1
September 2014 Newsletter GUIDELINE ON MANDATORY SAFETY STANDARDS FOR REPLACEMENT PART OF BRAKE LINING 2013 11-09-14 | Bangkok, The guideline states that replacement part of brake lining that are sold or supplied in Malaysia must conform to the prescribed safety standards and comply with the marking requirements. The safety standards prescribed under this regulation are: Malaysian Standard MS 1164:2005 - Road Vehicles - Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven Vehicles - Specification (First Revision) or; United Nation Economic Commission for Eruope UNECE Regulation 90 - Uniform provisions concerning the approval of replacement brake lining assemblies, drum brake linings and discs and drums for power-driven vehicles and their trailers. Any supplier or offered for supply responsible to ensure replacement part of brake lining supplied or offered for supply shall bear the mark specified in Trade Description (Marking of Replacement Part of Brake Lining) Order 2013. Starting 1 November 2014, only replacement part of brake lining that bear the mark specified in Trade Description (Marking of Replacement Part of Brake Lining) Order 2013 are allowed to be sold in Malaysia. Any replacement parts of brake lining do not bear the mark shall be removed from the market starting 1 November 2014. * Enclosed: Please find the guideline on mandatory safety standards for replacement part of brake lining 2013 TÜV Rheinland Thailand Ltd. 18/F, Tararom Business Tower, 2445/36-38 New Petchburi Road Bangkapi, Huay Kwang, Bangkok 10320 Tel.: +66 2 314-20 1 Fax: +66 2 318-4864 Email : [email protected] TÜV Rheinland Thailand Ltd. Global Technology Assessment Center Bangkok Ladkrabang lndustrial Estate 123/1, Floor 1-2, Soi Chalongkung 31, Lamplatew Sub-district, Ladkrabang District, Bangkok 10520 Tel +66 2 326-1333 Fax +66 2 326-1334-5 TÜV Rheinland Thailand Ltd. Hatyai Branch Office 7, 9, 11, 13, 15 3/F, Chaiyong Building, Room 3 C Juti-Uthit 1 Road, Hatyai, Songkhla 90110 Tel.: +66 74 247-550-2 Fax: +66 74 247-553 www.t uv.co.th Copyright TÜV Rheinland All rights reserved 2013 TÜ V Rheinland Thailand Ltd. All rights reserved. e are pleased to provide limited technical and professional information to our valued customers. owever, this publication does not represent any applicable legal or regulatory requirements and is intended only for educational purposes. It does not constitute consultative or professional advice. DO NOT UOTE ANY INFORMATION EREIN IT OUT TÜV Rheinland s PRIOR RITTEN CONSENT For further information please contact Ms. Kankamon Tongbai < [email protected]> Tel. +66 2 326-1333 ext. 125, 081-583-5532

GUIDELINE ON MANDATORY SAFETY STANDARDS FOR REPLACEMENT ... · PDF fileGUIDELINE ON MANDATORY SAFETY STANDARDS FOR ... Malaysian Standard MS ... Please find the guideline on mandatory

Embed Size (px)

Citation preview

September 2014 Newsletter

GUIDELINE ON MANDATORY SAFETY STANDARDS FOR REPLACEMENT PART OF BRAKE LINING 201311-09-14 | Bangkok,

The guideline states that replacement part of brake lining that are sold or supplied in Malaysia must conform to the prescribed

safety standards and comply with the marking requirements.

The safety standards prescribed under this regulation are:

Malaysian Standard MS 1164:2005 - Road Vehicles - Replacement Brake Lining Assemblies and Drum Brake Linings

for Power-Driven Vehicles - Specification (First Revision) or;

United Nation Economic Commission for Eruope UNECE Regulation 90 - Uniform provisions concerning the approval

of replacement brake lining assemblies, drum brake linings and discs and drums for power-driven vehicles and their

trailers.

Any supplier or offered for supply responsible to ensure replacement part of brake lining supplied or offered for supply shall

bear the mark specified in Trade Description (Marking of Replacement Part of Brake Lining) Order 2013.

Starting 1 November 2014, only replacement part of brake lining that bear the mark specified in Trade Description (Marking of

Replacement Part of Brake Lining) Order 2013 are allowed to be sold in Malaysia. Any replacement parts of brake lining do not

bear the mark shall be removed from the market starting 1 November 2014.

* Enclosed: Please find the guideline on mandatory safety standards for replacement part of brake lining 2013

TÜV Rheinland Thailand Ltd.

18/F, Tararom Business Tower, 2445/36-38 New Petchburi Road Bangkapi, Huay Kwang, Bangkok 10320 Tel.: +66 2 314-2071Fax: +66 2 318-4864Email : [email protected]

TÜV Rheinland Thailand Ltd.

Global Technology Assessment Center Bangkok Ladkrabang lndustrial Estate 123/1, Floor 1-2, Soi Chalongkung 31, Lamplatew Sub-district, Ladkrabang District, Bangkok 10520 Tel +66 2 326-1333 Fax +66 2 326-1334-5

TÜV Rheinland Thailand Ltd.

Hatyai Branch Office 7, 9, 11, 13, 15 3/F, Chaiyong Building, Room 3 C Juti-Uthit 1 Road, Hatyai, Songkhla 90110 Tel.: +66 74 247-550-2 Fax: +66 74 247-553

www.t uv.co.th

Copyright TÜV Rheinland All rights reserved ©2013 TÜ V Rheinland Thailand Ltd. All rights reserved. We are pleased to provide limited technical and professional information to our valued customers. However, this publication does not represent any applicable legal or regulatory requirements and is intended only for educational purposes. It does not constitute consultative or professional advice. DO NOT QUOTE ANY INFORMATION HEREIN WITHOUT TÜV Rheinland’s PRIOR WRITTEN CONSENT

For further information please contact Ms. Kankamon Tongbai

< [email protected]> Tel. +66 2 326-1333 ext. 125, 081-583-5532