Upload
others
View
18
Download
0
Embed Size (px)
Citation preview
GREEN ARMOR
PRODUCTDESCRIPTION
T h e G R E E N A R M O R ®Process is characterised by theapplication of a 3-dimensionalGeo-Mat, as defined in thenorm NF EN ISO 10318 ,combined with a seedingprocess using a ‘projected fibremembrane’ like EURO-MATFGM-ET
EURO-MAT FGM-ET i s ablended mulch product, readyto use, 100% bio-degradable,and is made of “PREMIUM”vegetable fibres (NFU code:44-4551) with the addition ofstabilizing agents, germinationa c t i v a t o r s a n d g r o w t henhancers.
T h e 3 D G e o - M a t i s n o tbiodegradable and is made ofdurable , UV-stabi l i zed,thermally fused polyamide(PA6) filaments.
RGDFGDG
GDFGDFG
FGDFGD
FGDFGD
FGDFGD
EURO-TEC, Z.A. Grandalisse, 148 Impasse vue du ciel, 69124 COLOMBIER SAUGNIEU+33 (0)4 37 47 20 20
ACTION FIELDSThe GREEN ARMOR ® Process is characterised by a quick establishment of a vegetable and durablyreinforced solution for areas prone to important leaching by run-off water or strong currents and wherea simple vegetation cover would be insufficient.
3-Dimensional Reinforced Anti-Erosion Protection for the Long Term :The synergetic combination of a 3D GeoMat together with the projected fibre matrix or FlexibleGrowth Medium EURO-MAT FGM-ET allows for the establishment of a long-term anti-erosionprotection against wind and water erosion. This process provides double protection and soil-stabilisation thanks to the GeoMat’s action and the accelerated intertwining of roots through thenylon filaments.
Accelerates Germination:Its water retention capacity allows the seeds and seedlings to develop in a “controlled”environment where it concerns temperature and hydro stress, as temperature peaks are flattedout and evaporation/transpiration is being limited. The presence of germination activators andgrowth enhancers allows for quick establishment of the green cover.
Resistance and Structural Integrity:The 3-D GeoMat is made of intertwined three-dimensional polyamide (PA6) filaments. In order toimprove the cohesion of the GeoMat, all filaments are soldered at each contact point. ThisGeoMat provides a homogeneous reinforcement that is not bio-degradable, UV resistant andcrush and shear resistant.
FRGRGRG
SPECIFICATIONS & PERFORMANCE3D GeoMat specifications
Composition Polyamide 6 (PA6)
Thickness @ zero stress 20 mm
Surface Weight (g/m²) 400 g/m² (follows NF EN ISO 9864)
Resistance to traction, deformation under tear (ASTM D4595-86)• In the direction of production (NF EN ISO 10319)• Cross direction (NF EN ISO 10319)
2.3 kN/m1.5 kN/m
% UV Stabilizer 95 %
% Resistance 80 %
dsfsdffsd
dfsdf
fdsfsdf
fsdfsd
EURO-MAT FGM-ET Specifications
Tracer 1% (green)
Prime wood material Betula papyrefera / Populustremuloides
Fibre length (mm) 2 to 10 mm
% Wood Fibre 75 %
% Organic Stabilizer and Fluidizing Agent 10 %
% Biodegradable Reinforcement Fibre 9 %
% % Germination activator and Growth Enhancer 5 %
% Water Retention Capacity / Dry Weight (ASTM D7322) 1 500 %
% Organic Matter % Mineral Matter 99,3 % 0,7 %
PERFORMANCE OF THE GREEN ARMOR PROCESS
‘C’ Factor 0.01
Retarding range values (ASTM D6460) 0.025-0.0045
Allowed Force after vegetation establishment (ASTM D6460) 0.81 kN/m²
Allowed Speed after vegetation establishment (ASTM D6460) 6.1 m/s
Allowed Force before vegetation establishment (ASTM D6460) 0.28 kN/m²
Allowed Speed before vegetation establishment (ASTM D6460) 4.9 m/s
Vegetation Coverage (ASTM D7322) 800 %bgvbgvbg
APPLICATION- Areas prone to quick rise/fall of water levels : storm water bassins, spillways- Areas prone to tear by strong currents or discharge phenomenon: diversion channels, riverbanks,streambanks, stormwater conveyance channels- Areas prone to strong erosion risks, due to the slope or by the nature of substrate : steep slopes,embankments, landfill slopestvbggbnyh
fhggjhg
h,hjh
EURO-TEC, Z.A. Grandalisse, 148 Impasse vue du ciel, 69124 COLOMBIER SAUGNIEU+33 (0)4 37 47 20 20