H-One E is a high-end bicycle light that is developed for E-Bike and Pedelec with direct current (DC). H-One E will run on any battery from 5,5V to 48V. There is a 6V power output for the rear light. This rear light output works from 12V to 48V input voltage. If you are using an E-bike system with regulated 6V voltage output (like the Bosch system) then the rear light must be connected to the 6V output of the e-bike, not to H-One E. The alloy housing provides both robustness and excellent cooling of the LED. H-One E HERRMANS OY AB P.O. Box 36 FI-68601 Jakobstad Finland Tel. +358 20 134 5100 Fax +358 20 134 5109 [email protected] www.herrmans.eu Power input: E-bike battery from 5,5V to 48V DC Power-input connector: for connecting a additional power-cable (no cable is included) Power consumption: around 3,5W Light output: 75 Lux / 140 Operational lumen Fulfills EMC tests acc. to the e-bike standard EN 15194 Integrated reflector:E-IA, K Switch: ON/OFF • • • • • • • Assembly options: Standard Fork Bracket None SR-Suntour Fork Bracket SR-Suntour NCX Fork Bracket Stainless Steel Bracket for Rigid Fork Stainless Steel Bracket for Suspension Fork Preliminary specs: New multivoltage light for E-bikes. 75

H one e product sheet new

Download PDF Report

Upload
tompetrie
View
217
Download
0

Embed Size (px)

DESCRIPTION

This H-One E from Herrmans offers an incredible 75 lux output and developed specifically for direct current E-Bike and Pedelecs.

Citation preview

H-One E is a high-end bicycle light that is developed for E-Bike and Pedelec with direct current (DC). H-One E will run on any battery from 5,5V to 48V.

There is a 6V power output for the rear light. This rear light output works from 12V to 48V input voltage. If you are using an E-bike system with regulated 6V voltage output (like the Bosch system) then the rear light must be connected to the 6V output of the e-bike, not to H-One E.

The alloy housing provides both robustness and excellent cooling of the LED.

H-One E

HERRMANS OY ABP.O. Box 36FI-68601 JakobstadFinland

Tel. +358 20 134 5100Fax +358 20 134 5109

[email protected]

Power input: E-bike battery from 5,5V to 48V DCPower-input connector: for connecting a additional power-cable (no cable is included)Power consumption: around 3,5WLight output: 75 Lux / 140 Operational lumenFulfills EMC tests acc. to the e-bike standard EN 15194Integrated reflector: E-IA, KSwitch: ON/OFF

••

•••

••

Assembly options:

Standard Fork Bracket

None

SR-SuntourFork Bracket

SR-SuntourNCX Fork Bracket

Stainless SteelBracket for Rigid Fork

Stainless Steel Bracket for

Suspension Fork

Preliminary specs: