E N D L E S S P O O L®

Guaranteed Ins tal lat ion Program

$3,500 plus 10% of the list price on any Endless Pool options purchased.

June 2015

The Factory Trained Installer Program was designed to help Endless Pool customers in need of installation and service assistance. Installers from around the country come to our factory for on-site training. During training they learn about our company, the best methods for installing our pools and associated options, as well as programmed maintenance requirements.

What will my installation cost?The cost of installation varies considerably from customer to customer and product to product. The Original Endless Pool® and Endless Pool WaterWell® have a Guaranteed Installation Price, where for a fixed fee plus a percentage of the options price, a Factory Trained Installer will assemble your pool.

Installing Your OptionsYour FTI can install any of the options available from Endless Pools. This only applies, however, to options supplied with the pool and where other work isn’t required to complete the installation of the option. A custom tile coping, for example, means that the Retractable Security Cover cannot be installed until the coping is complete. Your FTI can usually accommodate but timing, scheduling and potential extra costs may be involved. Using our Synthetic Coping System allows your FTI to install a Retractable Security Cover at the same time.

Our Synthetic Skirting System allows you to finish off the outside of your Endless Pool. We recommend adding up to 6” of rigid insulation to the walls of the pool during installation. This is well worth the effort in energy savings over the many years that you will enjoy your pool. The materials and process of insulating the pool is not included in the Guaranteed Installation Price.

Our signature product, the Original Endless Pool is designed to fit just about anywhere, indoors or outside. Because of its modular design, it can be installed indoors in existing spaces. This flexibility has allowed more than 16,000 customers to realize the dream of swimming at home in an Original Endless Pool.

We have developed a nationwide network of independent Factory Trained Installers (FTI’s) who have agreed to offer a comprehensive assembly service at a guaranteed price to Endless Pool customers who have an “appropriate site”. This service is covered under a contract that you will have directly with the FTI.

For $3,500 plus 10% of the list price of any Endless Pool options purchased, the FTI will*:

• Assemble the Endless Pool

• Plumb the Water Quality System on the front panel

• Install any options that you purchase from Endless Pools.

• Place the Hydraulic Power Unit at a location of your choosing

• Fill the pool, run all systems and provide a tutorial on operating your pool

Note:

• Add $500 to the Guaranteed Installation Price for an Elite Pool.

• Add $1,000 to the Guaranteed Installation Price for a Dual Propulsion Pool

• Commercial Pool installations are not included in the Guaranteed Installation Price.

*There are some exclusions to the 10% option installation price:

• Installation price for the Automatic Retractable Security Cover is $1,000

• Installation price for the Hydrotherapy Jets (4 jets) is $250

• Installation price for Synthetic Skirting is $35 per panel

• Installation cost of gas heaters to be determined by local installer

What tasks are NOT included in the guaranteed installation price?

• Site Preparation

• Permits, Planning and Travel

• Delivery to job site

• Electrical

• Insulation

• Custom finish work

Installers may or may not be able to perform additional tasks relating to your pool project such as permits, site preparation, electrical, insulation, finish work, etc. Please discuss the potential and cost for this additional work directly with your installer.

Endless Pools 1601 Dutton Mill Rd Aston, PA 19014-2831 www.endlesspools.com swim@endlesspools.com 800.732.8660 US610.497.8676 Local610.497.9328 Fax

SITE PREPARATION

Is Your Site Ready?An “appropriate site” is a nearly level concrete surface two feet wider and three feet longer than the inside dimensions of the Endless Pool you select. If your proposed site is slightly smaller in one or both dimensions than the requirements listed above, exceptions can be made after conferring with your Endless Pool Design Representative and confirming with your FTI.

Our optional Floor Leveling System is designed to accommodate irregular floors up to 2” out of level. Please remember that custom deeper wells, or any floor preparation beyond our leveling system is outside the scope of the installation program. Your FTI may be able to perform site preparation under a separate contract. Consult with your FTI or an appropriate contractor if you are considering this type of work.

The Endless Pool is typically delivered to your driveway. The FTI may charge for moving the 2,000 plus pounds of equipment to the pool site.

Powering Your PoolIn addition to providing a suitable site you must have your electrician bring appropriate power to a GFCI protected shutoff wherever you plan to locate the Hydraulic Power Unit. The Power Unit is supplied with a 6' cord or “whip” which connects to the shutoff. Contact you Endless Pool Design Representative for specific electrical requirements for your pool model and options.

Endless Pools provides two hydraulic lines, bonding wire, and flexible 4 wire conduit of a pre-determined length. These connect between the Power Unit and the front panel of the pool where the Water Quality System is installed under a protective shroud behind whatever skirting you select. The path that these lines take is your responsibility. If a chase, or 4” conduit is desired, or significant work must be undertaken to run these lines, that work is outside the scope of the guaranteed installation price and can be included in a separate contract with your FTI.

Connecting the 6’ cord to the shutoff and connecting either end of the 4 wire conduit to the Water Quality Controller poolside and the Power Unit can be performed by a licensed electrician or the homeowner.

Other ConsiderationsPermitting is not included in the guaranteed installation price and is your responsibility. By not anchoring the Endless Pool to the ground and using our optional Floor Leveling and Tension Strap System the Endless Pool may be considered a “transportable spa” rather than a permanent pool. This distinction may have favorable permit ramifications. Your local permit official, however, is the ultimate arbiter on permit requirements. Discuss with your FTI your permit status. Typically your electrician can pull a permit for a

“transportable spa” requiring a 30 amp, 220 volt service.

Travel is not included in this agreement. In certain metropolitan areas or where the FTI is some distance away, additional charges may apply. Be sure to discuss this before signing your contract with the FTI.

Water Quality Equipment and Controls1. Skimmer/Filter2. Shut Off Valve3. Circulating Pump (120 watts)

4. Heater/Controller5. Inlet to pool6. Remote Keypad

1

2

3

45

5

4

3

1

2 86

7

10

9

1 Acrylic Water Propulsion System with 16” propeller.

2 Poolside Controls adjust heat and operate optional jets and lights.

3 Textured ABS Side Benches serve as a return system for water flow as well as perimeter seating.

4 Wireless Remote controls the swim current.

5 Optional Skirting6 Optional Swim Pace Display

allows you to see your swim pace.

7 Optional Manual or Automatic Retractable Security Covers lock in heat and lock out dirt and debris.

8 Computerized Water Quality System mounted on the front panel.

9 5 hp Hydraulic Motor powers the propulsion system.

10 Two Hydraulic Lines, Bonding Wire, Flexible Conduit with four #10 Wires supplied by Endless Pools, Inc. to length specified.

Take a Swim...Call Endless Pools for the demonstration pool nearest you, or visit our factory showroom, just 15 minutes from the Philadelphia airport, 3 miles off I-95. Our factory is located between Rt. 352 and Rt. 452 on Dutton Mill Road overlooking Chester Creek. Showroom hours are 8:00 am to 5:00 pm Monday through Friday, and weekends by appointment. Please call to schedule a visit and a swim.

Endless Pools 1601 Dutton Mill Rd Aston, PA 19014-2831 www.endlesspools.com swim@endlesspools.com 800.732.8660 US610.497.8676 Local610.497.9328 Fax D49003 0615

CONTROLLING COSTS

The cost of installing an Endless Pool® varies considerably depending on the type of installation and the construction around the pool. The cost of constructing the space surrounding the pool (particularly new construction) and finishing details will have a significant impact on the total project cost. To minimize your overall project costs, please consider:

Select an existing site and be swimming in days.The Endless Pool is designed for easy installation in an existing room. Constructing a new space will typically result in additional expense.

Aboveground installations – even with deeper pools. The Endless Pool is free standing, perfect for an aboveground installation. Aboveground installations are usually less expensive than partially or completely in-ground installations. Decking up around a finished pool makes it appear built in. Decking is typically less expensive than sinking a pool into the ground.

Use standard finishes. Endless Pools can provide finished Synthetic Coping and Skirting. These standard finishes allow our expert installers to have your pool completely finished before they leave – the only decision you need to make is what bathing suit to wear.

Our Pools are manufactured to operate efficiently.A floating thermal cover reduces heat loss and controls humidity. Our super efficient circulating pump uses less energy to run than a 120 watt bulb. Up to 6” of rigid insulation can be added to the pool walls to reduce your heating costs.

Keep it simple and you will enjoy your swim!For many customers the Endless Pool addresses a specific need. Keeping it simple gets you what you need more easily.