GENESIS TV GLOBAL USERS MANUAL

GENESIS TV GLOBAL USERS MANUAL

TABLE OF CONTENTSREMOTE CONTROL

BASIC OPERATIONS

NAVIGATING THE ON-SCREEN MENU

SELECTING YOUR ON-SCREEN LANGUAGE

VIDEO MENU OPTIONS

AUDIO MENU OPTIONS

TV MENU OPTIONS

SETUP MENU OPTIONS

PARENTAL MENU OPTIONS

TELEVISION CONNECTIONS

GENESIS + HOSPITALITY TV SPECS

PAGE 2

PAGE 3

PAGE 3

PAGE 4

PAGE 4

PAGE 5

PAGES 5-6

PAGES 6-8

PAGES 8-9

PAGE 10

PAGES 11-12

REMOTE CONTROL

Initiate a Channel Scan

Set time for TV to play before it turns off

Display a channel guide

Toggle audio mute

Toggle power on and offPower

Mute

Display

NICAM

Sleep

Access and select control settings

Scroll menu – Left, Right, Up and Down

Set picture mode

Set sound mode.

Select source for video inputInput

P Mode

S Mode

Enter

Display the main menu on the screen or return to the screen from a menu screen

Select channels by entering numbers

Display the on-screen menu

Scroll up or down the channel numbers

Adjust volume Up or DownVolume +/-

Channel +/-

LCD Menu

DVB Menu

0 - 9

Reveal hidden teletext information

Zoom teletext page to 2X; press again to resume

Pause the current teletext page in multi-page viewing mode.

Show index page

Switch from TV to Teletext modeText

Index

Hold

Reveal

Size

Select a favorite channel

Display current signal source

Electronic program guide

View the next teletext subpageSubpage

EPG

INFO

FAV

Display favorite channel number + 1FAV +

Display favorite channel number - 1FAV-

Select language for teletext pageLANG

Operate corresponding button on the teletext pageTV/Radio

Operate corresponding button on the teletext page

Audio

Operate corresponding button on the teletext page

Freeze

Operate corresponding button on the teletext pageSubtitle

2 THERE’S ONLY ONE™ ELECTRIC MIRROR® | E [email protected] | T +1 425 776-4946 | F +1 425-491-8200 | W www.electricmirror.com

Turning Your TV On 1. Connect the TV to an electrical outlet using the power cable. 2. Press Power on the remote.

Turning Your TV OffWith your TV on, press Power on the remote.

Adjust Your TV VolumePress Volume + / - to adjust the TV volume up or down.Press Mute to turn the sound off. A blue logo displays when the Mute is on.Press Mute to turn the sound back on again.

Selecting a TV ChannelTo scroll up or down the list of channels on your TV, use the Channel + and – buttons.To enter a channel number, use the 0 to 9 buttons.To select a 1 digit channel number (such as channel 5): press the 5 button.To select a 2 digit channel number (such as 20): press the 2 button, then the 0 button.To select a 3 digit channel number (such as 103): press the 1 button, the 0 button, and then the 3 button.

Selecting Your Input SourceTo display a list of input source options, press the Input button on the remote control - input sources toggle in a small window. Choices include AV, S-Video, SCART, VGA, and HDMI.Keep pressing the Input button to scroll through the choices. Press LCD Menu to select and exit the menu.

BASIC OPERATIONS

NAVIGATING THE ON-SCREEN MENU

Press LCD Menu to display the on-screen menu.

Press or to scroll across the list of sub-menus.

Press Enter to access controls for the selected sub-menu.

Press or to scroll the list of settings for the selected control.

Press Enter again to change the control settings.

Press LCD Menu to exit and save your settings.

Note: Commands in the on-screen menu may not match the button labels on your remote. This document shows remote button names in bold text along with the screen commands. LCD Menu [Exit] means that you should press the LCD Menu button to initiate the Exit function.

Use the remote control to navigate the on-screen menu. From here you will set up your TV’s programmable options and settings.

LCD MENU

Enter

REMOTE BUTTONON-SCREEN COMMAND

Enter

Select

Exit

3THERE’S ONLY ONE™ ELECTRIC MIRROR® | E [email protected] | T +1 425 776-4946 | F +1 425-491-8200 | W www.electricmirror.com

Press LCD MENU to display the on-screen menu.

Press or to scroll and select the Setup sub-menu.

Press or to select OSD Language.

Press or to scroll through language options.

When you are satisfied with your settings, press LSD Menu twice to select and exit.

SELECTING YOUR ON-SCREEN LANGUAGE


Press or to scroll and select the Video sub-menu.

Press or to scroll and select the sub-menu controls.

Press or to adjust the control settings.

When you are satisfied with your settings, pressLCD Menu twice to select and exit.

Color Temperature Sub-MenuPress or to select Cool, Standard, Warm, or User.

To adjust colors individually, press Select. Then press or to adjust Red, Green, or Blue gain values.

When you are satisfied with your settings, press LCD Menu twice to select and exit.

VIDEO MENU OPTIONS

Controls the color saturation of your TV image.

Controls the focus of your TV image.

Controls the difference between the darkest and the lightest areas of your

TV image.

Controls the relative lightness and darkest of your TV image.

You can use Preset Modes, or you can customize your own settings by choosing

the User Mode.Picture Mode

Brightness

Contrast

Saturation

Sharpness

Controls visual “noise”that appears in video images.

DNR

Controls the warmness or coolness of the colors in your video image.

Press Enter to view the sub-menu.Color Temperature



Press or to scroll and select the Audio sub-menu.

Press Enter to access the sub-menu.




AUDIO MENU OPTIONS


Press or to scroll and select the TV sub-menu.





TV MENU OPTIONS

Turn surround sound on or off.

Adjust the level of the higher-pitched sounds.

Adjust the level of the lower-pitched sounds.

Adjust the balance between the right and left channels.Balance

Bass

Treble

Sound Surround

Allows the TV to automatically equalize the volume between high and low channels. Select on or off.

Auto Volume Control

Use equalizer presets to make treble and bass adjustments. Choose Standard, Speech, Music or Pop.

Equalizer


Select Channels sub-menu.

Stero, Mono, Dual 1 or Dual 2.

Select Antenna or Cable for your signal input mode.Tuner Mode

Audio Language

Channels

Press or to select a country, then press Enter to begin a scan for channels in the country you selected.

Channel Scan

Highlight Digital Manual Scan, then press Enter. Press or to select RF Channel. Press Enter to begin. Status bars indicate signal level and signal

quality for channels detected during the scan.

Highlight Analog Manual Scan, then press Enter. Press or to select whether you want to scan channels up or down the frequency dial.

Highlight Channel Scan and press Enter. A progress bar shows the status of the scan. You can wait until the scan is complete or you can press LCD Menu to

stop the scan, the channels detected up to that point are saved.Update Scan

Analog Manual Scan

Digital Manual Scan

Advanced channel setting.Channel Sort

Advanced channel setting.Channel Edit

Advanced channel setting.Channel Decode

Advanced channel setting.Analog Channel Fine Tune

Program the TV to skip certain channels. Press or to select the channel you want to skip. Press Enter to select.

Channel Skip

SETUP MENU OPTIONSPress LCD Menu to display the on-screen menu.

Press or to scroll and select the Video sub-menu.






Shows a blue screen whenever there is no signal rather than snow or a black screen.

Set your time zone and on-screen timers.

Set the transparency value for your on-screen display. Select from Low, Middle, and High.

Set the amount of time between the moment you stop using the menu and the moment the menu disappears.

Select the language for your on-screen display.OSD Language

OSD Timeout

OSD Transparency

Blue Mute

Time Setup

Set language and volume options.Subtitle

Set TV to power-off if no input is received from the user. Press or to set timer.

No User Input Timer

Return all screen settings to their factory default. Press or to select. Press Enter to reset.Reset Default

When set to ON, the TV timer will synch automatically. When set to OFF, use number keys to set date and time for synch to occur.

Audio Synch

Set the amount of time that will count down before the TV powers on automatically.

Use or to select a timer that will automatically power the TV on. Choose Once, Off, or On.

Power On Timer

Timer

Power On Channel

Power Off Timer

Timer

Choose Last Status to power the TV on to the last channel used. Choose User Select to select a specific channel number.

Set a timer on or off that will automatically power the TV off.

Use number keys to set the amount of time that will count down before the TV powers off automatically.


Select second choice language for subtitles.

Select first choice language for subtitles.

Off shows no subtitle. On shows subtitles with audio. Mute shows subtitles with no audio.

Analog Subtitle

Subtitle Lang 1

Subtitle Lang 2

Select Normal or Hearing Impaired for your subtitles. Indicates small or larger text.

Subtitle Type

PARENTAL MENU OPTIONSPress LCD Menu to display the on-screen menu.

Press or to scroll and select the Parental sub-menu.

To enter the Parental Menu controls, press LCD Enter. Then use the remote control number buttons to enter the password. The default password is 2020.

Note: You must select the Password field before you enter the password.


When on, TV volume is controlled by the OSD. When off, volume is

Press or to scroll and select Off or ON

Press or to scroll and select TV input sources. Press Enter to display a lock icon next to the source. Signals from these input sources will be blocked.

Press LCD Menu to select.

Press or to select an age rating. Programs rated for children below the age selected here will be blocked. Press LCD Menu to select.

Press or to select a channel. Press Enter to display a lock icon next to the channel. These channels cannot be viewed on the TV.

Press LCD Menu to select.

Channel Block

Program Block

Input Block

Volume OSD

Power On Last Source

Select the signal source that the TV will use when powered on. Power On Select Source

Select the channel that displays when the TV is powered on. On Channel

Press Enter. The screen will display “Are you sure?” Press Select to clear all parental control settings.

Clean All


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

s s s s s s s s s s s s s s s

EM Power Slide (IEC320 C13)

Data Port (Cloning Option)

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Bridgeport (RJ 12)

Configuration Switch (VOD / IPTV Mode Selection)

RS-232 Port (3.5 mm Stereo)

Speaker Outputs S & R (3.5 Mono Each)

HDMI Video & Audio In (HDCP)

SVGA Video In (HD 15)

SCART Connector

S-Video in (S-VHS)

Video in (Composite)

Audio In (Composite, and S-Video RCA Type)

SVGA Audio In (3.5 mm Stereo)

Line Out (3.5 mm Stereo)

RF Television In (European Connector)

TELEVISION CONNECTIONS

16 IR Input (3.5 mm Stereo)


GENESIS + HOSPITALITY TV SPECIFICATIONSGenesis +Hospitality TV puts control in the hands of the hotel. Channel re-mapping, auto volume limiters, and IPTV compatibility make the Genesis Hospitality TV optimal for all hospitality projects.

INTERACTIVE HOSPITALITY LED TVEurope & R.O.W.MODELS IM5-156(E) 156, 190

PRODUCT HIGHLIGHTSHospitality HDTVUltra-slim designIPTV CompatibleLED high bright panelGenesis™ TV platform50,000 hour product lifeEasy installation and removal5-Year Limited Warranty (parts and labor)Ideal amplification to support multiple external speaker options

KEY HOSPITALITY FEATURESIPTV compatibilityBridgePort – RJ-12 Interactive port with IR pass-throughHotel logoChannel re-mappingPower On channel/input selectClone™ box capable+Portal ™ software compatibleAuto volume limitersGuest and master remoteProgrammable protocolDB15 inputIR control

VIDEOHD Ready/FHD – HD16.7 million colorsLED backlight16:9 true widescreen ratio50,000 hour panel life400 cd/m2 brightness


AUDIOSpeaker out (variable) 3.5mm jack8W/channel L/R Stereo OutLine level outL/R Stereo input

OPTIONAL ACCESSORIES+Portal™ softwareClone™ boxBose™ wall mounted SpeakersGlass Waves™ audio technologyMicros™ integrated state-of-the-art mini-speakers for high quality stereo soundHospitality multi-functional wall cover plate

INPUT & OUTPUT CONNECTIONSS-Video (shared audio)HDMI (independent audio)RF inputSCARTComposite (AV) (shared audio)SVGAIR wired remote input

SAFETY/ENVIRONMENTALTested to UL/UL-C 962CE, CCC and international certificationsLED mercury free environmentally sustainable TV back lightingIP44 – Designed for humid bathroom environmentsFCC compliantLow-volt versions

FEATURESCaption (Tele-Text)OSD Language – English, German, French, Spanish, Italian, Portugese)

STANDARD ACCESSORIESWaterproof remoteInstallation manualPower cord

MOUNTINGQuick install and replacement mounting system8mm screws (6)

TUNER/RECEPTIONDVB-T / DVB-C / PAL / SECAM

POWERAC Power Slide – AC 110-120V 60HzDC Power Slide – 12V (20’) with 5V set top box or clock support

NOTICESSome features are dependent upon broadcasting of information by local off-air and cable TV channelsSpecifications are subject to change without noticeHDMI, the HDMI logo, and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLCELECTRIC MIRROR is a registered trademark all rights reserved


THERE’S ONLY ONE™ELECTRIC MIRROR®

[email protected] | 425-776-4946

Documents

GENESIS TV GLOBAL USERS MANUAL