Upload
doanthuan
View
216
Download
0
Embed Size (px)
Citation preview
PORTABLE GRAIN DRYER
T H E M O S T T E C H N O L O G I C A L L Y
A D V A N C E D D R Y E R S O N T H E M A R K E T
W W W . G R A I N S Y S T E M S . C O M
G R O W T H S T R E N G T H P R O T E C T I O N C O N T R O L
P O R TA B LE G R A I N D RY E R
THE SOLUTION
To feed our growing population, farmers will need to
produce more food in the next 40 YEARS than they
have in the past 10,000 years combined. Extraordinary
challenges call for unprecedented engineering solutions.
YEAR 20409 B I L L I O N P E O P L E
T H E T E C H N O L O G I C A L L Y A D V A N C E D
PORTABLE GRAIN DRYER
P O R TA B LE G R A I N D RY E R
W H Y A G S I D R Y E R ?
CONTROL. PROTECTION. STRENGTH.
You have planned every aspect of the planting and care of your crop.
Planning for success at harvest and post-harvest should be no different.
GSI Grain Dryers give growers the CONTROL to harvest when
necessary and to moisture levels ideal for long-term storage.
Being confi dent in the PROTECTION of your properly
conditioned grain allows you to turn your attention to
managing your operation, monitoring the markets,
and the overall STRENGTH of your business.
WHY CHOOSE GSI?
THE GLOBAL DEALERSHIP NETWORKFrom site analysis to complete storage system
recommendations, GSI’s worldwide dealership network
provides the agriculture industry with unparalleled
expertise and support.
Visit our dealer locator at http://locator.gsiag.com/gsi
to fi nd your local GSI dealer.
THE GENIUS OF GSIOur #1 concern is the quality and preservation of your grain,
a valuable asset that must be protected.
Storing, conditioning, moving, and protecting grain is a
science, and it is the foundation of our business.
That is why GSI designs and manufactures the
total grain system… not just one or two aspects.
your crop.
be
t wh
rag
K
no different.
hen
e.
MODULAR TOWER DRYERWhen cooling bins are not available,
dry & cool 5 point removal capacity
requirements are in the 800 to 1,690
BPH range, and the available foot
print space is restricted, a Modular
Tower Dryer is a great selection. Wet
grain needs to be supplied at 43’
to 63’ heights which will normally
require a bucket elevator. Modular
construction makes for easier
installation while standard grain
inverters, vacuum cooling heat
recovery, and proven tower dryer
technology assures the best quality
and effi ciency in a farm series dryer.
W H I C H D R Y E R I S R I G H T F O R Y O U ?
TOPDRYIf system design allows a 24’ to 36’ dia.,
TopDry may fi t your need. 5 point dry
and cool capacities from 500 to 2,176
BPH allow the TopDry to fi t medium
sized farm operations. TopDry oper-
ates in all heat at higher capacities than
a bin dryer while recovering all of the
heat normally expelled into the atmo-
sphere. The Batch models do not re-
quire a wet bin, minimizing the invest-
ment. AutoFlow models operate like
portable dryers and have the highest
capacity. If quality, effi ciency, mid-level
capacity, and a lower investment are
your goals, then TopDry is a perfect fi t.
T-SERIES TOWER DRYERWhere the largest capacity, even
commercial in scale is required, the
T-Series Tower Dryer is the solution.
Dry & Cool 5 point removal capacities
from 1,500 to 10,000 BPH are provid-
ed with the same structural and grain
quality, effi ciency, and environmental
performance as GSI’s Zimmerman and
GSI Commercial Tower Dryers. With
diameters from 12’ to 30’ and heights
from 54’ to 135’, this series gives the
highest capacity for the square foot-
age consumed, making the T-Series
the best choice for large farm and
even most commercial site needs.
Today’s farm operations have greatly varied needs for their drying solutions. Size, type, and investment all play a part in
the decision for which to use. Fortunately, GSI provides systems of every size and type to help with those needs.
PORTABLE DRYERSOnce drying needs exceed those that a Stir-Ator or Grain
Flow bin drying system is capable of, Portable Dryers
provide higher capacities with greater fl exibility while
minimizing the investment. They may operate either dry
& cool or all heat while cooling in properly equipped bins
using LP or natural gas with many models able to use
single phase electrical supplies. This design covers the
smaller to middle capacity 5 point removal requirements
from 220 to 2,450 BPH dry & cool and 420 to 4,000 BPH
all heat. From a simple system with grain moved by
augers to a more involved system with an overhead wet
bin, drag conveyors, and bucket elevators, GSI’s portable
dryer models are the most versatile. The low profi le of the
single module dryers work well with overhead wet bins,
while the 8’-26’ basket lengths give growers the fl exibility
they need for capacity growth. Depending on the model,
GSI’s optional grain inverters, heat recovery systems, and
noise suppression systems can further enhance effi ciency,
quality and, environmental requirements in a high
percentage of today’s growing farms.
P O R TA B LE G R A I N D RY E R
During harvest, there is plenty com-
peting for your time and attention.
How to operate your dryer should
not be one of them. Designed with
ease-of-use in mind, operating your
GSI portable dryer has never been
easier. Unmatched options combined
with simple, easy-to-read displays
make Vision controls the very best in
grain drying.
COMMITTED TO TECHNOLOGY THAT MAKES LIFE EASIERDesigned by GSI specifi cally to con-
trol your grain dryer, Vision features
VISION START SCREEN. Fully graphic color display with large touch screen,
featuring simple, easy-to-use controls.
THE HIGHEST DEGREE IN DRYER CONTROLS
a wide array of settings that offer
unparalleled options and control.
Boasting a large color screen with
easy-to-use touch screen controls,
the Vision can be remote mounted,
via a simple seven wire harness, up
to 1,000 feet away from the dryer.
The Vision also puts help at your
fi ngertips when you need it most.
Owner’s manuals are available
on-demand and on-screen at the
control box.
FEATURING:• 10.4” TFT Diagonal Color Screen
(Touch Screen Control)
• 32 Bit Microprocessor Control
• Each Safety Monitored Individually
and its Status Displayed On-screen
• All Shut-downs Logged
with Time and Date
• Remote Mounted Control Box
Requires Just a Simple
Seven Wire Harness
• Safety Disconnect on Every Dryer
• Low Voltage Safety Circuit
THE SCIENCE
V I S I O N D R Y E R C O N T R O L S
OPTIONAL WATCHDOG™ SOFTWAREGSI’s optional WatchDog™ System
allows remote monitoring of dryer
functions, such as moisture,
temperature, and dryer status, from
any web accessible device. This
innovative product also allows
you to make adjustments to your
dryer’s settings from your home,
the combine, or even the local
football game!
The WatchDog System can provide you information at any time during the
drying cycle
For more hands on control look no farther. WatchDog is the perfect
complement to the already innovative Vision system that is defi ning the
next generation of dryer controls.
Contact the GSI Dealer nearest you for more information.
ELECTRICALCONTROL FEATURES:• Exclusive Intertek ETL (nationally
recognized testing laboratory)
approved controls.
• Built to UL 508a and CSA C22.2
No. 14 standards, certifi ed to
US and Canadian electrical
requirements.
• IEC Branch Breakers: IEC controls
are higher quality, rated for more
cycles, and meet domestic and
international electric codes. All
dryers have branch breakers for
each motor.
• IEC Motor Overloads: IEC
overloads allow a wide range of
adjustment to accommodate
variances in incoming voltage.
• Auxiliary Auger IEC Contactors/
Overloads: Load and unload
auxiliary motor branch circuits are
standard. If load and unload horse-
power are specifi ed at time of
order, GSI will install properly sized
breaker, contactor, and overload
for customer’s application.
• Entrelec Terminals: Color-coded
Entrelec terminals are used for
all computer control circuits
connections, making for easy
installation, diagnosis and service.
• Safety Disconnect: For safely
disconnecting power from main
panel for servicing dryer controls.
Also provides an easy connection
point for incoming electric supply.
P O R TA B LE G R A I N D RY E R
CONTROL.PROTECTION.STRENGTH.
GSI’S HIGH EFFICIENCY BURNERGSI’s patent pending, high effi ciency
burners provide superior heated
air fl ow resulting in a cleaner fl ame,
increased fuel effi ciency, and most
importantly, lower operating costs.
Burner offers considerably improved
fl ame sensing. An electronic ignition
system monitors the burner and a view
window provides easy observation.
Maxon™ valves are used on all single
module units which promote better
fuel fl ow. An electronic ignition sys-
tem monitors the burner, and a view
window provides ease of observation.
Other features include an easy-to-adjust
vaporizer, a large service access door,
and an oil-fi lled gas pressure gauge.
This burner was developed in GSI’s
research and testing facility at the As-
sumption, IL plant. Airfl ow and static
pressure were exactly duplicated in
state of the art test stands with Air
Movement and Control Assoc. Int.
(AMCA) specifi cation airfl ow test cham-
bers so the testing would not be limited
to the fall drying season. Improvements
were made in effi ciency, fl ame stability,
and fl ame sensing over our previous
and other industry burner designs.
THE SCIENCE
COMPOSITE POLYMER FAN BLADESGSI Portable Dryers feature axial fans
with composite blades, which allow
for a very low starting load, leading
to easier starting and improved
effi ciency over centrifugal fans.
Composite blades also eliminate the
need to continuously rebalance the
fan. Additional benefi ts of composite
blades include high air fl ow across
a wide static pressure range, quiet
operation, and reduced energy cost.
OPTIMIZED AIRFLOW TO 80 CFM PER BU.Sized to match the basket to achieve
consistent airfl ow and capacity on
all models.
EVEN HEAT/GRAIN QUALITYHigh/Low fi re cycling helps to main-
tain a uniform plenum temperature.
14” wide columns hold the maximum
amount of grain while minimizing
the difference from the inside to the
outside of the column. Each plenum
chamber also has an air-mixing
chamber to thoroughly mix the air
and heat and to shield the grain
columns from direct contact with
the burner’s infrared waves. Multiple
heat zones in two-fan and larger
model dryers put the hottest air on
the highest moisture grain.
LOW PROFILE, FOLD-UP WET BINThe 14’6” low profi le overall height
permits easy set-up into existing in-
stallations and allows the GSI dryer to
fi t into locations other brands cannot.
The wet bin is perforated to enable
pre-heating of the grain, to increase
capacity, and to reduce operating
costs. Maximizes pre-heating of grain
at its highest point of moisture.
AIR MIXERSMixing vanes eliminate ”hot spots”
and create a more uniform plenum
temperature.
OPTIONAL ON/OFF FIREOffers a wider range of plenum
temperature control down to
5 degrees above ambient for wheat
and other temperature sensitive
circumstances.
VISION CONTROLSGlobally compliant Vision controls
offer more dryer performance
information than any control in the
industry. A large 10.4” touch-screen
helps make this the easiest to use
control on the market. Vision controls
allow users to track the dryer’s
history. All shut downs are logged
with time and date information.
D R Y I N G T E C H N O L O G Y
P O R TA B LE G R A I N D RY E R
PATENTED GRAIN INVERTERSTo promote consistent, even drying, higher test weights,
and a reduction of operating costs, be sure to add the
GSI Grain Inverters option to your stack dryer package.
Be sure to maximize the effi ciency of every GSI stack
dryer by including the optional Grain Inverters.
While more traditional grain exchangers move grain
from the inside of the grain column to the outside of the
column in 6” columns, the patented GSI Grain Inverters
move all grain, except the outer two inches, within the
column to eliminate over-dried grain and to maximize
drying effi ciency and grain quality. These patented Grain
Inverters redirect the warmest grain from the inside of the
column to be next to the wettest grain at the outside of
the column where it is dried by the captured heat which
would have otherwise escaped the dryer. (See diagram to
right for visual illustration.)
This process maintains optimal grain temperature, thus
maximizing grain quality while using less fuel and
signifi cantly reducing operating costs.
A convenient clean-out door
also provides easy access
for quick maintenance.
N D
or
D RY E R
KERNEL TEMPERATURE
Under 100° = Seed
100° to 120° = Human Food Grade (Full Nutrition and Taste)
120° to 140° = Animal Food Grade (Full Nutrition)
140° to 160° = Range where moderate damage and test weight loss starts
160° & above = Severe damage including physical breakage and severe test weight loss
Entering Drying Column
130° at Cooling Section
Plen
um 2
10°
Exha
ust
Air
Entering Drying Column
Up to 205° Entering Cooling Section
Plen
um 2
10°
Exha
ust
Air
DRYING WITH THE GSI GRAIN INVERTERS
DRYING WITHOUT THE GSI GRAIN INVERTERS
THE SCIENCE
AC METERING ROLL MOTOR WITH VFDAC Metering Motor with Variable
Frequency Drive (VFD) allows you to
set unload speed without the need
for time-consuming calibration. AC
motors are considerably more
durable and require limited
maintenance.
8” DURA-EDGE® AUGER FLIGHTINGAll augers feature the new
DURA-EDGE® 8” diameter fl ighting
with 1/4” ribbon. The DURA-EDGE®
fl ighting has an outside edge that is
30% thicker than regular fl ighting,
resulting in a longer life and in-
creased dependability.
ADJUSTABLE FLOW GATESAllow customized control of grain vol-
ume in each column for more consis-
tent drying when grain quality is poor
and debris is present. 4” metering rolls
are standard, an alternate system with
7” meter rolls is available as an option.
REAR DISCHARGE AUTO-SHUTDOWNA 2’ discharge extension with manual
grain sampler is standard equipment.
An automatic discharge shutdown
operates off of a hinged lid switch
at the rear discharge. It is activated
when grain overfi lls the discharge
auger and forces the lid to open.
LARGEST GRAIN HOLDING CAPACITYAllows for higher bushels per hour
to consistently achieve maximum
drying. Long retention times result in
better grain quality.
G R A I N M O V E M E N T
P O R TA B LE G R A I N D RY E R
1 Level auger with DuraEdge®
fl ighting for longer life.
2 Perforated wet bin maximizes
pre-heating of grain at its
highest point of moisture.
3 Turnbuckle belt tightener for easy
tensioning and maintenance.
4 Air mixing chambers thoroughly
mix heat and air before it enters
the drying chamber.
5 High effi ciency burners with
improved fl ame sensing.
6 Industrial grade IEC rated
contactors, breakers and
overloads insure durability and
quality while the provided load
and unload auxiliary contactors
help reduce installation costs.
7 Composite polymer fan blades
offer industry best performance in
airfl ow to electrical consumption.
8 Non-service rated safety discon-
nect circuit breaker integrated into
door handle for safe, economical
installation and maintenance.
9 Vision controls touch-screen
display, for easier operation.
10 Column doors designed to allow
for easy access and clean-out.
11 AC Meter roll with Variable
Frequency Drive (VFD) allows
material to fl ow easily resulting
in less clogging.
12 Auger with DuraEdge® fl ighting
for longer life.
2
13
46
5 7
8
9
1011
12
THE SCIENCE
E A S E O F M A I N T E N A N C E & T O U C H P O I N T S
IMPROVEDLADDER DESIGNRedesigned standard ladder package
for portable dryers to meet OSHA
specifi cations. GSI ladders feature
heavy-duty construction and slip-
resistant patterns to give extra grip
in wet conditions. Stacked dryers
include platform.
CLEAN-OUT MADE EASYLarge plenum clean-out doors make
for easy access to the unload auger
and metering rolls. Inside meter-
ing and unload auger access panels
lift out of the way without tools to
better accommodate service and
maintenance needs. Sealing strips
reduce air pressure and heat loss into
the unload chamber.
THREE-PIECE SIDEWALL SCREENSGSI’s three-piece sidewall panels
allow the top angle section alone,
the top angle and side sections, or
all of the exterior screens including
the bottom angle section to
optionally be stainless steel. This
allows for economical protection
against rust and corrosion where
needed, based on the size of dryer
and type of usage. All fastening
hardware is also stainless steel to
eliminate future corrosion.
NOISE SUPPRESSORGSI’s standard low speed 1725 rpm
blades make GSI axial fan dryers much
quieter than in the past at a level that
OSHA allows for continuous 6 hour
exposure 15’ away. Though most situa-
tions do not require the Noise Sup-
pression System those that want their
dryer to be ultra quiet, even quieter
than the competitive centrifugal fan
models, the system will reduce the
noise level at 15’ to one-fourth the
OSHA 8 hour exposure limit. System
can be integrated with Heat Reclaimer.
HEAT RECLAIMEROn multi-fan dryers, reduces the
amount of heat lost when operating in
Dry & Cool mode to the atmosphere
and recycles it, thereby reducing fuel
consumption and lowering operating
costs by up to 30%. Open ductwork
is optimally sized for 0% capacity loss
as it prevents accumulation of fi ne
material. Sized to reduce air velocity
very little chaff or air debris is pulled
into the dryer. Heat Reclaimer can be
integrated with Noise Suppressor.
1 Capacities listed are wet bushels, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.
1108 1112 1114 1116 1118 1120 1122 1126DRYING CAPACITY, SHELLED CORN1
Dry and Cool25% to 15% Staged Batch
170 BPH 210 BPH 250 BPH 280 BPH 320 BPH 360 BPH 390 BPH 460 BPH
Dry and Cool20% to 15% Staged Batch
220 BPH 270 BPH 320 BPH 370 BPH 430 BPH 480 BPH 520 BPH 610 BPH
Full Heat 30% to 15%2 190 BPH 250 BPH 300 BPH 320 BPH 380 BPH 410 BPH 460 BPH 540 BPH
Full Heat 25% to 15%2 260 BPH 340 BPH 390 BPH 440 BPH 510 BPH 560 BPH 610 BPH 720 BPH
Full Heat 20% to 15%2 420 BPH 530 BPH 610 BPH 710 BPH 820 BPH 910 BPH 990 BPH 1,160 BPH
Basic Construction1 Module1 Stage
1 Module1 Stage
1 Module1 Stage
1 Module1 Stage
1 Module1 Stage
1 Module1 Stage
1 Module1 Stage
1 Module1 Stage
Grain Columns14” x 8’
Long14” x 12’
Long14” x 14’
Long14” x 16’
Long14” x 18’
Long14” x 20’
Long14” x 22’
Long14” x 26’
Long
Total Holding Capacity 219 BU 327 BU 381 BU 436 BU 490 BU 544 BU 599 BU 708 BU
Grain Column Holding Cap. 190 BU 282 BU 329 BU 376 BU 423 BU 470 BU 517 BU 611 BU
Top Auger (Loading)8” Flight
2 HP8” Flight
2 HP8” Flight
3 HP8” Flight
5 HP8” Flight
5 HP8” Flight7.5 HP
8” Flight7.5 HP
8” Flight10 HP
Capacity 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH
Bottom Auger (Unloading)8” Flight/10” Tube
2.5 HP
8” Flight/10” Tube
2.5 HP
8” Flight/10” Tube
3 HP
8” Flight/10” Tube
5 HP
8” Flight/10” Tube
5 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
10 HP
Meter Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP
Maximum Capacity 1,125 BPH 1,680 BPH 1,960 BPH 2,240 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH
Transport Length(Hitch to Discharge Auger)
17’2” 21’2” 23’2” 25’2” 27’2” 29’2” 31’2” 35’2”
Transport Width 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’
Transport Height3 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”)
Transport Weight (approx.)(Less Transport Kit)
5,200 lbs. 6,300 lbs. 7,000 lbs. 7,500 lbs. 8,000 lbs. 8,700 lbs. 9,500 lbs. 11,000 lbs.
Installed Length 15’2” 19’2” 21’2” 23’2” 25’2” 27’2” 29’2” 33’2”
Installed Width 8’ 8’ 8’ 8’ 8’ 8’ 8’ 8’
Installed Height (Excluding Foundation Supports)
14’6” 14’6” 14’6” 14’6” 14’6” 14’6” 14’6” 14’6”
Fan 1 PH 10-16 HP, 36” 10-16 HP, 36” 10-16 HP, 40” 10-16 HP, 40” N/A N/A N/A N/A
Fan 3 PH 10-16 HP, 36” 15 HP, 36” 15 HP, 40” 15 HP, 40” 20 HP, 42” 25 HP, 42” 30 HP, 42” 40 HP, 42”
Heater (Max BTU)3.5 Mil.btu/hr
4.5 Mil.btu/hr
5.75 Mil.btu/hr
5.75 Mil.btu/hr
6.75 Mil.btu/hr
7.5 Mil.btu/hr
8.75 Mil.btu/hr
10.25 Mil.btu/hr
ELECTRIC LOAD (MIN/MAX AMPS) (FAN, LOAD AUGER, UNLOAD. AUGER.)4
Single Phase, 230 V. 101/122 101/156 109/164 124/179 N/A N/A N/A N/A
Three Phase, 208 V. 57/95 57/95 64/115 77/127 88/138 117/193 128/204 167/244
Three Phase, 230 V. 53/83 53/88 60/108 71/120 81/130 107/178 117/188 157/228
Three Phase, 460 V. 29/41 29/44 32/54 38/60 43/65 56/89 61/94 81/114
Three Phase, 575 V. 25/36 25/36 28/45 33/50 36/54 46/73 50/77 67/94
CE Certifi cation YES YES YES YES no no no no
P O R TA B LE G R A I N D RY E R
1100 SERIES
THE SPECIFICATIONS
1214 1216 1218 1220 1222 1226DRYING CAPACITY, SHELLED CORN1
Dry and Cool 25% to 15% 250 BPH 290 BPH 320 BPH 350 BPH 400 BPH 450 BPH
Dry and Cool 20% to 15% 400 BPH 470 BPH 510 BPH 560 BPH 640 BPH 730 BPH
Full Heat 30% to 15%2 330 BPH 380 BPH 410 BPH 430 BPH 480 BPH 540 BPH
Full Heat 25% to 15%2 420 BPH 480 BPH 520 BPH 590 BPH 650 BPH 730 BPH
Full Heat 20% to 15%2 680 BPH 770 BPH 840 BPH 950 BPH 1,060 BPH 1,180 BPH
Basic Construction1 Module2 Stages
1 Module2 Stages
1 Module2 Stages
1 Module2 Stages
1 Module2 Stages
1 Module2 Stages
Grain Columns 14” x 14’ Long 14” x 16’ Long 14” x 18’ Long 14” x 20’ Long 14” x 22’ Long 14” x 26’ Long
Total Holding Capacity 381 BU 436 BU 490 BU 544 BU 599 BU 708 BU
Grain Column Holding Capacity 329 BU 376 BU 423 BU 470 BU 517 BU 611 BU
Top Auger (Loading) 8” 5 HP 8” 5 HP 8” 5 HP 8” 7.5 HP 8” 7.5 HP 8” 10 HP
Capacity 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH
Bottom Auger (Unloading)8” Flight/10” Tube
5 HP
8” Flight/10” Tube
5 HP
8” Flight/10” Tube
5 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
10 HP
Meter Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP
Maximum Capacity 1,960 BPH 2,240 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH
Transport Length(Hitch to Discharge Auger)
23’2” 25’2” 27’2” 29’2” 31’2” 35’2”
Transport Width 8’ 8’ 8’ 8’ 8’ 8’
Transport Height3 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”)
Transport Weight (approx.)(Less Transport Kit)
7,600 lbs. 8,200 lbs. 9,000 lbs. 9,800 lbs. 10,500 lbs. 12,000 lbs.
Installed Length 21’2” 23’2” 25’2” 27’2” 29’2” 33’2”
Installed Width 8’ 8’ 8’ 8’ 8’ 8’
Installed Height(Excluding Foundation Supports)
14’6” 14’6” 14’6” 14’6” 14’6” 14’6”
Fans 1 PH 1@10-12 HP, 36” 1@15 HP, 36” 1@15 HP, 36” 1@15 HP, 40” N/A N/A
1@10 HP, 28” 1@10 HP, 28” 1@10 HP, 28” 1@10 HP, 28” N/A N/A
Fans 3 PH 1@10-12 HP, 36” 1@15 HP, 36” 1@15 HP, 36” 1@15 HP, 40” 1@20 HP, 42” 1@25 HP, 42”
1@10 HP, 28” 1@10 HP, 28” 1@10 HP, 28” 1@12 HP, 28” 1@12 HP, 28” 1@12 HP, 28”
Heaters (Max BTU) [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr
[email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr
ELECTRIC LOAD (MIN/MAX AMPS) (FAN, LOAD AUGER, UNLOAD. AUGER.)4
Single Phase, 230 V. 157/212 177/232 177/232 191/246 N/A N/A
Three Phase, 208 V. 112/162 112/162 112/162 125/202 136/213 164/240
Three Phase, 230 V. 99/148 104/153 104/153 116/187 126/197 154/225
Three Phase, 460 V. 52/74 55/76 55/76 61/93 66/98 80/112
Three Phase, 575 V. 48/66 49/66 49/66 54/81 57/84 68/95
CE Certifi cation YES YES no YES YES YES
1 Capacities listed are wet bushels, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.
1200 SERIES
THE SPECIFICATIONS
P O R TA B LE G R A I N D RY E R
1 Capacities listed are wet bushels, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.† = S-Series dryers are upgradable with additional modules, while the H-Series is not.
1214S 1218S 1220S/1220H† 1222S/1222H† 1226S/1226H†DRYING CAPACITY, SHELLED CORN1
Dry and Cool25% to 15% Staged Batch
260 BPH 350 BPH 400 BPH 430 BPH 530 BPH
Dry and Cool20% to 15% Staged Batch
360 BPH 450 BPH 520 BPH 570 BPH 700 BPH
Dry and Cool 25% to 15% 185 BPH 240 BPH 280 BPH 300 BPH 375 BPH
Dry and Cool 20% to 15% 300 BPH 385 BPH 445 BPH 485 BPH 600 BPH
Full Heat 30% to 15%2 300 BPH 390 BPH 450 BPH 490 BPH 620 BPH
Full Heat 25% to 15%2 450 BPH 540 BPH 620 BPH 670 BPH 820 BPH
Full Heat 20% to 15%2 730 BPH 860 BPH 990 BPH 1,080 BPH 1,330 BPH
Basic Construction1 Module2 Stages
1 Module2 Stages
1 Module2 Stages
1 Module2 Stages
1 Module2 Stages
Grain Columns 14” x 14’ Long 14” x 18’ Long 14” x 20’ Long 14” x 22’ Long 14” x 26’ Long
Total Holding Capacity 381 BU 490 BU 544 BU 599 BU 708 BU
Grain Column Holding Capacity 329 BU 423 BU 470 BU 517 BU 611 BU
Top Auger (Loading) 5 HP 5 HP 7.5 HP 7.5 HP 10 HP
Capacity 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH
Bottom Auger (Unloading)8” Flight/10” Tube
5 HP8” Flight/10” Tube
5 HP8” Flight/10” Tube
7.5 HP8” Flight/10” Tube
7.5 HP8” Flight/10” Tube
10 HP
Meter Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP
Maximum Capacity 1,960 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH
Transport Length(Hitch to Discharge Auger)
23’2” 27’2” 29’2” 31’2” 35’2”
Transport Width 8’ 8’ 8’ 8’ 8’
Transport Height3 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”)
Transport Weight (approx.)(Less Transport Kit)
9,500 lbs. 11,500 lbs. 14,500 lbs. 15,500 lbs. 18,500 lbs.
Installed Length 21’2” 25’2” 27’2” 30’2” 33’2”
Installed Width 8’8” 8’8” 8’8” / 8’† 8’8” / 8’† 8’8” / 8’†
Installed Height(Excluding Foundation Supports)
14’6” 14’6” 14’6” 14’6” 14’6”
Fans 1 PH 2@12 HP, 28” 2@10-12 HP, 36” 2@15 HP, 36” 2@15 HP, 36” N/A
Fans 3 PH 2@12 HP, 28” 2@10-12 HP, 36” 2@15 HP, 36” 2@15 HP, 36” 2@25 HP, 40”
Heaters (Max BTU) [email protected] Mil.btu/hr [email protected] Mil.btu/hr [email protected] Mil.btu/hr [email protected] Mil.btu/hr [email protected] Mil.btu/hr
ELECTRIC LOAD (MIN/MAX AMPS) (FAN, LOAD AUGER, UNLOAD. AUGER.)4
Single Phase, 230 V. 157/212 157/212 211/266 211/266 N/A
Three Phase, 208 V. 106/156 106/144 131/208 131/208 196/273
Three Phase, 230 V. 99/148 99/134 121/192 121/192 183/254
Three Phase, 460 V. 52/74 52/68 63/96 63/96 94/127
Three Phase, 575 V. 48/66 48/66 54/81 54/81 77/104
CE Certifi cation no no YES YES YES
1200S & H SERIES
THE SPECIFICATIONS
2314 2318 2320 2322 2326 2420 2426DRYING CAPACITY, SHELLED CORN1
Dry and Cool 25% to 15% 620 BPH 770 BPH 850 BPH 930 BPH 1,130 BPH 850 BPH 1,130 BPH
Dry and Cool 20% to 15% 1,000 BPH 1,240 BPH 1,380 BPH 1,500 BPH 1,840 BPH 1,380 BPH 1,840 BPH
Full Heat 30% to 15%2 670 BPH 830 BPH 920 BPH 1,010 BPH 1,200 BPH 920 BPH 1,200 BPH
Full Heat 25% to 15%2 900 BPH 1,120 BPH 1,250 BPH 1,360 BPH 1,670 BPH 1,250 BPH 1,670 BPH
Full Heat 20% to 15%2 1,460 BPH 1,810 BPH 2,010 BPH 2,200 BPH 2,700 BPH 2,010 BPH 2,700 BPH
Basic Construction2 Modules4 Stages
2 Modules4 Stages
2 Modules4 Stages
2 Modules4 Stages
2 Modules4 Stages
2 Modules4 Stages
2 Modules4 Stages
Grain Columns 14” x 14’ Long 14” x 18’ Long 14” x 20’ Long 14” x 22’ Long 14” x 26’ Long 14” x 20’ Long 14” x 26’ Long
Total Holding Capacity 731 BU 940 BU 1,044 BU 1,149 BU 1,304 BU 1,044 BU 1,340 BU
Grain Column Holding Cap. 679 BU 873 BU 970 BU 1,067 BU 1,261 BU 970 BU 1,261 BU
Top Auger (Loading) 5 HP 5 HP 7.5 HP 7.5 HP 10 HP 7.5 HP 10 HP
Capacity 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH
Bottom Auger (Unloading)8” Flight/10” Tube
5 HP
8” Flight/10” Tube
5 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
10 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
10 HP
Meter Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP
Maximum Capacity 1,960 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH 2,800 BPH 3,640 BPH
Transport Length(Hitch to Discharge Auger)
23’2” 27’2” 29’2” 31’2” 35’2” 29’2” 35’2”
Transport Width 8’ 8’ 8’ 8’ 8’ 8’ 8’
Transport Height3 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”)
Transport Weight (approx.)(Less Transport Kit)
16,000 lbs. 19,000 lbs. 21,000 lbs. 22,500 lbs. 25,000 lbs. 23,500 lbs. 28,000 lbs.
Installed Length 23’10” 27’10” 29’10” 31’10” 35’10” 29’10” 35’10”
Installed Width 8’8” 8’8” 8’8” 8’8” 8’8” 8’8” 8’8”
Installed Height(Excluding Foundation Supports)
25’11” 25’11” 25’11” 25’11” 25’11” 25’11” 25’11”
Fans 1 PH 1@15 HP, 40” N/A N/A N/A N/A N/A N/A
2@10-12 HP, 28” N/A N/A N/A N/A N/A N/A
Fans 3 PH 1@15 HP, 40” 1@20 HP, 42” 1@25 HP, 42” 1@30 HP, 42” 1@40 HP, 42” 4@15 HP, 36” 4@25 HP, 40”
2@10-12 HP, 28” 2@10-12 HP, 36” 2@15 HP, 36” 2@15 HP, 36” 2@25 HP, 40”
Heaters (Max BTU) [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr
[email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr
ELECTRIC LOAD (MIN/MAX AMPS) (FAN, LOAD AUGER, UNLOAD. AUGER.)4
Single Phase, 220 V. 230/285 N/A N/A N/A N/A 359/421 N/A
Three Phase, 208 V. 147/197 158/208 199/275 199/275 302/379 213/295 382/464
Three Phase, 230 V. 137/186 135/184 183/254 183/254 281/352 197/273 313/389
Three Phase, 460 V. 71/93 70/92 94/127 99/132 143/176 101/139 159/197
Three Phase, 575 V. 65/82 68/86 78/105 82/109 115/142 85/117 128/160
CE Certifi cation no no YES YES YES no no
1 Capacities listed are wet bushels, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.
2300 & 2400 SERIES
THE SPECIFICATIONS
P O R TA B LE G R A I N D RY E R
3414 3418 3420 3422 3426 3620 3626DRYING CAPACITY, SHELLED CORN1
Dry and Cool 25% to 15% 840 BPH 1,040 BPH 1,120 BPH 1,250 BPH 1,520 BPH 1,120 BPH 1,520 BPHDry and Cool 20% to 15% 1,340 BPH 1,670 BPH 1,800 BPH 2,020 BPH 2,450 BPH 1,800 BPH 2,450 BPHFull Heat 30% to 15%2 1,000 BPH 1,250 BPH 1,400 BPH 1,510 BPH 1,820 BPH 1,400 BPH 1,820 BPHFull Heat 25% to 15%2 1,360 BPH 1,680 BPH 1,830 BPH 2,040 BPH 2,480 BPH 1,830 BPH 2,480 BPHFull Heat 20% to 15%2 2,190 BPH 2,720 BPH 2,950 BPH* 3,300 BPH* 4,000 BPH* 2,950 BPH 4,000 BPH
Basic Construction3 Modules6 Stages
3 Modules6 Stages
3 Modules6 Stages
3 Modules6 Stages
3 Modules6 Stages
3 Modules6 Stages
3 Modules6 Stages
Grain Columns 14” x 14’ Long 14” x 18’ Long 14” x 20’ Long 14” x 22’ Long 14” x 26’ Long 14” x 20’ Long 14” x 26’ LongTotal Holding Capacity 1,074 BU 1,381 BU 1,534 BU 1,688 BU 1,995 BU 1,534 BU 1,995 BUGrain Column Holding Cap. 1,022 BU 1,314 BU 1,460 BU 1,606 BU 1,898 BU 1,460 BU 1,898 BUTop Auger (Loading) 5 HP 5 HP 7.5 HP 7.5 HP 10 HP 7.5 HP 10 HPCapacity 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH 3,800 BPH
Bottom Auger (Unloading)8” Flight/10” Tube
5 HP
8” Flight/10” Tube
5 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
10 HP
8” Flight/10” Tube
7.5 HP
8” Flight/10” Tube
10 HPMeter Roll Drive VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HP VFD, 1 HPMaximum Capacity 1,960 BPH 2,520 BPH 2,800 BPH 3,080 BPH 3,640 BPH 2,800 BPH 3,640 BPHTransport Length(Hitch to Discharge Auger)
23’2” 27’2” 29’2” 31’2” 35’2” 29’2” 35’2”
Transport Width 8’ 8’ 8’ 8’ 8’ 8’ 8’Transport Height3 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”) 13’5” (11’9”)Transport Weight (approx.)(Less Transport Kit)
23,000 lbs. 26,500 lbs. 29,500 lbs. 30,500 lbs. 35,000 lbs. 30,170 lbs. 38,750 lbs.
Installed Length 23’10” 27’10” 29’10” 31’10” 35’10” 29’10” 35’10”Installed Width 8’8” 8’8” 8’8” 8’8” 8’8” 8’8” 8’8”Installed Height(Excluding Foundation Supports)
37’3” 37’3” 37’3” 37’3” 37’3” 37’3” 37’3”
Fans 1 PH 2@15 HP, 40” N/A N/A N/A N/A N/A N/A2@12 HP, 28” N/A N/A N/A N/A N/A N/A
Fans 3 PH 2@15 HP, 40” 2@20 HP, 42” 2@25 HP, 42” 2@30 HP, 42” 2@40 HP, 42” 6@15 HP, 36” 6@25 HP, 40”2@12 HP, 28” 2@10-12 HP, 36” 2@15 HP, 36” 2@15 HP, 36” 2@25 HP, 40”
Heaters (Max BTU) [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/[email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr [email protected] Mil. btu/hr
ELECTRIC LOAD (MIN/MAX AMPS) (FAN, LOAD AUGER, UNLOAD. AUGER.)4
Single Phase, 230 V. 303/358 N/A N/A N/A N/A N/A N/AThree Phase, 208 V. 188/238 210/260 266/343 266/343 300/377 295/377 539/620Three Phase, 230 V. 175/224 183/232 245/316 245/316 279/350 273/349 441/517Three Phase, 460 V. 90/112 94/116 125/158 135/168 192/225 139/177 223/261Three Phase, 575 V. 81/98 88/106 103/130 111/138 154/181 117/149 179/211CE Certifi cation no no no no YES no no
1 Capacities listed are wet bushels, shelled corn at listed moisture content and are estimates based on drying principles, fi eld results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fi nes, adverse weather conditions, etc.
2 Grain discharged hot from the dryer will result in a fi nal moisture content of 15% after cooling in the bin.3 Shortest possible height in ( ).4 Minimum: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load. Maximum: Fan(s) & Dryer Load & Unload & largest auxiliary motor name plate amperages + 5 for control &
VFD load.* Limited by Meter Roll maximum capacity.
3400 & 3600 SERIES
THE SPECIFICATIONS
† S-Series dryers are upgradable with additional modules, while the H-Series is not.* Measured in wet bushels per hour (BPH)1 Limited by Meter Roll maximum capacity.
1220SX &1220HX †
1222SX &1222HX †
1226SX &1226HX †
2320X 2322X 2326X 2420X 2426X 3420X 3422X 3426X 3620X 3626X
STACKABLEModules 1 1 1 2 2 2 2 2 3 3 3 3 3Fans 2 2 2 3 3 3 4 4 4 4 4 6 6ELECTRICALPhase 1 or 3 1 or 3 3 3 3 3 1 or 3 3 3 3 3 1 or 3 3Voltage ALL ALL ALL ALL ALL ALL ALL ALL ALL ALL ALL ALL ALLFuel LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NG LP or NGWeight (lbs.) 14,500 15,500 18,500 21,000 22,500 25,000 24,100 28,600 29,500 30,500 35,000 31,000 39,600WET BUSHELS FULL HEAT (BPH)10 pt.* 25-15% 615 670 820 1,245 1,355 1,670 1,250 1,670 1,825 2,040 2,475 1,830 2,4805 pt.* 20-15% 990 1,080 1,330 2,010 2,195 2,700 2,010 2,700 2,9501 3,3001 4,0001 2,9501 4,0001
WET BUSHELS DRY & COOL (BPH)10 pt.* 25-15% 280 300 375 850 930 1,130 850 1,130 1,120 1,250 1,520 1,120 1,5205 pt.* 20-15% 445 485 600 1,375 1,500 1,835 1,380 1,840 1,800 2,015 2,445 1,800 2,020CE Certifi cation no no YES no YES YES no no no no YES no no
X-STREAM™PORTABLE DRYERCarrying on GSI’s proud history of
innovation in grain drying, the
X-Stream dryer features fans and heat-
ers mounted in a staggered confi gura-
tion on opposite ends of the dryer.
Independent university testing docu-
mented signifi cant savings from the
X-Stream design. By mounting the
fans and heaters on opposite ends of
the dryer and staggering each fan, the
X-Stream delivers more uniform heat
throughout the entire dryer, regard-
less of column location. As grain pass-
es through the X-Stream, it is exposed
to more consistent levels of heat. The
result is a higher quality grain that is
more evenly dried at a lower cost.
The X-Stream dryer’s exclusive mixing
chambers blend heated drying air for
the most even drying, eliminating front-
to-back moisture variation and heat loss,
resulting in higher effi ciency drying.
X-Stream dryers have been fi eld-test-
ed and proven in GSI pistachio food
grade dryers. In this stringent market,
with an extraordinarily expensive
product, even drying is the difference
between profi table pistachios that
can be sold for human consumption
versus those that are simply thrown
out or downgraded to animal feed.
GSI recommends adding optional
patented Grain Inverters to X-Stream
dryers for greater performance. Grain
Inverters and the X-Stream stack dryer
design combine to dry grain evenly
from front to back and across the entire
column without the loss of usable heat.
Vision controls are standard
on X-Stream dryers.
AVAILABLE FOR 1200H, 1200S, 2300, 2400, 3400,
AND 3600 SERIES DRYERS
X-STREAM SERIES
THE SPECIFICATIONS
GSI is a worldwide brand of AGCO Corporation.
Copyright ©2013 All rights reserved.GSI reserves the right to change designs and specifi cations without notice.
GS-020c JUL/13
W W W. G R A I N S Y S T E M S . C O M
In addition to the Portable
Grain Dryers, GSI offers a
full line of Storage Bins,
Hopper Tanks, Material
Handling Equipment, and
Tower Dryers.
For more information on
GSI’s complete line of grain
system equipment, visit us
at www.grainsystems.com