HALL CONTRACTING SERVICES, INC. - secure · PDF fileHALL CONTRACTING SERVICES, INC. ... 1 to 10 Ton Manual Chain Hoists Including Approx. (20) 6 Ton and ... 60 HP Atlas Copco Model

LARGE MACHINERY MOVER & RIGGING CONTRACTOR INCLUDING GANTRIES, LIFT TRUCKS, HOISTS, RIGGING AND

CONTRACTORS TOOLS AND EQUIPMENT

LARGE MACHINERY MOVER & RIGGING CONTRACTOR INCLUDING GANTRIES, LIFT TRUCKS, HOISTS, RIGGING AND

CONTRACTORS TOOLS AND EQUIPMENTSee Instructions on Page 5

To Become a Qualified Bidder on the Internet

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

Surplus Equipment From

HALL CONTRACTINGSERVICES, INC.HALL CONTRACTINGSERVICES, INC.33530 Pin Oak Parkway – Avon Lake, Ohio 4401225 Miles West of Cleveland, Ohio off I-90

SALE DATE: WED., NOVEMBER 28TH, STARTING AT 9:00 AMSALE DATE: WED., NOVEMBER 28TH, STARTING AT 9:00 AMINSPECTION: TUESDAY, NOVEMBER 27TH, FROM 10:00 AM TO 4:00 PM

1238140E CIA Hall Contracting-6 11/1/12 11:06 AM Page 3

WEDNESDAY, NOVEMBER 28THWEDNESDAY, NOVEMBER 28TH

HYDRAULIC GANTRY SYSTEM400 Ton Lift Systems Model 22AFour-Point Hydraulic GantrySystem; S/N 28034A, and S/N 28032Aon Hydraulic Units, System Consists of(2) Pumps and (4) Lifting Cylinders, 15HP Hydraulic Units, Max Lift Height is27’5” @ 2,000 P.S.I (New 2001)

SEE PHOTO

SELF TRAVELING MODULARGANTRY SYSTEMS ANDCOMPONENTS(2) Sets of 60,000 LB CapacityElectric Powered MotorizedGantry Base Trollies; Each 16’ Long,Requires 480 Power, V-Grooved SteelWheels SEE PHOTO(2) 17’ Long V-Grooved SteelWheel Non-Motorized GantryBase Trollies; 8” X 12” X 1/2” TubularConstruction

(2) 12’ Long V-Grooved SteelWheel Non-Motorized GantryBase Trollies; 12” X 12” X 1/2”Tubular ConstructionApprox. (75) I-Beam Type CrossMembers From 10’ to 30’ Long w/Flanges from 4” to 8” and Websfrom 6” to 18” SEE PHOTOApprox. (75) I-Beam TypeUprights from 10’ to 40’ Long w/Bolting Pads Welded on Each EndApprox. (75) Round TubularUprights from 6’ to 18’ Long, Dia.Range From 6” to 8” SEE PHOTOApprox. (50) Pieces of InvertedAngle Iron Rail Sections to AcceptV-Grooved Trolley Wheels

SEE PHOTOApprox. (35) Pieces of Steel PlateMost 1/2” Thick w/ Max SizeBeing 96” X 180” SEE PHOTO

(2) Sets of 60,000 LB Capacity Electric Powered Motorized GantryBase Trollies

Approx. (50) Pieces of Inverted Angle Iron RailSections to Accept V-Grooved Trolley Wheels

Approx. (35) Pieces of Steel Plate Most ?” Thickw/ Max Size Being 96” X 180”

Approx. (75) I-Beam Type Cross MembersFrom 10’ to 30’ Long w/ Flanges from 4” to 8”and Webs from 6” to 18”

Approx. (75) Round Tubular Uprights from 6’ to18’ Long, Dia. Range From 6” to 8”

400 Ton Lift Systems Model 22A Four-Point Hydraulic Gantry System

(50) Electric Hoists By CM, Bebe, and Others From 1/2 Ton To 10 Ton Capacity

(4) 10 Ton CM Powerstar Electric Chain Hoists w/Motorized Trollies and Pendant Controls

NEW2001


HALL CONTRACTING SERVICES, INC.HALL CONTRACTING SERVICES, INC.

Large Quantity Angle Iron Cross BracingMaterialLarge Quantity of Square Tubing Uprightsand Supports and Many Other Related Items

ELECTRIC CHAIN HOISTS ANDRELATED(12) 10 Ton Beebe Model LE5D100M4Electric Chain Hoists w/ Motorized Trolliesand Pendant Controls(4) 10 Ton CM Powerstar Electric ChainHoists w/ Motorized Trollies and PendantControls SEE PHOTO(4) 7-1/2 Ton CM Electric Chain Hoists w/Pendant Controls w/ Non Motorized Trollies(8) 6 Ton CM Electric Chain Hoists w/ Pendant Controls; (4) Motorized Trollies,(4) Non-Motorized Trollies(25) Other Electric Chain Hoists from 1/4Ton to 6 Ton CapacityApprox. (75) 1 to 10 Ton Manual Chain HoistsIncluding Approx. (20) 6 Ton and (20) 5 TonApprox. (50) Various Capacity Manual I-Beam Hoist Trollies

LIFT TRUCKS AND RELATED15,500 LB Hyster Model S155XL2 LP GasCushion Tire Lift Truck; S/N B024D06893X(2,917 Hours), 3-Stage Mast, 181” Lift Height, SideShift, Truck Weight 21,980 Lbs (New 2000)

SEE PHOTO15,000 LB Caterpillar Model V150 LP GasPneumatic Tire Lift Truck; S/N 10V265, DualFront Tires (8.25-15), Ford 6-Cylinder Engine, 98”Mast Height, Truck Weight 19,600 Lbs8,000 LB Hyster Model H80XM LP GasPneumatic Tire Lift Truck; S/N L005V04929C,Dual Front Tires (29X8-15NHS), 1,780 Hours, 3-Stage Mast, 185” Lift Height, Side Shift (New 2005)

5,000 LB Hyster Model S50XL LP GasCushion Tire Lift Truck; S/N C187V07439P,, w/6,039 Hours, 3-Stage Mast, 189” Lift Height, SideShift 5,000 LB Caterpillar Model T50D LP GasCushion Tire Lift Truck; S/N 8EB11237, 3-StageMast, 189” Lift Height, Side Shift5,000 LB Caterpillar Model T50C LP GasCushion Tire Lift Truck; S/N 38Y03175, 3-StageMast, 156” Lift Height4,500 LB BT Prime Mover Electric PalletTruck

MAN LIFTSGenie Model Z-45/25J DC Self TravelingElectric Boom Type Man Lift; S/N 2-45-013709,Max. Platform Height - 45’, Max Reach - 25’, MaxBasket Load - 500 LBS, Basket - 27” X 68”

SEE PHOTOUpright Model 63700 Self Traveling ElectricScissor Lift; S/N 6255, Max. Height 24’, 48” X 90”Work Platform w/ 36” Extension(2) Strato-Lift Self Traveling Electric ScissorLifts; S/N 5518, S/N 7674, 750 LB Capacity, 20’ LiftHeight, 28” X 90” Work Platform w/ 36” Extension

TRUCKS 2008 Chevy Silverado Z71/4X4 Crew CabPick-Up Truck; VIN 2GCEK13J481338009, VortecV8 Engine, Full Power, Leer Cap Top, Spray-On BedLiner (73,305 Miles)2000 Ford F-150 XLT Extended Cab Pick-UpTruck; VIN 1FTRX17W1YNC06574, AutoTransmission, 4.6 L Gas Engine1994 Ford F350XL Single Axle StraightTruck; VIN 2FDKF37H8RCA79343, AutoTransmission, 5.6L Gas Engine, 12’ Wood Deck FlatBed w/ Side Racks (80,006 Miles)

(3) Self Traveling Electric Scissor Lifts Genie Model Z-45/25J DC Self Traveling ElectricBoom Type Man Lift

(6) Lift Trucks By Hyster and Caterpillar To 15,000 LB Capacity

(2) Pick-Ups and (1) Flat Bed Truck To 2008

15,500 LB Hyster Model S155XL2 LP Gas Cushion Tire Lift Truck

15,000 LB Caterpillar and 8,000 LB Hyster Pneumatic Tire Lift Trucks

NEW2000



BRUNSON OPTICAL ALIGNMENTEQUIPMENT(2) Brunson Model 76-RH Telescopic TransitSquares; S/N 877174, S/N 702529(1) Brunson Model 545 Precision Sight Level;S/N 82834Accessory Equipment Including; (2) Brunson TransitStands, Mounting Devices and Sight Levels, Assorted RepairParts, Training Manuals and Calibration Certification Reports

AIR COMPRESSORS75 HP Kaeser Model CSD-75T Rotary ScrewCabinet Type Air Compressor; S/N 1005, 125 PSIG(New 2004) SEE PHOTO60 HP Atlas Copco Model GA45 Rotary ScrewCabinet Type Air Compressor; S/N A11-364176H, 298CFM w/ ES100 ControlsGimmer Schmidt Model 175 Gas Power PortableAir Compressor; S/N 13120, Powered by Ford ModelWSG-8581-6005-6 Gas Engine, 4-Cylinders forCombustion and 4-Cylinders for Air Pressure, Rated @ 100PSIG and 175 CFM SEE PHOTO(3) 10 HP Ingersoll Rand Model T30 Vertical TankTwo-Stage Air CompressorsKaeser Model TD-76 Air Dryer; S/N 1103 (New 2005)

TOOLROOM EQUIPMENT16”/22” X 60” SKB Geared Head Gap Bed EngineLathe; S/N 168A, 54-1500 RPM, 2-1/2” Spindle Hole, 8”3-Jaw Chuck SEE PHOTO15” X 36” TOR Model D360 Geared Head EngineLathe; S/N 7, 1-1/2” Spindle Hole, 45-1800 RPM, 10” 3-Jaw Chuck, Tailstock1-1/2 HP Nantong Vertical Mill; S/N 40588, 78-5720RPM, 9” X 42” Table, PTF6” X 18” Mighty Freeport Surface Grinder;S/N 20148 SEE PHOTO(2) Wellsaw Model 8 Horizontal Band Saws;S/N 22970, S/N 23100Other Misc. Machine Tools Consisting of; 20” JetSingle Spindle Floor Drill, 18” Enco Vertical Wood CuttingBand Saw, 25 Ton Dayton Hydraulic H-Frame Press, 6”Belt/12” Disc Enco Combination Sander, 10” CraftsmanRadial Arm SawMachine Accessories, Tooling and Inspection andRelated Items Consisting of; 6” Kurt Mill Vises, 10”Yuasa Rotary Table, Minute Man Broach Index, R-8 and 5-CTooling, Hold Down Hardware, Drill Vises, Sumner PortableHone, Assorted H.S. Drills, Tap, Reams, Cabinet Inserts,Assorted Inspection Consisting of; Staret O.D. Movements,

Mitutoyo Measurements, Depth Gages, Parallels, V-Blocks,and Many Other Related Items of All Categories

WELDERS AND RELATED200 Amp Miller Syncrowave 250 TIG Welder;S/N KF968630, Foot Pedal, Radiator300 Amp Arco Model CV-300IT Mig Welder200 Amp Miller Thunderbolt Stick Welder(2) 200 Amp Lincoln AC-225-S Stick Welders(2) 300 Amp Hobart Model R-300-S Mega-ARC300 Stick Welders200 Amp Miller Dialarc 250 Welding Power SourceMiller Spectrum 2050 DC Plasma Cutter w/AutolineHypertherm Powermax900 Plasma CutterWelding Accessories Including Heavy Steel Table,Curtains, Leads, Clamps, Safety Equipment andRelated

MISCELLANEOUS EQUIPMENTCAE Alpheus Model PLT-5X Dry Ice Mini-BlastMachine; S/N 7125C328 (New 2000) SEE PHOTO10,000 LB Salter Brecknell Floor Type PlatformScale w/ Model 200E Digital Readout40 HP Spencer Turbine Model 36103A4Fan/Blower; S/N 266344, 1,720 CFM(2) 20” X 40” X 20” Deep Parts Washing Tanks w/Electric SprayersMagnus Mini-Lif Parts Washing Tank1-1/2 HP Baldor Double End Long Arm Buffer(6) Other Double End Grinders

NEWSPAPER PRINTING PRESS PARTSEnkel Model RD40-3 (Deck) Ribbon Deck; S/N 11-00036 (New 1996) SEE PHOTO(20) Goss-Colorliner Press Stand Motor ControlUnits w/ Allen Bradley Controls SEE PHOTO(1) Goss-Colorliner Master Control Panel w/ AllenBradley ControlsNela Model Classic II-990 Semi-Automatic PowerPlate Bender for Offset Plates; S/N CL2-14517-01Nela Model BG713861 Electronic Plate Punch; S/NN/A22-3/4” Metro Offset Plate Cylinder Cut-OffsLarge Prim Radial Arm Assemblies SEE PHOTOMany Other Press Components

(20) Goss-Colorliner Press Stand Motor Control Units w/ AllenBradley Controls

Brunson Optical Alignment System 75 HP Kaeser Model CSD-75T Rotary ScrewCabinet Type Air Compressor

6” X 18” Mighty FreeportSurface Grinder

CAE Alpheus Model PLT-5X Dry Ice Mini-BlastMachine

Large Prim Radial Arm Assemblies

Gimmer Schmidt Model 175 Gas Power Portable AirCompressor

16”/22” X 60” SKB Geared Head Gap Bed Engine Lathe

Partial View Welders and Plasma Cutters

NEW2000

NEW2004

NEWSPAPER PRINTING PRESS COMPONENTS

Enkel Model RD40-3 (Deck) RibbonDeck



RIGGING TOOLS AND EQUIPMENT(10) 20,000 LB Cap. (Estimated) 36” X72” X 8” High Steel Flat Top Dollies(20) Various Capacity Skate Sets andDollies Including (10) Individual Unitsand (10) 4-Wheel Units(50) Hydraulic, Toe, Screw and OtherStyle Jacks Approx. (125) Cable Chokers from 3/4”X 4’ to 1/2” X 12’Approx. (125) Shackles from 3/4” to 1-1/4” Approx. (75) Hoist Rings from 3/4” to1-1/4” Including Some MetricApprox. (75) C-Clamps from 6” to 12”

Approx. (25) Snatch Blocks from 6” to10”Approx. (25) Various Size Chain andCable Come-A-LongsApprox. (25) 5 Ton and 10 Ton TrackJacks and HandlesNylon Slings, Straps and Rope ofVarious SizesLarge Quantity Various Lifting and LogChainsOther Rigging Related Tools andEquipment Consisting of; (5) 12’ CastIron Straight Edges, Beam Clamps, (20)Breaker Bars and (20) Johnson Bars, Scotties,Chains, Binders and Other Related Items

CONTRACTORS, POWER ANDHAND TOOLS AND EQUIPMENT(30) Knaack and Other Portable JobBoxes of Various Sizes and Styles(15) Milwaukee Magnetic Base Drills(75) Electric and Cordless Drills byMilwaukee, Dewalt and Others(50) Various Saws Including Porta-Band Saws, Sawzalls, Skil Saws andRelatedLarge Quantity Sockets, Box End andCombo Wrenches and Related100’s of Lots Contractors, Power andHand Tools and Equipment Consistingof; (30) Angle Grinders, Impact Wrenches,Torque Wrenches, Pipe Bender, Tap and Die

Sets, Pipe Wrenches, Pipe Cutters, GearPullers, Sledge Hammers, Levels, Squares,(50) Various Fiberglass Ladders, VariousTubular Frame Scaffolding Including UprightFramework and Walk Boards, EnerpacHydraulic Jacks w/ Pumps, Jack Stands, FloorJacks, Extension Cords and Many OtherRelated Items

SHOP AND SUPPORT EQUIPMENTShop and Support EquipmentConsisting Of; Roto-Bin and Pigeon HoleRacks w/ Hardware, Pedestal Fans, AcetyleneOutfits, Hydraulic Pallet Trucks, Banding Sets,Portable Shop Ladders, Benches, Tables, SteelShelving, Fireproof Safety Cabinets, 2-DoorCabinets and Many Other Related Items

IMPORTANT AUCTION NOTICEA Large Quantity of this Equipmentis currently stored in Gang Boxesand Storage Crates. We are stillopening these and discovering

equipment. Please See the Auction Catalog on our website

www.cia-auction.com2-Weeks Prior to the Auction

for a Complete List of theItems to be Sold.

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale

Date, if you do not you will not be approved.➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000.00

Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post theDeposit Will Not be Approved. Period.

➢ Only Major Items Will be Available for Online Bidding. Please referto the Listing on www.bidspotter.com for Available Online Items.

➢ There is a 18% Buyer’s Premium in Effect for All Online Purchases.

➢ We Highly Recommend that Potential Buyers Attend this Auction & BidLive Onsite. This will give you the Ability to Inspect the Items & Fully Appreciate Their Condition, Along with Saving You 3% of the Buyer’s Premium.

No Last Minute Registrations will be accepted. Make Sure to Register & Post Your Deposit No Laterthan 48-Hours Prior to the Start of the Auction.


All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM 18% ONLINE BUYER’S PREMIUM

TERMS OF SALE

AUCTIONEERS

From I-90 Approx. 25 miles west of Cleveland exit S.R.611 (Exit #151). Proceed north 1/4 mile to Chester Road,go right (East) on Chester Road approx. 1/2 mile toMoore Road. Go left (North) on Moore approx. 1 mile toPin Oak Parkway. Go right (East) on Pin Oak Parkwayand proceed approx. 1/2 mile to sale site on left. Watchfor auction signs and arrows.

DIRECTIONS


SALE DATE:Wednesday, November 28th

STARTING AT 9:00AMINSPECTION:

Tuesday, November 27th10:00 AM to 4:00 PM

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

LARGE MACHINERY MOVER & RIGGING CONTRACTORINCLUDING GANTRIES, LIFT TRUCKS, HOISTS,

RIGGING AND CONTRACTORS TOOLS AND EQUIPMENT

Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.

PHOTOGRAPHY BY DAVID N. HERBERGER

IMPORTANT NOTICE:

33530 Pin Oak ParkwayAvon Lake, Ohio 44012

25 Miles West of Cleveland, Ohio off I-90

(50) Electric Hoists To 10 Ton(50) Electric Hoists To 10 Ton(50) Electric Hoists To 10 Ton

Lift Systems GantryLift Systems GantryLift Systems Gantry

100’s Lots Contractors Tools100’s Lots Contractors Tools100’s Lots Contractors Tools

(6) Lift Trucks To 15,000 Lb(6) Lift Trucks To 15,000 Lb(6) Lift Trucks To 15,000 Lb

33530 Pin Oak ParkwayAvon Lake, Ohio 44012

25 Miles West of Cleveland, Ohio off I-90


Cincinnati Industrial Auctioneers, Inc. – License No. 63-1983-10439Jeffrey L. Luggen – License No. 57-1983-33789Jerome A. Luggen – License No. 52-1983-33799Jeffrey M. Luggen – License No. 2010-0000-26Joseph M. Luggen – License No. 2010-0000-19

John F. Rome – License No. 57-2000-84249

Cincinnati IndustrialAuctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PHONE (513) 241-9701 / FAX (513) 241-6760WEBSITE: cia-auction.com


Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760


Documents

HALL CONTRACTING SERVICES, INC. - secure · PDF fileHALL CONTRACTING SERVICES, INC. ... 1 to 10 Ton Manual Chain Hoists Including Approx. (20) 6 Ton and ... 60 HP Atlas Copco Model