Embed Size (px)
Citation preview
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 1 Prepared by Micro-Pak Ltd.
!
!
It is Burlington Coat Factory policy that all handbags and backpacks be packed with the specified mold preventative materials to combat the growth of mold, mildew and fungus. Use of silica gel packets or counterfeit Micro-Pak PE Sheets is not acceptable within product packaging for our brands and non-compliance with this policy will result in penalties and chargebacks. To help ensure that footwear and other products are delivered to our customers without mold, mildew or fungus, Micro-Pak® Enhanced Packaging must be used according to this guideline and the “Instructions for Use” provided in section 3.
Information for Micro-Pak® Enhanced Packaging Products are available from:
ASIA CONTACT (Head Office) Micro-Pak Ltd.
EUROPE CONTACT Micro-Pak Europe BV
USA CONTACT Micro-Pak USA, Inc.
Suite 2504, Tower 6, The Gateway, Harbour City, 9 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (852) 2956 2991 Fax: (852) 2956 0790 E-mail: [email protected] Website: www.micropakltd.com
Meander 701, 6825ME Arnhem, Netherlands Tel: (31) 26-361 9718 Fax: (31) 26-362 1728 E-mail: [email protected] Website: www.micropakltd.com
7421 SW Bridgeport Road, Suite 204, Tigard, OR 97224, USA Tel: (1) 503-747 5755 Fax: (1) 503-747 5783 Email: [email protected] Website: www.micropakltd.com
Mold Prevention Measure for Merchandise
!
Micro-Pak® Enhanced PE Sheet Actual Size: 25cm X 25cm Product Code: PD003 EPA Reg No. 88401-2
!
Micro-Pak® Enhanced PE Sheet Actual Size: 40cm X 30cm Product Code: PD047 EPA Reg. No. 88401-2
!
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 2 Prepared by Micro-Pak Ltd.
!
!
1. Micro-Pak® Enhanced Packaging Products
Terms The price listed is for orders placed directly with Micro-Pak, Ltd and are ex-Warehouse Hong Kong. Payment is required pre-pay in advance. Pricing and terms will vary on orders placed through Micro-Pak authorized distributors. Stock Availability Micro-Pak – Hong Kong has product in stock at all times. Please place your order(s) ideally two weeks in advance to ensure sufficient time for order processing and delivery. Delivery Micro-Pak can also offer prices including delivery in China and you may contact Micro-Pak Ltd. directly for further information.
Micro-Pak® Item Product Code Order Unit (pieces) Quantity Unit Price (USD)
ex-warehouse Hong Kong
25cm x 25cm PE Sheet PD003 1,000 pieces (1 roll) 1-40 units USD $30.00
41 and above USD $27.50
40cm x 30cm PE Sheet PD047 1,000 pieces (2 rolls) 1 and above USD $60.00
60cm x 40cm PE Sheet PD046 1,000 pieces (10 rolls) 1 and above USD $120.00
!
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 3 Prepared by Micro-Pak Ltd.
!
!
2. Counterfeits
Micro-Pak® PE Sheets should be purchased directly from Micro-Pak or their authorized distributors ONLY. Additional information on Micro-Pak® is available at www.micropakltd.com. Direct all questions regarding Micro-Pak® products via email to [email protected].
Additional information on counterfeit protection as well as a list of the authorized distributors of Micro-Pak® products is available at www.micropakltd.com
Use of counterfeit Micro-Pak® products will result in penalties and chargebacks.
REMINDER:
• Do not use silica gel packets, or any other brands of anti-mold products.
• Do not acquire anti-mold copies such as Microgarde, or other counterfeit copies found on websites such as Alibaba.com. Such products infringe on valid patents, and are not supported by Burlington Coat Factory.
• An important message is also appearing on the Micro-Pak website regarding an unauthorized company selling counterfeit stickers or sheets (see below).
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 4 Prepared by Micro-Pak Ltd.
!
!
3. Instructions for use
I. Micro-Pak® PE Sheets The sheets are designed for items packed in polybags and items that have components made from genuine lambs wool. The reasoning is that for polybag packed items often times the packing is tight and there is restricted air-flow which would prevent our stickers form being fully effective. By using the sheet the release area will be much larger.
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 5 Prepared by Micro-Pak Ltd.
!
!
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 6 Prepared by Micro-Pak Ltd.
!
!
!
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 7 Prepared by Micro-Pak Ltd.
!
!
!
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 8 Prepared by Micro-Pak Ltd.
!
!
!
HANDBAG AND BACKPACK PACKAGING GUIDELINES
!
Micro-Pak® Packing Recommendations Page 9 Prepared by Micro-Pak Ltd.
!
!
Usage
• The Micro-Pak® dispenser box should be used when using Micro-Pak® PE Sheets. They are supplied one box per production line and are free of charge.
o Note: The dispenser boxes are not for storage of PE Sheets. Micro-Pak® PE Sheets should be opened and placed in the dispenser ONLY when they are ready to be used.
• Micro-Pak® PE Sheets should always be placed in the dispenser box, not left out on working tables exposed to air.
• In case you are missing dispenser boxes: You can make a small opening in the corner of the foil pouch. Then you can pull out stickers or sheets as needed.
o When finished, be sure to completely close foil pouch, as to not expose the product to air.
Common Mistakes & Special Points about Micro-Pak® products
• Do not pre-prepare boxes with PE Sheets.
• Do not open the pouches and count the stickers or sheets before use.
• Do not leave rolls of PE Sheets exposed to air on the production line.
• Put unfinished rolls of PE Sheets back in the foil pouch at the end of the day and seal with tape.
o These sheets should be used as soon as possible.
4. Tips for usage and storage of Micro-Pak products
