GLASS TOWER SERIES REFRIGERATED - Cossiga · HT600 HINGED DOORS: 9/12/2014 Page 5: Stand Alone Unit With Covers . GLASS TOWER BTGAB - AMBIENT Unit Services: 750 195 45 45 45 900 ~

depth width

heig

ht

Contact us T +649 580 8471 F +649 580 2514 AUS. T 1300 099 215 E [email protected] download C.A.D. blocks please visit www.cossiga.com

• Solid front and top glass heated• Sliding rear doors (600 model hinged)• Deck forced refrigeration• Double glazed• Three adjustable shelves• Ticket strips on shelves and base• Undershelf and canopy LED lights• Integral condenser• Plinth, castors and skirt• Self evaporating• Rear condenser air intake and extract

CABINET DIMENSIONS & SPECIFICATIONS

more information in service section

Refrigerated 4o factory set point

COSSIGA Packaging

• Honeycomb cardboard design • Specifically for glass cabinets• Environmentally friendly• No timber used ( certified ply base )• No hammers or crowbars required

Model Cabinet Shelving no. Shelf length base tray Total food

unitsDisplay

m2Refrig-erant

Operating Current

Connection Voltage Packed for Shipping

w x d 100 x 100 50/60Hz

Length mm

Depth mm

Height mm

Length mm

Depth mm

Height mm

Weight Kg

Cube

BTGRF6 600 750 1380 3 + base 495 x 445 540 x 510 80 0.94 134A 5.0Amp 10amp 3 pin plug 240V 700 830 1550 132 1.25




0

900

1200

BTG

RF6

600

1500

BTG

RF9

BTG

RF1

2

BTG

RF1

5

REFRIGERATED

445

1380

750710

550

20

35

25

770

20

750

BTGRF GLASS TOWER SERIES

9/12/2014 Page 1

depth width

heig

ht


• Solid front and top glass • Sliding rear doors (600 model hinged)• Deck forced heating• Single glazed • Four adjustable shelves• Ticket strips on shelves and base• Undershelf and canopy LED lights• Plinth, castors and skirt



Heated 75o factory set point

COSSIGA Packaging


Model Cabinet Shelving no.

Shelf length base tray Total food

unitsDisplay

m2Operating Current Connection Voltage Packed for Shipping

w x d 100 x 100 50/60Hz

Length mm

Depth mm

Height mm

Length mm

Depth mm

Height mm

Weight Kg

Cube

BTGHT6 600 750 1380 4 + base 495 x 445 540 x 510 100 1.16 7.2Amp 10amp 3 pin plug 240V 1000 830 1550 132 1.25



GLASS TOWER SERIESBTGHT

1380

750710

550

20

35

25

770

20

750

445

750

900

1200

600

BTG

HT1

2

BTG

HT9

BTG

HT6

HEATED

9/12/2014 Page 2

depth width

heig

ht


• Solid front and top glass • Sliding rear doors• Circulating fan• Single glazed• Four adjustable shelves• Ticket strips on shelves and base• Undershelf and canopy LED lights• Plinth, castors and skirt



Ambient

COSSIGA Packaging


Model Cabinet Shelving no.

Shelf length base tray Total food

unitsDisplay

m2Operating Current Connection Voltage Packed for Shipping

w x d 100 x 100 50/60Hz

Length mm

Depth mm

Height mm

Length mm

Depth mm

Height mm

Weight Kg

Cube

BTGAB9 900 750 1380 4 + base 795 x 445 840 x 510 160 1.86 1.21 Amp 10amp 3 pin plug 240V 1300 830 1550 167 1.68

BTGAB12 1200 750 1380 4 + base 1095 x 445 1140 x 510 231 2.55 1.21Amp 10amp 3 pin plug 240V 1300 830 1550 167 1.68

GLASS TOWER SERIESBTGAB

1380

750710

550

20

35

25

770

20

750

445

750

900

1200

BTG

AB

12

BTG

AB

9

AMBIENT

9/12/2014 Page 3

SERVICES REQUIRMENTSBTGRF GLASS TOWER SERIES


GLASS TOWER BTGRF - Chilled Unit ServicesStand Alone Refrigerated Unit With Covers

750

305

400

95

705

150

445

195

45 4545

600 ~ 1500

GLASS

445

1380

750710

550

20

35

25

770

20

750

Maximum ambient operating temperature climate class N max 32˚C

Removable rear stainless steel cover for service

Clean condenser face at two weekly intervals

ELECTRICAL POWER

Electrical power cord 1500mm long All units 3 pin 10 amp 1 phase

REAR VIEW REAR VIEW RF600 HINGED DOORS

9/12/2014 Page 4

SERVICES REQUIRMENTSBTGHT GLASS TOWER SERIES


GLASS TOWER BTGHT - HEATED Unit ServicesStand Alone Unit With Covers

750

195

45 4545

600 ~ 1200

GLASS

1380

750710

550

20

35

25

770

20

750

445

305

400

95705

150

ELECTRICAL POWER

- Electrical power cord 1500mm long- All units 3 pin 10 amp 1 phase

Electrical box accessed from side withside panel removed

REAR VIEW REAR VIEW HT600 HINGED DOORS

9/12/2014 Page 5

GLASS TOWER BTGAB - AMBIENT Unit ServicesStand Alone Unit With Covers

750

195

45 4545

900 ~ 1200

GLASS

1380

750710

550

20

35

25

770

20

750

445

305

400

705

150

SERVICES REQUIRMENTSBTGAB GLASS TOWER SERIES


ELECTRICAL POWER

- Electrical power cord 1500mm long- All units 3 pin 10 amp 1 phase

Electrical box accessed from side withside panel removed

9/12/2014 Page 6


Internal Air Flow Requirements

CORRECT AIRFLOWfor both hot and cold units

Vents are not blocked at baseand ensure trays or plates are not blocking airflow at the rear of the unit

INCORRECT AIRFLOWfor both hot and cold units.

Blocked airflow disturbs correctair movement and creates uneven temperatures inside unitEnsure bottom vents are not blocked by plates or productBlocked air flow will retard operationon both HOT and COLD unit

Avoid Radiant and Convective Heat Sources

Heat from other equipment and natural conditions such as direct sunlight on any units can cause cooling to fail andover work the motor

Be aware of potential problems by placing units in adverse ambient conditions.

Locations to be avoided are:

- Close to shop front exterior- In an outside location- In direct sunlight- In a high cross wind area- Near any source producing excessive heat

Increase service intervals for units in dusty or polluted areas

CORRECT AIR FLOW INCORRECT AIR FLOW

CLEAR FLOW AIR FLOW BLOCKED

too much chilled airaround coil can createexcessive ice build up

NO AIR FLOW

BTG AIR FLOW AND UNIT PLACEMENT

9/12/2014 Page 7


Rear intake / extract system

BTG Rear Ventilation System

The Cossiga BTG range provides a rearintake and extract ventilation system byusing a unique side mounted compressordesign to provide the ability of the refrigerated units to be placed in more versatilesituations.

Unit front can be fully covered with custom panel joinery to fit any design environment without need for venting to front.

Ambient air intake throughright rear internally ducted through condenser face

Exhaust air extract throughleft rear internally ducted to environment

REAR VENTILATIONBTG GLASS TOWER SERIES

9/12/2014 Page 8

CLIP ON PANEL SYSTEM (COPS) BTG


Integrated Clip System Melteca Finish Options

Burnished Wood

Affinity Maple

Bliss Shitake

An easy to install option to eliminate the need for building a nib wall, simply roll in, clip on and start trading !

These clip on / clip off panels are offered in routed 18mm MDF with Melteca finish inthree colour options.

Available in 600 - 900 - 1200 -1500 length optionswith end panels

9/12/2014 Page 9


ACCESSORIESBTG GLASS TOWER SERIES

Top Mounted Controller PanelFor against wall installations.

Water Humidity Dish- Heated UnitsPlaced on bottom base tray of BTG unit.Perforated lid is removable.

Base Tray Shelf - Heated UnitsPlaced on bottom base tray of BTG heated unit to raise productoff base.Stainless steel to match upper shelves.Sold in pairs.

Price TabStainless steel price tabs.

Use adhesive label or write withmarker.Sold in packs of 20.

Measures 60mm x 30mm.

Stainless Steel Tong HolderDrop into counter tray race.

Cossiga recommends these units be able to be removed for cleaning.

Stainless Steel Bag HolderDrop into counter tray race.

Cossiga recommends these units be able to be removed for cleaning.

180

mm

220 mm

190 mm

105 mm

75 mm

100 mm190 m

m

80 mm

9/12/2014 Page 10



GLASS SHELF SIZES AND QUANTITYModel Glass Thickness Top Shelf mm glass part code

Toughened Depth Length No. Panes

BTG9 6mm 450 780 1 S21-295

BTG12 6mm 450 540 2 S21-296

BTG15 6mm 450 690 2 S21-297

BTG 12 and BTG 15 two panes per shelf level

Stainless steel glass shelfsupport brackets

BTG 9 one pane per shelf level

450

GLASS SHELVES

The glass tower refrigerated and heated series can also be fitted with glass shelves

The wire racks are removed and replaced with the 6mm toughened glass panes by the dealer on site. Stainless steel support brackets are used to hold the glass on the shelf frame

Glass shelves option is classed as an accessory at additional cost

Available only in AUS/NZ. International sales brackets only supplied and glass to be supplied by dealer

GLASS TOWER SERIES GLASS SHELF OPTIONSBTG

9/12/2014 Page 11



PIE TRAYSMODEL CODE QUANTITY DIMENSIONS

BTGHT6 BTGPT6 4 per shelf 16 x Tray 120(w) Shelves 445(d)



PIE TRAYS

Placed on shelves in heated unitsto contain rows of pies or heated product.

Adds a stylish quality look and makes similar product easilyidentifiable.

Stainless steel construction.

GLASS TOWER SERIESBTGHT HEATED UNITS ACCESSORIES - PIE TRAYS

9/12/2014 Page 12


GASTRONORM PAN SYSTEM


MODEL CODE PANS QUANTITY PER SYSTEM

BTGHT9 F92-316 3 per unit 3 x 265mm x 325mm pans and frame

BTGHT12 F92-317 4 per unit Two of 2 x 265mm x 325mm pans and frame


BTGHT GLASS TOWER SERIES - ACCESSORIES

Placed on the base of heated units.Provides an angled display viewof heated product more suitablefor pan storage.

Stainless steel construction.

9/12/2014 Page 13

Documents

GLASS TOWER SERIES REFRIGERATED - Cossiga · HT600 HINGED DOORS: 9/12/2014 Page 5: Stand Alone Unit With Covers . GLASS TOWER BTGAB - AMBIENT Unit Services: 750 195 45 45 45 900 ~