The Blue Print of

C

A

D

S

To demonstrate the integrity & design Characteristics

Providing Technical Support and Quality Assurance

Identify the stringent Documentation and valve traceability

Identify the Standard features of GVC branded valve products

• About Us GVC Standard

• Industries We Serve

• Quality Assurance

• Certifications - API Q1 Q1-1878- API 6D Monogram 6D-1259 - ISO/TS 29001 TS-1582- ISO 9001: 2008 API # 1827

The GVC Difference

• Expert Technical Support• Customer Service • Valve Traceability• Ongoing Interactive

Product Training• Documentation • Shipping Procedures

The GVC Advantage

RESULTED IN • Successful, proven track

record in Forging Partnerships

• Niche is Midstream Projects in the Oil/Gas Industry for the past 13 years

• Low Cost

• Largest Casting Sizes

• Exceptional Alloy Range

• Short Mould Prep Time

• High Porosity Rate

• Exceptional Surface Finish

• High Dimensional Accuracy

• Very High Mental Yields

• Virtual Elimination of Need for

Machining

• Less Potential for Chloride Stress Cracks

The GVC Advantage Sand Casting VS Investment Casting

Design Features• Resilient Soft Seats • Bi-directional, Bubble Tight Seal• Lower Torques• Curvatures to Ball and Seat

• PTFE• TFM• RTFE• NOVA• Devlon• UHMWPE• PEEK• Vespel• Nylon• Viton• Flexible Graphite• And many more!

Series 20-RP• Standard port, two-piece body• Blowout proof stem• Adjustable stem packing• Carbon or stainless steel• Sizes 1 1/4” - 2” 1500 W.O.G (PSI) design• NACE compliant• Locking SS handle• High-quality investment casting• Threaded ends to ANSI B1.20.1 (NPT)• 1/4” - 1” 2000 W.O.G (PSI) design

Series 20-FP• Full port, two-piece body• High-quality investment casting• Adjustable stem packing• Carbon or stainless steel• Sizes 1/4” - 1” 2000 W.O.G (PSI) design• NACE compliant• Blowout proof stem• No Locking handle• Threaded ends to ANSI B1.20.1 (NPT)• Options of seat including: TFM, NOVA, and PTFE• 1 1/4” - 2” 1500 W.O.G (PSI) design

SERIES 10• Full port, two-piece body• Blowout proof stem• Adjustable stem packing• 1000 W.O.G (PSI) design• Sizes 1/4” - 4”• High-quality investment casting• Locking SS handle• Threaded ends to ANSI B1.20.1 (NPT)• Carbon or stainless steel

Series BV2000• Sizes 1/4” - 2”• Uni-body design• 2000psi• Threaded ends to ANSI B1.20.1 (NPT)• Floating ball

Series 800• One-piece body design• Locking SS handle• Blowout proof stem• 1000 W.O.G (PSI) design• Carbon or stainless steel• Threaded ends to ANSI B1.20.1 (NPT)

SERIES 790• Double union design ends eliminate piping unions for quicker, less expensive installation and maintenance• Rugged vinyl coated SS handle• Carbon or stainless steel• Wide variety of end connections available• In-line maintenance is easily achieved through quick change out of the body section• Full port design, 3000psi rated• Standard TFM seats and seals• Sizes 1/4” - 2”

Series 525 & FS-525• Sizes 1/4” - 2”• 3 Piece High Performance Full Port Threaded Ball • 2000 PSI • Wide variety of exotic alloys• Interchangeable connector ends• Full encapsulated body seals• Self-cleaning, leak tight slotted seat design• Encapsulated body bolt design• Fire tested according to API 607 standards (FS525 only)• Three-piece swing-out design• Bottom entry live loaded stem automatically adjusts with pressure and temperature changes• ISO 5211 integral mounting pad• Wide choice of seat options• Floating ball design

Series FSD-525• Sizes 1/2” - 2”• Three-piece design direct mounted for easy automation• 2000 PSI • Fire tested according to API 607 standards• Self-cleaning, leak tight slotted seat design• Variety of end combinations• Encapsulated body bolt design• Bottom entry live loaded stem• Fully encapsulated body seals• Floating ball design with anti-static device• Wide choice of seat options, such as NOVA, PEEK, TFE, Delrin, RTFE and UMPHWE (TFM standard)

Series BV6000• Standard port, two-piece body• Blowout proof stem• Adjustable stem packing• Carbon or stainless steel• Sizes 1 1/4” - 2” 1500 W.O.G (PSI) design• NACE compliant• Locking SS handle• High-quality investment casting• Threaded ends to ANSI B1.20.1 (NPT)• 1/4” - 1” 2000 W.O.G (PSI) design

Series BV3705• Full port, two-piece body• High-quality investment casting• Adjustable stem packing• Carbon or stainless steel• Sizes 1/4” - 1” 2000 W.O.G (PSI) design• NACE compliant• Blowout proof stem• No Locking handle• Threaded ends to ANSI B1.20.1 (NPT)• Options of seat including: TFM, NOVA, and PTFE• 1 1/4” - 2” 1500 W.O.G (PSI) design

SERIES BV3600• Sizes 1/4” - 2”• Two-piece body design• 3600 W.O.G (PSI) design• Locking SS handle• Threaded ends to ANSI B1.20.1 (NPT)• Optional seat weld available• High-quality investment casting• NACE compliant• ISO 5211 actuator mounting pad• Fire tested according to API 607 standards

Series CFS• Sizes 1/2” - 12”• ANSI 150-600• Two piece Floating Flanged Full Port Ball Valve• API 608 and 6D compliant• Split body, full or reduced port per ASME B16.34• Fully encapsulated body seals prevent seal rupture in steam or high pressure services• Self-cleaning, leak tight slotted seat design• Fully encapsulated seats• Blowout proof, anti-static stem design• Fire tested according to API 607 standards (Series FS only)• Wide variety of exotic alloys• Floating ball design prevents cavity pressure build-up while the valve is open• Wide choice of seat and seal material options

Series FSD-61• Sizes 1/2” - 8”• ANSI class 150-300• Direct mount for easy automation• Fire tested according to API 607 standards• Investment cast up 6”• Live loaded stem design• Fully encapsulated body seals• Fully slotted seat design• Standard anti-static device body and stem• Wide choice of seat material (TFM standard)• WCB, 316SS, Alloy 20, Hastelloy C and various other alloys

SERIES FS/YFS• Sizes 1/2” - 12”• ANSI 150-600• Flanged Full Port Ball Valve• API 608 and 6D compliant• Split body, full or reduced port per ASME B16.34• Belleville spring, live loaded stem seals• Fully encapsulated body seals prevent seal rupture in steam or high pressure services• Self-cleaning, leak tight slotted seat design• Fully encapsulated seats• Blowout proof, anti-static stem design• Fire tested according to API 607 standards (Series FS only)• Wide variety of exotic alloys• Floating ball design prevents cavity pressure build-up while the valve is open• ISO 5211 integral mounting pad allows for easy mounting of actuators or media containment bonnet• Wide choice of seat and seal material options

Series NV10000• Sizes 1/4” - 1”• 10,000psi rated• All stainless needle valve• Packed bonnet style• Wide variety of materials• Standard panel nut for easy assembly• Available in either soft or hard seat• End connections in either male/female or female/female

Series NVG6000• Sizes 1/4” - 1”• 6,000psi rated • All stainless Multiport Needle valve• Multiport Needle valve• Teflon/Viton Packing and Seals• Threads conform to ASME B1.20.1• Working Temperature -20 Deg (F) to 200 Deg F• 3 Female x Male End connections

Series GLF-4• Sizes 1/4” - 2”• ANSI class 150-1500• Forged steel globe valve• Flanged, threaded, and socket weld ends • API 602 Design• Conventional or full port• Available in A105N, F316, F304, F11, F22, LF2, and other materials.

Series GF-3• Sizes 1/4” - 2”• ANSI class 150-1500• Forged steel gate valve• Flanged, threaded, and socket weld ends • API 602 Design• Conventional or full port• Available in A105N, F316, F304, F11, F22, LF2, and other materials.

Series CKF-2• Sizes 1/4” - 2”• ANSI class 150-1500• Forged steel check valve• Flanged, threaded, and socket weld ends • Available in piston, ball, or swing design• API 602 Design• Conventional or full port• Available in A105N, F316, F304, F11, F22, LF2, and other materials.

Series GL• Sizes 2” – 36• ANSI Class 150-2500”• Cast steel• Globe valve, BS1873• NACE MR01-75 compliant• Flanged and butt weld ends• Bolted bonnet, O S & Y• WCB, CF8M, and various other alloys available

Series G• Sizes 2” - 48”• ANSI Class 150-2500• Cast steel• Gate valve, API 600 Design• NACE MR01-75 compliant• Flanged and butt weld ends• Bolted bonnet, O S & Y• WCB, CF8M, and various other alloys available

Series CK• Sizes 2” - 36”• ANSI Class 150-2500• Cast steel• Swing check, API 6D Design• NACE MR01-75 compliant• Flanged and butt weld ends• Bolted design• Full opening• WCB, CF8M, and various other alloys available

Series 2T/3T• Sizes 2” - 48”• ANSI 150-2500• API 6D Flanged Trunnion Mounted Ball Valve• API 6D, ASME B16.34 and BS5351 specifications• Flange face to face to ASME B16.10• Fire tested according to API 607 standards• NACE MR01-75 compliant• Flange dimensions to B16.5• Butt weld ends to B16.25• Blowout proof stem design• Standard anti-static device• Full and reduced port designs• Two-piece cast and three-piece forged design• Three-piece forged with upper and lower trunnion plates• Double block and bleed• Double body sealing and triple stem seal design• Body cavity pressure relief system• Live loaded seat design that energizes the seats• Optional third-party testing

Series EXPG• Sizes 2” - 36”• ANSI class 150-1500• API 6D Expanding Gate Valve forms positive tight sealing• API 6D Design• NACE MR01-75 compliant• Seals at low & high pressure• Bypass system for thermal cavity relief venting• Full port thru conduit for passage of pigs.• Available in A216 WCB, WCC

Series SLBG• Sizes 2” - 36”• ANSI class 600-1500• API 6D Slab Gate Valve• Pressure assisted seats for high pressure sealing• API 6D Design• NACE MR01-75 compliant• Spring loaded seat for low pressure sealing• Internal pressure relieving • Full port thru conduit for passage of pigs.• Available in A216 WCB, WCC through self-relieving seats

GLOBAL Valve & Controls© manufactures a wide array of unibody to 3 pc. Designs in threaded and socket welded ball valves, ½” to 4”, up t0 6000 psi or ANSI 600. Standard features are, as listed, below:

GLOBAL Valve & Controls© design ball valves incorporate the use of upper and lower supports (GVC trunnion plate system) to retain the ball under pressure.The GLOBAL Valve & Controls© trunnion ball valve design Using the upper and lower trunnion plate system essentially doubles the safety and reliability of a standard trunnion ball valve.

ANSI 150 through 600 from ½” through 12” – Global Valve and Controls high performance flanged ball valve design is the product of an extensive R&D program that offers standard live loaded stem design for zero design fugitive emissions, investment cast up to eight inch, standard locking handle and TFM seats.

GLOBAL Valve & Controls© Cast Steel Valves Like the rest of our flow control solutions, GVC offers cast steel valves from ANSI 150 through 2500 from ½”through 48”.

GLOBAL Valve & Controls© 6D Valves are high performance gate valves with outstanding features. This type of valve possesses functions of double & bi-directional sealing and reinforced mechanical sealing.

GLOBAL Valve & Controls© Cast Steel Valves Like the rest of our flow control solutions, GVC offers cast steel valves from ANSI 150 through 2500 from ½”through 48”.GLOBAL Valve & Controls© 6D Valves are high performance gate valves with outstanding features. This type of valve possesses functions of double & bi-directional sealing and reinforced mechanical sealing.

GLOBAL Valve & Controls© Cast Steel Valves Like the rest of our flow control solutions, GVC offers cast steel valves from ANSI 150 through 2500 from ½”through 48”.GLOBAL Valve & Controls© 6D Valves are high performance gate valves with outstanding features. This type of valve possesses functions of double & bi-directional sealing and reinforced mechanical sealing.

GLOBAL Valve & Controls© GVC offers a complete line of valve flow control accessories from brackets and couplers to media containment bonnets for severe service applications.

GLOBAL Valve & Controls© GVC offers a complete line of valve flow control accessories from brackets and couplers to media containment bonnets for severe service applications.

GLOBAL Valve & Controls© GVC offers a complete line of valve flow control accessories from brackets and couplers to media containment bonnets for severe service applications.

GLOBAL Valve & Controls© GVC offers a complete line of valve flow control accessories from brackets and couplers to media containment bonnets for severe service applications.