GRILLES AND REGISTERS - Complete Air Control … · LOUVERED FACE — SUPPLY AIR ... • Versatile selection and sizing ensures ... Models 61SV and 61SH Single Deflection Supply Grilles

GRILLES AND REGISTERS

G4

GRIL

LES

AN

D R

EGIS

TERS

G

GENERAL PRODUCT OVERVIEW

Models 51DV, 67DV

Models 51SH, 67SV

DOUBLE DEFLECTIONA dual set of individually adjustable blades are friction pivoted and canbe easily adjusted to provide maximum control of the air pattern forspread and deflection in two planes. Blades are spaced on 3/4" (19)centers.Aluminum – Models 51DV, 51DH Page G14Suffix '-O' adds a steel OBDSuffix '-OA' adds an aluminum OBDSteel – Models 61DV, 61DH Page G16Suffix '-O' adds a steel OBDStainless Steel – Models 67DV, 67DH Page G18Suffix '-O' adds a stainless steel OBD

GRILLES AND REGISTERSQuality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional work-manship with the backingof an industry leader – these add up to true value; prime reasons for specifying Nailor Grilles and Registers.

Architectural excellence and engineering selections demand high quality products and shipping schedules demand service; all part ofthe package.

LOUVERED FACE GRILLES AND REGISTERSThis series of grilles and registers are available in cost effective, corrosion-resistant steel, premium quality extruded aluminum or stainlesssteel construction. The blades are formed to a streamlined engineered contoured cross-section. Rigid, reinforced frames feature hairline-mitered corners. Optional opposed blade dampers have a screwdriver slot or lever operator for adjustment through the face of the register.As standard, the grilles and registers have countersunk screw holes in the frame, which make for an architecturally pleasing appearance.

LOUVERED FACE — SUPPLY AIR

• Comprehensive range of models and styles to choose from.

• Versatile selection and sizing ensures the correct product for anyspecific application.

• Material choice of premium quality extruded aluminum, cost-effective steel or stainless steel. Unique in our manufacturingprocess is the exclusive use of corrosion-resistant coated steel asused in the auto industry. The material has superb formingqualities and outlasts painted cold-rolled steel and galvanizedsteel by up to three times.

• Various border/frame types, combinations and mounting options.

• Balancing accessories.

• Superior finishes.

• Performance data in accordance with current international teststandards and the back-up of one of the finest 'in-house' testinglaboratories in North America.

SINGLE DEFLECTIONA single set of individually adjustable blades are friction pivoted and canbe easily adjusted to provide the desired spread or deflection in a singleplane. Blades are spaced on 3/4" (19) centers.Aluminum – Models 51SV, 51SH Page G15Suffix '-O' adds a steel OBDSuffix '-OA' adds an aluminum OBDSteel – Models 61SV, 61SH Page G17Suffix '-O' adds a steel OBDStainless Steel – Models 67SV, 67SH Page G19Suffix '-O' adds a stainless steel OBD

LOUVERED FACE GRILLES AND REGISTERS

G14

GRIL

LES

AN

D R

EGIS

TERS

G

Models 51DV and 51DH Double Deflection Supply Grilles and Registers are recommended for application in systems requiringmaximum flexibility. The front set of blades has the greatest effect on the air pattern and therefore should be selected based onparticular requirements. Vertical front blades will control the spread and throw distance of the air pattern whereas horizontal frontblades will control the rise and drop of the air pattern, typically directing warm air downwards or cool air upwards along the ceiling.

The combination of streamlined ‘teardrop’ shaped blades and 3/4" (19) spacing maintains a high effective free area average capacityof 75%, which minimizes outlet velocity, reduces pressure drop and assures quiet operation.

MODEL 51DV Vertical Front Blades

Model 51DV

Models:51DV and 51DH• Suffix '-O' adds a steel opposed

blade damper• Suffix '-OA' adds an aluminum

opposed blade damper

STANDARD FEATURES:• 1 1/4" (32) wide face border with a 1"(25) overlap margin standard, furnishedwith countersunk screw holes andmounting screws.NF Narrow frame with 1" (25) face borderand a 3/4" (19) overlap margin. O.A.flange to flange dim. = listed size + 1 1/4"(32). Concealed mounting is optional.

• Rigid, heavy gauge extruded frameswith reinforced mitered corners.

• Streamlined shaped extruded bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.

• Adjustable air pattern - Blades arefriction pivoted and easily adjusted toprovide desired spread or deflection.

• Available in sizes from 4" x 4" to48" x 48" (102 x 102 to 1219 x 1219)in single section construction. Multiplesection assemblies are available.

CONSTRUCTION MATERIAL:• High quality, extruded aluminumconstruction.

• Steel or aluminum integral dampers areopposed blade design with screwdriverslot operator.

FINISH OPTIONS:• AW Appliance White finish is standard.Other finishes are available.

FASTENING OPTIONS:• Type A Screw Holes (default)• Type C Concealed Mounting Straps• Type D Concealed Screw Holes• Type N None

OPTIONS AND ACCESSORIES:• IS Insect Screen• PF Plaster Frame• GK Foam Gasket• EQT Earthquake TabsFor additional options and accessories,see page G189.

MODEL 51DH Horizontal Front Blades

LIS

TED

SIZE

+ 1

3/4

" (44

) STD

.

LISTED SIZE + 1 3/4" (44) STD.

OPTIONALOPPOSED

BLADE DAMPER

LIS

TED

SIZE

- 1/

4" (6

)

3 9/16" (90)

1 13/16" (46) 1 1/4" (32) FACE

BORDER STANDARD


OPTIONALOPPOSED

BLADEDAMPER

LIS

TED

SIZE

- 1/

4" (6

)

3 9/16" (90)

1 13/16" (46)

LIS

TED

SIZE

+ 1

3/4

" (44

) STD

.

1 1/4" (32) FACEBORDER STANDARD

ALUMINUM DOUBLE DEFLECTION GRILLES AND REGISTERS• SUPPLY


G15

GRILLES A

ND

REG

ISTERS

G

Models 51SV and 51SH Single Deflection Supply Grilles and Registers are recommended for applications requiring pattern adjustmentin a single horizontal or vertical plane. They are generally used in a high side wall application where vertical blades will control thespread and throw distance of the air pattern to accommodate various layouts. Horizontal blades will control the rise and drop of theair pattern, typically directing warm air downwards or cool air upwards along the ceiling.


MODEL 51SV Vertical Blades

Model 51SV

Models:51SV and 51SH• Suffix '-O' adds a steel opposed

blade damper• Suffix '-OA' adds an aluminum


STANDARD FEATURES:• 1 1/4" (32) wide face border with a 1"(25) overlap margin standard, furnishedwith countersunk screw holes andmounting screws.NF Narrow frame with 1" (25) face borderand a 3/4" (19) overlap margin. O.A.flange to flange dim. = listed size + 1 1/4"(32). Concealed mounting is optional.• Rigid, heavy gauge extruded frameswith reinforced mitered corners.• Streamlined shaped extruded bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.


• Available in sizes from 4" x 4" to48" x 48" (102 x 102 to 1219 x 1219)in single section construction. Multiplesection assemblies are available.

CONSTRUCTION MATERIAL:• High quality, extruded aluminumconstruction.• Steel or aluminum integral dampers areopposed blade design with screwdriverslot operator.


FASTENING OPTIONS:• Type A Screw Holes (default)

• Type C Concealed Mounting Straps

• Type D Concealed Screw Holes

• Type N None

OPTIONS AND ACCESSORIES:• IS Insect Screen

• PF Plaster Frame

• GK Foam Gasket

• EQT Earthquake Tabs

For additional options and accessories,see page G189.

MODEL 51SH Horizontal Blades


OPTIONALOPPOSED

BLADEDAMPER

LIS

TED

SIZE

- 1/

4" (6

)

2 5/8" (67)

7/8" (22)

LIS

TED

SIZE

+ 1

3/4

" (44

) STD

.



OPTIONALOPPOSED

BLADEDAMPER

LIS

TED

SIZE

- 1/

4" (6

)

2 5/8" (67)

7/8" (22)

LIS

TED

SIZE

+ 1

3/4

" (44

) STD

.


ALUMINUM SINGLE DEFLECTION GRILLES AND REGISTERS• SUPPLY


G16

GRIL

LES

AN

D R

EGIS

TERS

G




Model 61DV

Models:61DV and 61DH• Suffix '-O' adds a steel opposed blade damper

STANDARD FEATURES:• 1 1/4" (32) wide face border with a 1"(25) overlap margin standard, furnishedwith countersunk screw holes andmounting screws. Concealed mountingis optional.

• Rigid, roll-formed frames with reinforcedmitered corners.

• Streamlined shaped roll-formed bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.


• Available in sizes from 4" x 4" to 48" x 36" (102 x 102 to 1219 x 914) in single section construction. Multiplesection assemblies are available.

CONSTRUCTION MATERIAL:• Cost effective, corrosion-resistant steelconstruction.

• Integral dampers - roll-formed steelblades. Opposed blade design withscrewdriver slot operator.





• Type N None



• GK Foam Gasket




LIS

TED

SIZE

+ 1

3/4

" (44

) STD

.


OPTIONALOPPOSED

BLADE DAMPER

LIS

TED

SIZE

- 1/

4" (6

)

3 9/16" (90)

1 13/16" (46) 1 1/4" (32) FACE

BORDER STANDARD

LISTED SIZE + 1 3/4" (44)

OPTIONALOPPOSED

BLADEDAMPER

LIS

TED

SIZE

- 1/

4" (6

)

3 9/16" (90)

1 13/16" (46)

LIS

TED

SIZ

E +

1 3/

4" (4

4)

1 1/4" (32) FACEBORDER

STEEL DOUBLE DEFLECTION GRILLES AND REGISTERS• SUPPLY


G17

GRILLES A

ND

REG

ISTERS

G




Model 61SV

Models:61SV and 61SH• Suffix '-O' adds a steel opposed blade damper

STANDARD FEATURES:• 1 1/4" (32) wide face border with a 1"(25) overlap margin standard, furnishedwith countersunk screw holes andmounting screws. Concealed mountingis optional.

• Rigid, roll-formed frames with reinforcedmitered corners.



• Available in sizes from 4" x 4" to 48" x 36" (102 x 102 to 1219 x 914) in single section construction. Multiplesection assemblies are available.

CONSTRUCTION MATERIAL:• Cost effective, corrosion-resistant steelconstruction.

• Integral dampers - roll-formed steelblades. Opposed blade design withscrewdriver slot operator.





• Type N None



• GK Foam Gasket





OPTIONALOPPOSED

BLADEDAMPER

LIS

TED

SIZE

- 1/

4" (6

)

2 5/8" (67)

7/8" (22)

LIS

TED

SIZ

E +

1 3/

4" (4

4)



OPTIONALOPPOSED

BLADEDAMPER

LIS

TED

SIZE

- 1/

4" (6

)

2 5/8" (67)

7/8" (22)

LIS

TED

SIZ

E +

1 3/

4" (4

4)


STEEL SINGLE DEFLECTION GRILLES AND REGISTERS• SUPPLY


G18

GRIL

LES

AN

D R

EGIS

TERS

G


Stainless steel grilles and registers are well suited for applications involving corrosive environments, high humidity or frequent cleaningwith strong chemicals. Typical projects include hospitals, clean rooms, laboratories, industrial and manufacturing facilities.

The combination of streamlined shaped blades and 3/4" (19) spacing maintains a high effective free area average capacity of 75%,which minimizes outlet velocity, reduces pressure drop and assures quiet operation.


Model 67DV

Models:67DV and 67DH• Suffix '-O' adds a stainless steel


STANDARD FEATURES:• 1 3/8" (35) wide face border with a 1"(25) overlap margin standard, furnishedwith Type A countersunk screw holes andstainless steel mounting screws.

• Rigid, welded and reinforced frameswith hairline mitered corners.



• Available in sizes from 4" x 4" to48" x 48" (102 x 102 to 1219 x 1219).

CONSTRUCTION MATERIAL:• Type 304 Stainless Steel construction.

• Integral dampers - roll-formed stainlesssteel blades. Opposed blade design witha screwdriver operator.

FINISH OPTIONS:• #4 Brushed Satin Polished finish isstandard. AW Appliance White finish isoptional.

OPTIONS AND ACCESSORIES:• Type 316 Stainless Steel Construction

• PFS Stainless Steel Plaster Frame




LIS

TED

SIZ

E +

1 5/

8" (4

1)

1 3/8" (35) FACE BORDER 1 3/4" (44)

3 5/8" (92)

LIS

TED

SIZ

E - 1

/4" (

6)

OPT.O.B.D.


LIS

TED

SIZ

E +

1 5/

8" (4

1)

1 3/8" (35) FACE BORDER 1 3/4" (44)

3 5/8" (92)

LIS

TED

SIZ

E - 1

/4" (

6)

OPT.O.B.D.

STAINLESS STEEL DOUBLE DEFLECTION GRILLES AND REGISTERS• SUPPLY


G19

GRILLES A

ND

REG

ISTERS

G


Model 67SV

Models:67SV and 67SH• Suffix '-O' adds a stainless steel


STANDARD FEATURES:• 1 3/8" (35) wide face border with a 1"(25) overlap margin standard, furnishedwith Type A countersunk screw holes andstainless steel mounting screws.

• Rigid, welded and reinforced frameswith hairline mitered corners.



• Available in sizes from 4" x 4" to60" x 48" (102 x 102 to 1524 x 1219).

CONSTRUCTION MATERIAL:• Type 304 Stainless Steel construction.

• Integral dampers - roll-formed stainlesssteel blades. Opposed blade design witha screwdriver operator.

FINISH OPTIONS:• #4 Brushed Satin Polished finish isstandard. AW Appliance White finish isoptional.

OPTIONS AND ACCESSORIES:• Type 316 Stainless Steel Construction

• PFS Stainless Steel Plaster Frame




LIS

TED

SIZ

E +

1 5/

8" (4

1)

1 3/8" (35) FACE BORDER

LIS

TED

SIZ

E - 1

/4" (

6)

1 1/8" (29)

OPT.O.B.D.

2 7/8"(73)


LIS

TED

SIZ

E +

1 5/

8" (4

1)

1 3/8" (35) FACE BORDER

LIS

TED

SIZ

E - 1

/4" (

6)

1 1/8" (29)

OPT.O.B.D.

2 7/8"(73)


Stainless steel grilles and registers are well suited for applications involving corrosive environments, high humidity or frequent cleaningwith strong chemicals. Typical projects include hospitals, clean rooms, laboratories, industrial and manufacturing facilities.

The combination of streamlined shaped blades and 3/4" (19) spacing maintains a high effective free area average capacity of 75%,which minimizes outlet velocity, reduces pressure drop and assures quiet operation.

STAINLESS STEEL SINGLE DEFLECTION GRILLES AND REGISTERS• SUPPLY


G20

GRIL

LES

AN

D R

EGIS

TERS

G

PERFORMANCE NOTES FOR SUPPLY GRILLES AND REGISTERS:

MODEL SERIES: 5100, 6100 AND 6700

Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, therelationship of horizontal spread to throw for three standardvertical blade deflections and represent a typical high side wallsupply outlet. The isovels (throw values) are for the catalogedterminal velocities of 150, 100 and 50 fpm. Cataloged data, in accordance with the test code, is with the grillemounted 9" (229) below the ceiling and benefiting from the ceilingcoanda effect under isothermal conditions. Throw values withoutceiling effect (greater than 24" (610) from a surface parallel to theairflow) may be approximated by multiplying the cataloged throwby x 0.7. In order to offset potential draft problems caused by prematuredrop, it is recommended to set the blades with an upwarddeflection setting of 15 – 20° in free space conditions. The angleof spread and temperature differential between the supply air androom air ( T) also effects the drop of the airstream.

Under constant conditions of temperature, volume and corevelocity, the wider the spread, the smaller the drop. Typical coldsupply air (20°F T) reduces horizontal throw by approximately30%. Warm air will increase throw by approximately 30% andreduce drop. For a full explanation of the effects of spread, throw, temperatureand drop, refer to the engineering guide at the back of the catalog.

SPREAD CHARACTERISTICS WITH THREE DEFLECTIONSETTINGS

NC Corrections for Throttling Damper (add)

Blade Deflection 0° 22 1/2° 45°

Double Deflection Factor x .80 x .83 x .89

Single Deflection Factor x .73 x .76 x .85

TP Correction Factors for Grilles Without Damper(multiply)

ModelType

DamperBlade Deflection

0° 22 1/2° 45°

DoubleDeflection

With 0 + 2 + 7

Without – 4 – 2 + 3

SingleDeflection

With – 4 – 1 + 4

Without – 8 – 6 + 1

NC Corrections for Blade Deflection (add)

Additional Pressure Drop(in. w.g.)

.05" .15" .25"

Approx. Damper Opening 75% 67% 50%

NC add + 6 + 11 + 18

5

10

0

5

100 5 10 15 20 25 35 40 45 50 55 6030

5

10

0

5

100 5 10 15 20 25 35 40 45 5030

0 5 10 15 20 25 30

10

5

0

5

10

15

20

15

20

Throw (ft.)

Throw (ft.)

Throw (ft.)

Sp

read

(ft

.)S

pre

ad (

ft.)

Sp

read

(ft

.)

22 1/2 Deflection

0 Deflection

45 Deflection

Vt = 50 fpm

Vt = 100 fpmVt = 150 fpm

Vt = 50 fpm

Vt = 100 fpmVt = 150 fpm

Vt = 50 fpm

Vt = 100 fpm

Vt = 150 fpm

Note: Damper corrections are for wide open damper.


G21

GRILLES A

ND

REG

ISTERS

G

PERFORMANCE DATA: SUPPLY GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES

MODELS: 51DV, 51DH, 51SV, 51SH, 61DV, 61DH, 61SV, 61SH, 67DV, 67DH, 67SV, 67SH

ListedDuct Size(inches)

AlternateSizes

(inches)

CoreArea

(sq. ft.)

AkFactor

CoreVP

300.006

400.010

500.016

600.022

700.031

800.040

1000.062

1200.090

1400.122

TP0°22 1/2°45°

.015

.017

.026

.026

.030

.046

.041

.047

.072

.059

.068

.103

.081

.093

.142

.106

.122

.186

.165

.190

.289

.238

.274

.417

.324

.373

.567

6 x 6 8 x 410 x 4 0.20

CFMNC

60–

80–

100–

12014

14019

16023

20029

24035

28040

.14

.12

.10T

0°22 1/2°45°

5-7-134-6-103-4-7

7-9-166-7-134-5-8

8-12-186-10-14

4-6-9

10-14-208-11-165-7-10

11-15-219-12-176-8-11

12-16-2310-13-18

6-8-12

15-18-2512-14-20

8-9-13

16-20-2713-16-228-10-14

17-21-3014-17-249-11-15

8 x 6 10 x 512 x 4 0.27

CFMNC

81–

108–

135–

16215

18920

21624

27030

32436

37841

.18

.16

.14T

0°22 1/2°45°

5-8-154-6-123-4-8

8-12-186-10-14

4-6-9

10-14-208-11-165-7-10

11-16-239-13-186-8-12

13-18-2510-14-20

7-9-13

15-19-2712-15-228-10-14

17-21-3014-17-249-11-15

18-23-3214-18-269-12-16

19-24-3515-19-2810-12-18

10 x 6 12 x 516 x 4 0.35

CFMNC

105–

140–

17511

21016

24521

28025

35031

42037

49042

.24

.21

.18T

0°22 1/2°45°

6-9-185-7-143-5-9

9-13-217-10-175-7-11

10-16-248-13-195-8-12

12-19-2610-15-216-10-13

15-20-2812-16-228-10-14

17-21-3014-17-249-11-15

20-23-3316-18-2610-12-17

21-25-3617-20-2911-13-18

22-27-3918-22-3111-14-20

8 x 8 14 x 5 0.38

CFMNC

114–

152–

19012

22817

26622

30426

38032

45638

53243

.26

.22

.20T

0°22 1/2°45°

6-9-195-7-153-5-10

9-14-227-11-185-7-11

11-16-259-13-206-8-13

13-19-2710-15-227-10-14

16-21-2913-17-238-11-15

18-22-3214-18-269-11-16

19-24-3415-19-2710-12-17

21-26-3717-21-3011-13-19

23-28-4018-22-3212-14-20

12 x 6 18 x 4 0.42

CFMNC

126–

168–

21012

25217

29422

33626

42032

50438

58843

.29

.25

.22T

0°22 1/2°45°

6-9-195-7-153-5-10

9-14-227-11-185-7-11

11-16-259-13-206-8-13

13-19-2710-15-227-10-14

16-21-3013-17-248-11-15

18-22-3214-18-269-11-16

19-24-3415-19-2710-12-17

21-28-3817-22-3011-14-19

23-29-4118-23-3312-15-21

14 x 6 10 x 8 0.50

CFMNC

150–

200–

25013

30018

35023

40027

50033

60039

70044

.34

.30

.26T

0°22 1/2°45°

6-11-205-9-163-6-10

10-15-238-12-185-8-12

12-18-2510-14-20

6-9-13

15-20-2812-16-228-10-14

16-22-3113-18-258-11-16

19-23-3315-18-2610-12-17

21-25-3617-20-2911-13-18

23-28-4018-22-3212-14-20

25-31-4320-25-3413-16-22

12 x 8 16 x 624 x 4 0.58

CFMNC

174–

232–

29014

34819

40624

46428

58034

69640

81245

.39

.34

.30T

0°22 1/2°45°

7-11-216-9-174-6-11

10-15-248-12-195-8-12

12-19-2710-15-226-10-14

15-21-3012-17-248-11-15

17-23-3214-18-269-12-16

20-24-3416-19-2710-12-17

22-27-3818-22-3011-14-19

24-30-4219-24-3412-15-21

26-32-4521-26-3613-16-23

10 x 10 14 x 726 x 4 0.61

CFMNC

183–

244–

30514

36619

42724

48828

61034

73240

85445

.41

.36

.31T

0°22 1/2°45°

7-11-216-9-174-6-11

10-16-248-13-195-8-12

13-19-2810-15-227-10-14

16-21-3013-17-248-11-15

17-23-3214-18-269-12-16

20-24-3516-19-2810-12-18

23-28-3918-22-3112-14-20

24-30-4219-24-3412-15-22

27-32-4622-26-3714-16-23

18 x 614 x 828 x 430 x 4

0.65

CFMNC

195–

260–

32515

39020

45525

52029

65035

78041

91046

.44

.38

.33T

0°22 1/2°45°

7-12-226-10-184-6-11

11-16-259-13-206-8-13

13-20-2910-16-237-10-15

16-22-3213-18-268-11-16

18-24-3414-19-279-12-17

21-25-3617-20-2911-13-18

24-29-4019-23-3212-15-20

25-32-4520-26-3613-16-23

28-34-4822-27-3814-17-24

12 x 10 20 x 624 x 5 0.74

CFMNC

222–

296–

37015

44420

51825

59229

74035

88841

103646

.50

.44

.38T

0°22 1/2°45°

8-13-246-10-194-7-12

11-17-279-14-226-9-14

14-21-3111-17-257-11-16

17-24-3314-19-269-12-17

20-26-3616-21-2910-13-18

22-27-3918-22-3111-14-20

25-31-4320-25-3413-16-22

27-33-4822-26-3814-17-24

30-36-5124-29-4115-18-26

22 x 616 x 828 x 536 x 4

0.80

CFMNC

240–

320–

40016

48021

56026

64030

80036

96042

112047

.54

.47

.41T

0°22 1/2°45°

8-13-256-10-204-7-13

11-18-289-14-226-9-14

15-22-3212-18-268-11-16

18-25-3514-20-289-13-18

20-27-3816-22-3010-14-19

23-28-4118-22-3312-14-21

26-32-4521-26-3613-16-23

28-35-5022-28-4014-18-25

31-38-5325-30-4216-19-27

12 x 12

14 x 1018 x 824 x 638 x 4

0.90

CFMNC

270–

360–

45016

54021

63026

72030

90036

108042

126047

.61

.53

.46T

0°22 1/2°45°

9-14-267-11-215-7-13

12-18-2910-14-23

6-9-15

15-23-3312-18-268-12-17

18-26-3614-21-299-13-18

21-27-3917-22-3111-14-20

24-29-4219-23-3412-15-21

27-33-4722-26-3814-17-24

29-36-5123-29-4115-18-26

32-39-5626-31-4516-20-28

18 x 10 30 x 6 1.13

CFMNC

339–

45210

56517

67822

79127

90431

113037

135643

158248

.77

.67

.58T

0°22 1/2°45°

9-15-297-12-235-8-15

14-20-3311-16-267-10-17

17-25-3614-20-299-13-18

20-29-4016-23-3210-15-20

24-30-4319-24-3412-15-22

27-33-4622-26-3714-17-23

30-36-5124-29-4115-18-26

33-40-5726-32-4617-20-29

35-43-6128-34-4918-22-31

For performance data notes, see G24.


G22

GRIL

LES

AN

D R

EGIS

TERS

G




AlternateSizes

(inches)

CoreArea

(sq. ft.)

AkFactor

CoreVP

300.006

400.010

500.016

600.022

700.031

800.040

1000.062

1200.090

1400.122

TP0°22 1/2°45°

.015

.017

.026

.026

.030

.046

.041

.047

.072

.059

.068

.103

.081

.093

.142

.106

.122

.186

.165

.190

.289

.238

.274

.417

.324

.373

.567

14 x 14

16 x 1220 x 1024 x 834 x 6

1.24

CFMNC

372–

49610

62017

74422

86827

99231

124037

148843

173648

.84

.73

.64T

0°22 1/2°45°

11-18-339-14-266-9-17

16-25-3913-20-318-13-20

20-29-4216-23-3410-15-21

24-33-4719-26-3812-17-24

27-36-5122-29-4114-18-26

31-39-5425-31-4316-20-27

35-42-6028-34-4818-21-30

39-47-6631-38-5320-24-33

41-51-7133-41-5721-26-36

18 x 12

16 x 1422 x 1028 x 838 x 6

1.37

CFMNC

411–

54811

68518

82223

95928

109632

137038

164444

191849

.93

.81

.71T

0°22 1/2°45°

11-18-339-14-266-9-17

16-25-3913-20-318-13-20

20-30-4316-24-3410-15-22

24-33-4719-26-3812-17-24

28-36-5122-29-4114-18-26

32-39-5426-31-4316-20-27

35-43-6128-34-4918-22-31

39-47-6731-38-5420-24-34

41-51-7233-41-5821-26-36

24 x 10 20 x 1230 x 8 1.52

CFMNC

456–

60811

76018

91223

106428

121632

152038

182444

212849

1.03.90.78

T0°22 1/2°45°

12-19-3510-15-286-10-18

16-25-4113-20-338-13-21

21-32-4517-26-3611-16-23

25-35-5020-28-4013-18-25

29-38-5323-30-4215-19-27

34-41-5727-33-4617-21-29

37-45-6530-36-5119-23-32

41-50-7033-40-5621-25-35

43-53-7634-42-6122-27-38

16 x 1618 x 1422 x 1230 x 8

1.64

CFMNC

492–

65611

82018

98423

114828

131232

164038

196844

229649

1.12.97.84

T0°22 1/2°45°

12-20-3710-16-306-10-19

17-26-4214-21-349-13-21

22-32-4718-26-3811-16-24

26-37-5121-30-4113-19-26

31-40-5625-32-4516-20-28

35-42-5928-34-4718-21-30

39-47-6731-38-5420-24-34

42-51-7334-41-5821-26-37

46-56-7937-45-6323-28-40

24 x 12

18 x 1620 x 1430 x 1036 x 8

1.85

CFMNC

555–

74012

92519

111024

129529

148033

185039

222045

259050

1.261.09.95

T0°22 1/2°45°

12-20-3810-16-306-10-19

18-27-4414-22-359-14-22

22-33-4818-26-3811-17-24

27-38-5422-30-4314-19-27

32-40-5826-32-4616-20-29

36-44-6229-35-5018-22-31

40-48-6932-38-5520-24-35

44-54-7635-43-6122-27-38

48-58-8238-46-6624-29-41

18 x 18

20 x 1624 x 1428 x 1232 x 10

2.10

CFMNC

630–

84012

105019

126024

147029

168033

210039

252045

294050

1.431.241.08

T0°22 1/2°45°

13-21-4010-17-327-11-20

19-29-4715-23-3810-15-24

24-36-5219-29-4212-18-26

29-40-5723-32-4615-20-29

33-43-6226-34-5017-22-31

38-47-6630-38-5319-24-33

42-52-7434-42-5921-26-37

47-57-8138-46-6524-29-41

50-62-8740-50-7025-31-44

30 x 12

20 x 1822 x 1626 x 1436 x 10

2.32

CFMNC

696–

92813

116020

139225

162430

185634

232040

278446

324851

1.581.371.19

T0°22 1/2°45°

14-23-4311-18-347-12-22

21-31-5017-25-4011-16-25

26-39-5621-31-4513-20-28

31-43-6125-34-4916-22-31

36-47-6729-38-5418-24-34

41-50-7133-40-5721-25-36

46-56-7932-45-6323-28-40

50-61-8640-49-6925-31-43

54-67-9443-54-7527-34-47

24 x 16 32 x 12 2.50

CFMNC

750–

100013

125020

150025

175030

200034

250040

300046

350051

1.701.481.29

T0°22 1/2°45°

14-24-4511-19-367-12-23

22-32-5218-26-4211-16-26

27-40-5822-32-4614-20-29

32-45-6426-36-5116-23-32

37-49-6830-39-5419-25-34

43-52-7434-42-5922-26-37

48-58-8238-46-6624-29-41

52-64-9042-51-7226-32-45

56-68-9745-54-7828-34-49

20 x 20 22 x 18 2.61

CFMNC

783–

104413

130520

156625

182730

208834

261040

313246

365451

1.771.541.34

T0°22 1/2°45°

15-24-4612-19-378-12-23

22-32-5318-26-4211-16-27

27-41-5922-33-4714-21-30

32-46-6526-37-5216-23-33

38-50-7030-40-5619-25-35

44-53-7535-42-6022-27-38

49-59-8439-47-6725-30-42

53-65-9242-52-7427-33-46

58-70-9946-56-7929-35-50

36 x 12

22 x 2024 x 1826 x 1630 x 14

2.79

CFMNC

837–

111613

139520

167425

195330

223234

279040

334846

390651

1.901.651.44

T0°22 1/2°45°

15-25-4812-20-388-13-24

23-34-5518-27-4412-17-28

28-42-6122-34-4914-21-31

34-48-6827-38-5417-24-34

40-51-7332-41-5820-26-37

45-55-7736-44-6223-28-39

50-61-8640-49-6925-31-43

55-68-9544-54-7628-34-48

59-73-10347-58-8230-37-52

22 x 22

24 x 2026 x 1830 x 1640 x 12

3.17

CFMNC

951–

126814

158521

190226

221931

253635

317041

380447

443852

2.161.871.63

T0°22 1/2°45°

17-27-5014-22-409-14-25

24-36-5819-29-4612-18-29

29-45-6523-36-5215-23-33

36-50-7129-40-5718-25-36

42-54-7734-43-6221-27-39

47-58-8238-46-6624-29-41

53-65-9242-52-7427-33-46

58-71-10146-57-8129-36-51

62-77-10950-62-8731-39-55

42 x 12 36 x 14 3.27

CFMNC

981–

130814

163521

196226

228931

261635

327041

392447

457852

2.221.931.68

T0°22 1/2°45°

17-27-5114-22-419-14-26

24-36-5919-29-4712-18-30

30-45-6624-36-5315-23-33

36-51-7229-41-5818-26-36

42-55-7734-44-6221-28-39

48-59-8338-47-6624-30-42

53-66-9342-53-7427-33-47

59-72-10147-58-8130-36-51

63-77-10950-62-8732-39-55

30 x 1824 x 2234 x 1640 x 14

3.54

CFMNC

1062–

141614

177021

212426

247831

283235

354041

424847

495652

2.412.091.82

T0°22 1/2°45°

18-28-5314-22-429-14-27

25-37-6120-30-4913-19-31

31-47-6925-38-5516-24-35

37-53-7530-42-6019-27-38

44-57-8135-46-6522-29-41

50-61-8640-49-6925-31-43

56-69-9745-55-7828-35-49

61-75-10649-60-8531-38-53

66-81-11553-65-9233-41-58



G23

GRILLES A

ND

REG

ISTERS

G




AlternateSizes

(inches)

CoreArea

(sq. ft.)

AkFactor

CoreVP

300.006

400.010

500.016

600.022

700.031

800.040

1000.062

1200.090

1400.122

TP0°22 1/2°45°

.015

.017

.026

.026

.030

.046

.041

.047

.072

.059

.068

.103

.081

.093

.142

.106

.122

.186

.165

.190

.289

.238

.274

.417

.324

.373

.567

24 x 24

26 x 2228 x 2032 x 1836 x 16

3.79

CFMNC

1137–

151614

189521

227426

265331

303235

379041

454847

530652

2.582.241.95

T0°22 1/2°45°

18-29-5514-23-449-15-28

29-36-6221-31-5013-20-31

33-48-7026-38-5617-24-35

39-55-7731-44-6220-28-39

45-59-8336-47-6623-30-42

51-62-8941-50-7126-31-45

57-70-9946-56-7929-35-50

62-77-10850-62-8631-39-54

68-83-11754-66-9434-42-59

36 x 1832 x 2040 x 1646 x 14

4.29

CFMNC

1287–

171615

214522

257427

300332

343236

429042

514848

600653

T0°22 1/2°45°

19-31-5815-25-4610-16-29

28-42-6822-34-5414-21-34

35-52-7528-42-6018-26-38

2-58-8334-46-6621-29-42

48-63-8938-50-7124-32-45

55-68-9544-54-7628-34-48

61-75-10649-60-8531-38-53

68-83-11754-66-9434-42-59

73-89-12558-71-10037-45-63

26 x 26 28 x 2448 x 14 4.47

CFMNC

1341–

178815

223522

268227

312932

357636

447042

536448

625853

3.042.642.30

T0°22 1/2°45°

19-32-5915-26-4710-16-30

28-43-6922-34-5514-22-35

35-53-7728-42-6218-27-32

43-59-8534-47-6822-30-43

49-65-9139-52-7325-33-46

56-69-9845-55-7828-35-49

63-77-10950-62-8732-39-55

69-85-12055-68-9635-43-60

75-91-12960-73-10338-46-65

30 x 2432 x 2236 x 2040 x 18

4.77

CFMNC

1431–

190815

238522

286227

333932

381636

477042

572448

667853

3.242.812.46

T0°22 1/2°45°

20-33-6116-26-4910-17-31

29-44-7123-35-5715-22-36

36-54-7929-43-6318-27-40

44-61-8735-49-7022-31-44

51-67-9441-54-7526-34-47

58-71-10146-57-8129-36-51

65-79-11252-63-9033-40-56

71-87-12357-70-9836-44-62

77-94-13362-75-10639-47-67

42 x 18 28 x 26 4.99

CFMNC

1497–

199716

249523

299428

349333

399237

499043

598849

698654

3.392.942.57

T0°22 1/2°45°

20-33-6216-26-5010-17-31

30-44-7224-35-5815-22-36

37-55-8030-44-6419-28-40

44-62-8835-50-7022-31-44

52-67-9542-54-7626-34-48

59-72-10247-58-8230-36-51

66-80-11453-64-9133-40-57

72-88-12558-70-10036-44-63

77-95-13562-76-10839-48-68

28 x 2830 x 2636 x 2240 x 20

5.20

CFMNC

1560–

208016

260023

312028

364033

416037

520043

624049

728054

3.543.072.68

T0°22 1/2°45°

21-34-6317-27-5011-17-32

30-45-7424-36-5915-23-37

38-56-8230-45-6619-28-41

45-63-9036-50-7223-32-45

53-69-9742-55-7827-35-49

60-74-10448-59-8330-37-52

67-82-11654-66-9334-41-58

74-90-12859-72-10237-45-64

79-97-13763-78-11040-49-69

42 x 20 30 x 28 5.57

CFMNC

1671–

222816

278523

334228

389933

445637

557043

668449

779854

3.793.292.87

T0°22 1/2°45°

22-35-6618-28-5311-18-33

31-47-7625-38-6116-24-38

39-58-8431-46-6720-29-42

47-66-9338-53-7424-33-47

55-71-10044-57-8028-36-50

62-76-10750-61-8631-38-54

70-84-12056-67-9635-42-60

76-93-13161-74-10538-47-66

82-100-14266-80-11441-50-71

36 x 24 40 x 2244 x 20 5.74

CFMNC

1722–

229616

287023

344428

401833

459237

574043

688849

803654

3.903.392.96

T0°22 1/2°45°

23-36-6818-29-5412-18-34

32-49-7826-39-6216-25-39

41-60-8833-48-7021-30-44

49-68-9639-54-7725-34-48

57-74-10446-59-8329-37-52

64-78-11251-62-9032-39-56

72-88-12458-70-9936-44-62

78-96-13762-77-11039-48-69

85-104-14868-83-11843-52-74

30 x 3034 x 2638 x 2448 x 20

5.99

CFMNC

1797–

239616

299523

359428

419333

479237

599043

718849

838654

4.073.533.08

T0°22 1/2°45°

23-36-6918-29-5512-18-35

33-49-8026-39-6417-25-40

41-61-8933-49-7121-31-45

49-69-9839-55-7825-35-49

57-75-10646-60-8529-38-53

65-80-11352-64-9033-40-57

73-89-12658-71-10137-45-63

80-98-13864-78-11040-49-69

86-106-15069-85-12043-53-75

42 x 2436 x 2842 x 2446 x 22

6.72

CFMNC

2016–

268817

336024

403229

470434

537638

672044

806450

940855

4.573.963.46

T0°22 1/2°45°

24-39-7219-31-5812-20-36

34-51-8427-41-6717-26-42

43-64-9334-51-7422-32-47

51-72-10241-58-8226-36-51

60-78-11148-62-8930-39-56

68-84-11854-67-9434-42-59

77-93-13262-74-10639-47-66

84-102-14467-82-11542-51-72

90-111-15772-89-12645-56-79

32 x 32 40 x 26 6.84

CFMNC

2052–

273617

342024

410429

478834

547238

684044

820850

957655

4.654.043.52

T0°22 1/2°45°

24-39-7319-31-5812-20-37

34-52-8427-42-6717-26-42

43-65-9434-52-7522-33-47

52-73-10342-58-8226-37-52

61-79-11249-63-9031-40-56

69-84-11955-67-9535-42-60

77-94-13362-75-10639-47-67

84-103-14667-82-11742-52-73

91-112-15873-90-126

46-56-79

36 x 30 38 x 28 7.22

CFMNC

2166–

288817

361024

433229

505434

577638

722044

866450

1010855

4.914.263.72

T0°22 1/2°45°

25-40-7620-32-6113-20-38

36-54-8729-43-7018-27-44

45-68-9836-54-7823-34-49

54-76-10843-61-8627-38-54

63-82-11650-66-9332-41-58

71-87-12457-70-9936-44-62

80-98-13964-78-11140-49-70

87-108-15170-86-12144-54-76

94-116-16475-93-13147-58-82

48 x 24

34 x 3436 x 3238 x 3042 x 28

7.69

CFMNC

2307–

307618

384525

461430

538335

615239

769045

922851

1076656

5.234.543.96

T0°22 1/2°45°

26-41-7721-33-6213-22-39

37-55-9030-44-7219-28-45

46-69-10037-55-8023-45-50

55-77-10944-62-8728-39-55

64-84-11851-67-9432-42-59

73-90-12758-72-10237-45-64

82-100-14266-80-11441-50-71

90-109-15572-87-12445-55-78

97-118-16778-94-13449-59-84



G24

GRIL

LES

AN

D R

EGIS

TERS

G




AlternateSizes

(inches)

CoreArea

(sq. ft.)

AkFactor

CoreVP

300.006

400.010

500.016

600.022

700.031

800.040

1000.062

1200.090

1400.122

TP0°22 1/2°45°

.015

.017

.026

.026

.030

.046

.041

.047

.072

.059

.068

.103

.081

.093

.142

.106

.122

.186

.165

.190

.289

.238

.274

.417

.324

.373

.567

36 x 3438 x 3240 x 3048 x 26

8.20

CFMNC

2460–

328018

410025

492030

574035

656039

820045

984051

1148056

5.584.844.22

T0°22 1/2°45°

26-42-7921-34-6313-21-40

37-57-9130-46-73

19-29-

47-70-10238-56-8224-35-51

57-79-11146-63-8929-40-56

65-85-12152-68-9733-43-61

75-91-12960-73-10338-46-65

84-102-14467-82-11542-51-72

91-111-15873-89-12646-56-79

98-121-17178-97-13749-61-86

36 x 3638 x 3442 x 3046 x 28

8.69

CFMNC

2607–

347618

434525

521430

608335

695239

869045

1042851

1216656

5.915.134.48

T0°22 1/2°45°

28-45-8422-36-6714-23-42

36-60-9631-48-7720-30-48

49-74-10839-59-8625-37-54

60-84-11748-67-9430-42-59

69-90-12755-72-10235-45-64

78-96-13662-77-10939-48-68

88-108-15270-86-12244-54-76

96-117-16677-94-13348-59-83

104-127-18083-102-14452-64-90

38 x 38 42 x 34 9.70

CFMNC

291010

388019

485026

582031

679036

776040

970046

1164052

1358057

6.605.725.00

T0°22 1/2°45°

28-47-8822-38-7014-24-44

42-62-10134-50-8121-31-51

53-78-11442-62-9127-39-57

62-88-12550-70-10031-44-63

73-95-13458-76-10737-48-67

83-101-14366-81-11442-51-72

93-114-16174-91-12947-57-81

101-125-17681-100-141

51-63-88

109-134-19087-107-15255-67-95

42 x 36 44 x 3448 x 30 10.16

CFMNC

304810

406419

508026

609631

711236

812840

1016046

1219252

1422457

6.915.995.23

T0°22 1/2°45°

29-48-9023-38-7215-24-45

43-64-10434-51-8322-32-52

53-80-11742-64-9427-40-59

64-90-12751-72-10232-45-64

75-97-13860-78-11038-49-69

85-104-14768-83-11843-52-74

95-117-16576-94-13248-59-83

104-127-18083-102-144

52-64-90

112-138-19590-110-15656-69-98

40 x 4042 x 3846 x 3448 x 32

10.77

CFMNC

323110

430819

538526

646231

753936

861640

1077046

1292452

1507857

7.326.355.55

T0°22 1/2°45°

31-50-9425-40-7516-25-47

44-67-10835-54-8622-34-54

56-84-12145-67-9728-42-61

67-94-13254-75-10634-47-66

77-102-14362-82-11439-51-72

88-108-15370-86-12244-54-77

99-121-17179-97-13750-61-86

108-132-18786-106-150

54-66-94

117-143-20394-114-16259-72-102

42 x 4244 x 4046 x 3848 x 36

11.89

CFMNC

356711

475620

594527

713432

832337

951241

1189047

1426853

1664658

8.097.026.12

T0°22 1/2°45°

32-52-9726-42-7816-26-49

46-69-11237-55-9023-35-56

58-86-12546-69-10029-43-63

69-97-13855-78-11035-49-69

81-105-14965-84-11941-53-75

92-112-15974-90-12746-56-80

102-125-17882-100-142

51-63-89

112-138-19590-110-156

56-69-98

122-145-21098-119-16861-75-105

44 x 44 46 x 42 13.07

CFMNC

392111

522820

653527

784232

914937

1045641

1307047

1568453

1829858

8.897.716.73

T0°22 1/2°45°

34-55-10427-44-8317-28-52

49-74-12039-59-9625-37-60

61-92-13349-74-10631-46-67

74-104-14659-83-11737-52-73

86-112-15869-90-12643-56-79

97-120-16878-96-13449-60-84

109-133-18987-106-151

55-67-95

120-146-20796-117-16660-73-104

129-158-223103-126-17865-79-112

46 x 46 14.30

CFMNC

429011

572020

715027

858032

1001037

1144041

1430047

1716053

2002058

9.728.447.36

T0°22 1/2°45°

35-57-10728-46-8618-29-54

51-76-12441-61-9926-38-62

63-95-13850-76-11032-48-69

76-107-15161-86-12138-54-76

89-116-16371-93-13045-58-82

101-124-17481-99-13951-62-87

113-138-19590-110-156

57-69-98

124-151-21499-121-17162-76-107

134-163-231107-130-18562-82-116

48 x 48 15.59

CFMNC

467712

623621

779528

935433

1091338

1247242

1559048

1870854

2182659

10.609.208.03

T0°22 1/2°45°

37-60-11330-48-9019-30-57

53-80-13142-64-10527-40-66

67-100-14654-80-11734-50-73

80-113-15964-90-12740-57-80

94-122-17375-98-13847-61-87

106-131-18585-105-148

53-66-93

119-146-20695-117-16560-73-103

131-159-226105-127-181

62-80-113

140-173-244112-138-19570-87-122

CFM - cubic feet per minuteTP - total pressure - inches w.g.VP - velocity pressure - inches w.g.T - throw in feetNC - Noise Criteria (values) based on

10 dB room absorption, re 10-12

watts @ 0° deflection.Core velocity is in feet per minute.

Performance Notes:1. Performance data is based on doubledeflection grille with opposed bladedamper (register).2. 0°, 22 1/2° and 45° represent verticalblade deflection angles and horizontalspread.3. Throw values are given for terminalvelocities of 150, 100 and 50 fpm underisothermal conditions.

4. Additional performance notes andcorrection factors for various models andsettings may be found on page G20.5. Data derived from tests conducted inaccordance with ANSI/ASHRAE Standard70 – 2006.


G25

GRILLES A

ND

REG

ISTERS

G

HOW TO ORDER OR TO SPECIFY

SUGGESTED SPECIFICATION:

51DV, 51DH Double DeflectionFurnish and install Nailor Model (select one) 51DV or 51DH Double Deflection Supply Grilles of the type and size as shown onthe plans and air distribution schedules. The grilles shall have a dual set of extruded aluminum adjustable blades that are streamlinedshaped and spaced on 3/4" (19) centers. The frame is to be constructed from heavy gauge extruded aluminum and have reinforcedmitered corners. The finish shall be AW Appliance White (optional finishes are available).

(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel (aluminum is optional) and operable fromthe face of the grille, shall be provided with all units.

The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with ANSI/ASHRAEStandard 70 – 2006.

51SV, 51SH Single DeflectionFurnish and install Nailor Model (select one) 51SV or 51SH Single Deflection Supply Grilles of the type and size as shown onthe plans and air distribution schedules. The grilles shall have a single set of extruded aluminum adjustable blades that arestreamlined shaped and spaced on 3/4" (19) centers. The frame is to be constructed from heavy gauge extruded aluminum andhave reinforced mitered corners. The finish shall be AW Appliance White (optional finishes are available).

(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel (aluminum is optional) and operable fromthe face of the grille, shall be provided with all units.


MODEL SERIES: 5100

ALUMINUM SUPPLY GRILLES AND REGISTERS

EXAMPLE: 51DV - O - 24 x 12 - S - AW - DMI - A - —

1. Models

Double Deflection:

51DV Vertical Front Blades

51DH Horizontal Front Blades

Single Deflection:

51SV Vertical Blades

51SH Horizontal Blades

2. Damper (OBD)

(model suffix)

O Steel

OA Aluminum

— None

3. Nominal Width x Height

inches (mm)

4. Frame/Border Type

S Surface Mount

Border 1 1/4" (32) (default)

NF Narrow Frame

Border 1" (25)

5. FinishAW Appliance White (default)

AL Aluminum

BK Black

BW British White

LBP Light Bronze Paint

MBP Medium Bronze Paint

DBP Dark Bronze Paint

MI Mill

PC Prime Coat

SA Satin Anodized (clear)

SP Special Custom Color

6. Opposed Blade Damper Finish

DMI Mill (default)

DBK Painted Black

7. Fastening

A Screw Holes (default)

C Concealed Mounting Straps

D Concealed Screw Holes in Neck

N None

OPTIONS & ACCESSORIES: — None (default)

8. Insect Screen

IS Insect Screen

9. Plaster Sub-Frame

PF Plaster Sub-Frame

10. Gaskets

GK Foam Gasket

11. Earthquake Tabs

EQT Earthquake Tabs

Notes:

1. For a standard grille with no specialrequirements, specification is only requiredas far as the damper selection.

The "default" will automatically select"standard". For example, an aluminumdouble deflection register, front bladesvertical and steel damper, is Model 51DV-O.Unit will be supplied with screw holes andAW Appliance White finish.

2. Nailor recommends the selection ofvertical front blades on supply models forthe majority of commercial applications.

3. The larger dimension must alwaysbe specified first; for example 24" x 12" (610 x 305), not 12" x 24" (305 x 610).

MODEL SERIES: 5100

ALUMINUM SUPPLY GRILLES AND REGISTERS


G26

GRIL

LES

AN

D R

EGIS

TERS

GSUGGESTED SPECIFICATION:

61DV, 61DH Double DeflectionFurnish and install Nailor Model (select one) 61DV or 61DH Double Deflection Supply Grilles of the type and size as shown onthe plans and air distribution schedules. The grilles shall have a dual set of streamlined shaped, roll-formed, corrosion-resistant steelblades that are adjustable, and spaced on 3/4" (19) centers. The frame is to be constructed from roll-formed, corrosion-resistantsteel and have reinforced mitered corners. The finish shall be AW Appliance White (optional finishes are available).

(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel and operable from the face of the grille,shall be provided with all units.


61SV, 61SH Single DeflectionFurnish and install Nailor Model (select one) 61SV or 61SH Single Deflection Supply Grilles of the type and size as shown onthe plans and air distribution schedules. The grilles shall have a single set of streamlined shaped, roll-formed, corrosion-resistantsteel blades that are adjustable, and spaced on 3/4" (19) centers. The frame is to be constructed from roll-formed, corrosion-resistantsteel and have reinforced mitered corners. The finish shall be AW Appliance White (optional finishes are available).

(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel and operable from the face of the grille,shall be provided with all units.


MODEL SERIES: 6100

STEEL SUPPLY GRILLES AND REGISTERS

MODEL SERIES: 6100

STEEL SUPPLY GRILLES AND REGISTERS

EXAMPLE: 61DV - O - 24 x 12 - S - AW - DMI - A - —

1. Models

Double Deflection:



Single Deflection:



2. Damper (OBD)

(model suffix)

O Steel

— None


inches (mm)


S Surface Mount Border 1 1/4" (32) (default)

5. Finish

AW Appliance White (default)

AL Aluminum

BK Black

BW British White

LBP Light Bronze Paint

MBP Medium Bronze Paint

DBP Dark Bronze Paint

MI Mill

PC Prime Coat

SP Special Custom Color

6. Opposed Blade Damper Finish

DMI Mill (default)

DBK Painted Black

7. Fastening


C Concealed Mounting Straps

D Concealed Screw Holes in Neck

N None

OPTIONS & ACCESSORIES: — None (default)

8. Insect Screen IS Insect Screen

9. Plaster Sub-Frame PF Plaster Sub-Frame

10. Gaskets

GK Foam Gasket

11. Earthquake Tabs

EQT Earthquake Tabs

Notes:


The "default" will automatically select"standard". For example, a steel doubledeflection register, front blades vertical andsteel damper, is Model 61DV-O. Unit will be supplied with screw holes and AWAppliance White finish.


3. The larger dimension must alwaysbe specified first; for example 24" x 12"(610 x 305), not 12" x 24" (305 x 610).



G27

GRILLES A

ND

REG

ISTERS

G

MODEL SERIES: 6700

STAINLESS STEEL SUPPLY GRILLES AND REGISTERS

EXAMPLE: 67DV - O - 24 x 12 - S - #4 - A - 304 - PFS

1. Models

Double Deflection:



Single Deflection:



2. Damper (OBD)

(model suffix)

— None

O Stainless Steel


inches (mm)


S Surface Mount

Border 1 3/8" (35) (default)

5. Finish

#4 Brushed Satin Polished

(default)

AW Appliance White

6. Fastening


N None

OPTIONS & ACCESSORIES:

7. Construction

304 Type 304 Stainless Steel

(default)

316 Type 316 Stainless Steel

8. Stainless Steel Plaster Sub-Frame

PFS Stainless Steel Plaster

Sub-frame

Notes:


The "default" will automatically select"standard". For example, a 304 stainlesssteel double deflection register, front bladesvertical and stainless steel damper, isModel 67DV-O. Unit will be supplied withscrew holes and #4 Brushed Satin Polishedfinish.


3. The larger dimension must alwaysbe specified first; for example 24" x 12"(610 x 305), not 12" x 24" (305 x 610).

SUGGESTED SPECIFICATION:

67DV, 67DH Double DeflectionFurnish and install Nailor Model (select one) 67DV or 67DH Double Deflection Supply Grilles of the type and size as shown on theplans and air distribution schedules. The grilles shall be constructed entirely from 304 stainless steel (316 optional), and have a dualset of streamlined shaped roll-formed adjustable blades that are spaced on 3/4" (19) centers. The frames shall be constructed ofheavy gauge stainless steel and have reinforced mitered corners. All exposed surfaces shall have a #4 Brushed Satin Polished finish.

(Optional) A stainless steel opposed blade damper adjustable from the face of the grille, shall be provided with all units.


67SV, 67SH Single DeflectionFurnish and install Nailor Model (select one) 67SV or 67SH Single Deflection Supply Grilles of the type and size as shown on theplans and air distribution schedules. The grilles shall be constructed entirely from 304 stainless steel (316 optional), and have a singleset of streamlined shaped roll-formed adjustable blades that are spaced on 3/4" (19) centers. The frames shall be constructed ofheavy gauge stainless steel and have reinforced mitered corners. All exposed surfaces shall have a #4 Brushed Satin Polished finish.

(Optional) A stainless steel opposed blade damper adjustable from the face of the grille, shall be provided with all units.


MODEL SERIES: 6700

STAINLESS STEEL SUPPLY GRILLES AND REGISTERS


GRILLE AND REGISTER OPTIONS AND ACCESSORIES

G189

GRILLES A

ND

REG

ISTERS

G

MOUNTING FRAMES• Up to four methods of fastening available for most

models.

• Sub-frame available for professionally finishedopenings.

• Surface mount adapter frame for plaster and sheetrock ceilings are available in steel and aluminum. Theysimplify installation, save time and allow ceilingplenum access.

• Panel mounting available to suit architectural ceilingsystems.

OPTIONS• A selection of optional items that are available on

grilles and registers.

• Information on custom sizing for special applications.

FINISHES• Selection of standard and non-standard finishes to

choose from.

• Anodizing of aluminum products.

AIR BALANCING DEVICES• Opposed blade dampers for every application.

• Volume extractors.

Effective air balancing of an HVAC System requires thecorrect selection, specification and installation of the rightproduct to suit the system design.

Nailor offers a comprehensive range of models andoptions to cover all applications.

Nailor balancing devices are:

• Easy to select and specify. Many items can besupplied as factory mounted or packaged accessorieson grilles and registers.

• Designed to offer a smooth, accurate and predictableresponse during adjustment for precise air metering.

• Designed to provide quick access and adjustment.

• Engineered with attention to optimizing airflow, in orderto minimize noise, turbulence and pressure drop.

PRODUCT OVERVIEWOPTIONS AND ACCESSORIES FOR GRILLES AND REGISTERS

Model OBDDOpposed Blade Damper

Steel, Duct Mount

Model OBDOpposed Blade Damper

Steel, Neck Mount

Model EX-1Volume Extractor

Model PFSub-Frame

Model DFADrywall/Plaster Frame

Surface MountCeiling Adapter

Model EX-1Volume Extractor

Model OBD-AOpposed Blade DamperAluminum, Neck Mount

Model OBD-SSOpposed Blade Damper

Stainless Steel, Neck Mount


G190

GRIL

LES

AN

D R

EGIS

TERS

G

Fastening and Border Frames

DUCT

Type A Screw Fastening (External)Standard method of fastening for all Nailor grilles andregisters in surface mount applications. All Nailorgrilles and registers are supplied this way unlessspecified otherwise. Universal application for allmodels and cost effective installation.

Screw holes are countersunk in the frame for mostmodels to provide an aesthetically pleasingappearance and are sized for #8 x 1 1/2" (38) oval-head screws which are supplied from the factorypacked with each grille or register and are painted tomatch the specified finish.

Type C Concealed MountingGrilles and registers are supplied with concealedmounting straps (at additional cost) which permitsurface mounting with concealed screws, allowing aclean frame appearance. The bracket attached to theback of the grille screws to an adjustable mountingstrap which can either be secured directly to the ductwall or hooked into a hem formed in the end of theduct. Not available on return grilles with 1/2" (13)spacing and a fixed angled blade deflection.Maximum size: 36" x 36" (914 x 914).

Type D Screw Fastening (Concealed)Screw holes are provided in the neck of the grille orregister frame. Screws are field installed at an anglethrough the grille frame and into the ductwork,providing a clean frame appearance. Installation ismore difficult than Type A due to the spaceconstriction between the grille blades. Care must betaken not to bend or scratch the grille. Notrecommended on return air grilles with a fixed angledblade deflection as accessibility to screw holes isgreatly restricted.

Type NF Narrow FrameAn optional reduced 1" (25) wide narrow borderframe is available on most aluminum models tosatisfy architectural considerations.

See individual models for availability.

Type A Screw Fastening (external)Standard

HEMMEDDUCT

Type C Concealed Mounting

DUCT

Type D Screw Fastening (concealed)

1" (25)

1 1/4"(32)OR

1 13/16"(46)

3/4" (19)OVERLAPMARGIN

NF Narrow Frame

Ceiling opening = CM + 1/4" (6)

Ceiling opening = CM + 1/4" (6)

IMPERIALMODULES

METRICMODULES

ImperialUnits

(inches)

S.I.Units(mm)

S.I.Units(mm)

12 x 12 305 x 305 300 x 300

16 x 16 406 x 406 400 x 400

20 x 20 508 x 508 500 x 500

24 x 12 610 x 305 600 x 300

24 x 24 610 x 610 600 x 600

36 x 24 914 x 610 900 x 600

48 x 12 1219 x 305 1200 x 300

48 x 24 1219 x 1219 1200 x 600

60 x 12 1524 x 305 1500 x 300


G191

GRILLES A

ND

REG

ISTERS

G

Mounting Frames

PF Plaster/Mounting FrameAvailable (at additional cost) with most standard steel and aluminum grillesand registers. The Model PF Plaster Frame is constructed from extrudedaluminum and provides a convenient and professional way for finishing offthe grille or register opening. It provides a stable anchor for attachment, whileenabling the grille or register to be detached and replaced readily withoutdisturbing the finished surface of the wall or ceiling opening. It may be usedfor surface mounting on various materials or recess mounted in wet plaster.

PF = LISTED SIZE


5/16" (8)

PF = LISTED SIZE

DUCT = LISTED SIZE + 1/4" (6)

DUCT = LISTED SIZE + 1/4" (6)

Model PF Plaster Frame

Surface Mount Recessed

1 5/8"(41)

CM = CEILING MODULE

CM =

CEI

LING

MODU

LE

3/8"(10)

Model DFS

Model DFA

BRACKET ISADJUSTABLE

SELF-TAPPINGSCREW

1 7/16"(37)

1/2" TO 7/8"(13 TO 22)1 1/16"

(27)

FRAMINGMEMBERAROUNDOPENING

(BY OTHERS)

MOUNTINGSCREWS

AREFIELD

INSTALLED

1 5/32"(29)

PLASTEROR

DRYWALLCEILING

Model DFA requires framing of the ceilingopening with 'C' channel or wood studsfor attachment with mounting screws (byothers).

Model DFS is installed quickly and easilyusing adjustable fastening angle bracketswhich adapt to various ceiling thicknesses.Frames are roll-formed corrosion-resistantsteel with staked and mitered corners.

DFS (Steel), DFA (Aluminum) Drywall/Plaster Frame The DF Series are for mounting in finished drywall or plaster ceilings to accept any standard lay-in type grille, register, diffuser or otherceiling component. Installation of the air outlet is as simple as inserting them in a standard lay-in T-Bar type ceiling system.

The DF Series simplifies and reduces installation time compared with surface mount type diffusers. This is especially true where flexibleduct is utilized. A major benefit is that the DF Series allows access to the ceiling plenum space above for maintenance purposes withoutthe need for separate access doors. The finished appearance is professional and aesthetically pleasing.

Standard Finish: AW Appliance White. Other finishes are available.

FACE VIEW

O.A. FACE = CM + 2 1/8" (54)

O.A

. FAC

E =

CM

+ 2

1/8

" (54

)

CM = CEILING MODULE

CM =

CEI

LING

MOD

ULE

1 1/2"(38)

3/8"(10)

FACE VIEW

O.A. FACE = NOM. + 1 1/2" (38)

O.A

. FAC

E =

NOM

. + 1

1/2

" (38

)

IMPERIALMODULES

METRICMODULES

ImperialUnits

(inches)

S.I.Units(mm)

S.I.Units(mm)

12 x 12 305 x 305 300 x 300

16 x 16 406 x 406 400 x 400

20 x 20 508 x 508 500 x 500

24 x 12 610 x 305 600 x 300

24 x 24 610 x 610 600 x 600

CM - 1/16" (2)

CM = CEILING MODULE

3/8"(10)

CM - 1/4" (6)

CM - 1" (25)

CM = CEILING MODULE

15/16" (24)

3/8"(10)

TEGULARCEILING

TILE

A panel can be added to the majority of Nailor’s steel and aluminum return grilles to suitmany special architectural ceiling designs and ceiling module sizes. These panel mountgrilles are available in corrosion-resistant steel for the 6100 series steel grilles and bothaluminum and corrosion-resistant steel for the 5100 and 7100 series aluminum grilles.

To specify a steel panel; add the suffix S to the end of the selected panel variant. Tospecify an aluminum panel; add the suffix A to the end of the selected panel variant. e.g.If a steel panel is required with a Spline Type ceiling module, the variant code will becomeSPS.


G192

GRIL

LES

AN

D R

EGIS

TERS

G

Panel Mounting/Ceiling Modules

Type TL

Available Ceiling Module Sizes

Border Type PL: Lay-in T-BarGrille or register is mounted in an extended panel to suit standard T-Bar Lay-in Type ceilings.

Border Type SP: SplineThe grille or register is mounted in an extended panel to suit splinetype ceiling modules.

Border Type MP: Metal Pan/Snap-inThe grille or register is mounted in an extended panel to suit metalpan ceilings that have snap-in type ceiling modules.

Border Type FP: Narrow Regressed T-Bar (Fineline®)The grille or register is mounted in an extended panel that will fit anarrow regressed T-Bar ceiling grid.

Border Type TL: Tegular Type T-BarThe grille or register is mounted in a panel that will extend below theT-Bar ceiling grid.

The maximum grille neck sizes availablefor panel mounting will be the ceilingmodule size selected - 3" (76).

Type PL

Type SP

Type MP

Type FP

CM - 1/4" (6)

CM = CEILING MODULE

CM = CEILING MODULE

CM - 1/16" (2)

13/16"(21)

CM - 1/4" (6)

CM - 5/8" (16)

CM = CEILING MODULE

9/16" (14)

5/16"(8)

Note: Splines on two opposite sides.

Steel lift bracket on the other two sides.

Ceiling Module

Imperial Units (in.) Metric Units (mm)

12 x 1224 x 1236 x 12

300 x 300600 x 300900 x 300

48 x 1220 x 2024 x 24

1200 x 300500 x 500600 x 600

36 x 2448 x 24

900 x 6001200 x 600


G193

GRILLES A

ND

REG

ISTERS

G

OPTIONS:

RACA Return Air Crosstalk AttenuatorReturn Air Crosstalk Attenuator is designed to greatly reduce theamount of sound transferred from the return air plenum throughopen vents or return grilles, into the adjoining space.

EQT Earthquake TabsEarthquake (seismic) retaining safety tabs are available; factoryinstalled on grilles or registers when required by local buildingcode that units be independently restrained and safety wired tosupporting structure.

GK Foam GasketsAn optional foam gasket is available factory installed on the rearof all Type S corrosion-resistant steel and aluminum surfacemount grilles and registers.

Eliminates air leakage and the possibility of dirt streaking andsmudging from entrainment, particularly when installed onunevenly finished surfaces such as stucco.

IS Insect Screen1/16" (2) galvanized steel mesh, factory installed.

CUSTOM SIZING:

Oversized UnitsFor specialized applications and architectural considerations;certain grilles and registers can be manufactured in singlesections larger than the standard published maximum size atadditional cost. Aspect ratio, tolerances, manufacturing capabilityand weight have all to be considered by the factory prior toacceptance. Consult your Nailor representative for specificapplications.

Fractional/Hard Metric SizesNailor grilles and registers have been designed and aremanufactured to suit HVAC systems where the duct design hasbeen done using Imperial Units of measurement (i.e. feet andinches). The majority of Nailor grilles and registers are fabricatedas standard in 1" (25) nominal incremental units, giving thedesigner great flexibility during sizing selection.

At additional cost, the majority of Nailor grilles and registers canbe custom fabricated in fractional sizes for special applicationsand in Hard Metric (S.I. Units) when the HVAC duct design hasbeen done using the Metric System.

Consult your Nailor representative for availability on specificproject applications.

FINISHES:

POWDER COAT

AW Appliance White (standard)A white finish that is currently the industry standard. Closelymatches standard finishes supplied by the majority of T-Bar ceilingsystem manufacturers. (No additional cost).

AL AluminumContains suspended metal particles to give the appearance of asilver grey metallic or anodized finish. (No additional cost).

WH Off-WhiteHas a creamy appearance. (Additional cost)

BW British WhiteMatches most white ceiling tiles. (No additional cost)

LBP Light Bronze PaintAn economical alternative that closely matches industry standardanodizing in color, sheen and appearance. (Additional cost)

MBP Medium Bronze PaintAn economical alternative that closely matches industry standardanodizing in color, sheen and appearance. (Additional cost)

DBP Dark Bronze PaintAn economical alternative that closely matches industry standardanodizing in color, sheen and appearance. (Additional cost)

BK BlackThis black has a matte finish. (Additional cost)

SP SpecialThe Nailor range of diffusers are available in any color for specialarchitectural consideration. Custom colors are individually mixedto match customer supplied samples. (Additional cost)

ALUMINUM PRODUCT FINISHES:

SA Satin (Clear) AnodizedAdds a smooth satin finish to further protect the aluminum fromcorrosion (clear). (Additional cost)

STAINLESS STEEL PRODUCT FINISH ONLY:

#4 Brushed Satin PolishedStainless Steel models only. (No additional cost)

ALSO AVAILABLE:

MI Mill Finish(No additional cost).

PPA Paint Prepared Aluminum (Washed only)(No additional cost).

PC Prime Coat PaintColor will vary (Additional cost).

Options, Custom Sizing and Finishes

LISTED SIZE - 3/8" (10)

2" (

51)


G195

GRILLES A

ND

REG

ISTERS

G

Type SL OperatorThe SL Operator incorporates a screwdriver slot, which adjustsfrom the face of the register. This operator is the standardsupplied with supply air registers such as the single and doubledeflection adjustable blade.

Type PL OperatorThe PL Operator is a concealed pivot lever, which is adjustedfrom the face of the register using a screwdriver. This operatoris for use only on fixed blade, angled deflection, return air grilles.When specifying, the blade orientation of the damper must beopposite of the grille.

Type GL OperatorThe GL Operator incorporates a lever that adjusts without theuse of tools. The lever operator extends through the grille faceand is an alternative for fixed blade, angled deflection, return airgrilles. When specifying, the blade orientation of the dampermust be opposite of the grille being used and the grille modelmust be specified.

WIDTH = LISTED DUCT SIZE - 3/8" (10)

HEI

GH

T =

LIST

EDD

UC

T SI

ZE -

3/8"

(10)

2"(51)

Model OBD Type SL (Screwdriver Slot)Grille Mount – Face Operator

Air Balancing Devices

OPPOSED BLADE DAMPERS — STEEL AND ALUMINUMNailor Opposed Blade Dampers are manufactured from heavy gauge, roll-formed, corrosion-resistant steel or extruded aluminum bladesand frame with miscellaneous steel components.

The gang operated multi-blade design with blades closing at 45 degrees permits fine volume control for accurate balancing with minimumdisturbance to the airflow pattern. Blades are individually pivoted on 1" (25) centers.

GRILLE MOUNT MODELS:OBD SteelOBD-A AluminumThis style of damper mounts directly on the neck of the grille and is sized to fit most Nailor grilles. Uses steel barbed S-clips for easy field mounting or removal when ordered separately. Supplied as standard with a screwdriver slot operator (Type SL) onsupply registers and a screwdriver pivot lever operator (Type PL) on fixed, angled deflection return registers. Type SL operator is standardif damper is ordered separately from grille. A lever operator (Type GL) is available as an option on fixed, angled deflection return registers.

Can be specified as an integral part of the grille (register) by adding a - O (steel) or - OA (aluminum) suffix to the grille model.

Min. Size = 4" x 2 1/2" (102 x 64) Max. Size = 24" x 24" (610 x 610).

Type PL (Pivot Lever)

Type GL (Lever)


G196

GRIL

LES

AN

D R

EGIS

TERS

G

Type SL OperatorThese models are supplied with a screwdriver slot face operatorthat is accessed from inside the duct by removing the grille.

Type EH OperatorThe EH Operator incorporates an external hex device thatpenetrates the duct wall to provide control. For use with 3/16" (5)Allen key wrench (by others).

Type EN OperatorThe EN Operator incorporates an external (nylon) screwdriverslot device. This device is controlled externally through the duct.

Type QD Operator *The QD Operator includes a nylon snap-in extension that fits anexternal (nylon) operator. This device also includes a handlocking quadrant operator for control and position indication.

Type QX Operator *The QX Operator includes a nylon snap-in extension that fits anexternal (nylon) operator. This device also includes a 2" (51)stand-off bracket and hand locking quadrant for control andposition indication. To ensure quadrant is located on vertical sideof duct, specify damper with blades parallel to the horizontal ductdimension.

*Not available on Model OBDD-A

Type QD or Type QX (Hand Quadrant)

STAND-OFFBRACKET

FORQX

MINI-QUADRANT

SNAP-INEXTENSION


DUCT MOUNT MODELS:OBDD SteelOBDD-A AluminumDesigned for field installation, this damper mounts independently in the duct, separate from and behind the grille. Sized to suit and offera friction fit in nominally sized ducts. Secure the dampers with 1/2" (13) long sheet metal screws (by others) through the double walledsub-frame. Supplied as standard with a screwdriver slot operator (Type SL).

Min. Size = 4" x 2 1/2" (102 x 64) Max. Size = 24" x 24" (610 x 610)

Model OBDD Type EH (Hex.)Duct Mount – External Operator

Model OBDD Type EN (Screwdriver Slot)Duct Mount – External Operator

WIDTH = LISTED DUCT SIZE - 3/8" (10) H

EIG

HT

= LI

STED

DU

CT

SIZE

- 1/8

" (3)

2"(51)

Model OBDD Type SL (Screwdriver Slot)Duct Mount – Face Operator


G197

GRILLES A

ND

REG

ISTERS

G


OPPOSED BLADE DAMPERS — STAINLESS STEELNailor Stainless Steel Opposed Blade Dampers feature heavy gauge, roll-formed blades and a heavy duty frame in all stainless steelconstruction. Type 304 stainless steel is standard with Type 316 as an available option.

The gang operated multi-blade design with blades closing at 45 degrees permits fine volume control for accurate balancing with minimumdisturbance to the airflow pattern. Blades are individually pivoted on 1" (25) centers.

GRILLE/DUCT MOUNT MODELS:OBD-SS Stainless SteelWhen ordered as part of the stainless steel grille, (using the suffix‘-O’ on the model number), the dampers are factory welded to thegrille frame to provide a secure non-removable connection. If thedampers are ordered separately, they are supplied with mountingtabs. The tabs allow the dampers to be field installed onto a grilleor to be mounted independently in the duct, separate from andbehind the grille.

All Nailor stainless steel dampers feature a Philip’s headscrewdriver operator that is accessed through the face of the grille.

1 3/4"(44)

HEI

GH

T =

LIST

ED D

UC

T SI

ZE -

1/4"

(6)

WIDTH = LISTED DUCT SIZE - 1/4" (6)OPERATOR

Model OBD-SS Grille/Duct Mount – Face Operator


G198

GRIL

LES

AN

D R

EGIS

TERS

G

Volume Extractors

MODEL SERIESEX Blades on 2" centersEXD Blades on 1" centersThe Model Series EX Volume Extractors uniformly divert airfrom the main duct into the branch take-off and across the face ofa grille or diffuser. Gang-operated parallel blades available on 2"(51) or 1" (25) centers pivot from full open to full closed with bladesoverlapping for shut-off. The curved blade design improves airflowby reducing turbulence, thereby reducing noise and pressuredrop.

Specify or order: Length x Width. (Length is first dimension.Blades are parallel to width, second dimension).

FEATURES:• Material: Galvanized steel.

• Minimum size: 6" x 4" (152 x 102).

• Maximum size: 36" x 36" (914 x 914).

Operator Types

2 1/2"(64)

L = NOMINAL LENGTH (DUCT)L - 1/4 (6)

CLOSED POSITION

1 3/8(35)

FULLYADJUSTABLE

SETTINGW

- 1/

4 (6

)W

= N

OM

INAL

WID

TH (D

UC

T)

EX = 2" (51) CENTERSEXD = 1" (25) CENTERS

Optional Accessories

RLDLocking device for

Models EX/EXD-1-R.

EX/EXD-1Standard unit with

adjusting strap.

EX/EXD-1-RRod operator for

external operation.

EX/EXD-3Screw gear operator.

Adjusts with 3/16" (48)wrench (by others).

EX/EXD-2Linkage with 7/16" (11) square hole

(2 per unit). Remoteoperator (eg. Young

Regulator #1) by others.

Documents

GRILLES AND REGISTERS - Complete Air Control … · LOUVERED FACE — SUPPLY AIR ... • Versatile selection and sizing ensures ... Models 61SV and 61SH Single Deflection Supply Grilles