1 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

Introduction about general mcRNC CLI commands

2 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI Framework Introduction

1. If one wants to use SCLI, the SCLI service must be enabled.

Run the command fstestcli to check if the SCLI service is enabled or not. The SCLI service is enabled if SCLIFwkServer is OK. Here is example:

[root@CLA-0(OcteonRM-1) /root]# fstestcliSCLIFwkServer Service OK

2. When the SCLI service is ok, SCLI daemon can handle the input from operator. 3. Logging SCLI using the following command before executing any SCLI commands

fsclish4. The framework of SCLI is as follows:

3 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI cmdtree

SCLI is organized together as a tree. Operator can select going to the sub-node or executing some command at a node of the cmdtree.

FP has a build-in cmdtree. In the cmdtree, there are build-in nodes, such as show, set, add etc. And these nodes has sub-nodes.

When you execute command “fsclish”, it shall go into the interface of SCLI.

4 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

Presentation / Author / Date

mcRNC Processing Units

CF

PU

CS

PU

CS

PU

CS

PU

US

PU

US

PU

US

PU

EIP

U

HD

U

PT

U

BO

C-A

HD

SA

M-A

BS

AC

-A BO

C-A

BO

C-A

BO

C-A

BO

C-A

BO

C-A

BO

C-A

BO

C-A

Octeon Add-in Card HW (BOC-A) can run following Functional unit SW:

CFPU Common Functions Processing Unit

CSPU Cell Specific Processing Unit

USPU UE Specific Processing Unit

EIPU External Interface Processing Unit

In addition it is possible to install following functions to AMC slots:

HDU Hard Disk Unit

PTU Packet Timing Unit

5 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI hardware

root@CLA-0 [BCN_35_42] > show hardware state list

cabinet-1 : unit unknown /cabinet-1chassis-1 : unit unknown /cabinet-1/chassis-1chassis-2 : unit unknown /cabinet-1/chassis-2LMP-1-1-1 : node available /cabinet-1/chassis-1/piu-1LMP-1-2-1 : node available /cabinet-1/chassis-2/piu-1CLA-0 : node available /cabinet-1/chassis-1/piu-1/addin-1/CPU-1/core-0,1,10,2,3,4,5,6,7,8,9SE-0 : node available /cabinet-1/chassis-1/piu-1/addin-1/CPU-1/core-11CSPU-0 : node available /cabinet-1/chassis-1/piu-1/addin-2/CPU-1/core-0,1,2,3,4,5CSUP-0 : node available /cabinet-1/chassis-1/piu-1/addin-2/CPU-1/core-10,11,6,7,8,9USPU-0 : node available /cabinet-1/chassis-1/piu-1/addin-3/CPU-1/core-0,1,2,3USUP-0 : node available /cabinet-1/chassis-1/piu-1/addin-3/CPU-1/core-10,11,4,5,6,7,8,9EIPU-0 : node available /cabinet-1/chassis-1/piu-1/addin-4/CPU-1/core-0,1,2,3,4,5EITP-0 : node available /cabinet-1/chassis-1/piu-1/addin-4/CPU-1/core-10,11,6,7,8,9CSPU-1 : node available /cabinet-1/chassis-1/piu-1/addin-5/CPU-1/core-0,1,2,3,4,5CSUP-1 : node available /cabinet-1/chassis-1/piu-1/addin-5/CPU-1/core-10,11,6,7,8,9USPU-1 : node available /cabinet-1/chassis-1/piu-1/addin-6/CPU-1/core-0,1,2,3USUP-1 : node available /cabinet-1/chassis-1/piu-1/addin-6/CPU-1/core-10,11,4,5,6,7,8,9USPU-2 : node available /cabinet-1/chassis-1/piu-1/addin-7/CPU-1/core-0,1,2,3USUP-2 : node available /cabinet-1/chassis-1/piu-1/addin-7/CPU-1/core-10,11,4,5,6,7,8,9EIPU-2 : node available /cabinet-1/chassis-1/piu-1/addin-8/CPU-1/core-0,1,2,3,4,5EITP-2 : node available /cabinet-1/chassis-1/piu-1/addin-8/CPU-1/core-10,11,6,7,8,9CLA-1 : node available /cabinet-1/chassis-2/piu-1/addin-1/CPU-1/core-0,1,10,2,3,4,5,6,7,8,9SE-1 : node available /cabinet-1/chassis-2/piu-1/addin-1/CPU-1/core-11CSPU-2 : node available /cabinet-1/chassis-2/piu-1/addin-2/CPU-1/core-0,1,2,3,4,5CSUP-2 : node available /cabinet-1/chassis-2/piu-1/addin-2/CPU-1/core-10,11,6,7,8,9USPU-3 : node available /cabinet-1/chassis-2/piu-1/addin-3/CPU-1/core-0,1,2,3USUP-3 : node available /cabinet-1/chassis-2/piu-1/addin-3/CPU-1/core-10,11,4,5,6,7,8,9EIPU-1 : node available /cabinet-1/chassis-2/piu-1/addin-4/CPU-1/core-0,1,2,3,4,5EITP-1 : node available /cabinet-1/chassis-2/piu-1/addin-4/CPU-1/core-10,11,6,7,8,9CSPU-3 : node available /cabinet-1/chassis-2/piu-1/addin-5/CPU-1/core-0,1,2,3,4,5CSUP-3 : node available /cabinet-1/chassis-2/piu-1/addin-5/CPU-1/core-10,11,6,7,8,9USPU-4 : node available /cabinet-1/chassis-2/piu-1/addin-6/CPU-1/core-0,1,2,3USUP-4 : node available /cabinet-1/chassis-2/piu-1/addin-6/CPU-1/core-10,11,4,5,6,7,8,9USPU-5 : node available /cabinet-1/chassis-2/piu-1/addin-7/CPU-1/core-0,1,2,3USUP-5 : node available /cabinet-1/chassis-2/piu-1/addin-7/CPU-1/core-10,11,4,5,6,7,8,9EIPU-3 : node available /cabinet-1/chassis-2/piu-1/addin-8/CPU-1/core-0,1,2,3,4,5EITP-3 : node available /cabinet-1/chassis-2/piu-1/addin-8/CPU-1/core-10,11,6,7,8,9cluster : cluster available

6 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI hardware

Power off hardware fsclish -c "set hardware power off node EIPU-0 “

Power on hardware

fsclish -c “set hardware power on node EIPU-0 "

Node restart hardware fsclish -c " set hardware restart node EIPU-0 "

7 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI HAS

Show has state fsclish -c " show has state managed-object /OMURG“

OBJECT ADMINISTRATIVE OPERATIONAL USAGE ROLE PROCEDURAL DYNAMIC

/OMURG UNLOCKED ENABLED ACTIVE - -

-

Has operation[X] force-active - forces an RU active

[X] forcedswitchover - execute forced switchover

[X] inert - set inert mode on|off for a node or the cluster

[X] isolate - set a faulty node isolated

[X] lock - lock an MO

[X] power - power on|off a node or the cluster

[X] reset-block - set reset block on|off to a node

[X] restart - restart an MO

[X] shutdown - shutdown an MO

[X] switchover - execute switchover

[X] test-state - set test state for an MO

[X] unlock - unlock an MO

[BCN_35_42] > set has lock managed-object /SITPIURG-3

/SITPIURG-3 locked successfully.

[BCN_35_42] > set has unlock managed-object /SITPIURG-3

/SITPIURG-3 unlocked successfully. 0 "

8 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI m-job

Add m-job fsclish -c " add stats m-job granularity 900 name test1 omes 2007 continuous“

new job id: 2

Enable m-job [BCN_35_42] > set stats m-job id 2 enabled

Measurement job id: 2 enabled.

Show m-job

root@CLA-0 [BCN_35_42] > show stats m-job all id Name OmesID JobAdminState JobOperationalState ObjectListID StartTime StopTime GranPeriod Cont

Deactivate Periods

test1 2007 enabled activated [ALL] 2012.03.22 07:10:34 Non-stop 900 ye0 0

Remove m-job

root@CLA-0 [BCN_35_42] > set stats m-job id 2 disabled

Measurement job id: 2 will be disabled.

M-job report vim var/opt/nokiasiemens/SS_PM9/storage/results/A20120321.1800+0200-20120321.1815+0200_BCN_35_42:1.xml.gz

9 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI alarm

Alarm fsclish -c " show alarm active filter-by specific-problem 70158 “

Alarm ID : 157314

Specific problem : 70158 - FILE SYSTEM USAGE OVER LIMIT

Managed object : fsipHostName=CLA-0,fsFragmentId=Nodes,fsFragmentId=HA,fsClusterId=ClusterRoot

Severity : 3 (major)

Cleared : no

Clearing : automatic

Acknowledged : no

Ack. user ID : N/A

Ack. time : N/A

Alarm time : 2012-03-21 05:07:06:895 EET

Event type : x4 (quality of service)

Application : fshaProcessInstanceName=osmon,fshaRecoveryUnitName=FSNodeOSServer,fsipHostName=C

LA-0,fsFragmentId=Nodes,fsFragmentId=HA,fsClusterId=ClusterRoot

IAppl Addl. Info : /mnt/sysimg

Appl. Addl. Info : Filesystem /dev/VG_CLA-0_FP5LYNX/sysimg-R_IL_3.10.1.20.WR.bcn.r.20120305T130226Z

.472-mips64-wnd (ext2) mounted on /mnt/sysimg uses 98% of the space

10 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI sw-manage

Install sw-manage fsclish -c "set sw-manage install delivery /srv/Log/log/R_IL_3.10.1.23.WR.bcn.r.20120321T160556Z.527.iso“

Active sw-manage fsclish -c “set sw-manage activate delivery-label R_IL_3.10.1.20.WR.bcn.r.20120305T130226Z.472"

Show Sw-manage delivery fsclish -c "show sw-manage current node CLA-0 "

CLA-0 R_IL_3.10.1.20.WR.bcn.r.20120305T130226Z.472

fsclish -c " show sw-manage list "

R_IL_3.10.1.16.WR.bcn.r.20120203T164942Z.378

R_IL_3.10.1.20.WR.bcn.r.20120305T130226Z.472

11 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI Ethernet

Add Ethernet fsclish -c "add networking ether /EIPU-0 iface eth15 port sfp15“

Show Ethernet

fsclish -c “show networking ether owner /EIPU-0 iface eth15 "

Delete Ethernet fsclish -c "delete networking ether /EIPU-0 iface eth15"

Modify Ethernet

fsclish -c "set networking ether /EIPU-0 iface eth15 mtu 3000"

12 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI Vlan

Add Vlan fsclish -c "add networking vlan /EIPU-0 vid 125 vlaniface v125 realiface eth15"

Delete Vlan fsclish -c "delete networking vlan /EIPU-0 iface v125"

Show Vlan fsclish -c "show networking vlan owner /EIPU-0 iface v125 "

Modify Vlan fsclish -c " set networking vlan /EIPU-0 iface v125 mtu 3000 "

13 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI LAG

Add LAG fsclish -c " add networking linkaggr /EIPU-3 iface lag1 slave eth7 slave eth10 “

Delete LAG fsclish -c " delete networking linkaggr /EIPU-3 iface lag1 "

Show LAG fsclish -c " show networking linkaggr iface lag1 owner /EIPU-3 "

Modify LAG fsclish -c " set networking linkaggr /EIPU-3 iface lag1 del-slave eth7 "

14 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI IP-address

Add IP-address fsclish -c " add networking address dedicated /EIPU-0 iface eth8 ip-address 192.168.8.1/24 "

Delete IP-address fsclish -c " delete networking address dedicated /EIPU-0 iface eth8 ip-address 192.168.8.1 "

Show IP-address fsclish -c " show networking address owner /EIPU-0 iface eth8 "

Modify IP-address fsclish -c " set networking address dedicated /EIPU-0 iface eth8 ip-address 192.168.9.1 "

15 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI Static-route

Add Static-route fsclish -c "set routing node EIPU-2 static-route 10.10.10.1/32 nexthop gateway address 192.168.8.1

on“

Delete Static-route fsclish -c " set routing node EIPU-2 static-route 10.10.10.1/32 nexthop gateway address 192.168.8.1

off"

Show Static-route fsclish -c " show routing node EIPU-0 static-route config "

16 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI IPBR

Add IPBR

root@CLA-0 [BCN_35_42] > add ipbr ipbr-id 501 [MX] committed-bandwidth - committed bandwidth of IP based route (kbps): [0..1000000] kbps

[MX] committed-dcn-bandwidth - committed DCN bandwidth of IP based route (kbps): [0..1000] kbps

[MX] committed-sig-bandwidth - committed signaling bandwidth of IP based route (kbps): [0..50000] kbps

[MX] ipbr-name - name of IP based route (case insensitive, max 15 characters). Allowed characters: a-z, A-Z, 0-9, ".", "-"

[MX] route-bandwidth - route bandwidth of IP based route (kbps): [0..1000000] kbps

[OX] dspm-profile-id - the ID of DSCP to PHB mapping profile: [0..10], default is 0

[OX] ifc-nrtdch - algorithm for NRTDCH traffic control: [ E-RED (default) | IFC ]

[OX] ifc-nrthsdpa - algorithm for NRTHSDPA traffic control: [ E-RED (default) | IFC ]

[OX] remote-mux-port - remote UDP port for IP multiplexing: [49152..65535], default is 65535

[OX] scheduler-type - scheduler type: [ none (default) | virtualQueue | realQueue ]

Delete IPBR fsclish -c " delete ipbr ipbr-id 501 ipbr-name test501“

Show IPBR fsclish -c " show ipbr ipbr-id 501"

17 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI IPRO

Add IPRO

root@CLA-0 [BCN_35_42] > add ipro

[MX] iface - IP interface name [ IFACE-NAME ]

[MX] ip-address - IP address for IPRO

[MX] ipbr-id - ID of IP based route: [1..4095]

[MX] owner - the owner of the IPRO

[OX] mode - action when some transport bearers are in use: normal (default) or force

[OX] phb-set - PHB set to be on: ALL or PHB class name[EF,AF4,AF3,AF2,AF1,BE] combination separated with ",", default is ALL

[OX] vrf-id - virtual routing instance identifier: [0..63], default is 0

Delete IPRO fsclish -c " delete ipro delete-mode force ipbr-id 1 iface eth8 ip-address 10.10.10.1 owner

/EITPUPTMRRG-0 “

Show IPRO fsclish -c " show ipro ipbr-id 501"

18 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

SCLI Snapshot

Add Snapshot fsclish -c " save snapshot new config-name clean_env“

fsclish -c " save snapshot new startup config-name clean_env “

Delete Snapshot fsclish -c " delete snapshot config-name config-R_IL_3.10.1.20.WR.bcn.r.20120305T130226Z.472-

lwan "

Show Snapshot

fsclish -c " show snapshot list"

fsclish -c " show snapshot current-startup "

fsclish -c " show snapshot listall"

19 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

Call Management

20 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

Traffic flow

21 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

Ext and Main switch with PU

BCM56820

NPU#1

NPU#2

NPU#3

NPU#4

NPU#5

NPU#6

NPU#7

NPU#8

BCM56512

SFP

SFP+

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP

SFP+

SFP+

SFP+

SFP+

SFP+

BCM8726

BCM8726

BCM8726

BCM5461S

BCM53212

BCM5461S

RJ45

AMC#2

AMC#1

XE16(19)

XE17(20)

XE15(18)

XE12(15)

XE13(16)

XE10(13)

XE11(14)

XE8(11)

XE9(12)

XE6(9)

XE7(10)

XE4(7)

XE5(8)

XE3(6)

XE0(1)

XE1(2)

XE20(23)

XE21(24)

XE18(21)

XE19(22)

HG0(3)

HG1(4)

GE3(28)

0/21

0/22

0/23

0/24

0/1

0/2

0/5

0/6

0/19

0/20

0/25

0/28

0/27

0/26

0/1

0/2

0/3

0/16

0/17

0/24

0/4

0/5

0/6

0/7

0/8

0/9

0/10

0/11

0/12

0/13

0/14

0/15

0/180/190/20

0/210/220/23

0/7

0/8

0/9

0/10

0/11

0/12

0/13

0/14

0/15

0/16

0/17

0/18

XE2(5)

XE14(17)

GE0(0)

GE1(1)

GE2(2)

GE15(15)

GE3(3)

GE4(4)

GE5(5)

GE6(6)

GE7(7)

GE8(8)

GE9(9)

GE10(10)

GE11(11)

GE12(12)

GE13(13)

GE14(14)

HG1(25)

HG0(24)

#1

#0

#1

#0

#1

#0

#1

#0

#1

#0

#1

#0

#1

#0

#1

#0

GE0(25)

GE1(26)

GE2(27)

GE16(16)GE17(17)

GE18(18)GE19(19)

GE20(20)GE21(21)GE22(22)GE23(23)

SFP+1

SFP+2

SFP+3

SFP+4

SFP+5

SFP+6

0/3

0/40/25

0/26

22 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

Other generate commands for system

https://twiki.inside.nokiasiemensnetworks.com/bin/view/IPALightWiki/GeneralCommandsToCheckSystemStatus

ilfunitclifstestclilsmod

dxserrcliumutilgxiltrmclilgutilgx

eitputilIlsecliUPSIMUTILGXilfsddiag

23 © Nokia Siemens Networks Nokia Siemens Networks Proprietary and Confidential

Thanks