceM/600/8303 Utilise provision of fall protection systems and/or equipment in

the workplaceL/600/8261 Erecting specialised designed scaffolds and rigging in the

workplace

And two of the following:

H/600/8265 Erecting and dismantling overhead scaffolds in the workplace K/600/8266 Erecting and dismantling falsework scaffolds in the workplaceT/600/8268 Erecting and dismantling shoring scaffolds in the workplaceA/600/8272 Erecting and dismantling temporary roof scaffolds in the

workplace

Appendix G

Notes Since 1st January 2008 all candidates attending Part 2 and Advanced courses have been required to register and complete the relevant VQ prior to a card being issued. The previous exemption to completing VQ if training had commenced prior to the VQ’s inception 1996 no longer applies.

Although SVQ unit numbers differ from England, Wales and Northern Ireland, the unit content is the same.

Appendix H

54

Appendix H – Useful Contacts

CISRS Scheme ManagerCISRS4th Floor 12 Bridewell PlaceLondonEC4V 6AP

Construction Industry Scaffolders Record Scheme (CISRS)Processing UnitPO Box 1055Bircham NewtonKing’s LynnNorfolkPE31 5XQ

CISRS Scaffolding Helpline Tel. 0844 815 [email protected]

To book a Construction Skills Health and Safety Testgo to www.cskills.org alternatively Tel. 0344 994 4488

Appendix I

55

Appendix I – CISRS Accredited Training Providers

Arrow Training Ltd Unit 6-7ARiverdale Business ParkWheatley Hall RoadDoncaster DN2 4PF Tel: 01302 367 877 www.arrowuk.com

Beckton Training CentreLondon Industrial Estate10 Whiting WayBecktonLondon E6 6LRTel: 0207 4745346www.benchmarkscaffolding.com

CITB Northern Ireland 17 Dundrod RoadCrumlinCo. AntrimNorthern IrelandBT29 4SR Tel: 02890 825 466www.citbni.org.uk

Eastern Counties Access SolutionsWork at Height CentreMuck LaneRackheathNorwichNorfolk NR13 6STTel: 01603 735130www.ecaccesssolutions.com

Generation Training ServicesUnit 8Green Industrial ParkCalder Vale RoadWakefield WF1 5PHTel: 0800 587 5224www.generationhireandsales.co.uk

Haki LtdMagnusTame Valley Industrial EstateTamworth B77 5BYTel: 01827 282525www.haki.co.uk

HarscoKnapps LaneFishponds Ind. EstateFishpondsBristolBS5 7UQTel. 01827 266109www.harsco-i.co.uk

Lawsons Training Centre LimitedWhinbank FarmDistingtonWorkingtonCumbria CA14 4QH Tel: 01946 833313 www.lawsonstraining.moonfruit.com

Layher LtdWorks RoadLetchworthHertfordshire SG6 1WLTel: 01462 475100www.lahyer.co.uk

LTC Training ServicesWixenford DepotColesdown HillPlymouth PL9 8AATel: 01752 485303www.ltcaccees.co.uk

The Manchester CollegeAshton Old RoadOpenshawManchester M11 2WH Tel: 0800 1957700www.themanchestercollege.ac.uk

National Construction College East Bircham NewtonKing’s LynnNorfolk PE31 6RH Tel: 01485 577 724www.nationalconstructioncollege.co.uk

Appendix I

56

National Construction College Midlands 83 Lifford LaneKing’s NortonBirmingham B30 3JH Tel: 0121 459 4262www.nationalconstructioncollege.co.uk

National Construction College Scotland 4 Fountains WayInchinnan Business ParkInchinnanRenfrewshire PA4 9RQ Tel: 0344 994800 www.nationalconstructioncollege.co.uk

National Construction College South Manor RoadErith Kent DA8 2AD Tel: 01322 349638www.nationalconstructioncollege.co.uk

NETA Training Group Pennine AvenueNorth Tees Industrial EstateStockton-on-TeesCleveland TS18 2RJ Tel: 01642 616 936www.neta.co.uk

Newcastle CollegeRye Hill CampusScotswood RoadNewcastle upon TyneNE4 7SA Tel: 0191 200 4533 www.ncl-ac.uk

Safety and Access Limited Dabell AvenueBlenheim Industrial EstateBulwellNottingham NG6 8WA Tel: 0115 979 4523 www.safetyaccess.co.uk

Simian Skills LtdWallis HouseBirchwood ParkWarrington WA3 6FWTel: 0845 602 2418www.simian-risk.com

Training 2000 LtdFurthergate Industrial ParkHarwood StreetBlackburnLancashire BB1 3BD Tel: 01254 586535 www.training2000.co.uk

Utilities Training (Northern) Ltd Diamond Business ParkThornes Moor RoadWakefield WF2 8PT Tel: 01924 377 379 www.utntraining.co.uk

WCTS Ltd. Unit 7 Curran Road Ind. EstateCardiff CF10 5DFTel. 01656 331261www.wctslimited.co.uk

Note: CAPE East operates an Accredited CISRS overseas Centre in the Philippines.

This list of CISRS Accredited Training Providers is current at the time of printing.

Some centres do not operate the full range of CISRS courses, please consult the website www.cisrs.org.uk or contact the centre directly to confirm which courses are offered.

Contact centres directly in order to book a course.

Appendix J

57

Appendix J – List of CISRS Recognised System Scaffolding Products

Product Name Manufacturer

Genlok Generation (UK) Ltd Trinity Street Off Tat Bank Road Oldbury W. Midlands

Tel: 0121 543 2950 www.generationhireandsale.co.uk

Genuine Kwikstage Interserve Industrial Services Limited Intersection House 110 Birmingham Road West Bromwich W. Midlands B70 6RP

Tel. 0121 500 5000 Fax. 0121 525 5574 www.interserve.com

Haki Universal HAKI Limited Magnus Tame Valley Industrial Estate Tamworth Staffordshire B77 5BY

Tel: 01827 28 25 25 Fax: 01827 25 03 29 [email protected] www.haki.co.uk

Layher Allround Layher Limited Works Road Letchworth Herts. SG6 1WL

Tel: 01462 475100 Fax: 01462 475101 [email protected] www.layher.co.uk

Appendix J

58

Product Name Manufacturer

Peri Up Rossett Flex Peri Ltd Formwork Scaffolding Engineering Market Harborough Clifton upon Dunsmore Rugby Warwickshire CV23 OAN

Tel. 01788 861610 www.peri.ltd.uk

Plettac Contur Belle Engineering Ltd Sheen ‘nr Buxton’ Derbyshire SK17 0EU

Tel: 01298 84606 www.bellegroup.com

Plus Eight Turner Access 65 Craigton Road Glasgow G51 3EQ Scotland

Tel: 0141 440 0663 Fax: 0141 425 1073 [email protected] www.pluseight.net

SGB/Harsco Cuplok Harsco Infrastructure Services Ltd Harsco House Regent Park 299 Kingston Road Leatherhead Surrey KT22 7SG

Tel: 08705 288388 [email protected] www.harsco-i.co.uk

Note This list of CISRS Recognised System Scaffolding products is current at the time of printing. Check the website www.cisrs.org.uk for an up to date list

Notes

Notes

Tel: 0845 602 2418 email: [email protected] www.simian-risk.com

SAFETY + TRAINING + ACCESS CONSULTANTS



Full details of all our courses are available from our website

A one stoA one stoP sho shoPl Do your course

l Do your touch screen test

CSCS Health & Safety

Testing - now on siteCSCS Health & Safety

CsCstesting Centre

CSCS Health & Safety CSCS Health & Safety

3

www.simian-risk.com

l CISRS Tube and Fitting (Part 1, Part 2 & Advanced)Layher, Cuplok, Plettac, Kwikstage, Haki, Peri Up

l CISRS 2 day Product Training Layher, Cuplok, Plettac, Kwikstage, Haki, Peri Up

l CISRS 5 Day Supervisor Coursesl CISRS Scaffolding Inspection (Basic & Advanced)l SMSTS (Site Manager Safety Training Scheme)l SMSTS 2 Day Refresherl SSSTS Site Supervisorl CCNSG 2 Day Passport to Safetyl CCNSG 1 day Renewall EWPA Level 2

(Experienced Worker Practical Assessment)l Scaffold Apprentices and

Guaranteed Apprenticesl PASMA Mobile Towers & Low Levell System Scaffolding Experts

l CISRS Tube and Fitting (Part 1, Part 2 & Advanced)

Professional training courses

Simian Skill is the training division of Simian Risk Management Ltd., an occupational Health & Safety consultancy and training provider for the construction industry, specialising in access and work at height. Simian now have a track record of delivering achievers.

FreetrAining

Still available

under

Train to Gain

Certificate No. 045329Centre number 7084

Construction Industry SolutionsBusiness Support,Training & Jobssite sAFetY PLUs

FREE AND PART FUNDED TRAINING AVAILABLE NOW

T: 0115 979 4523 E: [email protected] W: www.safetyaccess.co.uk

We are one of the UK’s leading providers of scaffolding training and consultancy services. For nearly 20 years, our experienced, professional team has been meeting the needs of customers across the UK in a number of key areas:

After the highly successful launch of our Scaffolding Apprenticeships earlier this year, we are now planning our next intake of funded funded places for 16-24 year olds for 2011.2011.

PLACES AVAILABLE ON A STRICLY FIRST COME PLACES AVAILABLE ON A STRICLY FIRST COME FIRST SERVED BASIS ONLY!FIRST SERVED BASIS ONLY!

If you have a 16-24 year old already employed, or would consider employing an apprentice, please contact Sarah Cockell on 0115 979 4523 or email [email protected] for an application form.

Scaffolding Skills Training — CISRS, PASMA etc Scaffolding Apprenticeship Academy

Corporate Risk Management Consultancy Independent Scaffold Inspections

CISRS Basic and Advanced Scaffold Inspection Training

• Work at Height Safety Inspections, Auditing and Consultancy

• Management Safety Training—CISRS, SSSTS, SMSTS etc

CISRS, 4th Floor, 12 Bridewell Place, London EC4V 6AP Tel: 020 7822 7400 Fax: 020 7822 7401 www.cisrs.org.uk




i


AFFILIATED

Documents

General InformatIon Booklet i - Health & Safety Hubdocs.healthandsafetyhub.co.uk/...scaffolders-scheme-guide-info-booklet.pdf · l SSSTS Site Supervisor l CCNSG 2 Day Passport to