Embed Size (px)
Citation preview
HAND TOOLS
CRIMPINGTOOLS
3
CRIMPER 6 - 562113
Cable Cross-Section 0,25-6,0mm² (AWG 24-10)
Crimping Technique Linear
Terminal Insertion Front
Self-Adjustment Automatique
• Automatic adjustment to the wire cross-sections
• Continuous precision crimp over the full length of the ferrule
• Full cycle ratchet operation (with release) assuring a complete crimp
• Perfect fit to hand ergonomics
• Patented crimping technology
Terminal / Connector Type
Crimping Profile
CRIMPINGTOOLS
4
CRIMPER F 10 R - 562125
Cable Cross-Section 0,08-10 mm² (28-8 AWG)
Crimping Technique Linear
Terminal Insertion Side
Self-Adjustment Automatique
• Crimping of wire end ferrules with or without insulation
• High-precision crimping results
• Ergonamically designed soft handles with non-slip-off grip material comfortable
working.
Terminal / Connector Type
Crimping Profile
CRIMPINGTOOLS
5
CRIMPER F 10 L - 562126
Cable Cross-Section 0,5-10 mm² (20-8 AWG)
Crimping Technique Linear
Terminal Insertion Front
• Automatic adjustment to the wire cross-sections
• High precision crimping
• Releasable ratchet ensures the complete crimping process
• Ergonamically designed soft handles with non-slip-off grip material comfortable
working.
Terminal / Connector Type
Crimping Profile
CRIMPINGTOOLS
6
CRIMPER N 16 H - 562124
Cable Cross-Section 0,08-16 mm²
Crimping Technique Linear
Terminal Insertion Side
• Automatic adjustment between 0,08 - 16 mm²
• Required hand force reduced by 30%
• Hexagonal crimping
• Releasable ratchet ensures the complete crimping process
• Ergonamically designed soft handles with non-slip-off grip material comfortable
working.
Terminal / Connector Type
Crimping Profile
CRIMPINGTOOLS
7
CRIMPER N 16 L - 562117
Cable Cross-Section 0,14-16,0 mm²
(26-20;18-16; 14; 12; 10; 8; 6 AWG)
• Releasable ratchet ensures the complete crimp process
• Special-designed ergonomic handles prevents slipping
• Ergonamically designed soft handles with non-slip-off grip material comfortable
working.
Terminal / Connector Type
Crimping Profile
CRIMPINGTOOLS
8
CRIMPER N 50 L - 562119
Cable Cross-Section 10,0-50,0 mm² (8;6;4;2;1 AWG)
• Releasable ratchet ensures the complete crimping process
• Ergonamically designed soft handles with non-slip-off grip material comfortable
working.
Terminal / Connector Type
Crimping Profile
CRIMPINGTOOLS
9
CRIMPER IT 6 S - 562120
Crimping Range Red 0,5-1,0 ( 20-18 AWG)
Blue 1,5-2,5 (16-14 AWG)
Yellow 4,0-6,0(12-10 AWG)
• Red/blue/yellow round type DIN cable lugs, pin cable lugs, female FASTON
cable lugs, male FASTON cable lugs, male terminals, cable joints
• Ergonamically designed soft handles with non-slip-off grip material comfortable
working.
Terminal / Connector Type
Crimping Profile
10
CABLESTRIPPERS
STRIPPER 16 - 562114
Cable Cross-Section 0,03-16 mm²
Terminal Insertion Front
• Striping and cutting of stranded and solid wire with PVC insulation of 0,03 to 16 mm2
• Self-adjustment for all cross-sections with POWER PLUS feature
• Adjustable stripping length 3 - 21 mm
• Ergonamically designed soft handles with non-slip-off grip material comfortable
working.
11
CABLESTRIPPERS
STRIPPER 28 C - 562123
Cable Diameter Ø4,5 – 29 mm
• Cable stripping as lane with patented stripping mode
• Maximum performance with less effort
• High strength special steel
CABLECUTTING TOOLS
12
CUTTER 32 - 562122
Cable Cross-Section Solid:max. 25/15 mm AL/CU diameter
Stranded:max. 32 mm diameter or 300 mm²
• High tempered special steel
• Locking lever
• Step-wise and burr-free cutting
• Unlocking possibility in every position
• Hand tool model
• Ergonamically designed soft handles with non-slip-off grip material comfortable
working.
13
WIRING DUCTCUTTING TOOLS
RAILCUTTING TOOL
13
KKMR553230
KMK 1002553220
KRKM500650
• Burr-free cutting of
wiring ducts and wiring
duct covers
• Straight or 45º cutting
options
• Equal force distribution
across blades helps
homogenous cutting
• Cutting up to 100 mm
width
• 3 different cutting slots
• Clean Cut
• Lossless cutting
• Non-blunting knife
• Length adjustment
guide
• Cover cutting
• Burr-free cutting
• Non-blunting knife
• Length adjustment
guide
• Cutting up to 125 mm
width
Cutting Type Straight
Max. Width 125 mm
LengthAdjustment
100 cm
CuttingThickness
1.5 mm
CuttingCapacity
7.5x35 mm15x35 mm Tij Ø8mm
LengthAdjustment 100 cm
SCREWDRIVERS
14
NON-ISOLATEDSCREWDRIVERS
Order. No. Type Description
561 010 IKT 1 2,5x75. -Flat
561 020 IKT 2 3,0x100. -Flat
561 030 IKT 3 3,5x100. -Flat
561 040 IKT 4 4,0x125. -Flat
561 050 IKT 5 5,5x150. -Flat
561 060 IKT 6 6,5x200. -Flat
Order. No. Type Description
561 110 KK 1 140 mm.
561 120 KK 2 180 mm.
Order. No. Type Description
560 010 KT1 2,5x75. -Flat
560 020 KT2 3,0x100. -Flat
560 030 KT3 3,5x100. -Flat
560 040 KT4 4,0x125. -Flat
560 050 KT5 5,5x150. -Flat
560 060 KT6 6,5x200. -Flat
ISOLATEDSCREWDRIVERS
MAINS TESTER
14
NON-ISOLATEDSCREWDRIVERS
HAND TOOLS (2016)
293466516057639020000001
6.6.4.2.2.00248www.klemsan.com.tr Re
visio
n N
o: 1
5032
016
FactoryKemalpaşa Yolu 3. km 35170İZMİR / TURKEYTel : (+90 232) 877 08 00Fax : (+90 232) 877 08 06
OVERSEAS OFFICES
Sales Head OfficePerpa A Blok K:2 No: 9/0041 Okmeydanı – İstanbul / TURKEYTel :+90 (212) 222 52 00Fax :+90 (212) 222 66 55
Russian Federation141400, Khimki, Zavodskaya 2- MoscowTel : +7 495 644 02 21
ChinaRm.1707,no.218,Hengfeng road,Morden Traffic Business Building, Zhabei District,Shanghai. 200070Tel :+86 21 62260338Fax :+86 21 62263983
USA525 N. Tryon St.Suite 1600 Charlotte, NC 28202Tel : +1 980 226 06 88
U.A.EZ Building Z 57 Saif ZoneSharjahTel :+971 6-557 37 10Gsm :+971 56-760 28 37
Ukraine6-8A, Yaroslava Ivashkevicha Str.Office 7-8 04074, KievTel :+380 637 217 185
ColombiaGsm :+57 304 427 73 59
MexicoGsm :+52 (55) 4511 8809
İranNo.592-594 - Corner of Aghabalazadeh St. South Kargar Ave. Tehran/IRANTel :(+9821) 55425407-9Fax :(+9821) 55425407-9
