GENERAL PRODUCTS BROCHURE - coolex.com.kw · GENERAL PRODUCTS BROCHURE Decorative Mini Split Units. Concealed Ducted Split Series R22/R-407C/R-410A 24-60 MBH CONCEALED DUCTED SPLIT

For more technical information please visit www.coolex.com.kw

Ducted Split SeriesConcealed Ducted SplitSeries

Fan Coil Series

Rooftop Package Series

100% Fresh Air Rooftop Package Series

Air Cooled Scroll Water Chiller

Modular Air Handling Unit Air Cooled Screw Water Chiller

GENERAL PRODUCTS BROCHURE

Decorative Mini Split Units

www.coolex.com.kw

Concealed Ducted Split SeriesR22/R-407C/R-410A 24-60 MBH

CONCEALED DUCTED SPLIT WITH HERMETIC COMPRESSOR TROPICAL

50/60 Hz


2

www.coolex.com.kw

STANDARD SPECIFICATIONS INDOOR & OUTDOOR UNIT

2 TON TO 5 TON 6

24 MBH TO 60 MBH Models

Indoor Unit:• Compact design

• Low profile• Low sound power level

• For ducted application• 3 speed motors

• Easy maintenance • Easy installation• External terminal box• Cleanable air filter

Outdoor Unit:• High efficiency tropical design• Galvanized heavy gauge panels, oven baked powder coated• Designed to operate at severe ambient temperature up to 52°C without

tripping coil guard protection• External service valve with guage ports

Options & Accessories:• Wired Microprocessor Controller

• Wired digital thermostat• Wireless remote controller

• 240 Volt controls• Heat pump

OUTSTANDING FEATURES

Condenser FansAxial type condenser fan are used which precisely match with extra strong fan motor to ensure efficient hot air dissipation.

Evaporator CoilsThe coils are built up of ripple finned seamless copper tubes and mechanically bonded to scientifically designed louvered hydrophilic fins. The assembled coils are factory leak tested under water at a pressure of 350 psig for quality and leak free units.

Blower AssemblyThe units are provided with centrifugal fans which are statically and dynamically balanced, designed for low sound level operation.

Condenser Fan Motor The condenser fan motors are a 4/6 poles electric mo-tor which directly drive the condenser fans confirming to BS/IES standards. They are totally enclosed air over type electric motors with built-in thermal protector class F insulation.

Condenser CoilsThe coils are built up of ripple finned seamless copper tubes and mechanically bonded to scientifically designed louvered hydrophilic fins. The assembled coils are factory leak tested under water at a pressure up to 700 [psig] for quality and leak free unit.

Unit CasingThe casing sheet metal is fabricated from hot dipped G90, Zinc coat-ing and zero spangle galvanized steel, oven-baked powder coated.

CompressorThe compressors are high efficiency Scroll,hermetically sealed type. The compres-sors are equipped with internal motor protector and necessary accessories for safe operation.

Evaporator Blower MotorThe evaporator blower motor is directly drives the evaporator blower conforming to BS/IES standards it is open drip proof air over type electric motors with built-in thermal protector and permanently lubricated ball bearings class B insulation.

Drain PanThe drain pan is fabri-cated from galvanized steel. The drain pan is powder coat painted and the outer surface is thermally insulated.

3

Coolex UL listed, high efficiency concealed ducted split units are designed specifically for tropical operation with high performance, low power consumption, easy installa-tion and low noise operation, rated according to AHRI 210/240.

www.coolex.com.kw4

Ducted Split SeriesR22/R-407C/R-410A 48-340 MBH

DUCTED SPLIT WITH HERMETICCOMPRESSOR TROPICAL

50/60 Hz


www.coolex.com.kw5

Coolex Ducted Split Units can be used for cooling or heating with optional electrical heater, rated according to AHRI 340/360 and AHRI 210/240.

STANDARD SPECIFICATIONS INDOOR & OUTDOOR UNIT

Indoor Unit:• Compact design

• Low profile• Low noise Evaporator blower

• For ducted application• Easy maintenance

• Easy installation• Cleanable air filter

• Microprocessor based controller• 240 Volt controlsOutdoor Unit:• High efficiency tropical design• Galvanized heavy gauge panels, oven baked powder coated• Designed to operate at severe ambient temperature up to 52°C without tripping• External service valve with gauge ports

• Low power consumption• Low noise compressor and condenser fan

Options & Accessories:• Wired digital thermostat

• Wireless remote controller• Heat Pump

• Microprocessor control supporting different BMS protocols


Condenser FansAxial type condenser fan are used which precisely match with extra strong fan motor to ensure efficient hot air dissipation.

Evaporator CoilsThe coils are built up of ripple finned seamless copper tubes and mechanically bonded to scientifically designed louvered hydrophilic fins. The assembled coils are factory leak tested under water at a pressure of 350 psig for quality and leak free units.

Blower AssemblyThe units are provided with centrifugal fans which are statically and dynamically balanced, designed for low sound level operation.

Condenser Fan Motor The condenser fan motors are a 4/6 poles electric motor which directly drive the condenser fans confirming to BS/IES standards. They are totally enclosed air over type electric mo-tors with built-in thermal protector class F insulation.

Condenser CoilsThe coils are built up of ripple finned seamless copper tubes and mechani-cally bonded to scientifically designed louvered hydro-philic fins. The assembled coils are factory leak tested under water at a pressure up to 700 [psig] for quality and leak free unit.

Unit CasingThe casing sheet metal is fabricated from hot dipped G90, Zinc coat-ing and zero spangle galvanized steel, oven-baked powder coated.

CompressorThe compressors are high efficiency Scroll, hermeti-cally sealed type. The com-pressors are equipped with internal motor protector and necessary accessories for safe operation.

Drain PanThe drain pan is fabri-cated from galvanized steel. The drain pan is powder coat painted and the outer surface is thermally insulated.

Evaporator Blower MotorThe evaporator blower motor is Belt drives the evaporator blower conforming to BS/IES standards it is open drip proof air over type electric motors with built-in thermal protector and permanently lubricated ball bearings class B insulation.

4 TON TO 28 TON 11


www.coolex.com.kw6

Rooftop Package SeriesR22/R-407C/R-410A 048-400 MBH

PACKAGED AIR CONDITIONING UNITSWITH HERMETIC COMPRESSORTROPICAL

50/60 Hz


www.coolex.com.kw7

Coolex UL listed High Efficiency Package Units (PNG) are designed specifically for trop-ical operation with high performance, low power consumption, easy installation and low noise operations, rated according to AHRI 340/360 and AHRI 210/240.

Superior Efficiency• High EER (Energy Efficiency Ratio) exceeds the new ASHRAE 90.1

efficiency levels • Low power consumption

• High volumetric efficiency scroll compressors• Designed to operate at severe ambient temperature up to 52°C without tripping

Controls• Microprocessor Based Controller • Single point power supply• Color coded wires • Weather proof Control panel

Quality Assurance • All units in the PNG series are Factory run tested.

• Produced in an ISO 9001-2000 listed manufacturing facility.• Constructed in compliance with ASHRAE 15 safety requirements.

• UL listed, in accordance to UL 1995 & CSA C22.2 No.236-11.Certificate Number 20130301-SA33594


Condenser FansThe fans are selected for optimum efficiency and maximum sound power reduction, propeller type and direct driven, up-ward discharge and provided with fan grille mounted on the casing.Condenser CoilsThe coils are built up seamless copper tubes and mechanically bonded to scientifically designed louvered hydrophilic fins.The assembled coils are factory leak tested under water at a pressure up to 700 psig for quality and leak free unit.Condenser Fan Motor Condenser fan motors are totally enclosed air-over type with class F insulation. The motors are provided with inherent ther-mal protection and auto rest type.CompressorThe compressors are hermetic scroll type provided with crank-case heater, internal pressure relief valve which provides high pressure protection to the refrigerant system and rubber vibra-tion isolators for quiet and efficient operation. The compressors are equipped with internal motor protector for safe operation. The compressors are built to NF, VPE, CSA, & UL certification.Evaporator CoilsThe coils are built up of ripple finned seamless copper tubes and mechanically bonded to scientifically designed louvered hydrophilic fins. The assembled coils are factory leak tested under water at a pressure of 350 psig for quality and leak free units.Evaporator FanThe units are provided with centrifugal fans which are statically and dynamically balanced, designed for low sound level opera-tion Belt driven.

Drain PanThe drain pan is fabricated of galvanized steel. The drain pan is powder coat painted and the outer surface is thermally insu-lated.Unit CasingThe casing sheet metal is fabricated from hot dipped G90, Zinc coating and zero spangle galvanized steel, oven-baked pow-der coated.The unit is provided with an integral weath-er resistant control panel for outdoor ap-plication.Panels and access doors are provided for inspection and access for all internal parts.

STANDARD SPECIFICATIONS

• Double skin for evaporator side• Heat Pump• Coil protection materials:

a) Polyurethane pre-coat Aluminum fins with copper tubes

b) Tinned copper tubes with copper fins• Condenser coil guard• Mesh around perimeter of condenser sections• Stainless steel drain pan• Double side drain connections• Other types of filter: synthetic fiber media for flat filter, 2” or 4” flat filter, bag filter• Mixing box• Vibration isolation for the unit :

a) Neoprene rubber padsb) 1” spring isolator

• Lockable door for the control panel• Electric heaters• Compressor circuit breaker• Mild ambient (fan cycling) control• Duct sensor• Anti - ice thermostat• Volt free contacts• External overload• Ultra violet light• Dirty filter indication• Fire alarm connection• Economizer controller• Microprocessor control supporting different BMS protocols

OPTIONALSPECIFICATIONS

4 TON TO 33 TON 19


Condenser Fans

Condenser Coils

Compressor

Drain Pan

Evaporator Coils

Evaporator Fan

Unit Casing

Condenser Fan Motor

www.coolex.com.kw8

100% Fresh Air Rooftop Package Series R22/R-407C/ R-410A 048-400 MBH

PACKAGED AIR CONDITIONING UNITSWITH HERMETIC COMPRESSORTROPICAL

50/60 Hz


www.coolex.com.kw9

Coolex High Efficiency Fresh Air Package Units (FPNG) are designed specifically for tropical operation with high performance, low power consumption, easy installation and low noise operations.

Superior Efficiency• High EER (Energy Efficiency Ratio) exceeds the new ASHRAE 90.1

efficiency levels • Low power consumption

• High volumetric efficiency scroll compressors• Designed to operate at severe ambient temperature up to 52°C without tripping

• Low noise, high static and efficiency Backward inclined fans

Controls• Microprocessor Based Controller • Single point power supply• Color coded wires • Weather proof Control panel

Quality Assurance • All units in the FPNG series are Factory run tested.

• Produced in an ISO 9001-2000 listed manufacturing facility.• Constructed in compliance with ASHRAE 15 safety requirements.


Condenser FansThe fans are selected for optimum efficiency and maximum sound power reduction, propeller type and direct driven, up-ward discharge and provided with fan grille mounted on the casing.Condenser CoilsThe coils are built up seamless copper tubes and mechanically bonded to scientifically designed louvered hydrophilic fins.The assembled coils are factory leak tested under water at a pressure of 450 psig for quality and leak free unit.Condenser Fan Motor Condenser fan motors are totally enclosed air-over type with class F insulation. The motors are provided with inherent ther-mal protection and auto rest type.CompressorThe compressors are hermetic scroll type provided with crank-case heater, internal pressure relief valve which provides high pressure protection to the refrigerant system and rubber vibra-tion isolators for quiet and efficient operation. The compressors are equipped with internal motor protector for safe operation. The compressors are built to NF, VPE, CSA, & UL certification. leading compressors are provided with hot gas bypass system.Evaporator CoilsThe coils are built up of ripple finned seamless copper tubes and mechanically bonded to scientifically designed louvered hydrophilic fins. The assembled coils are factory leak tested under water at a pressure of 350 psig for quality and leak free units.Evaporator FanThe units are provided with centrifugal Backward inclined fan which are statically and dynamically balanced, designed high efficiency for low sound level operation Belt driven.

Drain PanThe drain pan is fabricated of galvanized steel. The drain pan is powder coat painted and the outer surface is thermally insulated.Unit CasingThe casing sheet metal is fabricated from hot dipped G90, Zinc coating and zero spangle galvanized steel, oven-baked pow-der coated.The unit is provided with an integral weath-er resistant control panel for outdoor ap-plication.Panels and access doors are provided for inspection and access for all internal parts.


• Double skin for evaporator side• Heat Pump• Coil protection materials:

a) Polyurethane pre-coat Aluminum fins with copper tubes

b) Tinned copper tubes with copper fins• Condenser coil guard• Mesh around perimeter of condenser sections• Stainless steel drain pan• Double side drain connections• Other types of filter: synthetic fiber media for flat filter, 2” or 4” flat filter, bag filter• Mixing box• Vibration isolation for the unit :

a) Neoprene rubber padsb) 1” spring isolator

• Lockable door for the control panel• Electric heaters• Compressor circuit breaker• Mild ambient (fan cycling) control• Duct sensor• Anti - ice thermostat• Volt free contacts• External overload• Ultra violet light• Dirty filter indication• Fire alarm connection• Economizer controller• Microprocessor control supporting different BMS protocols

OPTIONALSPECIFICATIONS

4 TON TO 33 TON 19


Condenser Fans

Condenser Coils

Compressor

Drain Pan

Evaporator Coils

Evaporator Fan

Unit Casing

Condenser Fan Motor

www.coolex.com.kw10

Fan Coil SeriesLow Static 200-1200 cfm


800-2000 cfmHigh Static

www.coolex.com.kw11

COOLEX High Efficiency High & Low Static Fan Coil Units are highly efficient means of turning a water chiller, or hot water boiler into an efficient quiet air conditioning sys-tem with high performance,low power consumption, easy installation “and low noise operation for both commercial and residential applications applications.”


Chilled Water CoilsHigh heat transfer efficiency coils are built up of ripple finned seamless copper tubes and mechanically bonded to scientifically design louvered hydrophilic fins.The assembled coils are factory leak tested un-der water at a pressure of 350 psig for quality and leak free units.

Drain PanDrain Pan is constructed from a one piece painted galvanized sheet metal welded carefully to protect from leakage.The insulation shall be special designed to be perfect

Blower AssemblyThe units are provided with new designed low speed and Wide impellers centrifugal fan which are statically and dynamically balanced, designed for low sound level operation

Blower MotorMotors are of permanent split capacitor type of maximum efficiency and minimum noise with permanently lubricated, sealed sleeve bearings.Smart construction design and insulation with good noise elimination effect make the unit most lowest noise level.

8

200 CFM TO 1200 CFM Models

6

800 CFM TO 2000 CFM Models

• Compact design • Low profile

• Low sound power level • For ducted & Ducts free applications

• 3 speed motors• Easy maintenance

• Easy installation• External terminal boxOptional Features

• Chilled water coil (FCL series):Two pipes system with 2,3 , or 4 rows cooling coilsFour pipe system with 2,3 ,rows cooling coils, and 1 row Heating coil• Chilled water coil (FCH series):Two pipes system with 3 rows cooling coilsFour pipe system with 2 rows cooling coils, and 1 row Heating coilLeft hand or Right Hand coil connections• Tinned copper fins

• Stainless steel drain pan with standard or extended length• Electric heaters up to 5 kW capacity

• Nylon or Aluminum air filters• Decorative wall mounted type Thermostats Operating mode:

cooling or heating Controlling valve packages & •Electric heater

• Control valves kits ( 2 way, 3 way, balancing,and ball valves)


FCL

FCH

www.coolex.com.kw12

RA Air Handling Unit1,100 - 44,000 cfm

CENTRAL STATIONAIR HANDLING UNIT

50/60 Hz


www.coolex.com.kw13

Coolex Eurovent certified modular air handling unit design concept provides the flex-ibility to meet the rising demand of indoor air quality. The RA range can be manufac-tured to almost any configuration to meet customers’ requirements.

• Eurovent certified Air Handling Units series

• Applicable for Residential, Commercial, Industrial & Hygienic application

• Variety of applications ( standard & Low cfm Applications, 100 % Fresh Air applications with Energy Recovery modules)

• Custom build AHU as per customer requirements

• Modular design provide flexibility to meet rising demand of better indoor air quality

• Using the best designed aluminum sections (Penta Post) to provide strength and rigidity to units sections

• Varity of sections, and components options available as per customers requirements

• High performance with air tight structure

FanDouble inlet width centrifugal fan as standard. All fans are belt-driven by motors and the impellers are keyed to the shafts and all fans statically and dynamically balanced (Forward curved, Backward inclined curved, Aerofoil Profile, Plug Fan)Fan motors are totally enclosed fan cooled (TEFC), foot mounted, 2 or 4 poles, IP55 protected and class – F insulated

Energy RecoveryEnergy recovery systems typically incorporate heat exchange equipment to reduce energy costs:

- Energy Recovery Wheel- Plate Heat Exchanger- Heat Pipe- Run around coil

Steam Humidifier- Immersed Electrode Humidifier- Immersed Heater Humidifier- Air Washer (Adiabatic)

Available also variety of options as per customer requirements:- Electric heaters- SOUND ATTENUATORS- Spring isolator - Inlet guide vanes for VAV control.- Two speed motor.- Plenum section.- Discharge motorized damper.- Discharge Back draft damper.- Bulkhead Lamp

13

1100 CFM TO 44,000 CFM Models

CasingConstructed of framed modules. For maximum rigidity and strength, structure frame is made of extruded anodized aluminum profile called “Penta-Post”.PanelsConstructed from double wall, sandwich type panels (25mm or 46mm thickness), with inner and outer panels different thicknesses as per requirements (0.8,1,1.2 mm thickness). For best thermal and acoustical performance, all panels injected with polyurethane foam insulation having density of 42 Kg / m³ (Fiber glass insulation available as option)Unit BaseRA provided with base under the unit as standard. The unit base is a fabricated, welded galvanized sheet metal base of high gage along the perimeter of the unit.Intake / Mixing BoxRA equipped with heavy duty, multi blade, and low leakage damper to modulate and control the air flow.FiltersWide variety of air filtration system are available to choose from according to customer requirements:

- Pre filters 2” or 4” panel filter with aluminum washable media or 2” fiberglass / synthetic disposable media

- Vee Filter or Low velocity Filter- Bag filter- HEPA Filter- Carbon Filter- Electrostatic Filter

CoilsVariety of coils including chilled water, direct expansion (R134a,R407c, R22) and hot water coil are available to meet a wide range of applications requirements. Coil Comply to AHRI 410 standard.

www.coolex.com.kw14

ACL Air Cooled Scroll Water Chiller R22/R-407C/ R-410A 03 - 55 TR

RESIDENTIAL AND COMMERCIALAIR COOLED SCROLL WATERCHILLER

50/60 Hz


www.coolex.com.kw15

Coolex ACL air cooled Chilled is a high efficiency series designed to be suitable for gulf harsh environment with optimum performance where it has been designed for a higher efficiency, low power consumption with a less than 1.6 KW/TON, easy installa-tion and low noise operation and also to provide central cooling for commercial and industrial application with the high reliability.

• Designed for Residential and Commercial applications• Designed to conform to ASHRAE 15-1994 (Safety Code for Mechanical

Refrigeration).• Performance Data are rated in accordance to AHRI standard 550/590-98.

• Painted panel Salt Spray test in accordance to ASTM B-117 Salt Spray (Fog) Testing. • Steel Sheet panels lock forming quality conforming to ASTM A-653 Commercial

weight G-90.• Control panel design is equivalent to NEMA 4 (IP55 - Weather proof and dust free).• Internal power Connection High Voltage & control wire cables identification & markers As per NEC standard.• Complete wired control panel with advanced Microprocessor controller matching with Building Management System. • High efficiency scroll hermetic compressors.• Low noise aerodynamic design condenser fan, direct drive with rolled for venture design to eliminate short circuiting of airflow.

• All fans are propeller type with aerodynamic design, top discharge & provided with protective grill.

• All fan motors are Totally Enclosed Air Over(TEAO) type with class “F” winding insulation, ball bearing & inherent thermal protection of

automatic reset.• Thermostatic expansion valve as standard accessories.

• Easy service accessibility


HERMETIC SCROLL COMPRESSORSScroll Compressor has proven to be the most reliable, most efficient and quietest compressor technology available today. Compressors have 50% fewer moving parts, which increases reliability and reduces sound levels. They also operate without suction valves, for added reliability and ease of maintenance.CONDENSERS COILThe coils built up from copper tube expanded into Hydrophilic aluminum fins. Assembled coils are factory leak tested under water at a pressure of 450 psig for quality and leak free unit. They also undergo dry chemical cleaning after Manufacturing for optimum system cleannessBRAZED PLATE WATER COOLER (UNITS UP TO16TR)High efficiency brazed plate heat exchanger. Plates are brazed at all contact points, ensuring optimal heat transfer efficiency and pressure resistance. The plates are designed to provide the longest possible life times.SHELL AND TUBE HEAT EXCHANGER(FOR UNITS FROM 20T.R AND ABOVE)High efficiency DX shell & tube type cooler with removable “U” shape bundled tubes are made

of internally grooved copper tubes expanded into heavy steel tubular sheets.CONDENSER FAN MOTOR All condenser fan motors are totally enclosed air over type (TEAO) with class “F“ winding insulation and ball bearings for high ambient application. The motors shall be three phase with inherent thermal protection of automatic reset type.UNIT CASING (CABINET)The unit casing are perfectly designed to eliminate the corrosion problem usually associated with outdoor equipment.CONTROL PANELThe control panel design is equivalent to NEMA 4 (IP55) with hinged door for easy access ensuring dust and weatherproof construction. The control voltage is 240V-1Ph-50Hz. The electrical controls used in the control panel are reliable in operation at high ambient conditions (Up to 70°C) for a long period.

STANDARD FEATURE

The advanced microprocessor controller is designed with the latest technology to give the best performance of the chiller

MICROPROCESSOR CONTROL

03 TON TO 55 TON 15

10 KW TO 193 KW Models

and to ensure its efficiency and reliability.capable to communicate with the building management system (BMS) open protocols like BacNet, LON, Modbus through optional gateway interfaces

www.coolex.com.kw16

ACS Air Cooled Screw Water Chiller R-134a 45 - 430 TR

COMMERCIAL AND INDUSTRIALAIR COOLED SCREW WATERCHILLER

50/60 Hz


www.coolex.com.kw17

Coolex UL listed ACS air cooled Screw Chillers Series is a high efficiency series designed to be suitable for gulf harsh environment with optimum performance where it has been designed for a higher efficiency, low power consumption with a less than 1.6 KW/TON, easy installation and low noise operation and also to provide central cooling for commercial and industrial application with the high reliability utilizing the environment friendly R-134a refrigerant

• Designed to conform to ASHRAE 15-1994 (Safety Code for Mechanical Refrigeration).

• Performance Data are rated in accordance to AHRI standard 550/590-98.• Painted panel Salt Spray test in accordance to ASTM B-117 Salt Spray (Fog)

Testing. • Steel Sheet panels lock forming quality conforming to ASTM A-653 Commercial

weight G-90.• Control panel design is equivalent to NEMA 4 (IP55 - Weather proof and dust free).

• Internal power Connection High Voltage & control wire cables identification & markers As per NEC standard.• Complete wired control panel with advanced Microprocessor controller matching with Building Management System. • Compressors are part winding start. • Low noise aerodynamic design condenser fan, direct drive with rolled for venture design to eliminate short circuiting of airflow.

• All fans are propeller type with aerodynamic design, top discharge & provided with protective grill.

• All fan motors are Totally Enclosed Air Over(TEAO) type with class “F” winding insulation, ball bearing & inherent thermal protection of

automatic reset.• Electronic expansion valve as standard accessories.

• Liquid injection valve • Easy service accessibility


SEMI HERMETIC SCREW COMPRESSORAll compressors are compact semi-hermetic twin screw of the high capacity and high efficiency and Suction gas cooled with suction filter.

CONDENSERS COILThe coils built up from copper tube expanded into aluminum hydrophilic fins. Assembled coils are factory leak tested under water at a pressure of 450 psig for quality and leak free unit. They also undergo dry chemical cleaning after Manufacturing for optimum system cleanness

SHELL AND TUBE HEAT EXCHANGERHigh efficiency DX shell & tube type cooler with removable “U” shape bundled tubes are made of internally grooved copper tubes expanded into heavy steel tubular sheets.

CONDENSER FAN MOTOR All condenser fan motors are totally enclosed air over type (TEAO) with class “F“ winding

insulation and ball bearings for high ambient application. The motors shall be three phase with inherent thermal protection of automatic reset type.

UNIT CASING (CABINET)The unit casing are perfectly designed to eliminate the corrosion problem usually associated with outdoor equipment.

CONTROL PANELThe control panel design is equivalent to NEMA 4 (IP55) with hinged door for easy access ensuring dust and weatherproof construction. The control voltage is 240V-1Ph-50Hz. The electrical controls used in the control panel are reliable in operation at high ambient conditions (Up to 70°C) for a long period.

STANDARD FEATURE

The advanced microprocessor controller is designed with the latest technology to give the best performance of the chiller

MICROPROCESSOR CONTROL

45 TON TO 430 TON 34

158 KW TO 1,512 KW Models

and to ensure its efficiency and reliability.capable to communicate with the building management system (BMS) open protocols like BacNet, LON, Modbus through optional gateway interfaces

www.coolex.com.kw18


Decorative Mini Split Units

50/60 Hz

www.coolex.com.kw19

ColdCatalyst FilterEliminate formaldehyde and other volatile organic compounds (VOCs) as well as harmful gases and odors.

Air SwingEquipped with vertical louvers motor for proper air distribution.

Anti-Rust CabinetWith this technique, the cabinet is well protected from being rusted.

Low Noise Airflow SystemWithout decreasing the airflow volume and capacity output, large diameter cross flow fan can bring down the indoor unit noise level by lowering the fan speed.

Turbo OperationWith this function, the air conditioner will maximize the output of cooling or heating capacity, make the room cool down or heat up rapidly, and attain the desired temperature in the shortest time.

Sleep ModeThis function enables the air conditioner to automatically increase (cooling) or decrease (heating) 1ºC per hour for the first two hours, then holds steady for the next 5 hours, after that it will switch off. This characteristic maintains both energy saving and comfort in night operation.

SPECIFICATIONS

Auto-RestartIf the air conditioner breaks off unexpectedly due to the power cut, it will restart with the previous function setting automatically when the power resumes.

Coolex Decorative Mini split units are designed specificallyfor tropical operation with high performance, low power consumption, easy installation and low noise operation.

1 TON TO 3 TON 5


www.coolex.com.kw20

NOTES

www.coolex.com.kw21

NOTES

www.ric.com.kw22

About RIC

Refrigeration Industries Company (KSE 504) is a group holding company with diversified interests in manufacturing, contracting and services. Recognized regionally for our engineering capabilities and management excellence, RIC and its subsidiaries offer a wide range of high quality products and services that cater to both residential and commercial customers, in the areas of climate control technologies and specialized storage solutions.

In view of the growing Kuwait infrastructure and the limitations imposed on it by the country’s arid climate, the Refrigeration Industries Company was established 43 years ago in 1973, by Amiri Decree. The company’s operations began with the construction of the first cold stores in the region, to enable the storage of the imported foods, on which Kuwait relied. Along with the development and advancement of the country, so has RIC prospered and expanded, and is now a milestone in the history of modern Kuwait.

RIC takes pride in its successful record and the many accolades it has garnered over time, but the greatest achievement has been the provision of comfort and protection from the harsh climate, to the people of Kuwait.

More than 43 years of uninterrupted service, overcoming extreme weather conditions, war, economic recessions and ever increasing competition, is testimony to the fact that RIC has met the expectations and responsibilities that was envisioned at the beginning and also highlights the tenacity and vision to exceed them in the future.Facts throughout the years

1973 Warehouses were established by Amiri Decree.

1979 RIC Constructed the Medical Cold Stores Complex, the world’s largest at that time.

1980 RIC Air Conditioning manufacturing plant set up in Sulaibya.

1981 Production of Package & Mini-Split A/Cs started under York-Gulf.

1984 RIC was listed in Kuwait Stock Exchange.

1986 COOLEX brand Production Launched.

1991 RIC rebuilt the manufacturing plant destroyed during the war.

1997 Achieved ISO Certification ISO 9001:1994.

2002 ETL Designed testing lab became fully operational.

2004 Privatization of RIC.

2010 COOLEX becomes the first A/C Unit to Pass MEW’s new regulations.

2010 RIC Factory Renovation and Expansion into neighboring countries.

2012 Achieved UL & AHRI Certification for Coolex Units.

2014 Achieved SASO Certification for Concealed Ducted Split Series.

2014 Achieved EUROVENT Certification for Air Handling Units AHU.

2014 Achieved UL Certification for Air Cooled Chillers.

2015 Achieved ISO 17025 Certification for Psychrometric Laboratory.

2016 Achieved Energy Efficiency Certification for Concealed Ducted Split Series & Rooftop Package units (Kingdom of Bahrain).

نبذة عن ال�شركة �سركة �سناعات التربيد (متداولة يف �سوق الكويت للأوراق املالية برقم الت�سنيع واملقاوالت االأن�سطة تعمل يف جمال 504) هي �سركة متنوعة واخلدمات. ونحن نقدم جمموعة كبرية من املنتجات واخلدمات واحللول التقنية يف جمال مواجهة الظروف املناخية وحلول التخزين. وقد حازت

ال�سركة على اإعرتاف اإقليمي بقدراتها الهند�سية وكفاءتها االإدارية.�سركة �سناعات التربيد هي جمموعة �سركات تهدف اإلى توفري اأعلى اإحتياجات تلبي التي واخلدمات املنتجات حيث من اجلودة م�ستويات عملئها ال�سكنية والتجارية. وعلى مدى ثلثة و اأربعون عاما م�ست على اإن�ساء �سركتنا فقد اإ�ستطعنا اأن نوطد اأقدامنا يف جميع قطاعات ال�سوق الكويتي. ونحن اإذ نفتخر باالإجنازات التي حققناها, اإال اأننا اأ�سد فخرا باأننا متكنا من الوقوف اإلى جانب اأهل الكويت على مدى �سنوات طويلة درجات حيث من �سواء القا�سية املناخية الظروف تقلبات مواجهة يف

احلرارة العالية اأو االأتربة اأو الرطوبة.وباإعتبارها اإحدى ال�سركات ال�سناعية العاملة يف دولة الكويت, فقد وقد النجاح, لتحقيق �سعيها يف كبرية واآمال ال�سركة حتديات واجهت كانت ال�سركة – وال تزال – معلما من املعامل املهمة يف نظر اأهل الكويت القا�سية الطبيعة تغري اأن اإ�ستطاعت وخدمات منتجات من قدمته ملا ملناخ الكويت. فبعد نحو 43 عاما تقريبا, ال يزال ال�سوؤال مطروحا حول حتقيقنا لهذه التوقعات, فهل اإ�ستطاعت ال�سركة اأن تتحمل م�سوؤولياتها اأربعني و ثلثة مدى فعلى باالإيجاب, الرد وياأتي االأكمل؟ الوجه على عاما تقريبا مل تتوقف ال�سركة خللها عن االإ�ستمرار يف تقدمي خدماتها اأو القا�سية الطق�س ظروف يف متثلت التي ال�سعوبات رغم واأعمالها اإرتفاع حدة املناف�سة, فقد كانت كل اأو اأو الك�ساد االقت�سادي احلروب واحدة من هذه الظروف مبثابة �سهادة على اأننا حققنا ما وعدنا به وما

عقدنا العزم على تنفيذه. حقائق وتواريخ

1973 مت اإن�ساء امل�ستودعات بناء على مر�سوم اأمريي.باإن�ساء التربيد �سناعات ل�سركة الكويتية ال�سحة وزارة عهدت 1979جممع م�ستودعات خمازن التربيد الطبية, وقد كان هذا املجمع حينها اإلى هو االأ�سخم من نوعه على م�ستوى العامل, وقد و�سلت تكلفته

12,000,000 دينار كويتي.1980 مت اإن�ساء م�سنع مكيفات الهواء التابع ل�سركة �سناعات التربيد يف

ال�سليبية.1981 بدء اإنتاج اأجهزة التكييف املدجمة واملنف�سلة ال�سغرية حتت علمة

.York-Gulf1984 مت قيد �سركة �سناعات التربيد يف �سوق الكويت للأوراق املالية.

1986 بدء اإنتاج مكيفات علمة كولك�س.1991 قامت �سركة �سناعات التربيد باإعادة بناء م�سنعها الذي دمرته

احلرب.1997 احل�سول على �سهادة االآيزو 1994:9001

(ETL) 2002 بدء ت�سغيل خمترب فح�س وحدات التكييف2004 خ�سخ�سة �سركة �سناعات التربيد.

2010 كانت وحدات كولك�س اأول وحدات تكييف هواء جتتاز اللوائح التي اأقرتها (وزارة الكهرباء واملاء).

2010 مت جتديد م�سنع �سركة �سناعات التربيد وبدء التو�سع والت�سدير اإلى الدول املجاورة.

2012 احل�سول على �سهادة UL و AHRI الأجهزة التكييف كولك�س. 2014 احل�سول على �سهادة SASO الأجهزة التكييف املنف�سلة.

2014 احل�سول على �سهادة EUROVENT الأجهزة مناولة الهواء.2014 احل�سول على �سهادة UL ملربدات الهواء ال�سيلر.

2015 احل�سول على �سهادة االأيزو ISO 17025 ملخترب ال�سيكرومرتية.و املنف�سلة التكييف الطاقة الأجهزة كفاء �سهادة 2016 احل�سول على

الوحدات املدجمة (مملكة البحرين).

www.coolex.com.kw23

CENTRAL AIR CONDITIONING AND SPLIT UNITCoolex continuously works towards the improvement of its products. Hence, the design and specifications of the ordered product may vary without prior notice.

Please contact Sales and Marketing Department [email protected] or www.coolex.com.kw for specific information on the current design and specifications. Ref no.: BG19-5-001

COOLEX is a subsidiary of the RIC Groupwww.ric.com.kw

Coolex Distributors

State of Qatar

Al Jaber for air conditioning & Refrigeration industriesAddressTelFaxMobileMobileEmailWebsite

: PO.Box 23546 Doha: +974 44210963: +974 44448919: +974 55610321: +974 55843255: [email protected]: www.jaric-qa.com

Sudan

Abina For Advises And Engineering Work Company Address

TelFaxMobileEmail

: Katrena Street - East Qurashi Park Sudan – Khartoum : +249 574064 : +249 574064 : +249 900900246/247/248/249/250/251/252: [email protected]

Iran

Capital ICEBERG Limited Company Address

TelFaxMobileEmailEmailEmailWebsite

: No. 31, 3rd Floor, Aghdasieyeh Trade Center Aghdasiyeh Street. Tehran – Iran : +98 (021) 26110510 : +98 (021) 26110510 : +98 912 119 2961 : [email protected]: [email protected]: [email protected]: www.capitaliceberg.com

Islamic Republic of Pakistan

AG TEK Pvt. Ltd.Address

TelFaxCellMobileEmailEmailWebsite

: 179-S, Imperial Garden Paragon City Lahore - Pakistan : +92-42-37187640-43: +92-42-37187644: +92-300-4745624: +92-321-2280011 : [email protected]: [email protected]: www.agtek.com.pk

Egypt

Total Group Egypt CompanyAddress

TelMobileMobileEmailEmailWebsite

: 4 Buildings Al-Noor – Sheraton Housings Cairo – Egypt: +202267240/837: +20109966627: +21201299444: [email protected]: [email protected]: www.coolex-eg.com

Syrian Arab Republic

Team for Engineering & Trading co.Address

TelTel-FaxMobileMobileEmailEmailWebsite

: Damascus - Kafer Souseh P.O.Box: 16311: +963 11 222 2996 : +963 11 222 1125: +963 93 322 6288: +963 94 421 1146: [email protected]: [email protected]: www.team-syr.net

Nepal

Global Air Conditioning And Trading Pvt LtdAddressTelEmail

: SINAMANGAL-9, KATHMANDU-NEPAL: +977 9813388560 : [email protected]

United Arab Emirates UAE

Obaid Humaid Al-Tayer Engineering DivisionAl Tayer GroupAddressTelFaxMobileEmailWebsite

: Dubai – UAE, PO Box 2623: +971 4 2011272: +971 4 2825008: +971 50 3500747 : [email protected]: www.altayer.com

Kingdom of Saudi Arabia KSA

Al-Etmad for Refrigeration and Air Conditioning Industries CompanyAddress

TelFaxMobileEmailWebsite

: Al Qortobah Quartier, King Abdullah Road Riyadh – KSA, P.O. Box 50467 Riyadh 11533: + 966 11 2447789: + 966 11 4958812: + 966 560034240: [email protected]: www.Coolex.com

Republic of Iraq

SWEER Company Limited Address

TelMobileEmailWebsite

: Al Senak -Jumhuria Street - Baghdad-Iraq P.O. Box: 8095: +964 1 8181196: +964 7705 884444 : [email protected]: www.sweerco.com

Kingdom of Bahrain

Y.K. Almoayyed & Sons Address

TelDirectFaxEmailEmailWebsite

: EHAD – Project Department, Sehla Workshop P.O. Box 143, Manama, Kingdom of Bahrain: +973 17 400 444, Extn. 205: +973 17 405 250: +973 17 400 388 : [email protected]: [email protected]: www.almoayyed.com

Sultanate of Oman

Al Noor Projects Engineering & Trading Company Address

TelFaxEmailEmailWebsite

: Third Floor, Oman House P.O. Box: 1047, P.C: 114 Hay Al Mina - Muscat: +968 24709402/403: +968 24709401: [email protected]: [email protected]: www.alnoorprojects.com

www.coolex.com.kw

Documents

GENERAL PRODUCTS BROCHURE - coolex.com.kw · GENERAL PRODUCTS BROCHURE Decorative Mini Split Units. Concealed Ducted Split Series R22/R-407C/R-410A 24-60 MBH CONCEALED DUCTED SPLIT