HGS
mm 0.8 0.75-0.80
mm ± 0.10 ± 0.05
Rev. (min) 350 400
N (min)
N (min)
20 25
Rating(min)
3 ≥ 3
%(max) 0.55 0.32
%(max) 1.05 0.5
Rating (min),
Appearance
For Gloss finish - 3
For Other finish - 4
≥ 3
≥ 4
Rating
(min) For Gloss finish - 3
For Other finish - 4
≥ 4
≥ 5
Rating (min)5 5
4 ≥ 4
Rating (min)For Gloss finish - 3 For Other
finish - 4
≥ 3
≥ 4
Rating (min) 4 to 5 ≥ 5
Rating (min) 3 ≥ 4
EN ISO 1183 -1 g/cm (min) 1.35 1.4
TEST METHOD AS
% Reduction 95.0 minimum 99.99
3
Classification
Thickness
Thickness Tolerance
Resistance to dry heatat 180°Ċ
Resistance tosteam
Resistance to color changein Xenon arc light
Resistance to cigaretteburns
Density
Resistance to surface wear
Resistance to impact withsmall diameter ball
Resistance to scratching
Resistance to immersion inboiling water
Dimensional stability atelevated temperatures
Machine direction
Cross direction
Resistance to stainsGroup 1&2 Group 3
Anti-BacterialActivityTest*
EN 438-2 - 10
EN 438-3 - 6.3
-EN438 3.5.3
EN 438-2 - 20
EN 438-2 - 25
EN 438-2 - 17
EN 438-2 - 12
EN 438-2 - 16
EN 438-2 - 26
EN 438-2 - 14
EN 438-2 - 27
EN 438-2 - 30
ASTM D 2180
PROPERTIES TEST METHOD ASPER BS EN 438PART2&3: 2005
UNITS.NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Specified Values GreenlamValues
Greenlam High Pressure Laminates ( 0.8mm )
