1502 SW 2nd PlacePompano Beach, FL 33069

“No matter what the surface, SGM is a solid foundation you can build on.”

SGM offers a wide variety of quality installation products for every step of the way. Each product serves a specific purpose in the installation process and is designed to give you the precise performance needed for your specific project.

In short, SGM takes you from the beginning to the end of the installation process, putting your individual needs first.

pp

product guide toproduct guide to

performance, versatility and varietyprovide a quality job

performance, versatility and varietyprovide a quality job

www.sgm.cc 1.800.641.9247|

GROUTING

ANSI STANDARDS CLASSIFICATION

Cementitious Grout (CG)

Type Classes SGM ProductSpecial

Characteristic

2 = Improved Dry-Set CG-2WA A = High Abrasion Resistance

Security Polymer 2-W, A

W = Reduced Water Absorption

Reaction Resin Grouts (RG)

1 = Normal EGS RG Higher Performance Characteristics

ANSI Material Specification

SGM Product Meeting Specifications

ANSI Installation Methods

EGS - 100% Solids Epoxy Mortar & Grout System

A108.6

A108.10Security Polymer GroutA118.7 Polymer Modified Cement Grouts

A118.3 Chemical Resistant Water Cleanable Tile Setting and Grouting Epoxy

ISO CLASSIFICATION

pp

GROUT ADMIX PLUSA specially formulated additive to be used with Security Grout instead of water. For interior or exterior installations, the new Grout Admix provides maximum protection, with no sealing required.

GROUT STAINA unique concept in grout and concrete coatings. Formulated to sink deeply into pores, coating the aggregate and leaving the coloring below the wearing surface. It dries to a matte finish, which maintains the granular appearance of grout and provides a glare free, uniform color that is highly resistant to wear, sunlight, water and extreme temperatures.

POLYMER SECURITY GROUT(Latex-Portland Cement Grout)Polymer modified Portland cement based grout designed to be used with all tile types in joint widths from 1/8” to 1/2”.

EGS MORTAR GROUT SYSTEMThis 100% solid epoxy grout and mortar is highly chemical, stain resistant and yields exceptionally high strengths. Ideal for use in food service locations, laboratories and similar environments. A water-cleanable, three component system, designed for setting and grouting ceramic tile and pavers over a wide variety of substrates. Meets ANSI A118.3.

DRY SET GROUTUnsanded grout designed to be used when installing glazed bisque bodied tiles, marble or granite. Available in over 36 designer and decorator colors to compliment every wall, counter-top and back-splash. For joint width up to 1/8”.

COLOR CAULKA premium quality sealant that provides a long-lasting water-resistant seal. It is formulated with siliconized acrylic to provide a flexible, mildew-resistant, crack-resistant high adhesion product. It is color matched to all SGM sanded and non-sanded grout colors.

NEW