Upload
vuonganh
View
239
Download
1
Embed Size (px)
Citation preview
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Guide Pin GK70
9.53mm.125in .375in
14.000" Max.
1.625" Min.
Pin Length
.125" Increments
.125in
27.94mm
3.18mm
3.18mm
1.100in
28.58mm
1.125in
.7488in
19.020mm
25mm Dp.
1.00in Dp."E" = 3/8"-16 Tap
"M" = M10-1.5 Tap
"E" = For .125in X .50in Lg. Roll Pin
"M" = For 3mm X 12mm Lg. Roll Pin
1.59mm
.063in
.250in
6.35mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Guide Pin GK70-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Drill for Roll Pin
3.0mm X 10mm Dp."E" = "M" =
.125in X .38inDp.
.7500in .0005 X .125in Dp.[ 19.050mm .013 X 3.18mm Dp.]
.250in
6.35mm
AA
.125in Ref.
3.18mm
Drill & C'bore For"E" = 3/8" SHCS"M" = M10 SHCS
.063in
1.59mm
1.450in
36.83mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK70-L2
Clearance Hole"E" = 3/8" SHCS"M" = M10 SHCS(2) Places
.750in
19.05mm
Ref.
"E" = .886in [22.50mm]
"M" = 23.37mm [.920in]
2.500in
63.50mm
6.35mm
.250in
24.13mm1.250in
20.65mm
31.75mm
.950in1.2495in
31.737mm
.813in
1.190in
30.23mm
1.230in
31.23mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK70-L2-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(2) Places
"M" = 23.37mm [.920in]
"E" = .886in [22.50mm]
AA
Min.
31.50mm
1.240in
25.40mm
Min.
1.000in
1.250in+-.001.000
31.75mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
Clearance Hole"E" = 3/8" SHCS"M" = M10 SHCS
Ref..750in
19.05mm
19.05mm
.75in
"M" = 23.47mm [.924in]
"E" = .891in [22.63mm]
1.365in
34.67mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK70-H2
31.75mm
1.250in
.813in
20.64mm
1.191in
30.24mm
1.2495in
31.737mm
.313in
7.94mm
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location onthe Downloaded CAD Model.
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK70-H2-Base Machining
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(2) Places
"M" = 23.47mm [.924in]
"E" = .891in [22.63mm]
AA
1.30in [33mm] MinimumBore Depth
1.250in+-.001.000
31.75mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
.000
.86
5in
21
.97
mm
.00
0
7.68mm.303in
17.21mm.678in
1.2
40
in3
1.4
8m
m
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1REVDO NOT SCALE DRAWING Base-GK70-A
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
±0.1318.80mm
Ref.
±.005
12.70mm
.50in
62.98mm
2.480in
.740in
1.187in
30.15mm
Drilled & C'bored For"E" = 3/8" SHCS"M' = M10 SHCS(2) Places
Slip Fit For"E" = 5/16" Dowel"M" = 8mm Dowel(2) Places
Ref.
34.40mm
1.355in
.750in Ref.
19.05mm
.000
.303in 7.68mm
.00
0
.86
5in
21
.97
mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK70-A-Base Machining
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(2) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
AA
1.25in
Clearance Hole
31.8mm
.00
0
.000
.86
5in
21
.97
mm
1.2
40
in3
1.5
0m
m
.303in 7.68mm
.677in 17.20mm
2.480in Ref.
62.98mm
1.240in±.005 Ref.
31.50mm±0.13
Drilled & C'bored For"E" = 3/8" SHCS"M" = M10 SHCS(2) Places
Slip Fit For"E" = 5/16" Dowel"M" = 8mm Dowel(2) Places
.750in
19.05mm
1.355in Ref.
34.40mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Base-GK70-B1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
.000
.00
0
.303in 7.68mm
.86
5in
21
.97
mm
1.250in
31.75mm
Clearance Hole
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK70-B-Base Machining
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(2) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
AA
.00
0
.000
.87
5in
22
.23
mm
1.2
45
in3
1.6
2m
m
.375in 9.53mm
.745in 18.92mm
31.737mm
1.2495in
2.490in
20.64mm
.813in
Ref.
63.23mm
1.250in
31.75mm
.71in
18.1mm
Slip Fit For"E" = 5/16 Dowel"M" = 8mm Dowel(2) Places
Drilled & C'bored For"E" = 3/8" SHCS"M" = M10 SHCS(2) Places
.750in Ref.
19.05mm
1.490in
37.83mm
Ref.
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK70-D2
.000
.00
0
.375in 9.53mm
.87
5in
22
.23
mm
1.290in±.010
32.77mm±0.25
Clearance Hole
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(2) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK70-D2-Base Machining
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Guide Pin GK751
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
.373in
.6220in
.160in
14.000" Max.
1.625" Min.
Pin Length
.125" Increments
9.47mm.125in
15.799mm
1.100in
Flats
3.18mm
Flat
4.06mm
.7488in
19.02mm
28.58mm
1.125in
27.94mm
.125in Groove
3.18mm
"E" = 3/8-16 Tap 1.00in Dp.
"M" = M10-1.5 Tap 25mm Dp.
R.125in
3.18mm
.138in Ref.
16.93mm
.667in Flats
±0.0315.88mm
3.50mm
.625in±.001
.7500in±.0005
19.050mm±0.013
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Guide Pin GK75-Machining
.125in
3.18mm
Drill & C'bore for"E" = 3/8" SHCS"M" = M10 SHCS
1.450in
36.83mm
6.35mm
.250in
24.13mm
20.65mm
1.250in
31.75mm
.950in1.2495in
31.737mm
.813in
1.190in
30.23mm
1.230in
31.23mm
Clearance Hole"E" = 3/8" SHCS"M" = M10 SHCS(2) Places
.750in
19.05mm
Ref.
"E" = .886in [22.50mm]
"M" = 23.37mm [.920in]
2.500in
63.50mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK75-L2
*Caution: English & Metric Hole Locations are NOT the Same!
*
Min.
1.240in
31.50mm
25.40mm
Min.
1.000in
1.250in+-.001.000
31.75mm+ 0.030
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK75-L2-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(2) Places
"M" = 23.37mm [.920in]
"E" = .886in [22.50mm]
AA
*Caution: English & Metric Hole Locations are NOT the Same!
*
31.75mm
1.250in
.813in
20.64mm
1.191in
30.24mm
1.2495in
31.737mm
.313in
7.94mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK75-H2
Clearance Hole"E" = 3/8" SHCS"M" = M10 SHCS
Ref..750in
19.05mm
19.05mm
.75in
"M" = 23.47mm [.924in]
"E" = .891in [22.63mm]
1.365in
34.67mm
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
*
1.30in [33mm] MinimumBore Depth
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK75-H2-Base Machining
1.250in+-.001.000
31.75mm+ 0.030
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(2) Places
"M" = 23.47mm [.924in]
"E" = .891in [22.63mm]
AA
*Caution: English & Metric Hole Locations are NOT the Same!
*
.000
.00
0
.303in 7.68mm
.678in 17.21mm
.86
5in
21
.97
mm
1.2
40
in3
1.4
8m
m
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Base-GK75-A1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
±0.1318.80mm
Ref.
±.005
12.70mm
.50in
62.98mm
2.480in
.740in
1.187in
30.15mm
Drilled & C'bored For"E" = 3/8" SHCS"M' = M10 SHCS(2) Places
Slip Fit For"E" = 5/16" Dowel"M" = 8mm Dowel(2) Places
Ref.
34.40mm
1.355in
.750in Ref.
19.05mm
.000
.00
0
.303in 7.68mm
.86
5in
21
.97
mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK75-A-Base Machining
1.25in
Clearance Hole
31.8mm
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(2) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
AA
.00
0
.000
.86
5in
21
.97
mm
1.2
40
in3
1.5
0m
m
.303in 7.68mm
.677in 17.20mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Base-GK75-B1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Drilled & C'bored For"E" = 3/8" SHCS"M" = M10 SHCS(2) Places
Slip Fit For"E" = 5/16" Dowel"M" = 8mm Dowel(2) Places
.750in
19.05mm
1.355in Ref.
34.40mm
2.480in Ref.
62.98mm
1.240in±.005 Ref.
31.50mm±0.13
.000
.00
0
.303in 7.68mm
.86
5in
21
.97
mm
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(2) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
AA
1.250in
31.75mm
Clearance Hole
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK75-B-Base Machining
.00
0
.000
.87
5in
22
.23
mm
1.2
45
in3
1.6
2m
m
.375in 9.53mm
.745in 18.92mm
.813in
20.64mm
63.23mm
Ref.2.490in
31.75mm
1.250in
31.737mm
1.2495in
.71in
18.1mm
Slip Fit For"E" = 5/16 Dowel"M" = 8mm Dowel(2) Places
Drilled & C'bored For"E" = 3/8" SHCS"M" = M10 SHCS(2) Places
Ref.
19.05mm
.750in
1.490in
37.83mm
Ref.
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK75-D2
.000
.00
0
.375in 9.53mm
.87
5in
22
.23
mm
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(2) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK75-D2-Base Machining
1.290in±.010
32.77mm±0.25
Clearance Hole
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Guide Pin GK95
X 16mm Lg. Roll Pin"M" = For 6mm
"E" = For .250in X .62in Lg. Roll Pin
"E" = 1/2-13 Tap 1.25in Dp.
"M" = M12-1.75 Tap 32mm Dp.
.125in
3.18mm
.313in
7.94mm
4.76mm
3.18mm
34.93mm
.125in9.53mm
.188in
1.375in
.9986in
25.364mm
.375in
.125" Increments
Pin Length
2.500" Min.
14.000" Max.
1.350in
34.29mm
"E" = .250in X .50in Dp.6.0mm X 12mm Dp.
Drill for Roll Pin
"M" =
1.0000in .0005 X .188in Dp.[ 25.400mm .013 X 4.76mm Dp.]
.3125in
7.938mm
AA
.188in Ref.
4.76mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Guide Pin GK95-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Drill & C'bore For"E" = 1/2" SHCS"M" = M12 SHCS
.125in
3.18mm
1.714in
43.54mm
36.58mm
.813in.250in
38.085mm
1.4994in
1.440in
.950in
24.13mm
37.59mm
1.480in
20.65mm6.35mm
1.250in
31.75mm
Clearance Hole"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
2.666in
"E" = .290in [7.37mm]
"E" = .969in [24.61mm]
"M" = 8.25mm [.325in]
67.73mm
"M" = 25.22mm [.993in]
1.000in Ref.
25.40mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details. Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV 1 Base-GK95-L2
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"M" = 8.25mm [.325in]
"E" = .290in [7.37mm]
Bore
1.500in+-.001.000
38.10mm+ 0.030
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(4) Places
"M" = 25.22mm [.993in]
"E" = .969in [24.61mm]
A A
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK95-L2-Base-Machining
*Caution: English & Metric Hole Locations are NOT the Same!
**
1.714in
43.54mm
Clearance Hole"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
"M" = 8.25mm [.325in]
"E" = .290in [7.37mm]
2.666in
"E" = .969in [24.61mm]
"M" = 25.22mm [.993in]
67.73mm
1.000in Ref.
25.40mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK95-L3
37.59mm
.813in
1.480in
20.65mm
.250in
6.35mm
36.58mm
1.440in
38.085mm
1.4994in
49.53mm
1.950in
2.250in
57.15mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"M" = 8.25mm [.325in]
"E" = .290in [7.37mm]
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(4) Places
"M" = 25.22mm [.993in]
"E" = .969in [24.61mm]
A A
Bore
1.500in+-.001.000
38.10mm+ 0.030
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK95-L3-Base-Machining
*Caution: English & Metric Hole Locations are NOT the Same!
**
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Base-GK95-H21
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 3/8" SHCS"M" = M10 SHCS
Clearance Hole
(3) Flange Clamps onBolt Circle:"E" = 2.042in [51.87mm]"M" = 53.54mm [2.108in]
Ref.1.000in
25.40mm
19.05mm
.750in
"M" = 26.77mm [1.054in] Ref.
"E" = 1.021in [25.93mm] Ref.
1.615in
41.02mm
36.59mm
1.441in
20.64mm
.313in
7.94mm
1.4994in
38.085mm
.813in
1.250in
[31.75mm]
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location onthe Downloaded CAD Model.
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK95-H2-Base-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(3) Places on a Bolt Circle "E" = 2.042in [51.87mm]"M" = 53.54mm [2.108in]
Ref.
"E" = 1.021in [25.93mm]
"M" = 26.77mm [1.054in]
A A
Bore
1.500in+-.001.000
38.10mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
20.64mm
.313in
7.94mm
38.085mm
1.4994in
36.59mm
1.441in
.813in
2.250in
[57.15mm]
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Base-GK95-H31REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 3/8" SHCS"M" = M10 SHCS
Clearance Hole
(3) Flange Clamps onBolt Circle:"E" = 2.042in [51.87mm]"M" = 53.54mm [2.108in]
"M" = 26.77mm [1.054in] Ref.
"E" = 1.021in [25.93mm] Ref.1.000in
19.05mm
.750in
25.40mm
Ref.
1.615in
41.02mm
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING GK95-H3-Base-Machining1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(3) Places on a Bolt Circle "E" = 2.042in [51.87mm]"M" = 53.54mm [2.108in]
Ref.
"E" = 1.021in [25.93mm]
"M" = 26.77mm [1.054in]
A A
Bore
1.500in+-.001.000
38.10mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
.00
0
.000
.93
8in
23
.81
mm
1.0
63
in2
6.9
9m
m
1.3
39
in3
4m
m
.531in 13.50mm
.932in 23.68mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details. Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV 1 Base-GK95-D2
Slip Fit For"E" = 5/16" Dowel"M" = 8mm Dowel(2) Places
Drilled & C'bored For"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
1.000in Ref.
25.40mm
1.865in Ref.
47.36mm
20.64mm
68mm
Ref.
.813in
1.4994in
2.677in
38.085mm
.71in
18.1mm
1.250in
[31.75mm]
.00
0
.000
.93
8in
23
.83
mm
1.0
63
in2
7m
m
.531in 13.49mm
1.540in±.010
Clearance Hole
39.12mm±0.25
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK95-D2-Base-Machining
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
A A
.00
0
.000
.93
8in
23
.81
mm
1.0
63
in2
6.9
9m
m
1.3
39
in3
4m
m
.531in 13.50mm
.932in 23.68mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK95-D3
68mm
Ref.2.677in
20.64mm
.813in
38.085mm
1.4994in
.71in
18.1mm
2.250in
[57.15mm]
Slip Fit For"E" = 5/16" Dowel"M" = 8mm Dowel(2) Places
Drilled & C'bored For"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
1.000in Ref.
25.40mm
1.865in Ref.
47.36mm
.00
0
.000
.93
8in
23
.83
mm
1.0
63
in2
7m
m
.531in 13.49mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK95-D3-Base-Machining
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
A A
1.540in±.010
Clearance Hole
39.12mm±0.25
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Guide Pin GK1051
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
4.76mm
25.364mm
.9986in
1.375in
.188in
.125" Increments
Pin Length
2.500" Min.
14.000" Max.
34.93mm
.375in
9.53mm3.18mm
.125in
1.350in
34.29mm
"E" = 1/2"-13 Tap 1.25" Dp.
"M" = M12-1.75 Tap 32mm Dp.
.467in
Flat - (3) Places
11.86mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Guide Pin GK105-Machining
1.0000in±.0005
25.40mm±0.01
R.188in
(6) Places
4.76mm
.470in±.001
11.94mm±0.03
Flat - (3) Places
AA
Drill & C'bore For"E" = 1/2" SHCS"M" = M12 SHCS
.188in
4.78mm
1.714in
43.54mm
37.59mm
.813in
1.480in
20.65mm
.250in
6.35mm
36.58mm
1.440in
38.085mm
1.4994in24.13mm
.950in
1.250in
31.75mm
Clearance Hole"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
"M" = 8.25mm [.325in]
"E" = .290in [7.37mm]
2.666in
"E" = .969in [24.61mm]
"M" = 25.22mm [.993in]
67.73mm
1.000in Ref.
25.40mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK105-L2
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"M" = 8.25mm [.325in]
"E" = .290in [7.37mm]
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK105-L2-Base-Machining
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(4) Places
"M" = 25.22mm [.993in]
"E" = .969in [24.61mm]
A A
Bore
1.500in+-.001.000
38.10mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
**
1.714in
43.54mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK105-L3
Clearance Hole"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
"M" = 8.25mm [.325in]
"E" = .290in [7.37mm]
2.666in
"E" = .969in [24.61mm]
"M" = 25.22mm [.993in]
67.73mm
1.000in Ref.
25.40mm
37.59mm
.813in
1.480in
20.65mm
.250in
6.35mm
36.58mm
1.440in
38.085mm
1.4994in
49.53mm
1.950in
2.250in
57.15mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"M" = 8.25mm [.325in]
"E" = .290in [7.37mm]
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK105-L3-Base-Machining
Bore
1.500in+-.001.000
38.10mm+ 0.030
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(4) Places
"M" = 25.22mm [.993in]
"E" = .969in [24.61mm]
A A
*Caution: English & Metric Hole Locations are NOT the Same!
**
20.64mm
.313in
7.94mm
38.085mm
1.4994in
36.59mm
1.441in
.813in
1.250in
[31.75mm]
"M" = M10 SHCS
Clearance Hole"E" = 3/8" SHCS
(3) Flange Clamps onBolt Circle:"E" = 2.042in [51.87mm]"M" = 53.54mm [2.108in]
19.05mm
.750in
"E" = 1.021in [25.93mm] Ref.
"M" = 26.77mm [1.054in] Ref.
1.000in
25.40mm
Ref.
1.615in
41.02mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Base-GK105-H21REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location onthe Downloaded CAD Model.
*
*
Bore
1.500in+-.001.000
38.10mm+ 0.030
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(3) Places on a Bolt Circle "E" = 2.042in [51.87mm]"M" = 53.54mm [2.108in]
Ref.
"E" = 1.021in [25.93mm]
"M" = 26.77mm [1.054in]
A A
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK105-H2-Base-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
20.64mm
.313in
7.94mm
38.085mm
1.4994in
36.59mm
1.441in
.813in
2.250in
[57.15mm]
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
Base-GK105-H31REVDO NOT SCALE DRAWING
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 3/8" SHCS"M" = M10 SHCS
Clearance Hole
(3) Flange Clamps onBolt Circle:"E" = 2.042in [51.87mm]"M" = 53.54mm [2.108in]
"M" = 26.77mm [1.054in] Ref.
"E" = 1.021in [25.93mm] Ref.1.000in Ref.
25.40mm
.750in
19.05mm
1.615in
41.02mm
* Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
*
*
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(3) Places on a Bolt Circle "E" = 2.042in [51.87mm]"M" = 53.54mm [2.108in]
Ref.
"E" = 1.021in [25.93mm]
"M" = 26.77mm [1.054in]
A A
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING GK105-H3-Base-Machining1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Bore
1.500in+-.001.000
38.10mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
.00
0
.000
.93
8in
23
.81
mm
1.0
63
in2
6.9
9m
m
1.3
39
in3
4m
m
.531in 13.50mm
.932in 23.68mm
Slip Fit For"E" = 5/16" Dowel"M" = 8mm Dowel(2) Places
Drilled & C'bored For"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
1.000in Ref.
25.40mm
1.865in Ref.
47.36mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK105-D2
68mm
Ref.2.677in
20.64mm
.813in
38.085mm
1.4994in
.71in
18.1mm
1.250in
[31.75mm]
.00
0
.000
.93
8in
23
.83
mm
1.0
63
in2
7m
m
.531in 13.49mm
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
A A
1.540in±.010
Clearance Hole
39.12mm±0.25
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK105-D2-Base-Machining
.00
0
.000
.93
8in
23
.81
mm
1.0
63
in2
6.9
9m
m
1.3
39
in3
4m
m
.531in 13.50mm
.932in 23.68mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK105-D3
68mm
Ref.2.677in
20.64mm
.813in
38.085mm
1.4994in
.71in
18.1mm
2.250in
[57.15mm]
Slip Fit For"E" = 5/16" Dowel"M" = 8mm Dowel(2) Places
Drilled & C'bored For"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
1.000in Ref.
25.40mm
1.865in Ref.
47.36mm
.00
0
.000
.93
8in
23
.83
mm
1.0
63
in2
7m
m
.531in 13.49mm
1.540in±.010
Clearance Hole
39.12mm±0.25
"M" = M10-1.50 Tap"E" = 3/8"-16 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .3125in"M" = 8.00mm(2) Places
A A
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK105-D3-Base-Machining
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Guide Pin GK1201
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
(2) Plcs.8.000mm Ream"M" =
.3125in Ream"E" =
"E" = 3/8"-16 Tap 1.00in Dp."M" = M10-1.5 Tap 25mm Dp.(2) Plcs.
.800in
20.32mm
8.89mm
.350in
10.16mm
.400in
.700in
17.78mm
43.18mm
.125in12.70mm
1.700in
31.709mm
1.2484in
.188in
4.76mm
3.18mm
.125" Increments
Pin Length
2.125" Min.
14.000" Max.
.500in
1.600in
40.64mm
"M" = 8.00mm(2) Places
Ream S.F. for Dowel"E" = .3125in
Drill & C'bore For"E" = 3/8" SHCS"M" = M10 SHCS(2) Places
10.16mm
8.89mm
.350in
.700in
17.78mm
.400in
.800in
20.32mm
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Guide Pin GK120-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
1.990in
50.55mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
Base-GK120-L21REVDO NOT SCALE DRAWING
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
3.126in
"M" = 10.00mm [.394in]
"E" = 1.163in [29.54mm]
"M" = 29.06mm [1.144in]
79.41mm
"E" = .400in [10.16mm]
1.250in Ref.
31.75mm
42.93mm
1.000in .250in
44.432mm
1.7493in
1.690in
1.730in
43.94mm
24.13mm
.950in
25.40mm 6.35mm
1.125in
28.58mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING GK120-L2-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
"M" = 29.06mm [1.144in]
"E" = 1.163in [29.54mm]
"M" = 10.00mm [.394in]
"E" = .400in [10.16mm]
AA
Bore
1.750in+-.001.000
44.45mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
**
1.990in
50.55mm
44.432mm
.250in
1.690in
1.7493in
43.94mm
1.730in
49.53mm
1.950in
25.40mm
1.000in
6.35mm
42.93mm
2.125in
53.98mm
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
79.41mm
"M" = 29.06mm [1.144in]
"E" = 1.163in [29.54mm]
"M" = 10.00mm [.394in]
"E" = .400in [10.16mm]
3.126in
1.250in Ref.
31.75mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1REVDO NOT SCALE DRAWING Base-GK120-L3
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
Bore
1.750in+-.001.000
44.45mm+ 0.030
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING GK120-L3-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
"M" = 29.06mm [1.144in]
"E" = 1.163in [29.54mm]
"M" = 10.00mm [.394in]
"E" = .400in [10.16mm]
AA
*Caution: English & Metric Hole Locations are NOT the Same!
**
28.58mm
1.125in
9.53mm
.375in
1.625in
41.26mm
1.7493in
44.432mm
1.000in
25.39mm
Clearance Hole For"E" = 1/2" SHCS"M" = M12 SHCS
(3) Flange Clamps on aBolt Circle"E" = 2.400in [60.96mm]"M" = 60.24mm [2.372in]
1.865in
Ref.31.75mm
47.37mm
"M" = 30.12mm [1.186in]Ref.
"E" = 1.200in [30.48mm]
1.250in
1.000
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Base-GK120-H21
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location onthe Downloaded CAD Model.
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK120-H2-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
1.750in+-.001.000
44.45mm+ 0.030
Bore
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(3) Places on a Bolt Circle"E" = 2.400in [60.96mm]"M" = 60.24mm [2.372in]
Ref.
"E" = 1.200in [30.48mm]
"M" = 30.12mm [1.186in]
AA
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Base-GK120-H31REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
53.98mm
2.125in
9.53mm
.375in
1.625in
41.26mm
1.7493in
44.432mm
1.000in
25.39mm
Clearance Hole For"E" = 1/2" SHCS"M" = M12 SHCS
(3) Flange Clamps on aBolt Circle"E" = 2.400in [60.96mm]"M" = 60.24mm [2.372in]
1.865in
Ref.31.75mm
47.37mm
"M" = 30.12mm [1.186in]Ref.
"E" = 1.200in [30.48mm]
1.250in
1.000
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Centerof the Tap Location on theDownloaded CAD Model.
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK120-H3-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(3) Places on a Bolt Circle"E" = 2.400in [60.96mm]"M" = 60.24mm [2.372in]
Ref.
"E" = 1.200in [30.48mm]
"M" = 30.12mm [1.186in]
AA
Bore
1.750in+-.001.000
44.45mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
.000
.00
0
.750in 19.05mm
1.245in 31.62mm
1.2
50
in3
1.7
5m
m
1.3
75
in3
4.9
3m
m
1.7
45
in4
4.3
2m
m
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK120-A
"M" = M12 SHCS(4) Places
Drilled & C'bored For"E" = 1/2" SHCS
"E" = Slip Fit For 3/8" Dowel 1/2"-13 Tap X .88" Dp."M" = Slip Fit For 10mm Dowel M12-1.75 Tap X 22mm Dp.(2) Places
1.250in Ref.
31.75mm
2.490in Ref.
63.23mm
Ref.
88.63mm
3.490in
1.490in±.005
37.85mm±0.13
.00
0
.0001
.25
0in
31
.75
mm
1.3
75
in3
4.9
3m
m
.750in 19.05mm
10.00mm(2) Places
Drill & Ream PF for Dowel"E" = .375""M" =
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK120-A-Base Machining
1.88in
Clearance Hole
47.6mm
.00
0
.0001
.18
3in
30
.05
mm
1.2
45
in3
1.6
2m
m
1.5
57
in3
9.5
5m
m
.620in 15.75mm
.995in 25.27mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK120-B
79.11mm
3.115in Ref.
1.490in±.005
37.85mm±0.13
"M" = M10 SHCS(4) Places
Drilled & C'bored For"E" = 3/8" SHCS
"E" = Slip Fit For 3/8" Dowel 1/2"-13 Tap X .88" Dp."M" = Slip Fit For 10mm Dowel M12-1.75 Tap X 22mm Dp.(2) Places
1.250in Ref.
31.75mm
1.990in Ref.
50.53mm
.00
0
.0001
.18
3in
30
.05
mm
.620in 15.75mm
1.2
45
in3
1.6
2m
m
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK120-B-Base Machining
(2) Places10.00mm
Drill & Ream PF for Dowel"E" = .375in"M" =
"E" = 3/8"-16 Tap"M" = M10-1.50 Tap(4) Places
AA
1.88in
47.6mm
Clearance Hole
.0
00
.000
1.0
94
in2
7.7
8m
m
1.2
50
in3
1.7
5m
m
1.5
89
in4
0.3
5m
m
.625in 15.88mm
1.120in 28.44mm
28.58mm
1.125in
1.000in
25.40mm
.87in
22mm
1.7493in
44.432mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK120-D2
Slip Fit For"E" = 3/8" Dowel"M" = 10mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
56.88mm
Ref.
2.240in
1.250in
31.75mm
Ref.
.00
0
.000
1.0
94
in2
7.7
9m
m
1.2
50
in3
1.7
5m
m
.625in 15.88mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK120-D2-Base Machining
1.790in±.010
45.47mm±0.25
Clearance Hole
10.00mm(2) Places
Drill & Ream PF for Dowel"E" = .375in"M" = "E" = 1/2"-13 Tap
"M" = M12-1.75 Tap(4) Places
AA
.0
00
.000 1
.09
4in
27
.78
mm
1.2
50
in3
1.7
5m
m
1.5
89
in4
0.3
5m
m.625in 15.88mm
1.120in 28.44mm
25.40mm
1.000in
22mm
.87in
53.98mm
2.125in
1.7493in
44.432mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK120-D3
Slip Fit For"E" = 3/8" Dowel"M" = 10mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
56.88mm
Ref.
2.240in
1.250in
31.75mm
Ref.
.00
0
.000
1.0
94
in2
7.7
9m
m
1.2
50
in3
1.7
5m
m
.625in 15.88mm
10.00mm(2) Places
Drill & Ream PF for Dowel"E" = .375in"M" = "E" = 1/2"-13 Tap
"M" = M12-1.75 Tap(4) Places
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK120-D3-Base Machining
1.790in±.010
45.47mm±0.25
Clearance Hole
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Guide Pin GK150
(2) Plcs.10.000mm Ream"M" =
.3750in Ream"E" =
"E" = 1/2-13 Tap 1.25" Dp."M" = M12-1.75 Tap 32mm Dp.(2) Plcs.
22.23mm
.875in
11.113mm
.4375in
.4375in
11.113mm
.875in
22.23mm
49.53mm
.125in
15.88mm
1.950in
38.057mm
1.4983in
.188in
4.76mm
3.18mm
.625in
.125" Increments
Pin Length
2.375" Min.
14.000" Max.
1.950in
49.53mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Guide Pin GK150-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"M" = 10mm(2) Places
Ream S.F. for Dowel"E" = .3750in
Drill & C'bore For"E" = 1/2" SHCS"M" = M12 SHCS(2) Places
11.113mm
.4375in
11.113mm
22.225mm
.8750in
.4375in
.875in
22.23mm
A A
2.360in
59.94mm
52.32mm
1.000in .250in
53.957mm
2.1243in
2.060in
2.105in
53.47mm
24.13mm
.950in
25.40mm 6.35mm
1.125in
28.58mm
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
"M" = 34.00mm [1.338in]
"E" = .400in [101.6mm]
89.27mm
"E" = 1.357in [34.46mm]
"M" = 10.00mm [.394in]
3.515in
1.500in Ref.
38.10mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details. Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV 1 Base-GK150-L2
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"M" = 10.00mm [.394in]
"E" = .400in [10.16mm]
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details. Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV 1 GK150-L2-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
"M" = 34.00mm [1.338in]
"E" = 1.357in [34.47mm]
A A
2.125in+-.001.000
53.98mm+ 0.030
Bore
*Caution: English & Metric Hole Locations are NOT the Same!
**
2.360in
59.94mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK150-L3
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
3.515in
"M" = 10.00mm [.394in]
"E" = .400in [101.6mm]
89.27mm
"E" = 1.357in [34.46mm]
"M" = 34.00mm [1.338in]
1.500in Ref.
38.10mm
49.53mm
1.000in
1.950in
25.40mm
.250in
6.35mm
52.32mm
2.060in
53.957mm
2.1243in
53.47mm
2.105in
2.125in
53.98mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"M" = 10.00mm [.394in]
"E" = .400in [10.16mm]
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details. Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV 1 GK150-L3-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
"M" = 34.00mm [1.338in]
"E" = 1.357in [34.47mm]
A A
2.125in+-.001.000
53.98mm+ 0.030
Bore
*Caution: English & Metric Hole Locations are NOT the Same!
**
.375in
9.53mm
53.957mm
1.000in
25.40mm
2.1243in
1.999in
50.78mm
1.125in
28.58mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK150-H2
"M" = 70.46mm [2.774in]
(3) Flange Clamps onBolt Circle:"E" = 2.774in [70.46mm]
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS
1.500in
38.10mm
Ref. "E" = 1.387in [35.23mm]
"M" = 35.23mm [1.387in]
1.000in
25.40mm
2.240in
56.90mm
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
*
*
Bore
2.125in- .000
+.001
53.98mm0
+0.03
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(3) Places on a Bolt Circle"E" = 2.774in [70.46mm]"M" = 70.46mm [2.774in]
Ref.
"E" = 1.387in [35.23mm]
"M" = 35.23mm [1.387in]
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK150-H2-Base Machining
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"M" = 70.46mm [2.774in]
(3) Flange Clamps onBolt Circle:"E" = 2.774in [70.46mm]
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS
1.000in
25.40mm
1.500in
38.10mm
Ref. "E" = 1.387in [35.23mm]
"M" = 35.23mm [1.387in]
2.240in
56.90mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK150-H3
53.957mm
2.1243in
25.40mm
1.000in
50.78mm
1.999in
9.53mm
.375in
2.125in
53.98mm
* Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK150-H3-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(3) Places on a Bolt Circle"E" = 2.774in [70.46mm]"M" = 70.46mm [2.774in]
Ref.
"E" = 1.387in [35.23mm]
"M" = 35.23mm [1.387in]
AA
Bore
2.125in- .000
+.001
53.98mm0
+0.03
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
.00
0
19.05mm
.000
.750in
31
.75
mm
36
.51
mm
1.4
38
in
44
.31
mm
1.7
45
in
1.2
50
in
1.245in 31.62mm
Slip Fit For"E" = 3/8" Dowel"M" = 10mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
Ref.
2.490in
63.23mm
Ref.
88.63mm
3.490in
1.500in Ref.
38.10mm
2.124in
53.96mm
1.000in
22mm
.87in25.40mm
50.78mm
1.999in
1.125in
28.58mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Base-GK150-D2
.00
0
.0001
.25
0in
31
.75
mm
1.4
38
in3
6.5
1m
m
.750in 19.05mm
2.165in±.010
Clearance Hole
54.99mm±0.25
"M" = M12-1.75 Tap(4) Places
"E" = 1/2"-13 Tap
Drill & Ream PF for Dowel"E" = .375""M" = 10.00mm(2) Places
A A
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK150-D2-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
.00
0
.0001
.25
0in
31
.75
mm
1.4
38
in3
6.5
1m
m
1.7
45
in4
4.3
1m
m
.750in 19.05mm
1.245in 31.62mm
1.999in
2.124in
53.96mm
22mm
1.000in .87in25.40mm
50.78mm
2.125in
53.98mm
Slip Fit For"E" = 3/8" Dowel"M" = 10mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
88.63mm
Ref.
63.23mm
Ref.
2.490in
3.490in
1.500in Ref.
38.10mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Base-GK150-D3
.00
0
.0001
.25
0in
31
.75
mm
1.4
38
in3
6.5
1m
m
.750in 19.05mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK150-D3-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
2.165in±.010
Clearance Hole
54.99mm±0.25
"M" = M12-1.75 Tap(4) Places
"E" = 1/2"-13 Tap
Drill & Ream PF for Dowel"E" = .375""M" = 10.00mm(2) Places
A A
"E" = 3/8"-16 Tap 1.00in Dp."M" = M10-1.5 Tap 25mm Dp.(4) Plcs. On a 1.250in [31.75mm]Bolt Circle
.625in
Ref.
15.88mm
2.200in
55.88mm
57.15mm
12.682mm
.4993in
.500in
12.70mm
.125" Increments
Pin Length
2.125" Min.
14.000" Max.
.055in
1.40mm
3.18mm
.125in .750in
19.05mm
2.250in
1.7482in
44.404mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Guide Pin GK175
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REVGuide Pin GK175-Machining
Drill & C'bore For"E" = 3/8" SHCS"M" = M10 SHCS(4) Places
15.88mm
.625in
.5000in
12.700mm
Ream
15.88mm
.625in
31.75mm
1.250in
1.250in
31.75mm
AA
2.600in
66.04mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK175-L2
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
"M" = 11.81mm [.465in]
"E" = .500in [12.7mm]
"E" = 1.456in [36.98mm]
"M" = 36.73mm [1.446in]
3.713in
94.31mm
1.750in Ref.
44.45mm
2.355in
.250in
59.82mm
24.13mm
1.000in
25.40mm
.950in
58.67mm
2.310in
2.3742in
60.305mm
6.35mm
1.125in
28.58mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK175-L2-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
"M" = 36.73mm [1.446in]
"E" = 1.456in [36.98mm]
"M" = 11.81mm [.465in]
"E" = .500in [12.7mm] AA
Bore
2.375in+-.001.000
60.33mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
2.600in
66.04mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK175-L3
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
3.713in
"M" = 11.81mm [.465in]
"E" = .500in [12.7mm]
94.31mm
"E" = 1.456in [36.98mm]
"M" = 36.73mm [1.446in]
1.750in Ref.
44.45mm
49.53mm
1.950in
25.40mm
1.000in
58.67mm
2.310in
60.305mm
2.3742in
.250in
6.35mm
59.82mm
2.355in
2.125in
53.98mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK175-L3-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
"M" = 36.73mm [1.446in]
"E" = 1.456in [36.98mm]
"M" = 11.81mm [.465in]
"E" = .500in [12.7mm] AA
Bore
2.375in+-.001.000
60.33mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"M" = M12 SHCS"E" = 1/2" SHCSClearance Hole
(4) Flange ClampsRequired
Ref.1.750in
44.45mm
25.40mm
1.000in
"M" = 38.00mm [1.496in]
"E" = 1.510in [38.35mm]
2.490in
63.25mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK175-H2
9.53mm
.375in
1.000in
25.40mm
2.249in
57.13mm
2.3742in
60.305mm
1.125in
28.58mm
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
*
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places on a Bolt Circle"E" = 3.020in [76.7mm]"M" = 76.00mm [2.992in]
Ref.
"E" = 1.510in [38.35mm]
"M" = 38.00mm [1.496in]
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK175-H2-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Bore
2.375in+-.001.000
60.33mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
1.000in
25.40mm
57.13mm
2.249in
60.305mm
2.3742in
9.53mm
.375in
2.125in
53.98mm
"E" = 1/2" SHCS"M" = M12 SHCS
Clearance Hole
(4) Flange ClampsRequired
25.40mm
1.000in
"E" = 1.510in [38.35mm]
"M" = 38.00mm [1.496in]
1.750in
44.45mm
Ref.
2.490in
63.25mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK175-H3
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
*
Bore
2.375in+-.001.000
60.33mm+ 0.030
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places on a Bolt Circle"E" = 3.020in [76.7mm]"M" = 76.00mm [2.992in]
Ref.
"E" = 1.510in [38.35mm]
"M" = 38.00mm [1.496in]
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK175-H3-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
.00
0
.000
1.5
00
in3
8.1
0m
m
1.6
25
in4
1.2
8m
m
1.9
95
in5
0.6
7m
m
.750in 19.05mm
1.245in 31.62mm
Ref.
101.33mm
3.990in
1.490in±.005
37.85mm±0.13
"M" = M12 SHCS(4) Places
Drilled & C'bored For"E" = 1/2" SHCS
"E" = Slip Fit For 3/8" Dowel 1/2"-13 Tap X .88" Dp."M" = Slip Fit For 10mm Dowel M12-1.75 Tap X 22mm Dp.(2) Places
1.750in Ref.
44.45mm
2.490in Ref.
63.23mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK175-A
.00
0
.000
1.5
00
in3
8.1
0m
m
1.6
25
in4
1.2
8m
m.750in 19.05mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK175-A-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"M" = M12-1.75 Tap"E" = 1/2"-13 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .375in"M" = 10.00mm(2) Places
A A
2.38in
Clearance Hole
60.3mm
.000
.00
0
.875in 22.23mm
1.370in 34.79mm
1.3
13
in3
3.3
4m
m
1.5
00
in3
8.1
0m
m
1.8
07
in4
5.9
0m
m
Slip Fit For"E" = 3/8" Dowel"M" = 10mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
1.750in
44.45mm
2.740in Ref.
69.58mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK175-D2
Ref.
60.305mm
91.81mm
3.615in
22mm
1.000in
25.40mm
.87in
2.3742in
1.125in
28.58mm
.00
0
.0001
.31
3in
33
.34
mm
1.5
00
in3
8.1
0m
m
.875in 22.23mm
Bore
2.415in±.010
61.34mm±0.25
"M" = M12-1.75 Tap"E" = 1/2"-13 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .375in"M" = 10.00mm(2) Places
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK175-D2-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
.000
.00
0
.875in 22.23mm
1.370in 34.79mm
1.3
13
in3
3.3
4m
m
1.5
00
in3
8.1
0m
m
1.8
07
in4
5.9
0m
m
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK175-D3
Slip Fit For"E" = 3/8" Dowel"M" = 10mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
1.750in
44.45mm
2.740in Ref.
69.58mm
22mm
3.615in
.87in
25.40mm
1.000in
60.305mm
2.3742in
91.81mm
Ref.
2.125in
53.98mm
.00
0
.0001
.31
3in
33
.34
mm
1.5
00
in3
8.1
0m
m
.875in 22.23mm
Bore
2.415in±.010
61.34mm±0.25
"M" = M12-1.75 Tap"E" = 1/2"-13 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .375in"M" = 10.00mm(2) Places
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK175-D3-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Guide Pin GK180
"E" = 1/2"-13 Tap 1.25in Dp."M"= M12-1.75 Tap 32mm Dp.(3) Places Equally SpacedOn a 1.000in [25.4mm] Bolt Circle
.500in
Ref.
12.70mm
2.200in
55.88mm
57.15mm
.250in
6.35mm
3.18mm
.125in .750in
19.05mm
.125" Increments
Pin Length
2.625" Min.
14.000" Max.
2.250in
1.7482in
44.404mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Guide Pin GK180-Machining
1.7500in .0005 X .250in Dp.[ 44.450mm .013 X 6.35mm Dp.]
AA
.250 Ref.
Drill & C'bore For"E" = 1/2" SHCS"M" = M12 SHCS(3) Places EquallySpaced on a
1.000in [25.40mm]Bolt Circle
.500 Ref.
2.600in
66.04mm
24.13mm
.950in
25.40mm
1.000in
58.67mm
2.310in
60.305mm
2.3742in
.250in
6.35mm
59.82mm
2.355in
1.125in
28.58mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK180-L2
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
3.713in
"M" = 11.81mm [.465in]
"E" = .500in [12.7mm]
94.31mm
"E" = 1.456in [36.98mm]
"M" = 36.73mm [1.446in]
1.750in Ref.
44.45mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
Bore
2.375in+-.001.000
60.33mm+ 0.030
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK180-L2-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
"M" = 36.73mm [1.446in]
"E" = 1.456in [36.98mm]
"M" = 11.81mm [.465in]
"E" = .500in [12.7mm] AA
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
2.600in
66.04mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK180-L3
49.53mm
1.950in
25.40mm
1.000in
58.67mm
2.310in
60.305mm
2.3742in
.250in
6.35mm
59.82mm
2.355in
2.125in
53.98mm
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
3.713in
"M" = 11.81mm [.465in]
"E" = .500in [12.7mm]
94.31mm
"E" = 1.456in [36.98mm]
"M" = 36.73mm [1.446in]
1.750in Ref.
44.45mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV GK180-L3-Base Machining
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places
"M" = 36.73mm [1.446in]
"E" = 1.456in [36.98mm]
"M" = 11.81mm [.465in]
"E" = .500in [12.7mm] AA
Bore
2.375in+-.001.000
60.33mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
"E" = 1/2" SHCS"M" = M12 SHCS
Clearance Hole
(4) Flange ClampsRequired
25.40mm
1.000in
"E" = 1.510in [38.35mm]
"M" = 38.00mm [1.496in]
1.750in
44.45mm
Ref.
2.490in
63.25mm
1.000in
25.40mm
57.13mm
2.249in
60.305mm
2.3742in
9.53mm
.375in
1.125in
28.58mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK180-H2
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK180-H2-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places on a Bolt Circle"E" = 3.020in [76.7mm]"M" = 76.00mm [2.992in]
Ref.
"E" = 1.510in [38.35mm]
"M" = 38.00mm [1.496in]
AA
Bore
2.375in+-.001.000
60.33mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
1.000in
25.40mm
57.13mm
2.249in
60.305mm
2.3742in
9.53mm
.375in
2.125in
53.98mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK180-H3
"E" = 1/2" SHCS"M" = M12 SHCS
Clearance Hole
(4) Flange ClampsRequired
25.40mm
1.000in
"E" = 1.510in [38.35mm]
"M" = 38.00mm [1.496in]
1.750in
44.45mm
Ref.
2.490in
63.25mm
*Caution: English & Metric Hole Locations are NOT the Same!Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the DownloadedCAD Model.
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK180-H3-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(4) Places on a Bolt Circle"E" = 3.020in [76.7mm]"M" = 76.00mm [2.992in]
Ref.
"E" = 1.510in [38.35mm]
"M" = 38.00mm [1.496in]
AA
Bore
2.375in+-.001.000
60.33mm+ 0.030
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
.000
.00
0
.875in 22.23mm
1.370in 34.79mm
1.3
13
in3
3.3
4m
m
1.5
00
in3
8.1
0m
m
1.8
07
in4
5.9
0m
m
Slip Fit For"E" = 3/8" Dowel"M" = 10mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
1.750in
44.45mm
2.740in Ref.
69.58mm
22mm
3.615in
.87in
25.40mm
1.000in
60.305mm
2.3742in
91.81mm
Ref.
1.125in
28.58mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK180-D2
.00
0
.0001
.31
3in
33
.34
mm
1.5
00
in3
8.1
0m
m
.875in 22.23mm
Bore
2.415in±.010
61.34mm±0.25
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK180-D2-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"M" = M12-1.75 Tap"E" = 1/2"-13 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .375in"M" = 10.00mm(2) Places
AA
.000
.00
0
.875in 22.23mm
1.370in 34.79mm
1.3
13
in3
3.3
4m
m
1.5
00
in3
8.1
0m
m
1.8
07
in4
5.9
0m
m
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK180-D3
Slip Fit For"E" = 3/8" Dowel"M" = 10mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
1.750in
44.45mm
2.740in Ref.
69.58mm
22mm
3.615in
.87in
25.40mm
1.000in
60.305mm
2.3742in
91.81mm
Ref.
2.125in
53.98mm
.00
0
.0001
.31
3in
33
.34
mm
1.5
00
in3
8.1
0m
m
.875in 22.23mm
"M" = M12-1.75 Tap"E" = 1/2"-13 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .375in"M" = 10.00mm(2) Places
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING GK180-D3-Base Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Bore
2.415in±.010
61.34mm±0.25
1.970in
50.04mm
.730in
18.54mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Locking Collar GK180
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(3) Places EquallySpaced on a
1.000in [25.40mm]Bolt Circle
.500in Ref.
12.70mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Locking Collar GK180-Machining
"E" = .531in"M" = 13.5mmDrill Thru (3) PlacesEqually Spaced on a
1.000in [25.4mm]Bolt Circle
1.7500 .0005 X .250in Dp.
[ 44.450mm .013 X 6.35mm Dp.]
.500in
12.70mm
Ref.
AA
6.35mm
.250in Ref.
.750in
19.05mm
2.000in±.002
50.80mm±0.05
Bore
62.23mm
63.50mm
2.500in
50.749mm
1.9980in
.625in
15.88mm
.055in
1.40mm
3.18mm
.125in.750in
19.05mm
.125" Increments
Pin Length
2.375" Min.
14.000" Max.
2.450in
.6243in
15.857mm
"E" = 3/8-16 Tap 1.00" Dp."M" = M10-1.5 Tap 25mm Dp.(6) Places Equally SpacedOn a 1.376" [34.95mm]Bolt Circle
.688in
Ref.
17.48mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Guide Pin GK200
Drill & C'bore For"E" = 3/8" SHCS"M" = M10 SHCS(6) Places Equally Spacedon a 1.376in [34.95mm]Bolt Circle
17.48mm
.688in
.6250in Ream
15.875mmAA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWINGGuide Pin GK200-Machining
1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
2.810in
71.37mm
4.100in
104.14mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK200-L3
25.40mm
1.000in
2.6241in
66.652mm
65.02mm
2.560in
.250in
6.35mm
2.125in
53.98mm
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(6) Places
"E" = 1.665in [42.29mm]
"M" = 41.76mm [1.644in]
"E" = .833in [21.16mm]
"M" = 20.88mm [.822in]
"M" = 36.17mm [1.424in]
"E" = 1.442in [36.63mm]
2.000in Ref.
50.80mm
*Caution: English & Metric Hole Locations are NOT the Same!
**
*
Bore
2.625in- .000
+.001
66.68mm0
+0.03
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Base-GK200-L3-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(6) Places
"M" = 36.17mm [1.424in]
"E" = 1.442in [36.63mm]
"E" = .833in [21.16mm]
"M" = 20.88mm [.822in]
"M" = 41.76mm [1.644in]
"E" = 1.665in [42.29mm]
A A
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
*
2.810in
71.37mm
4.100in
104.14mm
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(6) Places
"M" = 20.88mm [.822in]
"E" = .833in [21.16mm]
"E" = 1.442in [36.63mm]
"M" = 36.17mm [1.424in]
"E" = 1.665in [42.29mm]
"M" = 41.76mm [1.644in]
2.000in Ref.
50.80mm
2.6241in
66.652mm
1.000in
2.560in
25.40mm
.250in
6.35mm
65.02mm
3.125in
79.38mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK200-L4*Caution: English & Metric Hole Locations are NOT the Same!
*
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
Base-GK200-L4-Machining1REVDO NOT SCALE DRAWING
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Bore
2.625in- .000
+.001
66.68mm0
+0.03
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(6) Places
"M" = 20.88mm [.822in]
"E" = .833in [21.16mm]
"M" = 36.17mm [1.424in]
"E" = 1.442in [36.63mm]
"M" = 41.76mm [1.644in]
"E" = 1.665in [42.29mm]
A A
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details. Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV 1 Base-GK200-H3
63.48mm
2.499in
25.40mm
9.53mm
.375in
1.000in
66.652mm
2.6241in
2.125in
53.98mm
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS
(5) Flange Clamps onBolt Circle:"E" = 3.280in [83.31mm]"M" = 82.60mm [3.252in]
50.80mm
"M" = 41.30mm [1.626in] Ref.
"E" = 1.640in [41.66mm]
25.40mm
2.000in
1.000in
2.740in
69.60mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
2.625in+-.001.000
66.68mm+ 0.030
Bore
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Base-GK200-H3-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(5) Places on a Bolt Circle"E" = 3.280in [83.31mm]"M" = 82.60mm [3.252in]
Ref.
"E" = 1.640in [41.66mm]
"M" = 41.30mm [1.626in]
A A
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
.00
0
.000
1.5
00
in3
8.1
0m
m
1.6
25
in4
1.2
8m
m
1.9
95
in5
0.6
7m
m
1.000in 25.40mm
1.495in 37.97mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK200-A
Ref.
101.33mm
3.990in
1.490in±.005
37.85mm±0.13
"M" = Slip Fit For 10mm Dowel M12-1.75 Tap X 22mm Dp.(2) Places
1/2"-13 Tap X .88" Dp."E" = Slip Fit For 3/8" Dowel
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
2.000in Ref.
50.80mm
2.990in Ref.
75.93mm
.00
0
.000
1.5
00
in3
8.1
0m
m
1.6
25
in4
1.2
8m
m1.000in 25.40mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK200-A-Machining
"M" = M12-1.75 Tap"E" = 1/2"-13 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .375in "M" = 10.00mm(2) Places
A A
2.63in
Clearance Hole
66.7mm
.00
0
.0001
.46
3in
37
.15
mm
1.6
88
in4
2.8
6m
m
2.0
57
in5
2.2
5m
m.900in 22.86mm
1.495in 37.97mm
Slip Fit For"E" = 1/2" Dowel"M" = 12mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
2.000in Ref.
50.80mm
2.990in Ref.
75.93mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REV 1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING Base-GK200-D3
25.40mm
1.000in
66.652mm
.87in
4.115in
22mm
2.6241in
Ref.
104.51mm
2.125in
53.98mm
.00
0
.000
1.4
63
in3
7.1
5m
m
1.6
88
in4
2.8
6m
m.900in 22.86mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK200-D3-Machining
"M" = M12-1.75 Tap"E" = 1/2"-13 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .500in "M" = 12.00mm(2) Places
A A
2.665in±.010
67.69mm±0.25
Clearance Hole
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Guide Pin GK2051
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
"E" = 5/8"-11 Tap 1.50in Dp."M" = M16-2.0 Tap 38mm Dp.(3) Holes Equallly Spaced on a 1.200in [30.48mm]Bolt Circle
.600in Ref.
15.24mm
2.450in
63.50mm
62.23mm
19.05mm
.750in
3.18mm
.125in
1.000in
25.40mm
.125" Increments
Pin Length
4.250" Min.
14.000" Max.
2.500in
1.9980in
50.749mm
Drill & C'bore For"E" = 5/8" SHCS"M" = M16 SHCS(3) Places Equally Spacedon a 1.200in [30.48mm]Bolt Circle
.600
Ref.
.750
Ref.
2.0000in .0005 X .750in Dp.[ 50.800mm .013 X 19.05mm Dp.]
AA
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REVGuide Pin GK205-Machining
2.810in
71.37mm
4.100in
104.14mm
66.652mm
1.000in
2.6241in
25.40mm
.250in
6.35mm
65.02mm
2.560in
2.125in
53.98mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK205-L3
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(6) Places
"M" = 20.88mm [.822in]
"E" = .833in [21.16mm]
"E" = 1.442in [36.63mm]
"M" = 36.17mm [1.424in]
"E" = 1.665in [42.29mm]
"M" = 41.76mm [1.644in]
2.000in Ref.
50.80mm
*Caution: English & Metric Hole Locations are NOT the Same!
**
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
Base-GK205-L3-Machining1REVDO NOT SCALE DRAWING
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Bore
2.625in- .000
+.001
66.68mm0
+0.03
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(6) Places
"M" = 20.88mm [.822in]
"E" = .833in [21.16mm]
"M" = 36.17mm [1.424in]
"E" = 1.442in [36.63mm]
"M" = 41.76mm [1.644in]
"E" = 1.665in [42.29mm]
A A
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
*
2.810in
71.37mm
4.100in
104.14mm
2.6241in
66.652mm
1.000in
2.560in
25.40mm
.250in
6.35mm
65.02mm
3.125in
79.38mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK205-L4
Clearance Hole"E" = 1/2" SHCS"M" = M12 SHCS(6) Places
"M" = 20.88mm [.822in]
"E" = .833in [21.16mm]
"E" = 1.442in [36.63mm]
"M" = 36.17mm [1.424in]
"E" = 1.665in [42.29mm]
"M" = 41.76mm [1.644in]
2.000in Ref.
50.80mm
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
*
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
Base-GK205-L4-Machining1REVDO NOT SCALE DRAWING
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Bore
2.625in- .000
+.001
66.68mm0
+0.03
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(6) Places
"M" = 20.88mm [.822in]
"E" = .833in [21.16mm]
"M" = 36.17mm [1.424in]
"E" = 1.442in [36.63mm]
"M" = 41.76mm [1.644in]
"E" = 1.665in [42.29mm]
A A
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
*
Clearance Hole
"M" = M12 SHCS"E" = 1/2" SHCS
(5) Flange Clamps onBolt Circle:"E" = 3.280in [83.31mm]"M" = 82.60mm [3.252in]
50.80mm
Ref.2.000in
"E" = 1.640in [41.66mm]
"M" = 41.30mm [1.626in]
25.40mm
1.000in
2.740in
69.60mm
2.6241in
66.652mm
63.48mm
2.499in
9.53mm
.375in25.40mm
1.000in
2.125in
53.98mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK205-H3
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
Use Machining Print for Tapped Hole Location.Flange Clamp Hole May Not be on the Center of the Tap Location on the Downloaded CAD Model.
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
DO NOT SCALE DRAWING Base-GK205-H3-Machining1REV
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
2.625in+-.001.000
66.68mm+ 0.030
Bore
"E" = 1/2"-13 Tap"M" = M12-1.75 Tap(5) Places on a Bolt Circle"E" = 3.280in [83.31mm]"M" = 82.60mm [3.252in]
Ref.
"E" = 1.640in [41.66mm]
"M" = 41.30mm [1.626in]
A A
*Caution: English & Metric Hole Locations are NOT the Same!
*
*
.00
0
.0001
.46
3in
37
.15
mm
1.6
88
in4
2.8
6m
m
2.0
57
in5
2.2
5m
m.900in 22.86mm
1.495in 37.97mm
Slip Fit For"E" = 1/2" Dowel"M" = 12mm Dowel(2) Places
Drilled & C'bored For"E" = 1/2" SHCS"M" = M12 SHCS(4) Places
2.000in Ref.
50.80mm
2.990in Ref.
75.93mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK205-D3
.87in
22mm
4.115in
66.652mm
2.6241in
104.51mm
Ref.
25.40mm
1.000in
2.125in
53.98mm
.00
0
.000
1.4
63
in3
7.1
5m
m
1.6
88
in4
2.8
6m
m.900in 22.86mm
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Base-GK205-D3-Machining
2.665in±.010
67.69mm±0.25
Clearance Hole
"M" = M12-1.75 Tap"E" = 1/2"-13 Tap
(4) Places
Drill & Ream PF for Dowel"E" = .500in "M" = 12.00mm(2) Places
A A
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
REVDO NOT SCALE DRAWING Locking Collar GK2051
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
Drilled & C'bored For"E" = 5/8" SHCS"M" = M16 SHCS(3) Places EquallySpaced on a
1.200in [30.48mm]Bolt Circle
.600in Ref.
15.24mm
2.244in
57mm
1.142in
29mm
"E" = .656in"M" = 17.5mmDrill Thru (3) PlacesEqually Spaced on a
1.200in [30.48mm]Bolt circle
2.0000in .0005 X .750in Dp.
[ 50.800mm .013 X 19.05 Dp.]
.600in Ref.
15.24mm
C C
This product may be covered by one or more patents or
patent applications.
See http://www.standardlifters.com/patents.html for details.
1
Standard Lifters IncStandard Lifters IncStandard Lifters IncStandard Lifters Inc
DO NOT SCALE DRAWING REV Locking Collar GK205-Machining
.750in Ref.
19.05mm
1.181in Ref.
30mm
[57.99mm .05 X 30.00mm Dp.]
2.283in .002 X 1.181in Dp.