Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
GLAZED CERAMIC MOSAICS
GLAZED MOSAICS
GLAZED MOSAICSGLAZED MOSAICS
GLAZED HERRINGBONECOLORS
WHITE DANDELION FRENCH VANILLA
LATTE JADITE RED
DOVE CUMULUS CORNFLOWER
GLAZED STACK
WHITE DANDELION VANILLA JADITE
LATTE SAND MINK COCOA
CANARY ORANGE RED
DOVE
FOG
GREY MIX
CUMULUS CORNFLOWER
COBALT TWILIGHT
SMOKE BLACK
TWILIGHT BLACK
GLAZED PENNYROUNDS
WHITE DANDELION VANILLA JADITE CUMULUS CORNFLOWER
LATTE SAND MINK COCOA COBALT TWILIGHT
CANARY ORANGE RED SMOKE BLACK
DOVE
FOG
GREY MIX
3/8"x2 on 12 x 12" SheetWall & Floor Application
HERRINGBONE
3/8 x 2" on 12 x 12" SheetWall Application
STACK PENNYROUNDS
3/4" on 12 x 12" SheetWall & Floor Application
3/8x2 herringbone mosaicon 12x12 sheet
3/8”x2” rectangle mosaicon 12x12 sheet
3/4” pennyrounds mosaicon 12x12 sheet
*White & Black in all patterns available in gloss and matte finishes
GLAZED 1” HEXAGONCOLORS
WHITE* VANILLA LATTE
SAND MINK COCOA
CANARY ORANGE RED
DOVE FOG GREY MIX
CORNFLOWER
COBALT
BLACK*
*Available in matte or gloss finishes**Additonal colors available: twilight, jadite, smoke, cumulus and dandelion. Please contact sales representative for more information
1" on 12 x 12" SheetWall & Floor Application
GLAZED MOSAICS
6270 ASH STREET, VANCOUVER, BC, V5Z 3G9, CANADA, PH:604-639-7563; FX: 604-639-1814
GLAZED PORCELAIN TILESDocument Date: January 1, 2016
Porcelain Mosaics:
* All Testings were done to conform with European Standards* All Tiles are tested for suitability for wall and floor tiles.
ANSI. A137.1 FACTORYItem Requirement - Test Standard Test Result Remark
Method of Manufacture Dry Pressed TilesFactory production control ISO9001 Qualified
Dimensional and Surface Quality: 3% or 0.8mmLength ±0.8mm ±0.5mm PWidth ±0.8mm ±0.5mm PStraightness of sides ±1.8mm ±0.5mm PRectangularity ±1.8mm ±0.5mm PSmoothness ±0.8mm ±0.5mm P
Surface QualityVisible defects of surface min.95% defect free no defect was found PWater Absorption ≤0.5% ≤0.1% PBreaking Strength >250 LBF >285 LBF PModulus of Rupture ≥35 Mpa ≥39 Mpa PWearing Strength Less than 205mm³ Less than 140mm³Abrasion Resistance class IVThermal Linear Expansion Less than 9*10-6K-1 Less than 7*10-6K-1
Thermal Shock no defect found pCrazing Resistance no defect found PFrost Resistance no defect found PBond Strength ≥50 psi 133 psi PDYNAMIC Coefficient of Friction ≥0.42 0.5/0.6 PMoisture Expansion 0.0003Lead & Cadmium (ASTMC895) C<0.01; L<0.05 mg/LResistance to Staining class A PResistance to Chemicals Low Acids & Alkalis class A PResistance to Chemicals High Acids & Alkalis class A P
Test Information
GLAZED CERAMIC MOSAICS
V1
Uniform Appearance