BK404 is the choice for applications where cut resistance, slip resistance, and dex-terity are all required. Made of high-density polyethylene (HDPE) fibers, this Brass Knuckle® glove offers heavy-duty ANSI cut level 4 protection. For slip resistance, the polyurethane palm and finger coating help ensure high tactility in dry and light oil applications. Polyurethane is also effective protection against fats and greases. When compared to latex and nitrile coatings, polyurethane offers the high-est level of dexterity and improved ergonomics. The glove’s base fabric — an ultra-high-molecular-weight polyethylene fiber — also permits maximum manual dexterity and provides high cut resistance without bulk.

Hand and arm protection should fit comfortably. Gloves should

not be so tight that they limit hand movement or so loose that

they present a hazard of being snagged, caught, or grabbed by moving equipment. Inspect your

hand protection before each use.

Brass Knuckle®

BKCR404 CUT AND SLIP PROTECTION MEET THE DEXTERITY LEADER

Hand Protection

BKCR404HDPE CR Level 4 Shell,

Polyurethane Coating

US Headquarters: 3287 Southwest Blvd • Grove City, OH 43123 • P 800.837.5900 • www.Safetytoday.comCanadian Operations: 195 Savannah Oaks Dr, Ste 6 & 7 • Brantford, Ontario N3V 1E8 • P 800.263.1251 • www.Safetytoday.ca

CUT RESISTANCELEVEL 4

GENERAL PURPOSE

EASY GRIP

4

Ideal Markets Construction | Electrical Assembly | General Assembly | Glass Handling | HVAC | Manufacturing | Vehicular Construction | Receiving Areas | Sheet Metal

be safe. be smart.

Excellent dexterity!

Hand Protection

Brass Knuckle®, SmartCut™ BKCR404Excellent for handling metals, the polyurethane coating provides slip resistance even when exposed to light oils and is *proven not to mar product surfaces. Brass Knuckle BKCR404 gloves are available in five sizes and have color coded wrists to simplify sizing and re-issuing. *PPG-approved for glass-handling applications.

Size Cuff Color Shell/Coat Pack Sz Part # 6 Red Salt & Pepper/Gray 12 pair BKCR404-6 7 Blue Salt & Pepper/Gray 12 pair BKCR404-7 8 Green Salt & Pepper/Gray 12 pair BKCR404-8 9 White Salt & Pepper/Gray 12 pair BKCR404-910 Black Salt & Pepper/Gray 12 pair BKCR404-10

US Headquarters 3287 Southwest Blvd Grove City, OH 43123

P 800.837.5900www.Safetytoday.com

Canadian Operations 195 Savannah Oaks Dr, Ste 6 & 7

Brantford, Ontario N3V 1E8P 800.263.1251

www.Safetytoday.ca

1

2

3

4

5

1. Polyurethane coating on full fingers and palm. Ideal choice for dry and light-oil applications. Delivers excellent grip, even against oils, fats, and greases. Soft and flexible polyurethane coatings improve tactile sensitivity.

2. Smooth grip enhances abrasion resistance.

3. HDPE knit is a high-performance fiber, providing ANSI cut level 4 protection without bulk. Strength-to-weight ratio is in a range that’s 8 to 15 times higher than steel. Uncoated back and wrist helps improve ventilation.

4. Color codes simplify re-issuing and spot checking for compliance. Brass Knuckle® cut level 4 gloves feature an orange Brass Knuckle logo. Color-coded cuffs indicate glove size.

5. A full knit wrist — seamless and stretchable — provides a snug fit and prevents dirt, debris, and cold from getting inside glove.

WARNING: Cut-resistant gloves are extremely cut resistant but not cut proof. Do not subject to high speed or highly serrated blades. Always disconnect power before cleaning or removing sharp blades.

be safe. be smart.

BKCR404HDPE CR Level 4 Shell,

Polyurethane CoatingCUT RESISTANCELEVEL 4

GENERAL PURPOSE

EASY GRIP

4