EN0H-2618GE23 R0617

Product Specification Sheet •

Water Metering

H4000Woltman Bulk Water Meters DN50 to DN300

EN0H-2618GE23 R0617 • Subject to c

APPLICATION

Honeywell H4000 Woltman bulk water meters are used for

volume measurement of cold water in drinking water

networks. The versatile H4000 is ideally suited for

applications such as production, distribution, conservation

and commercial billing. It features a mechanical roller

counter and can be equipped with clip-on modules for

remote readout applications. Clip-on modules are available

for wired M-Bus and pulse output. The clip-on modules are

retrofittable.

APPROVALS

• MID 2004/22/EC (based on OIMLR-49, EN 14154 and

ISO 4064:2005)

• WRAS

• ACS

SPECIAL FEATURES

• Horizontal and vertical installation position possible

• Low pressure loss

• Retrofittable clip-on modules for remote readout

• Resonant target inductive damping for robust data

output

• Hydrodynamic rotor for enduring accuracy and

durability

• Hard synthetic sapphire and tungsten carbide bearings

• Optionally with pressure monitoring port

TECHNICAL DATA

Media

Medium: Cold drinking water

Connections/Sizes

Nominal size diameter: DN50 - 300

Permanent flow Q3: 15 - 1600 m3/h

Operating temperatures

Temperature class: T50

Medium temperature: 0.1 - 50 °C

Ambient temperature: 5 - 55 °C

Specifications

Water pressure class: MAP16 (max. 16 bar)

Pressure loss class: ∆P16 (16 kPa)

Protection class: IP68

Environmental class: B

Mechanical class: M1

Electromagnetic class: E1

Measuring process: Woltman WP type flow

sensor

Display: Six digit roller counter with

three dials for decimal places

Display range:

DN50 to DN125 DN150 to

DN300

106 m3

107 m3

Increments: 0.005 m3

Acceptable error: +/- 2% at permanent flow Q3

Installation position: H, V

hange 1

H4000 - Woltman Bulk Water Meters

2 Product Specification Sheet • EN0H-2618GE23 R0617 • Subject to change

CONSTRUCTION

METHOD OF OPERATION

Counter

The measuring mechanism contains a six-digit roller

counter for values of whole cubic metres (m³) and dials for

tenth and hundredth parts of m³. The displayed value is the

cumulative (total) flow through the meter. It is flanged to the

flow sensor housing and can be removed for maintenance or

replacement without affecting the approval.

Flow Sensor

The Woltman technology of the flow sensor combines high

measuring accuracy with long term stability and the

capability of measuring high volumes at low pressure drop.

The turbine is connected to the counter by a shaft and a

magnetic coupling.

TRANSPORTATION AND STORAGE

Keep parts in their original packaging and unpack them

shortly before use.

The H4000 is a precision measuring instrument and must

be treated accordingly. The following parameters apply

during transportation and storage:

• Units should only be transported in their original

packaging

• Appropriate lifting gear must be used to lift the H4000

where applicable

• Units should be handled carefully right way up and must

not be dropped

• Units should be stored in a clean, dry environment

*non condensing

INSTALLATION GUIDELINES

Setup requirements

• Calming legs of straight pipe with a minimum length of

3 x DN are required upstream of the meter for sizes up

to DN200 and 5x DN for sizes above DN200

• All sizes may be installed in either horizontal or vertical

position

• The meter must be installed with the counter facing up

or sideways. It must not be installed with the counter

facing downwards

• Avoid installation at highest point of system as air may

be trapped in the meter

• During measurement the meter must be completely

filled with water

Remote Readout

H4000 water meters can be fitted with clip - on modules for

remote readout applications. The clip - on modules are

retrofittable and are attached by means of a standardised

design which is identical for all sizes DN50 - 300. Mounting

of modules does not affect approval to the meter.

The following modules are available:

• Wired M-Bus, according to EN 13757-3

• Pulse output, open collector

Overview Components Materials

1 Approval data -

2 Register Copper can with mineral

glass cover

3 Shroud and lid Plastic

4 Flow arrow and DN size -

5 Meter housing Cast iron with flanges to

EN 1092-2 PN16

6 Top plate Cast iron

7 Meter specifications -

8 Flow arrow on top plate -

Parameter Value

Environment: clean, dry and dust free

Min. ambient temperature: 5 °C

Max. ambient temperature: 55 °C

Min. ambient relative

humidity:

0 %*

Max. ambient relative

humidity:

100 %*

H4000 - Woltman Bulk Water Meters

PR7 Pulse Out Module

The PR7 pulse out module has two pulse outputs, each with

an optional flag over an additional wire:

• Primary pulse output: continuous pulse with optional

direction flag

• Secondary pulse output: compensated pulse with

optional compensation flag

The value for both channels is marked on the module, e.g.

K1:10. The resulting pulse value depends on the meter size:

• For DN50 to 125: multiply the K value by 1

• For DN150 to 300: multiply the K value by 10

Note: Standard remote readout applications, for example pulse counting by a heat meter, typically use the secondary channel without any further flag.

TECHNICAL CHARACTERISTICS

Flow Data

Sizing

• H4000 water meters must be selected in such a way that

typical system flow rates are between transition (Q2)

and permanent flow rate (Q3)

DIMENSIONS

Note: All dimensions in mm unless stated otherwise.

Nominal size

diameter:

DN 50 65 80 100 125 150 200 250 300

Flow rates according to MID

Minimum (Q1): m3/h 0.5 1 1.28 1.28 1.6 2 3.94 6.25 12.8

Transition (Q2): m3/h 0.81 1.6 2.05 2.05 2.5 3.2 6.3 10 20.5

Permanent (Q3): m3/h 63 63 160 160 250 400 630 1000 1600

Overload (Q4): m3/h 79 79 200 200 313 500 788 1250 2000

Dynamic range: Q3/Q1 R125 R63 R125 R125 R125 R125 R125 R125 R125

Additional flow data

Starting flow: m3/h 0.16 0.17 0.22 0.25 0.5 0.9 1.2 1.8 1.8

Pressure loss at Q3: kPa 24 19 18 18 18 15 12 15 37

Overview

C

B

A

D E (

Lid

open

ed)

Parameter Values

Nominal size

diameter:

DN 50 65 80 100 125 150 200 250 300

Dimensions: A 200/

300

200 200/

350

250/

350

250 300 350 450 500

B 78 86 94 106 118 135 165 198 225

D 148 148 159 159 159 206 228 246 246

E 236 236 247 247 247 294 316 334 334

ØC 166 186 201 228 251 286 341 409 461

Flanges: Bolt circle Ø 125 145 160 180 210 210 295 355 410

Bolts 4xM16 4xM16 8xM16 8xM16 8xM16 8xM20 12xM20 12xM24 12xM24

Weight: kg 12.2/

13.1

13 14.1/

16.6

19.4/21 20.5 37.5 47.5 82 104

Product Specification Sheet • EN0H-2618GE23 R0617 • Subject to change 3

H4000 - Woltman Bulk Water Meters

ORDERING INFORMATION

Options

*Over secondary channel of optional PR7 pulse out module - see Accessories below.

Accessories

Description Nominal size

diameter:

Permanent flow

Q3:

Pulse value*: Length: Pressure

port:

Ordering

Number

DN [m3/h] [l/pulse] [mm]

H4000 bulk water

meters with

ISO short (WP)

body

50 63 10 200 • LUPPB4854

65 63 10 200 • LUPPC4855

80 160 10 200 • LUPPD4854

100 160 10 250 • LUPPE4854

125 160 10 250 - LUPPF4800

150 400 100 300 • LUPPG4854

200 630 100 350 • LUPPH4854

250 1000 100 450 • LUPPJ4854

300 1600 100 500 • LUPPK4854

H4000 bulk water

meters with

ISO long body

50 63 10 300 - LUPPB4810

80 160 10 350 - LUPPD4810

100 160 10 350 - LUPPE4810

Description Part No.

LU2925M Clip on modules

PR7M wired M-Bus module LU2925M1269

PR7 pulse output module with 5 metre cable

Primary / secondary pulse output

10/10 LU2925M1222

1/10 LU2925M1224

1/100 LU2925M1263

1/1000 LU2925M1264

10/100 LU2925M1280

25/50 LU2925M1283

1/100 with 10 metre cable LU2925M1288

Environmental & Energy Solutions

Honeywell GmbH

Hardhofweg

74821 MOSBACH

GERMANY

Phone: (49) 6261 810

Fax: (49) 6261 81309

http://ecc.emea.honeywell.com

Manufactured for and on behalf of the

Environmental and Combustion Controls

Division of Honeywell Technologies Sàrl, Z.A.

La Pièce 16, 1180 Rolle, Switzerland

by its Authorised Representative Honeywell GmbH

EN0H-2618GE25 R0617

Subject to change

© 2017 Honeywell GmbH