GreenVision Xceed BRP371_372_373 Mid Power Extended Ppt 19 Jun 2014

June 2014 PLS Growth Markets Confidential

GreenVision Xceed LED Road(Mid‐Power LED Platform)

Eng Yong LiangPLS Growth MarketsJun 2014

June 2014 PLS Growth Markets Confidential 2

Road Lighting TrendsAn increasing level of social and environmental responsibility

• Stronger interest in ‘Energy Saving Solutions’• Need for recyclable ‘green products’• Govt. recyclable subsidies & legislation at municipal level for energy saving & CO2

reduction

Improving ‘quality of life’ and ‘well being’ considerations• Enhanced comfort, safety and security • Not just light on the road but better, controllable & exciting lighting solutions• Feeling of civic pride, belonging

Rapid urbanization; Economic expansion; GDP Growth; Increasing Wealth• More roads as a result of rapid infrastructure development • Upgrading city centers, residential areas, parks & squares


“Maximize energy savings,Simple & Economical”

Introducing …Philips GreenVision Xceed BRP371 / 372 / 373 LED Road Lighting

BRP371/372/37333


City Spirit

A modern LED urban post top solution

Up to 70W replacement of residential streets

City Soul

A clasic LED urban lighting solution to create city identity

Up to 150W replacement of urban streets

GreenVisionMiniReliable energy savings for small pedestrian roads

Up to 70W replacement of small pedestrian residential roads

LED Road Lighting Product Applications

GreenVision Xceed

Maximize energy savings, Simple & Economical

Up to 400W replacement of major/city roads

4


•Highways & Expressways

•City main traffic roads

• City shopping & commercial roads

• Industrial roads

• Residential streets

Overview / Applications

55


Features & Benefits

Maximize energy savings

Up to 50% Energy Saving.with full compliance to road lighting safety standards.

More Light on the Road. Superior watts per square meter (W/m2) performance – Using less energy to light each m2 on the road.

Reliability

Unparalleled strength and durability. Solid die-cast housing with high ingress protection ensures long life.

Excellent thermal management.significantly reduces failures.

World class components. Approbated, high quality LEDs, drivers etc.

Surge Protection. Fitted with Surge Protection Device up to 10KV ensures reliability

Serviceable

Tool-less opening Tool-less opening of housing Tool-less gear tray replacement

ControlOptions for standalone or tele-managed controls & PE Cell

6


Maximize Energy SavingsMaximize Energy Savings -Up to 50% Meaningful Energy SavingsWith full compliance to road lighting safety standards.

Philips GreenVision Xceed delivers a system efficiency of 90lm/W resulting in up to 50% energy savings against conventional SON systems.

High Efficiency Drivers minimizes energy loss

7


Optimized Road Lighting Performance1. Maximized Energy Savings - Optimized Road Lighting Performance Selection of different optical lenses with flexible lumen packages and optics to suit different applications.

- More Light on the Road Superior watts per square meter (W/m2) performance – Using less energy to light each m2 on the road.

Philips GreenVision Xceed out-performs other Road Lightings:-

Multiple spotMulti-layer

Multi-layer optic design guarantees light uniformity. The innovative Led PCB design ensures road safety in the unlikely event of individual LED failure

8


Philips takes care of all the steps from LED efficiency, system efficacy and road lighting optical design to achieve the best W/m2 performance

System LED efficiency

System efficacy

Light on the road meeting

safetySafety Energy Saving

Low grade LED system ☺

lower system efficacy will result in lower luminance on the road, Impacting visibility and non-compliance to safety standards

More LEDs are needed resulting in higher energy consumption

Competitor LED system ☺ ☺ poor optics resulting in poor light

distribution on the groundMore lighting poles needed and thus higher energy consumption

Philips GreenVision

Xceed ☺ ☺ ☺ enough illuminance, perfect uniformity and minimized glare

Reduce the no. of LED units,reduce pole numbers; Optimized energy saving

☹ ☹☹

☹☹☺

☹☹☺

Philips GreenVision Xceed delivers true energy saving with the lowest W/m2.

LED EfficacyLight out of the chip

System EfficacyLight out of the fixture

Light falling on the road

Maximized Energy Savings : True Energy Savings vs Competitors

9


Best-in-class lens design to direct maximum light onto the road:

Led

Revolution Axis of the

outer profile

Outer profile

Revolution axis of the inner profile

Inner profile

Maximize Energy Savings : Best-in-class Lens Design & Optics Integration

•Inner profile curve for maximumspacing between poles

•Outer profile curve to cover higher road widths

Optics integration: Light and energy loss is minimized with intelligent light source arrangement inside the housing.

The distance between the lens and the housing is calculated to ensure no light is blocked by the housing itself.

The distance between each lens is precisely calculated so the lenses do not block each other's light rays.

Light Ray

Housing

Edge

10


Different optics to suit various road widths:

DM lensMedium beam optics for 1-3 lane roads

DW & DW2 lensWide beam optics for 3-4 lane roads

Maximize Energy Savings : Optics

11


Reliability

ReliableEnsures long life

- Unparalleled strength and durability. Solid die-cast housing with high ingress protection ensures long life.

- Excellent thermal management.significantly reduces failures.

- World class components. Fully approbated, high quality LEDs, drivers, etc.

12


Unparalled Strength & DurabilityUnparalleled strength and durability. Solid die-cast housing with high ingress protection ensures long life.

Full Die-Cast Aluminium Housing: IK 08 ratingPhilips GreenVision Xceed LED Road boast a solid die-cast IK 08 rated housing, ensuring high strength and safety on the pole. The solid die-cast aluminium also has excellent heat dissipation, extending the life of the components inside.

Full IP 66 Ingress Protection Against Water & Dust (without glue)The double-wall construction, high-quality silicone gasket deliver reliable IP66 performance over the unit's lifetime. No glue is used in the construction to prevent any breakdown of the water and dust proof seal. Full IP66 protection ensures best lighting performance and reduces maintenance cycles, saving time and money.

BRP371 / 372 / 373

13


Excellent Thermal ManagementReliability Ensured with excellent thermal management significantly reduces failures.

Thermal simulation

Philips GreenVision Xceed has been analyzed to optimize heat behavior and deliver excellent system performance.

A CEM3 Printed Circuit Board is used to efficiently remove heat from the LED’s & transfer it to the housing thereby lowering as much as possible LED’s operating temperature.

The CEM3 PCB is mounted on the housing using a highly efficient Thermal Interface Material. The TIM ensures an efficient & robust thermal contact.

Luminaire Housing Thermal Distribution

Painted housing which can enhance radiation by increasing emissivity from 0.2 to 0.8, effectively dissipating an additional 20w of heat.

The housing shell under the circuit board was designed to enhance heat transfer & ensure perfect contact b/w the LED board & housing to maximize heat dissipation.

14


Electromagnetic CompatibilityPhilips GreenVision Xceed is designed with separate cavities for power and LED module. Optimized wiring topology, EMI filter and surge protection in the power chamber enables excellent ability to control EMI / EMC. Good electromagnetic compatibility guarantees the life of the LED module, and also to ensures good operation of other electrical equipment.

Separate LED cavity and Power cavity Optimized wiring in Power cavity clean and design of electronic parts placements

Surge Protection Device for complete luminaire (Driver and LED Module)

15


World Class ComponentsWorld class components. Fully approbated, high quality LEDs, drivers, etc.

LED Optics Thermal Driver Luminaire

Philips GreenVision Xceed is made with fully approbated components including the LED chips/module, lens/optics, driver, housing materials.

16


Surge Protection

17

Surge Protection Resistant to peaks and surges in the installation.

Philips LED Streetlight is protected with 10KV Surge Protection Devices to ensure the driver and LED modules are not damaged and the light stays on.

DriverSPD to protect driver & LED Module

LED Module

17

‐ Surge > 10KV may break the SPD, but protect the luminairesince the circuit will be cut‐out.

‐ Surge < 10KV, SPD will clamp voltage down to driver safe level.

‐ Driver internal surge protection will clamp surge voltage.

LED Module


ServiceableServiceableTool-less opening and tool-less gear tray change for ease of maintenance

Tool-less opening of housingTool-less gear tray change

1. Press the cover

2. Turn the clip

18


Light Weight DesignEase of installation & maintenance with Light Weight DesignGreenVision Xceed’s light weight design enables the use of poles with lighter weight and reduced strength. This in turn reduces the cost of the poles and at the same time improve the safety factor.

BRP371=6.5kg BRP372=8kg BRP373=14kg

Streetlight = 14.5kg(assuming the same area of wind pressure)

Light pole fulcrum torque= 14.5kg x 9.8 x arm 1m= 142N.m

Streetlight = 18kg(assuming the same area of wind pressure)

Light pole fulcrum torque= 18kg x 9.8 x arm 1m= 176N.m

Reduce the torque of approximately 20%, increase the safety factor of the poles

19


Dimensions

BRP371=6.5kg422 x 318 x 136mmMax. 11,200 lumens

BRP372=8kg522 x 318 x 136mmMax. 15,900 lumens


20


Test Reports for GreenVision Xceed(Mid‐Power LED Platform)

21

Test Reports

1. CB IEC60598 Test Report2. IEC EMC Test Report3. IEC EMF Test Report4. IEC Photobiological Test Report5. Lumen Depreciation Test Report‐ 3000 hours for Max Power for each housing type (pending)6. ASNZ60598 Test Report7. AS1158 Test Report8. LM79 Test Report (on request for selected models)9. All possible LED driver types to be included in test report (including both fixed and programmable)


Tele‐managed Control Solutions

22

GreenVision Xceed can be used together with Philips Tele-managed control systems

CityTouch ‐ LightWaveAmpLight

The Philips Outdoor Control system uses the GPRS/3G wireless communications network to connect to the central server or cloud server to enable control and monitoring of the outdoor lights. The AmpLight system controls and monitors groups of light points from the power supply cabinet. Access to the central server or cloud via a web‐based interface enables the user to connect to the system from a control room, laptop, and/or mobile phone. Through a secure connection, the system is accessible from any location and provides a fast assessment of the system’s status, alarms and other events.

Under‐development

June 2014 PLS Growth Markets Confidential 23

Features Benefits

Remote monitoring & Control

• Improve service quality

• Increase safety

• SmartGrid Ready

Dimming• Energy saving

Asset management • Improve maintenance

• Reduce downtime

Energy metering

• Accurate billing

• Document savings

• Proof point for technology

implementation

Retrofit• Suitable for existing

infrastructure

LIGHTPOINTMANAGEMENTLIGHTPOINTMANAGEMENTLIGHTPOINTMANAGEMENT

GROUP MANAGEMENTGROUP MANAGEMENT

LIGHT POINT CONTROLLIGHT POINT CONTROL

Good Best

GreenVision Xceed Control SolutionsDynadimmer in Programmable Drivers

AmpLight +Programable+ Drivers

CityTouch LightWave+ Programmable Drivers

Tele‐managed Solutions Standalone


GreenVision Xceed LED RoadThe new GreenVision Xceed LED road a full range road light applicable for highways, city roads, residential areas and industrial estates. It has 3 different luminiare housings for M1‐6 roads. Lumen package up to 31K lumens.

‐ Full die cast aluminum housing: IK 08 rating

‐ Full IP66 Ingression Protection against water & dust

‐ Excellent Thermal Management

‐ Excellent Reliability with rated life at 50,000hrs

‐ Best Optics to achieve low W/m2 power density

‐ High quality light output (CRI>70; Colour Tempt – 3000/4000/5700K)

‐ Surge Protection 10KV

‐ Tool‐less housing opening

‐ Tool‐less gear tray change

‐ Options with Xitanium Programmable Drivers

2424

BRP371=6.5kg422 x 318 x 136mmMax. 11,200 lumens




GreenVision Xceed, Mini & Tunnel LED(Mid‐Power Platform)


Mid‐Power vs LEDGINE 3.0

Mid‐Power LED Platform• Lumen Efficacy ~ 95 – 100 lm/W• CRI Minimum 70• LED Chip < 7 SDCM• Up to 305W at 31,700 lumens output• CEM3 PCB• ‐ 40oC < Ta < 45oC

Type LED Chip PCB Module LensMid‐Power Nichia NF2L757DR‐E 24, 48 DM, DW, DW2 (Sept 2014)ledgine 3.0 Luxeon T 8,12,16 DNE, DME, DWE

vs


GreenVision Xceed BRP371/372/373(Mid‐Power LED Platform – Standard 12NCs)

12NC Description

ColourTemptCCT

Driver DriveCurrent(mA)

Rated Lumen output(lm)

‐ 5%~ tolerance

Rated Power(W)+/‐ 5%

Driver Type

911401675802 BRP371 LED56/NW 55W 220‐240V DM MP1 4000 700 5607 55 Fixed911401675702 BRP371 LED75/NW 75W 220‐240V DM MP1 4000 700 7476 75 Fixed911401675602 BRP371 LED93/NW 90W 220‐240V DM MP1 4000 700 9345 90 Fixed911401675402 BRP371 LED112/NW 110W 220‐240V DM MP1 4000 700 11214 110 Fixed911401675502 BRP372 LED131/NW 125W 220‐240V DM MP1 4000 700 13083 125 Fixed911401674802 BRP372 LED150/NW 145W 220‐240V DM MP1 4000 700 14952 145 Fixed911401674702 BRP372 LED159/NW 150W 220‐240V DM MP1 4000 660 15860 150 Prog.911401674602 BRP373 LED187/NW 185W 220‐240V DM MP1 4000 700 18690 185 Fixed911401674502 BRP373 LED206/NW 200W 220‐240V DM MP1 4000 700 20559 200 Fixed911401674402 BRP373 LED224/NW 220W 220‐240V DM MP1 4000 700 22428 220 Fixed911401674302 BRP373 LED243/NW 240W 220‐240V DM MP1 4000 700 24297 240 Fixed911401674202 BRP373 LED262/NW 255W 220‐240V DM MP1 4000 700 26166 255 Fixed911401674102 BRP373 LED280/NW 270W 220‐240V DM MP1 4000 700 28035 270 Fixed911401674002 BRP373 LED300/NW 290W 220‐240V DM MP1 4000 700 29904 290 Fixed911401673702 BRP373 LED317/NW 305W 220‐240V DM MP1 4000 660 31720 305 Prog.911401673602 BRP371 LED51/WW 55W 220‐240V DM MP1 3000 700 5102 55 Fixed911401673802 BRP371 LED68/WW 75W 220‐240V DM MP1 3000 700 6803 75 Fixed911401673502 BRP371 LED85/WW 90W 220‐240V DM MP1 3000 700 8504 90 Fixed911401673402 BRP371 LED102/WW 110W 220‐240V DM MP1 3000 700 10205 110 Fixed911401673302 BRP372 LED119/WW 125W 220‐240V DM MP1 3000 700 11906 125 Fixed911401673202 BRP372 LED136/WW 145W 220‐240V DM MP1 3000 700 13606 145 Fixed911401673102 BRP372 LED144/WW 150W 220‐240V DM MP1 3000 660 14432 150 Prog.911401673002 BRP373 LED170/WW 185W 220‐240V DM MP1 3000 700 17008 185 Fixed911401672902 BRP373 LED187/WW 200W 220‐240V DM MP1 3000 700 18709 200 Fixed911401672802 BRP373 LED204/WW 220W 220‐240V DM MP1 3000 700 20409 220 Fixed911401672702 BRP373 LED221/WW 240W 220‐240V DM MP1 3000 700 22110 240 Fixed911401672602 BRP373 LED238/WW 255W 220‐240V DM MP1 3000 700 23811 255 Fixed911401672502 BRP373 LED255/WW 270W 220‐240V DM MP1 3000 700 25512 270 Fixed911401672402 BRP373 LED272/WW 290W 220‐240V DM MP1 3000 700 27213 290 Fixed911401672302 BRP373 LED289/WW 305W 220‐240V DM MP1 3000 660 28865 305 Prog.

Note: ‐ Mid‐Power LED Platform with

LED Nichia 3000K/4000K/5700K

‐ Drive current 700mA as standard product range, drive current at 530mA 350mA & others on request.

‐ Lens available as of Jun 2014 is DM

‐ Lenses DW & DW2 are under development. Target to be available in Sept 2014.


GreenVision Mini BRP330 &Tunnel LED BWP351(Mid‐Power LED Platform)

12NC Description

ColourTemptCCT

Driver Drive

Current(mA)

Rated Lumen output(lm)

‐ 5%~ tolerance

Rated Power(W)+/‐ 5% Lm/w

Driver Type

911401675002 BRP330 LED37/NW 37W 220‐240V DM MP1 4000 700 3738 37 99.9 Fixed911401675302 BRP330 LED56/NW 55W 220‐240V DM MP1 4000 700 5607 55 100.5 Fixed911401673902 BRP330 LED75/NW 75W 220‐240V DM MP1 4000 700 7476 75 101.6 Fixed911401675102 BRP330 LED34/WW 37W 220‐240V DM MP1 3000 700 3402 37 91.0 Fixed911401675202 BRP330 LED51/WW 55W 220‐240V DM MP1 3000 700 5102 55 91.5 Fixed911401674902 BRP330 LED68/WW 75W 220‐240V DM MP1 3000 700 6803 75 92.5 Fixed911401682102 BWP351 LED56/NW 55W 220‐240V DM MP1 4000 700 5607 55 100.5 Fixed911401682002 BWP351 LED75/NW 75W 220‐240V DM MP1 4000 700 7476 75 101.6 Fixed911401681802 BWP351 LED93/NW 90W 220‐240V DM MP1 4000 700 9345 90 101.6 Fixed911401681902 BWP351 LED112/NW 110W 220‐240V DM MP1 4000 700 11214 110 102.2 Fixed

Note: ‐ Mid‐Power LED Platform with LED Nichia 3000K/4000K/5700K‐ Drive current 700mA as standard product range, drive current at 530mA 350mA & others on request.‐ Lens available as of Jun 2014 is DM‐ Lenses DW & DW2 are under development. Target to be available in Sept 2014.‐ Test Reports are pending.


GreenVision Xceed ‐ Description Explanations


Documents

GreenVision Xceed BRP371_372_373 Mid Power Extended Ppt 19 Jun 2014