SECTION 308-03A Manual Transaxle/Transmission — MT82 Getrag 6-Speed

CONTENTS PAGE

GENERAL PROCEDURESTransmission Draining and Filling .................................................................................................................................... 308-03A-2

308-03A-i Manual Transaxle/Transmission — MT82 Getrag 6-Speed 308-03A-i

2011 Mustang, 2/2011

GENERAL PROCEDURESTransmission Draining and Filling

Material

Item Specification

Motorcraft® Full Synthetic Manual Transmission FluidXT-M5-QS

WSD-M2C200-C

Item Part Number Description

1 W701065 Drain plug

2 W701065 Fill plug

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.

2. Remove the drain plug and drain the fluid.

3. Install the drain plug.

• Tighten to 35 Nm (26 lb-ft).

4. NOTE: Prior to removal, clean the area around the fill plug.

308-03A-2 Manual Transaxle/Transmission — MT82 Getrag 6-Speed 308-03A-2

2011 Mustang, 2/2011

Remove the fill plug.

5. NOTICE: The use of any other transmission fluid than specified can result in the transmission failing to operate in a normal manner or transmissionfailure.

NOTE: Do not overfill the transmission. This will cause transmission fluid to be forced out of the case.

Using a suitable oil suction gun, fill the transmission with the recommended fluid.

• Transmission capacity is 2.6L (2.7 qt).

6. Install the fill plug.

• Tighten to 35 Nm (26 lb-ft).

308-03A-3 Manual Transaxle/Transmission — MT82 Getrag 6-Speed 308-03A-3GENERAL PROCEDURES (Continued)

2011 Mustang, 2/2011