Curriculum Vitae

Domínguez, Gustavo DaríoJorge Newbery 1907 2nd floor apt. ACiudad de Buenos Aires- Argentina

Cel: +54911 3778-6931Mail: dominiguezgustavo@gmail.com

Personal InformationBirthday: 12/22/1979Nationality: Argentine / ItalianMarital Status: Single

Professional SummaryControl Engineer with 10 years of experience in industrial power electronics devices, and automation software.Excellent communication skills and interpersonal relationship with peers.Language domain: Spanish, English and German.

Educational BackgroundPMP certified at the PMI -2011Electronic Engineer – Instituto Tecnológico de Buenos Aires (ITBA) - 1999-2007High school degree – Euskal-Echea - 1993-1998

Labor Experience03 / 2007 –Present date Power Generation –Instrumentation and Control (I&C) Present date Siemens S.A• 2016 Control and instrumentation(SPPA-T3000) Project CAREM25 for CNEA.• 2015 Engineering training course of DCS SPPA-T3000 to CNEA.• 2015 Commissioning of the training unit of servers and field units of SPPA-T3000.• 03/2007 - 2015 Development of partial change of Nuclear Central Plant (ATUCHA II) Operational Instrumentation.

- 2011 Support and development of documentation for commissioning sector in CNAII.- 2010 Development of electrical documentation for I&C migration for GENELBA power plant.- 2010 Field experience at nuclear power plant facilities.- 2010 Tecnical asssitance in SPPA-T2000 using TEC4FDE (Field- Device interconnection software tool) - 2009-2010 Development and correction of plant documentation.- 2008 Work experience in Germany working with SPPA-T2000 specially with TEC4FDE software tool.

• 03 / 2007 – 10 / 2007 Ila Group (General Electric Fanuc Representative)Control Engineer.Technical support of control and monitoring systems (iFix SCADA and iHistorian)Main tasks:Updating SCADA software sytems at field, technical support of SCADA software Historic Software.SCADA system programming applied to supervised control and data acquisition.Internal tests and simulations of main technical issues. • 08/2006 – 03/2007 Rockwell AutomationInside SalesMain tasks: Quotation technical support of Motor Control Centers, Motor Drivers, sensors, PLCs and control software.• 12/2005 – 08/2006 Eaton Powerware.Inside SalesMain Tasks; Quotation and technical support of Uninterrupted Power Systems, and other Power electronic devices.

Professional training

- 2011 PMP certified at the PMI- 2010 Preparation curse to certificate for PMP at the Project Management Institute. - 2009-2010 Training in Siemens SITRAIN-San Martín :

Curriculum Vitae

STEP7 Basic for SIMATIC S7-300&400, STEP7 Advanced for SIMATIC S7-300&400, PCS7 Basic – Distributed control system software, Industrial Network PROFIBUS in SIMATIC S7, Industrial Network ETHERNET y PROFINET in SIMATIC S7. - 2009 Training in Project Management : PM Essentials.

- 2009 Seminar and Worshop : FL Switches at Phoenix Contact Buenos Aires. - 2008 Training in control system SPPA-T2000 at Siemens AG Karlsruhe-Alemania: SPPA-T2000 Maintenance for AS 620B, SPPA-T2000 Basic Course for OM690 Engineering, SPPA-T2000 course for Administration (OM690,ES680, AS620).

- 2007 Training and experience in solving issues with Scada iFix

LanguagesSpanish (native)English (Advance – TOEIC First Certificate, Month Trip to England- 1 year work experience in Germany)German (Advence level B2 .2– Goethe Institut).

Projects Experience

• 11/2011 – Present day- Atucha II – Lima-ZaratePartial migration of operational instrumentation of the plant.• 11/2010 –GENELBA – Bs. As.Partial migration of operational instrumentation of the plant.• 11/2007 – Present day- Atucha II – Lima-ZaratePartial change of operational instrumentation of the plant. • 07/2007 - Cementos Avellanda –San Luis.System integration, internal test, Installation and Start-up of SCADA software.• 06/2007 – Roemmers.Field installation and system start-up of SCADA system.• 05/2007 – Sealed Air.Field installation and, SCADA system start-up.

Computer Skills:Excellent skills on:• PLC (Saia and siemens) programming.• Scada Drivers configuration.• iFix, programming control application.• C/C++ programming language• Assembler for Microcontroller HC11,HC08, Z80• Visual Basic Programming.• Matlab, simulink and Mathcad.• Autocad, Solid edge• Office Tools, VBA macros.