Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
SALE BY ONLINE AUCTIONOn the instructions of Sean Bucknall and Graham Randall of Quantuma the joint administrators of JD Norman Lydney Limited
GREENSAND CASTING FOUNDRY AND FINISHING MACHINERY FOR THE PRODUCTION OF CHILLED/DUCTILE IRON CAMSHAFT CASTINGS (Subject to Availability)
Including:Foundry Moulding / Furnaces• BMD Dynapulse automated moulding
line, 812 x 812 x 250mm mould size, moulding capacity circa 5 million per annum, moulds 7 to 9 cam shafts per mould at a line speed of 160 moulds per hour, moulding length capacity up to 760mm
• Robots (4) by Fanuc R-2000iB 6-axis robot/chill placing (2 off), B-J2/ Arc Mate 120i robot filter placing & R-J3 oil spray
• Inductotherm 3,000kW Power-Track Induction Furnace, Transformers and Rectifiers (2018)
• Inductotherm 2,500kW Power-Trak Induction Furnaces, Transformer and Rectifier (2 off–c.1992)
• Cooling lines• General Kinematics shaker/ mould
knock-out machine and down vibratory conveyors
• Spencer & Halstead 3m dia. x 1.8m rotary shot blast machine, monorail infeed and outfeed system
Sand Plant comprising: • Storage silos (3 off)• Back storage silos (2 off) • Eirich DW2914MZ9 sand mixer • UHDE DWF sand cooler
Finishing• Koyama automatic grinding machines (14 off-2004-2012)• TIBO 6-spindle deep hole run drilling machines (5 off) • TIBO/TBT 4-spindle deep hole gun drilling machine• Bliss Ryder Twin Station Automatic end
facing machine with 4 cutting heads • Mollart Sprint 2-spindle deep hole gun
drilling machine (2 off)• Mollart 4-spindle deep hole gun drilling machine• Marpol grinder/polisher machines (8 off)Compressors• Atlas Copco GA75 / Atlas Copco G160
/ Atlas Copco GA132 / Atlas Copco GA90VSD
Vehicles• Barford SX6000 Dumper Truck (2006)• CASE JX80 Tractor (2006)• AW Engineering Twin Axle Trailer (2005)• ABBEY Bowser (2007)• Citroen Relay Drop-side van (2012)General• Circa £500,000 (at cost) of Spares • Laboratory and Workshop equipment • Quality Control• Standby Generator • Internal Craneage
Offers for foundry plant considered pre-auction UP TO 1,000 LOTS IN TOTAL
To bid please go to www.lsh.co.uk/mba or
ON VIEW: Monday 28th and Tuesday 29th September 2020 between 10.00am and 4.00pm
AT: JD Norman Lydney, Tutnalls Street, Lydney, GL15 5PX, UK
BIDDING CLOSES: Thursday 1st October 2020 from 3.00pm
COLLECTION: Monday 5th to Friday 16th October 2020 between 10.00am and 4.00pm only (excluding weekends)
This is a full PPE site – visitors must wear adequate PPE at all times
For further details please contact: Adam Marx | [email protected] or Jason Hall | [email protected] Smith Hampton, 1st Floor, Tower Wharf, Cheese Lane, Bristol, BS2 0JJ