Upload
albimorkal
View
252
Download
0
Embed Size (px)
Citation preview
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
1/46
Getting Started with Support Centre in
Tally.ERP 9
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
2/46
The information contained in this document represents the current view of Tally Solutions Pvt. Ltd., (Tally in short) on the topicsdiscussed as of the date of publication. Because Tally must respond to changing market conditions, it should not be interpreted to be acommitment on the part of Tally, and Tally cannot guarantee the accuracy of any information presented after the date of publication.
This document is for informational purposes only. TALLY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, IN THISDOCUMENT.
Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in, or introduced into a retrieval system, or transmitted in any form, by any means (electronic,mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Tally Solutions Pvt.Ltd.
Tally may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in thisdocument. Except as expressly provided in any written licence agreement from Tally, the furnishing of this document does not give youany licence to these patents, trademarks, copyrights, or other intellectual property.
2010 Tally Solutions Pvt. Ltd. All rights reserved.
Tally, Tally 9, Tally9, Tally.ERP, Tally.ERP 9, Shoper, Shoper 9, Shoper POS, Shoper HO, Shoper 9 POS, Shoper 9 HO,TallyDeveloper, Tally Developer, Tally.Developer 9, Tally.NET, Tally Development Environment, Tally Extender, Tally Integrator,Tally Integrated Network, Tally Service Partner, TallyAcademy & Power of Simplicity are either registered trademarks or trademarksof Tally Solutions Pvt. Ltd. in India and/or other countries. All other trademarks are properties of their respective owners.
Version : Getting Started with Support Centre in Tally.ERP 9/1.6/January 2010
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
3/46
Contents
i
Contents
Lesson 1: The Support Centre1.1 The Support Centre ............... ................ .............. ............... ................ .............. ................. ............. ... 1
1.1.1 Features of the Support Centre ..................................................................................................................1
1.2 Accessing the Support Centre ............. .............. ............... .............. .............. ................ .............. ....... 21.2.1 Local Access ..............................................................................................................................................21.2.2 Remote Access ........................................................................................................................................... 4
1.3 About the Support Centre ................ ............... .............. ................ ............... ............... ............... ....... 9
1.4 Adding a New Issue/ Query ............... ............. ................ ............... .............. ................ ............... .... 11
1.5 Reply to an Issue/ Query ................ ................. .............. ............... ............... .............. ............... ....... 16
1.6 Close an Issue/ Query ..................................................................................................................... 19
1.7 Other Functions .............. ............... ............... ................ .............. ............... ................ ............... ....... 201.7.1 Detailed/ Condensed ................................................................................................................................201.7.2 Period ......................................................................................................................................................231.7.3 Group by ..................................................................................................................................................231.7.4 List/ Thread View .....................................................................................................................................27 1.7.5 Zoom In/ Zoom Out List ...........................................................................................................................301.7.6 Zoom In Content/ Zoom Out Content ......................................................................................................311.7.7 Site Filter .................................................................................................................................................351.7.8 Status Filter .............................................................................................................................................37 1.7.9 Page Size ..................................................................................................................................................401.7.10 F12: Configure .....................................................................................................................................41
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
4/46
1
Lesson 1: The Support Centre
1.1 The Support CentreTally.ERP 9 provides a new capability known as the Support Centre, wherein you can directly postyour queries on the functional and technical aspects of the Product.The user can view all the support queries in different modes, i.e., routed via the Support Centre,Email, Calls, etc.The Support Centre allows you to view queries for an activated license along with the Status i.e.,Closed/ Pending and Ticket Summary. The report is viewed on the basis of the Date, Status andLocation.
1.1.1 Features of the Support Centre
Quick help and support
The Support Centre makes it easy and convenient to reach out to the system, which includes TallySupport and the Tally Service Partner, to offer help and support on any product, at the click of a
button.Access solutions to your problems any time
This feature facilitates instant reference to the solutions provided for your queries at any point of time.Avoid repeated explanations
The availability of information on issues, interactions and resolutions, to the entire Tally SupportTeam, including the Tally Service Partners dramatically reduces the need for repeated explana-tions on issues/support queries and thereby ensures quality help and support.Track your issues on a real-time basis
The Support Centre enables you to track the status of your queries including the full chain of inter-actions irrespective of the mode of communication. If you have posted a query from the Support
Centre within Tally. ERP 9 and then interacted over the phone, you will be able to see both theinteractions.Access issues of any Location/Site
In case of a Multi-site License, you can view the details pertaining to issues of any location /sitefrom any of your sites.Reach out to your nearest Service Partner instantly
You can search for a service partner and post your queries instantly.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
5/46
The Support Centre
2
Access your Support Centre remotely from any Tally.ERP 9
As an authorized Tally.NET user, the Support Centre feature can be accessed remotely from anymachine having Tally.ERP 9 installed on it and activated or in educational mode.
1.2 Accessing the Support CentreSupport Centre can be accessed locally from your machine as well as remotely from anyTally.ERP 9 from anywhere. You can access Support Centre from any other machine whereTally.ERP 9 has been installed and activated or is in the Educational mode.
1.2.1 Local Access
To access the Support Centre locally:Start Tally.ERP 9
From the Company Info Menu or Gateway of Tally , click on H: Support Centre providedin the buttons toolbar, or press Ctrl + H using the Keyboard.
Figure 1.1 Company Info Menu
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
6/46
The Support Centre
3
The Support Centre screen is displayed as shown.
Figure 1.2 Support Centre Screen
To Exit the Support Centre , press Esc or press Ctrl + Q .
In case you have logged in to the Support Centre from the Gateway of Tally , i.e., after having selected a company using your User Name and Password, the Support Centre will display the User name on the topright of the screen, as shown in the image.
In case you have logged in to the Support Centre from the Company Info menu, the User name will not be displayed in the top right part of the screen.
Issues posted on the current date are in Blue .
The Support Centre for a newly activated Tally.ERP 9 licenses will dis- play a blank screen.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
7/46
The Support Centre
4
1.2.2 Remote Access
In case you wish to access your Support Centre remotely from any other machine where the
Tally.ERP 9 license has been installed and activated or is in the Educational mode, you can usethe Login option for the same.
To login remotely follow the steps shown:Go to Company Info or Gateway of Tally > Support Centre
Click on L: Login button provided in the buttons toolbar, or press Alt + L from the SupportCentre screen.The Login As Remote Tally.NET User screen appears:
Figure 1.3 Login as Remote Tally.NET User
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
8/46
The Support Centre
5
Enter your E-mail ID in the field provided.Enter your Tally.NET Password in the field provided.
Figure 1.4 Login your E-Mail ID and Password
Press Enter The Select Account option along with the list of User Accounts appears when the E-mailID provided is linked to a Single or Multiple Accounts. Select the required User Accountand press Enter .
Figure 1.5 Select Account option
To post an issue or a query related to Shoper 9 or Tally Developer you need to login remotely using valid E-Mail ID of the respective product. The issue/ query posted will be routed to the respective support desk.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
9/46
The Support Centre
6
The Support Centre of your account will be displayed as shown.
Figure 1.6 Support Centre remotely logged in
Click on L: Logout or press Alt + L if you wish to logout from the Support Centre.
The selected Account ID will be displayed on the top left hand corner of the screen and your User ID will be displayed in the top right hand corner of the screen.
Using Alt + L , you can toggle between Login / Logout .
In case you forget the Tally.NET Password, click on F5: Reset Password or press F5 . The new password will be sent to your E-mail address.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
10/46
The Support Centre
7
Select Account [Alt + S]
In case, your ID (user name) is linked to multiple accounts, using this option, you can select therequired account from the list of User Accounts .To Select the account:From the remotely logged in Support Centre screen:
Click on S: Select Account provided in the buttons toolbar, or press Alt + S , from theSupport Centre screen.The Select Account option along with the list of User Accounts pops up onscreen whenyour E-mail ID is linked to a Single or Multiple Accounts.
Figure 1.7 Select Account
Select the required User Account.
Figure 1.8 Select Account
Press Enter to view the selected User Account.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
11/46
The Support Centre
8
The Support Centre of the selected User Account is displayed, as shown.
Figure 1.9 Support Centre using Select Account
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
12/46
The Support Centre
9
1.3 About the Support CentreGo to Company Info menu or Gateway of Tally > Support Centre [Ctrl + H]
By default, the Support Centre screen lists queries raised by you in the last 7 days , as shown:
Figure 1.10 Support Centre Screen
The Support Centre screen displays the following information:
Query List: The default setting of the page size to list the queries is 10. Click There are 10 rowsmore, show next 10 rows to view the next 10 queries. Once the next 10 queries are displayed,the option 10 more, show previous 10 rows is displayed on top.
Issues posted on the current date are in Blue .
Click on R: Refresh button or press Ctrl + R to refresh the query list, asrequired.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
13/46
The Support Centre
10
Ticket Summary: The Ticket Summary column displays the following:The Ticket number.
The Account ID of the user.The Reported On date.The Current Owner of the query.The Current Status (Pending/ Closed).The Ticket Interactions will display the subject of the query.
The second part of the Ticket Summary displays the following:The Date of the query.The Subject of the query.The query received From name.
The query sent To name.The Description of the query.
To display a magnified view of the Ticket Summary click zoom in content, to display. To view the query/ issue horizontally:
Highlight the required query/ issue from the list of queries and press Enter .
Figure 1.11 Zoom in Mode
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
14/46
The Support Centre
11
Click B: Go to Browser to browse the Ticket View in detail.
1.4 Adding a New Issue/ QueryYou can post your query for any support required on the functional and technical aspects of theProduct.To add a New Issue/ Query:Go to Company Info menu or Gateway of Tally > Support Centre
Click N: New Issue or press Alt + N from the Support Centre.The form entitled Post Your Support Query is displayed as shown. In the fields providedfill in the required details.
Figure 1.12 Post Your Support Query form
A topic on Browse Issue is discussed separately
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
15/46
The Support Centre
12
Send to: Select a New Service Partner or Tally Solutions Pvt Ltd. in this field. TheService Partner could be one from whom you have procured the Tally.ERP 9 or with whomyou have entered into a service contract.
You can send the queries to:New Service Partner : The recipient of your query/issue will be a Service Partner Tally Solutions Pvt Ltd : The recipient of your query/issue will be Tally Support (Customer Centre).
Select the New Service Partner from Send your query toThe Partner Search screen appears, you can search for a service partner based on the partnersLocation or Name .
Figure 1.13 Partner Search
To search for a service partner based on the Location :In Search by field, select the Location from the list of Searching MethodsIn the Location field, enter the name of the location and press Enter
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
16/46
The Support Centre
13
The New Partner Details screen appears displaying the Name of the Partner along withthe Distance
Figure 1.14 Partner list by Location
Select the required Partner and press Enter
To search for a service partner by Name :In the Search by field, select Name from the list of Searching MethodsIn the Name Containing field, enter the name of the service partner and press Enter
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
17/46
The Support Centre
14
The New Partner Details screen appears displaying the Name of the Partner
Figure 1.15 Partner list by Name
Select the required Partner and press Enter
In case, you have selected Tally Solutions Pvt. Ltd. under Send to, the Post Your SupportQuery form will be displayed as shown:
Figure 1.16 Post Your Query form
Press Alt + F1 or click on F1: Detailed button to view the contact details of the partners.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
18/46
The Support Centre
15
Subject: Type the subject of query raised and press Enter or click A: Accept , to go to thenext field.Description: Type the query description and press Enter or click A: Accept .
Figure 1.17 Post Your Support Query confirmation screen
Send the query by pressing Accept? Yes or No
In case of Remote Login , the Send to will also display the Email address of the account to which you have logged in, in the Send your query to list.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
19/46
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
20/46
The Support Centre
17
Select the query that needs to be replied/ forwardedClick on R: Reply provided in the buttons toolbar, or press Alt + R using the Keyboard,from the Support Centre screen.The Post Your Response window is displayed as shown.
Figure 1.19 Post Your Response Form
Description : Type the query description to post your response, in the field provided.
Send the query by pressing Accept? Yes or No
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
21/46
The Support Centre
18
The Reply mail will be updated in the Support Centre query list , as shown.
Figure 1.20 Updated Query List
You can view the reply along with the query, as it is linked to the ticket number of the query raised.This can be viewed by selecting the subject under Ticket Interactions in the main screen of Support Centre, and also through the options Thread View , Zoom in Content or Go to Browser.
The ticket number of the query/ issue to which a reply has been posted,will automatically be displayed on top of the form, as shown in the image.
When the Reply button is pressed, the cursor will blink at the Descrip- tion field automatically in the Post Your Response form.
The Send to and Subject fields will automatically be pre-filled with therecipient address and the subject, respectively. You may change the
same by pressing back-space if required.You may also select the required Subject under Ticket Interactionsavailable in the Zoom Out Content mode (default query list) or in theZoom in Content mode and press Enter , to Reply .
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
22/46
The Support Centre
19
1.6 Close an Issue/ Query
You can Close the issues once the response to a query is received from the Customer Centre of Tally or a Service Partner, or if the issue has been resolved. You can also close any of thePending Issues, if you wish to.
To close an Issue:Go to Company Info menu or Gateway of Tally > Support Centre
Select the Pending query that needs to be closed.
Figure 1.21 Selecting an issue row to Close
Click on C: Close provided in the buttons toolbar, or press Alt + C from the Support Centrescreen.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
23/46
The Support Centre
20
The Status of the query will change to Closed , as shown:
Figure 1.22 Issue Closed
1.7 Other FunctionsGo to Company Info menu or Gateway of Tally > Support Centre
1.7.1 Detailed/ Condensed
Go to Company Info menu or Gateway of Tally > Support Centre > F1: Detailed/ Condensed
You can opt to view the queries in Detailed or Condensed mode. This button will be active onlywhen you opt to view the list Status wise or Site wise (F3: Group by > Status/ Site).
The Close button in the buttons toolbar will be active only for thePending issues.
You need to change the Status of an interaction for a query to Close, if you are satisfied with the response received.
When an issue with Status as Pending is closed , the other issues whichare linked to the same ticket number also get closed automatically.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
24/46
The Support Centre
21
The Detailed Status wise report displays a list of queries based on the Status (All/ Pending/Closed) opted, as shown:
Figure 1.23 Status wise Detailed list view
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
25/46
The Support Centre
22
The Condensed Status wise report displays only the count of queries based on the Status (All/Pending/ Closed) opted, as shown:
Figure 1.24 Status wise Condensed view
You can use the F1 button to toggle between Detailed / Condensed .
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
26/46
The Support Centre
23
1.7.2 Period
Go to Company Info menu or Gateway of Tally > Support Centre > F2: Period
You can opt to view the query list for a particular period. By default, the query listing is set to thelast 7 days. To change the period, press the button F2: Period provided in the buttons toolbar, or press F2 from the Support Centre screen.You may type the number of Days/ Weeks/ Months/ Years in the Default Period field provided.For instance: 15 Days, 1 Month, 2 Months and so on.
Figure 1.25 Selecting Period
1.7.3 Group by
Go to Company Info menu or Gateway of Tally > Support Centre > F3: Group by
This option allows you to view the query list based on the Groups. The options available under Group by are Date , Site and Status wise. You can set the Default Grouping using this option.
Click on F3: Group by provided at the buttons toolbar or press the function key F3 , toselect the Group by option.
Figure 1.26 Group by option
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
27/46
The Support Centre
24
Group by Date
This option allows you to view the list of queries on the basis of the Date .
Figure 1.27 Date wise Query list
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
28/46
The Support Centre
25
Group by Site
This option allows you to view the query list on the basis of the Site/ Location , i.e., the issuessent and received at different Sites belonging to the same or different Serial Numbers, under asingle account.
Figure 1.28 Site wise Detailed Query list
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
29/46
The Support Centre
26
Click F1: Condensed to display the Site wise query list in Condensed mode as shown:
Figure 1.29 Site wise Condensed Query list
The option Site located under Default Grouping will not be listed for SingleSite users.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
30/46
The Support Centre
27
Group by Status
This option allows you to view the query list based on the Status .
Figure 1.30 Status wise Query List
The query list can further be viewed on the basis of the Status selected using the F9: StatusFilter option.
1.7.4 List/ Thread View
Go to Company Info menu or Gateway of Tally > Support Centre > F4: Thread View/ ListView
The Support queries can be viewed, either in the List View mode or in the Thread View mode.Click F4: Thread View/ List View or press F4 .
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
31/46
The Support Centre
28
List View
To displays the queries individually in a detailed mode, as shown:
Figure 1.31 Queries in List View mode
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
32/46
The Support Centre
29
Thread View
Thread View displays the query and response based on the options selected in the Group byscreen.
Figure 1.32 Queries in Thread View mode
Say, for instance, a Tally Expert, replies to a new query raised by you and you continue the inter-action by further replying to the response. In such cases, you will be able to see the entire chain of the interaction along with the links between each query, as shown in the image. In other words,the queries linked to the same ticket number can be viewed in the Thread View mode.
You can use the F4 button to toggle between T hread View / List View .
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
33/46
The Support Centre
30
1.7.5 Zoom In/ Zoom Out List
Go to Company Info menu or Gateway of Tally > Support Centre > Z: Zoom In List/ Zoom Out
List [Alt + Z]
This option allows you view the query list with other column details, in an enlarged mode.
Zoom In List
To view in an enlarged mode:Press the button Z: Zoom in list provided in the buttons toolbar or press Alt + Z . TheSupport Centre screen is displayed as shown:
Figure 1.33 Query list in Zoom in List mode
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
34/46
The Support Centre
31
Zoom Out List
Click Z: Zoom out list or press Alt + Z to display the support centre screen as shown:
Figure 1.34 Query list is Zoom out list mode
1.7.6 Zoom In Content/ Zoom Out Content
Go to Company Info menu or Gateway of Tally > Support Centre > Z: Zoom In Content/Zoom Out Content [Ctrl + Z]
This option allows you to view the selected query in an enlarged mode.
Using Z (Alt + Z), you can toggle between Zoom in list / Zoom out list .
You will not be allowed to view the query in Zoom in list mode when youare in the Zoom in content mode.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
35/46
The Support Centre
32
Zoom In Content
To view the content in an enlarged mode:
Click Z: Zoom in content provided in the buttons toolbar or press Ctrl + Z . The screen isdisplayed as shown:
Figure 1.35 Query in Zoom In Content view mode
In case you have zoomed in by selecting an issue row from a List View , you may view the other issue(s) linked to the same ticket number under Ticket Interactions , by selecting the appropriatesubject(s).
In case you have zoomed in by selecting an issue row from a Thread View , you will be able toview the interactions pertaining to that particular issue only.
Go to Browser [Alt + B]
Inorder to view more details with regard to Ticket Summary , Interactions and Interactiondetails such as Content, Properties, etc., the Browse mode can be used.The Browse mode displays all the additional information that is not provided in the Zoom InContent option, such as Reported by , Issue type , Priority , Product , Product Serial No.,Status, etc., placed under Ticket Summary .Similarly, the content area in the Support Centre screen is limited to the display of specifiedcontents, since the contents cannot be displayed if they exceed the limit. In such cases, theBrowse Issue mode will help you in viewing the entire content of an issue.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
36/46
The Support Centre
33
The Browse Issue mode will also help you to view the Properties of the selected issue, under Interaction details .
To get into Browse mode, click on the button B: Go to Browser provided in the buttonstoolbar or press Alt + B .
The Ticket View window of query/ issue is displayed, as shown:
Figure 1.36 Query in Browser mode
The B: Go to Browser button in the buttons toolbar will be active only whenthe query is viewed in the Zoom in Content mode.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
37/46
The Support Centre
34
Zoom Out Content
This option takes you from the Zoom in Content mode to the default view mode.
Click Z: Zoom out content or press Ctrl + Z the Support Centre screen appears
Figure 1.37 Query in Zoom Out Content view mode
You can use Z (Ctrl + Z) to toggle between Zoom in content and Zoomout content .
You will not be allowed to view the query in Zoom in content mode whenthe Zoom in list mode is being used.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
38/46
The Support Centre
35
1.7.7 Site Filter
Go to Company Info menu or Gateway of Tally > Support Centre > F8: Site Filter
You can opt to view the query list based on the Sites (i.e., All , the Primary and Other Sites ) incase of Multi Site licensing for any Group by list selected.Click on the F8: Status Filter provided in the buttons toolbar or press F8 , to select the Sitefrom the list.
Figure 1.38 Site Filter Option
Site Filter - All
Select the option All under Site to display all the queries/ issues, of all the Sites/ Locationsbased on the Group by option selected.
Figure 1.39 Query list of All Sites
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
39/46
The Support Centre
36
Site Filter - Site (Selecting a Site from the list)
Select a Site , say Bangalore RO from the list of Sites to display the query list pertaining to
the selected Site, as shown:
Figure 1.40 Query list of a Selected Site
The F8: Site Filter option will be available only in case of Multi Sitelicensing.
In case you have selected a Site, from the list of sites by pressing F8: Site Filter, the query list will display the Site ID on top left (below the
Account ID) in the Support Centre screen, as shown.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
40/46
The Support Centre
37
1.7.8 Status Filter
Go to Company Info menu or Gateway of Tally > Support Centre > F9: Status Filter
You can opt to view the query list based on the Status , namely, All , Closed and Pending , for anyGroup by option selected.Click on the button F9: Status Filter provided on the buttons toolbar or press the functionkey F9 , to select the Default Status .
Figure 1.41 Status Filter Option
Status Filter - All
Select the option All from Default Status to display all the Pending and Closed queries/issues.
Figure 1.42 Query list displaying All Status
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
41/46
The Support Centre
38
Status Filter - Pending
Select the option Pending from the Default Status to display only the Pending queries/
issues.
Figure 1.43 Query list Status filtered to view Pending issues
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
42/46
The Support Centre
39
Status Filter - Closed
Select the option Closed from the Default Status to display only the Closed queries/
issues.
Figure 1.44 Query list displaying Closed issues
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
43/46
The Support Centre
40
1.7.9 Page Size
Go to Company Info menu or Gateway of Tally > Support Centre > F10: Page Size (10)
This option allows you to list the number of queries in one page on the basis of the settings done.The default Page Size is set to display 10 items in a page.
To set the number of queries in a list:Click on the button F10: Page Size (10) provided at the buttons toolbar or press thefunction key F10 .
Figure 1.45 Configure Page size
Type the required number of queries to be listed and press Enter .The Support Centre screen displays the number of queries according to the settings made,as shown:
Figure 1.46 Query list with Page size set to 15 rows
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
44/46
The Support Centre
41
1.7.10 F12 : Configure
Go to Company Info menu or Gateway of Tally > Support Centre > F12: Configure
The configuration setting options available under F12 Configure are alsoavailable in the buttons toolbar such as, F1: Detailed/ Condensed , F2:Period , F3: Group by, F9: Status Filter , F4: Thread/ List View and F10 Page Size .
You can use this option to set the configuration according to your requirement.
Figure 1.47 F :12 Configure of Support Centre
Default Period
You can re-set the default Period to display the queries as per your requirement. Select Last 15Days from the Default Period list to display the queries listed for the past 15 days. Similarly, youcan also choose other options from the Default Period list to display the queries for the respectiveperiod.
The Page Size can be set to display between 10 and 100 .
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
45/46
The Support Centre
42
Default Grouping
This option allows you to view the list of queries based on the Grouping options selected.
Default Grouping - Date
In cases where Date is selected from the Default Grouping list, the queries are displayed in achronological order (Date wise).
Default Grouping - Site
In cases where the Site option is selected from the Default Grouping list, the queries aredisplayed Site / Location wise.
Default Grouping - Status
In cases where the Status is selected from the Default Grouping list, the queries are displayedon the basis of the Status (All / Pending / Closed).
Default StatusThis option allows you to set the default Status, i.e., All, Closed or Pending, for any Group byoption selected.
Default View
You can opt to view the list of queries either in a List View or in a Thread View mode.
Default View - List
In cases where the option List View is selected, the query list can be viewed in List View mode.
Default View - Thread
In cases where the option Thread View is selected, the query list can be viewed in Thread Viewmode.
Default View Mode
You can opt to view the list of queries in either a Detailed or Condensed mode.
The option Site under Default Grouping will not be listed for Single Siteusers.
7/31/2019 Getting Started With Support Centre | Tally Downloads | Tally AMC | Tally
46/46
The Support Centre
Default View Mode - Detailed
The Detailed View Mode displays the list of queries in Detail based on the Status (All/ Pending/Closed) selected.
Default View Mode - Condensed
The Condensed View Mode displays only the counts of queries based on the Status (All/Pending/ Closed) selected.
Default Page Size
This option allows you to define the number of queries/ issues to be listed in the Support Centrescreen, for instance: 15, 20, 25, and so on.
The default Page Size is 10 . i.e., the Support Centre screen displays 10 queries in a screen at atime. The next set of 10 queries can be viewed by clicking on ' X rows more, show next x rows ' available below the list.
The Default View Mode option will be disabled in case Date is selected under Default Grouping option.
The Page Size can be set to display between 10 and 100 rows.