2
- Long cycle life (greater than 5,000) - Up to 99% efficiency, allowing faster charging with minimal loss - Lower self-discharge rate - Reduces service calls and maintenance - 10 year shelf life - Up to 40% more up time vs. an equivalent sized sealed lead acid battery - Single battery saves space, cost, weight and labor Altronix | 718.567.8181 | altronix.com Dual SFP Ports Battery Shelf Single LiFePO4 battery (Altronix model # BTL125) 115/230VAC Input Lightweight NEMA 4/4X, IP66-11 Rated enclosure for outdoor use (PMK2 - Altronix pole mount kit) Network Management Technology – remotely monitor, control & report power/diagnostics over the network Ethernet (PoE) Ports Battery Terminals Support Lithium Iron Phosphate only ® SPECTRUM FIBER SOLUTIONS More than just power.™ Altronix Hardened PoE+ Switches are now available with Optimized Lithium Iron Phosphate Battery Charger, providing up to (2) 1Gb SFP (Fiber) ports, along with up to (8) PoE/PoE+ ports ports passing data for PoE/PoE+ compliant devices. Outputs are also configurable for a single Hi-PoE (60W) port. These units are designed to support a single 12V LiFePO4 (Lithium Iron Phosphate) battery for high storage and charge/discharge cycle life reliability. - Single or two (2) Gigabit SFP (Fiber) ports (compatible with Altronix SFP modules: P1MM (multi-mode), P1SM10 (single mode) or P1AB2K (single strand) - Up to Eight (8) 10/100/1000 Mbps Ethernet ports accommodating PoE, PoE+ or Hi-PoE devices - 75W total power. - Supports 12V LiFePO4 (lithium iron phosphate) only, not for use with sealed lead-acid. - Automatic switch over to stand-by battery when AC fails. - Built-in power management allows for remote camera reset, control and monitoring of power, anywhere over the network. - Email and Windows Dashboard Alert notifications report real-time diagnostics. - UL Listed in the U.S. and Canada (pending). - CE Approved. - Backed by a Lifetime Warranty & proudly Made in the U.S.A. Features Hardened PoE+ Switches with Optimized Lithium Iron Phosphate Battery Charger Benefits of using Lithium Iron Phosphate Batteries in NetWay Spectrum Series:

Hardened PoE+ Switches with Optimized Lithium Iron .../media/... · (2) 1Gb SFP (Fiber) ports, along with up to (8) PoE/PoE+ ports ports passing data for PoE/PoE+ compliant devices

  • Upload
    others

  • View
    17

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Hardened PoE+ Switches with Optimized Lithium Iron .../media/... · (2) 1Gb SFP (Fiber) ports, along with up to (8) PoE/PoE+ ports ports passing data for PoE/PoE+ compliant devices

- Long cycle life (greater than 5,000)

- Up to 99% efficiency, allowing faster charging with minimal loss

- Lower self-discharge rate

- Reduces service calls and maintenance

- 10 year shelf life

- Up to 40% more up time vs. an equivalent sized sealed lead acid battery

- Single battery saves space, cost, weight and labor

Altronix | 718.567.8181 | altronix.com

Dual SFP Ports

Battery Shelf

Single LiFePO4 battery(Altronix model # BTL125)

115/230VAC Input

Lightweight NEMA 4/4X, IP66-11 Rated enclosure for outdoor use(PMK2 - Altronix pole mount kit)

Network Management Technology– remotely monitor, control & report power/diagnostics over the network

Ethernet (PoE) Ports

Battery Terminals Support Lithium Iron Phosphate only

®

SPECTRUM

FIBER SOLUTIONSMore than just power.™

Altronix Hardened PoE+ Switches are now available with Optimized Lithium Iron Phosphate Battery Charger, providing up to (2) 1Gb SFP (Fiber) ports, along with up to (8) PoE/PoE+ ports ports passing data for PoE/PoE+ compliant devices. Outputs are also configurable for a single Hi-PoE (60W) port. These units are designed to support a single 12V LiFePO4 (Lithium Iron Phosphate) battery for high storage and charge/discharge cycle life reliability.

- Single or two (2) Gigabit SFP (Fiber) ports (compatible with Altronix SFP modules: P1MM (multi-mode), P1SM10 (single mode) or P1AB2K (single strand)

- Up to Eight (8) 10/100/1000 Mbps Ethernet ports accommodating PoE, PoE+ or Hi-PoE devices

- 75W total power.

- Supports 12V LiFePO4 (lithium iron phosphate) only, not for use with sealed lead-acid.

- Automatic switch over to stand-by battery when AC fails.

- Built-in power management allows for remote camera reset, control and monitoring of power, anywhere over the network.

- Email and Windows Dashboard Alert notifications report real-time diagnostics.

- UL Listed in the U.S. and Canada (pending).

- CE Approved.

- Backed by a Lifetime Warranty & proudly Made in the U.S.A.

Features

Hardened PoE+ Switcheswith Optimized Lithium Iron Phosphate Battery Charger

Benefits of using Lithium Iron Phosphate Batteries in NetWay Spectrum Series:

Page 2: Hardened PoE+ Switches with Optimized Lithium Iron .../media/... · (2) 1Gb SFP (Fiber) ports, along with up to (8) PoE/PoE+ ports ports passing data for PoE/PoE+ compliant devices

Made in the U.S.A. | Lifetime Warranty

3-Port Hardened PoE Switches with Single SFP Port

Model Configuration SFP port(s)(Gb)

PoE ports(PoE / PoE+ / Hi-PoE)

Input:115/230VAC

NetWaySP3LWPX

PoE+ Switch& Power Supply/Charger

in Outdoor EnclosureNEMA 4/4X, IP66

13-Ports rated up to 30W or 1-Port rated up to 60W

(75W total power)

3

NetWay4ELWPX 14-Ports rated up to 30W or 1-Port rated up to 60W

(75W total power)

NetWaySP4LWPX 24-Ports rated up to 30W or 1-Port rated up to 60W

(75W total power)

NetWaySP8LWPX 28-Ports rated up to 30W or 1-Port rated up to 60W

(75W total power)

BTL125 LiFePO4 - 4.5aH Lithium Iron Phosphate Battery

®

SPECTRUM

Hardened PoE+ Switches with Power Supply/Chargers for Lithium Iron Phosphate Batteries