Features – BenefitsAbrasion Resistant Blue Nylon Casing – Provides high visibility for safety and the toughest exterior available to withstand harshindustrial environmentsInternally Lubricated Shaft Insert molded out of a self lubricating material – Reduces friction and increases shaft lifeMetal Nut – Provides a secure connection to the drive unit without any concern for breakageUnique Strain Relief System custom molded with a variable thickness – Allows for a gradual radial bend that is far superior to aspring or coiled wireShaft Stop which can be positioned anywhere along the shaft – Lets the operator know when the end of the tube has been reached

Quick Connect Tool Coupling – Allows the operator to change brushes and cleaning tools up to 30 times faster then on shaftswith threaded connectionsGalvanized Spring Steel comprised of multiple counter rotated windings – Unmatched performance and long durability

22

Goodway Flexible ShaftsTU

BE

CLE

AN

ERA

CCES

SO

RIE

S

Galvanized Spring Steel

Metal Nut

Unique StrainRelief System Shaft Stop

Internally LubricatedShaft Insert

Abrasion ResistantBlue Nylon Casing

Shaft No. Casing O.D. Tool End Thread

701 1⁄4" (6.4mm) 8-32 female

702 3⁄8" (9.5mm) 1⁄4-28 female

703 1⁄2" (12.7mm) 1⁄4-28 female

704 9⁄16" (14.3mm) 1⁄4-28 female

QUICK CONNECT FITTINGS

Patented

PatentedQuick ConnectTool Coupling

THE BEST IN THE BUSINESS

Note: Look forthis symbol forQuick Connect Shaftand Brush Fittings.

Shaft No. Casing O.D. Tool End Thread

720 3⁄4" (19.1mm) 1⁄2-12 female

721 7⁄8" (22.2mm) 1⁄2-12 female

721G 7⁄8" (22.2mm) 1⁄2-12 female

821 7⁄8" (22.2mm) 1⁄2-12 female

Flexible Shaft Dimensions

34

Aggressive Tube Tools Continued

LARGEBRUSHES

ANDTO

OLS

Carbide DrillsCarbide Drills are recommended for cleaning straight, ferrous tubes plugged solidly with depositGTC-231D 3⁄4" (19.1mm), GTC-229 7⁄8" (22.2mm) or PTB-100 1" (25.4mm) $55.00 ea.Note: All drills run 10% oversize [e.g. GTC-231D Drill is 0.825" (21.0mm) O.D.].

Flex-Hone Abrasive ToolsFlex-Hone Abrasive Tools are light pressure, soft application honing devices for cleaning straight, ferroustubes. They consist of 180 grit silicon carbide abrasive globules (stones) bonded to high density nylonfilaments. Order tool to correspond to tube I.D.FHT-125 11⁄4" (32mm), FHT-150 11⁄2" (38mm), FHT-175 13⁄4" (45mm) or FHT-200 2" (51mm) $42.00 ea.FHT-225 21⁄4" (57mm), FHT-250 21⁄2" (64mm), FHT-275 23⁄4" (70mm) or FHT-300 3" (76mm) $52.00 ea.Note: Flex-Hone Abrasive Tools are normally used with water flush for maximum life.

Flex Hub ToolsFlex Hub Tools incorporate centrifugally activated blades for removing hard and heavy deposits in straight or curved,ferrous tubes. A drill can be attached to the front of the GTC-227 or GTC-231 Flex Hub to clean severely clogged tubes.GTC-226 Flex Hub for straight tubes 7⁄8"-11⁄2" (22.2-38mm) I.D. or curved tubes1"-13⁄4" (25.4-45mm) I.D. $75.00GTC-231 Flex Hub for straight tubes 11⁄2"-2" (38-51mm) I.D. or curved tubes13⁄4"-2 1⁄2" (45-64mm) I.D. $95.00GTC-227 Flex Hub for straight tubes 13⁄4"-4" (45-102mm) I.D. or curved tubes2 1⁄2"-4" (64-102mm) I.D. $105.00GTC-226A Replacement Metal Blades for GTC-226 (set of three) $55.00GTC-231A Replacement Metal Blades for GTC-231 (set of three) $60.00GTC-227A Replacement Metal Blades for GTC-227 (set of three) $70.00GTC-229 Drill to be attached to GTC-227 Flex Hub $55.00GTC-231D Drill to be attached to GTC-231 Flex Hub $55.00CUJ-002 Universal Joint for use with Flex Hubs when minimum tube bend radius is lessthan 5 x I.D. of the tube (consult factory) $58.00

Rigid Arm Flare Cone ToolsRigid Arm Flare Cone Tools incorporate centrifugally activated, serrated cones for removing light to heavy scaledeposits in straight, ferrous tubes. Use in horizontal or vertical tubes.FCT-300 Flare Cone Tool for tubes 13⁄4"-4" (45-102mm) I.D. $145.00FCT-301 Flare Cone Tool for tubes 4"-61⁄2" (102-165mm) I.D. $145.00RCO-100 Replacement Cone $30.00CRB-001 Replacement Cone Retainer Bolt $5.00

Flexible Arm Flare Cone ToolThe Flexible Arm Flare Cone Tool incorporates centrifugally activated serrated cones for removing light to heavyscale deposits in straight or curved, ferrous tubes. Most effective results are obtained if tube is in verticalposition when cleaning.FCT-600 Flare Cone Tool for tubes 4"-12" (102-305mm) I.D. $185.00RCO-100 Replacement Cone $30.00CRB-001 Replacement Cone Retainer Bolt $5.00

Flare BrushesFlare Brushes incorporate centrifugally activated wire cables with cobalt tips for light descaling and finishingof straight or curved, ferrous and nonferrous tubes.FBT-301 Three Strand Flare Brush for tubes 1"-2" (25.4-51mm) I.D. $75.00FBT-501 Five Strand Flare Brush for tubes 2"-4" (51-102mm) I.D. $85.00FBT-502 Five Strand Flare Brush for tubes 4"-8" (102-203mm) I.D. $95.00

Universal Nylon Rod (Flare) ToolThe Universal Nylon Rod (Flare) Tool incorporates centrifugally activated nylon rods for removing light depositsin straight or curved, ferrous and nonferrous tubes.UFT-005-8 Universal Nylon Rod (Flare) Tool for tubes 2"-15" (51-381mm) I.D. $45.00

Please check your tube I.D.before placing order.

Aggressive Tube Tools

33For Sales Call: +1-203-359-4708

Fax: +1-203-359-9601For tools or sizes not shown,consult factory.

LAR

GE

BR

USH

ESA

ND

TOO

LS

Cone Cutter Assemblies

To order Wheel Brush Assemblies refer tothe table below listing the type of tubes tobe cleaned – straight or curved.Straight Tube Wheel Brush AssembliesRecommended for removing soft and lightscale deposits in straight, ferrous tubes.Each assembly consists of four stainlesssteel wire wheel brushes attached to auniversal joint. Brushes should be 1⁄8"-1⁄4"(3.2-6.4mm) smaller than tube I.D.Curved Tube Wheel BrushAssembliesRecommended for removing soft and lightscale deposits in curved, ferrous tubes.Each assembly consists of a singlestainless steel wire wheel brush attachedto each end of a universal joint. Brushesshould be 1⁄4"- 3 ⁄ 8" (6.4-9.5mm) smallerthan tube I.D.* Note: GTC-706 Coupling required to

connect to GTC-720, GTC-721, GTC-721G

and GTC-821 Flexible Shafts.

Cone Cutter Assemblies are designed forremoving scale deposits from straight andcurved, ferrous tubes. Assemblies shouldbe slightly smaller than tube I.D. Theinnovative design of the cones ensures athorough cleaning. In watertube boilers,cone cutters are the most effectivecleaning tools for all conditions.Single and Double Cone AssembliesAssemblies consisting of one or two coneelements are used for cleaning straighttubes 11⁄8"-2 5⁄16" (29-59mm) I.D. andcurved tubes 11⁄4"-23⁄8" (32-60mm) I.D.Disc Cone AssembliesAssemblies consisting of three coneelements are used for cleaning straighttubes 23⁄8"-33⁄4" (60-95mm) I.D. and curvedtubes 21⁄2"- 4" (64-102mm) I.D.

Drill/Cone Assemblies are recommended for cleaning straight, ferrous tubes plugged solidly with deposits. Orderassembly to correspond to tube I.D.DDC-100 1" (25.4mm), DDC-112 11⁄8" (29mm),DDC-125 11⁄4"-13⁄8" (32-35mm), DDC-150 11⁄2"-15⁄8" (38-41mm) orDDC-175 13⁄4"-17⁄8" (45-48mm) $99.00ea.

Drill Cone Assemblies

Wheel Brush Assemblies

Curved Wheel Brush Actual ReplacementTube I.D. Assembly Brush O.D. Brushes

$75.00 ea. $12.00 ea.11⁄4" - 13⁄8" (32-35mm) WBC-100* 1" (25.4mm) WBR-10011⁄2" - 15⁄8" (38-41mm) WBC-125* 11⁄4" (32mm) WBR-12513⁄4" - 17⁄8" (45-48mm) WBC-150* 11⁄2" (38mm) WBR-1502" - 21⁄8" (51-54mm) WBC-175 13⁄4" (45mm) WBR-1752 1⁄4" - 23⁄8" (57-60mm) WBC-200 2" (51mm) WBR-2002 1⁄2" - 25⁄8" (64-67mm) WBC-225 21⁄4" (57mm) WBR-22523⁄4" - 27⁄8" (70-73mm) WBC-250 21⁄2" (64mm) WBR-2503" - 31⁄8" (76-79mm) WBC-275 23⁄4" (70mm) WBR-27531⁄4" - 31⁄2" (83-89mm) WBC-300 3" (76mm) WBR-300

Straight Curved Single Double ReplacementTube I.D. Tube I.D. Cone Cone Cones

Assembly Assembly $30.00 ea.$90.00 ea. $98.00 ea.

11⁄8" - 11⁄4" (29-32mm) 11⁄4" - 13⁄8" (32-35mm) SCA-100 DCA-100 RCO-10015⁄16" - 13⁄8" (33-35mm) 11⁄2" - 15⁄8" (38-41mm) SCA-112 DCA-112 RCO-11217⁄16" - 11⁄2" (37-38mm) 13⁄4" - 17⁄8" (45-48mm) SCA-125 DCA-125 RCO-12519⁄16" - 13⁄4" (40-45mm) 2" - 2 1⁄8" (51-54mm) SCA-150 DCA-150 RCO-150

113⁄16" - 2" (46-51mm) 21⁄4" - 2 3⁄8" (57-60mm) SCA-175 DCA-175 RCO-17521⁄16" - 2 5⁄16" (52-59mm) SCA-200 DCA-200 RCO-200

Straight Curved Disc ReplacementTube I.D. Tube I.D. Cone Cones

Assembly $30.00ea.$130.00 ea.

23⁄8" - 213⁄16" (60-71mm) 21⁄2" -3 1⁄16" (64-78mm) CDC-101 RCO-10027⁄8" - 35⁄16" (73-84mm) 31⁄8" -35⁄8" (79-92mm) CDC-102 RCO-10033⁄8" - 33⁄4" (86-95mm) 311⁄16" - 4" (94-102mm) CDC-103 RCO-112

Straight Wheel Brush Actual ReplacementTube I.D. Assembly Brush O.D. Brushes

$95.00 ea. $12.00 ea.11⁄8" - 11⁄4" (29-32mm) WBS-100 1" (25.4mm) WBR-10013⁄8" - 11⁄2" (35-38mm) WBS-125 11⁄4" (32mm) WBR-12515⁄8" - 13⁄4" (41-45mm) WBS-150 11⁄2" (38mm) WBR-15017⁄8" - 2" (48-51mm) WBS-175 13⁄4" (45mm) WBR-1752 1⁄8" - 21⁄4" (54-57mm) WBS-200 2" (51mm) WBR-2002 3⁄8" - 21⁄2" (60-64mm) WBS-225 21⁄4" (57mm) WBR-2252 5⁄8" - 23⁄4" (67-70mm) WBS-250 21⁄2" (64mm) WBR-25027⁄8" - 3" (73-76mm) WBS-275 23⁄4" (70mm) WBR-27531⁄8" - 31⁄4" (79-83mm) WBS-300 3" (76mm) WBR-300

32

Tube Brushes and Tools 1" and Up

www.goodway.com

LAR

GE

BR

USH

ESA

ND

TOO

LS

Please check your tube I.D.before placing order.

Adjustable Triangular Scraper Tools

Brushes Continued

Note: TCB Brushes require a #TCB-C Coupling to connect to GTC-720, GTC-721, GTC-721G and

GTC-821 Flexible Shafts. (One coupling is supplied with each brush order.)

Adjustable Buffing Tools

Carbon Steel Brushes Recommended for removing soft and light scale deposits in straight, ferrous tubes.Order brush to correspond to tube I.D. (Not recommended for stainless steel tubes.)TCB-050C 5" (127mm) $16.50TCB-060C 6" (152mm) $17.50TCB-070C 7" (178mm) $18.50TCB-080C 8" (203mm) $19.50

TCB-090C 9" (229mm) $20.50TCB-100C 10" (254mm) $21.50TCB-110C 11" (279mm) $22.50TCB-120C 12" (305mm) $23.50

TCB-130C 13" (330mm) $24.50TCB-140C 14" (356mm) $25.50

TCB-040P 4" (102mm) $13.50TCB-050P 5" (127mm) $14.50TCB-060P 6" (152mm) $15.50TCB-070P 7" (178mm) $16.50

TCB-080P 8" (203mm) $17.50TCB-090P 9" (229mm) $18.50TCB-100P 10" (254mm) $19.50TCB-110P 11" (279mm) $20.50

TCB-120P 12" (305mm) $21.50TCB-130P 13" (330mm) $22.50TCB-140P 14" (356mm) $23.50

Plastic Brushes Recommended for removing soft deposits in straight, ferrous and nonferrous tubes. Orderbrush to correspond to tube I.D.

Spring Filled Brushes Recommended for removing heavy scale deposits in straight, ferrous tubes. The springbristles dig into the scale breaking it free from the tube wall.SFB-200 Spring Filled Brushes for tubes 13⁄8", 15⁄8", 2", 21⁄2", or 3" (35mm, 41mm, 51mm, 64mm or 76mm) O.D. $29.00 ea.SFB-300 Spring Filled Brushes for tubes 2" or 3" (51mm or 76mm) I.D. $29.00 ea.

Stainless Steel Wire Buffing Tools are used for removing light to medium scale deposits or for finishing tubespreviously “roughed out” with other cleaning tools. They can be used in straight, ferrous and nonferrous tubes.GTC-223 Buffing Tool for tubes 1"-3" (25.4-76mm) I.D. $39.00GTC-223DT Same as above with drill tip $75.00GTC-224 Replacement Blades for GTC-223 $8.00/set

Triangular Scraper Tools are used for removing heavy scale deposits in straight, ferrous tubes. They areadjustable to a 1⁄2" range.TST-1000 Triangular Scraper Tool for tubes 1"-11⁄2" (25.4-38mm) I.D. $99.00TST-1500 Triangular Scraper Tool for tubes 11⁄2"-2" (38-51mm) I.D. $105.00TST-2000 Triangular Scraper Tool for tubes 2"-21⁄2" (51-64mm) I.D. $115.00TST-2500 Triangular Scraper Tool for tubes 21⁄2"-3" (64-76mm) I.D. $140.00

Tube Brushes 1" and Up

31For Sales Call: +1-203-359-4708

Fax: +1-203-359-9601For tools or sizes not shown,consult factory.

LAR

GE

BR

USH

ESA

ND

TOO

LSDual Diameter Spin-Grit Brushes Recommended for removing soft and light scale deposits in straight,ferrous and nonferrous internally enhanced tubes. The small diameter end of this brush cleans into the grooveswhile the large diameter end cleans the lands of the tube’s rifling.ESGB-100 Dual Diameter Spin-Grit Brush for tubes 1" (25.4mm) I.D. $5.95ESGB-125 Dual Diameter Spin-Grit Brush for tubes 11⁄4" (32mm) I.D $5.95Note: ESGB brushes require a GTC-706 Coupling to connect to GTC-720, GTC-721, GTC-721G and GTC-821

Flexible Shafts.

TCB-012S 11⁄4" (32mm) $12.25TCB-015S 11⁄2" (38mm) $12.50TCB-017S 13⁄4" (45mm) $12.75TCB-020S 2" (51mm) $13.00TCB-022S 21⁄4" (57mm) $13.25TCB-025S 21⁄2" (64mm) $13.50

TCB-027S 23⁄4" (70mm) $13.75TCB-030S 3" (76mm) $14.00TCB-032S 31⁄4" (83mm) $14.25TCB-035S 31⁄2" (89mm) $14.50TCB-037S 33⁄4" (95mm) $14.75TCB-040S 4" (102mm) $15.00

TCB-042S 41⁄4" (108mm) $15.50TCB-045S 41⁄2" (114mm) $16.00TCB-047S 43⁄4" (121mm) $16.50TCB-050S 5" (127mm) $17.00

TCB-012N 11⁄4" (32mm) $7.75TCB-015N 11⁄2" (38mm) $8.00TCB-017N 13⁄4" (45mm) $8.25TCB-020N 2" (51mm) $8.50

TCB-022N 21⁄4" (57mm) $8.75TCB-025N 21⁄2" (64mm) $9.00TCB-027N 23⁄4" (70mm) $9.25TCB-030N 3" (76mm) $9.50

TCB-032N 31⁄4" (83mm) $9.75TCB-035N 31⁄2" (89mm) $10.00TCB-037N 33⁄4" (95mm) $10.25TCB-040N 4" (102mm) $10.50

TCB-012B 11⁄4" (32mm) $9.75TCB-015B 11⁄2" (38mm) $10.00TCB-017B 13⁄4" (45mm) $10.25TCB-020B 2" (51mm) $10.50

TCB-022B 21⁄4" (57mm) $10.75TCB-025B 21⁄2" (64mm) $11.00TCB-027B 23⁄4" (70mm) $11.25TCB-030B 3" (76mm) $11.50

TCB-032B 31⁄4" (83mm) $11.75TCB-035B 31⁄2" (89mm) $12.00TCB-037B 33⁄4" (95mm) $12.25TCB-040B 4" (102mm) $12.50

Stainless Steel Brushes Recommended for removing soft and light scale deposits in straight, ferrous tubes.Order brush to correspond to tube I.D.

Note: TCB Brushes require a #TCB-C Coupling to connect to GTC-720, GTC-721, GTC-721G and

GTC-821 Flexible Shafts. (One coupling is supplied with each brush order.)

Brass Brushes Recommended for removing soft and light scale deposits in straight, ferrous and nonferroustubes. Order brush to correspond to tube I.D.

Brushes

Nylon Brushes Recommended for removing soft deposits (mud, algae, etc.) in straight, ferrous and nonferroustubes. Order brush to correspond to tube I.D.

30

Smooth Bore Tube Tools

3⁄8"-1" Only

www.goodway.com Please check your tube I.D.before placing order.

BR

USH

ESA

ND

TOO

LS

Adjustable Buffing ToolsStainless Steel Wire Buffing Tools are used for removing light to medium scale deposits or for finishing tubes previously “roughedout” with other cleaning tools. They can be used in straight, ferrous and nonferrous tubes. Buffing tools can only be used in aclockwise (forward) direction and cannot be used in internally enhanced tubes. They are adjustable to a 1⁄4" range.GTC-203 Buffing Tool for tubes 5⁄16"-3⁄8" (7.9-9.5mm) I.D. $17.00 GTC-203DT Same as GTC-203 with drill tip $23.00GTC-204Q Buffing Tool for tubes 3⁄8"-1⁄2" (9.5-12.7mm) I.D. $17.00 GTC-204QDT Same as above with drill tip $23.00GTC-205Q Buffing Tool for tubes 1⁄2"- 9⁄16" (12.7-14.3mm) I.D. $17.00 GTC-205QDT Same as above with drill tip $23.00GTC-206Q Buffing Tool for tubes 5⁄8"- 1" (15.9-25.4mm) I.D. $17.00 GTC-206QDT Same as above with drill tip $23.00GTC-207 Replacement Blades for GTC-203 and GTC-204 $7.50/setGTC-208A Replacement Blades for GTC-205 $7.50/setGTC-208B Replacement Blades for GTC-206 $7.50/setGTC-209 Adjusting Jig for GTC-203 and GTC-204 $28.00

Adjustable Triangular Scraper ToolTriangular Scraper Tools are used for removing heavy scale deposits in straight, ferrous tubes. They can only be used in a clockwise(forward) direction and cannot be used in internally enhanced tubes. They are adjustable to a 1⁄4" range.TST-500 Triangular Scraper Tool 1⁄2"-3⁄4" (12.7-19.1mm) I.D. $59.00TST-750 Triangular Scraper Tool 3⁄4"-1" (19.1-25.4mm) I.D. $69.00

Carbide DrillsCarbide Drills are recommended for cleaning straight, ferrous tubes plugged solidly with deposit.PTB-025 1⁄4" (6.4mm), PTB-037 3⁄8" (9.5mm), PTB-043 7⁄16" (11.1mm) or PTB-050 1⁄2" (12.7mm) $34.00 ea.PTB-056 9⁄16" (14.3mm), PTB-062 5⁄8" (15.9mm) or PTB-068 11⁄16" (17.5mm) $38.00 ea.Note: All drills run 10% oversize [e.g. PTB-062 Drill is 0.6875" (17.5mm) O.D.].

Flex-Hone Abrasive ToolsFlex-Hone Abrasive Tools are light pressure, soft application honing devices for cleaning straight, ferrous tubes. They consist of180 grit silicon carbide abrasive globules (stones) bonded to high density nylon filaments. Order tool to correspond to tube I.D.FHT-025 1⁄4" (6.4mm), FHT-031 5⁄16" (7.9mm), FHT-037 3⁄8" (9.5mm), FHT-043 7⁄16" (11.1mm) or FHT-050 1⁄2" (12.7mm) $26.00 ea.FHT-056 9⁄16" (14.3mm), FHT-062 5⁄8" (15.9mm) or FHT-068 11⁄16" (17.5mm) $28.00 ea.FHT-075 3⁄4" (19.1mm), FHT-087 7⁄8" (22.2mm) or FHT-100 1" (25.4mm) $32.00 ea.Note: Flex-Hone Abrasive Tools are normally used with a water flush for maximum life.

Flex Hub ToolFlex Hub Tools incorporate centrifugally activated blades for removing hard and heavy deposits in straight, ferrous tubes.GTC-225 Flex Hub for straight tubes 1⁄2"-1" (12.7-25.4mm) I.D. $175.00GTC-225A Replacement Metal Blades for GTC-225 (set of three) $95.00

U-Tube ToolsConsisting of brushes or grinding tips permanently mounted on 18" sections of flexible shafts, U-Tube Tools are designed to snake partiallythrough each side of a U-bend, to thoroughly clean from both sides.Cup Brush Tools – Brass or Stainless SteelCBT-075B Brass Cup Brush for tubes 1⁄2"- 3⁄4" (12.7-19.1mm) I.D. $27.50CBT-075S Stainless Steel Cup Brush for tubes 1⁄2"- 3⁄4" (12.7-19.1mm) I.D. $27.50Wheel Brush Tools – Brass or Stainless SteelWBT-075B Brass Wheel Brush 3⁄4" (19.1mm) diameter $30.00WBT-100B Brass Wheel Brush 1" (25.4mm) diameter $30.00WBT-075S Stainless Steel Wheel Brush 3⁄4" (19.1mm) diameter $30.00WBT-100S Stainless Steel Wheel Brush 1" (25.4mm) diameter $30.00Grinding Tip ToolsGTT-050 Grinding Tip Tool 1⁄2" (12.7mm) diameter $135.00GTT-625 Grinding Tip Tool 5⁄8" (15.9mm) diameter $135.00

7⁄16"-1" Only

7⁄16"-1" Only

7⁄16"-1" Only

7⁄16"-1" Only

Goodway’s exclusive Blue Nylon Brushesare the latest in nylon brush technology.They offer many advantages over othernylon brushes including:• X-shaped filaments to maximize brush

contact with tube• Higher bristle density for greater

cleaning power• 30% more stiffness when wet for better

maintenance of shape• Greater resistance to chemicals and

acids for longer life• Sizes boldly printed on brush stems for

easy identification

Brushes for Smooth Bore Tubes

Blue Nylon Brushes Recommended for removing soft deposits (mud, algae, etc.) in straight,ferrous and nonferrous tubes. Brush should be equal to or 1⁄16" (1.6mm) smaller than tube I.D.GTC-211Q Blue Nylon Brushes 1⁄4",5⁄16", 3⁄8", 7⁄16", 1⁄2", 13⁄16", 7⁄8", 15⁄16" or 1"

(6.4mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 20.6mm, 22.2mm, 23.8mmor 25.4mm) $4.00 ea. (Available in Bags of 15)

GTC-211Q Blue Nylon Brushes 9⁄16", 5⁄8", 11⁄16" or 3⁄4" (14.3mm, 15.9mm, 17.5mmor 19.1mm) $4.00 ea. (Available in Bags of 25)

Spin-Grit Brushes Recommended for removing soft and light scale deposits in straight, ferrousand nonferrous tubes. The abrasive impregnated nylon bristles of this brush clean and polish tubesin one step. Unlike regular spiral brushes, Spin-Grit is designed to be oversized in the tube so thebristles lay over, putting the abrasive in contact with the tube wall.SGB-050 Spin-Grit Brushes for tubes 1⁄4"-3⁄8" (6.4-9.5mm) I.D. $5.95 ea. (Available in Bags of 15)SGB-075Q Spin-Grit Brushes for tubes 7⁄16"- 5⁄8" (11.1-15.9mm) I.D. $5.95 ea. (Available in Bags of 15)SGB-100Q Spin-Grit Brushes for tubes 11⁄16"- 3⁄4" (17.5-19.1mm) I.D. $5.95 ea. (Available in Bags of 15)SGB-125Q Spin-Grit Brushes for tubes 13⁄16"- 1" (20.6-25.4mm) I.D. $5.95 ea. (Available in Bags of 15)

Brass Brushes Recommended for removing soft and light scale deposits in straight, ferrous andnonferrous tubes. Brush should be equal to or 1⁄16" (1.6mm) smaller than tube I.D.GTC-200BQ Brass Brushes 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16" or 1"

(6.4mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm, 19.1mm,20.6mm, 22.2mm, 23.8mm or 25.4mm) $4.95 ea. (Available in Bags of 15)

Stainless Steel Brushes Recommended for removing soft and light scale deposits in straight,ferrous tubes. Brush should be equal to or 1⁄16" (1.6mm) smaller than tube I.D.GTC-210Q Stainless Steel Brushes 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8",

15⁄16" or 1" (6.4mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm, 17.5mm,19.1mm, 20.6mm, 22.2mm, 23.8mm or 25.4mm) $5.25 ea. (Available in Bags of 15)

Note: 1⁄4" and 5 ⁄16" (6.4mm and 7.9mm) threaded brushes require a #C-1 Coupling, and 3⁄8" (9.5mm)

threaded brushes require a #C-2 Coupling to connect to GTC-701 Flexible Shafts. (Couplings supplied

with GTC-701 Flexible Shaft order.)

Note: 9 ⁄16"-1" (14.3-25.4mm) brushes can be used for both clockwise and counter-clockwise rotation.

Note: All Goodway brushes and buffing tools are

available with standard threaded tool couplings.

To order leave off the “Q” in the part number.

Smooth Bore Tube Brushes

29For Sales Call: +1-203-359-4708

Fax: +1-203-359-9601For tools or sizes not shown,consult factory.

BR

USH

ESA

ND

TOO

LS

28

Internally Enhanced Tube Brushes

www.goodway.com

BR

USH

ESA

ND

TOO

LS

Goodway brushes are now soldindividually and in bags of

15 or 25 (depending on brush).

Brushes for Internally Enhanced Tubes

Large Diameter of Brush Cleans Grooves

Small Diameter of Brush Cleans Lands

The”Patriot®” Dual Diameter Nylon Brush Recommended for removing soft deposits (mud,algae, etc.) in straight, ferrous and nonferrous internally enhanced tubes. The large diameter end ofthis brush cleans into the grooves while its small diameter end cleans the lands of the tube’s rifling.ENN-062-Q The “Patriot” Dual Diameter Nylon Brush

for tubes 5⁄8" (15.9mm) I.D. only $5.95 ea. (Available in Bags of 25)

Dual Diameter Spin-Grit Brushes Recommended for removing soft and light scale deposits instraight, ferrous and nonferrous internally enhanced tubes. The small diameter end of this brush cleansinto the grooves while the large diameter end cleans the lands of the tube’s rifling.ESGB-Q-050 Dual Diameter Spin-Grit Brush for tubes 1⁄2" (12.7mm) I.D. $5.95 ea. (Available in Bags of 15)ESGB-Q-062 Dual Diameter Spin-Grit Brush for tubes 5⁄8" (15.9mm) I.D. $5.95 ea. (Available in Bags of 15)ESGB-Q-075 Dual Diameter Spin-Grit Brush for tubes 3⁄4" (19.1mm) I.D. $5.95 ea. (Available in Bags of 15)ESGB-Q-100 Dual Diameter Spin-Grit Brush for tubes 1" (25.4mm) I.D. $5.95 ea. (Available in Bags of 15)

Note: 1⁄4" and 5 ⁄16" (6.4mm and 7.9mm) threaded brushes require a #C-1 Coupling, and 3⁄8" (9.5mm)

threaded brushes require a #C-2 Coupling to connect to GTC-701 Flexible Shafts. (Couplings supplied

with GTC-701 Flexible Shaft order.)

Note: 9 ⁄16"-1" (14.3-25.4mm) brushes can be used for both clockwise and counter-clockwise rotation.

Turbo Tip Helps Dislodge Deposit

Note: All Goodway brushes and buffing tools are

available with standard threaded tool couplings.

To order leave off the “Q” in the part number.

Please check your tube I.D.before placing order.

B

C

A

Tube O.D., I.D., and Gauge (B.W.G.)

A – Tube O.D. is the measured outside diameter of a tube.B – Tube I.D. is the measured inside diameter of a tube.C – Tube Gauge (B.W.G.) is the wall thickness of the tube.

DIGITALBORE CALIPER

ON PAGE 25

Each

Flexib

leFib

ergl

assR

odis

equi

pped

with

abr

asst

ipan

dis

idea

lfor

rem

ovin

gfo

reig

nm

ater

ials

tuck

insid

etu

bes.

Cust

omle

ngth

sare

avai

labl

e.QS

-ROD

-45

Flexib

leFib

ergl

assR

od,4

5',f

orre

mov

ing

fore

ign

obje

ctsf

rom

tube

s(cu

stom

leng

thsa

vaila

ble)

$270

.00

Flexi

ble

Fiber

glas

sRod

The

Good

way

Heav

y-Du

tyCo

ntra

ctor

Dolly

isde

signe

dfo

ruse

with

allR

AM-4

,RAM

-4X,

RAM

-5SF

,RA

M-6

,AW

T-10

0Xan

dAQ

-R15

00M

achi

nes.

Itfe

atur

esan

incr

ease

dhe

ight

,lar

gepn

eum

atic

tires

and

bum

pers

fore

asie

rman

euve

rabi

lity

and

stai

rclim

bing

abili

ty,a

stor

age

rack

forf

lexib

lesh

afts

and

wat

erho

ses,

and

ala

rge

stor

age

boxw

ithdr

aina

gefo

rbru

shes

and

othe

racc

esso

ries.

RAM

-DOL

LY-C

Heav

y-Du

tyCo

ntra

ctor

Dolly

$250

.00

Stor

age

Rack

Larg

ePn

eum

atic

Tire

s

Stor

age

Box

Stai

rG

lides

Shaf

tCl

ip

Heav

y-Du

tyCo

ntra

ctorD

olly

26w

ww

.goo

dway

.com

TUBECLEANERACCESSORIES

27Fo

rSal

esCa

ll:+1

-203

-359

-470

8Fa

x:+1

-203

-359

-960

1

TUBE CLEANER ACCESSORIES

Flexib

leSh

aftsa

ndAc

cesso

riesC

ontin

ued

The

GTC-

DPA

can

beus

edw

ithth

eRA

M-4

X,RA

M-4

X2A,

AWT-

100

and

AWT-

100X

Tube

Clea

ners

fort

here

cove

ryof

dryd

epos

its.A

fterc

onne

ctin

gth

eva

cuum

(see

page

56)t

heop

erat

orsim

plyi

nser

tsa

spec

iald

ryap

plica

tion

flexib

lesh

aft(

GTC-

721,

GTC-

721G

orGT

C-82

1)th

roug

hth

eDr

yPick

upAt

tach

men

tand

into

the

tube

.Whi

leth

eop

erat

orfe

edst

hero

tatin

gsh

aftt

hrou

ghth

etu

be,t

hecle

anin

gto

olbr

eaks

upde

posit

swhi

char

eim

med

iate

lypu

lled

into

the

vacu

umdr

um.

No

te:T

oo

rder

flex

ible

sh

aft

s,cl

ean

ing

too

lsa

nd

vacu

um

,see

pa

ges

18-2

9a

nd

64

.

GTC-

DPA

DryP

ickup

Atta

chm

enti

nclu

ding

2"x1

2'ho

sew

ithqu

ickco

nnec

tfitt

ing

(ord

erno

zzle

belo

w)

$185

.00

BFN

-152

SSt

raig

htBa

yone

tNoz

zle18

"lon

gfo

rtub

es13

⁄8",1

5 ⁄8",

2",2

1 ⁄2",

3"or

31⁄2"

(35m

m,4

1mm

,51m

m,6

4mm

,76m

mor

89m

m)O

.D.

$75.

00BF

N-1

52SA

Stra

ight

Bayo

netN

ozzle

18"(

460m

m)l

ong

fort

ubes

4"(1

02m

m)O

.D.

$150

.00

Flex

ible

Shaf

t

BFN

-152

SSt

raig

htB

ayon

etN

ozzl

e

Hos

eto

Vacu

um

Clea

ning

Tool

GTC

-DPA

Dry

Pick

upA

ttach

men

t

GTC-

DPA

Dry

Pick

upAt

tach

men

t

The

Good

way

Chill

erBi

bca

ptur

esdi

rtyw

ater

and

debr

isdu

ring

tube

clean

ing

oper

atio

ns,s

avin

gtim

ean

dm

oney

onpo

st-jo

bcle

anup

.The

unit

cons

ists

ofa

24"w

ide

x12

"dee

pre

usab

leal

umin

umfra

me

and

adi

spos

able

poly

bag.

Itis

avai

labl

ein

two

adju

stab

leco

nfig

urat

ions

,allo

win

gth

esy

stem

tobe

used

with

aw

ide

varie

tyof

chill

ers.

Inth

e“f

ree

stan

ding

”de

sign

,tw

oov

ersi

zed

soft

nylo

nbr

ushe

ssl

ide

into

the

chill

er’s

tube

sto

secu

rely

fast

enth

eCh

iller

Bib

toth

etu

besh

eet.

Thes

ebr

ushe

sal

sosli

dein

chan

nels

onth

efra

me,

allo

win

git

tom

ove

acro

ssth

etu

besh

eetf

orop

timum

posit

ioni

ng.A

doub

leed

geco

mbi

natio

nof

anEP

DMga

sket

with

ast

ripof

unde

rlyin

gny

lon

brist

les

prov

ides

fora

snug

fitag

ains

tan

irreg

ular

tube

shee

t.In

the

“por

tabl

est

and”

desig

n,th

efra

me

isat

tach

edto

a60

"tel

esco

ping

pole

and

stan

dto

posit

ion

the

Chill

erBi

bun

dert

hetu

besh

eet.

Inbo

thco

nfig

urat

ions

,the

poly

bag

feat

ures

a25

'int

egra

ted

hose

tofu

nnel

the

wat

eran

dde

bris

toth

ene

ares

tdra

in.

9401

Chill

erBi

bBa

g$1

9.50

9402

Chill

erBi

bFr

ame

$110

.00

LDS-

60-1

Chill

erBi

bFr

ame

with

60"T

eles

copi

ngPo

lean

dSt

and

$395

.00

BIB-

KIT-

3Ch

iller

Bib

Fram

ew

ithth

ree

Chill

erBi

bBa

gs$1

68.5

0BA

G-KI

T-10

Pack

age

ofte

nCh

iller

Bib

Bags

$195

.00

Pate

nted

Chille

rBib

™

Chill

erB

ibB

agw

ithFr

ame

and

Stan

d

Chill

erB

ibB

agw

ithFr

ame

12

3

Bras

sTub

ePl

ugs

Bras

sTu

bePl

ugs

Reco

mm

ende

dfo

rplu

ggin

gle

akin

gch

iller

and

heat

exch

ange

rtub

es5 ⁄8

",3 ⁄4

",7 ⁄8

"or

1"(1

5.9m

m,1

9.1m

m,2

2.2m

mor

25.4

mm

)O.D

.with

BWG

rang

es15

-22.

TP-0

62S

Bras

sTub

ePl

ugfo

rtub

es5 ⁄8

"(15

.9m

m)

O.D.

with

BWG

rang

es15

-22

$6.0

0ea

.

TP-0

75S

Bras

sTub

ePl

ugfo

rtub

es3 ⁄4

"(19

.1m

m)

O.D.

with

BWG

rang

es15

-22

$6.5

0ea

.TP

-087

SBr

assT

ube

Plug

fort

ubes

7 ⁄8"(

22.2

mm

)O.

D.w

ithBW

Gra

nges

15-2

2$7

.25

ea.

TP-1

00S

Bras

sTub

ePl

ugfo

rtub

es1"

(25.

4mm

)O.

D.w

ithBW

Gra

nges

15-2

2$8

.00

ea.

Air-o

pera

ted

equi

pmen

tw

illla

stlo

nger

and

run

mor

eef

ficie

ntly

with

prop

ertre

atm

ent

ofth

eai

rsup

ply.

No

te:A

llm

od

ule

sh

ave

1 ⁄2"

np

tp

ort

s.M

axi

mu

mp

res

su

re15

OP

SI.

Ma

xim

um

tem

per

atu

re14

0°F

.A

ird

isp

lace

men

t14

0C

FM

.

GTC-

705-

4Co

mbi

natio

nAi

rLub

ricat

or,F

ilter

and

Regu

lato

r$1

59.0

0

AirS

uppl

yHo

ses

Mad

efro

m1 ⁄2

"I.D

.abr

asio

nre

sista

ntbl

ackr

ubbe

r,Go

odw

ayAi

rSup

plyH

oses

prov

ide

high

CFM

airfl

owto

pneu

mat

icm

achi

nery

form

axim

umpo

wer

.The

ycan

beus

edfo

rava

riety

ofin

dust

riala

pplic

atio

ns.

No

te:M

axi

mu

mp

res

su

re2

00

PS

I.

ASH-

B50-

AAi

rSup

plyH

ose

forA

WT-

100

and

GSL-

705

$90.

00AS

H-B5

0-G

AirS

uppl

yHos

efo

rAW

T-10

0X,J

CLJe

tLau

nch,

JLJe

tLoa

d®,

LD-2

X2an

dQS

-300

Quick

Shot

$80.

00AS

H-B5

0-P

AirS

uppl

yExt

ensio

nHo

sefo

rPSM

-500

$80.

00AS

H-B5

0-E

AirS

uppl

yExt

ensio

nHo

sefo

rall

hose

slist

edab

ove

$80.

00W

ater

Supp

lyHo

seM

ade

from

5 ⁄8"I

.D.a

bras

ion

resis

tant

red

rubb

er,t

heGo

odw

ayW

ater

Supp

lyHo

sepr

ovid

eshi

gher

GPM

wat

erflo

wth

anco

nven

tiona

l1⁄2"

I.D.g

arde

nho

ses.

High

flow

isim

porta

ntfo

rade

quat

eflu

shin

gof

tube

san

dfo

rpro

vidin

gsu

fficie

ntvo

lum

eto

allG

oodw

ayeq

uipm

ent.

Use

with

wat

erup

to18

0°F.

Stay

sfle

xible

to-2

5°F.

Itis

idea

lfor

anya

pplic

atio

nre

quiri

nga

high

flow,

high

qual

ityho

se.

No

te:M

axi

mu

mp

res

su

re15

0P

SI.

WSH

-R50

Red

Rubb

erW

ater

Supp

lyHo

se5 ⁄8

"x50

'$6

5.00

Wat

erSu

pply

Hos

e

OilF

eed

Sigh

tGla

ssQu

ick

Rele

ases

forB

owls

6Ou

nce

Capa

city

Push

Butto

nDr

ains

OilF

eed

Adju

stm

entK

nob

5µm

Repl

acea

ble

Filte

r

Air

Pres

sure

Gaug

e

AirL

ubric

ator

,Filt

eran

dRe

gula

tor

Aira

ndW

ater

Supp

lyHo

ses

This

heav

y-du

ty26

"di

amet

erca

rryin

gba

gw

illfit

alls

izefle

xibl

esh

afts

asw

ella

sso

me

basi

cac

cess

orie

s.SB

-26

Carry

ing

Bag

$99.

00

Carr

ying

Bag

Air

Supp

lyH

ose

The

Good

way

Tube

Shee

tRef

acin

gKi

tcon

tain

sal

lthe

mat

eria

lsyo

une

edto

reco

nditi

onup

to40

sqft

oftu

besh

eet.

Afte

rtho

roug

hly

clean

ing

the

surfa

ceof

the

tube

shee

t,sim

ply

mix

the

two

part

epox

yan

dap

ply

toth

etu

besh

eet

with

aro

ller

orbr

ush.

Once

mix

ed,y

ouw

illha

veap

prox

imat

ely

45m

inut

esto

appl

yth

eep

oxy

toth

etu

besh

eet.

The

epox

yis

a10

0%so

lids

coat

ing

and

will

prov

ide

supe

riorp

rote

ctio

nto

the

tube

shee

t.TS

RKTu

beSh

eetR

efac

ing

Kiti

nclu

ding

2lit

erso

fbas

eep

oxya

nd1

liter

ofha

rden

erto

reco

nditi

onup

toa

40sq

ftar

ea,m

ixing

buck

etw

ithst

ick,s

crap

er,s

teel

brus

h,cu

pbr

ush

(foru

sew

itha

drill

–no

tinc

lude

d),t

wo

min

irol

lers

with

fram

e,3"

brist

led

brus

h,de

tail

brus

h,co

vera

llsu

it,ni

trile

glov

esan

da

plas

ticta

rpal

lin

a5

gallo

nbu

cket

$595

.00

Tire

dof

gues

sing

the

size

ofyo

urtu

bes

I.D.’s

?W

ithGo

odw

ay’s

DBC-

100

Digi

talB

ore

Calip

er,n

ever

gues

sag

ain!

This

sprin

glo

aded

devi

cew

illm

easu

retu

bes

I.D.’s

from

2 ⁄5"-1

1 ⁄5"

(10.

2mm

-30.

5mm

)with

anac

cura

cy±

0.00

2"(0

.051

mm

).A

float

ing

Zero

allo

ws

for

both

rela

tive

and

abso

lute

mea

sure

men

ts.I

tis

the

best

tool

tohe

lpas

sure

corr

ect

scru

bber

and

brus

hsi

zing

.

How

ItW

orks

Turn

onth

eun

itan

dse

titt

oei

ther

inch

esor

mill

imet

ers.

Toca

libra

teth

epr

obe,

push

the

slide

upun

tilit

hits

the

stop

and

then

push

the

Zero

butto

n.W

ithth

eca

liper

sclo

sed,

inse

rtth

epr

obe

into

the

tube

tobe

mea

sure

dan

dre

leas

eth

esl

ide.

The

tube

’sI.D

.will

bedi

spla

yed

onth

eLC

D.

Spec

ifica

tions

Mea

sure

men

ts:

2 ⁄5"-1

1 ⁄5"(

10.2

mm

-30.

5mm

)I.D

.Acc

urac

y±

0.00

2"(0

.051

mm

)Ba

ttery

Pow

er:

1.5

V,35

7/SR

-44

Prob

eDi

men

sion

s:6"

Long

Wei

ght:

0.5

lbs

DBC-

100

Digi

talB

ore

Calip

er,i

nclu

ding

calib

ratio

nrin

gan

dca

rryin

gca

se$4

95.0

0

•Re

adin

gsdi

spla

yed

inin

ches

orm

illim

eter

sto

±0.

002"

(0.0

51m

m)

•Sp

ring

load

edst

opal

low

sfo

rea

sym

easu

rem

ento

ftap

ers

upto

6"lo

ng!

Tube

Guar

d™Tu

beFil

ters

Asia

ncla

ms,

Zebr

am

usse

ls,pi

pesc

ale,

stick

s,ro

cks,

leav

es,w

ater

line

slag

and

othe

rdeb

risca

nre

stric

twat

erflo

wan

dre

duce

heat

exch

ange

ref

ficie

ncy.

Good

way

Tube

Guar

dtu

befil

ters

help

mai

ntai

nhe

atex

chan

gere

fficie

ncy

bypr

even

ting

muc

hof

thes

em

ater

ials

from

ente

ring

the

tube

s.Th

ese

dura

ble

poly

prop

ylen

efil

ters

feat

ure

seve

rall

arge

open

ings

,des

igne

dto

help

prev

ent

mac

rofo

ulin

gby

capt

urin

gon

lyth

ede

bris

that

wou

ldclo

gth

etu

bes,

allo

win

gth

esm

alle

rdeb

risto

harm

less

lypa

ssth

roug

hth

etu

bes.

They

have

ash

ortp

rofil

ew

hich

prov

ides

forl

ess

build

upof

debr

ison

the

tube

shee

tand

easie

rcle

anin

g.

Feat

ures

–Be

nefit

sPo

lypro

pyle

neco

nstru

ctio

n–Du

rabl

eSa

fe–W

illno

tdam

aget

ubes

Larg

eope

ning

s–ke

epso

utla

rger

,tube

clog

ging

debr

isan

dallo

wst

hepa

ssag

eofs

malle

rdeb

risSh

ortp

rofil

e–Le

ssde

bris

build

upon

thet

ube

shee

tpro

vidin

gfor

easie

rcle

anin

g

Part

Tube

Tube

Num

ber

O.D

.G

age

I.D.

TG-0

87-1

80.

875"

180.

777"

TG-0

87-2

00.

875"

200.

805"

TG-1

00-1

81.

000"

180.

902"

TG-1

00-2

01.

000"

200.

930"

Call

forp

rices

and

quan

tityd

isco

unts

.24

ww

w.g

oodw

ay.c

om

TUBECLEANERACCESSORIES

25TUBE CLEANER ACCESSORIES

Flexib

leSh

aftsa

ndAc

cesso

riesC

ontin

ued

The

Good

way

Shaf

tLub

ricat

oral

low

sfo

rfas

t,ea

sypr

otec

tion

offle

xibl

esh

afts

inbe

twee

nus

es.

Sim

ply

fill

the

lubr

icat

orw

ithw

ater

-sol

uble

lubr

ican

t,co

nnec

tth

efle

xibl

esh

aft

and

atta

cha

com

pres

sed

air

line

[max

imum

150

PSI–

quic

kco

nnec

tfit

sGo

odw

ayai

rlin

e#A

SH-B

50-A

–se

epa

ge27

].Th

eflo

wof

aira

ndlu

bric

antd

ispl

aces

wat

eran

dco

ats

the

shaf

tco

reto

prot

ecti

tfro

mha

rmfu

lrus

tand

corro

sion

.Lub

rican

tflu

shes

outw

ithw

ater

whe

nsh

aft

isus

edag

ain.

GSL-

705

Flexib

leSh

aftL

ubric

ator

with

quick

conn

ect

$110

.00

GSL-

LU1

Lubr

icant

forf

lexib

lesh

aftl

ubric

ator

,16

ounc

es$1

0.00

Crim

ping

Bloc

kGo

odw

ay’s

Crim

ping

Bloc

kpr

ovid

esth

eus

erw

ithqu

ick,

conv

enie

ntm

etho

dsfo

rper

form

ing

repa

irsof

flexi

ble

shaf

tsin

the

field

.Use

dpr

oper

ly,ea

chw

illpe

rman

ently

atta

chre

pair

coup

lings

,ext

endi

ngth

elif

eof

the

flexib

lesh

aft

whi

lere

duci

ngdo

wnt

ime

whe

na

repa

iris

need

ed.

GTC-

CT5

Crim

ping

Bloc

kwith

punc

h$4

9.50

GTC-

CTP

Repl

acem

ent

Punc

h$8

.00

Flexib

lesh

aftr

epai

rkits

inclu

defo

urdr

iveen

dre

pair

coup

lings

,fou

rthr

ustw

ashe

rs,f

ourt

oole

ndre

pair

coup

lings

,one

crim

ping

tool

with

punc

h,on

efle

x-ib

lesh

aftl

ubric

ator

with

quick

disc

onne

ct,a

ndtw

obo

ttles

[16

ounc

esea

ch]o

flub

rican

tfor

flexib

lesh

aftl

ubric

ator

.

Flex

ible

Shaf

tRep

airK

itsRE

P-70

1-KI

TFo

rGTC

-701

Shaf

ts$2

29.5

0RE

P-70

2-KI

TFo

rGTC

-702

Shaf

ts$2

29.5

0RE

P-70

2-KI

TQFo

rGTC

-702

QSh

afts

with

quick

conn

ectf

ittin

gs$2

99.5

0RE

P-70

3-KI

TFo

rGTC

-703

Shaf

ts$2

29.5

0RE

P-70

3-KI

TQFo

rGTC

-703

QSh

afts

with

quick

conn

ectf

ittin

gs$2

99.5

0RE

P-70

4-KI

TFo

rGTC

-704

Shaf

ts$2

29.5

0RE

P-70

4-KI

TQFo

rGTC

-704

QSh

afts

with

quick

conn

ectf

ittin

gs$2

99.5

0RE

P-72

0-KI

TFo

rGTC

-720

Shaf

ts$2

57.5

0

Flex

ible

Shaf

tDriv

eEn

dRe

pair

Coup

lings

713-

1Cr

imp

Coup

ling

forG

TC-7

01Sh

afts

$6.5

071

3-2

Crim

pCo

uplin

gfo

rGTC

-702

Shaf

ts$6

.50

713-

3Cr

imp

Coup

ling

forG

TC-7

03Sh

afts

$6.5

071

3-5

Crim

pCo

uplin

gfo

rGTC

-704

Shaf

ts$6

.50

713-

4Cl

amp

Coup

ling

forG

TC-7

20,G

TC-7

21,

GTC-

721G

and

GTC-

821

Shaf

ts$1

3.50

Stan

dard

Thre

adTo

olEn

dRe

pair

Coup

lings

717-

1Cr

imp

Coup

ling

forG

TC-7

01Sh

afts

$6.0

071

7-2

Crim

pCo

uplin

gfo

rGTC

-702

Shaf

ts$6

.00

717-

3Cr

imp

Coup

ling

forG

TC-7

03Sh

afts

$6.0

071

7-6

Crim

pCo

uplin

gfo

rGTC

-704

Shaf

ts$6

.00

717-

4Cr

imp

Coup

ling

forG

TC-7

20,G

TC-7

21,

GTC-

721G

and

GTC-

821

Shaf

ts$6

.00

Quic

kCo

nnec

tToo

lEnd

Repa

irCo

uplin

gs71

7-2Q

Crim

pCo

uplin

gfo

rGTC

-702

Shaf

tsw

ithqu

ickco

nnec

tfitt

ings

$23.

5071

7-3Q

Crim

pCo

uplin

gfo

rGTC

-703

Shaf

tsw

ithqu

ickco

nnec

tfitt

ings

$23.

5071

7-6Q

Crim

pCo

uplin

gfo

rGTC

-704

Shaf

tsw

ithqu

ickco

nnec

tfitt

ings

$42.

00

Shaf

tLub

ricat

or

Crim

ping

Tool

sfor

Flexi

ble

Shaf

tRep

air

Flexi

ble

Shaf

tRep

airC

oupl

ingsa

ndKi

ts

ForS

ales

Call:

+1-2

03-3

59-4

708

Fax:

+1-2

03-3

59-9

601

Shaf

tCut

ting

and

Crim

ping

Pres

s

NEW

Shaf

tCut

ting

and

Crim

ping

Pres

sTh

eSh

aft

Cutti

ngan

dCr

impi

ngPr

ess

issp

ecifi

cally

desi

gned

for

use

with

Good

way

GTC-

701,

GTC-

702

and

GTC-

703

Flexib

leSh

afts

.Th

isun

ique

tool

will

allo

wth

eus

erto

quick

lycu

tan

dre

pair

flexib

lesh

afts

inth

efie

ldw

ithou

tthe

use

ofan

yoth

erto

ols.

PCC-

BASE

Shaf

tCut

ting

and

Crim

ping

Pres

s(ba

seon

ly)$5

10.0

0No

te:C

rimpin

gdi

esno

tinc

luded

.Cr

impi

ngDi

es:

DIE-

SET-

701

ForG

TC-7

01Sh

afts

$85.

00DI

E-SE

T-70

2Fo

rGTC

-702

Shaf

ts$8

5.00

DIE-

SET-

703

ForG

TC-7

03Sh

afts

$85.

00

NEW

NEW

6"Di

gita

lBor

eCa

liper

Tube

Shee

tRef

acing

Kit

23For Sales Call: +1-203-359-4708

Fax: +1-203-359-9601

TUBE

CLEA

NER

ACCES

SO

RIES

Wet/Dry ApplicationsFlexible Shafts (Nylon Casing) for Tubes 1⁄4"- 3⁄8" (6.4-9.5mm) I.D.GTC-701-12 Flexible Shaft 12' (3.7m) $155.00GTC-701-25 Flexible Shaft 25' (7.6m) $190.00

Flexible Shafts Shown Below Come with Quick Connect FittingsFlexible Shafts (Nylon Casing) for Tubes 7⁄16"- 1⁄2" (11.1-12.7mm) I.D.GTC-702Q-12 Flexible Shaft 12' (3.7m) $170.00GTC-702Q-17 Flexible Shaft 17' (5.2m) $185.00GTC-702Q-25 Flexible Shaft 25' (7.6m) $215.00GTC-702Q-35 Flexible Shaft 35' (10.7m) $250.00GTC-702Q-45 Flexible Shaft 45' (13.7m) $285.00Flexible Shafts (Nylon Casing) for Tubes 9⁄16"-1" (14.3-25.4mm) I.D.GTC-703Q-12 Flexible Shaft 12' (3.7m) $185.00GTC-703Q-17 Flexible Shaft 17' (5.2m) $205.00GTC-703Q-25 Flexible Shaft 25' (7.6m) $240.00GTC-703Q-35 Flexible Shaft 35' (10.7m) $280.00GTC-703Q-45 Flexible Shaft 45' (13.7m) $320.00GTC-703Q-60 Flexible Shaft 60' (18.3m) $380.00GTC-703Q-75 Flexible Shaft 75' (22.9m) $440.00Flexible Shafts (Nylon Casing) for Tubes 11⁄16"-1" (17.5-25.4mm) I.D.GTC-704Q-12 Flexible Shaft 12' (3.7m) $240.00GTC-704Q-17 Flexible Shaft 17 (5.2m)' $260.00GTC-704Q-25 Flexible Shaft 25' (7.6m) $295.00GTC-704Q-35 Flexible Shaft 35' (10.7m) $335.00GTC-704Q-45 Flexible Shaft 45' (13.7m) $380.00GTC-704Q-60 Flexible Shaft 60' (18.3m) $465.00GTC-704Q-75 Flexible Shaft 75' (22.9m) $525.00

Note: GTC-702Q, GTC-703Q and GTC-704Q Flexible Shafts are availablewith standard threaded tool couplings. To order leave off the “Q” in thepart number.Note: GTC-703, GTC-703Q, GTC-704 and GTC-704 Flexible Shafts for usewith a RAM-5SF Speed-Feed Tube Cleaner require a special shaft stop.To order, add the suffix R5 to the part number and $20.00 to the price.Flexible Shafts (Nylon Casing) for Tubes 1" (25.4mm) I.D. and UpGTC-720-15 Flexible Shaft 15' (4.6m) $310.00GTC-720-25 Flexible Shaft 25' (7.6m) $370.00GTC-720-35 Flexible Shaft 35' (10.7m) $450.00GTC-720-50 Flexible Shaft 50' (15.2m) $525.00

Dry ApplicationsFlexible Shafts (Covered Steel Casing) for Tubes1" (25.4mm) I.D. and UpGTC-721-15 Flexible Shaft 15' (4.6m) $395.00GTC-721-25 Flexible Shaft 25' (7.6m) $485.00GTC-721-35 Flexible Shaft 35' (10.7m) $575.00GTC-721-50 Flexible Shaft 50' (15.2m) $695.00Flexible Shafts (Heat Resistant 300 0F RigidCovered Steel Casing) for Tubes 1" (25.4mm) I.D. and UpGTC-721G-15 Flexible Shaft 15' (4.6m) $440.00GTC-721G-25 Flexible Shaft 25' (7.6m) $560.00GTC-721G-35 Flexible Shaft 35' (10.7m) $675.00GTC-721G-50 Flexible Shaft 50' (15.2m) $850.00Flexible Shafts (High Temperature Tolerant 450 0FStainless Steel Casing) for Tubes 1" (25.4mm) I.D. and UpGTC-821-15 Flexible Shaft 15' (4.6m) $395.00GTC-821-25 Flexible Shaft 25' (7.6m) $485.00GTC-821-35 Flexible Shaft 35' (10.7m) $575.00GTC-821-50 Flexible Shaft 50' (15.2m) $695.00

GTC-721

GTC-721G

GTC-821

www.goodway.com

Quick ConnectTool Coupling

ThreadedTool Coupling

GTC-701/GTC-702/GTC-703/GTC-704/GTC-720