GRAVITY SEWER RETICULATION - Home - South East …southeastwater.com.au/.../Approved_Products-Sewer.pdfPolyethylene (PE) Pipe Butt/Butt – solid wall ..... 61 POLYETHYLENE FITTINGS

GRAVITY SEWER RETICULATION

Products Catalogue

South East Water Sewer Products Catalogue-Version 7 Page 2 of 104

Contents

CONTENTS ................................................................................................................. 2

DOCUMENT HISTORY ............................................................................................... 8

The following information indicates the changes made to this document: .............. 8

ABOUT THIS CATALOGUE ....................................................................................... 9

Intended audience .................................................................................................. 9 Related reference material ..................................................................................... 9 Organisation of this catalogue .............................................................................. 10 Ordering of non-stock products ............................................................................ 10

PVC PIPELINE SYSTEM – PLAIN & SANDWICH WALL ....................................... 11

PVC PIPES – PLAIN & SANDWICH WALL .......................................................... 11 Plain wall PVC Pipe (SCJ) .................................................................................... 11 Plain wall PVC Pipe (RRJ) .................................................................................... 11 Sandwich Construction PVC Pipe SC (SCJ) ........................................................ 12

PVC SEWER BENDS & ELBOWS ........................................................................... 13

Plain Bends & Elbows SOC-SOC (SCJ) ............................................................... 13 Variable Bends (SCJ) (Long Radius Bend) .......................................................... 14 Plain Bends & Elbows SOC- SPIG (SCJ) ............................................................. 14 Bends & Elbows SOC-SOC (RRJ) ....................................................................... 15 Bends & Elbows SOC-SPIG (RRJ) ....................................................................... 16 Access Chamber Drop Bend (Moulded) ............................................................... 16 Access Chamber Drop Bend (Fabricated) ............................................................ 16

PVC SEWER JUNCTIONS ....................................................................................... 17

Junctions SOC- SOC- SOC (SCJ) ........................................................................ 17 Junctions SOC-SOC-SPIG (SCJ) ......................................................................... 18 Junction – 45º (Threaded) (SCJ) .......................................................................... 19 Curved Square Junction – (SCJ) .......................................................................... 19 Sweep Junction with Inspection Opening -– (SCJ) ............................................... 19 Junctions SOC-SOC-SPIG (RRJ) ......................................................................... 20 Junctions SOC-SOC-SOC (RRJ) ......................................................................... 20

PVC SEWER TEES .................................................................................................. 22

Inspection Tees with Two Threaded Caps SOC-SOC-SOC (SCJ) ...................... 22 Inspection Tees with Cap SOC-SOC-SOC (RRJ) ................................................ 22 Inspection Tees with 2 Threaded Caps SOC-SPIG-SOC (SCJ) .......................... 22

TAPERS .................................................................................................................... 23

Tapers Eccentric SPIG - SOC (SCJ) .................................................................... 23 Tapers Eccentric SPIG - SOC (RRJ) .................................................................... 23

CONNECTORS ......................................................................................................... 24

Plain Coupling –SOC (SCJ) TO SOC (SCJ) ......................................................... 24 MH Coupling SOC - SPIG (RRJ) .......................................................................... 24 Manhole Coupling – SOC (RRJ) TO SOC (SCJ) .................................................. 25


MH Connector SPIG – SPIG ................................................................................ 25 Plain Short PVC SOC (RRJ) - SPIG ..................................................................... 25 VC SOC (RRJ) – PVC Plain Wall SOC (RRJ) Adaptors ....................................... 26 VC SPIG (RRJ) – PVC Plain Wall SOC (SCJ) Adaptors ...................................... 26 PVC Plain Wall – VC Bushes (Adaptors) .............................................................. 26 SPIG - SOC (SCJ) Threaded Access Coupling .................................................... 27 SOC - SOC (SCJ) Threaded Access Coupling ..................................................... 27 Slip Coupling SOC (RRJ) - SOC (RRJ) ................................................................ 27 Plain Coupling – SOC (RRJ) - SOC (RRJ) ........................................................... 28 Saddle (SCJ) ........................................................................................................ 28

END SEALS .............................................................................................................. 29

SCJ Cap ............................................................................................................... 29 Threaded Cap ....................................................................................................... 29 Socket Plug ........................................................................................................... 29

PVC PIPELINE SYSTEM – RIBBED WALL ............................................................. 30

PVC PIPES - RIBBED WALL ............................................................................... 30 Ribbed Wall PVC Pipe (RW) (RRJ) ...................................................................... 30

PVC SEWER BENDS & ELBOWS – RIBBED WALL .............................................. 31

Ribbed Wall PVC Bends & Elbows SOC-SOC (RRJ) ........................................... 31

PVC SEWER JUNCTIONS – RIBBED WALL .......................................................... 32

Ribbed Wall PVC Junctions SOC-SOC-SOC (RRJ - SCJ Branch) ...................... 32 Ribbed Wall PVC Junctions SOC-SOC-SOC (RRJ Branch) ................................ 32

PVC SEWER TEES – RIBBED WALL ..................................................................... 33

Ribbed Wall PVC Inspection Tees with Threaded Cap SOC-SOC-SOC (SCJ Br) 33

TAPERS – RIBBED WALL ....................................................................................... 34

Ribbed Wall PVC Tapers Eccentric SOC - SOC (RRJ) ........................................ 34

CONNECTORS – RIBBED WALL ............................................................................ 35

Ribbed Short PVC SOC (RRJ) - SPIG ................................................................. 35 PVC Ribbed Wall – VC Bushes (Adaptors) .......................................................... 35 PVC Ribbed Wall SOC (RRJ) - VC SOC (RRJ) Adaptors .................................... 35 PVC Ribbed Wall SOC TO PVC Plain Wall SOC (RRJ) Adaptors ....................... 36 Ribbed Wall PVC Slip Coupling SOC (RRJ) - SOC (RRJ) ................................... 36 Ribbed Wall PVC Plain Coupling SOC (RRJ) - SOC (RRJ) ................................. 36

END SEALS – RIBBED WALL ................................................................................. 37

RRJ Caps for Ribbed Wall PVC Pipe ................................................................... 37 Ribbed Wall PVC Socket Plug .............................................................................. 37

ELASTOMERIC SEALS ........................................................................................... 38

PVC JOINTING AND SOLVENT WELDING FLUIDS .............................................. 39

GLASS REINFORCED PLASTIC (GRP) PIPELINES SYSTEMS ............................ 40

GRP Pipe SPIG-SPIG (RRJ) ................................................................................ 40 CC GRP Pipe ........................................................................................................ 40 Collars (RRJ) ........................................................................................................ 41 Access Chamber Connector (RRJ) ...................................................................... 42


Saddle Tee Junction ............................................................................................. 42 Saddle Slope Junction – 30o and 45o ................................................................... 43 Tees Spig-Spig-Spig (RRJ) .................................................................................. 44 Bends SPIG-SPIG (RRJ) ....................................................................................... 44 Adaptors GRP/VC Soc-Soc or Soc-Spig .............................................................. 45 Adaptors GRP/PVC (SCJ) .................................................................................... 45 Adaptors GRP/PVC (RRJ) .................................................................................... 45 Other Fittings (RRJ) .............................................................................................. 45

POLYPROPYLENE PROFILE WALL SYSTEM ....................................................... 46

PIPES ................................................................................................................... 46 Polypropylene (PP) Profile Wall Pipe SOC-SPIG (RRJ) ...................................... 46 FITTINGS - Polypropylene ................................................................................... 46 Tees (Square Junctions) PP 90° SOC-SOC-SOC (RRJ) ..................................... 46 Threaded Inspection Tees & Caps PP 90° SOC-SOC-SOC (RRJ - Thread) ....... 47

JUNCTIONS PP ........................................................................................................ 48

Slope Junction PP- 45o, SOC-SOC-SOC (RRJ) ................................................... 48 Slope Junction PP- 88o, SOC-SOC-SOC (RRJ) ................................................... 48

BENDS PP ................................................................................................................ 50

Bends - PP Mitred (2 or 3 cut) SOC-SPIG (RRJ) – (Not Approved) ..................... 50 Bends - PP SOC-SOC (RRJ) ............................................................................... 50

COUPLINGS PP ....................................................................................................... 51

Couplings PP- 88o SOC-SOC (RRJ) .................................................................... 51 Adaptor Couplings PP- VC SOC-SOC (RRJ) ....................................................... 51 Adaptor Couplings PP- PVC SOC-SOC (RRJ-SCJ) ............................................. 51 Adaptor Couplings PP- PVC SOC-SOC (RRJ-RRJ) ............................................ 52 Repair Clamp ........................................................................................................ 52 Joiner Clamp ......................................................................................................... 52 Reducing Junction 45° .......................................................................................... 53

FITTINGS - PVC-U COMPOSITE ............................................................................. 54

TEES PVC-U COMPOSITE .................................................................................. 54 Tees PVC-U Composite- 90o SOC–SOC–SOC (RRJ) ......................................... 54 BENDS PVC-U COMPOSITE ............................................................................... 55 Bends PVC-U Composite Mitred (2 or 3 cut) SOC-SPIG (RRJ) ........................... 55 Bends PVC-U Composite Mitred (2 or 3 cut) SOC-SOC (RRJ) ............................ 55

COUPLINGS PVC-U COMPOSITE .......................................................................... 56

Plain Coupling PVC-U Composite SOC-SOC (RRJ) ............................................ 56 Adaptor PVC-U Composite SOC (RRJ) – PVC SOC (RRJ) ................................. 56 Adaptor PVC-U Composite (RRJ) – PVC SOC (SCJ) .......................................... 56 Eccentric Taper PVC-U Composite SOC-SOC (RRJ) .......................................... 57 Concentric Taper PVC-U Composite SOC-SOC (RRJ) – Not Approved .............. 57

END SEALS .............................................................................................................. 58

End Caps PVC-U Composite SOC (RRJ) ............................................................ 58

FITTINGS - GRP (GLASS REINFORCED PLASTIC) .............................................. 59

BENDS GRP ......................................................................................................... 59 Bends GRP Mitred (1, 2 or 3 cut) SOC-SOC (RRJ) ............................................. 59


TEES GRP ............................................................................................................ 59 Tees GRP 90o SOC–SOC–SOC (RRJ) ................................................................ 59 JUNCTIONS GRP ................................................................................................ 60 Junctions GRP 45o SOC-SOC-SOC (RRJ) .......................................................... 60

POLYETHYLENE PLAIN WALL SYSTEMS ............................................................ 61

POLYETHYLENE PIPES ...................................................................................... 61 Polyethylene (PE) Pipe Butt/Butt – solid wall ........................................................ 61

POLYETHYLENE FITTINGS – BUTT WELDED ...................................................... 62

Butt Welded Fittings .............................................................................................. 62 Bends .................................................................................................................... 62 Tees ...................................................................................................................... 62 Oblique Junctions ................................................................................................. 63 Reducers – Eccentric ............................................................................................ 63 Plain Stub Flanges ................................................................................................ 63 Metal Backing Rings for PE Stub Flanges – (galvanised steel) ............................ 64 Plain End Caps ..................................................................................................... 65 Maintenance Hole Couplings ................................................................................ 65

POLYETHYLENE FITTINGS – ELECTROFUSION WELDED ................................. 66

Electrofusion Fittings ............................................................................................ 66 Couplings PE100 .................................................................................................. 66 Bends .................................................................................................................... 67 Tees ...................................................................................................................... 67 Plain Stub Flanges ................................................................................................ 68 End Plugs ............................................................................................................. 68 Repair Saddle – (for operational use only) ........................................................... 68 PE Property Branch Assemblies ........................................................................... 68 PE fittings for profiled walled Polypropylene sewerage pipelines ......................... 70 Use of Butt Welded Fittings with Electrofusion joints ............................................ 70

VITRIFIED CLAY SYSTEM ...................................................................................... 71

Vitrified Clay Socketless system ........................................................................... 71 Pipes ..................................................................................................................... 71 Vitrified clay pipe (socketless) (RRJ) .................................................................... 71 Fittings (RRJ) ........................................................................................................ 71 Bend ..................................................................................................................... 71 Jointing coupling SOC-SOC (RRJ) ....................................................................... 72 Jointing Ring ......................................................................................................... 72 Slip coupling SOC-SOC (RRJ) ............................................................................. 72 VC-PVC Adaptors SOC-SOC (RRJ) ..................................................................... 73 Curved Square Junction 90º SPIG-SPIG-SPIG (RRJ) ......................................... 73 Junctions SPIG-SPIG-SPIG (RRJ) ....................................................................... 73 Junctions Square .................................................................................................. 74 Plug ....................................................................................................................... 74 Concentric Taper Pipe .......................................................................................... 75

VITRIFIED CLAY SOCKETED SYSTEM ................................................................. 76

Vitrified Clay Pipe SOC-SPIG (RRJ) .................................................................... 76 Rocker Pipes SOC-SPIG (RRJ) ........................................................................... 76 Concentric Taper Pipe – (Not Approved for Use) ................................................. 77


BENDS PP ............................................................................................................ 77 Bends SOC-SPIG (RRJ) ....................................................................................... 77 Junctions SPIG-SPIG-SPIG (RRJ) ....................................................................... 78

VITRIFIED CLAY PIPE JACKING SYSTEM ............................................................ 79

Vitrified Clay Jacking Pipe SPIG-SPIG (RRJ) ...................................................... 79 Vitrified Clay Jacking Rocker Pipe SPIG-SPIG (RRJ) .......................................... 79 Vitrified Clay Jacking Pipe to Vitrified Clay Conventional Pipe Adaptors SPIG-SPIG (RRJ)

.................................................................................................................................. 80 Vitrified Clay Jacking Pipe Polypropylene Couplings (RRJ) ................................. 80 Vitrified Clay Jacking Pipe SS Couplings (RRJ) ................................................... 80 Vitrified Clay Jacking Pipe SS Band Seal/Repair Couplings (RRJ) ...................... 81

DUCTILE IRON PIPELINE SYSTEM – (NOT GENERALLY APPROVED FOR USE)82

Ductile Iron Pipe ................................................................................................... 82 Ductile iron cement lined (DICL) ........................................................................... 82 Ductile iron internally lined with polyurethane ....................................................... 82 Ductile iron fittings ................................................................................................ 82

STEEL PIPELINE SYSTEMS – (NOT GENERALLY APPROVED FOR USE) ........ 83

Pipes ..................................................................................................................... 83 Pipe - Cement lined and externally coated ........................................................... 83 Fusion Bonded Polyethylene Coated and Lined ................................................... 83 Steel Fittings ......................................................................................................... 83 Cement lined and Externally Coated .................................................................... 83

ABS PIPELINE SYSTEMS – (NOT APPROVED FOR USE) ................................... 85

ABS Pipe (SCJ) .................................................................................................... 85 ABS Fittings (SCJ) ................................................................................................ 85

MAINTENANCE STRUCTURES .............................................................................. 86

ACCESS CHAMBER SYSTEMS .......................................................................... 86 Precast Concrete Maintenance Hole Systems ..................................................... 86 Mastic Jointed System .......................................................................................... 86 Rubber Ring Jointed System – (Not currently approved) ..................................... 87

MAINTENANCE SHAFTS ........................................................................................ 88

PVC Maintenance shaft ........................................................................................ 88 Polypropylene Maintenance Shaft Base ............................................................... 88 Polyethylene Maintenance Shaft Base ................................................................. 89 Precast Concrete Maintenance Shaft ................................................................... 89 Polypropylene Maintenance Shaft ........................................................................ 89 Approved Iplex EZipit™ product components ...................................................... 90

MAINTENANCE HOLE – ACCESSORIES ............................................................... 92

Access Chamber Fittings ...................................................................................... 92 Clamps – for access chamber drop ...................................................................... 92 Ladder ................................................................................................................... 93 Ladder fixing component – floor fixing attachment ............................................... 93 Ladder fixing component – holdfast, wall attachment ........................................... 93 Ladder fixing component – splice plate ................................................................ 94 Masonry fasteners ................................................................................................ 94


Stepiron ................................................................................................................ 95 Protective MH Coatings ........................................................................................ 95 Maintenance Hole Fittings .................................................................................... 96

ACCESS COVERS ................................................................................................... 97

Access cover and frame ....................................................................................... 97 Access chamber tops (cover & frame) - precast ................................................... 99 Inspection cover .................................................................................................... 99 Cover adjustment rings ....................................................................................... 100

MISCELANEOUS ................................................................................................... 101

Jointing coupling (Type B) .................................................................................. 101 Stainless Steel OB band ..................................................................................... 101 Flap-Gate – Water & Gas Seal for Emergency Relief Structures (ERS’s) .......... 102 Grease – Seal MH covers ................................................................................... 102 Carrier Pipe Spacer ............................................................................................ 102 Hydrophilic Rubber ............................................................................................. 102 Geotextile fabric .................................................................................................. 103

CEMENT, CONCRETE & QUARRY PRODUCTS .................................................. 104


Document History

The following information indicates the changes made to this document: Date Version Status Description 23 January 2007 Draft 6 March 2007 1 Final 16 January 2008 2 Revised Colour of PE pipes altered;

The use of Retrofit MH covers restricted; SS rebar permitted in fabrication of SS ladders;

14 April 2008 3 Revised Additional PP profile wall pipe added; General revisions to:

Maintenance shafts,

Maintenance hole covers; &

Protective MH coatings

6 June 2008 4 Revised Flapgate for ERS included 6 January 2009 5 Revised Ribbed wall PVC pipe – a special condition has been added re

not removing the ribs. MH grease supplier’s name changed; SewerPRO pipes and fittings removed until further notice; & Hepworth Telescopic MS removed until further notice

25 June 2010 6 Revised Major revision and update of Version 5 product catalogue. Includes a comprehensive update of new and existing products throughout the catalogue.

1 May 2011 7 Revised Hygrade UBER DI Access Cover Australian Plastic Profiles Pty Ltd (Pipe King) PVC Pipes and Fittings Carrier Pipe Spacer Kwik-Zip HD Series Geofabrics Australsia Pty Ltd (bidim A14, bidim A24)


About This Catalogue

This catalogue lists all the products currently accepted by South East Water (SEW) for use in its sewerage reticulation system. South East Water does not give preference to any particular make or type of product and South East Water may include equivalent products in the catalogue if satisfied that those products comply with the relevant standards or specifications and conform to South East Water’s Product Approval Criteria. Relevant standards include, but are not limited to Australian Standards, WSAA Purchase Specifications and Water Industry Specifications. Manufacturers of suitable products not listed in this catalogue may apply directly to South East Water to have their product listed. Changes may be made periodically to the information in this catalogue. Products may be withdrawn or added to the catalogue from time to time. For current information users should refer to the latest version located on the South East Water website. South East Water will assume no responsibility for any errors that may appear in this catalogue or any damages arising out of the use or inability to use this document. Other products not listed in this catalogue may be used in specific projects with the approval of South East Water. Regardless of whether they may be approved for use, products may only be used in accordance with the standard drawings in the Melbourne Retail Water Agencies (MRWA) Editions of the Water Services Association of Australia (WSSA) Sewerage Code of Australia WSA – 02 2002. Please note that not all products and materials appraised by WSAA are approved for use in South East Water pipeline systems. Unless otherwise stated, all dimensions are in millimetres (mm).

Intended audience This catalogue is intended for SEW personnel, consultant engineers and contractors engaged in the design, construction and maintenance of SEW’s gravity sewage system. It is also intended for use by suppliers of products used in SEW’s sewerage system.

Related reference material The information in this catalogue should be read in conjunction with:

Melbourne Retail Water Agencies (MRWA) Editions of the Water Services Association of Australia (WSSA) Sewerage Code of Australia WSA – 02 2002.

The Water Services Association of Australia (WSAA) Purchase Specifications (refer http://www.wsaa.asn.au / National Codes / Purchase Specifications).

The Water Services Association of Australia (WSAA) Product and Material Information Guidance Notes (refer http://www.wsaa.asn.au / National Codes / Purchase Specifications).


Organisation of this catalogue

The information for each product in this catalogue is formatted as shown below.

Heading Description

Material This lists the materials used in the manufacture of the product.

Brand(s) This lists the brand name of approved products that are known to comply with water company requirements.

Special conditions

This lists any limitations that may apply to the use of the product.

Purchase specifications relevant to products are listed at the beginning of each product category.

Ordering of non-stock products

A number of products in this catalogue are non-stock items and users should be aware that significant lead times may be required in ordering these products.


PVC PIPELINE SYSTEM – PLAIN & SANDWICH WALL

SPECIFICATION -WSA PS-230 PVC-U Non-Pressure Pipe & Fittings -WSA PS-236 Variable Bend, Post-Formed PVC Non-Pressure & Fittings

PVC PIPES – PLAIN & SANDWICH WALL

Plain wall PVC Pipe (SCJ)

Material PVC

Brand(s)

Crevet

Iplex

Vinidex

Tyco (D-Flo)

Pipemakers (Metroll Queensland P/L)

Australian Plastic Profiles Pty Ltd (Pipe King)

Special Conditions Minimum Stiffness Class SN 8 >100mm diameter pipe.

Minimum Stiffness Class SN 10 for 100mm diameter pipe.

Solvent cement jointed pipes are used for sizes 300 mm and smaller. For larger sizes rubber ring jointed (RRJ) pipes are used.

Not for use within or downstream of industrial or commercial areas.

Cream coloured pipes and fittings

Nominal size (DN) Crevet Iplex Vinidex Tyco Pipemakers APP (Pipe King)

100 150 225

300

Plain wall PVC Pipe (RRJ)

Material PVC

Brand(s)

Crevet

Iplex

Vinidex

Tyco (D-Flo)

Pipemakers (Metroll Queensland P/L)


Special Conditions Minimum Stiffness Class SN 8 >100mm.

Minimum Stiffness Class SN 10 for 100mm.

Rubber ring jointed pipes are used for sizes greater than 300 mm diameter.


Nominal size (DN) Crevet Iplex Vinidex Tyco Pipemakers

300 375 475

Sandwich Construction PVC Pipe SC (SCJ)

Material PVC

Brand(s)

Vinidex

Iplex

Key Plastics

Australian Plastic Profiles Pty Ltd (Pipe King)

Special Conditions Minimum Stiffness Class SN 8 >100mm.

Minimum Stiffness Class SN 10 for 100mm.


Nominal size (DN) Iplex Key Plastics (Bipex) Vinidex APP (Pipe King)

100

150

225

300

375


PVC SEWER BENDS & ELBOWS

Plain Bends & Elbows SOC-SOC (SCJ)

Material PVC

Brand(s)

Independent Plastics (Ind)

Iplex (Ipl)

Key Plastics (Key)

Vinidex (Vin)

Australian Plastic Profiles Pty Ltd - Pipe King (APP)

Nominal Size

(DN)

100 150 225 300 375

Ben

d A

ng

le

5º

APP

Ipl Ipl Ipl Ipl

Key

Vin

15º

APP

Ind

Ipl Ipl Ipl Ipl

Key

Vin Vin

22.5º

Ipl Ipl

Key

Vin

30º

APP

Ind

Ipl Ipl Ipl Ipl

Key

Vin

42º

45º

APP APP

Ind Ind

Ipl Ipl Ipl Ipl Ipl

Key Key

Vin Vin

60º

APP

Ind

Ipl

Key

Vin

88º

APP APP

Ind Ind

Ipl Ipl Ipl Ipl Ipl

Key Key

Vin Vin

90º Ind Ipl

Vin Vin


Variable Bends (SCJ) (Long Radius Bend) Material PVC

Brand(s) Aymroo (Known as Vario Bend)

Special conditions

May be used to curve or deflect sewer. (Operations and testing equipment can generally pass through this fitting)

Long radius bends shall have a minimum radius of not less than 900mm.

Nom. Size

(DN)

Aymroo

635 mm centre line radius 3000 mm centre line radius

100 150

Plain Bends & Elbows SOC- SPIG (SCJ) Material PVC

Brand(s)


Iplex (Ipl)

Key Plastics (Key)

Vinidex (Vin)


Nom. Size

(DN)

100 150 225 300 375

Ben

d A

ng

le

2º

Ipl

3º

Ipl

4º

Ipl

5º

APP

Ipl Ipl Ipl Key

Vin Vin

15º

APP

Ipl Ipl Ipl

Key Key

Vin


22.5º

30º

APP

Ipl

Key

Vin

42º

Ipl Ipl

Vin Vin

45º

APP

Ind

Ipl

Key Key

60º

APP

Ipl Ipl Ipl

Key

Vin Vin

88º

APP

Ind

Ipl Ipl Ipl

Key Key

90º

Bends & Elbows SOC-SOC (RRJ)

Material PVC

Brand(s)

Iplex

Nom. Size

(DN)

Angle

5° 11º 15° 30° 42° 45° 60° 88° 90°

225 300 375


Bends & Elbows SOC-SPIG (RRJ)

Material PVC

Brand(s)

Iplex (Ipl)

Tyco Alphacan Omniplast (Tyc)

Nom. Size

(DN)

Angle

5° 15° 30° 42° 45° 60° 88° 90°

225 Ipl Ipl Ipl 300 Ipl, Tyc Ipl, Tyc Ipl, Tyc Tyc, Ipl 375 Tyc Tyc Ipl, Tyc Tyc, Ipl

Access Chamber Drop Bend (Moulded)

Material PVC

Brand(s)

Iplex

Nominal size

(DN X dN)

Iplex

100 X100

150 X150

Access Chamber Drop Bend (Fabricated)

Material PVC

Brand(s) Iplex

Nominal size

(DN X dN)

Iplex

225 X 150

300 X 225


PVC SEWER JUNCTIONS

Junctions SOC- SOC- SOC (SCJ) Material PVC

Brand(s)

Aymroo (Aym)


Iplex (Ipl)

Vinidex (Vin)

Angle

Nom. Size

(DN x dN) 45° 60° 88° 90°

100 x 100

Ind Ind

Ipl Ipl

Vin Vin

150 x 100

Ipl Ipl

Vin Vin

150 x 150

Ipl Ipl

Vin Vin

225 x 100

Aym

Ipl

Vin

225 x 150

Aym

Ipl Ipl Ipl

Vin

225 x 225

Aym

Ipl Ipl Ipl

Vin Vin

300 x 100

Aym

Ipl Ipl Ipl

Vin

300 x 150

Aym

Ipl Ipl

Vin


300 x 225

Aym

Ipl Ipl Ipl

Vin Vin

300 x 300

Aym

Ipl Ipl Ipl

Vin Vin

375 x 100

Ipl Ipl

375 x 150

Ipl Ipl

375 x 225

Ipl Ipl

375 x 300

Ipl Ipl

375 x 375

Ipl Ipl

Junctions SOC-SOC-SPIG (SCJ)

Material PVC

Brand(s)

Iplex (Ipl)

Key Plastics (Key)


Nom. Size

(DN x dN)

100 x 100 150 x 100 150 x 150 225 x 100 225 x 150 225 x 225

An

gle

45º APP Ipl Ipl Ipl

Key Key Key 60º

88º APP

Ipl Ipl Ipl

Key Key Key

90º


Junction – 45º (Threaded) (SCJ)

Material PVC

Brand(s) Iplex

Nom. Size

(DN x dN)

Iplex

100 x 100 150 x 100 150 x 150 225 x 100 225 x 100 225 x 150 225 x 225

Curved Square Junction – (SCJ) Material PVC

Brand(s) Iplex

Nom. Size

(DN x DN)

Iplex

100 x 88°

150 x 88°

Sweep Junction with Inspection Opening -– (SCJ)

Material PVC

Brand(s) Vinidex

Iplex

Nominal size

(DN X DN x 100 Inspection Opening)

Vinidex Iplex

100 X100

150 X 150

225 x 225


Junctions SOC-SOC-SPIG (RRJ)

Material PVC

Brand(s)

Iplex

Tyco Alphacan Omniplast

Iplex

Nom. Size

(DN x DN)

Angle

5° 15° 30° 42° 45° 60° 88° 90°

375 x 100 375 x 150 375 x 225 375 x 300 375 x 375


Nom. Size

(DN x DN)

Angle

5° 15° 30° 42° 45° 60° 88° 90°

300 x 100 300 x 150 300 x 225

300 x 300 375 x 100 375 x 150

375 x 225 375 x 300 375 x 375

Junctions SOC-SOC-SOC (RRJ)

Material PVC

Brand(s)

Iplex

Nom. Size

(DN X dn)

Angle

5° 15° 30° 42° 45° 60° 88° 90°

300 X 100 300 X 150 300 X 225


300 x 300 375 X 100 375 X 150 375 x 225 375 x 300 375 x 375


PVC SEWER TEES

Inspection Tees with Two Threaded Caps SOC-SOC-SOC (SCJ)

Material PVC

Brand(s)

Iplex

Key Plastics

Vinidex


Nom. Size

(DN X dN) APP Aymroo Iplex Key Plastics Vinidex

100 x 100 150 x 150 225 x 100 225 x 150 225 x 225 300 x 150 300 x 225 375 x 150

Inspection Tees with Cap SOC-SOC-SOC (RRJ)

Material PVC

Brand(s)

Iplex

Nom. Size

(DN x dN) Iplex

375 x 150

Inspection Tees with 2 Threaded Caps SOC-SPIG-SOC (SCJ) Material PVC

Brand(s) Iplex

Nom. Size

(DN x dN) Iplex

100x100 150x150


TAPERS

Tapers Eccentric SPIG - SOC (SCJ)

Nominal size

(DN x dN) APP Aymroo Iplex Key Plastics Vinidex

150 - 100 225 - 100

225 - 150 300 - 100

300 - 150

300 - 225 375 x 300

Tapers Eccentric SPIG - SOC (RRJ)

Nominal size

(DN x dN)


300 - 100

300 - 150

300 - 225

375 – 150

375 - 225

Material PVC

Brand(s)

Aymroo

Iplex

Key Plastics

Vinidex


Material PVC

Brand(s)



CONNECTORS

Plain Coupling –SOC (SCJ) TO SOC (SCJ)

Material PVC

Brand(s)

Aymroo (DN225-DN375 Only)

Iplex (DN100- DN225 Only)

Key Plastics

Vinidex

Special conditions Where used as MH couplings the surface must be treated to ensure bonding to concrete

Nominal size

(DN)

Iplex Key Plastics Aymroo Vinidex

100

150

225

300

375

MH Coupling SOC - SPIG (RRJ) Material PVC

Installation drawing SEW-1306-V

Brand(s) Special conditions

Iplex

Vinidex

Couplings must be surface treated to ensure bonding to concrete

These fittings are used as manhole couplings for inlets/outlets

Nominal size

(DN)

Iplex Vinidex

100

150

225

300

375


Manhole Coupling – SOC (RRJ) TO SOC (SCJ)

Material PVC

Brand(s) Vinidex

Special conditions Used in conjunction with manhole drop pipes

Couplings must be surface treated to ensure bonding to concrete

Nominal size

(DN)

Vinidex

100

150

225

MH Connector SPIG – SPIG

Material PVC

Brand(s) Iplex

Nominal size (DN)

(mm)

Iplex

100

150

225

300

375

Plain Short PVC SOC (RRJ) - SPIG

Material PVC

Brand(s) Vinidex

Fabfit

Aymroo

Iplex

Special conditions Minimum Class SN8

Nominal size (DN) Vinidex Fabfit Aymroo Iplex

100

150

225

300

375


VC SOC (RRJ) – PVC Plain Wall SOC (RRJ) Adaptors

Nominal size

(DN) Iplex Key Plastics Vinidex Excel

100

150

225

300

375

VC SPIG (RRJ) – PVC Plain Wall SOC (SCJ) Adaptors Material PVC

Brand(s)

Iplex

Key Plastics

Vinidex

Nominal size

(DN) Iplex Key Plastics Vinidex

100

150

225

300

375

PVC Plain Wall – VC Bushes (Adaptors) Material PVC

Brand(s) Vinidex

Nominal size

(DN)

Vinidex

100

150

225

Material PVC

Brand(s)

Iplex

Key Plastics

Vinidex

Excel


SPIG - SOC (SCJ) Threaded Access Coupling

Material PVC

Brand(s)

Iplex

Independent Plastics


Nominal size

(DN) APP Iplex Independent Plastics

100

150

SOC - SOC (SCJ) Threaded Access Coupling

Material PVC

Installation drawing SEW-1351-M

Brand(s) Iplex

Vinidex

Nominal size

(DN)

Iplex Vinidex

100

150

Slip Coupling SOC (RRJ) - SOC (RRJ)

Material PVC

Brand(s)

Key Plastics

Iplex (DN 225-DN 300 Only)

Vinidex


Nominal size

(DN) Independent Plastics Iplex Vinidex

Tyco

100

150

225

300

375


Plain Coupling – SOC (RRJ) - SOC (RRJ)

Material PVC

Brand(s)

Iplex

Vinidex


Nominal size

(DN)

Iplex Vinidex Tyco

100

150

225

300

375

Saddle (SCJ)

Material PVC

Brand(s) Special conditions

Aymroo

Iplex

Vinidex

Not for use on new works. For retro–fitting of new branches on existing pipelines only.

Nominal size

(DN x DN x deg)

Iplex Aymroo Vinidex

150 x 100 x 45

150 x 150 x 45

225 x 100 x 45

225 x 150 x 45

300 x 100 x 45

300 x 150 x 45 300 x 225 x 45

375 x 150 x 45

375 x 225 x 45


END SEALS

SCJ Cap

Material PVC

Brand(s)

Aymroo

Iplex

Vinidex


Nominal size

(DN)

APP Aymroo Iplex Vinidex

100

150

225

300

375

Threaded Cap

Material PVC

Brand(s)

Iplex

Independent Plastics

Vinidex


Nominal size

(DN)

APP Iplex Independent

Plastics

Vinidex

100

150

Socket Plug

Material PVC

Brand(s)

Iplex

Nominal size

(DN)

Iplex

100

150

225


PVC PIPELINE SYSTEM – RIBBED WALL

PVC PIPES - RIBBED WALL

Ribbed Wall PVC Pipe (RW) (RRJ)

Material PVC

Brand(s) Vinidex (Ultra-Rib)

Special Conditions Minimum stiffness class SN8


Not for use within bores.

Under no circumstances may the ribs be removed from the pipe to enable clamps or other fittings to be retrofitted to the pipeline.

Nominal size (DN) Vinidex

150

w225

300

375


PVC SEWER BENDS & ELBOWS – RIBBED WALL

Ribbed Wall PVC Bends & Elbows SOC-SOC (RRJ) Material PVC

Brand(s) Vinidex

Nom. Size

(DN)

Angle

5° 15° 30° 42° 45° 60° 88° 90°

150 225 300 375


PVC SEWER JUNCTIONS – RIBBED WALL

Ribbed Wall PVC Junctions SOC-SOC-SOC (RRJ - SCJ Branch)

Material PVC

Brand(s)

Vinidex

Nom. Size

(DN X dN)

Angle

5° 15° 30° 42° 45° 60° 88° 90°

150 x 100 150 X 150 225 X 100 225 X 150 300 x 100 300 x 150 375 x 100 375 x 150

Ribbed Wall PVC Junctions SOC-SOC-SOC (RRJ Branch)

Material PVC

Brand(s)

Vinidex

Nom. Size

(DN X dN)

Angle

5° 15° 30° 42° 45° 60° 88° 90°

375 x 100 375 x 150 375 X 225 375 X 300 375 X 375


PVC SEWER TEES – RIBBED WALL

Ribbed Wall PVC Inspection Tees with Threaded Cap SOC-SOC-SOC (SCJ Br)

Material PVC

Brand(s)

Vinidex

Nominal Size

(DN)

Vinidex

150 x 150 225 x 225


TAPERS – RIBBED WALL

Ribbed Wall PVC Tapers Eccentric SOC - SOC (RRJ)

Material PVC

Brand(s)

Vinidex

Nominal size

(DN x dN)

Vinidex

150 - 100 225 x 150 300 x 150

300 x 225

375 x 225 375 x 300


CONNECTORS – RIBBED WALL

Ribbed Short PVC SOC (RRJ) - SPIG

Material PVC

Brand(s) Vinidex

Special Conditions Minimum Class 8

Nominal size (DN)

Vinidex

100

150

225

300

375

PVC Ribbed Wall – VC Bushes (Adaptors) Material PVC

Brand(s)

Vinidex

Nominal size

(DN)

Vinidex

150

225

300

375

PVC Ribbed Wall SOC (RRJ) - VC SOC (RRJ) Adaptors

Material PVC

Brand(s)

Vinidex

Nominal size

(DN)

Vinidex

150

225

300

375


PVC Ribbed Wall SOC TO PVC Plain Wall SOC (RRJ) Adaptors

Material PVC

Brand(s)

Vinidex

Nominal size

(DN)

Vinidex

150

225

300

375

Ribbed Wall PVC Slip Coupling SOC (RRJ) - SOC (RRJ)

Material PVC

Brand(s) Vinidex

Nominal size

(DN)

Vinidex

150

225

300

375

Ribbed Wall PVC Plain Coupling SOC (RRJ) - SOC (RRJ)

Material PVC

Brand(s)

Vinidex

Nominal size

(DN)

Iplex

150

225

300

375


END SEALS – RIBBED WALL

RRJ Caps for Ribbed Wall PVC Pipe

Material PVC

Brand(s)

Vinidex

Nominal size

(DN)

Vinidex

150

225

300

375

Ribbed Wall PVC Socket Plug

Material PVC

Brand(s) Vinidex

Nominal size

(DN)

Vinidex

150

225


ELASTOMERIC SEALS

Plain & sandwich wall

Ribbed wall

Material Chloroprene, SBR, EPDM.

Brand(s)

Iplex

Vinidex

Special Conditions

SBR and EPDM not permitted for sewers carrying industrial or commercial waste.

RRJ’s on DN100, 150 and 225 plain & sandwich wall pipes are restricted to joints connecting to access chambers

Nominal size

(DN)

Material Iplex Vinidex

100 Chloroprene or SBR or EPDM



300 Chloroprene or EPDM

375 Chloroprene or EPDM


PVC JOINTING AND SOLVENT WELDING FLUIDS

Jointing Lubricant

Material As supplied

Installation As per manufactures instructions

Brand(s) Iplex

Vinidex

Special Conditions

As recommended by pipeline supplier

Solvent Cement Priming Fluid

Material As Supplied


Brand(s) Iplex

Vinidex

Tyco Water

Special Conditions

As recommended by pipeline supplier

Solvent Cement

Material Solvent Cement


Brand(s) Iplex

Vinidex

Tyco Water

Special Conditions As recommended by pipeline supplier


GLASS REINFORCED PLASTIC (GRP) PIPELINES SYSTEMS

SPECIFICATION -WSA PS-205S Glass Reinforced Plastic (GRP) Pipe for Sewerage

-WSA PS-232 Glass Reinforced Plastic (GRP) Non-Pressure Pipe

-WSA PS-237 Glass Reinforced Plastic (GRP) Non-Pressure Fittings

-AS 3571 Glass filament reinforced thermosetting plastics pipes- polyester based - Water supply, sewerage and drainage applications.

GRP Pipe SPIG-SPIG (RRJ)

Material Glass Reinforced Plastic (GRP)

Brand(s) Fibrelogic Flowtite (GRP) Pipe Systems

Special Conditions Suitable for industrial and commercial areas

Use of larger sizes subject to project-specific approval.

Minimum stiffness class SN 10

Pipes supplied with double socketed couplings

Specialised jacking pipes also approved for use

Repairs shall be carried out using Straub or Teekay Couplings

Nominal size (DN)

(mm)

Fibrelogic Flowtite

300 375 450 525 600 675 750 900 1000 1200

CC GRP Pipe

Material Centrifugally Cast Glass Reinforced Plastic (GRP)

Brand(s) HOBAS SewerLine (CC GRP) pipe systems


Special Conditions Minimum stiffness class SN 10

Pipes supplied with coupling

Specialised jacking pipes also approved for use

Repairs shall be carried out using Straub or Teekay Couplings

Nominal size (DN)

(mm)

HOBAS SewerLine

300

350

400

500

600

700

800

900

1000

1100

1200

1300

1400

1500

1600

1700

1800

2000

2200

2400

Collars (RRJ)


Brand(s)

Iplex Flowtite (GRP) Pipe Systems

Hobas SewerLine (GRP)

Nominal size (DN)

(mm)

Iplex Flowtite Hobas SewerLine

300 350 375

400 450 500 525

600 675

700


750 800 900 1000 1200

Access Chamber Connector (RRJ)


Brand(s) Iplex Flowtite (GRP) Pipe Systems


Special Conditions

Epoxy and sand coated

Nominal size (DN)

(mm)

Iplex Flowtite

Hobas SewerLine

300

375

400 450 500 525

600 700 800 900 1000 1200

Saddle Tee Junction




Special Conditions

SEW approval required Only for use on existing GRP sewers

Nominal size (DN)

(mm)

Iplex Flowtite Hobas SewerLine Nominal size (DN)

(mm)

Iplex Flowtite Hobas SewerLine

300 X 100 450 X 375

300 X 150 450 X 450

300 X 225 525 X 100

300 X 300 525 x 150

350 X 100 525 x 225

350 X 150 525 x 300


375 X 100 525 x 375

375 X 150 525 x 450

375 x 225 525 x 525

375 X 300 600 X 100

375 X 375 600 x 150

400 X 100 600 x 225

400 X 150 600 x 300

450 X 100 600 x 375

450 X 150 600 x 450

450 x 225 600 x 525

450 x 300 600 x 600

Saddle Slope Junction – 30o and 45o


Brand(s) Iplex Flowtite (GRP) Pipe Systems (Ipl)

Hobas SewerLine (Hob)

Special Conditions

SEW approval required Only for use on existing GRP sewers

Nominal size (DN)

(mm)

30º

45º Nominal size (DN)

(mm)

30º

45º

300 X 100 Ipl Ipl, Hob 525 X 100 Ipl Ipl

300 X 150 Ipl Ipl, Hob 525 x 150 Ipl Ipl

300 X 225 Ipl Ipl 525 x 225 Ipl Ipl

300 X 300 525 x 300

350 X 100 Hob

350 X 150 Hob

375 X 100 Ipl Ipl 525 x 375

375 X 150 Ipl Ipl 525 x 450

375 x 225 Ipl Ipl 525 x 525

375 X 300 600 X 100 Ipl Ipl

375 X 375 600 x 150 Ipl Ipl

400 X 100 Hob

400 X 150 Hob

450 X 100 Ipl Ipl 600 x 225 Ipl Ipl

450 X 150 Ipl Ipl 600 x 300

450 x 225 Ipl Ipl 600 x 375

450 x 300 600 x 450

450 X 375 600 x 525

450 X 450 600 x 600


Tees Spig-Spig-Spig (RRJ)




Nominal size (DN) X Nominal Branch

(mm)

Iplex Flowtite

Hobas SewerLine

300 x 100

300 x 150

300 x 300 375 x 100

375 x 150

375 x 300 375 x 375 450 x 450 525 x 100

525 x 150

525 x 300

525 x 375

525 x 450 525 x 525 600 x 300

600 x 450 600 x 525 600 x 600

Bends SPIG-SPIG (RRJ) Material Glass Reinforced Plastic (GRP)



Iplex SewerMAX (GRP/VC)

Iplex Flowtite

Nom. Size

(DN)

Angle

11.25º 22.5° 30° 45° 60° 90°

300 375 450 525 600

Hobas SewerLine

Nom. Size

(DN)

Angle

0-30º 31-60° 61-90°

300 350


400 450 600 700

Iplex SewerMAX

Nom. Size (DN (GRP) x dN (VC))

45°

225 x 150 300 x 150

Adaptors GRP/VC Soc-Soc or Soc-Spig Material Glass Reinforced Plastic (GRP)

Brand(s) Iplex SewerMAX (GRP/VC)

Nom. Size DN x dn Iplex SewerMAX

225 x 225 300 x 300

Adaptors GRP/PVC (SCJ) Material Glass Reinforced Plastic (GRP)



225 x 225

Adaptors GRP/PVC (RRJ) Material Glass Reinforced Plastic (GRP)



225 x 225

Other Fittings (RRJ) Flowtite GRP pipes are compatible with PVC-u, PVC-M, PVC-O and ductile iron pipes and fittings of the same nominal diameter and also stainless steel clamps and junctions.


POLYPROPYLENE PROFILE WALL SYSTEM

SPECIFICATION -WSA PS-240 Polypropylene (Ribbed Construction) Non-

Pressure Pipe and Fittings

PIPES

Polypropylene (PP) Profile Wall Pipe SOC-SPIG (RRJ)

Material Polypropylene PP

Brand(s) Special Conditions

Iplex (SewerMAX)

Vinidex (SewerPRO)

SewerPRO has been removed from the Approved Products List until further notice

Minimum pipe stiffness SN10

Suitable for use in and downstream of industrial and commercial areas

SewerMAX has a yellow liner

SewerPRO has a white liner

Nominal size (DN)

(Nominal Length 3m)

Iplex Vinidex

150 225 300 375 450 525 600 750 900

FITTINGS - Polypropylene

Tees (Square Junctions) PP 90° SOC-SOC-SOC (RRJ) Material Polypropylene

Brand(s) Iplex

Vinidex

Special Conditions Minimum pipe stiffness SN10

Nom. Size (DN x dN)

Iplex Vinidex

150 x 150 225 x 150


225 x 225 300 x 150 300 x 225 300 x 300 375 x 150 375 x 225 375 x 300 375 x 375 450 x 150 450 x 225 450 x 300 450 x 375 450 x 450

Threaded Inspection Tees & Caps PP 90° SOC-SOC-SOC (RRJ - Thread) Material Polypropylene

Brand(s) Iplex

Vinidex


Nom. Size (DN x dN)

Iplex Vinidex

150 x 150 225 x 150 225 x 225 300 x 150 300 x 225 300 x 300 375 x 150 375 x 225 375 x 300 375 x 375 450 x 150


JUNCTIONS PP

Slope Junction PP- 45o, SOC-SOC-SOC (RRJ) Material Polypropylene

Brand(s) Iplex

Vinidex


Junctions with PVC branches are not for use within or downstream of industrial or commercial areas

Nominal size (DN)

Iplex Vinidex

150 x 100 (PVC Br)

150 x 150 (PVC Br & PP Br)

225 X 100 (PVC Br)

225 X 150 (PVC Br & PP Br)

225 X 225

300 X 100 (PVC Br)

300 X 150 (PVC Br & PP Br)

300 X 225

300 X 300

375 X 100 (PVC Br)

375 X 150 (PVC Br & PP Br)

375 x 225

375 X 300

375 X 375

450 X 100 (PVC Br)

450 X 150 (PVC Br & PP Br)

450 X 375

450 X 450

Slope Junction PP- 88o, SOC-SOC-SOC (RRJ) Material Polypropylene

Brand(s) Iplex

Vinidex


Junctions with PVC branches are not for use within or downstream of industrial or commercial areas


Nominal size (DN)

Iplex Vinidex

150 x 100 (PVC Br)

150 x 150 (PVC Br & PP Br)

225 X 100 (PVC Br)

225 X 150 (PVC Br & PP Br)

225 X 225

300 X 100 (PVC Br)

300 X 150 (PVC Br & PP Br)

300 X 225

300 X 300

375 X 100 (PVC Br)

375 X 150 (PVC Br & PP Br)

375 x 225

375 X 300

375 X 375 450 X 100 (PVC Br)

450 X 150 (PVC Br & PP Br)

450 x 225

450 X 375

450 X 450


BENDS PP

Bends - PP Mitred (2 or 3 cut) SOC-SPIG (RRJ) – (Not Approved) Material Polypropylene

Brand(s) Iplex


Nom. Size

(DN)

Angle

15° 30° 45º 90°

225 300 375 450 525 600

Bends - PP SOC-SOC (RRJ) Material Polypropylene

Brand(s) Vinidex


Nom. Size

(DN)

Angle

15° 30° 45º 90°

150 225 300 375 450 525 600


COUPLINGS PP

Couplings PP- 88o SOC-SOC (RRJ) Material Polypropylene

Brand(s) Vinidex



150

225

300

375

450

525

600

750

900

Adaptor Couplings PP- VC SOC-SOC (RRJ) Material Polypropylene

Brand(s) Vinidex



150

225

00

375

Adaptor Couplings PP- PVC SOC-SOC (RRJ-SCJ) Material Polypropylene

Brand(s) Vinidex


Not for use in industrial or commercial areas


150

225

00

375


Adaptor Couplings PP- PVC SOC-SOC (RRJ-RRJ) Material Polypropylene

Brand(s) Vinidex


Nominal size (DN)

Vinidex

150

225

300

375

Repair Clamp Material Stainless Steel

Brand(s) Iplex/Crevet

Special Conditions For SewerMAX™ repair works only

Nominal size (DN)

Iplex/Crevet

225

300

375

450

525

600

Joiner Clamp Material Stainless Steel


Special Conditions For SewerMAX™ repair works only

Nominal size (DN)

Reducing Junction

size (DN)

Clamp length

No. Bolts

Iplex/Crevet

225 100 300 8 bolts

300 100 300 8 bolts

375 100 300 8 bolts

450 100 400 10 bolts

525 100 400 10 bolts

600 100 400 10 bolts


Reducing Junction 45° Material Stainless Steel


Special Conditions For SewerMAX™

Nominal size (DN)

Reducing Junction

size (DN)

Clamp length

No. Bolts

Iplex/Crevet

225 150 400 8 bolts

300 150 400 8 bolts

375 150 400 8 bolts

450 150 600 16 bolts

525 150 600 16 bolts

600 150 600 16 bolts


FITTINGS - PVC-U COMPOSITE

TEES PVC-U COMPOSITE

Tees PVC-U Composite- 90o SOC–SOC–SOC (RRJ) Material PVC

Brand(s) Iplex



Nom. Size

(DN X dN)

Iplex

225 x 100 225 x 150 225 x 225 300 x 100 300 x 150 300 x 225 300 x 300 375 x 100 375 x 150 375 x 225 375 x 375


BENDS PVC-U COMPOSITE

Bends PVC-U Composite Mitred (2 or 3 cut) SOC-SPIG (RRJ) Material PVC

Brand(s) Iplex



Nom. Size

(DN)

Iplex

15° 30° 45º 90°

225 300 375

Bends PVC-U Composite Mitred (2 or 3 cut) SOC-SOC (RRJ) Material PVC

Brand(s) Iplex



Nom. Size

(DN X dN)

Iplex

15° 30° 45º 90°

225 300 375


COUPLINGS PVC-U COMPOSITE

Plain Coupling PVC-U Composite SOC-SOC (RRJ) Material PVC-U

Brand(s) Iplex



Nominal size (DN)

(mm)

Iplex

225

300

375

Adaptor PVC-U Composite SOC (RRJ) – PVC SOC (RRJ) Material PVC-U

Brand(s) Iplex

Vinidex



Nominal size (DN)

(mm)

Iplex Vinidex

150

225

300

375

Adaptor PVC-U Composite (RRJ) – PVC SOC (SCJ) Material PVC-U

Brand(s) Iplex



Nominal size (DN)

(mm)

Iplex

225

300

375


Eccentric Taper PVC-U Composite SOC-SOC (RRJ) Material PVC-U

Brand(s) Iplex



Nominal size (DN)

(mm)

Iplex

300 x 150

300 x 225

375 x 300

Concentric Taper PVC-U Composite SOC-SOC (RRJ) – Not Approved


END SEALS

End Caps PVC-U Composite SOC (RRJ) Material PVC-U

Brand(s) Iplex


Nominal size (DN)

(mm)

Iplex

300 x 150

300 x 225

375 x 300


FITTINGS - GRP (GLASS REINFORCED PLASTIC)

BENDS GRP

Bends GRP Mitred (1, 2 or 3 cut) SOC-SOC (RRJ) Material PVC

Brand(s) Iplex


Nom. Size

(DN)

Iplex

11.25º 15° 22.5º 30° 45º 60º 75º 90°

225 300 375 450 525 600

TEES GRP

Tees GRP 90o SOC–SOC–SOC (RRJ) Material GRP

Brand(s) Iplex


Nom. Size

(DN X dN)

Iplex Nom. Size

(DN X dN)

Iplex

225 x 100 450 x 450 225 x 150 525 x 100 225 x 225 525 x 150 300 x 100 525 x 225 300 x 150 525 x 300 300 x 225 525 x 375 300 x 300 525 x 450 375 x 100 525 x 525 375 x 150 600 x 100 375 x 225 600 x 150 375 x 300 600 x 225 375 x 375 600 x 300 450 x 100 600 x 375 450 x 150 600 x 450 450 x 225 600 x 525 450 x 300 600 x 600 450 x 375


JUNCTIONS GRP

Junctions GRP 45o SOC-SOC-SOC (RRJ) Material GRP

Brand(s) Iplex


Nominal size (DN)

Iplex

225 X 100

225 X 150

225 X 225

300 X 100

300 X 150

300 X 225

300 X 300

375 X 100

375 X 150

375 x 225

375 X 300

375 X 375

450 X 100

450 X 150

450 x 225

450 x 300

450 X 375

450 X 450

525 X 450

525 x 525

600 X 525

600 x 600


POLYETHYLENE PLAIN WALL SYSTEMS

SPECIFICATION -WSA PS-207 Polyethylene (PE) Pipe for Water Supply and

Sewerage -WSA PS-208 Polyethylene (PE) Fittings for Water Supply and Sewerage - Moulded

-WSA PS-242 Polyethylene (Plain Wall) Non-Pressure Pipe and Fittings

POLYETHYLENE PIPES

Polyethylene (PE) Pipe Butt/Butt – solid wall

Material PE

Brand(s) Iplex

Vinidex

PPI Corporation (PE100)

Special Conditions Minimum SDR 17 – A robust minimum pipe class has been specified as solid wall PE is used mainly for directional drilling and pipe-bursting

Jointing by butt welding & electrofusion.

Solid black pipes and fittings only

Suitable for industrial and commercial areas

Nominal size (DN)

(mm)

Iplex

Vinidex

PPI Corporation

110

160

250

355

450

560


POLYETHYLENE FITTINGS – BUTT WELDED

Butt Welded Fittings

Material P.E. (PE 80, PE 100)

Brand(s)

Iplex (Ipl)

Philmac (Phi)

Plasson (Pla)

Vinidex (Vin)

Special Conditions Fittings and flanges shall not be extrusion jointed

Minimum SDR 17

Bends Nom. Size

(DN)

45º 88.5º 90°

Short Elongated Sweep Short Short Elongated Sweep

110

Ipl Ipl Ipl Ipl

Phi Phi Phi

Vin Vin Vin Vin Vin

160

Ipl Ipl Ipl Ipl

Phi Phi Phi

Vin Vin Vin Vin Vin

250

Ipl Ipl Ipl Ipl

Phi Phi Phi

Vin Vin Vin Vin Vin

355

Ipl Ipl Ipl Ipl

Vin Vin Vin Vin

450 Ipl Ipl Ipl Ipl

560 Ipl Ipl Ipl Ipl

Tees Nominal size (DN)

(mm)

Short Elongated

110 x 110

Ipl Phi

Vin Vin

160 x 110

Ipl Phi

Vin

160 x 160 Ipl

Phi


Vin Vin

250 x 110

Ipl

Vin

250 x 160

Ipl

Phi

Vin

250 x 250

Ipl

Vin Vin

Oblique Junctions Nominal size (DN)

(mm)

110 x 110 x 45º Phi

160 x 110 x 45º Phi

160 x 160 x 45º Phi

250 x 110 x 45º Phi

250 x 160 x 45º Phi

250 x 250 x 45º Phi

Reducers – Eccentric Nominal size (DN)

(mm)

Elongated Short

160 x 110

Ipl

Phi

Vin Vin

250 x 160

Ipl

Vin

Plain Stub Flanges Nominal size (DN)

(mm)

110

Ipl

Phi

Vin

160

Ipl

Phi

Vin


250

Ipl

Phi

Vin

355

Ipl

Vin

450

Ipl

Vin

560

Ipl

630

Ipl

710

Ipl

800

Ipl

900

Ipl

1000

Ipl

Metal Backing Rings for PE Stub Flanges – (galvanised steel) Nominal size (DN)

(mm)

110

Ipl

Vin

160

Ipl

Vin


250

Ipl

Vin

355

Ipl

Vin

450

Ipl

Vin

560

Ipl

Vin

Plain End Caps Nominal size (DN)

(mm)

110

Ipl

Vin

160

Ipl

Vin

250

Ipl

Vin

Maintenance Hole Couplings Maintenance Hole couplings are not currently an off the shelf item. They will generally be required to be specially fabricated as per

MRWA Standard Drawing No. SEW-1313-V. The PE coupling with the flange and hydrophilic rubber is generally recommended over

the PVC arrangement as creep could cause the PE pipeline to pull out of the PVC coupling and fail.


POLYETHYLENE FITTINGS – Electrofusion WELDED

Electrofusion Fittings

Material Polyethylene (PE80)

Brand(s)

Philmac

Iplex

Vinidex

Plasson

Special Conditions

Fittings compatible with PE80 & PE100

Fittings and flanges shall not be extrusion jointed

Couplings PE100 Nominal size (DN)

(mm)

110

Ipl

Phi

Pla

Vin

160

Ipl

Phi

Pla

Vin

250

Ipl

Phi

Pla

355

Ipl

Pla

400 Ipl

450 Ipl

500 Ipl


560 Ipl

630 Ipl

Bends Nom. Size

(DN)

22.5º 45º 90º

110

Ipl Ipl

Pla Pla Pla

Vin Vin

160

Ipl Ipl

Pla Pla Pla

Vin Vin

250

Ipl Ipl

Pla

Tees Nom. Size

(DN)

Short Elongated

110 x 110

Ipl

Pla

Vin Vin

160 x 110

Ipl

Pla

Vin

160 x 160

Ipl

Vin Vin

250 x 110

Ipl

Vin

250 x 160

Ipl

Vin


250 x 250

Ipl

Vin Vin

Plain Stub Flanges Nominal size (DN)

(mm)

110 Vin

160 Vin

250 Vin

End Plugs Nom. Size

(DN)

110

Ipl

Pla

Vin

160

Ipl

Pla

Vin

250

Ipl

Pla

Vin

Repair Saddle – (for operational use only) Nominal size (DN)

(mm)

110 Pla

160 Pla

PE Property Branch Assemblies

Material Polyethylene

Brand(s)

Iplex (Poliplex pipes, Proplex fittings)

Special Conditions

Minimum stiffness SN10


Property Connection Type 1 (Excluding Pipe) RRJ System



Nominal Size (DN) Supplier Description


160 Iplex Type A RRJ Assembly

160 Iplex Type 2A RRJ Assembly

160 Iplex Type B RRJ Assembly

160

Iplex Type B1 Spigot x Socket RRJ Assembly

160 Iplex Type C RRJ Assembly

160 Iplex Type D Spigot x Socket RRJ Assembly

160 Iplex Type E RRJ Assembly

PE fittings for profiled walled Polypropylene sewerage pipelines

Material Polyethylene

Brand(s)

Iplex (SewerMAX)

Special Conditions

Minimum stiffness SN10

Nominal Size (DN) Branch Size (DN)

Description

225 160 DN 225x160x45° PE Junction for SewerMAX

Use of Butt Welded Fittings with Electrofusion joints Please note many butt welded fittings are also suitable for electrofusion jointing. Installers are advised to refer to

suppliers for advice on which butt-welded fittings may also be electrofusion jointed.


VITRIFIED CLAY SYSTEM

SPECIFICATION -WSA PS-231 Vitrified Clay (VC) Pipe and Fittings

Vitrified Clay Socketless system

Pipes

Vitrified clay pipe (socketless) (RRJ)

Material Vitrified clay

Brand(s) Hepworth “SuperSleve”

Suppliers LEAP P/L

Special Conditions Joined with double socketed RRJ Polypropylene couplings

Suitable for use in or downstream of industrial or commercial areas

Nominal size (DN) Hepworth

100

150

225

300 Note:

1. Compliance with European Standard EN 295 is accepted as equivalent to AS 1741 provided product complies with permeability and joint elastomer compression requirements of AS 1741.

2. For available lengths refer to manufacturer.

Fittings (RRJ)

Bend


Brand(s) Hepworth

Suppliers LEAP P/L

Nom. Size

(DN)

Angle

15° 30° 45º 90°

100

150

225

300


Jointing coupling SOC-SOC (RRJ)

Material

Polypropylene with elastomeric seals

Brand(s) Hepworth

Suppliers LEAP P/L

Special Conditions A jointing lubricant is supplied for use with this product

Nominal size

(DN) Hepworth

100

150

225

300 Note:

1. Used to joint spigoted VC pipes.

2. Hepworth “SuperSleve” couplings suit Hepworth pipes.

Jointing Ring

Material Refer to table

Brand(s) Hepworth

Suppliers LEAP P/L

Special Conditions SBR (Styrene butadiene rubber) not to be used in industrial/commercial areas

The following jointing rings are available in all sizes:

SBR (Styrene butadiene rubber) The standard ring supplied. Not to be used in industrial/commercial areas

EPDM (ethylene propylene diene monomer)

NBR (Nitrile rubber)

Slip coupling SOC-SOC (RRJ) Material

Polypropylene with

elastomeric seals

Brand(s) Hepworth

Suppliers LEAP P/L


Special Conditions For operations use only

Nominal size

(DN) Hepworth

100

150

VC-PVC Adaptors SOC-SOC (RRJ)

Material

Polypropylene with elastomeric seals

Brand(s) Hepworth

Suppliers LEAP P/L

Nominal size

(DN) Hepworth

100

150

Curved Square Junction 90º SPIG-SPIG-SPIG (RRJ)

Material

Vitrified clay

Brand(s) Hepworth

Suppliers LEAP P/L

Nom. Size

(DN X dN)

Hepworth

45º

100 x 100 150 x 100 150 X 150 225 X 100 225 X 150 225 x 225 300 x 100 300 x 150 300 x 225 300 x 300

Junctions SPIG-SPIG-SPIG (RRJ) Material

Vitrified clay

Brand(s) Hepworth


Suppliers LEAP P/L

Nom. Size

(DN X dN)

Hepworth

45º 90º

100 x 100

150 x 100 150 X 150 225 X 100

225 X 150 225 x 225 300 x 100

300 x 150 300 x 225 300 x 300

Junctions Square

Material

Vitrified clay

Brand(s) Hepworth

Suppliers LEAP P/L

Nom. Size

(DN X dN)

Hepworth

90º

100 x 100 150 x 100 150 X 150 225 X 100 225 X 150 225 x 225 300 x 100 300 x 150 300 x 225 300 x 300

Plug Material Polypropylene

Brand(s) Hepworth

Suppliers LEAP P/L

Nominal size

(DN) Hepworth

100


150

Concentric Taper Pipe


Brand(s) Hepworth

Suppliers LEAP P/L

Special Conditions Not approved for use

Nominal size

(mm x mm)

Hepworth

100 x 150

150 x 225

225 x 300


Vitrified Clay Socketed system

Vitrified Clay Pipe SOC-SPIG (RRJ)


Brand(s) Keramo Steinzeug

Suppliers Humes

Special Conditions Only pipes with socket controlled jointing system “C” are approved


SBR (Styrene butadiene rubber) jointing rings not to be used in industrial/commercial areas

Nominal size (DN) Keramo

100

125

150

200

225

250

300

350

400

450

500

600

700

800

900

1000

1200

1400 Note:

Compliance with European Standard EN 295 is accepted as equivalent to AS 1741 provided product complies with permeability and joint elastomer compression requirements of AS 1741.

For available lengths refer to manufacturer.

Rocker Pipes SOC-SPIG (RRJ)



Suppliers Humes

Special Conditions Only fittings with socket controlled jointing system “C” are approved



100

125

150

200

225

250

300

350

400

450

500

600

700

800

900

1000

1200

1400

Concentric Taper Pipe – (Not Approved for Use)



Suppliers Humes

Special Conditions Taper not eccentric. Not

approved for use

BENDS PP

Bends SOC-SPIG (RRJ) Material Polypropylene


Supplier Humes


Only fittings with socket controlled jointing system “C” are approved

Nom. Size

(DN)

Angle

15° 30° 45º 60º 90°

100


125

150

200

225

250

300

350

400

450

Junctions SPIG-SPIG-SPIG (RRJ)

Material Brand(s) Suppliers Special Conditions

Vitrified clay

Keramo Steinzeug

Humes

Only fittings with socket controlled jointing system “C” are approved

Nom. Size

(DN X dN)

Hepworth

45º

100 x 100 150 x 100 150 X 150 225 X 100 225 X 150 225 x 225 300 x 100 300 x 150 300 x 225 300 x 300


Vitrified Clay PIPE JACKING system

Vitrified Clay Jacking Pipe SPIG-SPIG (RRJ)


Vitrified clay

Keramo Steinzeug

Humes

Only pipes with socket controlled jointing system “C” are approved



Refer manufacturers specifications for max. jacking forces

Nominal size (DN) Jointing System Keramo

150 Double socketed GRP (RRJ)

200

225

250

300 Double socketed SS (RRJ)

350


450





900


1200

1400

Vitrified Clay Jacking Rocker Pipe SPIG-SPIG (RRJ)


Vitrified clay

Keramo Steinzeug

Humes




Refer manufacturers specifications for max.


jacking forces






Vitrified Clay Jacking Pipe to Vitrified Clay Conventional Pipe Adaptors SPIG-SPIG (RRJ)


Vitrified clay

Keramo Steinzeug

Humes



Refer manufacturers specifications for max. jacking forces






Vitrified Clay Jacking Pipe Polypropylene Couplings (RRJ)


Vitrified clay

Keramo Steinzeug

Humes




150

Vitrified Clay Jacking Pipe SS Couplings (RRJ)


Vitrified clay

Keramo Steinzeug

Humes





300

400

500

600

700

800

1000

Vitrified Clay Jacking Pipe SS Band Seal/Repair Couplings (RRJ)


Vitrified clay

Keramo Steinzeug

(M-seals)

Humes




100

125

150

200

250

300

350

400

450

500

600

700

800


DUCTILE IRON PIPELINE SYSTEM – (NOT GENERALLY APPROVED FOR USE)

SPECIFICATION - WSA PS-234 Ductile Iron Pipe for Gravity Sewers

- WSA PS 239 Ductile Iron Fittings for Gravity Sewers

Ductile Iron Pipe

Ductile iron cement lined (DICL)

Material Ductile iron

Installation drawing SEW- 1406

SEW- 1404

Brand(s) Tyco Water

Special Conditions Subject to separate approval by SEW

Pipe & fittings must be sleeved with polyethylene

Pipe Class to be equivalent to K9

Nominal size (DN)

(mm)

Tyco Water

100-600

Ductile iron internally lined with polyurethane

Material Ductile iron

Brand(s) Tyco Water

Special Conditions Ecopur – lined internally & externally with polyurethane.

Ducpur – lined internally with polyurethane and externally with zinc/bitumen

Pipe Class to be equivalent to K9

Contractors to have training in the care and handling of polyurethane coatings

Repair kits shall be used to recoat cut ends of pipe

Nominal size (DN)

(mm)

Tyco

Ducpur & Ecopur

80 - 700

Ductile iron fittings For details of range refer to the Water Reticulation Products catalogue. Cement lined fittings are permitted. Specific approval from the Water Company is required.


STEEL PIPELINE SYSTEMS – (NOT GENERALLY APPROVED FOR USE)

SPECIFICATION - WSA PS – 203 Steel Pipe for Water Supply and Sewerage - WSA PS – 204 Steel Fittings for Water Supply and Sewerage

Pipes

Pipe - Cement lined and externally coated

Material Steel, fusion bonded polyethylene coated, cement lined (Sintakoat)

Brand(s) Tyco Water

Special Conditions Subject to separate approval by SEW

May be considered for a pipe sleeve, subject to appropriate cathodic protection, etc

Nominal size (DN)

Pipe Length

(m)

Tyco Water

114 - 2159 6,9,12 & 13.5

Fusion Bonded Polyethylene Coated and Lined

Material Steel, fusion bonded polyethylene coated & lined (Sintapipe)

Brand(s) Tyco Water

Special Conditions May be considered for a pipe sleeve, subject to appropriate cathodic protection, etc

Nominal size (DN)

Pipe Length

(m)

Tyco Water

300 - 800 6

Steel Fittings

Cement lined and Externally Coated

Material Steel, Fusion bonded Polyethylene

Coated (Sintakote*)

Brand(s)

Tyco Water

Kealba Engineering

Apollo Engineering

Special Conditions Manufactured in accordance with SEW’s current welding specification.


Note: Not all manufactures/product suppliers listed above manufacture all fitting sizes.

Fittings

Offtakes (standard)

Flanges (standard)

Flanges (blank)

Jointing Bands

Sleeve bands

Blank Ends

Compensation Plates


ABS PIPELINE SYSTEMS – (NOT APPROVED FOR USE)

SPECIFICATION - WSA PS-238 ABS Non-Pressure Pipe & Fittings - WSA PS-212 DI Fittings for Plastic Pipe for Pressure

Sewerage

ABS Pipe (SCJ)

Material ABS

Brand(s) Glynwed Pipe Systems

Tyco Water

Special Conditions Series 1

Fittings currently PN 6 and PN 9

Nominal size (DN)

(mm)

100 – 300

300 – 750

ABS Fittings (SCJ)

Material ABS

Brand(s) Glynwed Pipe Systems

Tyco Water

Special Conditions Series 1.

Fittings currently PN 6 and PN 9

Nominal size (DN) Fitting

100 - 750 Couplings Soc/Soc 375 - 750 90 deg bends Spig/Spig (short & long radius) 375 -750 45 deg bends Spig/Spig (short & long radius) 100 - 750 Rubber Ring Socket (short & long)


MAINTENANCE STRUCTURES

ACCESS CHAMBER SYSTEMS

Precast Concrete Maintenance Hole Systems Specification -WSA PS-323 Maintenance Holes – Precast Concrete

Material Concrete (reinforced or unreinforced)

Brand(s) Humes (Not currently approved)

Rocla

Special requirements Where MH bases are supplied the table may be precast

Note: 1 Actual product sizes and masses may vary. Consult manufacturers.

2. Components may include factory installed plastic encapsulated steel step irons or stainless steel step irons. Galvanised steel step irons are not permitted.

3. Components without step irons are permitted. Galvanised steel ladders must be installed on site.

Mastic Jointed System

Component Rocla

Effective height (mm)

Nom Diameter (mm)

Tapered make–up ring 50 – 100 600

Make–up rings 75,100 600

Straight–back 600 1070 (600–1015)

tapers 600 1070 (600–1180)

Shaft sections 300 - 2400 1070 (1015)

300 -1200 1220 (1180)

Base 600 1070 (1015)

Squat cone 300 1070 (600–1015)

Jointing Mastic

Note : Diameters in brackets are actual sizes for pre-cast access chambers.


Rubber Ring Jointed System – (Not currently approved)

Component Humes – (Not currently approved)

Effective height (mm)

Nom Diameter (mm)

Make–up rings 100 600

75 600

Tapered make–up rings 100–75 600

Straight–back tapers 600,800 1070 (600–1100)

Shaft sections 350,500,700,1050 1070 (1100)

Bases 500,650,850,1200 1070 (1100)

Squat Cone 300 1070 (600–1100)

Wedge Rubber Ring – 1070 (1100)

Note : Diameters in brackets are actual sizes for pre-cast access chambers.


Maintenance Shafts

Specification -WSA PS-321 Maintenance Shafts – PVC-U -WSA PS-322 Maintenance Shafts - PE

PVC Maintenance shaft

Material PVC

Brand(s) Aymroo

Special Conditions

Approval applies to in-line and terminal MS’s only

To be used on <=225mm diameter sewers

Inline MS and Terminal MS only to be used

Max’ 4.7m deep to the obvert of the tee

Lateral connections not permitted


Bayonet, screwed “REDI” cap to be used to seal shaft. (Note, the use of this cap is currently under revision)

MS must incorporate a SEW approved cover

For non-trafficable areas only

Polypropylene Maintenance Shaft Base

Material Telescopic polypropylene MS

Brand(s)

Sewer Maintenance Shaft P/L (BT Bautechnik Impex GmBH & Co. KG.)

HepworthTPPIC

Hepworth TPPIC has been removed until further notice

Special Conditions Approval applies to in-line and terminal MS’s only

To be used on ≤225mm diameter sewers

All connections to be RRJ


Max’ 6m deep to the obvert of the tee


Bayonet, screwed “REDI” cap to be used to seal shaft. (Note, the use of this cap is currently under revision) MS must incorporate a SEW approved cover



Polyethylene Maintenance Shaft Base Material Polyethylene

Brand(s) Wormall “Poo-Pit”







Bayonet, screwed “REDI” cap to be used to seal shaft. (Note, the use of this cap is currently under revision)

MS must incorporate a SEW approved cover


Precast Concrete Maintenance Shaft Material Precast concrete

Brand(s) Humes “Quicktee”






Suitable for trafficable areas


MS must incorporate a grating max’ opening 300mm under the cover & a SEW approved cover

Polypropylene Maintenance Shaft Material Co-Polymer Polypropylene (PP-R)

Brand(s) Iplex EZIpit™


Special Conditions Max depth of assembled product must not exceed 5m Min depth of 1.2m Not suitable for trafficable areas. Polypropylene pipe spigots shall not be fabricated or installed within the shaft or Tegra base units of the final assembled product The ductile iron lid and cap must have a modified securing mechanism that doesn’t require 316 Stainless Steel bolts The Tegra base unit is strictly limited to the straight through (180°) channel and empty base only. The bend and tee channel are prohibited within South East Water’s licensed district. Use of this product must also comply with requirements in Clause 6 of MRWA edition of WSA02 2002.

Approved Iplex EZipit™ product components Tegra™ Base: Straight through (180°) channel with RRJ adjustable connections suitable for PVC DWV pipe Product Code Description

TGB600150 DN600 x 150 base x 180º Channel



Tegra™ Base: Empty Base Product Code Description

TGB600 Empty Base

EZIpit™ Shaft Product Code Description

TGPP600A DN600 x 1000mm EZIpit™Shaft

TGPP600AV DN600 x 1500mm EZIpit™Shaft

TGPP600B DN600 x 2000mm EZIpit™Shaft

TGPP600C DN600 x 3000mm EZIpit™Shaft

TGPP600DV DN600 x 4500mm EZIpit™Shaft

EZIpit™ Cap and Lid Arrangement Product Code Description

GME300S6C DN600 EZIpit™ Cap and Lid


EZIpit™ Shroud Product Code Description

POH04800T DN800 X 300mm EZIpit™ Shroud (non trafficable conditions)

EZIpit™ Frame and Access Cover Arrangement (Class B) Product Code Description

GME300S6B2 DN600 EZIpit™ Frame and Cover – Class B

Rubber Ring Seal for Adjustable Socket (Spare parts only) Product Code Description

TGRS150 DN150 Adjustable pipe connector rubber ring seal



Gatic Sealing Compound Product Code Description

GM37504 Gatic Sealing compound x 4 Kg

GME37520 Gatic Sealing Compound x 20 Kg

Iplex PVC Pipe Lubricant Product Code

Description

JL010500 Iplex PVC Pipe Lubricant 0.5 Kg

JL011000 Iplex PVC Pipe Lubricant 1 Kg

JL014000 Iplex PVC Pipe Lubricant 4 Kg

EZIpit™ Rubber Ring Product Code

Description

GERSEW600 DN600 EZIpit™ Rubber Ring


MAINTENANCE HOLE – ACCESSORIES

SPECIFICATION -WSA PS-314 Steps for Underground Man Entry Chambers -WSA PS-315 Fixed Ladders -WSA PS-316 Ladders, Stainless Steel

-WSA PS-317 Ladders, Hot Dipped Galvanised - WSA PS-328 Step Irons Galvanised Ferrous or Stainless Steel

Access Chamber Fittings

Clamps – for access chamber drop

Type A

Type B

Material

Galvanised steel

Brand(s) A & P Steel Fabrications

Central Springworks

Four B. Engineering

J.T.Chapman Engineering

Nominal size

(mm)

Type A - For cast in situ access chambers 100 150

Nominal size

(mm)

Type B - For precast access chambers 100 150


Ladder

Material

Galvanised steel

Stainless Steel

Glass-Fibre Reinforced Plastic ladder

Brand(s) Add-A-Step (GRP only)

Central Springsworks (Galvanised steel & SS only)

Nextep Miyama (GRP only)

Add-a-Step (GRP only) Special Conditions SS rebar may be used as an

alternative for SS ladder rungs however the knurling on the rebar must face the top of the ladder to give foot purchase

Ladder fixing component – floor fixing attachment

Material

Galvanised steel

GRP

Brand(s)

A & P Steel Fabrications

Central Springsworks

Four B Engineering


Add-A-Step

Nextep Miyama

Special Conditions For compatible Galvanised steel ladders

Ladder fixing component – holdfast, wall attachment

Material Galvanised steel

GRP

Brand(s)


Four B Engineering


Add-A-Step

Nextep Miyama


Special Conditions For compatible Galvanised steel ladders.

Holdfast must fit flush against the manhole wall

Ladder fixing component – splice plate

Material Galvanised steel

GRP

Brand(s)


Four B Engineering


Add-A-Step

Nextep Miyama

Special Conditions For compatible Galvanised steel ladders.

Masonry fasteners

Material Stainless Steel

Grade 316

Brand(s)

Powers Fasteners Australasia

Ramset

Hilti

Type Size Supplier

(A) For drop pipe clamps Throughbolt M10 x 80 Powers Fasteners Australasia Trubolt M10 x 60 Ramset HSC - AR M10 x 40 Hilti

(B) For ladders in precast access chambers Throughbolt M12 x 80 Powers Fasteners Australasia Trubolt M12 x 67 Ramset HSC - AR M12 x 60 Hilti

(C) For ladders in cast in situ access chambers Socket Anchor M16 Powers Fasteners


Throughbolt M16 x 105 Powers Fasteners Australasia Trubolt M16 x 125 Ramset HST - R M16 x 140 Hilti

Stepiron

Material Brand(s) Special Conditions

Galvanised steel

Stainless steel – Grade 316

Plastic encapsulated steel

Aymroo (Plastic encapsulated steel only)

A & P Fabrications


Greg Sewell Forgings

M. A. Industries

Nextep Miyama (Plastic encapsulated steel only)

Gatic

Minimum width 283mm centres

Steps must be cast insitu

All stepirons must have a foot stop each side.

Some plastic encapsulated step irons may not be compatible with some access chamber formwork

Type Supplier

Galvanised steel A & P Fabrications



M. A. Industries

Gatic

Gatic (drop front)

Stainless Steel A & P Fabrications



M. A. Industries

Gatic

Plastic encapsulated steel Aymroo Nextep Miyama

Protective MH Coatings

Material Various

Brand(s)

Tenix Super Epoc System, min’ thickness 3mm

Azco Nobel – Interzone 396 min’ thickness 1.5mm

Amercoat (To be used in conjunction with Amercoat CC50, CC513, CC703/2)

Parchem Construction Supplies –


Nitomortar EL, min’ thickness of 5mm, and Nitomortar ELS, min’ thickness of 3mm

Special Conditions Protective MH coatings must be applied by South East Water approved contractors. Refer South East Water’s “Approved Contractors – Protective Concrete Coatings List” Ref Specification No. 03-01 Coating systems for concrete in contact with sewerage

MH coatings may be specified as protection for concrete against gas attack.

Maintenance Hole Fittings For Maintenance Hole fittings, e.g. MH couplings, drop bends, etc refer to appropriate pipeline systems


ACCESS COVERS

SPECIFICATION - WSA PS-290 Access Covers for Water Supply and

Sewerage to AS 3996 - WSA PS-291 Access Covers for Water Supply and Sewerage to EN 124

Access cover and frame

Material Cast Iron/Ductile Iron/Steel

Brand(s)

Access Covers Australia BCP Beresford Milnes-Gatic Havestock Webforge Godfrey & Synon Icon (CI & D) Upwey Group (Restrictions apply) ACO Polycrete (Rhinocast) SVC Products Rocla Hygrade UBER

Special Conditions Vegetation rings are required when not in a sealed or paved surface Covers to be opened with traditional “Gatic” style key

Bolt–down covers may only be specified with the

approval of SEW. To be used only where

specified. Gas tightness is required for all covers Covers must display the following information: Sewer Class Weight

Manufacturer

Upwey Group Retrofit MH covers: shall be restricted to areas that are not

subject to future surface alterations, i.e. they may be used in bluestone laneways, footpaths, nature strips, etc, but not within bitumen pavements;

shall not be used where they might be subject to levels of traffic that might be in excess of what you might expect in a laneway;

securing pins and locking bolts shall not be used expect with the express permission of South East Water


Clear opening size

(mm)

Supplier Description

375 dia Havestock Class B & D, DI solid top for use with IS’s and MS’s

Milnes-Gatic

Class B & D, DI solid top & concrete infill for use with IS’s and MS’s

Webforge Class B & D, DI solid top for use with IS’s and MS’s

600 dia Access Covers Australia Class B & D, DI, solid top

BCP Beresford

Class B & D, DI, solid top

Webforge Class B, DI solid top & deep flange frame for installation with pre-cast MH’s

Class B & D, DI, solid top

Class B, deep flange frame

Class B, “Snap-lok” self locking covers (Provisional approval withdrawn)

Havestock Class B & D, DI, solid top & concrete infill

Hygrade UBER Class B and Class D. Only approved for use in non-trafficable areas

Icon Class B & D

Milnes-Gatic Class B & D, DI solid top & concrete infill

ACO Polycrete (Rhinocast) Class B & D, DI, Solid top

Cast iron frame

Godfrey & Synon

Class B & C, for replacement of existing

concrete covers only. Not for use in roadways

Upwey Group Class B, D & E, DI & concrete infill

Class D, retrofit covers for the replacement of heavy “diamond” covers

For operational use only

Retrofit covers are restricted to areas that are not subject to future surface alterations, i.e. for use in bluestone laneways, footpaths, nature strips, etc, but not within bitumen pavements.

Locking bolts and pins shall not be used to seal covers

SVC Products Class B and D, circular cast iron access cover and frame with concrete infill

Class B has 610mm dia clear opening

Class D has 600mm dia clear opening


Durham & Son Class B and D 600mm dim clear opening DI cover and frame with a solid top

Optional bolt down cover to frame using SS bolts

Rocla Class B and D access cover and frames with concrete infill

600 x 600 750 x 750

Access chamber tops (cover & frame) - precast

Material Brand(s)

Reinforced concrete cast around an access cover and frame

Access Covers Australia

Humes

Rocla

SVC

ACO Polycrete

Gatic

Component Access Covers

Australia

Humes Rocla SVC Gatic

600 dia opening Class B & D

750 x 750 Class D Jointing Mastic

Inspection cover

Material

Reinforced concrete, recycled plastic or cast iron

Brand(s) Access Covers Australia

Australian Recycling Technologies (recycled plastic)

Everlevel (cast iron)

Geelong Precast

SVC

Special Conditions Covers must display the word Sewer

Type Material Special Conditions

Frame Reinforced concrete Frame Recycled plastic Non-trafficable. Private properties clear of driveways Frame – extra light Reinforced concrete Non-trafficable but OK in driveways and footpaths Lid Reinforced concrete Non-trafficable but OK in driveways and footpaths Frame and Lid (Heavy Duty) Cast iron Acceptable in trafficable conditions


Cover adjustment rings

Material

Brand(s)

Special Conditions

Cast Iron/Ductile Iron/Steel

Havestock

For use in raising cover levels

May only be used on same name brands

Clear opening size

(mm)

Supplier Description

600 dia Havestock

Class B & D


MISCELANEOUS

Jointing coupling (Type B)

Material Synthetic elastomer (EPDM or SBR or Nitrile Rubber ) stainless steel

Brand Hepworth “Flex-Seal” Coupling

Band Seal

Suppliers LEAP P/L

CSR Humes

Special Conditions

Coupling must include a SS shear band

For repair purposes only. Not to be used in new installations without approval of SEW

Not to be used as expansion joints

Nominal size (DN)

100 - 600

Stainless Steel OB band

Material Stainless Steel 316 with Nitrile rubber gasket

Brand(s) Tyco

Iplex (Crevet)

Special Conditions Stainless Steel OB bands may be used on retrofits and renewals only

Stainless Steel OB bands must NOT be used on new works

Only those OB bands where the oblique junction extends into the existing pipe shall be used, to ensure the band is properly keyed into position.

Where bands are used on concrete pipes the location must be recorded.

Suitable to be used on most types of sewer pipe.

100mm to 600 mm size range available

Available with a 100mm or 150 mm offtake The oblique offtake must be supported by concrete to prevent the band “rolling”


Flap-Gate – Water & Gas Seal for Emergency Relief Structures (ERS’s) Material Brand(s) Special Conditions

FRP Humes (Humes-King Floodgate) To be used on Emergency Relief Structures (ERS’s) to provide a water and gas seal

Grease – Seal MH covers Material Brand(s) Special Conditions

Grease Milnes-Gatic (Australia) To be used on all MH covers to seal against gas and protect against corrosion

Carrier Pipe Spacer Material Brand(s) Special Conditions

Thermoplastic TD Williamson (DN50-DN700) Kwik-Zip HD Series (DN110-DN1120)

Hydrophilic Rubber Material Brand(s) Special Conditions

Rubber Corkjoint Australia Iplex Pipelines Exel Hydrophilic rubber seals may be required when connecting PE pipelines to concrete access chambers.


Geotextile fabric Material Polypropylene, polyester

Brand(s) Geotextile Supplies and Engineering P/L (Geotex 30c , Geotex 501, Geotex A19) Geofabrics Australsia Pty Ltd (bidim A14, bidim A24)

Special Conditions A requirement when using single size aggregate for embedment to prevent migration of fines Designers should also consider using geotextiles in various ground conditions or where water is present


CEMENT, CONCRETE & QUARRY PRODUCTS

All suppliers of cement, concrete and quarry products are required to have ISO 9001 accreditation. The following link will take you to the South East Water Website, where you can view lists of South East Water ISO 9001 Accredited Suppliers: South East Water – Managing Water Infrastructure

Documents

GRAVITY SEWER RETICULATION - Home - South East …southeastwater.com.au/.../Approved_Products-Sewer.pdfPolyethylene (PE) Pipe Butt/Butt – solid wall ..... 61 POLYETHYLENE FITTINGS