Giving You The Power - Brewer Equipment Companybrewerequipmentco.com/uploads/Senco Full Tool Catalog1.pdf · No Hoses, No Compressors, No Hassles. Introducing SENCO’s Cordless Gas

Tool Catalog

Giving You The Power with the Right Tools in Mind

tom

Typewritten Text

SENCO: We Take Pride in Your Work

For nearly 60 years, the SENCO brand has been synonymous with professional results, productivity increases and pride in a job well done.

Customers around the world have put SENCO’s innovative products to work in a variety of wood to wood fastening applications, counting on them to perform every day.

Today, as a member of Senco Brands, Inc. portfolio, SENCO continues to pioneer new technologies – in both tool and fastener development – as the unique needs of its customers continue to evolve.

Senco Brands, Inc. is responsible for developing some of the best known brands in the construction industry. In addition to SEN-CO, this includes DuraSpin ( wood to wood auto collated screw systems) and TyRex (concrete and steel fastening). Each delivers high-quality products capable of performing to the strict standards their customers – and the construction industry – demand. In markets around the world, regardless of the type of construction or industrial environment, SENCO customers can buy, and build with confidence.

SENCO, a leader in the power fastening industry, continues to lead the way in innovative technology – pioneering the fastening industry today and tomorrow.

technology

Fusion Pneumatic Power. Cordless Portability.

combining the best of pneumatic and cordless technology, Senco’s Fusion tools take power fastening technology to the next level. Available in 15 and 18-gauge models, Fusion finish nailers provide professionals with pneumatic power and dependability while offering cordless portability – minus many of the drawbacks typically associated with those types of tools.

Powered by an 18v lithium Ion Phosphate battery, Fusion technology has eliminated the fuel replacement costs and “ramp-up” time found on traditional cordless products. A fully charged battery delivers 500-600 drives – plus its “quick charge” capability enables you to reduce on-the-job downtime by reaching 85% capacity in just 15 minutes.

Ideal for finish, trim and cabinet work, Fusion’s Fn65DA drives 15-gauge finish nails from 1 ¼"-2 ½", while the Fn55AX 18-gauge version handles 5/8"-2" fasteners. In addition, both weigh nearly 2 lbs. less than the competition and offer superb line of sight for accurate fastener placement.

the nextgeneration

3

the nextgeneration

1

2

7

4

5

9

8

technology

3

6

Energy is stored as compressed nitrogen gas

Trigger is pulled and energy is released

Motor turns lifter which resets piston

How

doe

s Fu

sion

wor

k?

how it works

1 Patented Reflex-Shot Design

2 Robust Aluminum Drive cylinder

3 eco-Friendly 18v li-ion Battery with leD charge Indicator

4 Adjustable Belt hook

5 Drive control Switch

6 thumbwheel Depth of Drivewith Depth gauge

7 nose Mounted leD Work light

8 Innovative eZ-clear Feature

9 Rugged Aluminum Magazine

15 Ga. 2½" Cordless 34˚ Angled Finish Nailer

NEW Fusion FN65DA The FN65DA, featuring Fusion Technology, has the power and utility of a pneumatic tool combined with the convenience of a cordless tool. Our patented Reflex-Shot design provides an instant shot when the trigger is pulled with no ramp-up time. Save up to $300 a year by not having to buy any fuel cells!

ApplicationsFinish and Trim, Baseboard, Cabinets, Caskets, Chair Rail, Decorative Trim, Door & Window Casing, Furniture Trim, Paneling

Features• PatentedReflex-ShotDesign• RobustAluminumDriveCylinder• RuggedAluminumMagazine• Eco-FriendlyEnergy-18vLi-ionBattery• SelectableDriveSwitch• NoseMountedLEDLight• AdjustableBeltHook• ThumbwheelDepth-of-Drive• InnovativeEZ-ClearFeature• Includescase&charger• 2-yearlimitedwarranty

SpecificationsItem#:5N0001N,SelectableactuationtriggerToolWeight:6.2lbs(2.81kg)Height:13.5"(343mm)Length:13"(330mm)Width:3"(76mm)Battery:OneLi-ion18vCharger:80%in15minutes,100%in45Minutes

FastenerCapacity:110Gauge:15Range:1¼"–2½"Collation:34˚angledtapedstrip

DA.069

_1¼

__2½

Forfastenersseep.40SeriesDA

Pneumatic Power. Cordless Portability. 15 gauge finish and 18 gauge brad 18v Li-ion powered nailers featuring Fusion Technology, has the power and utility of a pneumatic tool combined with the convenience of a cordless tool.

18 Ga. 21⁄8" Cordless Brad NailerApplicationsMoldinganddecorativetrim,furnituretrim,windowbeading,blindpinningofupholsteredandtrimpanels,rattan,scribemolding,cabinets,drawersandpictureframeassembly.

Features• PatentedReflex-ShotDesign• RobustAluminumDriveCylinder• RuggedAluminumMagazine• Eco-FriendlyEnergy-18vLi-ionBattery• SelectableDriveSwitch• NoseMountedLEDLight• AdjustableBeltHook• ThumbwheelDepth-of-Drive• InnovativeEZ-ClearFeature• Includescase&charger• 2-yearlimitedwarranty

SpecificationsItem#:6E0001N,SelectanleactuationtriggerToolWeight:6lbs(2.72kg)Height:13"(330mm)Length:11"(276mm)Width:3"(76mm)Battery:OneLi-ion18vCharger:80%in15minutes,100%in45Minutes

FastenerCapacity:110Gauge:18Range:5⁄8"–21⁄8"Collation:Straightgluedstrip

NEW Fusion FN55AX The FN65DA, featuring Fusion Technology, drives both slight and medium headed brads into the hardest woods. Perfect for trim crews, remodelers, punch-out, or anyone who does not want to deal with the hassle of a hose and compressor. Save up to $300 a year by not having to buy any fuel cells! Forfastenersseep.42SeriesAY&AX

AX

__21⁄8

__5⁄8 __5⁄8

AY

__1

4

CORDLESS FINISH & TRIM WITH FUSION TECHNOLGy

15 Ga. 2½" Cordless Gas 34˚ Angled Finish Nailer

NEW GT65DA The GT65DA combines power and utility in a well balanced tool. Built with components that ensure all-day durability and reliability, the GT65DA comes with a Ni-MH battery, battery charger, durable case, service tools, and features a 2-year limited warranty.

ApplicationsFinish and Trim, Baseboard, Cabinets, Caskets, Chair Rail, Decorative Trim, Furniture Trim, Paneling, Door & Window CasingFeatures• Cordlessconvenience–Nohoses,nocompressors,nohassles.

• Powerfulmotor–High-voltageignitiongivesyoumorepowerandcleanercombustion

• Metalmagazineforincreaseddurabilityt• BeltHook• ThumbwheelDepth-of-Drive• EZ-ClearFeature• Includescase,Ni-MHbattery&charger• 2-yearlimitedwarranty

SpecificationsItem#:5R0001N,SequentialactuationtriggerToolWeight:5.2lbs(2.36kg)Height:14.2"(362mm)Length:12.5"(318mm)Width:3.6"(91mm)Battery:Ni-MH6vCharger:100%in2hoursFuelCell:SENCO18gorothercompatiblefuel


DA.069

_1¼

__2½


No Hoses, No Compressors, No Hassles. Introducing SENCO’s Cordless Gas Finish and Brad nailers. Navigate the job site with no restrictions. Powerful motor & high-voltage ignition gives you more power and cleaner combustion.

16 Ga. 2½" Cordless Gas 20˚ Angled Brad NailerApplicationsFinish and Trim, Baseboard, Cabinets, Caskets, Chair Rail, Decorative Trim, Furniture Trim, Paneling, Door & Window Casing

Features• Cordlessconvenience• Powerfulmotor–High-voltageignitiongivesyoumorepowerandcleanercombustion

• Consistentdrivesinallweatherconditions• Metalmagazineforincreaseddurability• BeltHook• ThumbwheelDepth-of-Drive• EZ-ClearFeature• Includescase,Ni-MHbattery&charger• 2-yearlimitedwarranty

SpecificationsItem#:5S0001N,SequentialactuationtriggerToolWeight:4.9lbs(2.22kg)Height:12"(305mm)Length:12.5"(318mm)Width:3.6"(91mm)Battery:6vNi-MHCharger:100%in2hours

FastenerCapacity:110Gauge:16Range:1¼"–2½"Collation:20˚angledgluedstrip

NEW GT65RHA The GT65RHA is perfect for trim crews, remodelers, punch-out work and anyone wanting the freedom of a cordless tool. Built with components that ensure all-day durability and reliability. Comes with a Ni-MH battery, battery charger, durable case, servicetools, and features a 2-year limited warranty. Forfastenersseep.41SeriesRH

.055

__1¼

__ 2½

GAS TOOL ACCESSORIES

Tool cleaning is recommended after driving 10,000 nails or after 9 spent fuel cells.

PC1210

VA0057VB0108

VB0114PC1209PC1191

Battery Systems (Qty1)

Battery:6vNiMH VB0108

Charger:2hr VA0057

PowerSupplyAdapter VB0114forVA0057Charger

5

CORDLESS GAS FINISH & TRIM

Cleaning Kit CleanTools (Qty1)

KitIncludes:toolcleaner, GT90CH PC1170lubricatingoil,O-ring, GT90FRHairfilterelement,fuelstem GT65DA PC1244andinstructions GT65RHA

Liquefied Gas Fuel (Qty12)FRAMING:Cell40g/80mlBoxodsix2cellblisterpacks PC1209FINISH:Cell18g/35mlBoxofsix2cellblisterpacks PC1210

15 Ga. 2½" 34˚ Angled Finish Nailer

FinishPro®42XP The FinishPro® 42XP has established itself as the marquee tool for professional finish carpenters. The FinishPro 42XP has great durability and superior performance.

Whether it's finish & trim, cabinets, furniture, hardwood flooring, trim to steel studs, baseboards, upholstery trim panels to door or window casings, we have the finish tool for you. SENCO offers a wide selection of 15 through 23 gauge finish nailers.

15 Ga. 2" 34˚ Angled Finish Nailer


ApplicationsBaseboards, cabinets, case goods, caskets, chair rails, decorative trim, door & window casing, sash &millwork,exteriortrim,finishapplications/trim,furnitureandpaneling.

Features• Lightweight–3.6lbs.• NeverLube®design• Belthook–attachedtoeitherside• Adjustabledepth-of-drive• EZ-Clear™latch• Adjustableexhaustforusercomfort• Ergonomicallydesignedcomfortgriphandle• No-Marpad–toprotectworksurfaces• Includescase• 1-yearlimitedwarranty

SpecificationsItem#:620002NSequentialactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):2.16scfmAirInlet:¼"NPTToolWeight:3.6lbs(1.6kg)Height:9.62"(244mm)Length:12"(305mm)Width:3.25"(82.5mm)

FastenerCapacity:104Gauge:15Range:1"–2"Collation:34˚angledtapedstrip

DA.069

_1

__2

SFN30 Perfect for construction, furniture, cabinets and picture frames, it is one of the lightest 15 gauge tools around.

6

ApplicationsBaseboards, cabinets, case goods, caskets, chair rails, decorative trim, door & window casing, sash &millwork,exteriortrim,finishapplications/trim,furnitureandpaneling.

Features• Ruggedinternalenginedesign• NeverLube®design• Magnesiummainbody-lightweight• Adjustabledepth-of-drive• EZ-Clear™latch• 360˚adjustableexhaust• ComfortgripandBelthook• No-Marpad• Includescase• 5-yearlimitedwarranty

SpecificationsItem#:4G0001NSequentialactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):3.87scfmAirInlet:1/4"NPTToolWeight:4.7lbs(2.1kg)Height:11.25"(286mm)Length:13"(330mm)Width:3.5"(89mm)


DA.069

_1¼

__2½


FINISH & TRIM

7

16 Ga. 2½" Finish Nailer

16 Ga. 2½" 20˚ Angled Finish Nailer

Forfastenersseep.41SeriesMOO

Forfastenersseep.41SeriesRH

ApplicationsBaseboards, cabinets, case goods, chair rail, crown molding, decorative trim, door & window casing, sashandmillwork,bookshelvesandexteriorandinteriortrim.

Features• Magnesiummainbody-durable&ultra-light• Adjustabledepth-of-drive• EZ-Clear™latch• 360˚adjustableexhaust• Comfortgrip• Belthook• No-Marpad• Includescase• 1-yearlimitedwarranty

ApplicationsFinish and Trim, Baseboard, Cabinets, Caskets, Chair Rail, Decorative Trim, Door & Window Casing, Furniture Trim and PanelingFeatures• Magnesiummainbody-durable&ultra-light• Oil-freemotoreliminatesoilcarryoverontotheworksurface

• Selectabletriggerletsyoucontrolthefasteningmethodwiththeflipofaswitch

• Adjustabledepth-of-drive• EZ-Clear™latch• Rotatableexhaustandbelthookkeepsdustanddebrisofftheworksurfacewhilekeepingyourtoolattheready

• Includescase,swivelplugandwrench• 1-yearlimitedwarranty

SpecificationsItem#:1X0201NSequentialactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):2.16scfmAirInlet:¼"NPTToolWeight:4.2lbs(1.9kg)Height:10.88"(276mm)Length:12.16"(307mm)Width:3"(76mm)

FastenerCapacity:110Gauge:16Range:1¼"–2½"Collation:Straightgluedstrip

SpecificationsItem#:6F0001NSelectableactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):2.16scfmAirInlet:¼"NPTToolWeight:3.83lbs(1.74kg)Height:11.5"(91mm)Length:12"(305mm)Width:3"(76mm)

FastenerCapacity:110Gauge:16Range:1¼"–2½"Collation:20˚angledstrip

18 Ga. 21⁄8" Brad Nailer

Forfastenersseep.42SeriesAY&AX

ApplicationsDecorativetrim,furnituretrim,windowbeading,blindpinningofupholsteredandtrimpanels,rattan,scribemolding,cabinets,drawersandpictureframeassembly.

Features• Drivesbothslightandmediumheadbrads• Adjustabledepth-of-drive.• NeverLube®design• Comfortgrip• Belthook• No-Marpad• Includescase• 5-yearlimitedwarranty

SpecificationsItem#:760102NSequentialactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):1.92scfmAirInlet:¼"NPTToolWeight:2.7lbs(1.2kg)Height:9.9"(251mm)Length:9.8"(249mm)Width:2.2"(56mm)


AX

__21⁄8

__5⁄8 __5⁄8

AY

__1

.055

__1¼

__ 2½

.055

__1¼

__ 2½

FinishPro®25XP This lightweight, power-packed nailer drives both slight and medium headed brads into the hardest woods. The “on-tool” power adjustment allows the user to increase power by 30% when needed.

FinishPro®32Mg FinishPro®32 provides the versatility a professional contractor demands with redesigned piston and driver for improved performance and durability. Reversed safety foot improves line of sight.

NEW FinishPro®33Mg FIP33Mg’s magnesium body delivers an ultra light tool with SENCO dependability to provide a tool that will perform the toughest jobs while delivering professional results and comfortable operation.

FINISH & TRIM

8


Forfastenersseep.42SeriesAY&AX

ApplicationsDecorativetrim,furnituretrim,windowbeading,blindpinningofupholsteredandtrimpanels,rattan,scribemolding,cabinets,drawersandpictureframeassembly. Features• Magnesiummainbody-durable&ultra-light• Metalcylinderforincreaseddurability• Oilfreedesign• Adjustabledepth-of-drive• Selectiveactuationtrigger• Rotatablerearexhaustandbelthook• Swivelairplug• Over-moldrubbercomfortgrip• Includescaseandwrench• 1-yearlimitedwarranty

SpecificationsItem#:1U0021NSelectableactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):2.4scfmAirInlet:¼"NPTToolWeight:2.48lbs(1.12kg)Height:9.75"(248mm)Length:10.5"(267mm)Width:2.5"(63.5mm)



Seep.42SeriesAX,AY,AZforSENCObradnails

AX

__15⁄8

__5⁄8__5⁄8

AY

__1

ApplicationsDecorativetrim,furnituretrim,windowbeading,blindpinningofupholsteredandtrimpanels,rattan,scribemolding,cabinets,drawersandpictureframeassembly.

Features• Drivesbothslightandmedium-headedbrads• Requiresminimummaintenancefortrouble-freeupkeep

• Mufflerensuresquieteroperation• NeverLube®design• Includescase• 5-yearlimitedwarranty

SpecificationsItem#:430101NSequentialactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):1.92scfmAirInlet:¼"NPTToolWeight:2.3lbs(1kg)Height:8.25"(210mm)Length:9.5"(241mm)Width:2"(50mm)


SLP20XPThe SLP20XP design ensures unmatched ease of use as well as superior precision and driving power, which makes this tool perfect for fastening a variety of material types and thicknesses.

FinishPro®18Mg FIP18Mg’s magnesium body delivers an ultra light tool with SENCO dependability and the power to drive up to 21⁄8" brads.

AX

__21⁄8

__5⁄8 __5⁄8

AY

__1

FINISH & TRIM

9

23 Ga. 2" Micro Pinner

ApplicationsCabinet,decorativetrim,glazingbead,carvings,pictureframesandmolding.

Features• Extrapower–forusewithhardwood• Easyfastenerlengthadjustment• Rearexhaust• Lowloadfastenerindicator• Magazinebumperpad• Includescase,fittings,wrenchandtooloil• 1-yearlimitedwarranty

SpecificationsItem#:2C0001NSequentialactuationtriggerReg.OperatingPressure:70-95psi(4.8-6.5bar)AirConsumption(60cyclespermin.):0.84scfmAirInlet:¼"NPTToolWeight:2.4lbs(1.1kg)Height:6.75"(171mm)Length:8.89"(225mm)Width:1.64"(41mm)

FastenerCapacity:110Gauge:23Range:½"–1"Collation:Straightgluedstrip

_½

_1

A1 A1

_1

_2

Forfastenersseep.42forSENCOMicroPins

ApplicationsCabinet,decorativetrim,glazingbead,carvings,pictureframesandmolding.

Features• Extrapower–forusewithhardwood• Rearexhaust–directsoilanddustawayfromworksurface

• Switchabletriggerwithlock• Comfortgrip• Belthook• No-Marpad• Includescase,fittings,wrenchandtooloil• 1-yearlimitedwarranty

SpecificationsItem#:4N0001NSwitchabletriggerwithlockReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):1.2scfmAirInlet:¼"NPTToolWeight:2.7lbs(1.2kg)Height:9.6"(243mm)Length:10"(256mm)Width:2.38"(61mm)LipLength:1"(25mm)

FastenerCapacity:106Gauge:23Range:1"–2"Collation:Straightgluedstrip

_½

_1

A1 A1

_1

_2

Seep.42forSENCOMicroPinsfasteners

23 Ga. 1" Micro Pinner

FinishPro®11 The FIP11 23 ga. Micro Pinner has the power to drive 1" – 2" headless pins into hardwoods. The pins fasten the smallest of decorative trim securely and leave a nearly invisible hole – no splitting or puttying.

FinishPro®10This 23 ga. Micro Pinner is the perfect tool for your intricate finish and trim projects. The pins fasten the smallest of decorative trim securely and leave a nearly invisible hole – no splitting or puttying.

FINISH & TRIM

* Trigger Actuation availability - S: Sequential C: Contact Sel: Selectable

10

COMPARE APPLICATIONS & FEATURES

15Gauge 15Gauge 15Gauge 15Gauge 16Gauge 16Gauge 18Gauge 18Gauge 18Gauge 18Gauge 23Gauge 23Gauge

APPLICATIONS FN65DA GT65DA FIP42XP SFN30 GT65HA FIP33Mg FIP32Mg FN55AX FIP25XP SLP20XP FIP18Mg FIP11 FIP10Cabinets X X X X X X X X X X X

Baseboards X X X X X X X X X X X

Chairrail X X X X X X X X X X X X

Decorativetrim X X X X X X X X X

Door/windowcasings X X X X X X

Furniture X X X X X X X X X X X

Hardwoodfloors X X X X

Molding&trim X X X X X X X X X X X X X

Pictureframes X X X X X X X X X

Scribemolding X X X X X X X

Trimtosteelstuds X X X X

Windowbeading X X

FEATURESFastenerRange 1¼"-2½" 1¼"-2½" 1¼"-2½" 1"-2" 1¼"-2½" 1¼"-2½" 1¼"-2½" 5⁄8"-21⁄8" 5⁄8"-21⁄8" 5⁄8"-13⁄8" 5⁄8"-21⁄8" 1"-2" ½"-1"

Shank .069" .069" .069" .069" .055" .055" .055" .039" .039" .039" .039" .0267" .0267"

FastenerCapacity 110 110 104 104 110 110 110 110 110 106 110 106 110

Weight 6.2LBS 5.2LBS 4.7lbs 4.65lbs 3.6lbs 3.83lbs 4.2lbs 6.0lbs 2.7lbs 2.3lbs 2.5lbs 2.7lbs 2.4lbs

Height 13.5" 14.2" 11.25" 9.6" 10.9" 11.5" 10.9" 13.0" 9.6" 8.25" "9.75" 9.6" 6.75"

Length 13.0" 12.5" 13.0" 12.0" 12.16" 12" 9.8" 9.5" 10.5" 10.0" 8.9"

Mainbody Al/Composite Composite Mg Composite Composite Mg Mg Al/Composite Al Al Mg Al Al

Depth-of-Drive X X X X X X X X X

JamEZ-Clear X X X X X X X X X

TriggerActuation* Sel S S,C S,C S Sel S Sel S,C S,C Sel S S

BeltHook X X X X X X X X x X X

NeverLube/No-oildesign X X X X X

Exhaust Fixed Adjustable Adjustable Fixed Adjustable Adjustable Adjustable Fixed RearAdj. RearAdj. Rear

Warranty 2yrs 2yrs 5yrs 1yrs 2yrs 1yr 5yrs 2yrs 5yrs 5yrs 1yr 1yr 1yr

FN65DA GT65DA FIP42XP SFN30 GT65HA FIP33Mg FIP32Mg FN55AX FIP25XP SLP20XP FIP18Mg FIP11 FIP10

11

FINISH & TRIM

15Gauge 15Gauge 15Gauge 15Gauge 16Gauge 16Gauge 18Gauge 18Gauge 18Gauge 18Gauge 23Gauge 23Gauge

APPLICATIONS FN65DA GT65DA FIP42XP SFN30 GT65HA FIP33Mg FIP32Mg FN55AX FIP25XP SLP20XP FIP18Mg FIP11 FIP10Cabinets X X X X X X X X X X X

Baseboards X X X X X X X X X X X

Chairrail X X X X X X X X X X X X

Decorativetrim X X X X X X X X X

Door/windowcasings X X X X X X

Furniture X X X X X X X X X X X

Hardwoodfloors X X X X

Molding&trim X X X X X X X X X X X X X

Pictureframes X X X X X X X X X

Scribemolding X X X X X X X

Trimtosteelstuds X X X X

Windowbeading X X

FEATURESFastenerRange 1¼"-2½" 1¼"-2½" 1¼"-2½" 1"-2" 1¼"-2½" 1¼"-2½" 1¼"-2½" 5⁄8"-21⁄8" 5⁄8"-21⁄8" 5⁄8"-13⁄8" 5⁄8"-21⁄8" 1"-2" ½"-1"

Shank .069" .069" .069" .069" .055" .055" .055" .039" .039" .039" .039" .0267" .0267"

FastenerCapacity 110 110 104 104 110 110 110 110 110 106 110 106 110

Weight 6.2LBS 5.2LBS 4.7lbs 4.65lbs 3.6lbs 3.83lbs 4.2lbs 6.0lbs 2.7lbs 2.3lbs 2.5lbs 2.7lbs 2.4lbs

Height 13.5" 14.2" 11.25" 9.6" 10.9" 11.5" 10.9" 13.0" 9.6" 8.25" "9.75" 9.6" 6.75"

Length 13.0" 12.5" 13.0" 12.0" 12.16" 12" 9.8" 9.5" 10.5" 10.0" 8.9"

Mainbody Al/Composite Composite Mg Composite Composite Mg Mg Al/Composite Al Al Mg Al Al

Depth-of-Drive X X X X X X X X X

JamEZ-Clear X X X X X X X X X

TriggerActuation* Sel S S,C S,C S Sel S Sel S,C S,C Sel S S

BeltHook X X X X X X X X x X X

NeverLube/No-oildesign X X X X X

Exhaust Fixed Adjustable Adjustable Fixed Adjustable Adjustable Adjustable Fixed RearAdj. RearAdj. Rear

Warranty 2yrs 2yrs 5yrs 1yrs 2yrs 1yr 5yrs 2yrs 5yrs 5yrs 1yr 1yr 1yr

FN65DA GT65DA FIP42XP SFN30 GT65HA FIP33Mg FIP32Mg FN55AX FIP25XP SLP20XP FIP18Mg FIP11 FIP10

12

FRAMING & SHEATHING

Whether you are framing, sheathing, truss building, sub-flooring, decking, crate and box assembly, pallet making or fencing, we have the tool for you. SENCO offers a wide selection of strip and coil framing and sheathing nailers.

GT90CHGT90CH cordless clipped gas framer combines the convenience of a cordless tool with the power and utility of a pneumatic framing nailer.

ApplicationsPerfectforframingcrews,remodelers,punch-outorservicecrews.Builtfordurabilityandreliability,theGT90CHcomeswithaNi-MHbattery,batterycharger,caseandservicetools.Features• Powertodrive3½”framingnails• Cordlessconvenience• Powerfulmotor• Adjustabledepth-of-drive• Durablemetalmagazine• RafterHook• Fullcomfortgrip• Includesplasticcase,Ni-MHbattery,battery

charger, service tools• 2-yearlimitedwarranty

SpecificationsItem#:5F0001NSequentialactuationtriggerToolWeight:7.9lbs(3.6kg)Height:14.8”(376mm)Length:14.6”(371mm)Width:4.2”(107mm)Battery:6voltNi-MHCharger:2hoursFuelCell:SENCO40gorothercompatiblefuelForfuelcellsandothergastoolaccessoriesseep.76

FastenerCapacity:70ShankDiameter:.113”-.131”Range:2”–3½”Collation:34˚angledtapedstrip _3½

_3

_2 _2

.120 .113-.131

G6, H

6, K

6, G

E, H

E

G5, H

5, K

5, G

C, H

C, K

C

Forfastenersseep.43-45SeriesGE,HE,GC,HC,KCandRoundStrip

CORDLESS GAS POWERED FRAMING & SHEATHING

3½" 34˚ Clipped Head Framing NailerNo Hoses, No Compressors, No Hassles.

3½" 20˚ Full Round Head Framing NailerApplicationsPerfectforframingcrews,remodelers,punch-outorservicecrews.Builtfordurabilityandreliability,theGT90FRHcomeswithaNi-MHbattery,batterycharger,caseandservicetools.

Features• Powertodrive3½”framingnails• Cordlessconvenience• PowerfulMotor• Adjustabledepth-of-drive• Durablemetalmagazine• RafterHook• Fullcomfortgrip• No-Marpad• Includesplasticcase,Ni-MHbattery,battery

charger, service tools • 2-yearlimitedwarranty

SpecificationsItem#:5G0001NSequentialactuationtriggerToolWeight:7.9lbs(3.6kg)Height:14.5”(370mm)Length:14.7”(373mm)Width:4.2”(107mm)Battery:6voltNi-MHCharger:2hoursFuelCell:SENCO40gorothercompatiblefuelForfuelcellsandothergastoolaccessoriesseep.76

FastenerCapacity:32ShankDiameter:.113”-.131”Range:2”–3½”,Ring2”–3”Collation:20˚angledgluedstrip

_3½

_3

_2 _2

.113-.120 .113-.131

GL, H

L

GD

, HD

, KD

Forfastenersseep.47-48SeriesGL,HL,GD,HD,KD

GT90FRHGT90FRH cordless full round head gas framer combines the convenience of a cordless tool with the power and utility of a pneumatic framing nailer.

13

Forfastenersseep.43-45forSENCOSeriesHF,GE,HE,GC,HC,KC,MD&RoundStrip

Applications Forengineeredlumber,framing,sheathing,trussbuilding,sub-floor,decking,crate,boxassembly,palletmaking,furnitureframeassembly,fencingandindustrialapplications.

Features• 20%morepowerfulthanstandardframingnailers–yetweighsonly8.5lbs.

• Toolfreedepth-of-drive• Reducedjamsandmis-feeds–PatentedTrueDrive™magazine

• Lowprofiledesignfitseasilybetweenstudsandjoists.

• Contactorsequentialtriggeractuation–Patenteddriveselector

• 5-yearlimitedwarranty

SpecificationsItem#:5B0001NSelectableactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):7.9scfmAirInlet:3/8"NPTToolWeight:8.5lbs(3.86kg)Height:13.8"(351mm)Length:17.3"(440mm)Width:4.76"(121mm)

FastenerCapacity:72-95ShankDiameter:.113"–.148"Range:2"–4"Collation:34˚angledtapedstrip

__3 __3

__4

_2_2 _2

.120 .113-.120 .113-.148

HF

GE, H

E

GC, H

C, KC

, MD

ApplicationsFraming,sheathing,trussbuilding,sub-flooringanddecks.Otherapplicationsincludecrateandboxassembly,palletmaking,furnitureframeassemblyandfencing.

Features• Wellbalancedandultra-light–7.4lbs.• Useslessairtodrivenails–Highlyefficient

internal design• Reducedjamsandmis-feeds–PatentedTrueDrive™magazine

• Easilyfitsbetweenstudsandjoists–Lowprofiledesign



SpecificationsItem#:4Z0001NSelectableactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):5.2scfmAirInlet:3/8"NPTToolWeight:7.4lbs(3.35kg)Height:11.9"(302mm)Length:17.3"(440mm)Width:4.5"(114mm) FastenerCapacity:83ShankDiameter:.113"-.148"Range:2"–3¼"Collation:34˚angledtapedstrip

__3 __3

__3¼

_2_2 _2

.120 .113-.120 .113-.148

HF

GE, H

E

GC, H

C, KC

, MD

3¼" 34˚ Clipped Head Framing Nailer

SN901XPThis SN901XP framing nailer packs plenty of power. Specifically engineered for demanding pros and demanding environments. Built with enhanced features and superior components.

SN951XP The SN951XP will consistently drive up to a 4" x .148" nail making it both versatile and exceptionally powerful.

3¼" 20˚ Full Round Head Framing NailerApplicationsFraming,sheathing,trussbuilding,sub-flooringanddecks.Otherapplicationsincludecrateandboxassembly,palletmaking,furnitureframeassemblyandfencing.

Features• Wellbalancedandultra-light–7.4lbs.• Useslessairtodrivenails–Highlyefficient





SpecificationsItem#:4H0001NSelectableactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):5.2scfmAirInlet:3/8"NPTToolWeight:7.4lbs(3.35kg)Height:11.9"(302mm)Length:17.3"(440mm)Width:4.5"(114mm)

FastenerCapacity:64ShankDiameter:.113"–.148"Range:2"–3¼"Collation:20˚angledgluedstrip

Forfastenersseep.47-48forSENCOSeriesGL,HL,GD,HD,KD,MD

_2_2_2

__3__3

__3¼

.113-.120.113-.120 .113-.148

GL, H

L

GD, H

D, KD

, MD

SN902XP This well-balanced ultra-light SN902XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day.

FRAMING & SHEATHING

4" 34˚ Clipped Head Framing Nailer

Forfastenersseep.43-45forSENCOSeriesHF,GE,HE,GC,HC,KC,MD&RoundStrip

14

FRAMING & SHEATHING

NOTE: See page 5 for a complete list of Gas Tool Accessories

__3½

_2

__3½

_2

__3½

_2

Mini Hand NailerDrives bulk nails up to 3½" in applications to tight to swing a hammer.

2" - 3½" Bulk NailerApplicationsJoisthangers,foundationanchors,seismicandhurricanestraps,tiesandothermetalframinghardware.

Features• Compact&powerfulenoughtodrive2”-3½”

bulk nails• Smallsizeforaccessibility• Ultra-lightatjust1lbs• Magneticnoseholdsnailinplaceforsafe,accurateplacement

• Nailpointcanbeeasilyplacedwithinarecessforsafe,efficientfastening

• Includedfittingprovidesplug-and-playconve-nienceoutofthebox


SpecificationsItem#:PC1195Reg.OperatingPressure:60-110psi(4-7.6bar)AirConsumption(60cyclespermin.):2-4scfmAirInlet:1/4"NPTToolWeight:1lbs(.45kg)Height:4"(101mm)Length:2.75"(70mm)Width:2"(55.6mm)

FastenerCapacity:1Range:Bulknailsfrom2"-3½"

ApplicationsFraming,sheathing,trussbuilding,sub-flooringanddecks.Otherapplicationsincludecrateandboxassembly,palletmaking,furnitureframeassemblyandfencing.

Features• Wellbalancedandweightonly8.4lbs.• Useslessairtodrivenails–Highlyefficient





SpecificationsItem#:5A0001NSelectableactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):7.9scfmAirInlet:3/8"NPTToolWeight:8.4lbs(3.8kg)Height:13.57"(345mm)Length:20.3"(516mm)Width:4.75"(121mm)

FastenerCapacity:64ShankDiameter:.120"–.162"Range:2"–3½"Collation:20˚angledgluedstrip

_2_2_2

__3__3

__3½

.120.120 .120-.162

GL, H

L

GD, H

D, H

J, KD

, MD

3½" 20˚ Full Round Head Framing Nailer

SN952XPDrives up to .162" shank, 3 ½” nails into the toughest engineered lumbers. This tool has the power and fastener range to dominate the toughest jobs. Forfastenersseep.47-48forSENCO

SeriesGL,HL,GD,HD,KD,MD

__7

_2

__7

_2

__7

_2

ApplicationsJoisthangers,foundationanchors,seismicandhurricanestraps,tiesandothermetalframinghardware.

Features• Drivesbulknailsfrom2"to7"• Softrubberpalmpadforcomfortablegrip• Magneticnailguideforfasterandeasierdriv-

ing• Includesleatherstrap-reducesfatigue• 1-yearlimitedwarranty

SpecificationsItem#:PC0781Reg.OperatingPressure:50-125psi(3.5-8.4bar)AirConsumption(60cyclespermin.):2-4scfmAirInlet:3/8"NPTToolWeight:2.4lbs(1.1kg)Height:5.8"(122mm)Length:4"(101mm)Width:3.25"(83mm)

FastenerCapacity:1Range:Bulknailsfrom2"-3½"andupto7"withoptionalguidetips

2" - 7" Bulk Nailer

A20 Hand Nailer The SENCO A20 bulk pneumatic hand nailer is the ideal tool for tight space nailing and metal connector attachment.

* Trigger Actuation: S: Sequential C: Contact Sel: Selectable

15

FRAMING & SHEATHING

APPLICATIONS GT90CH SN901XP SN951XP GT90FRH SN902XP SN952XP Mini Hand Nailer Hand Nailer

Framing/Sheathing X X X X X X X X

Trussbuilding X X X X X X X X

Subflooring X X X X X X X X

Decking X X X X X X X X

Fencing X X X X X X X X

Pallets X X X X X X

Crate,boxes X X

Siding X X X X

Claytiles X X X

Woodtogreenconcrete X X

Metalframinghardware X X

FEATURES

Fastener Range 2"-3½"CH 2"-3¼"CH 2"-4"CH 2"-3½"FRH 2"-3¼"FRH 2"-3½"FRH 2"-3½"FRH 2"-7"FHR

Shank .113"-.131" .113"-.148" .113"-.148" .113"-.131" .113"-.148" .120"-.162" .113"-162" .113"-162"

FastenerCapacity 70 83 83 32 64 64 1 1

Weight 7.9lbs 7.4lbs 8.5lbs 7.9lbs 7.4lbs 8.4lbs 1lb 2.4lbs

Height 14.8" 11.9" 13.8" 14.5" 11.9" 13.57" 4" 5.8'

Length 14.6" 17.3" 17.3" 14.7" 17.3" 20.3" 2.75" 4'

Depth-of-Drive X X X X X X

TriggerActuation* S Sel. Sel. S Sel. Sel.

RafterHook X X

Warranty 2yrs 5yrs 5yrs 2yrs 5yrs 5yr 1yr 1yr

GT90CH SN901XP SN951XP GT90FRH SN902XP SN952XP Mini Hand Nailer Hand Nailer

Clipped Head Nailers. . . Full Round Head Nailers . . . . . . . . . . . . . . . Cordless Gas


Cordless Gas

16

1¾" Coil Nailer

Forfastenersseep.52SeriesM00,HM

ApplicationsForasphaltandfiberglassshinglenailing,forbothnewroofsandreroofing.Alsoforattachingwaterprooftarpaper,metaldripedges,insulationboard,andwithanoptionalattachmentforvinylandaluminumsiding.

Features• Aluminummainbodyandcap• Easyone-handedoperation,just5.4lbs.• Tool-freeadjustabledepth-of-drive• Durablemoldedcomfortgrip• 360˚tool-freeadjustableexhaust• Adjustableshingleguide• Steelwearplatesreduceshingleabrasion• Adjustablenailcanister• Toolincludescase,tooloilandwrench• 5-yearlimitedwarranty

SpecificationsItem#: 3D0101N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 6.54 scfmAir Inlet: 1/4" NPTTool Weight: 5.4 lbs (2.5 kg)Height: 10.5" (267 mm)Length: 10.25" (260 mm)Width: 4.5" (50 mm)

FastenerCapacity: 120 Gauge: 11 (.120") (3.0 mm)Range: ¾" – 1¾"Collation: Angular, flat wire wound coil

SENCO has dependable tools for all your roofing applications, including our popular RoofPro™ Coil Nailers and our 1" Wide Crown PW150R Stapler for asphalt and fiberglass shingle fastening. For installing house wrap and felt paper we offer the BC58 Button Cap Stapler and A11 Stapler.

1¾" Coil NailerApplicationsForasphaltandfiberglassshinglenailing,forbothnewroofsandreroofing.Alsoforattachingwaterprooftarpaper,metaldripedges,insulationboard.

Features• Aluminummainbodyandcap• Adjustabledepth-of-drive• 360°adjustableexhaustandadjustableshingle

guide• Steelwearplatesreducesshingleabrasion• Adjustablenailcanister• Toolincludescase,tooloilandwrench• 1-yearlimitedwarranty

SpecificationsItem#: 3C0001N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 5.79 scfmAir Inlet: 1/4" NPTTool Weight: 5.62 lbs (2.55 kg)Height: 10.88" (276 mm)Length: 10.25" (260 mm)Width: 4.5" (114 mm)

FastenerCapacity: 120 Gauge: 11 (.120") (3.0 mm)Range: ¾" – 1¾"Collation: Angular, flat wire wound coil

.120HMM00

__1¼

__1

__1¾

.120

_¾

Listed

.120HMM00

__1¼

__1

__1¾

.120

_¾

Listed

RoofPro™455XPStep up to the tough and dependable RoofPro 455XP Coil Nailer. It’s loaded with the features you asked for, yet is light enough for one-handed operation. Simply the best roofing nailer money can buy.


RoofPro™450The RoofPro450 Coil Nailer has steel wear plates and fully adjustable shingle guide, drive depth and exhaust.

ROOFING

16 Ga. 1" Crown 1½" Roofing Stapler

Forfastenersseep.58SeriesP

P

1

_5∕8

_1½

Applications:Asphaltandfiberglassshingles,roofingfelt,carton-to-skid,furnitureframes,wirelathing,butt-joints,andfoaminsulationboard.

Features• Positive-lockingadjustabledepthofdrive• Carbidewearplatesprotecttoolfromshingles• High-strengthcompositemagazinehelpseliminateskipping,jams,andmisfires

• Adjustabledepth-of-drive• EZclearlatchprovideseasyaccesstoclearfasteners

• Longlastingwearplatesandcarbidesafety• Rotatingbelthookmakesthetoolportableand

easilytostow• 5-yearlimitedwarranty

Specifications:Item#: 4X0001N: Contact actuation triggerOperating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 3.18 scfmAir Inlet: 3/8" NPTTool Weight: 5.5 lbs (2.5 kg)Height: 9" (229 mm)Length: 15.25" (387 mm)Width: 4" (105 mm)

Fastener:Capacity: 160 Gauge: 16Crown: 1" Range: ⁵⁄₈" – 1½" Collation: Straight glued taped strip

½" Crown 5⁄8" Staple + 1" Button Cap

Forfastenersseep59SeriesM004092ButtonCap

Applications Forhousewrapandroofingfeltinstallation.

Features• Capcapacity–110capcollation• Easyloadsystemforstaplesandcaps• Aluminumhousing–ultra-light4.1lbs.• Balancedandfastforhighproduction• Belthook• Sidemountcapcollator–holdscapsregardlessoftoolposition

• Includescarryingcase,hexwrenches,tooloil,¼”malecouplerandmanual


SpecificationsItem#: 4A0001N Contact actuation triggerReg. Operating Pressure: 60-95 psi (4.1-6.5 bar)Air Inlet: 1/4" NPTTool Weight: 4.1 lbs (2 kg)Height: 8.5" (216 mm)Length: 12.5" (317 mm)Width: 3.5" (89 mm)

FastenerCapacity: 110Item#: M0040922200 button caps and staples per box.Staple:Gauge: 21, Crown ½" Range: 5⁄ 8” galv.Cap: 1” plastic, driven with staple in tandem.

5⁄8__

1

2200 button caps and staples per box.Drives 21 ga. staples with 1” plastic caps in tandem.

Crown: 1⁄2 (12.7mm)Gauge: 21

½

M004092

20 Ga. 7⁄16" Crown 3⁄8" Hammer Stapler

Forfastenersseep.59SeriesH

Applications Forhousewrapandroofingfeltinstallation.

Features• Ruggedall-steelconstruction• Easytoserviceandmaintain• Comfortableflutedhandlewithgrip• Magazineholds168staples• 1-yearlimitedwarranty

SpecificationsItem#:PC0700ToolWeight:2lbs(.9kg)Height:1.75"(44.4mm)Length:12.3"(312.4mm)

FastenerCapacity:168Gauge:20Range:3 ⁄8"Crown:7⁄16"

__3⁄8

H7⁄16

17

WC150R XPThis heavy-duty wide crown roofing stapler is capable of handling a variety of applications. Constructed of durable, high-quality, high-strength materials, the WC150RXP is designed for extreme performance and long life.

BC58 Button Cap StaplerSENCO’s BC58 Button Cap Stapler saves time and money when installing felt paper and house wrap. Drives 21 gauge ½" crown, 5⁄8” staples with plastic caps in tandem.

A11 Stapling HammerFast and hose free stapler for installation of roofing felt, plastic sheeting, moisture wrap and insulation.

ROOFING

When installing wood shakes go with our SCN49 Coil Nailer or the SNS Series of Staplers using our stainless steel nails or staples. Clay tiles can be laid faster without breakage with our SN952XP Nailers driving the HJ oversize head roof tile nail .

18

Cedar Shakes: 2½" Coil Nailer

Forfastenersseep.57SeriesNStainless

Specifications:Seepage21fortoolSpecifications

Fastener:Driveshotdippedgalv.andstainless.082-.113Range:1¼”to2½"

Forfastenersseep.47eriesHJ

Clay Roof Tiles: 3½" 20° Full Round Head Nailers

SCN49 Item #: 5J0001N

_17⁄8

_1¼

_2½_2½

ED, EJ ,GD BL, EL, GL, SE

Forfastenersseep.49-51SeriesED,EJ,GD,BL,EL,GL

Cedar Shakes: 7⁄16" Crown Staplers

N

_1¼

7⁄16

_2

SN952XPSN952XP Item #: 5A0001N

.120

HJ25

.120

HJ27

_2½

_3

Features• Wellbalancedandweightsonly8.4lbs.• Useslessairtodrivenails–Highlyefficient



• Contactorsequentialtriggeractuation–Patented drive selector


SpecificationsSelectableactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):5.2scfmAirInlet:3/8"NPTToolWeight:8.4lbs(3.8kg)Height:13.57"(345mm)Length:20.3"(516mm)Width:4.75"(121mm)Capacity:64

Tile FastenerDrivesoversizeheadrooftilenails.20˚smooth.120"shank.Range:HJ25(2.½")-HJ27(3")

SNS SeriesSNS50XP, SNS45XP, SNS44XP, SNS41

SpecificationsSeepages29-30fortoolSpecifications

FastenerCapacity160,Gauge:16,Crown:7⁄16"Range:1¼"-2"stainlesssteelstaples

SPECIALTy ROOFING APPLICATIONS

19

COILNAIL COILNAIL 1"CROWNSTAPLE 1"BUTTONCAP 7/16"CROWNSTAPLE COILNAIL 7/16"CROWNSTAPLE20˚FRHNAILER

APPLICATIONS RP455XP RP450 WC150R BC58 A11 SCN49 SNS SERIES SN952XP

CompositeShingles X X X

WoodShakes X X

ClayTileShingles X

RoofingFelt X X X X X

VaporBarriers X X X

InsulationBoard X X X X X

CementBoard X X X X X

FEATURES

FastenerRange ¾"-1¾" ¾"-1¾" 5⁄8"-1½" 5⁄8"Staple/1"Cap 3⁄8" 1¼"-2½" 1"-2" 2"-3½"

Shank/Crown .120" .120" .069"/1" 1⁄2"Crown .019"/7⁄16" .082"-.113" .055/7⁄16" .120"-.162"

FastenerCapacity 120 120 160 110 168 250-375 140-160 64

Weight 5.4lbs. 5.9lbs. 5.5lbs. 4.1lbs. 2.0lbs. 6.0lbs. 5.1lbs. 8.4lbs.

Height 10.5" 10.0" 9.0" 8.5" 1.75" 12.0" 11"-12" 14.25"

Length 10.25" 10.25" 15.25" 12.5" 12.3" 12.25" 14"-14.5" 20"

Depth-of-Drive X X X X X X

JamEZ-Clear X X X X X

TriggerActuation* S,C S,C C C Sel. S,C Sel.

Exhaust Adjustable Adjustable Cap-fixed Adjustable Adjustable Adjustable Cap-fixed

Warranty 5yrs 1yr 5yrs 1yr 1yr 1yr 1-5yrs 5yrs

RP455XP RP450 WC150R BC58 A11 SCN49 SNS SERIES SN952XP

*TriggerActuationavailability-S:SequentialC:ContactSel:Selectable


SCN65XP This rugged coil nailer drives up to a 3½" nail, while still being light enough for a one-handed operation. It can hold up to 275 nails for maximum productivity in a wide variety of applications.

.099-.120 .113-.131

_ 3½

_ 3

.099-.120

_ 3¼

BJW

ood

to m

ason

ry

.099

_ 2¼

GD, H

D, K

D

BK, H

K

BL, B

T, GL

, HL

ApplicationsFor on-site, manufactured housing, including sheathing, decking, subflooring, and exterior decks. Also, industrial markets such as heavy-duty pallet construction, pallet repair, and crate and box assembly. Features• Lightandfastforgreaterproductivity• Adjustabledepth-of-drive• Highloadcapacity• Fastcycletimeincreasesproductivity• E-Zloaddesignsavestime• 5-yearlimitedwarranty

SpecificationsItem#: 520101N Contact actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 8.29 scfmAir Inlet: 3/8" NPTTool Weight: 7.5 lbs (3.4 kg)Height: 12.38" (314 mm)Length: 12.88" (327 mm)Width: 5.38" (137 mm)

FastenerCapacity: 250-275Shank Diameter: .099" - .113"Range: 2"– 2¾"Collation: Flat, 15˚ angled coil wire

_ 2¾ _ 2¾ _ 2¾ _ 2¾

.099 .099-.113 .113

BJW

ood t

o mas

onry

.099

_ 2¼

BK

BL, B

T, GL GD HR

*

*Req

uires

a m

odi�

ed SC

N65X

P - sp

ecial

orde

r # XA

1739

.120

20

SCN60XPPowerful yet lightweight, this coil nailer drives up to a 2½" nail. It can hold up to 275 nails for maximum productivity in a wide variety of applications.

ApplicationsForon-site,manufacturedhousing,includingframing,sheathing,decking,subflooring,andexteriordecks.Also,industrialmarketssuchasheavy-dutypalletconstruction,palletrepair,andcrateandboxassembly.

Features• Highestpower-to-weightratioinitsclass• Lightenoughforone-handedoperation• Adjustabledepth-of-drive• Fastcycletimeincreasesproductivity• E-Zloaddesignsavestime• 5-yearlimitedwarranty

SpecificationsFramers Item#: 540104N Contact actuation trigger 540130N Sequential actuation triggerIndustral Item#: 540101N Contact actuation trigger 540102N Sequential actuation triggerReg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cycles per min.): 9.54 scfmAir Inlet: 3/8" NPTTool Weight: 8 lbs (3.6 kg)Height: 14.1" (359 mm)Length: 12.88" (327 mm)Width: 5.38" (137 mm)

FastenerCapacity: 225-275 Shank Diameter: .099" - .131"Range: 2"– 3½"Collation: Flat, 15˚ angled coil wire

Forfastenersseep.49-50SeriesBK,HK,BL,BT,GL,HL,BJ,GD,HD,KD

Forfastenersseep.49-50SeriesBK,BL,BT,GL,BJ,GD,HR*

3½" Coil Nailer

2¾" Coil Nailer

COIL NAILERS

SENCO has the right Coil Nailer for your application, be it framing and sheathing, decking, subflooring, wood to masonry, cement board, underlayment, pallets, packaging, crate and box assembly, siding or fencing. Available in XtremePro™, ProSeries™ and PalletPro™ with nail ranges from 1¼" - 51⁄8".

21

* For soft woods only when driving 2½"Screw or Ring nails.

2

_ 2½* _ 2½

_1¼

_1¾

22

.082 .113.092-.113

BE, B

L, BT

, EL,

GL*

GD

SE BJW

ood

to m

ason

ry

.099 .099.092

_ 2¼

ED, E

J

_ 2¼

_ 23⁄8*

BK*

.092.092

_2¼ _2¼

1¼

1¾1¾ 1¾

.082

SE EL

ED, E

J

2¾

2½

2

.099 -.113 .092-.113.099

BJW

ood t

o mas

onry

.099

21/4

BK

BL, B

T, GL

ED, E

J, GD

23⁄8

2

2½

2

SCN49Our newest siding coil nailer, driving up to a 2½" nail. This tool is perfect for a wide range of siding applications including fiber cement products from Hardi™ and Certainteed™. This tool drives smooth, ring, and screw shank coil nails in both wire and plastic sheet collation.

PalletPro™57F The PalletPro™ 57F Coil Nailer is designed to drive up to a 2¼" nail. Built for high speed operations and designed to handle the toughest production applications. For boxes, crates, carton-to-skid and pallet applications.

PalletPro™70The PalletPro™ 70 Coil Nailer is designed to drive up to a 2¾" nail. Well balanced and powerful and designed with the toughest applications in mind. Drives smooth, ring and screw shank coil nails.

2½" Coil Nailer

Forfastenersseep.49-51SeriesSE,BE,BL,BT,EL,GL,ED,EJ,BJ,*BK,GD

Applications Siding,exteriordecks,decking,exteriortrim,fencing,subflooring,woodshingles,crateandboxassemblyandfloorsheathing. Features• Wellbalancedandlightweight• Selectabletrigger–youselectmodeofoperation

• Dualcollation–Allowsthechoicebetweenwireorplasticcollation

• Adjustabledepth-of-drive• 1-yearlimitedwarranty

SpecificationsItem#: 5J0001N Selectable actuation trigger Reg. Operating Pressure: 70-120 psi (4.8-8.3 bar)Air Consumption (60 cpm.): 3.9 scfmAir Inlet: 3/8" NPTTool Weight: 5.1 lbs (2.31 kg)Height: 12" (304 mm)Length: 12.25" (314 mm)Width: 5.19" (132 mm)

FastenerCapacity: 250-375 Shank: .082"-.113"Range: 1¼" –2½"Collation: 15˚ angular flat wire wound or plastic carrier strip

2¼" Coil Nailer

Forfastenersseep.49-51SeriesSE,EL,ED,EJ

Applications Alightweightandversatiletoolforboxesandcrates,carton-to-skidandpallets. Features• Collation–wireweld• Aluminummainbody–weighs5.9lbs.• Adjustablenailcanisteraccommodateswide

rangeofnails• Highcapacitynylonmagazine–fastandeasy

loading• Bodyprotection–sidesteelwearplatesreduceabrasionoftool

• Highdurabilitydriverandpistonbumperforlonglife


SpecificationsItem#: 4L0001N Contact actuation triggerReg. Operating Pressure: 70-120 psi (4.9-8.4 bar)Air Consumption (60 cycles per min.): 3.07 scfmAir Inlet: 3/8" NPTTool Weight: 5.9 lbs (2.67 kg)Height: 11.25" (286 mm)Length: 11.88" (302 mm)Width: 5.25" (133 mm)

FastenerCapacity: 300-350 Shank: .082"-.092"Range: 1" – 2¼"Collation: 15˚ angular, flat wire wound coil

2¾" Coil Nailer

Forfastenersseep.49-51SeriesBK,BL,BT,GL,BJ,ED,EJ,GD

Applications Forboxesandcrates,carton-to-skid,fencing,packagingandpallets.

Features• Aluminummainbody–weighs7.9lbs.• Balancedandpowerfulforheavydutyapplications

• Adjustablenailcanisteraccommodateswiderangeofnails

• Highcapacitynylonmagazine–fastandeasyloading

• Bodyprotection–sidesteelwearplatesreduceabrasionoftool


SpecificationsItem#: 4M0001N Contact actuation triggerReg. Operating Pressure: 70-120 psi (4.9-8.4 bar)Air Consumption (60 cycles per min.): 4.78 scfmAir Inlet: 3/8" NPTTool Weight: 7.9 lbs (3.6 kg)Height: 12.25" (317 mm)Length: 13.25" (339 mm)Width: 5" (129 mm)

FastenerCapacity: 250-300 Shank: .092"-.113"Range: 1¾" – 2¾" Collation: 15˚ angular, flat wire wound coil

COIL NAILERS

Plastic Carrier Strip Hot Dipped Galvanized Coil Siding Nails

2¼EL (.092)

ED (.092)2¼

1¾

1¾

Fastener Specifications: Plastic Carrier Strip Coil Nails: 1¾" – 2¼”

2EJ (.092)

2¼

(.218)

(.218)(.233)

Item Code Diameter Wound/Shank/Head Length Point Finish Coating Features M/Box Wt/Box Box/Skid UPC Code ED19ASBC .092 Flat., Smooth FRH (.218) 1¾ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 14 lbs 24 7-41474-06104-2 ED23ASBC .092 Flat., Smooth FRH (.218) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 17 lbs 24 7-41474-06105-9 EJ21ASBC .092 Flat., Smooth, Oversize FRH (.233) 2 Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 15 lbs 24 7-41474-06106-6 EJ23ASBC .092 Flat., Smooth, Oversize FRH (.233) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 17 lbs 24 7-41474-06107-3 EL19ASBC .092 Flat., Ring, FRH (.218) 1¾ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 14 lbs 24 7-41474-06108-0EL23ASBC .092 Flat., Ring, FRH (.218) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil 3.6 17 lbs 24 7-41474-06109-7

ApplicationsThese nails are primarily intended for siding, fencing, light pallets, packaging and crating.

Features and Benefits• Noflaggingorwirefragmentsunderthenail

head results in no rust stains or cut fingers from sharp wire

• Hot-dippedgalvanizationprovidesexcellentcorrosion resistance

Works Great with ourSCN491¼" - 2½" Coil Nailer Item#: 5J0001N Seep.23

Also Fits:SENCO: SCN56, HITACHI: NV65AH, NV75AG

SENCO’s hot-dipped, full round head, plastic carrier strip coil siding nails eliminate the wire flagging that may oc-curs with wire collated siding nails. By using Plastic Car-rier Strip Nails you eliminate wire flagging, improve the overall appearance of your work, reduce the risk of rust, stains and improve the application of paints and seal-ants. Our hot-dipped galvanization meets or exceeds ASTM A153 Class D, the accepted and code-specified standard for hot-dipped galvanization. These nails may be used with pressure treated lumber, including ACQ.

22

COIL NAILERS

23

4

.099 -.148

3

.099 -.120.099 -.120

3

3¼

BJW

ood

to m

ason

ry

.099

2¼

GD, H

D, K

D, M

P

BK, H

K

BL, B

T, GL

, HL

3½

_ 3¼_ 3¼

_ 3_ 3

HD

.120

KD

MD, M

P

.131

HL

.120

HK

.120

_ 51/8

.148

3½

PalletPro™100PalletPro™100 has the muscle and durability to consistently and reliably drive up to 4” x .148 nails all day long. The included T-handle helps comfortably maneuver and securely control the tool during operation. If your application needs large nails driven completely and reliably then the PalletPro™100 was designed for you. Note: A special order tool

PalletPro™130PalletPro™ 130 has the muscle and durability to consistently and reliably drive up to 5 1⁄8” x .148 nails all day long. It can hold up to 225 nails for maximum productivity in a wide variety of applications. For truss attachment, heavy duty framing, engineered lumber, docks and commercial applications. Note: A special order tool

4" Coil Nailer

Forfastenersseep.49-50SeriesBK,HK,BL,BT,GL,HL,BJ,GD,HD,KD,MP

ApplicationsTrussAttachment,HeavyDutyFraming,EngineeredLumber,DocksandCommercialApplication. Features• IncludesheavydutythreadedT-handleforusewhenappropriate,orremovalwhennotdesired

• Flexiblecollationdeflectoranddustguardforimprovedsafetyincommercialenvironments

• Strengtheneddriverandbumperforextendeduse and reliable service


SpecificationsItem#:5L0001NContactactuationtriggerReg.OperatingPressure:70-120psi(4.9-8.4bar)AirConsumption(60cyclespermin.):11.4scfmAirInlet:3/8"NPTToolWeight:11.5lbs(5.24kg)Height:16.5"(418mm)Length:13.25"(338mm)Width:6"(153mm)

FastenerCapacity:225-300Shank:.099"-.148"Range:2¼"–4"Collation:15˚angular,flatwirewoundcoil

5 1⁄8" Coil Nailer

Forfastenersseep.49-50SeriesHK,HL,HD,KD,MD,MP

Applications TrussAttachment,HeavyDutyFraming,EngineeredLumber,DocksandCommercialApplication.

Features• IncludesheavydutythreadedT-handleforusewhenappropriate,orremovalwhennotdesired

• Flexiblecollationdeflectoranddustguardforimprovedsafetyincommercialenvironments

• Strengtheneddriverandbumperforextendeduse and reliable service


SpecificationsItem#:5M0001NSequentialactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):11.4scfmAirInlet:3/8"NPTToolWeight:13lbs(5.9kg)Height:18"(57mm)Length:13"(330mm)Width:6.6"(168mm)

FastenerCapacity:120-225Shank:.120"-148"Range:3"–51⁄8"Collation:15˚angular,flatwirewoundcoil

COIL NAILERS

2BT (.099)

Fastener Speci�cations: Full Ring Shank Coil Nail: .099" x 2¼” Item Code Diameter Wound/Shank Length Point Finish Coating Features M/Box Wt/Box BT21APBF .099 Coil, angular, �at wound 2 Diamond Bright Basic. Sencote Unique ring shank design 6.6 30.5 lbs

• Its’uniqueringshankdesignvirtuallyeliminatesthepossibilityofthenail“backingout”offloordeckingmaterial,evenifthefloorjoistismissed!Thenail’sringshankdesignissogoodthatwe’vehaditpatented,soproblemscommonlyassociatedwithimproperlyfastenedfloorswillbeathingofthepast.Theseinclude:squeakyfloorsduetothedeckingmaterialnotbeingfastenedtothefloorjoist,humpsinthefloor,theresultofa“deadboard”notbeingpulleddownagainstthefloorjoist.Raisedfastenersthatcouldeventuallypopthroughlinoleumorvinylfloorcovering.Withtheseproblemsminimized,youcanexpecttoexperienceareductioninthenumberofservicecall-backs.

Features and Benefits:

• UsedinSENCO’sstandardSCN60nailer

• Superiorwithdrawalresistance.ThefullringshanknailandtwoSENCOfastenerscommonlyusedintheindustry(theQ19BRBandBL21BPB)weretestedin-houseforwithdrawalstrength,usingthreedifferenttypesofdeckingmaterialandtwotypesofglue.Thefullringshanknail’sperformancewassuperiortotheothertwoinallcategories.

• Ithasbetterpull-downpower.Asaresult,theoperatornolongerhastosteponthedeckingmaterialandholditdown,asiscommonlydonewithstaples,whenfasteningthedeckingmaterialtothefloorjoistwiththeBT21APBF.

24

SENCO’s BT21APBF Coil Flooring NailsSuperior to any fastener currently being used in manufactured housing floor applications.

Idle boasting? Absolutely not! The BT21APBF has been tested and proven under actual plant conditions.

COIL NAILERS


25

APPLICATIONS SCN65XP SCN60XP SCN49 PAL57F PAL70 PAL100 PAL130

Pallets X X X X X X X

Packaging X X X X X X X

Crates/Boxes X X X X X X X

CartontoSkid X X X X

Framing/Sheathing X X X X X X

Subfloor/Decking X X X X X X X

Underlayment X X X X X X X

CementBoard X

Siding X X

FenceBoards X X

WoodShakes X

FEATURES

FastenerRange 2"-3½" 2"-2¾" 1¼"-2½" 1"-2¼" 1¾"-2¾" 2¼"-4" 3"-51⁄8"

Shank .099"-.131" .099"-.113" .082"-.113" .082"-.092" .092"-.013" .099"-.148" .120"-.148"

FastenerCapacity 225-275 250-275 250-375 300-350 250-300 225-300 120-225

Weight 8.0lbs 7.5lbs 5.1lbs 5.8lbs 7.9lbs 11.5lbs 13.0lbs

Height 14.1" 12.4" 12.0" 11.25" 12.25" 16.5" 18.0"

Length 12.9" 12.9" 12.25" 11.9" 13.25" 13.25" 13.0"

Depth-of-Drive X X X

JamEZ-Clear X X X X X X X

TriggerActuation* S,C C Sel. C C C S,C

Exhaust Adj. Adj. Adj. Adj. Fixed Fixed Fixed

Warranty 5yrs 5yrs 1yr 1yr 1yr 1yr 1yr

SCN65XP SCN60XP SCN49 PAL57F PAL70 PAL100 PAL130

* Trigger Actuation availability - S: Sequential C: Contact Sel: Selectable

COIL NAILERS

26

22-20 Ga. 3⁄16", 3⁄8", ½" Crowns, 5⁄8" Fine Wire Staplers

ForFastenersseep.53-54SeriesA,B,C,D,E,F,G

E

DA3⁄ 16

3⁄ 16

3⁄ 16

5⁄ 8

5⁄ 8

5⁄ 8

5⁄ 8

5⁄ 323 ⁄ 8

3 ⁄ 8

3 ⁄ 8

3 ⁄ 8

22 Gauge

¼

20 Gauge

B

½

½

C

G

¼

¼

¼

F

½

½

½

SFW10XP Various SFW10XP models drive staples ranging in length from 5⁄32" to 5⁄8" and crowns from 3⁄16", 3⁄8" and 1⁄2".

SENCO has three categories of staplers; Fine, Medium and Heavy Wire. For upholstery, felt insulation, shoe making, dust cover, roof shingles and felt, spring attachments, insulating sheathing, underlayment, hardwood floors, drawers, sheathing, siding, wood shakes, manufactured housing, packaging, furniture frames, subflooring, pallets and box assemblyAvailable with staples from 22 -15 Gauge.

ApplicationsUpholstery,furnitureassembly,cabinets,automotivevinylroofsandinteriortrim,bedding,TVandstereogrillcloth,pictureframes,shoemaking,moldingandroofingfelt.

Features• Full1"liplength• Roundedsteelcap–won’tharmfabric• Rearexhaust–keepsoilofffabric• BothU.S.andmetricskirtguidecastintooutermagazine

• Nofrontscrewheads–toolglidesthroughfabric• Compacttooldesign• Reloadwindowindicateswhentoreloadfasten-

ers• 5-yearlimitedwarranty

SpecificationsItem#:SeebelowReg.OperatingPressure:60-95psi(4.1-6.5bar)AirConsumption(60cyclespermin.):.77scfmAirInlet:1/4"NPTToolWeight:2lbs(0.9kg)Height:5.8"(151mm)Length:9.5"(241mm)DoubleLengthMagazine:14.5"

FastenerCapacity:110-185Gauges:20–22Range:5/32"-5/8"Crowns:3/16",3/8",1/2"Collation:Straightgluedstrip

SFW10XP Standard Length Magazines Model Crown Staple Range Item #SFW10XP-A/D 3⁄16" 3⁄16"–3⁄16" 1D0101NSFW10XP-B 3⁄16" 1⁄4"–½" 1D0141NSFW10XP-C 3⁄8" 3⁄8"–5⁄8" 1D0121NSFW10XP-E 3⁄16" 3⁄8"–5⁄8" 1D0111NSFW10XP-F ½" 1⁄4"–½" 1D0151NSFW10XP-G 3⁄16" 1⁄4"–5⁄8" 1D0131N

STAPLERS

27

20 Ga. 7⁄16" Crown, 5⁄8" Fine Wire Stapler

ForFastenersseep.54SeriesH

ForFastenersseep.53-54SeriesB,C,F

3⁄8

5⁄8

¼

H

7⁄16

SFT10-HThe SFT10-H Fine-Wire Stapler is extremely fast, well balanced, lightweight and powerful.

ApplicationsFor application of roof felt, tar paper, house wrap, and paper-backed insulation.

Features• Highloadcapacity–235staples• FastandPowerful• Ultra-lightandbalancedat3.2lbs.• Carbidetipsonguidebodyincreasedurability• Easybottomloadingmagazine• Rearexhaust• 1-yearlimitedwarranty

¼

L

15⁄8

3⁄8

SFW09Compact and durable, the SFW09 fine-wire stapler will handle any upholstery task with ease. With all-metal construction and a smooth profile, this tool works all day, everyday and won't snag or scuff fabric.

5⁄ 8

5⁄ 323 ⁄ 8

22 Gauge

¼

20 Gauge

B

½

½

C

¼

F

½

½

SpecificationsItem#:480018NReg.OperatingPressure:75-100psi(5.21-6.9bar)AirInlet:1/4"NPTToolWeight:3.2lbs(1.4kg)Height:6.5"(165mm)Length:14.4"(368mm)

FastenerCapacity:235Gauge:20Range:¼"-5 ⁄8"Crown:7⁄16"Collation:Straightgluedstrip

18 Ga. ¼" Crown, 15⁄8" Medium Wire Stapler

Forfastenersseep55SeriesL

ApplicationsCabinets,soffit,fascia,drawerassembly,pictureframes,casebacks,craftassembly

Features• Magnesiummainbody-durable&ultra-light• Metalcylinderforincreaseddurability• Oilfreedesign• Adjustabledepth-of-drive• Selectiveactuationtrigger• Rotatablerearexhaustandbelthook• Swivelairplug• Over-moldrubbercomfortgrip• Includescaseandwrench• 1-yearlimitedwarranty

SpecificationsItem#:1W0021NSelectableactuationtriggerReg.OperatingPressure:75-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):2.4scfmAirInlet:1/4"NPTToolWeight:2.6lbs(1.8kg)Height:9.5"(241mm)Length:10.25"(260mm)Width:2.5"(63.5mm)

FastenerCapacity:110Gauge:18Range:3⁄8"-15⁄8"Crown:¼"Collation:Straightgluedstrip

NEW SLS18MgThe SLS18Mg's magnesium body delivers an ultra-light tool. Selectable trigger lets you choose between high productivity or precision placement.

20-22 Ga. 3⁄8" - ½" Crowns, 5⁄8" Fine Wire StaplersApplicationsUpholsteringoperations,furnitureassembly,cabinets,automotivevinylroofsandinteriortrim,beddingmanufacture,TVandstereogrillcloth,pictureframes,shoemaking,molding,housewrap,androofingfelt. Features• Full1"liplength-makesgettingintotightspots

easier• Roundedsteelcap-won'tsnagfabric• Rearexhaust-keepsoilofffabric• Rearmagazinebumper-protectsfabric• Comfortgrip-reducesfatigue• 1-yearlimitedwarranty

SpecificationsItem#:SeebelowReg.OperatingPressure:60-95psi(4.1-6.5bar)AirConsumption(60cyclespermin.):.77scfmAirInlet:1/4"NPTToolWeight:2.1lbs(0.95kg)Height:6"(152mm)Length:9.25"(235mm)

FastenerCapacity:110-168Gauge Crown Wire Item# 22 1/2 B 4C0012N 22 3/8 C 4C0001N 20 1/2 F 4C0041N

STAPLERS

28

L

1½

¼

1½

3 ⁄8 3 ⁄8

3 ⁄8

M

¼ 3⁄8 7⁄16

7⁄8

1½

NL M

–

–¾

1½–

–7⁄8

1½–

–

18 Gauge 16 Gauge

ApplicationsDrawers,casebacks,cabinetframeassembly,underlaymentsheathing,paneling,molding/trim,soffits,prefinishedgypsumandsidingforon-siteandmanufacturedhousing.

Features• Ultra-light(2.67lbs.)foreaseofhandling• Ergonomicallydesignedwithcomfort-grip• Adjustabledepth-of-drive• Heavydutycomponents,includinganaluminumsleeveandpiston,ruggeddurabilityeveninhighvolumeproductionenvironments

• NeverLube®design• 5-yearlimitedwarranty

SpecificationsItem#:SLS25XP-L:820103NContactactuationtrigger SLS25XP-M:820107NContactactuationtrigger(IsavailablewithSequentialactuationtrigger)Reg.OperatingPressure:75-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):1.92scfmAirInlet:1/4"NPTToolWeight:2.67lbs(1.21kg)Height:9"(229mm)Length:12"(305mm)Width:2"(51mm)

FastenerCapacity:168Gauge:18,Crowns:¼"or3⁄8"Range:3⁄8"-1½"Collation:Straightgluedstrip

18 Ga. ¼", 3⁄₈" Crowns, 1½" Medium Wire Staplers

Forfastenersseep.55-56SeriesL,M

SLS25XPHas the power to drive 1½" staples into hard woods.

Forfastenersseep.55-57SeriesL,N,M

ApplicationsDrawerassembly,cabinets,cornerandglueblockfastening,andspringclipattachmentinfurnitureassembly,doorsandwindowcasings,trim,andmoldings.On-siteconstructionusesforaluminumandvinylsiding,underlayment,andattachmentofroofingsheathinganddeckingmaterials.

Features• E-ZLoad,EZ-Clear™system• Only2movingO-rings-lessmaintenance• Quietoperation• Long1"liptogetintotightspots• NeverLube®design• 5-yearlimitedwarranty

SpecificationsItem#: SKSXPL11-17:300120N SKSXPM12-17:300152N SKSXPN12-17300184NReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):2.16scfmAirInlet:1/4"NPTToolWeight:4.2lbs(1.9kg)Height:9.25"(238mm)Length:12.38"(314mm)

FastenerCapacity:145+Gauge:18or16Range:¾"-1½"Crowns:¼",3⁄8",7⁄16"Collation:Straightgluedstrip

18 -16 Ga. ¼", 3⁄8", 7⁄16" Crowns, 1½" Medium-Heavy Wire Stapler

SKSXPSKSXP is available for use in a wide variety of wood-working applications. It is offered in 18 and 16 gauge and 3 different crown widths in staple lengths up to 1½".

K R

½

1 1⁄8

¼

¼

L

3⁄8

3⁄16

5⁄8

1 1⁄8

M

1½ 1½

3⁄8

3⁄ 8

19 Gauge

18 Gauge

ApplicationsUpholstery,furnituremanufacturing,cabinetframeassembly,underlaymentsheathing,paneling,mold-ing/trim,soffits,pre-finishedgypsum,andsidingforon-siteandmanufacturedhousing.

Features• Ultra-light(2.5lbs.)foreaseofhandling• NeverLube® design• Ergonomicallydesignedwithcomfort-grip• Adjustabledepth-of-drive• No-Marpad• NeverLube®designmeanseasiermaintenance

and no lubrication to stain fine wood• 5-yearlimitedwarranty

SpecificationsItem#:SLS20XP-K:490101N SLS20XP-L:490103N SLS20XP-LW/Case:490105N SLS20XP-LSencomatic:490015N SLS20XP-M:490107N SLS20XP-R:490111NSequentialactuationtriggersReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):1.92scfmAirInlet:1/4"NPTToolWeight:2.5lbs(1.13kg)Height:8.5"(216mm)Length:12"(305mm)

FastenerCapacity:168,Gauge:18Range:3⁄8"-1½"Crowns:3⁄16",¼",3⁄8"Collation:Straightgluedstrip

19-18 Ga. 3⁄16", ¼", 3∕8" Crowns, 1½" Fine & Medium Wire Staplers

Forfastenersseep.55-56SeriesK,L,M,R,WSLS20XPThe ergonomically designed SLS20XP increases quality and productivity in a wide variety of applications.

STAPLERS

29

¾

1½

P

1

5⁄8

1½

P

1


16 Ga. 1" Wide Crown, 1½" Heavy Wire StaplerSpecificationsItem#:4Y0001NContactactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):3.45scfmAirInlet:3/8"NPTToolWeight:5.3lbs(2.4kg)Height:10"(254mm)Length:15.25"(387mm)Width:3.5"(89mm)

FastenerCapacity:160Gauge:16Range:7⁄8"-2"Crown:1"Collation:Straightgluedstrip

ApplicationsWirelathing,corrugatedcartontoskid,furniture/cabinetframes,andbutt-joints.Alsocapableofhandlingasphaltroofshinglesandattachingfoaminsulationboard. Features• Five-yearlimitedwarranty• Robustfiringvalvedesignmakesthetoolfast

andpowerful• Positive-lockingadjustabledepthofdrive• EZclearlatchprovideseasyaccesstoclearfasteners

• High-strengthcompositemagazineandmetalmagazineguidepreventswear

• Large3/8”inletforincreasedairflowduringhighvolume usage

• Durabledeflectorcapforsuperiorimpactresistance WC200XP

This heavy-duty wide crown stapler is capable of handling a wide variety of applications. Constructed of durable, high-quality, high-strength materials, the WC200XP is designed for extreme performance and long life. It is also light and well-balanced to minimize operator fatigue.

7⁄8

2

P

1

16 Ga. 1" Wide Crown, 1½" Heavy Wire Stapler


ApplicationsForbuttjoints,lathing,insulation,andbeltlineattachmentonmobilehomes.Feltapplications&foaminsulationinbuildingconstruction.Corrugatedcartontoskid,furniture&cabinetframes.

Features• Highloadcapacity(140plusstaples)• Specialwearplateandhardenedsafety• EZ-Clear™latchprovidesquickandeasyclearing

ofoccasionaljams• 5-yearlimitedwarranty

SpecificationsItem#:120120NContactactuationtrigger.OperatingPressure:80-110psi(4.8-8.3bar)AirConsumption(60cyclespermin.):3.7scfmAirInlet:3/8"NPTToolWeight:6.5lbs(3kg)Height:9.75"(247mm)Length:12.5"(317mm)

FastenerCapacity:140+Gauge:16Range:3/4"-1½"Crown:1"Collation:Straightgluedstrip


16 Ga. 1" Wide Crown, 1½" Heavy Wire StaplerSpecificationsItem#:4W0001NContactactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirConsumption(60cyclespermin.):3.18scfmAirInlet:3/8"NPTToolWeight:5lbs(2.3kg)Height:9"(229mm)Length:15.25"(387mm)Width:3.5"(89mm)

FastenerCapacity:160Gauge:16Range:5⁄8"-1½"Crown:1"Collation:Straightgluedstrip

ApplicationsWirelathing,corrugatedcartontoskid,butt-jointsandfurniture/cabinetframesandattachingfoaminsulationboard. Features• Lightweight5.0pounds• Robustfiringvalvedesignmakesthetoolfast,powerful,efficientandeasytomaintain

• Positive-lockingadjustabledepth-of-driveensuresconsistentlyflushdrives

• EZ-Clear™virtuallyeliminatesdowntimecausedbyfastenerjams.


MWXPThe MWXP is a proven workhorse with impressive power and unrivaled durability. Has excellent power and speed to handle the most demanding applications.

WC150XPThis heavy-duty wide crown stapler is capable of handling a variety of applications. Constructed of durable, high-quality, high-strength materials, the WC150XP is designed for extreme performance and long life.

STAPLERS

30

2

1

N

7⁄16

2

1

N

7⁄16

2

N

1

7⁄16

16 Ga. 7⁄16" Crown, 2" Heavy Wire Stapler

Forfastenersseep.57SeriesN

ApplicationsSheathing,subflooring,furnitureframing,fasciaandsoffits,lathing,fencing,cedarshingles,boxes,crates,palletsandpalletrepair. Features• MagnesiumMainBody-reducedweightforlessoperatorfatigue

• Adjustabledepth-of-drive• Moldedcomfortgrip,360°adjustableexhaust,

and overmold trigger• EZ-Clear™latch• Includescase• 5-yearlimitedwarranty

SpecificationsItem#:3B0101N:ContactactuationtriggerReg.OperatingPressure:80-120psi(5.5-8.3bar)AirConsumption(60cyclespermin.):6.3scfmAirInlet:3/8"NPTToolWeight:4.5lbs(2kg)Height:11"(279mm)Length:15"(381mm)Width:3.24"(82mm)

FastenerCapacity:160Gauge:16Range:1"-2"Crown:7⁄16"Collation:Straightgluedstrip

SNS44XPPower, speed and balance, designed for construction, remodeling and in-plant industrial.


16 Ga. 7⁄16" Crown, 2" Heavy Wire StaplerApplicationsSheathing,sub-flooring,fasciaandsoffits,aluminumandvinylsiding,cedarshingles,furring,ridgebeamassembly,andmetaltiedownstraps,crate-boxassemblyandlightfurnitureframing. Features• Durableconstruction,minimizesdowntimeandoperatingcosts

• Adjustabledepth-of-drive• EZ-Clear™latch• Comfortgriphandle• Reloadindicator• 5-yearlimitedwarranty

SpecificationsItem#: 580101N:ContactactuationtriggerReg.OperatingPressure:80-120psi(5.5-8.3bar)AirConsumption(60cyclespermin.):5.52scfmAirInlet:3/8"NPTToolWeight:5.1lbs(2.3kg)Height:11"(279mm)Length:14"(356mm)Width:3.5"(90mm)


SNS45XPIt's fast, multi-directional stitching is a major benefit in applications like ridge beams and all types of sheathing.



ApplicationsSheathing,sub-flooring,fasciaandsoffits,aluminumandvinylsiding,cedarshingles,furring,ridgebeamassembly,andmetaltiedownstraps,crate-boxassemblyandlightfurnitureframing. Features• Durableconstruction,minimizesdowntimeandoperatingcosts

• Adjustabledepth-of-drive• EZ-Clear™latch• Comfortgriphandle• Reloadindicator• 1-yearlimitedwarranty

SpecificationsItem#:3L0003N:ContactactuationtriggerReg.OperatingPressure:80-120psi(5.5-8.3bar)AirConsumption(60cyclespermin.):5.4scfmAirInlet:3/8"NPTToolWeight:4.6lbs(2.1kg)Height:10.75"(273mm)Length:15"(381mm)


SNS41Fast, multi-directional stitching is a major benefit in applications like ridge beams and all types of sheathing.

STAPLERS

31

2

N

1¼

7⁄ 16

Q

1¼

7⁄16

2½

15 Ga. 7⁄16" Crown, 2½" Heavy Wire Stapler


Forfastenersseep.58SeriesQ

ApplicationsFraming,decking,furnitureframes,furring,roofdeck, sidewall sheathing, subflooring, window units,crateandboxassembly,boxes,crates,palletsandpalletrepair. Features• Adjustablepower-canincrease20%• Ruggedconstruction• Fast-upto15staplespersecond• Adjustabledepth-of-drive• EZ-Clear™latch• Toploadingwithreloadindicators• Adjustableexhaust• 5-yearlimitedwarranty

SpecificationsItem#:750101N:ContactactuationtriggerReg.OperatingPressure:80-120psi(5.5-8.3bar)AirConsumption(60cyclespermin.):6.54scfmAirInlet:3/8"NPTToolWeight:5.9lbs(2.7kg)Height:12"(305mm)Length:14.38"(365mm)Width:3.6"(92mm)

FastenerCapacity:160Gauge:16Range:1¼"-2"Crown:7⁄16"Collation:Straightgluedstrip

ApplicationsFraming,decking,furnitureframes,furring,sidewallsheathing,subflooring,windowunits,crateandboxassembly,boxes,crates,palletsandpalletrepair. Features• Ruggeddependability• Fast-upto15staplespersecond• Adjustabledepth-of-drive• Allthefeaturesyouwant,includingadjustablepowerforsofterdrives

• EZ-Clear™latch• Adjustableexhaust• 5-yearlimitedwarranty

SpecificationsItem#:660101N:ContactactuationtriggerReg.OperatingPressure:80-120psi(5.5-8.3bar)AirConsumption(60cyclespermin.):6.54scfmAirInlet:3/8"NPTToolWeight:5.9lbs(2.7kg)Height:12"(305mm)Length:14.38"(365mm)Width:3.6"(92mm)

FastenerCapacity:130Gauge:15Range:1¼"-2½"Crown:7⁄16"Collation:Straightgluedstrip

Forfastenersseep.57SeriesNSNS50XPHas all the power and speed needed for the toughest 16 gauge staple applications

SQS55XPHas the power and speed needed for the toughest framing and sheathing applications. Designed with today’s harder woods and laminates in mind.

STAPLERS

32


APPLICATIONS SFW10XP SFW09 SFT10 SLS18Mg SLS20XP SLS25XP SKSXP MWXP WC200XP WC150XP SNS41 SNS44XP SNS45XP SNS50XP SQS55XPUpholstery X X X Shoemaking X X X Casebacks X X X X X X X Trim&molding X X X X X X Cabinets&drawers X X X X X X X X X X XPictureframes X X X X X X Furnitureframes X X X X X X X X X X XUnderlayment X X X X X X X X X X XDecking X X X X X X X X XFascia&soffits X X X X Feltinsulation X X X Insulativesheathing X X X Window&doorunits X X X X X X X X XSiding X X X X X X X XFencing X X X X X X X X XWoodShakes X X X X X XFraming&sheathing X X X X XLathing X X X X Packaging X X X X X X X X X X XPallets X X X X X XFEATURESFastener Range 5⁄32"-5⁄8" 5⁄32"-5⁄8" ¼"-5⁄8" 3⁄8"-15⁄8" 3⁄8"-1½" 3⁄8"-1½" ¾"-1½" ¾"-1½" 7⁄8"-2" 5⁄8"-1½" 1"-2" 1"-2" 1"-2" 1¼"-2" 1¼"-2½"Crown 3⁄16",3⁄8",½" 3⁄8",½" 7⁄16" ¼" 3⁄16",¼",3⁄8" ¼",3⁄8" ¼",3⁄8",7⁄16" 1" 1" 1" 7⁄16" 7⁄16" 7⁄16" 7⁄16" 7⁄16"Gauge 22-20 22-20 20 18 19,18 18 18-16 16 16 16 16 16 16 16 15FastenerCapacity 110-185 110-168 235 110 168 168 145+ 140+ 160 160 160 160 160 160 130Weight 2.0lbs 2.1lbs 3.2lbs 2.6lbs 2.5lbs 2.7lbs 4.2lbs 6.5lbs 5.3lbs 5lbs 4.6lbs 4.5lbs 5.1lbs 5.9lbs 5.9lbsHeight 5.8" 6.0" 6.5" 9.5" 8.5" 9.0" 9.25" 9.75" 10" 9" 10.75" 11.0" 11.0" 12.0" 12.0"Length 9.5" 9.25" 14.4" 10.25" 12.0" 12.0" 12.38" 12.5" 15.25" 15.25" 15.0" 15.0" 14.0" 14.38" 14.4"BeltHook X X X DepthofDrive X X X X X X X X X XJamEZClear X X X X X X X X X X X X XTriggerActuation* C,Sen. C,Sen. Sel. Sel. S,C,Sen. S,C C S,C C C C S,C S,C C CNeverNever-Lube/No-oilDesign X X X XExhaust Rear REAR Rear RearAdj. Capfixed Capfixed Capfixed Capfixed Capfixed Capfixed Adjustable Adjustable Adjustable Adjustable RearWarranty 5yrs 1yr 1yr 1yr 5yrs 5yrs 5yrs 5yrs 5yrS 5yrs 1yr 5yrs 5yrs 5yrs 5yrs SFW10XP SFW09 SFT10 SLS18Mg SLS20XP SLS25XP SKSXP MWXP WC200XP WC150 XP SNS41 SNS44XP SNS45XP SNS50XP SQS55XP

* Trigger Actuation availability - S: Sequential C: Contact Sel: Selectable Sen: Sencomatic

33

APPLICATIONS SFW10XP SFW09 SFT10 SLS18Mg SLS20XP SLS25XP SKSXP MWXP WC200XP WC150XP SNS41 SNS44XP SNS45XP SNS50XP SQS55XPUpholstery X X X Shoemaking X X X Casebacks X X X X X X X Trim&molding X X X X X X Cabinets&drawers X X X X X X X X X X XPictureframes X X X X X X Furnitureframes X X X X X X X X X X XUnderlayment X X X X X X X X X X XDecking X X X X X X X X XFascia&soffits X X X X Feltinsulation X X X Insulativesheathing X X X Window&doorunits X X X X X X X X XSiding X X X X X X X XFencing X X X X X X X X XWoodShakes X X X X X XFraming&sheathing X X X X XLathing X X X X Packaging X X X X X X X X X X XPallets X X X X X XFEATURESFastener Range 5⁄32"-5⁄8" 5⁄32"-5⁄8" ¼"-5⁄8" 3⁄8"-15⁄8" 3⁄8"-1½" 3⁄8"-1½" ¾"-1½" ¾"-1½" 7⁄8"-2" 5⁄8"-1½" 1"-2" 1"-2" 1"-2" 1¼"-2" 1¼"-2½"Crown 3⁄16",3⁄8",½" 3⁄8",½" 7⁄16" ¼" 3⁄16",¼",3⁄8" ¼",3⁄8" ¼",3⁄8",7⁄16" 1" 1" 1" 7⁄16" 7⁄16" 7⁄16" 7⁄16" 7⁄16"Gauge 22-20 22-20 20 18 19,18 18 18-16 16 16 16 16 16 16 16 15FastenerCapacity 110-185 110-168 235 110 168 168 145+ 140+ 160 160 160 160 160 160 130Weight 2.0lbs 2.1lbs 3.2lbs 2.6lbs 2.5lbs 2.7lbs 4.2lbs 6.5lbs 5.3lbs 5lbs 4.6lbs 4.5lbs 5.1lbs 5.9lbs 5.9lbsHeight 5.8" 6.0" 6.5" 9.5" 8.5" 9.0" 9.25" 9.75" 10" 9" 10.75" 11.0" 11.0" 12.0" 12.0"Length 9.5" 9.25" 14.4" 10.25" 12.0" 12.0" 12.38" 12.5" 15.25" 15.25" 15.0" 15.0" 14.0" 14.38" 14.4"BeltHook X X X DepthofDrive X X X X X X X X X XJamEZClear X X X X X X X X X X X X XTriggerActuation* C,Sen. C,Sen. Sel. Sel. S,C,Sen. S,C C S,C C C C S,C S,C C CNeverNever-Lube/No-oilDesign X X X XExhaust Rear REAR Rear RearAdj. Capfixed Capfixed Capfixed Capfixed Capfixed Capfixed Adjustable Adjustable Adjustable Adjustable RearWarranty 5yrs 1yr 1yr 1yr 5yrs 5yrs 5yrs 5yrs 5yrS 5yrs 1yr 5yrs 5yrs 5yrs 5yrs SFW10XP SFW09 SFT10 SLS18Mg SLS20XP SLS25XP SKSXP MWXP WC200XP WC150 XP SNS41 SNS44XP SNS45XP SNS50XP SQS55XP

* Trigger Actuation availability - S: Sequential C: Contact Sel: Selectable Sen: Sencomatic

STAPLERS

34

Y05

Y07

Y09

9⁄16

7⁄16

7⁄16

7⁄16

7⁄16

5⁄16

X04

X06

X08

__3⁄ 8

__½

__¼

1

1

1

SC1XP Senclamp®This unique system clamps material together, holding and supporting it for the life of the product you manufacture.

SC2 Sencor®The versatile SC2 tool drives three sizes of fasteners for stronger joints and fewer assembly operations.

Vinyl Siding Attachment for RoofPro™455XP


TransformtheRoofPro™455XPCoilNailer(page19)intoaVinylSidingNailer.

SpecificationsPart#MA0013Includesvinylsidingattachmentandtwomount-ing screws

.120HMM00

__1¼

__1

__1¾

.120

_¾

Listed

FastenerGauge:11(.120")(3.0mm)Range:¾"–1¾"smoothandring,Collation:Angular,flatwirewoundcoil

Part#MA0013

MA0013 Vinyl Siding AttachmentConvert your RoofPro™455XP to a vinyl siding nailer. Order part # MA0013 and within minutes your ready to install siding.

ApplicationsDesignedtodoawiderangeofwoodfasteningapplicationssuchasbuttjoints,cabinets,caskets,curios,mirrorandpictureframesbetter,fasterandcheaper.

Features• Senclampfastenerspullthejointtogetherduringdrivingforatight,permanentfit

• Eliminatemilling,doweling,clamping,screwingandothertime-consuming,costaddingoperations

• TheSenclamphigh-carbonsteelfastenerderivesaddedstrengthfromitsspecialwebbeddesign


SpecificationsItem#:220101NSequentialactuationtriggersReg.OperatingPressure:80-110psi(5.5-7.5bar)AirConsumption(60cyclespermin.):3.8scfmAirInlet:3/8"NPTToolWeight:6.3lbs(2.8kg)Height:9.8"(249mm)Length:12.7"(322mm)

FastenerCapacity:120Gauge:25Range:5⁄16"-9⁄16"Crown:7⁄16"Collation:Straightgluedstrip

25 Ga. 1" Crown, ½" Corrugated FastenerApplications Designedtodobuttjoints,cabinets,caskets,curios,mirrorandpictureframes,palletsandpalletrepair,trusses,crateandboxassemblybetter,fasterandcheaper.

Features• Addedstrengthforlargerbuttjoints• Powerfulforhardanddensematerial• Eliminategluing,milling,doweling,screwingandclamping

• Sencor®corrugatedfastenersprovidetwicethejointstrengthofordinaryfasteners


SpecificationsItem#:470001NSequentialactuationtriggerReg.OperatingPressure:80-110psi(5.5-7.5bar)AirConsumption(60cyclespermin.):3.7scfmAirInlet:3/8"NPTToolWeight:6.9lbs(3.1kg)Height:9.44"(240mm)Length:12.5"(318mm)FastenerCapacity:80

FastenerGauge:25Range:¼"-½"Crown:1"Collation:Straightgluedstrip

25 Ga. 7⁄16" Crown, 9⁄16" Senclamp® Fastener

ForFastenersseep.59SeriesY

Forfastenersseep.59SeriesX

SPECIALTy TOOLS

RW17

RW19

RW21

.063 .063 .063

_1½

_1¾

_2

RW17

RW19

RW21

.063 .063 .063

_1½

_1¾

_2

__1

R13R11

__¾

R10

__5⁄8

3⁄163⁄16

3⁄16

35

SLS20XP-HFThe lightweight tongue-and-groove installation stapler drives perfect 45° angle staples every time and eliminates tongue splitting and floor surface damage. Adjusts to different floor thicknesses.

2" Manual Mallet Actuated Hardwood Flooring Nailer

Forfastenersseep.59SeriesRW

2" Pneumatic Mallet Actuated Hardwood Flooring Nailer

ApplicationsFortheinstallationof1/2"(12mm)to33/32"(26mm)hardwoodflooring.(1/2"applicationsrequireoptionaladapter.)

Features• Drivescleatnailsatanideal45°angle• Cleatnailsminimizewoodsplittingandallow

forexpansionandcontractionofflooringmaterials.

• Ratchetdrivesystemallowscleatstobedrivenwithmultipleblows

• Malletactuated(malletincluded)• Ergonomicallydesignedforimprovedproduc-

tivity,lessfatigueandeaseofoperation• 1-yearlimitedwarranty

SpecificationsItem#:730001NToolWeight:7.6lbs(3.45kg)Height:17.75"(451mm)Length:14.4"(365mm)

FastenerCapacity:110Range:1½",1¾"and2"Collation:StraightstripLtypecleatnails

ApplicationsFortheinstallationof1/2"(12mm)to33/32"(26mm)hardwoodflooring.(1/2"applicationsrequireoptionaladapter.)

Features• Easyonthearm,requiringasinglestrikeofonly4lbsofswingweighttodrivefastener.

• Mallet-actuatedfiringsimultaneouslysetsfloorboards(tongueintogroove)anddrivescleatnailsatanideal45°angle


SpecificationsItem#:710001NReg.OperatingPressure:70-120psi(4.8-8.3bar)AirInlet:3/8"NPTToolWeight:12lbs(5.5kg)Height:17.75"(451mm)Length:16.25"(413mm)

FastenerCapacity:110Range:1½",1¾"and2"Collation:StraightstripLtypecleatnails

19 Ga. 3⁄16" Crown, 1" Hardwood & Laminate Floor StaplerApplications For1/4",5/16",and3/8"thicksolidhardwoodandhardwoodlaminatefloors.

Features• Frontblockeasilyadjuststofloorthickness• Industry-exclusivesafetycontrolsstapleplace-

ment• Poweradjustedmotordrivesstaplestoconsistentandcontrollabledepth

• Softrubberpalmpadforcomfortablegrip• Weighsjust2.15lbs.• NeverLube®design• 5-yearlimitedwarranty

SpecificationsItem#:490021NSequentialactuationtriggerReg.OperatingPressure:70-120psi(4.8-8.3bar)AirInlet:1/4"NPTToolWeight:3.2lbs(1.5kg)Height:9"(228mm)Length:13"(332mm)Width:3"(76mm)

FastenerCapacity:168Gauge:19Range:5⁄8"-1"Crown:3⁄16"Collation:Straightgluedstrip

ForFastenersseep.59SeriesR

SHF15 SHF15 is a multiple-hit tool with ample power to set nails. Nails not fully driven by the first blow remain positively positioned for additional strikes. Composite base eliminates scratching and damage to wood floor surface.

SHF50The industry's only pneumatic hardwood flooring nailer with a work contact safety, which is activated when the tool is positioned on the flooring tongue - not by depressing a trigger. Forfastenersseep.59SeriesRW

SPECIALTy TOOLS

36

F

5⁄16

½

½

7⁄16

3⁄8

5⁄8

J

DFP Clinch ToolD Series Staplers are designed for packaging applications. Used wherever two materials must be stapled and clinched together. Forfastenersseep.54SeriesF

20 Ga. ½" Crown, ½" Staple Clinch ToolApplicationsUsedwherevertwomaterialsmustbestapledandclinchedtogether.Corrugatedboxfabrication,lightassemblyandpackaging,shoemaking,attachingwoodenorsteelshanks,uppertoinsoles,vamps,straps,ornaments,andbuckles.

Features• Dependabletime-testeddesign• Greatforhand-heldormountedapplications• 1-yearlimitedwarranty

SpecificationsItem#:030002NSequentialactuationtriggerReg.OperatingPressure:70-90psi(4.6-8bar)AirInlet:1/4"NPTToolWeight:2.7lbs(1.2kg)Height:7.75"(197mm)Length:8"(203mm)

FastenerCapacity:112Gauge:20Range:5⁄16"-½"Crown:½"Collation:Straightgluedstrip

18 Ga. 7⁄16" Crown, 5⁄ 8" Staple Clinch Tool

Collated Joist Hanger Nailers

ApplicationsFSeries:Forstaplingbedding,recessed-endpackaging,preassemblysetup,boxes,anddisplays.Asacutting-roomstaplerforshoemaking,itfastensmaterialupto20-ply.

Features• Dependabletime-testeddesign• Greatforhand-heldormountedapplications• 1-yearlimitedwarranty

ApplicationsJoisthangers,foundationanchors,seismicandhurricanestrapsandties,postcapsandbass,plusmanyothermetalframinghardware.Features• Simpleandfastoperation–saveshoursover

hand nailing• Smallsizeforaccessandmaneuverability• Lightweight.-meanslessfatiguethanhand

nailing• Nailpointprotrudessonailsgointheholeeverytime

• Easyrearloadmagazinewithloadandcockoperation

• Durablecomfortgripreducesworkerfatigue• Belthookincluded• Includescase,fitting,wrenches,andoil• 1yearwarranty

SpecificationsItem#: F75SisalAnvil:040003N Sequentialactuationtrigger F75LongReachAnvil:040004N SequentialactuationtriggerReg.OperatingPressure:70-90psi(4.6-8bar)AirInlet:1/4"NPTToolWeight:4.2to4.4lbs(2.0kg)Height:10.5"(266mm)Length:15.5"(396mm)LipLength:1/2”(13mm)JawOpenings:.5"or.81"ThroatDepth:2"or4"

FastenerCapacity:112Gauge:18,Range:3⁄8"-5⁄8",Crown:7⁄16"Collation:Straightgluedstrip

HN150 SpecificationsItem#:3Y0001NReg.OperatingPressure:50-120psi(3.55-8.3bar)AirInlet:1/4"NPTToolWeight:HN1590:4.3lbs(2.0kg),HN250Height:9"(229mm)Length:12"(305mm)

HN250 SpecificationsItem#:3Z0001NReg.OperatingPressure:50-120psi(3.55-8.3bar)AirInlet:1/4"NPTToolWeight::4.8lbs(2.2kg),Height:11"(279mm)Length:11.5"(3292mm)

FastenerCapacity:30Shanks:.131"-.148",HN150 Range:1½"HN250 Range:1½"-2½"Collation:34˚papertapestrip

4"ThroatClinchF75LongReachAnvil

2"ThroatClinchF75SisalAnvil

Forfastenersseep.54SeriesJ

Forfastenersseep.46SeriesJ

F Series Used wherever two materials must be stapled and clinched.

HN150, HN 250Collated fastening solution for installing metal framing hardwares

M00

2261

BB

, M00

2262

HD

MD

17, M

0022

63 B

B, M

0022

64 H

D

1½_

1½_

.131 .148

MD

25, M

0022

65 B

B, M

0022

66 H

D

M00

2267

BB

, M00

2268

HD

2½_

.148

2½_

.162

––––HN150––––––––––––––––––HN150––––––––––

SPECIALTy TOOLS

Documents

Giving You The Power - Brewer Equipment Companybrewerequipmentco.com/uploads/Senco Full Tool Catalog1.pdf · No Hoses, No Compressors, No Hassles. Introducing SENCO’s Cordless Gas