Inventflow: Grundfos A-partner

Grundfos NK 150-315.2/314 A2F1AE-SBQQE

Find the pump here:

https://inventflow.nl/en/pompenfilter/nk/grundfos-nk-150-315-2-314-a2f1ae-sbqqe

Contact

info@inventflow.nl

+31 (0) 546 45 80 72

Datasheet

Printed from Grundfos Product Centre [2021.12.002]

Qty. Description1 NK 150-315.2/314 A2F1AE-SBQQE

Note! Product picture may differ from actual product

Product No.: 99001710

Non-self priming, single-stage centrifugalFlange standard: pump according to EN 1092-2.

The pump is for the pumping of thin, clean orslightly contaminatedliquids without abrasive or long-fibredsolids.

Phase: Pump and 3-phase AC motor are mountedas separate units on a common baseplate and

The impeller is hydraulically as well asdynamically balanced.

The pump has the following characteristics:- flange dimensions according to

EN 1092-2,Pump housing: - Cast iron volute pump housing,

- stainless steel shaftImpeller: and Cast iron impeller and bronze wear rings,

- unbalanced mechanical shaft seal according to EN 12756.

Controls:Frequency converter: NONEPressure sensor: N

Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CSelected liquid temperature: 20 °CDensity: 998.2 kg/m³

Technical:Pump speed on which pump data are based: 1480 rpmRated flow: 480.3 m³/hPump with motor: YRated head: 27.61 mActual impeller diameter: 314 mmNominal impeller diameter: 315.2Code for shaft seal: BQQECurve tolerance: ISO9906:2012 3BBearing design: Standard

Materials:Pump housing: Cast iron

EN-GJL-250ASTM class 35

Wear ring: BrassImpeller: Cast iron

EN-GJL-200

1/9

Printed from Grundfos Product Centre [2021.12.002]

Qty. DescriptionASTM class 30

Shaft: Stainless steelEN 1.4301AISI 304

Internal pump house coating: CED

Installation:Maximum ambient temperature: 55 °CMaximum operating pressure: 10 barPipe connection standard: EN 1092-2Type of inlet connection: DINType of outlet connection: DINSize of inlet connection: DN 200Size of outlet connection: DN 150Pressure rating for connection: PN 10Coupling type: Flexible w/spacerBase frame design: EN/ISOGrouting: N

Electrical data:Motor type: SIEMENSIE Efficiency class: IE3Rated power - P2: 45 kWMains frequency: 50 HzRated voltage: 3 x 380-420D/660-725Y VRated current: 83,0-77,0/48,0-44,5 AStarting current: 640-640 %Cos phi - power factor: 0.86Rated speed: 1480 rpmEfficiency: IE3 94,2%Motor efficiency at full load: 94.2-94.2 %Motor efficiency at 3/4 load: 94.9-94.9 %Motor efficiency at 1/2 load: 95.1-95.1 %Number of poles: 4Enclosure class (IEC 34-5): IP55Insulation class (IEC 85): FMotor No: 98957821

Others:Minimum efficiency index, MEI ≥: 0.63Net weight: 759 kgGross weight: 826 kgShipping volume: 1.56 m³Country of origin: HUCustom tariff no.: 84137059

2/9

Printed from Grundfos Product Centre [2021.12.002]

99001710 NK 150-315.2/314 A2F1AE-SBQQE 50 HzH

[m]

0

5

10

15

20

25

30

35

Q [m³/h]0 50 100 150 200 250 300 350 400 450 500 550 600

eta[%]

0

20

40

60

80

100

NK 150-315.2/314, 3*400 V, 50Hz

314 mm

Pumped liquid = WaterLiquid temperature during operation = 20 °CDensity = 998.2 kg/m³

P[kW]

0

10

20

30

40

50

NPSH[m]

0

5

10

15

20

25P1

P2

3/9

Printed from Grundfos Product Centre [2021.12.002]

H[m]

0

5

10

15

20

25

30

35

Q [m³/h]0 100 200 300 400 500

eta[%]

0

20

40

60

80

100

NK 150-315.2/314, 3*400 V, 50Hz

314 mm

Pumped liquid = WaterLiquid temperature during operation = 20 °CDensity = 998.2 kg/m³

P[kW]

0

10

20

30

40

50

NPSH[m]

0

5

10

15

20

25P1

P2

Description ValueGeneral information:Product name: NK 150-315.2/314

A2F1AE-SBQQEProduct No: 99001710EAN number: 5712604993903Technical:Pump speed on which pump data arebased:

1480 rpm

Rated flow: 480.3 m³/hPump with motor: YRated head: 27.61 mActual impeller diameter: 314 mmNominal impeller diameter: 315.2Shaft diameter: 42 mmCode for shaft seal: BQQECurve tolerance: ISO9906:2012 3BPump version: A2Bearing design: StandardMaterials:Pump housing: Cast ironPump housing: EN-GJL-250Pump housing: ASTM class 35Wear ring: BrassImpeller: Cast ironImpeller: EN-GJL-200Impeller: ASTM class 30Shaft: Stainless steelShaft: EN 1.4301Shaft: AISI 304Internal pump house coating: CEDMaterial code: ACode for rubber: EInstallation:Maximum ambient temperature: 55 °CMaximum operating pressure: 10 barPipe connection standard: EN 1092-2Type of inlet connection: DINType of outlet connection: DINSize of inlet connection: DN 200Size of outlet connection: DN 150Pressure rating for connection: PN 10Coupling type: Flexible w/spacerBase frame design: EN/ISOGrouting: NConnect code: FLiquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CSelected liquid temperature: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: SIEMENSIE Efficiency class: IE3Rated power - P2: 45 kWMains frequency: 50 HzRated voltage: 3 x 380-420D/660-725Y VRated current: 83,0-77,0/48,0-44,5 AStarting current: 640-640 %Cos phi - power factor: 0.86Rated speed: 1480 rpmEfficiency: IE3 94,2%Motor efficiency at full load: 94.2-94.2 %Motor efficiency at 3/4 load: 94.9-94.9 %Motor efficiency at 1/2 load: 95.1-95.1 %

4/9

Printed from Grundfos Product Centre [2021.12.002]

Description ValueNumber of poles: 4Enclosure class (IEC 34-5): IP55Insulation class (IEC 85): FMotor protec: PTCMotor No: 98957821Controls:Frequency converter: NONEPressure sensor: NOthers:Minimum efficiency index, MEI ≥: 0.63Net weight: 759 kgGross weight: 826 kgShipping volume: 1.56 m³Country of origin: HUCustom tariff no.: 84137059

5/9

Printed from Grundfos Product Centre [2021.12.002]

99001710 NK 150-315.2/314 A2F1AE-SBQQE 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

600

1800

1200

670718

380

1669

730=

=

200160

140

150

400

100

300

300

110

23x

23x

28x

6

8

8

6/9

Printed from Grundfos Product Centre [2021.12.002]

Spare parts NK 150-315.2/314, Product No. 99001710Produced After 1633 (production year and week number)

Pos Omschrijving Opmerking tekst Classificatie Gegevens Onderdeelnr. Aantal Eenheid- Kit, bearing 95919874 1 pcs

53a O-ring Diameter: 3 1Thickness: 109,5

53 Ball bearing 154a O-ring Diameter: 3 1

Thickness: 109,554 Ball bearing 199 Retaining ring 2156a Bearing cover 2159a V-ring 2

- Kit, bearing bracket 96935044 1 pcs7.k Hex socket head cap screw Length (mm): 10 4

Thread: M636.a Nut 1076a Rivet 286 Bearing bracket 190.e Hex head screw Length (mm): 25 1

Thread: M12124d Shaft guard 1124d Shaft guard 1124.d Pan head screw 4

- Kit, coupling 96861615 1 pcs- 8 Coupling cpl. 1

89s Spacer ring 189r Spacer sleeve 189o Coupling part spacer side 189.p Coupling female 189.d Hex socket head cap screw 689.a Socket set screw Length (mm): 10 1

Thread: M889 Rubber blocks for coupling 611.a Parallel key 1

- Kit, coupling guard 98078805 1 pcs7b Hex socket head cap screw Length (mm): 10 4

Thread: M67b Retainer for coupling guard 1

- 7 Coupling guard cpl. 17e Hex socket head cap screw 37c Spacer f/coupling guard 17 Guard 194 Lock nut Thread: M6 2

- Kit, cover 96927321 1 pcs18 Plug 136 Hex nut Thread: M16 1436 Nut Thread: M12 1077 Cover f/mech. seal 1

- Kit, foot for bearing bracket 96909494 1 pcs Nut Thread: M12 2

66 Washer 290.e Hex head screw Length (mm): 25 1

Thread: M1290.d Hex head bolt Length (mm): 110 2

Thread: M1290.d Hex head bolt Length (mm): 70 2

Thread: M1290.d Hex head screw Length (mm): 30 2

Thread: M1290.c Foot 1

- Kit, foot for coupling guard 96848500 1 pcs

7/9

Printed from Grundfos Product Centre [2021.12.002]

Pos Omschrijving Opmerking tekst Classificatie Gegevens Onderdeelnr. Aantal Eenheid7h Hex head screw Length (mm): 16 2

Thread: M8- 7.d Foot cpl. 1

7l Support f/coupling guard foot 17h Hex socket head cap screw 27d Foot for coupling guard 166 Washer 266 Washer 2

- Kit, nut 96939132 1 pcs11 Key 1

- 36 Nut 166a Spring lock washer 166 Washer 167 Nut Thread: M24 1

- Kit, pump housing 96930857 1 pcs6 Pump housing 120 Plug 236 Hex nut Thread: M16 14

- Kit, rubber blocks f. coupling 96480019 1 pcs89 Rubber blocks for coupling 6

- Kit, shaft 96861522 1 pcs11.a Parallel key 111 Key 151 Shaft 166a Spring lock washer 166 Washer 167 Nut Thread: M24 1

- Kit, shaft cover 96809961 1 pcs124d Shaft guard 1124d Shaft guard 1124.d Pan head screw 4

- Spare, wear ring 96810112 1 pcs45 Wear ring 1

- V-ring 96871240 1 pcs159a V-ring 2

- Motor 1 pcs153 Ball bearing 96485758 1111 Ball bearing 96485758 1158 Corrugated spring 96764564 1156 Fan 96766451 1151 Fan cover 96775942 1191 Foot 96657886 1192 Foot 96657888 1156 Kit, fan 98360091 1151 Kit, fan cover 98062276 1159b Kit, seal ring 98062552 1176 Kit, terminal board 98062237 1164a Kit, terminal box 98062263 1176 Terminal board cpl. 96476440 1164 Terminal box cover 98642779 1164a Terminal box cpl. 96775949 17k Hex socket head cap screw Length (mm): 10 97506946 4 pcs

Thread: M628 Hex head screw Length (mm): 25 99522923 1 pcs

Thread: M1236 Nut Thread: M12 96620479 10 pcs36 Hex nut Thread: M16 96620480 14 pcs49 Impeller 99614677 1 pcs54a O-ring Diameter: 3 97511812 2 pcs

Thickness: 109,567 Nut Thread: M25 92526532 1 pcs72a O-ring Diameter: 329,79 92547632 1 pcs

Material type: EPDMThickness: 3,53

8/9

Printed from Grundfos Product Centre [2021.12.002]

Pos Omschrijving Opmerking tekst Classificatie Gegevens Onderdeelnr. Aantal Eenheid72a O-ring Diameter: 329,79 92526511 1 pcs

Material type: EPDMThickness: 3,53

72a O-ring Diameter: 329,79 97511846 1 pcsMaterial type: EPDMThickness: 3,53

72a O-ring Diameter: 329,79 97757675 1 pcsMaterial type: EPDMThickness: 3,53

77a Pan head screw 99266550 4 pcs86 Bearing bracket 99081097 1 pcs99 Retaining ring 99415814 2 pcs156a Bearing cover 97506939 2 pcs

9/9