Upload
duongdien
View
239
Download
3
Embed Size (px)
Citation preview
1
General presentation November – 2012
V. Costa, A.Nohales,
D. Gutiérrez, C.Gomez
www.ube.ind.br
2
Index
Introduction UBE company
Polyurethanes
TPU elastomers
Waterborne PUD: coatings and adhesives
Conclusions
3
Index
Introduction UBE company
Polyurethanes
TPU elastomers
Waterborne PUD: coatings and adhesives
Conclusions
4
Introduction UBE company
UBE Latin America
Serviços Ltda
UBE AROUND THE WORLD
UBE Industries, Ltd.
Billion € 5,835. turnover* (2011)
11.026 employees
UBE IN EUROPE
UBE Corporation Europe, S.A.
384 M€ turnover (2011)
370 employees (2011)
5
Introduction UBE company
UBE product line
- Specialty Chemicals & Products
Specialty Products (Polyimides, Battery materials, Separation membranes, Ceramics)
Fine Chemicals (DMC, Diols, PCD, diphenol derivatives)
Pharmaceuticals
- Chemicals & Plastics
Caprolactam
Polyamides
Synthetic Rubber
- Cement & Construction Materials
- Machinery and Metal Products
- Energy and Environment
6
Index
Introduction UBE company
Polyurethanes
TPU elastomers
Waterborne PUD: coatings and adhesives
Conclusions
8
Synthesis
Diisocyanate Macrodiol Chain extender
Soft segment Hard segment
Block copolymer
Synthesis
Hard segment of urethane groups
Soft segment Hard segment
9
9
Terminal – Backbone – Bridge – Backbone – Terminal
Polyurethane mechanical properties can be defined by using an optimum backbone (R)
or by different molecular weight (n)
Durability properties:
Carbonate vs. ester & ether as bridge:
Higher hydrolysis
Higher chemical resistance
Excellent stain resistance
Better heat & weather resistance
Polycarbonate diol Polyester diol Polyether diol
Polyols structures
10
Index
Introduction UBE company
Polyurethanes
TPU elastomers
Waterborne PUD: coatings and adhesives
Conclusions
11
Method
TPU – Elastomers: Cooperation with ICMUV (University of Valencia)
Synthesis:
Polyol: BuDL : MDI = 1 : 2 : 3 molar (Two-shot process)
T = 80ºC and P = atmospheric in Argon
Residence time = 3h to 5h
Solid content = 22%wt (Solvent DMA)
Hard segment content = 48 %
Films:
Thin Film applicator NEURTEK RK 0,2 mm thickness
Drying 80ºC for 24 h
12
Properties UH-100 PH-100 POLYESTER POLYETHER
Density (g/cm3) 1.20 1.22 1.25 1.11
Hardness (Shore A) 92 89 93 83
Modulus elongation 100% (Mpa)
34 34 20 13
Modulus elongation 200% (MPa)
60 66 40 23
Tensile strength(Mpa) 70 75 69 41
Elongation at break (%)
231 222 323 345
Tear strength (MPa) 168 154 123 92
Glass transitions 31 26 2 7
Mechanical properties
POLYESTER = 1,4-BUTANEDIOL ADIPATE POLYETHER = POLYPROPYLENE GLYCOL
13
TPU: Mechanical properties
0 50 100 150 200 250 300 350 400
0
10
20
30
40
50
60
70
80
Te
nsile
Str
ess (
MP
a)
Strain (%)
Ether
Ester
Carbonate (UH-PH)
14
PCD
Degradation Resistance of TPU
0
20
40
60
80
100
120
UH PH Polyether Polyester
% t
ensi
le s
tren
gth
ret
enti
on
hydrolisis temperature oil weather
15
0 10 20 30 40 50 60
0
20
40
60
80
100
120
140
Re
ten
tio
n o
f e
lon
gatio
n (
%)
Heating time (days)
TPU: Heating resistance at 120 ºC
0 10 20 30 40 50 60
0
20
40
60
80
100
120
140
Re
ten
tio
n o
f te
nsile
str
en
gth
(%
)
Heating time (days)
TPU-Polyether very poor: Heating resistance
Ether
Ester
Carbonate (UH-PH)
Ether
Ester
Carbonate (UH-PH)
TPU-PCD excellent:
Heating resistance
16
TPU: Hydrolysis resistance in water at 80 ºC
0 10 20 30 40 50 60
0
20
40
60
80
100
120
140
PH-PCD
Ether
Rete
ntion o
f te
nsile
str
ength
(%
)
Inmersion time (days)
Ester
UH-PCD
0 10 20 30 40 50 60
0
20
40
60
80
100
120
140
Rete
ntion o
f elo
ngation (
%)
Inmersion time (days)
TPU-Polyester very poor: water resistance
TPU-PCD excellent:
Hydrolytic resistance
Ester
Carbonate (UH-PH)
Ether
Ether
Ester
Carbonate (UH-PH)
17
0
20
40
60
80
100
PU-UH PU-PH PU-PBA PU-PPG
Retention of tensile strentgh (%)
0
20
40
60
80
100
PU-UH PU-PH PU-PBA PU-PPG
Retention of elongation (%)
TPU: Weather Resistance
TPU-PCD excellent:
weather resistance
Weather conditions:
λ= 340 nm borosilicate filters,
Radiation of 35 W m2 nm,
T= (653) ˚C.
Dry cycle of 102 min continuous by 1 min of spray water (raining simulation).
18
MDI Butanediol
PH
(PCD)
Raw materials
UHC
(polyester &PCD)
PTMG
(polyether)
PCL
(polyester)
UT
(polyether & PCD)
19
Method TPU elastomers
System Molar ratio macrodiol:MDI:BDL
Hard segment content (wt%)
PUPH100-48 1:3:2 48
PUPH200-32 1:3:2 32
PUUHC100-48 1:3:2 48
PUUHC200-32 1:3:2 32
PUUT200-32 1:3:2 32
PUPTMG100-48 1:3:2 48
PUPTMG200-32 1:3:2 32
PUPCL100-48 1:3:2 48
PUPCL200-32 1:3:2 32
Synthesis:
Two-shot process in 100% solid content .
T = 70 ºC and atmospheric pressure in
Argon.
Residence time = 1 hour.
30 seconds at 2000 rpm after add BD
Curing for 12 hours at 50 bars & 100°C
20
Properties PUPH100-48 PUUHC100-48 PUPCL100-48 PUPTMG100-48
Hardness (Shore A) 92 81 -- 81
Modulus elongation 100% (Mpa)
251 202 151 141
Modulus elongation 200% (MPa)
352 333 261 221
Tensile strength(Mpa)
363 444 472 423
Elongation at break (%)
23514 25617 3617 38222
Mechanical properties
21
Mechanical properties
Polyol Molecular weight1000g/mol
0 50 100 150 200 250 300 350 400 450
0
10
20
30
40
50
60
Te
nsile
Str
ess (
MP
a)
Strain (%)
Ether
Ester UHC
PH
22
Properties PUPH200 -32
PUUHC200-32
PUPCL200 -32
PUUT200 -32
PUPTMG200-32
Hardness (Shore A) 86 76 -- -- 75
Modulus elongation
100% (Mpa)
121 81 61 81 71
Modulus elongation
200% (MPa)
241 141 101 111 111
Modulus elongation
300% (Mpa)
391 233 161 161 161
Tensile strength(Mpa)
502 406 465 321 374
Elongation at break (%)
3581 45818 56016 55710 61023
Mechanical properties
23
Mechanical properties
Polyol Molecular weight 2000g/mol
PH Esther
0 50 100 150 200 250 300 350 400 450 500 550 600 650
0
10
20
30
40
50
60T
en
sile
Str
ess (
MP
a)
Strain (%)
UHC Ether
UT
Ester PH
24
Heating resistance
0 10 20 30 40 50 60
0
20
40
60
80
100
120
140
PUPH100-48
PUUHC100-48
PUPTMG100-48
Rete
nti
on
of
ten
sile
str
en
gh
t (%
)
Heating time (days)
0 10 20 30 40 50 60
0
20
40
60
80
100
120
140
PUPH100-48
PUUHC100-48
PUPTMG100-48
Rete
nti
on
of
elo
ng
ati
on
(%
)
Heating time (days)
0 10 20 30 40 50 60
0
20
40
60
80
100
120
140 PUPH200-32
PUUHC200-32
PUPTMG200-32
Rete
nti
on
of
ten
sile
str
en
gh
t (%
)
Heating time (days)
0 10 20 30 40 50 60
0
20
40
60
80
100
120
140
PUPH200-32
PUUHC200-32
PUPTMG200-32
Rete
nti
on
of
elo
ng
ati
on
(%
)
Heatin time (days)
25
DMA results
Figure Storage modulus and Tan δ as a function of temperature
for the different segmented polyurethanes synthesized.
-100 -50 0 50 100 150 200
0,1
1
10
100
1000
10000
PUPH200-32
PUUHC200-32
PUPTMG200-32
PUUT200-32
Temperature (°C)
Sto
rag
e m
od
ulu
s (
MP
a)
Polyols Molecular Weight 2000 g/mol
0,0
0,2
0,4
0,6
0,8
1,0
1,2
1,4ta
n
26
Index
Introduction UBE company
Polyurethanes
TPU elastomers
Waterborne PUD: coatings and adhesives
Conclusions
27
27
Coatings based on ETERNACOLL© show:
Better chemical resistance
Improved scratch resistance
Higher gloss
Lower yellowish
Better adhesion to substrate
Coatings – Properties1
PUD WATERBORNE COATINGS
Properties Method Unit PH-100 UH-100 PPG2 PBA3
Chemical resistance ISO 4211:1979 4 4 2 2
Hardness Persoz ISO 1522:2007 62 121 33 109
Pencil hardness ISO 15184:1998 3B 4B 5B 6B
Gloss 60o ISO 2813:1999 % 99 78 79 38
Yellowness index ASTM D1925-70 7.7 8.9 10.8 9.8
Cross-cut test ISO 2409:2007 0 0 1 2 1 Stainless steel plates (ISO 1514:2004), after 7 days at 23 ºC and 50% 2 PPG: Polypropylene glycol, Mw 1000 3 PBA: Poly(1,4-butylene adipate), Mw 1000
28
28
Chemical resistance of PUD coatings just slightly depends on substrate and can be adjusted by UBE ETERNACOLL®
polycarbonate diols molecular weight & hard segments content.
For every substrate, there is an suitable grade of UBE ETERNACOLL® polycarbonate diol for providing an excellent
chemical resistance to PUD coatings.
Coatings – Chemical resistance ISO 4211:1979
Po
lye
ste
r-b
ase
d P
UD
UB
E E
TE
RN
AC
OLL
® -
ba
se
d
PU
D
In a same PUD formulation, impressively noticeable results only replacing traditional
polyols with UBE ETERNACOLL® polycarbonate diols.
PUD WATERBORNE COATINGS
29
29
Coatings – Heat resistance ISO 3248:1998 – Measurements after 15 days at 120 ºC
PUD WATERBORNE COATINGS
0
250
500
750
1000
1250
1500
Increment (%)
Polycarbonate diol grade
Increment of yellowness index
0
5
10
15
20
25
30
35
0 5 10 15 20
Increment of yellow index on oak wood (%)
UH100
UH200
Polyether
Polyester
UBE ETERNACOLL®
30
30
Coatings – Artificial ageing ISO 11507:2007
PUD WATERBORNE COATINGS
0
20
40
60
80
100
Retention (%)
Polycarbonate diol grade
Retention of hardness Persoz
0
20
40
60
80
100
Retention (%)
Polycarbonate diol grade
Retention of thickness
UBE ETERNACOLL®
Loss of thickness
Worst cross cut adhesion
31
31
Adhesives based on ETERNACOLL© show:
Shorter complete drying time
Stronger adhesion to substrates
Improved peel resistance
Enhanced lap-shear strength
Adhesives – Properties1
PUD WATERBORNE ADHESIVES
1 Acetone method: % solids w/w = 38, NCO/OH in prepolymer = 1.5
Without additives 2 PPG: Polypropylene glycol, Mw 1000 3 PBA: Poly(1,4-butylene adipate), Mw 1000 4 Dry-through time
Properties Method Unit PH-100 UH-100 PPG2 PBA3
Drying time4 ASTM D5895-03 h <2 <2 >6 >6
Cross-cut test ISO 2409:2007 0 0 1 2
T-peel test ISO 11339:2010 kN/m 1.9 2.9 0.3 1.6
Lap-shear strength ISO 4587:2003 kPa 4.8 3.4 3.1 3.3
PH-100-based coating PPG-based coating
32
32
Adhesives – Heat & weather resistance
PUD WATERBORNE ADHESIVES
Heat resistance ISO 3248:1998 Measurements after 15 days at 120 ºC
UBE ETERNACOLL®
33
Index
Introduction UBE company
Polyurethanes
TPU elastomers
Waterborne PUD: coatings and adhesives
Conclusions
34
Conclusions
-PCD CAN BE USED TO FORMULATE COATINGS, ADHESIVES
AND ELASTOMERS (CASE)
-THE CARBONATE GROUP INTERACTS MORE THAN ESTER
AND ETHER GROUP WITH HARD SEGMENT
-CARBONATE GROUP PROVIDE THE STRONGEST LINKING
GROUP FOR POLYOL USED IN HIGH PERFORMANCE
POLYURETANES
- PCD ACHIEVES THE HIGHEST DURABILITY MATERIALS
AGAINST HEATING, HYDROLYSIS, CHEMICALS, WEATHERING
35
35
Applications
UBE ETERNACOLL® polycarbonate diols are recommended for PUD coatings of surfaces with chemicals and/or high
heat exposure: no yellowish, excellent retention of original mechanical & adhesion properties, and gloss.
Au
tom
otive
Art
ific
ial le
ath
er
Le
ath
er
fin
ish
ing
Flo
orin
g
Wo
od
co
atin
g &
pa
ints
Au
tom
otive
fin
ishin
g
UBE ETERNACOLL®
36
Further information in: www.ube.ind.br
[email protected] / [email protected]
Muito Obrigado !!
Thanks for your attention !!