GURIT PRODUCT CATALOGUE EMEA Product Catalogue 2 GPC-28-0817 Introduction to Gurit Gurit is renowned as one of the leading global manufacturers and suppliers of composite materials

GURIT PRODUCT CATALOGUEEurope, Middle East and Africa

[email protected]

www.gurit.comVersion 29.1 - January 2018

Cover photo credits: ©Tim Wright, Danish Yachts

GuritEMEAProductCatalogue 2 GPC_EMEA_29.1_0118

Introduction to Gurit Gurit is renowned as one of the leading global manufacturers and suppliers of composite materials

and engineering. Gurit's unique approach integrates structural design, materials science and process

engineering to offer a complete turnkey composite solution.

Gurit offers a combination of innovative, durable, industry-leading composite products with unrivalled

in-house technical expertise, ensuring best-in-class operation wherever it is applied. The versatility

and durability of Gurit's products and in-depth engineering knowledge means every project delivers a

performance that is finely tuned to individual specifications and needs. Gurit's long history of

development and innovation has increased part quality and durability while continual streamlining of

processes have improved productivity and reduced costs.

Gurit offers an impressive portfolio of standardised and customised products suitable for a full range of

requirements, including a comprehensive range of tooling, reinforcement and prepreg materials.

Gurit's patent-approved, award-winning SPRINT™ technology offers lightweight, cost-effective

solutions for a number of applications, reducing production time and cost by up to 60%, and weight by

up to 40%. Gurit® Corecell™ is a leading structural foam core material, which has become widely

accepted for the construction of large, high performance structures.

How to use this Product Catalogue This catalogue has been produced to provide information on our product portfolio. Each individual

product code is categorised as one of the following:

The most cost effective and readily available products will be marked Essentials and Standard.

Gurit is also well served by a network of representatives, who hold stocks of Gurit products locally,

and who can also act as a local point of contact for technical and sales information. A list of these

representatives is given at the end of this publication.

Brief descriptions of each product and product group are given throughout to facilitate product

selection, with full information on any product obtainable from the relevant technical datasheet. These

are available on the Gurit website, www.gurit.com, or by contacting customer support. Contact details

for customer support are given at the end of this publication.

The product catalogue structure is given in the contents page. For placing orders, contact details can

be found at the end of this product catalogue. Written orders may be provided by fax, letter or email.

Please use the order codes provided to ensure that you obtain the correct products.

Some Gurit products are subject to export control restrictions and destinations subject to

trade restrictions. Please contact your local Gurit Customer Support office for details.

ESSENTIALS = manufactured to stock – target dispatch within 3-5 days depending on volume

STANDARD = manufactured to order – target dispatch within 4 weeks depending on volume

SPECIALIST = please contact your local customer support team for product availability

A/F = packaging suitable for air freight For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.


Contents Prepreg & SPRINT™ Materials ................................................................................ 4Fibre Definitions of HEC, IMC, HMC and UHMC............................................................................5

Low Temperature Curing Prepreg & SPRINT™ Materials............................................................6

High Performance Prepreg Materials.............................................................................................13

Aerospace Qualified Prepreg Materials..........................................................................................17

Industrial Prepreg & SPRINT™ Materials......................................................................................18

Prepreg & SPRINT™ Ancillaries.....................................................................................................22

Fire Retardant Materials ......................................................................................... 26Fire Retardant Laminating Systems...............................................................................................27

Fire Retardant SPRINT™ Systems................................................................................................27

Fire Retardant Prepreg Systems.....................................................................................................28

Core Materials ......................................................................................................... 29Introduction.........................................................................................................................................29

Forms of Supply.................................................................................................................................30

Core Materials Range.......................................................................................................................32

Core Kitting.........................................................................................................................................35

Adhesive Systems .................................................................................................. 36Spabond Adhesives..........................................................................................................................36

Smartfuse Adhesives........................................................................................................................36

Liquid & Filled Systems ......................................................................................... 42Laminating Systems..........................................................................................................................43

Infusion Systems...............................................................................................................................47

RTM System.......................................................................................................................................49

Multi-Purpose Systems.....................................................................................................................50

Filling and Fairing..............................................................................................................................53

Tooling Products................................................................................................................................54

Coatings..............................................................................................................................................56

Reinforcements ....................................................................................................... 58Availability...........................................................................................................................................59

Reinforcement Nomenclature..........................................................................................................59

E-Glass Products...............................................................................................................................60

Carbon Products................................................................................................................................61

Ancillary Products .................................................................................................. 62Vacuum Consumables ........................................................................................... 65Contact ..................................................................................................................... 66


Prepreg & SPRINT™ Materials

Gurit’s long history supplying out of autoclave prepregs to the wind energy & marine

industries has allowed Gurit to lead the way by introducing the next generation of

prepregs, specifically designed to make large composite component manufacture

faster, easier and cheaper.

Prepreg Materials

Pre-impregnated materials (prepregs) are reinforcement fibres or fabrics into which a pre-

catalysed resin system has been impregnated by a machine. The resin systems in these

materials react very slowly at room temperature, giving rise to working times of many days or

months. Prepreg resins can only be fully cured by heating them to the prescribed cure

temperature. The accuracy of the machinery used to combine the fabric or fibre with the

resin ensures that laminates produced from prepregs have more consistent and higher fibre

contents than can be achieved by wet lay-up techniques. This allows the use of very tough,

strong resin systems that would be too high in viscosity to be impregnated by hand.

SPRINT™ Materials

SPRINT™ materials consist of a layer of fibre reinforcement either side of a pre-cast, pre-

catalysed resin film with a very lightweight tack film on one face. The material therefore has

the appearance of dry reinforcement, which has resin concealed at its centre. SPRINT™

materials are produced by a process that differs from conventional prepreg so that the fibres

in the reinforcements remain dry and un-impregnated by the resin. SPRINT™ materials are

laid up in a mould and vacuum bagged as for conventional prepreg. However, when the

vacuum is applied, the air transport properties of the dry reinforcement enable air trapped in

the fibre bundles and between layers to be easily removed. When the temperature is then

raised for the cure, the resin film softens and flows into the air-free reinforcement. The void

content of the resultant laminate is extremely low (typically 0-0.5%).

Fibre Definitions of HEC, IMC, HMC and UHMC ..................................................................... 5 Low Temperature Curing Prepreg & SPRINT™ Materials ....................................................... 6 Performance Prepreg & SPRINT™ Materials .......................................................................... 8 High Performance Prepreg Materials ..................................................................................... 13 Aerospace Qualified Prepreg Materials ................................................................................. 17 Industrial Prepreg & SPRINT™ Materials .............................................................................. 18 Prepreg & SPRINT™ Ancillaries ............................................................................................ 22


Fibre Definitions of HEC, IMC, HMC and UHMC

Fibre Description Strength (MPa) Modulus (GPa)

HEC High Elongation Carbon > 4000 227 to 257

IMC Intermediate Modulus Carbon > 4400 275 to 310

HMC High Modulus Carbon > 4300 365 to 405

UHMC Ultra High Modulus Carbon > 4000 420 to 455

Bespoke products are available for high-volume custom applications, where specific variants of width, resin content, fibre weight, tack levels and backers can be requested. For specific enquiries please contact your local customer support representative.

Gurit prepreg product formats are described as one of the following:

1PA – single release paper applied to one side only

1PO – single poly backer applied to one side only

POPA – one poly backer and one paper applied to either side

2DPE – two poly backers applied to each side

S/S – single sided SPRINT™ product

/XXXX – the 2nd reinforcement used in a double sided SPRINT™ e.g. /XC305

/CM – manufactured for cosmetic applications


Low Temperature Curing Prepreg & SPRINT™ Materials

Gurit’s range of low temperature curing prepregs have been developed to allow for the use of cost-effective tooling solutions in the construction of large components.

Product Selector

Format System Main Features Fastest Cure

Recommended Processing Method Max Tg1

Typical Applications

Prepreg SE 70 ¬ Curable at 70°C in thick sections

¬ Available in SPRINT™ and prepreg formats

¬ Range of compatible 70°C curing products

25 mins at 120°C

¬ Autoclave ¬ Press Moulding ¬ Vacuum Bagging

126°C

Sandwich structures with honeycomb, foam and balsa cores

SPRINT™ ST 70

SE 70

SE 70 is a family of hot melt, low temperature (70ºC) cure, epoxy prepreg systems. They have been developed for use in the construction of large components using low energy cure cycles, and have an out-life of 28 days at 21°C. Excellent properties can be achieved at this cure temperature, particularly compressive and interlaminar shear strengths.

ST 70

This is a low temperature (70ºC) cure, SPRINT™ system. Developed for use in the construction of large components using low energy cure cycles, it has an out-life of 21 days at 21°C. Excellent properties can be achieved at this cure temperature, particularly compressive and interlaminar shear strengths. ST 70 is DNV-GL approved for some glass and carbon products. Please contact your customer support representative for more information.


Code Selector Low Temperature Curing Prepreg SE 70

Reinf. Wt (gsm) Width (mm) Resin

Content (%) Format Length (lm) Quantity (m2) Order Code Availability

Unidirectional High Elongation Carbon (HEC)

HEC 200 400 37 POPA 150 60 PP53-2344 STANDARD

HEC 200 400 35 2DPE 200 80 PP53-5948 STANDARD

HEC 300 400 35 POPA 150 60 PP53-4165 SPECIALIST

HEC 300 400 35 2DPE 150 60 PP53-6104 STANDARD

Unidirectional High Modulus Carbon (HMC)

HMC 300 400 33 POPA 150 60 PP53-5783 SPECIALIST

Woven High Elongation Carbon (HEC)

RC200T 194 1270 40 1PO 60 76.2 PP13-3792 STANDARD

RC200T 194 1270 38 2DPE 50 63.5 PP13-5944 STANDARD

RC303T 300 1270 38 1PO 50 63.5 PP13-5541 STANDARD

RC416T 416 1270 40 1PO 40 50.8 PP13-4473 SPECIALIST

RC660T 660 1270 40 2DPE 25 31.75 PP13-6592 SPECIALIST

Stitched Multi-axial High Elongation Carbon (HEC)

XC411 410 1270 42 2DPE 40 50.8 PP23-5716 STANDARD

Stitched Multi-axial E-Glass

QE600 600 1200 42 1PO 25 30 PP21-6035 SPECIALIST

Peel Ply

NPP80 80 1000 50 1PA 100 100 PP15-4245 SPECIALIST

Resin Film

SE 70 Film 0 1270 100 No Carrier 150 190.5 PP00-5809 SPECIALIST

Low Temperature Curing SPRINT™ ST 70

Reinf. Wt

(gsm)

Width (mm)

Resin Content (%) Format Tack

Film Length

(lm) Quantity

(m2) Order Code Availability


RC416T 416 1270 42 S/S No 100 127 SA13-4493 STANDARD

RC416T 416 1270 42 S/S MET STL No 100 127 ST13-7092 SPECIALIST

RC303T/RC303T 600 1270 42 F/S POPA Yes 15 19.05 SA13-4555 SPECIALIST


XC411 410 1270 42 S/S No 25 31.75 SA23-4494 SPECIALIST


QE1200 1200 1200 42 S/S No 10 12 ST21-5613 SPECIALIST






Performance Prepreg & SPRINT™ Materials

Gurit’s range of performance prepregs provide a good balance of mechanical thermal and performance with flexible curing options.

Product Selector


Recommended Processing Method

Max Tg1


Prepreg SE 84LV

¬ Versatile high-strength prepreg system

¬ Curable at 80°C in thick sections

60 mins at 120°C


115°C

High performance light-weight, high-stress structures – round the world yacht hulls and decks

SPRINT™ ST 94

¬ Drape and tackiness optimised for excellent handling

¬ Ideal for complex or vertical mouldings

¬ Excellent balance of mechanical performance and toughness

45 mins at 120°C


115°C

Ideal for large structures where heavyweight materials need to remain in the mould for long durations prior to curing

SPRINT™ ST 95

¬ Good balance of mechanical properties

¬ Dry fabric resin infusion enables efficient air evacuation

¬ Toughened – resistant to micro-cracking

60 mins at 120°C


125°C High volume industrial grade toughened SPRINT™ material

SE 84LV SE 84LV is an exceptionally versatile hot-melt, epoxy prepreg, it can be cured at temperatures as low as 80°C, or it can be used for faster moulding of components at 120°C. This is achieved with an extremely good out-life of up to 56 days at 21°C. SE 84LV is a tough system, and offers excellent mechanical properties on a wide variety of reinforcing fabrics and fibres.

ST 94 ST 94 is a toughened SPRINT™ system offering a good balance of mechanical properties. It comprises of a single layer of reinforcement fabric plied against a resin filmed paper. The resin film has a medium tack that makes it ideal for vertical surface applications. Although moderately tacky, ST 94 can be repositioned once in place without disturbing the underlying single SPRINT™ layers.

ST 95 ST 95 is a toughened SPRINT™ system that offers an extremely good balance of mechanical properties. With a minimum cure temperature of 85°C (with a suitable post-cure), it is ideal for structural components where improved performance and resistance to micro-cracking is desired. ST 95 resin matrix has good flow resistant characteristics that make it stable at room temperature (21°C). The product has a light tack on one side which aids placement in a mould tool. For details of cure schedules, please refer to data sheet.


Code Selector Performance Prepreg

SE 84LV




HEC 150 400 37 POPA 200 80 PC53-4161 ESSENTIALS

HEC 150 400 35 POPA 200 80 PC53-4407 SPECIALIST

HEC 200 400 37 POPA 200 80 PC53-4160 STANDARD




HEC 300 300 32 2DPE 150 60 PC53-7096 SPECIALIST

HEC 300 1200 37 2DPE 40 48 PC53-6473 SPECIALIST


Hybrid - Unidirectional High Elongation Carbon (HEC) with SA 80 Adhesive Film

HEC 300 400 35 SA80/250g 100 40 PC53-4853 SPECIALIST

HEC 300 400 35 SA80/300g 100 40 PC53-6070 SPECIALIST

Unidirectional Intermediate Modulus Carbon (IMC)

IMC 150 400 37 POPA 200 80 PC53-6178 SPECIALIST

IMC 150 400 35 POPA 150 60 PC53-1725 SPECIALIST

IMC 150 400 35 2DPE 200 80 PC53-6185 SPECIALIST

IMC 200 300 37 POPA 250 75 PC53-5635 STANDARD

IMC 300 150 35 POPA 150 22.5 PC53-7072 SPECIALIST

IMC 300 400 35 POPA 150 60 PC53-2306 STANDARD



Unidirectional High Modulus Carbon (HMC)

HMC 150 400 35 POPA 200 80 PC53-1807 SPECIALIST

HMC 150 400 32 2DPE 200 80 PC53-5581 STANDARD



HMC 300 400 33 POPA 150 60 PC53-5690 STANDARD

HMC(M40J) 300 300 32 2DPE 175 52.5 PC53-6389 SPECIALIST






For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information.


SE 84LV




RC200T 194 1270 42 1PO 50 63.5 PC13-2646 ESSENTIALS

RC200P 200 1270 42 1PO 50 63.5 PC13-5801 SPECIALIST

RC303T 300 1270 42 1PO 35 44.45 PC13-2710 SPECIALIST

RC416T 416 1270 40 1PO 25 31.75 PC13-2682 ESSENTIALS

RC660T 660 1270 43.5 2DPE 20 25.4 PC13-4849 STANDARD

RC660T 660 1270 40 1PO 20 25.4 PC13-2693 SPECIALIST


XC150 154 1270 40 1PO 75 95.25 PC23-5252 SPECIALIST

XC305 305 1270 41 1PO 50 63.5 PC23-4362 ESSENTIALS

XC305 305 1270 39 2DPE 50 63.5 PC23-5931 SPECIALIST

XC411 410 1270 40 2DPE 30 38.1 PC23-5708 STANDARD

XC411 410 1270 40 1PO 30 38.1 PC23-1738 ESSENTIALS

XC611 615 1270 40 2DPE 25 31.75 PC23-4891 SPECIALIST

Woven E-Glass and Aramid

RE50P 47 1270 45 POPA 100 127 PC11-6514 SPECIALIST

RE100H4 105 1200 38 2DPE 100 120 PC11-6686 SPECIALIST

RE165T 160 1270 56 POPA 60 76.2 PC11-6771 ESSENTIALS

RE295 292 1240 39 1PO 50 62 PC11-4005 STANDARD

RE301H8D 300 1270 40 POPA 25 31.75 PC11-5901 SPECIALIST

REA390S 390 1200 39 1PO 50 60 PC11-1741 STANDARD


XE603 606 1250 36 1PO 25 31.25 PC21-1747 SPECIALIST

XE905 942 1270 35 1PO 15 19.05 PC21-1748 SPECIALIST

QE1203 1203 1270 35 2DPE 100 127 PC21-1749 SPECIALIST

Peel Ply

NPP80 80 1000 50 1PA 100 100 PC15-1744 ESSENTIALS






Performance Single Sided SPRINT™

ST 94

Reinf. Wt (gsm)

Width (mm)

Resin Content (%) Format Tack

Film Length

(lm) Quantity



RC200T 194 1270 42 S/S No 100 127 SR13-6001 STANDARD

RC200T 194 1270 42 S/S No 50 63.5 SR13-2880 SPECIALIST

RC303T 300 1270 42 S/S No 30 38.1 SR13-2845 STANDARD


RC416T 416 1270 42 S/S No 100 127 SR13-3550 STANDARD





XC305 305 1270 42 S/S No 100 127 SR23-6829 SPECIALIST

XC411 410 1270 42 S/S No 25 31.75 SR23-3134 STANDARD

XC411 410 1270 42 S/S No 100 127 SR23-3134L ESSENTIALS

XC611 615 1270 40 S/S No 125 158.75 SR23-5358 SPECIALIST

XC611 615 1270 42 S/S No 20 25.4 SR23-7126 SPECIALIST

QC800 800 1270 40 S/S No 49 62.23 SR23-6910 SPECIALIST

Woven E-Glass

RE301H8 300 1270 35 S/S No 25 31.75 SR11-5877 SPECIALIST

RE400T 390 1250 52 S/S No 25 31.25 SR11-5820 SPECIALIST

RE400T 390 1250 35 S/S No 25 31.25 SR11-7002 SPECIALIST

WRE581T 580 1250 41 S/S No 25 31.25 SR11-6932 SPECIALIST

WRE581T 580 1250 33 S/S No 25 31.25 SR11-3219 SPECIALIST

WRE850T 850 1250 35 S/S No 16 20 SR11-5431 STANDARD

Stitched Multi-axial Glass and Aramid

XA450 465 1270 46 S/S No 20 25.4 SR22-5298 STANDARD

XE603 606 1255 35 S/S No 60 75.3 SR21-7062 SPECIALIST

XE603 606 1255 48 S/S No 150 188.25 SR21-4558 STANDARD

XE603 606 1255 35 S/S No 60 75.3 SA21-2748 STANDARD

XE905 942 1270 36 S/S No 49 62.23 SR21-5896 SPECIALIST

QE600 600 1200 33 S/S No 50 60 SR21-2518L SPECIALIST



Resin Film

ST 94 Film 0 1160 100 Resin Film No 100 116 SR00-6124 STANDARD


Performance Double Sided SPRINT™

ST 95

Reinf. Wt

(gsm)

Width (mm)

Resin Content

(%) Format Tack

Film Length

(lm) Quantity



RC303T/RC303T 600 1270 51 F/S Yes 15 19.05 SL13-2878 STANDARD

RC416T/XC305 721 1270 56 F/S Yes 13 16.51 SL23-7000 SPECIALIST

RC416T/XC305 721 1270 52 F/S Yes 13 16.51 SL23-4384 STANDARD

RC416T/XC305 721 1270 42 F/S POPA Yes 100 127 SL23-6509 STANDARD

RC416T/XC411 826 1270 52 F/S POPA Yes 100 127 SL23-6511 STANDARD

RC416T/XC411 826 1270 42 POPA Yes 100 127 SL23-6964 SPECIALIST

RC416T/XA450A 881 1270 48 F/S Yes 12.5 15.875 SL22-3775 STANDARD


+45C2/-45C2 422 1270 42 F/S POPA No 30 38.1 SL43-2057 STANDARD

+45E3/-45E3 600 1270 42 POPA Yes 18 22.86 SL41-3199 STANDARD


RE301/RE301 592 1270 36 F/S POPA Yes 15 19.05 SL11-2891 SPECIALIST

RA320/RA320 640 1270 45 F/S POPA Yes 15 19.05 SL12-5300 SPECIALIST

WRE581T/ WRE581T 1160 1250 48 F/S POPA Yes 48 60 SL11-7095 SPECIALIST

WRE581T/ WRE581T 1160 1250 41 F/S POPA Yes 100 125 SL11-2560L STANDARD

WRE581T/ WRE581T 1160 1250 41 F/S POPA Yes 10 12.5 SL11-2560 STANDARD






High Performance Prepreg Materials

Gurit’s range of high performance prepregs offer exceptional benefits for a wide range of applications from rapid component manufacture to high-end cosmetic finishes.

Product Selector




SPRINT ST110 ¬ Car Body Panel

System SPRINT Resin

30 mins at 130°C

¬ Autoclave ¬ Vacuum Bag 115°C

Body and closure panels for automotive applications

Prepreg SC 110(T2)

¬ White spot free high clarity resin for cosmetic parts

¬ Versatile, high strength prepreg resin system

¬ Flexible cure as low as 85°C

20 mins at 150°C

¬ Autoclave ¬ Press Moulding 125°C

Ideal for high visual quality components without white-wash or white spots

Prepreg SC 160

¬ Class leading resin clarity

¬ High temperature performance

15 mins at 160°C

¬ Autoclave ¬ Press Moulding 180°C

Suitable for use in high temperature applications

Prepreg SE 84 Nano

¬ Nano-technology for outstanding mechanicals

¬ Benefits from attributes of SE84LV

60 mins at 120°C


140°C

High compressive property application e.g. very high performance yacht masts and foils

Prepreg Smartcure™

¬ Rapid cure in less than 5 minutes

¬ Ideal for Hot-in Hot-out press moulding manufacture

5 mins at 150°C ¬ Press Moulding 175°C

High volume component manufacture.

ST 110 for Car Body SPRINT™ (CBS) Structural ST 110 is used to form a multi layered material referred to as CBS Car Body SPRINT. It is used alongside a suitable surfacing film (SF80, SF80FROBL or SF96) and SY110 Syntactic Core to build up a CBS panel. The woven carbon and glass reinforcements can be used to lay up various panel combinations to suit the required stiffness and weight targets needed.

For our range of surfacing films and syntactic core materials see Prepreg & SPRINT™ Ancillaries.


SC 110(T2)

SC 110(T2) is ideally suited to achieve visual surface quality. This cosmetic grade prepreg utilize a high clarity, versatile, hot-melt epoxy resin formulation. This specifically developed, unique formulation produces truly white-wash-free parts resulting in increased production output and scrap cost savings of up to 20%. SC 110(T2) can be cured at temperatures as low as 80°C or even faster cures are achievable using press moulding technologies at temperatures up to 150°C. QUV SE Accelerated Weathering Test has revealed that Gurit SC 110(T2) carbon prepreg offers superior weathering performance compared with the current market range.

SC 160

SC 160 are the first choice for perfect visual surface quality. The cosmetic grade prepregs utilize a high clarity, versatile, hot-melt epoxy resin formulation. SC 160 can be cured at temperatures as low as 130°C or even faster cures are achievable using press moulding technologies at temperatures up to 160°C. SC 160 offers class leading resin clarity for a prepreg resin suitable for use in high temperature applications of up to 160°C.

SE 84 Nano

SE 84 Nano is a high performance hot-melt epoxy prepreg. When vacuum bag moulded, SE 84 Nano has a 10% increase in compressive strength compared to SE 84LV through a combination of Gurit proprietary formulation technology and 3M™ Matrix Resin. This marriage of technology delivers a significant boost to mechanical properties with the cure and handling characteristics of SE 84LV.

Smartcure™

Press moulding is the most common production method in the automotive industry to increase production rates for structural and body panel applications to serial production levels. Gurit is assisting this growth by offering prepreg-based products suitable for various press moulding applications. The company has developed a range of prepregs which can be supplied in diverse reinforcement formats that will offer effective deposition rates.

Gurit Smartcure™ is your fastest option for high volume press moulding production of structural automotive components. Cycle times of 5 minutes combined with preforming capability at room temperature and reduced finishing efforts result in increased production output as well as time and cost savings per part. True hot in, hot out processing of the innovative epoxy resin prepregs at steady press temperature guarantees constant part quality and energy savings combined with a good surface finish that is suitable for direct painting with various paints.


Code Selector ST 110

ST 110




RC200T(C) 194 1270 42 S/S 50 63.5 SA13-6158 SPECIALIST

Woven E-Glass

RE400T 390 1250 42 S/S 50 62.5 SA11-6157 SPECIALIST

Cosmetic Prepreg

SC 110(T2)




RC200P 200 1270 40 2DPE/CM 50 63.5 PA13-6404 STANDARD

RC200T 194 1270 40 2DPE/CM 50 63.5 PA13-6860 STANDARD

RC245T 245 1250 40 2DPE/CM 50 62.5 PA13-6355 ESSENTIALS

RC380T 380 1250 40 2DPE 46 57.5 PA13-6425 ESSENTIALS

RC400T 400 1270 40 2DPE/CM 25 31.75 PA13-6567 SPECIALIST

RC430P 430 1200 40 2DPE 25 30 PA13-6427 SPECIALIST

RC600T 600 1250 40 2DPE 25 31.3 PA13-6429 SPECIALIST

RC660T 660 1270 35 2DPE 20 25.4 PA13-6431 STANDARD

Black Pigmented (BL) Woven High Elongation Carbon (HEC)

RC200T 194 1270 40 POPA 50 63.5 PA13-6988 STANDARD


XC305 305 1270 40 2DPE 50 63.5 PA23-6702 SPECIALIST

Stitched Multi-axial Glass

XE603 606 1255 35 2DPE 20 25.1 PA21-6465 STANDARD

SC 160




RC200P 200 1270 40 2DPE/CM 50 63.5 PA13-6444 STANDARD



RC380T 380 1250 40 2DPE 46 57.5 PA13-6412 STANDARD








High Compression Strength Prepreg

SE 84 Nano



Unidirectional Intermediate Modulus Carbon (IMC)


5 Minute Curing Prepreg

Smartcure




HEC 195 1270 39 POPA 50 63.5 PA53-6489 SPECIALIST

HEC(TC35R) 195 1270 39 POPA 50 63.5 PA53-6857 SPECIALIST


RC200P 200 1270 42 POPA 50 63.5 PA13-6784 SPECIALIST



RC380T 380 1250 42 POPA 32 40 PA13-6630 SPECIALIST






Aerospace Qualified Prepreg Materials

Advanced Composite Materials for the Aerospace Industry

Gurit has developed a broad range of strong, light and fire-retardant aerospace materials which are ideally suited for interior or structural components such as passenger and cargo floor panels, cabin linings, ceiling panels, air ducts, plenums, overhead compartments, lavatories, galleys, bars, wardrobes, partitions, seats, flap track and belly fairings, winglets and fins, landing gear doors, trailing edges and brackets.

Gurit offers four resin chemistries:

Chemistry Description

Phenolic Phenolic based chemistry is well established within the aerospace and rail industries where ultimate fire retardant, low smoke emission and low smoke toxicity (FST) properties are required. Phenolic prepregs are therefore commonly used in interior aircraft components such as side walls and flooring.

Epoxy

Gurit has a range of fire-retardant epoxy systems suitable for applications where increased mechanical properties are required. They generally exhibit good flame spread properties and can be used in more structural components compared to phenolics such as flooring panels. Where the optimum blend of FST and mechanical properties is required, Gurit epoxy prepregs also can be co-cured with phenolic prepregs. This is an established approach to the manufacture of aerospace flooring sandwich panels.

Cyanate Ester

Cyanate ester prepregs provide excellent FST properties and can be used in thermally demanding applications due to their high glass transition temperatures (>200oC). Laminates constructed with cyanate ester prepregs demonstrate very low gas permeability and are volatile-free, resulting in low void and porous free components. This together with their excellent FST and high Tg properties make them ideal for air-conditioning ducting construction in aerospace applications.

Benzoxazine

Gurit’s Benzoxazine prepregs represent the next generation of fire-retardant chemistry where similar FST properties to phenolics are required. An advantage of Benzoxazine chemistry is that it is phenol and formaldehyde free meeting the latest environmental standards. Additionally, during cure, Benzoxazine prepregs are volatile-free resulting in low void and porous-free components, therefore eliminating costly reworking processes associated with the manufacture of phenolic-based prepreg components.

For further information on product availability contact your local Gurit sales office.


Industrial Prepreg & SPRINT™ Materials

Gurit’s range of high industrial prepreg products were developed for the cost-effective manufacture of very large structures such as wind turbine blades using heavyweight reinforcements and low-cost chemistry.

Product Selector




Prepreg Sparpreg™

¬ UD prepreg ideal for thick structural sections

¬ Excellent handling & processing properties – no de-bulk

¬ Fully compatible with Gurit SPRINT™ and prepreg products

45 mins at 120°C


125°C

High quality monolithic unidirectional Components that require fast single shot production in thick sections

Prepreg

WE 91-1 ¬ High tack epoxy prepreg 45 mins

at 120°C


125°C

Large Structural components such as wind turbine blade shells and shear webs WE 91-2 ¬ Medium tack epoxy

prepreg

Prepreg WE 92

¬ Medium tack epoxy prepreg

¬ Cost effective for large structures

45 mins at 120°C


125°C

Large Structural components such as wind turbine blade shells and shear webs

SPRINT™ WT 93

¬ Low tack SPRINT™ resin matrix

¬ Dry fabric enables efficient air evacuation

45 mins at 120°C


125°C

Large Structural components such as wind turbine blade shells, shear webs, spars and roots

Sparpreg

SparPreg™ is an advanced UD prepreg, developed to enable to economic manufacture of unidirectional spar caps for more demanding spar designs. SparPreg™ is specifically formulated to produce low void content unidirectional prepreg from vacuum bag only processing.

WE 91-1 / WE 91-2

The WE91 prepreg product range comprises of two tack variants; WE 91-1 high tack and WE 91-2 medium tack prepregs. WE 91 is a high flow epoxy prepreg ideally suited to structural composite component manufacture. It can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute


cure at 120°C. All of this can be achieved together with an out-life of 60 days at 21°C. WE 91-2 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.

WE 92

WE 92 is a high flow epoxy prepreg ideally suited to the manufacture of thick sections. It can be cured at temperatures as low as 85°C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C. All of this can be achieved together with an out-life of 60 days at 21°C.

WT 93

WT 93 is a SPRINT™ resin system that can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120⁰C. All of this can be achieved together with an out-life of 21 days at 21⁰C. WT 93 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.

Gurit’s innovative WT 93 SPRINT™ product range uses a high flow, low tack epoxy prepreg and is ideally suited to the manufacture of thick sections such as turbine blade roots or spars.


Code Selector

Sparpreg




HEC 600 1240 34 2DPE 120 148.8 PA53-5995 STANDARD

HEC 600 400 34 2DPE 110 44 PA53-5513 SPECIALIST

HEC 600 300 34 2DPE 100 30 PA53-6685 SPECIALIST

Unidirectional E-Glass (EGL)

EGL 1600 900 32 2DPE 219 197.1 PA51-4994 STANDARD


RC660T 660 1270 40 2DPE 100 127 PA13-6399 SPECIALIST

WE 91-1



Unidirectional E-Glass (EGL)



EGL 1500 970 32 2DPE 294 285.18 PA51-3987 STANDARD EGL 1600 1000 32 2DPE 219 219 PA51-3989 STANDARD

Woven E-Glass

WRE600/UD90 608 200 35 2DPE 160 32 PA11-4326 STANDARD




Peel Ply

NPP80G 80 1200 50 S/S 100 120 SA15-5053 STANDARD NPP80 80 1200 50 S/S 100 120 SA15-4886 SPECIALIST

NPP80 80 1200 50 1PA 100 120 SA15-6090 SPECIALIST

NPP80 80 1000 50 S/S 50 50 SA15-3087 SPECIALIST

WE 91-2




XE1000 1014 1250 48 2DPE 248 310 PA21-6094 STANDARD

XE603 604 245 45 1PO 125 30.625 PA21-5420 STANDARD

XE603 600 1255 45 POPA 378 474.39 PA21-4096 STANDARD






WE 92




YE1200 1273 1260 43 2DPE 169 212.94 PA21-61601 STANDARD

WT 93




XE603 604 1255 35 S/S 105 131.775 SA21-5224 STANDARD

+45E3/-45E3 600 1270 35 1PO 250 317.5 SA41-4767R STANDARD

QE1174L 1173 1270 41 S/S 75 95.25 SA21-4390 STANDARD 1Includes 50g/m2 Fleece






Prepreg & SPRINT™ Ancillaries

To complement Gurit’s prepreg product range, Gurit also offers co-curable ancillary products including surfacing films, adhesive films, light-weight cores and intensifying pastes.

Product Selector

Format System Main Features Lowest Cure

Recommended Processing Method

Max Tg1


Adhesive Film

SA 70 ¬ Highly toughened resin

matrix ¬ Consistent bond-line

thickness and weight ¬ High strain to failure,

high toughness ¬ Excellent handling and

no mixing required

16 hrs at 70°C


110°C

Co-cure with 70°C prepregs for core and high strength adhesive bonding applications

SA 80 12 hrs at 80°C 100°C

Co-cure with 80°C prepregs for core and high strength adhesive bonding applications

Surface Films

SF 70 ¬ Surface film to generate a resin rich surface

¬ Suitable for sub-surface applications

16 hrs at 70°C ¬ Autoclave

¬ Press Moulding ¬ Vacuum Bagging

90°C Co-cure with 70°C prepregs for resin rich surface

SF 80 12 hrs at 80°C 100°C

Co-cure with 80°C prepregs for resin rich surface

SF 96

¬ Pinhole free surface for easy preparation and application of paint system

10 hrs at 85°C


115°C

Co-cure with 85°C prepregs for resin rich surface ideal for sanding / priming prior to painting

SF 95VH ¬ Silicon carbide filled

film to generate very hard wearing surfaces

10 hrs at 85°C


130°C

Ideal for applications that require a highly toughened system such as car body undertrays

Intensifying Pastes

SP 11100

¬ Co-curable with prepreg systems

¬ Compatibility of handling and processing

¬ Ideal for core splicing and gap filling

16 hrs at 70°C


75°C Core splicing and gap filling with 70°C prepregs

SP 4832 12 hrs at 80°C 100°C

Low density, core splicing and gap filling with 80°C prepregs

SP 9435 12 hrs at 85°C 100°C

Core splicing, prevent bridging and gap filling with 85°C prepregs

Syntactic Core SY 110

¬ Lightweight drapable core material

¬ Co-curable with most Gurit Epoxy Prepregs & SPRINT™

¬ Fast lay-up times ¬ Available at 0.7mm

and 1.0mm thickness

12 hrs at 80°C ¬ Vacuum Bagging 110°C

Produces ultra-light and stiff panels


Adhesive Films

SA 70 is an adhesive film that is designed for secondary bonding, core-bonding and for co-curing with the range of Gurit prepregs. It can be cured at temperatures as low as 70° C, or can be more quickly cured at temperatures above 120°C. The product has an out-life of 28 days.

SA 80 is an adhesive film that is designed for secondary bonding, core-bonding and for co-curing with the range of Gurit prepregs. It can be cured at temperatures as low as 80°C, or can be more quickly cured at temperatures above 120°C. It has an out-life of 56 days at room temperature.

Surface Films

Gurit have a range of surfacing materials specific to a number of applications. SF 70 and 80 are pale green lightweight, sandable films curable at 70°C and 80°C respectively. It provides a pin-hole free surface to all marine mouldings with minimal print-through, onto which a paint finish can be applied.

SF 95VH is a silicon carbide filled surfacing system developed initially for the automotive sector to protect vulnerable underbody components of both GT racing and sports cars which minimises fibre damage from foreign object impacts. For details of cure schedules, please refer to data sheet.

SF 96 is a grey filled epoxy film designed to enhance the surface finish of composite components. Curable at 85°C with a vacuum only process it provides an easy sanding pinhole free surface finish with minimal print through from the underlying laminate. SF 96 provides a stable surface onto which a paint finish can be applied once lightly keyed.

Syntactic Core

SY 110 is a lightweight drapable core material that is designed to be co-curable with most Gurit Epoxy Prepregs & SPRINT™ to produce ultra-light and stiff panels. SY 110 has a wide process window, curing from 85-130ºC. SY 110 is available at 0.7mm and 1.0mm thickness.

Intensifying Pastes

Gurit’s mono-component pastes are pre-catalysed adhesive/filler systems that can be used in conjunction with Gurit prepregs and SPRINT™. They are used as in-situ fillers to bridge corners or tight radii and can also be used as core splicing adhesives. The system range covers black and white variants in high and low densities. Being pre-catalysed system, they require freezer storage for long-term stock holding. Out-life at 21°C is 20 days.


Code Selector Adhesive Films SA 70


Weight (g) Format Length (lm) Quantity (m2) Order Code Availability

SA 70 Film 0 1270 100g No Carrier 100 127 PP00-3640 SPECIALIST

SA 70 Film 0 1270 150g No Carrier 81 102.87 PP00-5549 STANDARD



SA 70 Film 25 1270 150g Scrim 100 127 PP11-3420 STANDARD

SA 70 Film 25 1270 250g Scrim 80 101.6 PP11-2279 STANDARD

SA 70 Film 25 1270 400g Scrim 50 63.5 PP11-2278 STANDARD

SA 80



SA 80 Film 0 1270 100g No Carrier 100 127 PC00-735 SPECIALIST

SA 80 Film 0 1270 150g No Carrier 100 127 PP00-5476 STANDARD

SA 80 Film 0 1270 200g No Carrier 100 127 PC00-1778 SPECIALIST

SA 80 Film 0 1270 250g No Carrier 80 101.6 PC00-4202 STANDARD

SA 80 Film 0 1270 250g No Carrier 300 381 PC00-6437 STANDARD

SA 80 Film 0 1270 300g No Carrier 50 63.5 PC00-2270 STANDARD

SA 80 Film 0 1270 400g No Carrier 50 63.5 PC00-4361 SPECIALIST

SA 80 Film 25 1270 150g Scrim 100 127 PC11-666 ESSENTIALS

SA 80 Film 25 1270 200g Scrim 80 101.6 PC11-669 STANDARD

SA 80 Film 25 1270 250g Scrim 80 101.6 PC11-579 ESSENTIALS

SA 80 Film 25 1270 250g Scrim 20* 25.4 PC11-7022 ESSENTIALS

SA 80 Film 25 1270 300g Scrim 80 101.6 PC11-804 STANDARD

SA 80 Film 25 1270 400g Scrim 50 63.5 PC11-580 SPECIALIST


Black Pigmented (BL) Adhesive Film


SA 80 Film 25 1270 400g Scrim 60 76.2 PC11-6007 SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied

Surfacing Films



SF70 Film 138 1260 150g 2 Scrims 50 63 SC11-4405 SPECIALIST

SF80 Film 138 1255 150g 2 Scrims 80 100.4 SC11-2829 ESSENTIALS

SF80 Film 138 1255 150g 2 Scrims 20* 25.1 SC11-7021 ESSENTIALS

SF96 Film 138 1260 300g 2 Scrims 40 50.4 SA11-7004 STANDARD

SF96 Film 69 1260 700g Scrim 30 37.8 SA11-4587 SPECIALIST

SF95VH Film 50 1270 300g Scrim 50 63.5 SA11-1654 SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied


Syntactic Core Films SY 110

Width (mm)

Resin Weight (g)

Thickness (mm) Format Length (lm) Quantity


SY 110 Film 1270 560 0.7 No Carrier 33 41.9 SA00-4606 SPECIALIST

SY 110 Film 1250 800 1.0 No Carrier 60 37.5 SA00-2691 STANDARD

Intensifying Pastes Size Units Description Order Code Availability

SP 11100 32 x 300 ml SP 11100 RESIN 300ml CARTRIDGE/BOX 32 FY1100-33 SPECIALIST

SP 4832 32 x 300 ml SP4832 RESIN 300ml CARTRIDGE/BOX 32 FX4832-33 STANDARD

SP 9435 32 x 300 ml SP9435 RESIN 300ml CARTRIDGE/BOX 32 FX9435-21 STANDARD






Fire Retardant Materials

Gurit’s range of Fire Retardant (FR) products are designed to deliver high performance laminates whilst meeting demanding fire requirements. The ease of use and processing properties of these systems allow large parts to be manufactured in one operation using vacuum only consolidation.

The FR range is available in a wide variety of formats from ambient curing liquid systems to elevated temperature curing SPRINT™ products. Typical applications include cladding of buildings, interior and exterior train parts, commercial/military craft and fire protection on passenger ferries/superyachts.

Product Selector Format System Main Features Intended

Application Fire Test Standards

Laminating Ampreg 21FR

¬ Range of working times ¬ Capable of ambient only cures ¬ Ideal for wet laminating large

composite structures

Large Civil Structures

BS 476 (Parts 6 & 7) UL94

SPRINT™ ST 91FR

¬ Outstanding compressive properties ¬ Low void content vacuum bag

processing ¬ Controlled flow ¬ Light tack – suitable for use in higher

ambient temperature

Civil Structures ASTM E84 UL94 BS476 Part 7

ST 120FRSBL ¬ 95°C Curable ¬ 120°C Tg ¬ Low smoke formulation ¬ Excellent tack and drape ¬ HL2 in R7 to EN45545

Rail / Industrial / commercial marine craft

EN45545 ASTM E84

Prepreg

SE 120FRSBL

SE 90FRBL

¬ Black tinted resin ¬ Outstanding compressive properties ¬ Controlled flow ¬ Light tack

Civil Structures

Resin Film SA 120FRSBL ¬ 95°C Curable ¬ 120°C Tg ¬ Low smoke formulation ¬ Improves de-moulded surface finish ¬ HL2 in R7 to EN45545

Rail / Industrial / commercial marine craft

EN45545 ASTM E84

Surface Film

SF 120FRSBL

SF 80FROBL ¬ Effect FR layer to epoxy substrates ¬ High gloss black surface finish ¬ Resistant to Moisture ingress

Protection of structural components; engine bays and exhaust runs in marine craft

ISO 5660-1 FMVSS302

Laminating System ................................................................................................................ 27 Prepreg and SPRINT™ ......................................................................................................... 27 Prepreg and SPRINT™ Ancillaries ........................................................................................ 28


Code Selector

Fire Retardant Laminating Systems

Ampreg 21FR Size Units Description Mix Ratio (R:H) Order Code Availability

Individual resin component size

Resin 257 kg AMPREG 21FR RESIN 257KG

F122-005 SPECIALIST

Resin 15.85 kg AMPREG 21FR RESIN 15.85KG F122-004 SPECIALIST

Use the mix ratio to select recommended hardener component size

Standard 18 kg AMPREG21 HARD STD 18KG

100:21 (by weight)

F121-018 STANDARD

Standard 3.33 kg AMPREG21 HARD STD 3.33KG F121-036 STANDARD

Slow 3.33 kg AMPREG21 HARD SLOW 3.33KG F121-037 STANDARD

Extra Slow 18 kg AMPREG21 HARD EXT-SLOW 18KG F121-020 STANDARD

Ultra Slow 900 kg AMPREG 21FR UL-SLOW HARD 900KG 100:18

(by weight)

F122-007 SPECIALIST

Ultra Slow 15.4 kg AMPREG 21FR UL-SLOW HARD 15.4KG F122-006 SPECIALIST

Ultra Slow 15.4 kg AMPREG 21FR UL-SLOW HARD 15.4KG A/F F122-008 SPECIALIST

Fire Retardant SPRINT™ Systems

SPRINT™ Reinf. Wt (gsm)

Width (mm) RC (%) Format Length (lm) Quantity


ST 91FR

XC411 410 1270 42 S/S 150 190.5 SA23-6855 SPECIALIST

WRE581T 580 1250 37 S/S 50 62.5 SA11-6361 SPECIALIST

YE905 911 1270 51 S/S 49 62.2 SA21-5615 SPECIALIST

ST 120FRSBL

RC200T 194 1270 48 S/S 40 50.8 SA13-7009 SPECIALIST

XC411 410 1270 48 S/S 25 31.8 SA23-6944 SPECIALIST

RC416T 416 1270 48 S/S/L 100 127 SA13-6943 SPECIALIST

WRE581T 580 1250 42 S/S 20 25 SA11-6945 SPECIALIST


Fire Retardant Prepreg Systems

Prepreg Reinf. Wt (gsm)

Width (mm) RC (%) Format Length

(lm) Quantity


SE 90FRBL

XC411 410 1270 40 1PO 45 57.15 PG23-5123 SPECIALIST

HEC 450 400 35 POPA 100 40 PG53-5122 SPECIALIST

SE 120FRSBL

HEC 200 300 45 POPA 167 50 PA53-7008 SPECIALIST

Ancillaries Reinf. Reinf.

Wt (gsm)

Width (mm)

Resin Weight (g) Format Length

(lm) Quantity


SA 120FRSBL Scrim 25 1270 250 Resin Film 50 62.8 PA11-6940 SPECIALIST

SF 120FRSBL 2 Scrims 138 1255 200 Surface Film 50 63.5 SA11-6941 SPECIALIST

SF 80FROBL Scrim 25 1270 220 Surface Film 60 76.2 SC00-2243 SPECIALIST

SF 80FROBL 2 Scrims 138 1260 220 Surface Film 50 63 SC11-5341 SPECIALIST






Core Materials

Introduction Cores in a sandwich construction are specified by designers and architects to increase stiffness and reduce the weight of a composite structure. Gurit has a range of core materials to fit any specification or manufacturing process.

Gurit® Corecell™ Gurit® Corecell™ is a structural foam core material using a SAN polymer base featuring high toughness and impact resistant characteristics. Gurit® Corecell™ has become widely accepted for the construction of large, high performance structures. Although originally developed for the marine industry, it is now used in a range of other applications such as wind turbines and sub-sea vessels. Gurit® Corecell™ grades have various type approvals including the American Bureau of Shipping (ABS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Registro Italiano Navale (RINA) and Bureau Veritas (BV). Please check for additional product approvals.

Gurit® PVC Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Other key features include outstanding chemical resistance, low water absorption and excellent thermal insulation capabilities.

Gurit® G-PET™ Gurit® G-PET™ is a highly adaptable, recyclable, thermoplastic foam with a good balance of mechanical properties, temperature resistance, density and cost for a wide range of applications and production processes. Gurit® G-PET™ is approved by Germanischer Lloyd (GL) and American Bureau of Shipping (ABS). Gurit® G-PET™ is approved by Det Norske Veritas (DNV).

Gurit® Kerdyn™ Green Gurit® Kerdyn™ Green is a recyclable, thermoplastic foam produced out of 100% recycled PET with good mechanical properties, temperature resistance and significantly improved resin uptake. Offering a cost efficient solution against higher performance cores, the range will offer both normal and fire retardant densities.

Gurit® Balsaflex™ Gurit® Balsaflex™ is the classic end-grain balsa wood core, featuring highest strength and stiffness to weight ratio of all core materials. Gurit® Balsaflex™ is available in range of densities, thickness and format/finish. Gurit® Balsaflex™ is approved by Germanischer Lloyd (GL) and Lloyd's Register

Introduction.........................................................................................................................................29

Forms of Supply.................................................................................................................................30

Core Materials Range.......................................................................................................................32

Core Kitting.........................................................................................................................................35


Forms of Supply Gurit standard product forms are described below. Gurit can also tailor sheets to your own specification - please call to discuss your requirements.

PL – Plain Sheet – Optimum material properties. Limited bending in-mould.

PH – Plain with Bleeder Holes – Assists air release in vacuum bag processes.

Cuts for conformability (Foam)

Gurit knife cut finish is standard on Gurit® Corecell™ and Gurit® Kerdyn™. Saw cut is standard for Gurit® PVC while knife cut finish on Gurit® PVC is limited. Knife cuts are not visible when the sheets lie flat and these narrow knife-cuts minimize unnecessary resin consumption compared to saw-cut core finishes. Please be advised that cuts are dependent upon the density and thickness of the material. Higher density and thickness materials may need to be saw cut. Maximum sheet size is half of a full-size sheet. Please contact your customer support representative for more information.

SC – Single Cut – Provides flexibility in a single direction on one or both side s of a sheet. If done on both sides, the cuts intersect so no bleeder holes are necessary for vacuum bagging. Max sheet size is half of a full-size sheet.

DC – Double Cut – Provides optimum flexibility in two directions on one or two sides of the sheets. If Double-Cut on both sides, the intersecting cuts make DC a highly effective resin infusion medium. Max sheet size is half of a full-size sheet.

CS – Contour Scrim – Provides optimum flexibility in two directions. Sheets are cut in 30mm squares and bonded to a glass scrim. Available in half sheet size only.


Forms of Supply VIC – Vacuum Infusion Core – There are several VIC options and G urit can customise grooving patterns and bleeder holes as required. For curved laminate sections, double-sided DC is very effective system for resin infusion with low weight gain. Heat-forming VIC surface cut also useful for obtaining curved panels with minimal resin uptake.

Product Formats (Balsa)

Gurit® Balsaflex™ is available plain or with typical formats including perforations, microgrooves, with or without scrim, contour scrim and with optional coating.

Other Product Formats

Bead and Cove - Bead and cove strip planking aids the building of large, curved structures, in a mouldless build method.

Fillet strips – Triangular edge strips to create tapered panel edge drop-offs, or stringer base fillets.

Kits – Gurit has an extensive kitting capability to provide all the formats described here in customized, numbered, ready to use, CNC machined kits.


Core Materials Range Gurit® Corecell™ M

Gurit® Corecell™ M is the next generation of Gurit® Corecell™. Combining high static properties, high toughness and compatibility with infusion and prepreg processes. Gurit® Corecell™ M benefits from American Bureau of Shipping (ABS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Registro Italiano Navale (RINA) and Bureau Veritas (BV) certification.

Gurit® Corecell™ S

Gurit® Corecell™ S has been developed primarily to resist hydrostatic pressures in sub-sea applications. It is manufactured in two densities, and buoyancy modules can therefore be designed to depths up to 1100 metres (averages). Gurit® Corecell™ S is only available in full thickness.

Gurit® Corecell™ T

Gurit® Corecell™ T is the lightest density Corecell™ foam available. T400 provides improved compressive strength over M60 and is better suited for thin skinned laminates. Gurit® Corecell™ T has ABS, GL, and DNV certification.

Gurit® G-PET™

Gurit® G-PET™ is a highly adaptable, recyclable, thermoplastic foam with a good balance of mechanical properties, temperature resistance, density and cost for a wide range of applications and production processes. Gurit® G-PET™ has GL certification.

Gurit® Kerdyn™ Green - New core to be released through 2017

Gurit® Kerdyn™ Green and Gurit® Kerdyn™ Green FR are both 100% recycled PET foam, offering a wide range of densities and significantly improved resin uptake performance. The latest product range is currently under DNV-GL certification.

Gurit® PVC

Gurit® PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Gurit® PVC has DNV certification. The Gurit® PVC range also offers HT60 and HT80 with high temperature processing up to 140°C.

Gurit® Balsaflex™

Gurit® Balsaflex™ is the classic high quality end-grain balsa wood core. Rigid panels are available in higher thickness, flexible panels are available up to 55mm. Large flexible panels with 1220 x 1220mm are also available. Gurit® Balsaflex™ has GL certification.


Code Selector Gurit® Corecell™

Corecell Short Edge Marking Nominal Density

Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

Gurit® Corecell™ M available from the Gurit ECCC site in Germany

M60 Yellow + Green 65 1285x1285 1285x2605 3-50 ESSENTIALS

M80 Yellow + Blue 85 1220x1220 1220x2440 3-50 ESSENTIALS

M100 Yellow + Black 107.5 1130x1130 1130x2275 3-48 ESSENTIALS

M130 Yellow + Light Brown 140 1015x1015 1015x2045 3-40 ESSENTIALS

M200 Yellow + Brown 200 915x915 915x1830 3-30 ESSENTIALS

Gurit® Corecell™ Tavailable from the Gurit site in Magog (Canada)

T400 White + Green 71 1285x1285 1285x2605 3-53 ESSENTIALS

T500 White + Blue 94 1195x1220 1195x2440 3-40 ESSENTIALS

Gurit® Corecell™ Savailable from the Gurit site in Magog (Canada)

S1200 Red + Brown 210 890x890 890x1830 21-24 SPECIALIST

S1800 Red + Mauve 315 785x785 785x1600 16-21 SPECIALIST

Gurit® G-PET™

Core Type Short Edge Marking Nominal Density

Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

G-PET available from the Gurit site in Tianjin (China)

80 Brown + Yellow 80 1005/1220x1220 1005/1220 x 2440 3-245 ESSENTIALS

90 Brown + Orange 94 1005/1220x1220 1005/1220 x 2440 3-245 ESSENTIALS

100 Brown + Green 104 1005/1220x1220 1005/1220 x 2440 3-245 ESSENTIALS

110 Brown + Blue 114 1005/1220x1220 1005/1220 x 2440 3-245 ESSENTIALS

135 Brown + Grey 135 1005/1220x1220 1005/1220 x 2440 3-245 ESSENTIALS

200 Brown + Black 200 1005/1220x1220 1005/1220 x 2440 3-245 ESSENTIALS

G-PET FR available from the Gurit site in Tianjin (China)

75 Blue + Yellow 75 1005/1220x1220 1005/1220 x 2440 3-245 SPECIALIST

100 Blue + Green 100 1005/1220x1220 1005/1220 x 2440 3-245 SPECIALIST

G-PET LITE available from the Gurit site in Tianjin (China)

Comment : LITE being available in all densities but only supplied in thickness range 10-150mm (3/8-6 inches)

Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for more information


Gurit® Kerdyn™ Green


Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

Gurit® Kerdyn™ Green available from the Gurit sites in Volpiano and ECCC

80 Blue 80 1005 x 1220 1005 x 2440 5-200 ESSENTIALS

100 Green 100 1005 x 1220 1005 x 2440 5-200 ESSENTIALS

115 Black 115 1005 x 1220 1005 x 2440 5-175 ESSENTIALS

135 Black + Green 135 1005 x 1220 1005 x 2440 5-150 ESSENTIALS

150 Orange 150 1005 x 1220 1005 x 2440 5-135 ESSENTIALS

200 Black + Yellow 200 1005 x 1220 1005 x 2440 5-100 ESSENTIALS

250 Black + Blue 250 1005 x 1220 1005 x 2440 5-80 ESSENTIALS

Gurit® Kerdyn™ Green FR available from the Gurit sites in Volpiano and ECCC

80 Blue + Red 80 1005 x 1220 1005 x 2440 5-200 SPECIALIST

115 Black + Red 115 1005 x 1220 1005 x 2440 5-175 SPECIALIST

180 Brown + Red 180 1005 x 1220 1005 x 2440 5-110 SPECIALIST

Gurit® PVC and PVC HT


Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

Gurit® PVC

40 Azure 40 945 x 1330 1330 x 2850 3-84 ESSENTIALS

48 Lilac 48 910 x 1270 1270 x 2730 3-80 ESSENTIALS

60 Yellow 60 1150 x 1120 1150 x 2450 3-78 ESSENTIALS

80 Green 80 1020 x 1080 1020 x 2180 3-72 ESSENTIALS

100 Red 100 950 x 1020 950 x 2050 3-68 ESSENTIALS

130 Blue 130 850 x 950 850 x 1900 3-58 ESSENTIALS

200 Brown 200 - 750 x 1600 3-48 ESSENTIALS

250 Green 250 - 700 x 1500 3-47 ESSENTIALS

Gurit® PVC HT

HT60 Pink 60 1120 x 1200 1120 x 2400 3-78 ESSENTIALS

HT80 Light Yellow 80 1005 x 1070 1005 x 2150 3-75 ESSENTIALS

Gurit® Balsaflex™


Half Sheet Size

Nominal Sheet Size

Unbonded Thickness

Range Availability

kg/m3 mm mm mm

Gurit® Balsaflex™ available from the Gurit site in Equador

110 Written 110 1220x1220 1220x1220 1220x1220

610x1220 6.35-55 ESSENTIALS

150 Written 155 610x1220 6.35-55 ESSENTIALS

220 Written 220 610x1220 6.35-55 ESSENTIALS


Core Kitting Core kitting by Gurit offers the following benefits to customers:

¬ Reduced labour time

¬ Reduced waste levels

¬ High level of accuracy

¬ Improved overall quality

Wherever they are in the world, Gurit provides a local kitting service to its industrial and marine customers. Using either 5-Axis, or 3-Axis CNC machines, along with a range of semi-automatic machines and manual tools, the company’s full range of core materials - Gurit- Corecell™, Gurit® Kerdyn™, Gurit® PVC or Gurit® Balsaflex™ - can be converted into customised, labelled and ready-to-use kits, based on the customer’s drawings or 3D model.

Gurit has developed specific knowledge and experience of correct flute and clearance angles to provide optimum cutting conditions. This allows for quick cutting to minimise cost, accurate cutting for component dimensions, and fine cutting to allow the best nesting routines, so maximising yield rates and minimising waste.

Gurit stocks its range of core materials in each region, reducing the lead-time to supply cost-effective and flexible kitting solutions to meet every customer’s requirements.


Adhesive Systems

Spabond Adhesives

Spabond adhesives offer outstanding performance in high-stress, high-load applications for Marine, Wind Energy and Civil Engineering applications.

¬ Spabond 300 Series: structural, high dynamic load applications

¬ Spabond 500 Series: specialist substrate and applications

¬ Spabond 700 Series: for aesthetic carbon laminate applications

Smartfuse Adhesives

Smartfuse high performance industrial adhesives offer a range of working and fixture times when bonding multiple / dissimilar substrates for Automotive, Transportation, Industrial, Construction applications.

¬ Smartfuse Epoxy: high-modulus adhesive for structural applications

Gurit adhesive systems product descriptions may contain the following nomenclature:

S/S – straight sided metal pail for mixing machine extrusion and automated dispense

Please note: A suitable mixing method is required to mix and dispense Spabond™ adhesives. For our range of dispense guns and mix heads, please refer to the Ancillary Products section.


Adhesives Selector Guide

System Description Hardener Mix Ratio Working Time Clamp Time* Sag Max

Temp

Spabond™ 300 Series: structural, high dynamic load applications

Spabond™ 335

Toughened gap filling epoxy adhesive system.

Fast (Black) 2:1

(by volume)

10 - 30 mins 3 - 6hrs

5mm 65°C Slow (Grey) 1 – 2hrs 8 – 9hrs

Extra Slow 6 – 10hrs 10 – 25hrs

Spabond™ 340LV HT

High strength, rubber toughened, fast dispense. Uses: Industrial, wind energy and marine.

Fast (Red)

2:1 (by volume)

20 – 40mins 2 – 5hrs

20 – 25mm 68°C Slow (Purple) 1 - 2hrs 10 – 20hrs

Extra Slow (Blue) 2.5 – 6hrs 15 – 35hrs

Spabond™ 345

Highly sag resistant. Uses: highest performance marine projects

Fast (Black) 2:1

(by volume)

20 – 40mins 3 – 8hrs 15 –

30mm

75°C

Slow (Red) 2 - 3hrs 7 – 16hrs 85°C

Extra Slow (Blue) 3 – 6hrs 10 – 25hrs 80°C

Spabond™ 500 Series: specialist substrate and applications

Spabond™ 5 Minute `Tacking and secondary bonding. 1:1

(by volume) 90 seconds 15 mins 10 - 15mm 55°C

Spabond™ 540 Spabond™ 540LV

High elongation, long bonding times.

Fast (Red)

1:1 (by volume)

30 - 40mins 2 – 5hrs

20 – 30mm

56°C

Standard (Purple) 1 – 2hrs 10 – 20hrs 58°C

Low viscosity resin option for easier application.

Slow (Green) 3 – 6hrs 20 – 30hrs 52°C

Extra Slow (Blue) 6.5hrs tbc tbc

Spabond™ 568 Core bonding adhesive 2:1

(by volume) 5 – 6 hrs 24 hrs 10mm 65°C

Spabond™ 570

Easy mixing/smooth spreading. Bonds all woods

1:1 (by volume) 90 mins 10 - 15 hrs 10 -

20mm 55°C

Spabond™ 700 Series: rapid structural adhesives

Spabond™ 730

High strength, rapid curing. General purpose adhesive.

1:1 (by volume) 3 – 5 mins 1 – 2 hrs 10 -

15mm 60°C

Smartfuse™ Epoxy: industrial adhesive range

E1009

Bonds multiple substrates found in general applications. Ideal for cross-market applications - Automotive, Transportation, Industrial, Construction

1:1 (by volume) 10 mins 1 hr

0.2 - 20mm

50°C

E2025

2:1 (by volume)

25 mins 5 hrs 63°C

E2090 90 mins 10 hrs 61°C

E2350 350 mins 13 hrs 58°C

*clamp time is determined as the time to reach a cleavage strength of 2kN

Please note: A suitable mixing method is required to mix and dispense Spabond™ adhesives. For our range of dispense guns and mix heads, please refer to the Ancillary Products section.


Code Selector

Spabond™ 300 Series: structural, high dynamic load applications

Spabond™ 335 Size Units Description Mix Ratio (R:H) Order Code Availability

Resin 20 kg SP335 RESIN 20KG F644-032 STANDARD

Fast 9.2 kg SP335 HARD FAST 9.2KG 100:46 (by weight) F644-039 STANDARD

Standard 8.8 kg SP335 HARD STD 8.8KG 100:44 (by weight) F644-036 STANDARD

Extra-slow 8.4 kg SP335 HARD X-SLOW 8.4KG 100:42 (by weight) F644-037 STANDARD

Spabond™ 340LVHT Size Units Description Mix Ratio

(R:H) Order Code Availability

Resin and hardener pack sizes

HT Fast Pack 400 ml SP340LV R/HF-HT 400ml CART/BOX OF 20

F645-094 STANDARD

HT Fast Pack 900 ml SP340LV-R/HF-HT 900ml CART/BOX OF 10 F645-046 STANDARD

HT Slow Pack 400 ml SP340LV R/HSL-HT 400ml CART/BOX OF 20 F645-095 STANDARD

HT Slow Pack 900 ml SP340LV-R/HSL-HT 900ml CART/BOX OF 10 F645-048 STANDARD

HT Extra-slow 400 ml SP340LV R/HXS-HT 400ml CART/BOX OF 20 F645-096 STANDARD

HT Extra-slow 900 ml SP340LV-R/HXS-HT 900ml CART/BOX OF 10 F645-069 STANDARD


Resin 200 kg SP340LV RESIN 200KG

F645-049 ESSENTIALS

Resin 20 kg SP340LV RESIN 20KG F645-053 ESSENTIALS

Resin 20 kg SP340LV RESIN 20KG S/S F645-054 STANDARD


HT Fast 200 kg SP340 HARD FAST (HT) 200KG 100:49

(by weight)

F645-080 STANDARD

HT Fast 20 kg SP340 HARD FAST (HT) 20KG F645-078 STANDARD

HT Fast 10 kg SP340 HARD FAST (HT) 10KG F645-097 ESSENTIALS

HT Slow 200 kg SP340 HARD SLOW (HT) 200KG 100:49

(by weight)

F645-071 STANDARD

HT Slow 20 kg SP340 HARD SLOW (HT) 20KG F645-072 STANDARD

HT Slow 10 kg SP340 HARD SLOW (HT) 10KG F645-098 ESSENTIALS

HT Extra-slow 200 kg SP340 HARD EX-SLOW (HT) 200KG 100:47

(by weight)

F645-083 STANDARD

HT Extra-slow 20 kg SP340 HARD EX-SLOW (HT) 20KG F645-081 STANDARD

HT Extra-slow 10 kg SP340 HARD EX-SLOW (HT) 10KG F645-099 STANDARD








Fast Pack 400 ml SP345 R/HF 400ml CART/BOX 20

F646-016 STANDARD

Black Fast Pack 400 ml SP345 R/HFBL400ml CART/BOX 20 F646-024 STANDARD

Slow Pack 400 ml SP345 R/HSL 400ml CART/BOX 20 F646-014 STANDARD


Resin 20 kg SP345 RESIN 20KG F646-038 ESSENTIALS

Resin 20 kg SP345 RESIN 20KG S/S F646-047 STANDARD


Fast 20 kg SP345 HARD FAST 20KG 100:48

(by weight)

F646-049 STANDARD

Fast 9.6 kg SP345 HARD FAST 9.6KG F646-041 ESSENTIALS

Black Fast 9.6 kg SP345 HARD FAST BLACK 9.6KG F646-042 STANDARD

Slow 20 kg SP345 HARD SLOW 20KG 100:48 (by weight)

F646-048 STANDARD

Slow 9.6 kg SP345 HARD SLOW 9.6KG F646-043 ESSENTIALS

Extra-slow 9.6 kg SP345 HARD EX-SLOW 9.6KG 100:48 (by weight) F646-044 STANDARD

Spabond™ 500 Series: specialist substrate and applications

Spabond™ 5 Minute Size Units Description Mix Ratio

(R:H) Order Code Availability


Pack 400 ml SP 5-MIN.ADH.R/H 400ml CARTRIDGE/BOX 20 F652-021 STANDARD

Resin 310 ml SP 5-MIN.ADH.RES.310ml N/ PIGCART/BOX 20 F652-025 SPECIALIST

Hardener 310 ml SP 5-MIN.ADH.HARD.310ml N/PIGCART/BOX 20 F652-027 SPECIALIST



Resin 17.5 kg SP568 RESIN 17.5KG F654-023 ESSENTIALS

Resin 10 kg SP568 RESIN 10KG (15.1L) F654-021 STANDARD


Hardener 7.7 kg SP568 HARD EXTRA-SLOW 7.7KG 100:44 (by weight)

F654-024 ESSENTIALS

Hardener 4.4 kg SP568 HARD EXTRA SLOW 4.4KG/7.6L F654-022 STANDARD

For our range of dispense guns and mix heads, please refer to the Ancillary Products section.








Fast Pack 600 ml SP540LV R/HF 600ml CART/BOX OF 12

F648-044 STANDARD

Standard Pack 600 ml SP540LV R/HSTD 600ml CART/BOX OF 12 F648-045 STANDARD




LV Resin 20 kg SP540LV RESIN 20KG F648-013 STANDARD

LV Resin 20 kg SP540LV RESIN 20KG S/S F648-050 STANDARD


Fast 19.0 kg SP540 HARD FAST 19.0KG 100:95 (by weight)

F648-010 STANDARD

Fast 19.0 kg SP540 HARD FAST 19.0KG S/S F648-043 STANDARD

Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG 100:92

(by weight)

F648-022 STANDARD

Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG S/S F648-009 STANDARD

Standard 184 kg SP540 HARD STD 184KG F648-033 STANDARD

Slow 18.6 kg SP540 SLOW HARDENER 18.6KG 100:93

(by weight)

F648-030 STANDARD

Slow 18.6 kg SP540 SLOW HARDENER 18.6KG S/S F648-051 ESSENTIALS

Slow 186 kg SP540 SLOW HARDENER 186KG F648-038 STANDARD

Extra-slow 18.2 kg SP540 HARD EXTRA SLOW 18.2KG 100:91 (by weight)

F648-048 STANDARD




Resin 20 kg SP570 RESIN 20KG S/S F640-023 STANDARD



Hardener 20 kg SP570 HARD STANDARD 20KG 100:100

(by weight)

F640-022 STANDARD

Hardener 20 kg SP570 HARD STANDARD 20KG S/S F640-024 STANDARD

Hardener 5 kg SP570 HARD STANDARD 5KG F640-020 STANDARD







Spabond™ 700 Series: rapid structural adhesives



Pack 400 ml SP730 R/H 400ml CART/BOX 20 F650-007 STANDARD

Smartfuse™ Epoxy Series: rapid structural adhesives



Pack 400 ml SMARTFUSE E1009 R/H 400ml CART/BOX 12 F651-002 STANDARD

Pack 400 ml SMARTFUSE E2025 R/HF 400ml CARTS/BOX 12 F655-004 STANDARD

Pack 400 ml SMARTFUSE E2090 R/HSL 400ml CARTS/BOX 12 F655-005 STANDARD

Pack 400 ml SMARTFUSE E2350 R/HXS 400ml CARTS/BOX 12 F655-006 STANDARD


E1 Resin 20 kg SMARTFUSE E1 RESIN 20KG S/S F651-003 SPECIALIST

E2 Resin 20 kg SMARTFUSE E2 RESIN 20KG S/S F655-007 SPECIALIST


E1009 Hard 20 kg SMARTFUSE E1009 HARD 20KG S/S 1:1 (by weight) F651-004 SPECIALIST

E2025 Hard 20 kg SMARTFUSE E2025 HARD 20KG S/S 2:1

(by weight)

F655-008 SPECIALIST

E2090 Hard 20 kg SMARTFUSE E2090 HARD 20KG S/S F655-009 SPECIALIST

E2350 Hard 20 kg SMARTFUSE E2350 HARD 20KG S/S F655-010 SPECIALIST







Liquid & Filled Systems

Gurit is a leading supplier of high performance epoxy products formulated to meet market and customer needs.

Gurit’s innovative approach and expertise in epoxy formulations continues to deliver market leading products for a wide range of market segments. Gurit provides a complete range of formulated products from in-mould gelcoats to multi-purpose systems.

Laminating Systems ............................................................................................................... 43 Infusion Systems .................................................................................................................... 47 RTM System .......................................................................................................................... 49 Multi-Purpose Systems .......................................................................................................... 50 Filling and Fairing ................................................................................................................... 53 Tooling Products .................................................................................................................... 54 Coatings ................................................................................................................................. 56


Laminating Systems

The Ampreg wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy.

Product Selector

System Description Hardener Speed Mix ratio Intended Application

Ampreg 21 Good wet out; low by-product and good through cure

Fast 1-2 hrs

100:33 (parts by weight)

General purpose

Standard 2-3 hrs

Slow 6-7 hrs

Extra Slow 7-10 hrs

Ampreg 22 Good wet out; low by-product; good Tg generation

Fast 1-2 hrs

100 : 28 (parts by weight)

Medium to large mouldings

Standard 2-3 hrs

Slow 6-7 hrs

Extra Slow 7-10 hrs

14 hour 14 hrs

Ampreg 26

Premium laminating system with high mechanical properties and high Tg

Fast 1-2 hrs 100:33

(parts by weight)

High performance large mouldings Slow 7 hrs

Ultra Slow 8-10 hrs

Ampreg F230-1

3 component expanding epoxy system good for gap filling with consistent foam density

Slow Fully foamed less than 1 hr, Cure time varies with geometry


Rudder foils, crash bars

Extra Slow

Ampreg Thixotropic Pregel

Resin additive with a grease-like consistency, used primarily as a thixotrope - to be added to low viscosity laminating resins for applications where resin drainage is a concern.

Refer to product datasheet

Refer to product datasheet. Compatible systems: ¬ Ampreg 21 ¬ Ampreg 22 ¬ Ampreg 26

Vertical and overhead laminating situations, particularly where heavy, open weave fabrics are being used

Ampreg Adhesion Promoter

A unique resin system formulated to promote the adhesion between epoxy and vinylester resin

Ampreg Adhesion Promoter for use with Ampreg 21, 22, and 26.


Existing polyester gelcoats with higher performance epoxy resins supplied by Gurit.


Code Selector Laminating Systems

Ampreg 21 Size Units Description Mix Ratio (R:H) Order Code Availability


Fast Pack 3.6 kg AMPREG21 R/H FAST 3.6KG PACK

F121-011 STANDARD

Fast Pack 1.33 kg AMPREG21 R/H FAST 1.33KG PACK F121-032 STANDARD

Standard Pack 3.6 kg AMPREG21 R/H STD 3.6KG PACK F121-012 STANDARD


Slow Pack 3.6 kg AMPREG21 R/H SLOW 3.6KG PACK F121-013 STANDARD


Extra-slow Pack 3.6 kg AMPREG21 R/H EXT-SLOW 3.6KG PACK F121-014 STANDARD


Resin 1000 kg AMPREG21 RESIN 1000KG

F121-016 STANDARD

Resin 216 kg AMPREG21 RESIN 216KG F121-015 ESSENTIALS

Resin 20 kg AMPREG21 RESIN 20KG F121-002 STANDARD


Resin 2.7 kg AMPREG21 RESIN 2.7KG F121-001 STANDARD


Fast 165 kg AMPREG21 HARD FAST 165KG


F121-021 STANDARD

Fast 18 kg AMPREG21 HARD FAST 18KG F121-017 STANDARD

Fast 18 kg AMPREG21 HARD FAST 18KG A/F F121-056 STANDARD

Fast 6.66 kg AMPREG21 HARD FAST 6.66KG F121-004 STANDARD




F121-022 STANDARD

Standard 18 kg AMPREG21 HARD STD 18KG F121-018 STANDARD



Slow 165 kg AMPREG21 HARD SLOW 165KG


F121-023 STANDARD

Slow 18 kg AMPREG21 HARD SLOW 18KG F121-019 ESSENTIALS

Slow 18 kg AMPREG21 HARD SLOW 18KG A/F F121-060 STANDARD



Extra-slow 165 kg AMPREG21 HARD EXT-SLOW 165KG 100:33

(parts by weight)

F121-024 STANDARD

Extra-slow 18 kg AMPREG21 HARD EXT-SLOW 18KG F121-020 STANDARD

Extra-slow 6.66 kg AMPREG21 HARD EXT-SLOW 6.66KG F121-010 STANDARD









F118-020 STANDARD

Standard Pack 5 x 1 kg AMPREG22 R/H STD 5x1KG PACK F118-059 STANDARD


Standard Pack 4.23 kg AMPREG22 R/H STD CLEAR 4.23KG PACK F118-083 STANDARD

Standard Pack 1 kg AMPREG22 R/H STD 1KG PACK BOXED F118-072 STANDARD




F118-009 ESSENTIALS






100:28 (by weight)

F118-030 STANDARD






100:28 (by weight)

F118-050 STANDARD





Slow 900 kg AMPREG22 HARD SLOW 900KG

100:28 (by weight)

F118-051 STANDARD Slow 180 kg AMPREG22 HARD SLOW 180KG F118-036 ESSENTIALS

Slow 18 kg AMPREG22 HARD SLOW 18KG F118-065 ESSENTIALS

Slow 5.6 kg AMPREG22 HARD SLOW 5.6KG F118-075 ESSENTIALS


Extra-slow 900 kg AMPREG22 HARD EXT-SLOW 900KG

100:28 (by weight)

F118-031 STANDARD













F116-033 STANDARD




F116-036 STANDARD




100:33 (by weight)

F116-037 STANDARD

Fast 18 kg AMPREG26 HARD FAST 18KG A/F F116-043 STANDARD


Fast 6.66 kg AMPREG26 HARD FAST 6.66KG A/F F116-042 STANDARD

Slow 180 kg AMPREG26 HARD SLOW 180KG 100:33

(by weight)

F116-030 STANDARD

Slow 18 kg AMPREG26 HARD SLOW 18KG F116-038 STANDARD


Foaming Epoxy System

F 230-1 Size Units Description Mix Ratio (R:H) Order Code Availability


Resin 14.5 kg AMPREG F230-1 RESIN 14.5KG F113-007 STANDARD

Individual hardener component size (includes Foaming Agent)

Slow Pack 3.53 kg AMPREG F230-1 HARD SLOW 3.53KG PACK A/F

100:23 (by weight) F113-008 STANDARD

Additional Foaming Agent if Required

Foaming Agent 0.2 kg AMPREG F230-1 FOAMING AGENT 0.2KG See datasheet FY8912-30 SPECIALIST

Ampreg Thixotropic Pregel

Ampreg TP Size Units Description Mix Ratio (R:H) Order Code Availability

Resin 193 kg AMPREG TP RESIN 193KG Refer to product datasheet. Compatible systems: ¬ Ampreg 21 ¬ Ampreg 22 ¬ Ampreg 26

F120-009 STANDARD

Resin 20 kg AMPREG TP RESIN 20KG F120-008 STANDARD

Ampreg Adhesion Promoter

Ampreg AP Size Units Description Mix Ratio (R:H) Order Code Availability

Pack kg AMPREG ADHESION PROMOTER 20KG 100:28 (by weight) F119-002 STANDARD






Infusion Systems

The PRIME™ infusion system from Gurit has been used successfully for the single-operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and wind turbine blades. PRIME™ infusion resin has a much reduced viscosity and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation.

PRIME™ epoxy infusion systems are at the forefront of the development of liquid epoxies for "under the bag" infusion processes, such as SCRIMP™, RIFT (resin infusion under flexible tooling), and VARTM (vacuum assisted resin transfer moulding).

Product Selector


PRIME™ 27

Low viscosity, good mechanical properties, very low exotherm in thick sections

Fast 20 mins

100:28 (parts by weight) Suitable for the

female moulding of large complex components

Slow 1 hr

Extra Slow 4 hrs

High Tg 3 hrs 20 mins 100:25 (parts by weight)


Code Selector

Infusion Systems

PRIME™ 27 Size Units Description Mix Ratio (R:H) Order Code Availability


Resin 1000 kg PRIME27 RESIN 1000KG

F160-043 ESSENTIALS

Resin 214 kg PRIME27 RESIN 214KG F160-041 ESSENTIALS

Resin 18.6 kg PRIME27 RESIN 18.6KG F160-057 STANDARD


Fast 900 kg PRIME HARD FAST 900KG

100:28 (by weight)

F160-072 STANDARD

Fast 180 kg PRIME HARD FAST 180KG F160-018 STANDARD

Fast 19 kg PRIME HARD FAST 19KG F160-068 ESSENTIALS

Fast 5.2 kg PRIME HARD FAST 5.2KG F160-053 STANDARD

Slow 900 kg PRIME HARD SLOW 900KG

100:28 (by weight)

F160-045 STANDARD

Slow 180 kg PRIME HARD SLOW 180KG F160-032 ESSENTIALS

Slow 19 kg PRIME HARD SLOW 19KG F160-069 ESSENTIALS

Slow 5.2 kg PRIME HARD SLOW 5.2KG F160-054 STANDARD

Extra-slow 900 kg PRIME HARD EX-SLOW 900KG

100:28 (by weight)

F160-033 STANDARD

Extra-slow 180 kg PRIME HARD EX-SLOW 180KG F160-028 STANDARD

Extra-slow 19 kg PRIME HARD EX-SLOW 19KG F160-070 ESSENTIALS

Extra-slow 5.2 kg PRIME HARD EX-SLOW 5.2KG F160-055 STANDARD

High Tg 178 kg PRIME HIGH Tg HARDENER 178KG 100:25

(by weight)

F160-089 STANDARD

High Tg 17.6 kg PRIME HIGH Tg HARDENER 17.6KG F160-088 STANDARD

High Tg 8.8 kg PRIME HIGH Tg HARDENER 8.8KG F160-087 STANDARD

ULV Slow 13.95 kg PRIME ULV HARD SLOW 13.95KG 100:28 (by weight)

F160-074 STANDARD

ULV Slow 3.8 kg PRIME ULV HARD SLOW 3.8KG F160-075 STANDARD






RTM System

PRIME™ 180 High Tg Resin RTM System

PRIME™ 180 is a two-component toughened epoxy system specifically developed for RTM production of high-quality structural carbon components such as wheel rims, tubs, and structural parts. Low viscosity at low temperatures enables convenient manufacture of complex or thick section laminates. Following a post cure to 180°C, PRIME™ 180 features a good level of clarity which allows for carbon cosmetic finishes to be achieved directly from moulding. Coated with UV-resistant lacquer ensures long-term UV stability of the finished parts where required.

Code Selector

Prime™ 180 Size Units Description Mix Ratio (R:H) Order Code Availability

Resin 200 kg PRIME180 RESIN 200KG 1:1 (by weight)

F168-002 STANDARD

Resin 20 kg PRIME180 RESIN 20KG F168-001 SPECIALIST

Hardener 200 kg PRIME180 HARDENER 200KG

F168-004 STANDARD

Hardener 20 kg PRIME180 HARDENER 20KG F168-003 SPECIALIST






Multi-Purpose Systems

The Ampreg wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy.

Product Selector


Handipack

Multi-purpose epoxy, supplied only in a small pack. It is designed for quick repair work and small scale construction jobs.

Handipack 15 mins 100:50

(parts by volume)

Laminating, coating or as an adhesive or filling compound.

SP 106

All-purpose epoxy which can be used for gluing, coating, laminating and filling

Fast 15 mins


Clear coating for wood and other substrates, or for laminating.

Slow 20 mins

Extra Slow 35 mins

SP 115 Low viscosity, UV stable high clarity laminating system

115 30 mins 100:33

(parts by weight)

Surfboards, Clear parts

SP 320

Solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to.

Fast 15 mins 100:33

(parts by weight)

Coating wood to provide a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish.

Slow 30 mins

Eposeal 300

Solvent-based, low viscosity epoxy primer with an extremely low viscosity which ensures that the product achieves rapid and deep penetration of porous surfaces.

EP 300 - 100:30 (by weight)

Developed primarily for use on wood but can also be used on other materials such as GRP, stone, ferrocement, brick, etc.


Code Selector Handipack Multi-purpose Epoxy System Handipack Size Units Description Mix Ratio (R:H) Order Code Availability

Resin 10 litres HANDIPACK R/H+PUMPS 375ml, BOX OF 5 2:1 (by volume) F520-011 STANDARD

SP106 Multi-purpose Epoxy System SP 106 Size Units Description Mix Ratio (R:H) Order Code Availability


Fast Pack 3.02 kg SP106 RES/HARD FAST 3.02KG PACK

F510-041 STANDARD

Fast Pack 5 x 1 kg SP106 RES/HARD FAST 5x1KGPACK F510-037 STANDARD

Slow Pack 3.02 kg SP106 RES/HARD SLOW 3.02KG PACK F510-042 STANDARD

Slow Pack 5 x 1 kg SP106 RES/HARD SLOW 5x1KGPACK F510-038 STANDARD


Resin 1000 kg SP106 RESIN 1000KG

F510-034 STANDARD



Resin 10 kg SP106 RESIN 10.0KG F510-004 STANDARD


Fast 19.5 kg SP106 HARD FAST 19.5KG 100:18

(parts by weight)

F510-020 STANDARD

Fast 3.6 kg SP106 HARD FAST 3.6KG F510-018 STANDARD

Fast 1.8 kg SP106 HARD FAST 1.8 KG (0.9x2) F510-019 STANDARD

Slow 180 kg SP106 HARD SLOW 180KG


F510-033 STANDARD

Slow 19.5 kg SP106 HARD SLOW 19.5KG F510-032 STANDARD

Slow 3.6 kg SP106 HARD SLOW 3.6KG F510-053 ESSENTIALS

Slow 1.8 kg SP106 HARD SLOW 1.8KG (0.9x2) F510-031 STANDARD

Extra-slow 19.5 kg SP106 HARD EXTRA-SLOW 19.5KG 100:18 (parts by weight)

F510-047 STANDARD

Extra-slow 3.6 kg SP106 HARD EXTRA-SLOW 3.6KG F510-052 STANDARD

SP115 UV Stable, High Clarity Epoxy System SP 115 Size Units Description Mix Ratio (R:H) Order Code Availability


Pack 5 x 1 kg SP115 RES/HARD BOX 5x1KG PACK

F110-017 STANDARD

Pack 5 kg SP115 RESIN/HARD 5KG PACK F110-020 STANDARD



F110-024 STANDARD



Hardener 16.5 kg SP115 HARD 16.5KG 100:33 (parts by weight)

F110-025 STANDARD

Hardener 6.66 kg SP115 HARD 6.66KG F110-026 STANDARD






SP 320 Multi-purpose Epoxy Coating System

SP 320 Size Units Description Mix Ratio (R:H) Order Code Availability

1. Available resin and hardener pack sizes

Pack 5 x 1 kg SP320 RES/HARD FAST 5x1KGPACK

F505-024 STANDARD

Pack 5 x 1 kg SP320 RES/HARD SLOW 5x1KGPACK F505-025 STANDARD

Pack 4 kg SP320 RESIN/HARD FAST 4KG PACK F505-028 STANDARD

Pack 4 kg SP320 RESIN/HARD SLOW 4KG PACK F505-029 STANDARD





Fast Hardener 6.66 kg SP320 HARD FAST 6.66KG

100:33 (by weight)

F505-038 STANDARD

Fast Hardener 20 kg SP320 HARD FAST 20KG F505-036 STANDARD

Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG F505-039 STANDARD

Slow Hardener 20 kg SP320 HARD SLOW 20KG F505-037 STANDARD

Eposeal 300 Wood Coating

Eposeal 300 Size Units Description Mix Ratio (R:H) Order Code Availability

Pack 5 x 1 litres SP300 EPOSEAL RES&HARD 5x1L PACKS 100:30 (by weight)

F705-013 STANDARD

Pack 5 litres SP300 EPOSEAL RES&HARD 5L PACK F705-012 STANDARD






Filling and Fairing

Gurit’s filling and fairing systems for the finishing of component manufacture, offer a range of working times, good sandability and compatibility with a wide range of primers. S-Fill 15 Minute Epoxy Filler System Gurit’s S’Fill 15 Minute Filler is an epoxy filler system designed for rapid cure at ambient temperature, to allow sanding without clogging at just over an hour after application. As well as rapid cure and good sandability, the system has been developed to offer ease of dispense and mixing, good sag resistance during application, good cured properties. The system offers a simple 1:1 mix ratio, high levels of adhesion, low shrinkage and good thermal and mechanical properties.

S-Fair 600 Epoxy Fairing System S-Fair 600 is a simple 1:1 by volume, two component filler designed for filling and fairing large composite and metal structures such as hulls and decks. It can be applied up to a thickness of 35mm on a vertical surface. It is easy to sand and is compatible with a wide range of primers and top coats typically used in the marine market for the finishing of yachts. It is available with two hardeners; Fast and Standard, which enables the customer to tailor the working/cure time to the ambient workshop temperature.

Code Selector S-Fill 15 Minute Epoxy Filler System

S-Fill 15 Min Size Units Description Mix Ratio (R:H) Order Code Availability

Pack 2 litres S FILL 15 MIN. RES&HARD 2L PACK F930-006 STANDARD

S-Fair 600 Size Units Description Mix Ratio (R:H) Order Code Availability


Resin 10 litres S FAIR 600 RESIN 10L

F920-003 SPECIALIST Resin 2.5 litres S FAIR 600 RESIN 2.5L F920-001 STANDARD


Fast 10 litres S FAIR 600 FAST HARDENER 10L 1:1 (by volume)

F920-110 SPECIALIST Fast 2.5 litres S FAIR 600 FAST HARDENER 2.5L F920-111 STANDARD

Standard 10 litres S FAIR 600 STD HARDENER 10L 1:1 (by volume)

F920-004 SPECIALIST Standard 2.5 litres S FAIR 600 STD HARDENER 2.5L F920-002 STANDARD






Tooling Products

As the technical leaders in commercial composite materials, Gurit offers a complete range of composite tooling products.

Gurit's tooling product range consists of a tooling paste designed for pattern manufacture and a range of ambient curing mould materials that can be used up to an operating temperature of 160°C.

Product Selector

Type Product Operating Temperature Description

Tooling Pastes T-Paste 70-2 85°C

T-Paste 70-2 has been designed for customers looking for a fast and reliable way to manufacture patterns and direct moulds. T-Paste 70-2 combined with CNC technology allows more design freedom and improves pattern/direct mould accuracy whilst reducing production processes.

Please note: A mixing machine is required to mix and dispense the T-Paste 70-2 product. For more information on suitable mixing machines, please contact Gurit.

Gelcoats T-Gel 130-1 130°C

T-Gel 130-1 is an epoxy gelcoat system for manufacturing glass or carbon reinforced mould tools. T-Gel 130-1 is compatible with Gurit’s range of 130⁰C / 265⁰F tooling laminating, infusion and repair materials.

Laminating Systems T-Lam 130-1 130°C

T-Lam 130-1 is an epoxy tooling system designed for wet laminating glass or carbon moulds. T-Lam 130-1 is compatible with T-Prime 130-1.

Infusion Resin T-Prime 130 130°C T-Prime 130-1 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds. It is compatible with T-Lam 130-1 laminating.

Infusion Resin T-Prime 160 160°C T-Prime 160 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds.


Code Selector

Tooling Pastes

T-Paste 70-2 Size Units Description Mix Ratio (R:H) Order Code Availability

Resin 190 litres T-PASTE 70-2 RESIN 190L 100:100 (by volume)

F940-122 SPECIALIST Hardener 190 litres T-PASTE 70-2 HARDENER 190L F940-123 SPECIALIST

Please note: A mixing machine is required to mix and dispense the T-Paste 70-2 product. For more information on suitable mixing machines, please contact Gurit.

Gelcoats

Laminating Systems

T-Lam 130-1 Size Units Description Mix Ratio (R:H) Order Code Availability

Resin 20 kg T-LAM 130-1 RESIN 20KG 100:40 (by weight)

F140-202 STANDARD

Hardener 8 kg T-LAM 130-1 HARDENER 8KG F140-205 STANDARD

Infusion Systems

T-Prime 130-1 Size Units Description Mix Ratio (R:H) Order Code Availability


Resin 185 kg T-PRIME 130-1 RESIN 185KG

F163-100 STANDARD

Resin 12.5 kg T-PRIME 130-1 RESIN 12.5KG F163-102 STANDARD


Hardener 16.7 kg T-PRIME 130-1 HARD 16.7KG 100:27 (by weight)

F163-106 STANDARD

Hardener 3.4 kg T-PRIME 130-1 HARD 3.4KG F163-103 STANDARD

T-Prime 160 Size Units Description Mix Ratio (R:H) Order Code Availability


Resin 200 kg T-PRIME 160 RESIN 200KG

F166-003 STANDARD

Resin 20 kg T-PRIME 160 RESIN 20KG F166-005 STANDARD


Hardener 180 kg T-PRIME 160 HARDENER 180KG 100:35 (by weight)

F166-009 STANDARD

Hardener 17.5 kg T-PRIME 160 HARD 17.5KG A/F F166-008 STANDARD

T-Gel 130-1 Size Units Description Mix Ratio (R:H) Order Code Availability

Pack 7.6 kg T-GEL130-1 RES&HARD 7.6KG PACK 100:49 (by weight) F340-112 STANDARD






Coatings

Gurit’s range of coating epoxies is the foundation of our formulated products business, specifically to meet the needs of the wooden boat builder/restorer, Gurit's comprehensive range of products is as popular today as when it was first introduced.

Our coating products are hard wearing and versatile partners for the multi-purpose systems. Available in both solvent and solvent-free formulations, coatings are suitable for a range of applications, including osmosis treatment, priming, top coating and varnishing.

Product Selector


CR 3400

Easy to sand, in-mould epoxy surfacing system for epoxy laminates and is designed to be used as the base for the subsequent application of a paint scheme.

Standard 5 hours 100:30

(parts by weight)

Designed to be backed up with Ampreg laminating systems and Prime infusion systems to give a sand-able surface ready for painting.

SP 115 Low viscosity, UV stable high clarity laminating system 115 30 mins


Surfboards, Clear parts

SP 320

Solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to.

Fast 15 mins 100:33

(parts by weight)

Coating wood to provide a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish.

Slow 30 mins


Code Selector

CR 3400 In-mould Process Coat

CR 3400 Size Units Description Mix Ratio (R:H) Order Code Availability

Resin 19 kg CR3400 RESIN 19KG 100:30 (by weight)

F346-013 ESSENTIALS

Hardener 5.7 kg CR3400 HARD STD 5.7KG F346-015 ESSENTIALS

SP115 High Clarity Epoxy System SP 115 Size Units Description Mix Ratio (R:H) Order Code Availability


Pack 5 x 1 kg SP115 RES/HARD BOX 5x1KG PACK

F110-017 STANDARD

Pack 5 kg SP115 RESIN/HARD 5KG PACK F110-020 STANDARD



F110-024 STANDARD



Hardener 16.5 kg SP115 HARD 16.5KG 100:33 (parts by weight)

F110-025 STANDARD

Hardener 6.66 kg SP115 HARD 6.66KG F110-026 STANDARD

SP 320 Multi-purpose Epoxy Coating System

SP 320 Size Units Description Mix Ratio (R:H) Order Code Availability

1. Available resin and hardener pack sizes

Pack 5 x 1 kg SP320 RES/HARD FAST 5x1KGPACK

F505-024 STANDARD

Pack 5 x 1 kg SP320 RES/HARD SLOW 5x1KGPACK F505-025 STANDARD

Pack 4 kg SP320 RESIN/HARD FAST 4KG PACK F505-028 STANDARD

Pack 4 kg SP320 RESIN/HARD SLOW 4KG PACK F505-029 STANDARD





Fast Hardener 6.66 kg SP320 HARD FAST 6.66KG

100:33 (by weight)

F505-038 STANDARD

Fast Hardener 20 kg SP320 HARD FAST 20KG F505-036 STANDARD

Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG F505-039 STANDARD

Slow Hardener 20 kg SP320 HARD SLOW 20KG F505-037 STANDARD






Reinforcements

Gurit supplies an extensive range of reinforcements suitable for composite component manufacture and repair. These materials are based on the most widely used fibre types and fibre orientations and incorporate a variety of construction techniques in their manufacture.

Our range of Reinforcements is presented by fibre type:

¬ Glass Products – E Glass

¬ Carbon Products

¬ Hybrid combinations of the above fibres

Then sub-divided into the following categories, based on the orientations of the primary structural fibres / tows :

¬ Unidirectional Fabrics – A variety of construction styles with all structural fibres generally running at 0° where optimum mechanical properties or local reinforcement is required. The Style is generally Unitex (‘UT’) which offers a balance of handling properties.

¬ Woven Fabrics – A wide range of woven fabrics, available in plain, twill and satin weave formations with fibres at 0°/90°.

¬ Multiaxial Fabrics – Stitched construction with fibres at +/-45° or 0°/90° (Double Bias), 0°/+45°/-45° (Triaxial) and 0°/+45°/-45°/90° (Quadraxial). These products offer excellent mechanical properties, and have optimised fibre spread for high laminate quality.

¬ Tapes – Narrow (< 200mm) fabric versions of the above Availability .............................................................................................................................. 58 Reinforcement Nomenclature ................................................................................................ 58 E-Glass Products ................................................................................................................... 59 Carbon Products .................................................................................................................... 60


Availability The supply of dry reinforcements is subject to a minimum single roll quantity per style for most items. Smaller quantities of fabric are available from Gurit’s network of distributors, subject to cutting and handling charges.

This catalogue describes Gurit’s standard range of reinforcement materials. If your preferred reinforcement is not listed in the following pages, please contact Gurit, as we can offer alternative weaves, weights, fibres and fibre combinations in most styles. Non-standard items may be subject to limited availability. Width availability may change from time to time.

For further information, confirmation of stock levels and technical advice on Gurit’s reinforcement materials - please contact your local Customer Support Team.

Reinforcement Nomenclature 1st Letter:

General Construction of Reinforcement Fabric

WR = Woven rovings - (glass)

R = Woven fabric - yarn (glass) or tows (carbon)

X = Double bias (±45°) stitched fabric

Q = Quadraxial (0°/90°/±45°) stitched fabric

Y = Triaxial (0°/±45°) stitched fabric

UT = Unitex woven low-crimp unidirectional fabric

UF = Unifibre non-woven unidirectional fabric

2nd Letter: Fibre Type (or Major Component in Hybrid)

E = E glass

S = S glass (or R glass)

C = Carbon

3rd letter:

2nd Fibre Type - Minor Component in Hybrid (as above);

also: (when present) T = Tape version

Final digit: Identifier to distinguish otherwise similar fabrics.

Suffix letter: For woven fabrics, the following suffixes indicate the weave:

P = Plain

T = 2x2 twill

S = 3x1 twill

T4 = 4x4 twill

Hx = Satin (where x = harness number)

C = Crowsfoot

B = Basket

Q = Quadran

Example:

UT-C300/500

UD carbon in Unitex

Nominal weight 300g/m2

Width 500mm


Code Selector E-Glass Products Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability

Uni-directional Reinforcement Fabrics

UT-E250 500 200 100 m2 R161-015 SPECIALIST

UT-E500 500 100 50 m2 R161-021 SPECIALIST

0/90° Woven Yarn

RE86P 1050 100 105 m2 R111-008 ESSENTIALS

RE100H4 1200 105 126 m2 R111-019 SPECIALIST

RE125P 800 100 80 m2 R111-013 SPECIALIST

RE165T 1270 105 133.35 m2 R111-203 ESSENTIALS

RE210D 1300 106 137.8 m2 R111-120 ESSENTIALS

RE290T 1240 100 124 m2 R111-098 SPECIALIST

RE295H4 1240 105 130 m2 R111-113 ESSENTIALS

RE301H8D 1270 100 127 m2 R111-117 SPECIALIST

RE400T 1250 106 133 m2 R111-197 SPECIALIST

0/90° Woven Roving Yarn

WRE581T 1250 50 62.5 m2 R111-116 ESSENTIALS

±45° Double Bias Stitched Fabrics

XE304 1270 100 127 m2 R121-190 SPECIALIST

XE451 1270 85 107.95 m2 R121-187 SPECIALIST

XE603 1255 50 62.75 m2 R121-014 ESSENTIALS XE905 1270 40 50.8 m2 R121-018 SPECIALIST

0/90/±45° Quadraxial Stitched Fabrics

QE624 1270 60 76.2 m2 R121-151 SPECIALIST

QE1174 1270 35 44.4 m2 R121-153 SPECIALIST

0/90° Woven Tapes

RET160 50 50 3 roll R111-053 SPECIALIST

RET160 100 50 5 roll R111-055 SPECIALIST

±45° E-Glass Tapes

XET300 125 50 6 roll R121-056 SPECIALIST

XET601 140 50 7 roll R121-060 SPECIALIST

E-Glass / Aramid Hybrid Products - subject to Export Control Legislation

Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability


REA390S 1200 105 126 m2 R211-004 SPECIALIST






Carbon Products EXPORT CONTROL RESTRICTIONS

Please be advised that for shipments of dry carbon outside of the European Union, an Export Licence may be required.

Description Width (mm) Length (lm) Quantity (m2) Order Units Order Code Availability


UT-C200 500 150 75 m2 R163-039 SPECIALIST

UT-C300 500 125 62.5 m2 R163-040 ESSENTIALS



0/90° Woven Reinforcements

RC200T 1270 100 127 m2 R113-134 ESSENTIALS

RC203P* 1270 105 133.35 m2 R113-114 SPECIALIST

RC303T 1270 105 133.35 m2 R113-128 ESSENTIALS

RC416T 1270 50 63.5 m2 R113-083 ESSENTIALS

RC660T 1270 50 63.5 m2 R113-127 SPECIALIST

+ 45° Double Bias Stitched Fabrics

XC302 1270 100 127 m2 R123-090 SPECIALIST

XC411 1270 100 127 m2 R123-006 ESSENTIALS

XC611 1270 50 63.5 m2 R123-068 SPECIALIST

Unidirectional Reinforcement Tapes

RUCT300P 100 50 5 Roll R163-107 SPECIALIST

RUCT500P 50 50 2.5 Roll R163-054 SPECIALIST

RUCT500P 100 50 5 Roll R163-057 SPECIALIST

±45° Double Bias Stitched Tapes

XCT411 140 50 7 Roll R123-019 SPECIALIST

*powder coated






Ancillary Products

In order to assist in the use of the wide range of materials manufactured and supplied by Gurit, a range of Ancillary Products are also available. These have been refined over many years to enable users to handle products safely and to obtain the very best results from Gurit materials. The Ancillary Products are grouped together into three main categories:

Filler Powders A range of filler powders which are designed to modify the properties of some of the Gurit liquid solvent-free resin systems, and so create resin mixes for use as fillers and adhesives. The fillers form three distinct categories: hollow spheres, short fibres, and flow modifiers.

Hollow spheres Increase the volume and reduce the density of any resin system and are used to make adhesive mixes and filling & fairing mixes.

¬ Microballoons: Brown microsphere filler powder used to make glues or paste fillers.

¬ Glass Bubbles: White microsphere filler powder used to make glues or paste fillers.

Short Fibres For adding strength to a resin and hardener mix used as a structural adhesive, short reinforcing fibres are often added which act in a similar strengthening way to the long reinforcing fibres used in composite construction.

¬ Microfibres: Cellulose fibres used to make adhesive mixes.

Flow Modifiers The most common material for modifying the flow properties of a resin mix is colloidal silica. This is a very fine powder which is added in conjunction with other fillers to ‘thicken’ mixes and reduce their flow on vertical surfaces (increase thixotropy).

¬ Colloidal Silica: Fine, anti-sag, filler powder. Use in combination with other filler powders.

Solvents A range of solvents for cleaning tools and surfaces. Due to the very different chemistry of some of the Gurit products from each other, it is important that the correct solvents are selected for the intended application.

Pigments A range of pigments that can be added to some Gurit products to adjust the colour / visual appearance. Please contact Gurit Technical Support for further guidance on the correct usage / addition of pigments which can vary by product.

Application, Processing and Sundry items Pumps and dispense equipment, application and processing items and pigments.


Code Selector

Filler Powders

Description Approximate Volume Size Units Order Code Availability

Hollow spheres

MICROBALLOONS 0.3KG 3 litres 0.3 kg A225-003 STANDARD

MICROBALLOONS 5KG 50 litres 5 kg A225-005 STANDARD

MICROBALLOONS 12KG 120 litres 12 kg A225-007 STANDARD

GLASS BUBBLES 0.12KG 1 – 1.5 litres (min order 5) 0.12 kg A230-005 STANDARD

GLASS BUBBLES 0.12KG 2 - 3 litres 0.3 kg A230-001 STANDARD

GLASS BUBBLES 0.12KG 30 - 50 litres 5 kg A230-003 STANDARD

Short Fibres

MICROFIBRES 0.5KG 5 litres 0.5 kg A215-003 STANDARD

MICROFIBRES 5KG 50 litres 5 kg A215-005 STANDARD

MICROFIBRES 10KG 100 litres 10 kg A215-008 STANDARD

Flow Modifies

COLLOIDAL SILICA 0.25KG 5 litres 0.25 kg A220-003 STANDARD

COLLOIDAL SILICA 2.5KG 50 litres 2.5 kg A220-005 STANDARD

COLLOIDAL SILICA 10KG 200 litres 10 kg A220-006 STANDARD

Fillers

GRAPHITE POWDER (501) 0.75KG - 0.75 kg A235-001 STANDARD

Cleaning Solvents

Description Application Size Units Order Code Availability

SP FAST EPOXY SOLVENT 5L Surface degreaser 5 litres A105-003 SPECIALIST

SP STD EPOXY SOLVENT 5L By-product remover 5 litres A108-003 SPECIALIST

Please note, Gurit’s solvent-free epoxies such as SP 106, Ampreg 22 should never have solvent added to them to ‘thin them down’. If a lower viscosity, thinner epoxy product is required then this should be achieved by gentle warming of the product, or warming the surface to which the product is applied. Note that any extra heat applied will also accelerate the product’s rate of cure. Alternatively, there may be a different Gurit epoxy product with a more suitable viscosity for the intended application. For the correct solvent for a given application, please see the resin systems data sheet for details.

Pigments

Description Colour Size Units Order Code Availability

SP PIGMENT WHITE 0.5KG White 0.5 kg A445-002 STANDARD

SP PIGMENT BLACK 0.5KG Black 0.5 kg A445-004 STANDARD






Code Selector Continued Spabond™ Dispensing Equipment

Mix-heads and guns not available for individual 310ml single component cartridges.

Volume Description Size Units Order Code Availability

Dispense Guns

900ml Pneumatic / PC Cox Gun, PPA 1 EACH K215-039 STANDARD

600ml Pneumatic / PC Cox Gun, PPA 300A 1 EACH K215-050 STANDARD

400ml* Manual / Metix Gun DM400-01 1 EACH K215-021 STANDARD

400ml* Pneumatic / Metix Gun DM400-85-01 1 EACH K215-022 STANDARD

Cartridge Mix Heads

900ml Box of 20 x 16mm, 20 Element round mix head (screw connection) 1 EACH A640-021 STANDARD

600ml Box of 20 x 10.7mm, 19 Element square mix head (screw connection) 1 EACH A640-019 STANDARD

400ml* Box of 20 x 10.7mm, 19 Element square mix head (screw connection) 1 EACH A640-019 STANDARD *Suitable for 1:1 and 2:1 cartridge formats

Smartfuse™ Dispensing Equipment

Volume Description Size Units Order Code Availability

Dispense Guns

400ml 2:1 / 1:1 7029678 400ml 2K DISP SYS PNEU 1 EACH A640-028 SPECIALIST

400ml 2:1 / 1:1 7029676 400ml 1:1 MANUAL DISP. SIDE LOAD 1 EACH A640-025 SPECIALIST

Cartridge Gun Mix Heads

400ml MIX HEAD SMARTFUSE 10mm/18EL /BAG 20 1 EACH A640-024 SPECIALIST

Application, Processing and Sundry items

Description Comments Size Units Order Code Availability

Miscellaneous Dispense Equipment

10cc Syringe* 1cc graduations 1 EACH A660-001 SPECIALIST

50cc Syringe* 10cc graduations 1 EACH A660-002 SPECIALIST

25 litre Drum Tap Small plastic 1 EACH K342-005 SPECIALIST

200 litre Drum Tap Large plastic 1 EACH K342-010 SPECIALIST

Plastic Mini-pump Pair Mini-pump pair for any 1kg pack 1 EACH K216-318 STANDARD

Pump Sets Please contact Gurit Customer Support for pump set availability

Application and Processing Items

Reusable Mixing Pots 0.5L (0.8L max) Minimum order of 100 1 EACH A640-013 STANDARD

Clear lid for Mixing Pots For use with A640-013 1 EACH A640-014 STANDARD

Mixing Sticks Box of 100 sticks 1 EACH A640-004 SPECIALIST

* Syringes should be washed with warm water and a mild detergent, then flushed with clean water and allowed to air dry before use.






Vacuum Consumables

The range of vacuum consumables has been designed for use in a wide range of vacuum bag processes. Such processes include autoclave/ prepreg curing, wet lay-up, low temperature oven/ prepreg processes and infusion processes. Gurit has selected a specific range of products which are particularly suitable for working with Gurit's epoxy prepreg and laminating systems where they are regularly used for the curing of large composite structures at temperatures up to 150°C.

Sealant Tapes Sealant tape is used to seal the tool to the vacuum bag in order to provide an airtight seal. The tapes are tacky to ensure a positive seal is achieved against a variety of tool surfaces.

Peel Plies Peel plies are fine weave fabrics which are applied to the laminate stack to provide a clean, contaminant-free textured surface, suitable for secondary bonding, filling or painting. Our range is green in colour.

Release Films Release films are used to separate and release the laminate from the vacuum stack following the cure of the component. These films are perforated to allow a certain bleed of resin from the laminate into a breather material such as Econoweave 44W.

Breather Fabrics / Meshes Breather fabrics are used to absorb excess resin (bleed) from a laminate which is being cured under vacuum. The fabric also allows the air, or any volatiles, to be evacuated prior to, and during the cure cycle.

Vacuum Bagging Films Vacuum bagging films are used to effectively seal the whole of the area of the composite laminate to be cured.

Self Adhesive Mould Release Materials Self-adhesive mould release materials are used to cover moulds as an effective alternative to the use of release wax or liquids.

Flash / Release / Shrink Tapes Flash tapes are used to locate vacuum consumable materials or to mask off areas to be painted, sanded or to prevent damage. Some of these tapes have release qualities so they can be used as tool repair tapes if necessary. Shrinktapes are used to consolidate specific components.

For further information on product availability contact your local Gurit office.


Contact Website Information on products can be found at our website www.gurit.com. The site contains the most up to date information on all products, available to download in PDF format.

Contacting Gurit

Europe, Middle East and Africa Contacts (EMEA) Contacts

Main Switchboard Telephone Fax / email Role / Specialism

Gurit (UK) +44 (0) 1983 828 000 +44 (0) 1983 828 100

Sales & Customer Support

Generic Email Address: [email protected]

Technical Services

Generic Email Address: [email protected]

Engineering

Klavs Weis Fogh +45 (0) 40 91 69 69 [email protected] Sales Manager

Alex Shimell +44 (0) 7909 940220 [email protected] Industrial Practice

Rod Fogg +44 (0) 7813 713305 [email protected] Marine Practice

Paolo Manganelli +33 (0) 9 5087 8200 [email protected] Marine Raceboat Practice

Luke McEwen +44 (0) 7739 261 601 [email protected] Civil, Vehicles & Renewables Practice

Marketing & Corporate Communications

Tanja Moehler +41 (0) 443 161 555 +41 (0) 443 161 569

mailto:[email protected]

mailto:[email protected]


Gurit EMEA Distributors Country Company & Contact Contact Details

Balearics BM Composites - Ben Parnwell T: +34 971 254 181

W: www.bmcomposites.com

E: [email protected]

Czech Republic

T: +420 220 873 550

Skolil Kompozit - Dimitrij Skolil W: www.skolil.cz


Denmark HF Industri & Marine - Hans Fokdal

T: + 45 62 20 13 12

W: www.hfmarine.dk


Finland Kevra Oy - Jukka Leinonen

T: .+358 9 6126 820

W: www.kevra.fi


France Composites Distribution - Gael Ledressay

T: +33 4 67 4955 00

W: www.composites-distribution.com


Germany

CTM GmbH - Ralf Tapken

T: +49 46 21 955 33

W: www.ctmat.de


Lange & Ritter GmbH – Dirk Lange

T: +49 7156 2006 431

W: www.lange-ritter.de


Hungary Epoxi Hungaria KFT T: +36 23 427420


Italy Resintex Technology S.r.l - Laura Fabi

T: +39 0775 898 099

W: www.resintex.it


Netherlands Bouwmeester Advanced Composites Center - Jaco Bouwmeester

T: +31 20 665 2452

W: www.sp-bac.nl


Norway Hans Claussen AS - Jonas Claussen

T: +47 671 19400


Poland CHEM4POL - Tomasz Kaniewski

T: +48 505 453325

W: www.chem4pol.pl



Gurit EMEA Distributors Continued Country Company & Contact Contact Details

South Africa AMT (Pty) Ltd - John Soper T: +27 21 511 2669

W: www.amtcomposites.co.za

E:[email protected]

Spain Gazechim - Jose Antonio Berja

T: +34 (0) 961241032

W: www.gazechim.es


Switzerland VC Vertriebs AG - Thomas Brunartt

T: +41 44 833 6386

W:


Turkey Neva Marine Yat Malzemeleri Ltd - Nurettin Caliskan

T: +90 216 447 0600

W: www.nevamarine.com


United Arab Emirates

MTM Marine and Industrial - Mike Powell

T: +971 5 290 61897

W: www.masaood.com


United Kingdom

Marineware Ltd

T: +44 (0) 2380 624555

W: www.marineware.com


Mouldlife Ltd - John McHugh T: + 44 (0) 1638 750679

W: www.mouldlife.co.uk


Gurit EMEA Product Catalogue-29-0118

[email protected]

www.gurit.com

Documents

GURIT PRODUCT CATALOGUE EMEA Product Catalogue 2 GPC-28-0817 Introduction to Gurit Gurit is renowned as one of the leading global manufacturers and suppliers of composite materials