Group Graphic Card

7/27/2019 Group Graphic Card

http://slidepdf.com/reader/full/group-graphic-card 1/20

GRAPHIC CARD GROUP

1) AMIR AMJAD BIN SHAFEI (32DGT2013F1022)

2) MUHAMMAD HARIZ BIN MOHD JAMIL (32DGT2013F1012)

3) MUHAMMAD ADIB MUZAKKIR BIN KASIM

(32DGT2013F1026)4) MAIZAL FAEZ IKMAL BIN JAMALUDDIN (32DGT2013F1016)

5) NOR ATINA BINTI CHE OMAR (32DGT2013F1003)

6) INTAN NADIA BINTI YUSOFF (32DGT2013F1005)



SOLUTION HOW TO UPGRADE

PROCESSOR OF A COMPUTER

SYSTEMPart 1: Identification

-Turn off your pc and remove the power cable.

-Unscrew your computer's case and remove thecover.

-Identify your motherboard, your current processor

chip, your RAM memory cards, and your video card.-Find out what kind socket your motherboard has.



Part 2: Buying A New Motherboard

- Choose a motherboard that satisfies

yourcriteria.

- Investigate the compatibility of your video

card and RAM memory.

- If the new motherboard does not support theold RAM memory, buy new compatible RAM

memory cards.



Good Motherboard and Not Good



MOTHERTBOARD FOR GAME DESIGN

Gigabyte G1.Sniper M3 LGA 1155 Micro ATX Motherboard.(2X64BIT)

Specification:

-Support for intel core i7,i5,i3.

- Intel 277 Express chipset.

-Only support ddr3 ram.

-support maximum resolution of 1290X1200.

-High defination audio.

-window 7 operating system.

-have expansion slots.

-form factor 24.4 cm X 24.4 cm.



Part 3: Replacing the Processor (Desktop Units)

-Take out your old CPU.

-Open the lever on the side of the socket.

-Take the new CPU out of the box.

-Close the ZIF to lock the cpu.



Part 4: Replacing the Motherboard

- Label each cable that is connected to the old

motherboard and take note of the placewhere the cable comes from.

- Remove all the cards connected to the

motherboard.- Remove all cables connected to the

motherboard.

- Remove the old processor with extreme careand store it.

- Unscrew and remove the old motherboard.

- Replace the motherboard.



- Replace the motherboard's screws.

- Insert the new processor.

- Make sure your new processor is correctlyplaced and fastened to the motherboard.

- Rewire the motherboard.

- Re-card your motherboard (all of the cards goin the place they fit in).



Part 5: Reassembling the Computer

- Put the PC's cover back on.

- Replace the screws in the case.

- Rewire and reconnect the power cord,

keyboard, mouse, monitor, and other

connections.

- Boot your computer and check to see if you

messed up anything.



VARIUOS COOLING METHOD AND

DEVICE USE TO KEEP THE COMPUTER

SYSTEM COOL- Run your pc with case closed.



- Clean your computer.



- Move Your Computer.



- Upgrade the cpu fan.



- Install a Case Fan (or Two).



- Stop Overclocking.



- Replace the Power Supply



- Install Component Specific Fans



- Install a Water Cooling Kit



SOURCES: 1) PC SUPPORT.COM

2) WIKI HOW.COM



THANK YOU

Documents

Group Graphic Card