Hardware, Track, Sill System & Weathersealing for … · Eclipse E3 is specified with 5 separate groups: track, sill, weathersealing, flushbolts and hardware. Components are required

E3™ SYSTEMHardware, Track, Sill System & Weathersealing for Exterior Folding Doors & Windows

Exterior Folding Door Systems

E3™ Specification & Fabrication Catalogue • Revision (17) March 15, 2018

PRINTED CATALOGUE MAY NOT BE UP TO DATE, ALWAYS REFER TO PRODUCT WEBSITE FOR MOST UP TO DATE CONTENT.

© Copyright 2018 • Eclipse Architectural®2 ALL DRAWINGS NO SCALE

E3 HARDWARE, TRACK, SILL SYSTEM & WEATHERSEALING FOR EXTERIOR FOLDING DOORS & WINDOWS

maximum panel weight: 250lbs (115kg) each panelmaximum panel width: 47-1/4” (1200mm)maximum panel height: 141-47/64” (3600mm)maximum number of panels: 8 each way

In a single direction

Parts Selection

Top Track With flushbolt pin channel

Weatherseals & Astragal

Sill System Floor Channel

Flushbolts or Twinpoint

• panel thickness: 1-3/4” (44.5mm) or 2-1/4” (57mm) when using E3™ sill system• panel thickness: 1-3/8” (34.9mm) to 3” (76.2mm) when using floor channelNOTE: When using maximum panel width & height 47-1/4” (1200mm) x 141-47/64” (3600mm) panel may exceed maximum panel weight of 250 lbs (115 kg). Calculated weight check should be done.

Eclipse E3 is specified with 5 separate groups: track, sill, weathersealing, flushbolts and hardware. Components are required from all 5 groups to build an Eclipse folding door system.

KTE3DJEclipse E3 Drilling JigSee E3 Drilling Jig instruction sheet on www.eclipsearchitectural.com (under Products > E3 folding door systems)

DS434 Weatherseal for sill, jamb and header. Black, brown or white

KT190 Fir astragal, may be stained or painted

DSP108-35BL Pile weatherseal for door with astragal, 5/16” (8mm) pile height, black

DS7145-270BL Pile weatherseal for KT70 & KT75 top track, black

DS434 Kerf seal

DS416 Weatherseal for between doors. Black, brown or white

DS369A7145BL Aluminum T-slot extrusion with black pile insert, for bottom of doors

DS415BL black DS415W white DS415B brown weatherseal for between doors, use on clad doors where kerf slot is not possible

KT75C clear anodizedKT75D bronze anodizedLengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)

Top Track, extruded aluminum (OPTIONAL)

KT70D bronze anodized. Lengths available: 111”, 147”, 183”, 222”, 294” (2819mm, 3754mm, 4648mm, 5639mm, 7468mm)

2-7/16” (62mm)

2” (50.2mm)

4 lengths available:

DBOT & DBSY Style 1” (25.4mm) throw length regardless of bolt length. Finishes available: brushed aluminum or bronze powder coat.

KT23DV floor channel, bronze anodized with PVC insert, black.Lengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)

KT23BLVE Replacement PVC insert (only)

KT795 8” wide (203mm) for 1-3/4” (44.5mm) door.KT797 8” wide (203mm) for 2-1/4” (57mm) door. KT775 6-9/16” wide (167mm) for 1-3/4” (44.5mm) door. KT777 6-9/16” wide (167mm) for 2-1/4” (57mm) door.

KT749 Flushbolt cup, satin or bronze

KT750GASKET included with KT749, fits under rim of cup

Hardware

2 stock finishes available: Stainless steel & pvd bronze

1-31/32” (50mm)

3-37/64” (90.9mm)

NEWPRODUCT

NEWPRODUCT

7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

1" (25.4mm)

NEWPRODUCT

KT768GASKET sill to jamb assembly gasket

Fir top water return sill, extruded aluminum clear or bronze anodized.

KT795COVERBLVEPVC insert, black. Snap in cover for flushbolt channels for the new Eclipse sill & top track. Fits into sills above.

PVD brass (TG) finish is custom order, call for manufacturing time.

FOR OUTSWING & INSWING DOORS

Flushbolt cup used with floor channel and ADA sill

Lengths available: 111”, 147”, 183”, 222”, 294” (2819mm, 3754mm, 4648mm, 5639mm, 7468mm). Order flushbolt cups and sill assembly end gaskets separately.

© Copyright 2018 • Eclipse Architectural® 3

INDEXKT190C84B 2, 33KT190C84BL 2, 33KT190C84W 2, 33KT190C96B 2, 33KT190C96BL 2, 33KT190C96W 2, 33KT190C108B 2, 33KT190C108BL 2, 33KT190C108W 2, 33KT190C120B 2, 33KT190C120BL 2, 33KT190C120W 2, 33KT23BLVE 2, 32KT23DV 2, 32KT23D-RADIUS 19, 32DS369A7145BL 2, 8, 9, 10, 11DS416B 2, 5, 9, 12DS416BL 2, 5, 9, 12DS416W 2, 5, 9, 12DS434B 2, 15, 16DS434B81 2, 15, 16DS434B96 2, 15, 16DS434BL 2, 15, 16DS434BL81 2, 15, 16DS434BL96 2, 15, 16DS434W 2, 15, 16DS434W81 2, 15, 16DS434W96 2, 15, 16DS415B96 2DS415B144 2DS415W96 2DS415W144 2DS415BL144 2KT769D 21KT779D 20KT70D 17KT70D-RADIUS 17KT75C 2, 14, 15, 16KT75D 2, 14, 15, 16KT749BRONZE 2, 23, 24KT749DCH 2, 23, 24KT750SPC 2, 8, 10KT760SPC 10, 11, 16KT770SPC 9, 11KT780SPC 8, 9KT752E3FIRD 16KT788E3D 16KT841REDUCER 9, 11KTDBSY 24KTDBOC200NRTG 22KTDBOC200NRQ 22KTDBOC200NRX 22KTDBOC400NRTG 22KTDBOC400NRQ 22

KTDBOC400NRX 22KTDBOE200NRTG 22KTDBOE200NRQ 22KTDBOE200NRX 22KTDBOE400NRTG 22KTDBOE400NRQ 22KTDBOE400NRX 22KTDBOE600NRTG 22KTDBOE600NRQ 22KTDBOE600NRX 22KTDBOE1000NRTG 22KTDBOE1000NRQ 22KTDBOE1000NRX 22KTDBOT200NRTG 23KTDBOT200NRQ 23KTDBOT200NRX 23KTDBOT400NRTG 23KTDBOT400NRQ 23KTDBOT400NRX 23KTDBOT600NRTG 23KTDBOT600NRQ 23KTDBOT600NRX 23KTDBOT1000NRTG 23KTDBOT1000NRQ 23KTDBOT1000NRX 23KTE3CICSTG 36, 37KTE3CICSOL 36, 37KTE3CICSS 36, 37KTE3CLCSTG 36, 37KTE3CLCSOL 36, 37KTE3CLCSS 36, 37KTE3CPSTG 36, 37KTE3CPSOL 36, 37KTE3CPSS 36, 37KTE3CRCSTG 36, 37KTE3CRCSOL 36, 37KTE3CRCSS 36, 37KTE3EHTG 36, 37KTE3EHOL 36, 37KTE3EHS 36, 37KTE3HTG 36, 37KTE3HOL 36, 37KTE3HS 36, 37KTE3HHTG 36, 37KTE3HHOL 36, 37KTE3HHS 36, 37KTE3HHNHTG 36, 37KTE3HHNHOL 36, 37KTE3HHNHS 36, 37KTE3HNHTG 36, 37KTE3HNHOL 36, 37KTE3HNHS 36, 37KTE3HHNHSTG 36, 37KTE3HHNHSOL 36, 37

KTE3HHNHSS 36, 37KTE3HHTG 36, 37KTE3HHSOL 36, 37KTE3HHSS 36, 37KTE3HNHSTG 36, 37KTE3HNHSOL 36, 37KTE3HNHSS 36, 37KTE3HSTG 36, 37KTE3HSOL 36, 37KTE3HSS 36, 37KTE3WPSTG 36, 37KTE3WPSOL 36, 37KTE3WPSS 36, 37DSP108-35BL 2, 5, 12, 13DS7145-270BL 14,20, 21, 22

Misc / Spare & Replacement PartsKT750GASKET 2KT768GASKET 2, 32KTDBPCS 22KTDBSPQ 22, 23, 24KTDBSPS 22, 23, 24KTE2DBFORB 22, 23, 24KTE3CBPIVOTH 36KTE3DJ 2KTE3HGASKET 4KTE3SCREWTG 37KTE3SCREWOL 37KTE3SCREWSS 37KTE3WPCUPQ 36KTE3WPCUPS 36KTEMAG 35KTDBSPOCX or Q 22KT740DHC 33KT740DHD 33KT745ESPX 5, 7KT745ESPQ 5, 7KTDCAS 34KTDCAOL 34

TwinpointECLT2TRSN0924 27, 28,29,30ECLT2TRSN0930 27, 28,29,30ECLT2NS 27ECDF3SHN 27ECDF4SHNS 27ECLTBC8S 27, 30ECLT2RB 27, 29ECLTSP8SS 27, 30ECLTSP8OL 27, 30

LegendX Satin aluminumTG PVD brass (custom order)OL PVD bronzeQ Powder coat bronzeSS Stainless steelC Clear anodizedD Bronze anodizedB BrownBVE Black vinyl extrusionBL BlackDHC Satin / clearDHD Bronze anodizedDHBL Black powder coatDHW White powder coatBL Black pile

SwingIS InswingOS Outswing

MiscSPC Sill protective coverGASKET A/B gasketFORB Router bitFIR Fir top mouldDJ Drill jig for hinges

Lengths For Flushbolts7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

HardwareICS Intermediate carrier 3 piece setLCS Left carrier 2 piece setRCS Right corner 2 piece setPS Pivot top & bottom 2 piece setEH “D” pull handle 1 pieceH Hinge flat with handle 1 pieceHH Hinge offset with handle 1 pieceHNH Hinge flat no handle 1 pieceHHNH Hinge offset no handle 1 pieceHS Hinge flat with handle 3 piece set HHS Hinge offset with handle 3 piece setHNHS Hinge flat no handle 3 piece setHHNHS Hinge offset no handle 3 piece setWP Wall pivot

Misc / Spare Hardware ComponentsPCS End cap for OC flushbolts pinSP Striker plateCBP Bottom pivot housingPCP Pivot capSCREW Screws for hinge flapsSPOC Striker plate OC flushboltTPPLATE Top pivot mounting plateDH Door hold

Flushbolts

KTDBOT For outswing applicationKTDBOC For inswing application installed at

bottom of panelsKTDBOE For inswing application installed at top

of panelsKTDBSY For outswing application


2-7/16” (62mm)

2” (50.2mm)

neopreneblackgasket

1-17/32” (39mm)to face of door

5/16” (8mm)from center of

top track to face of door

centre of track tocentre of channel23/32” (18.5mm)

3/8” (9.5mm) panelclearance to sill

7/8” (22mm)

15/16”(24mm)

19/32” (15mm)

3/16” (5mm)panel clearance

to head

EXTERIOR INTERIOR

KTE3HGASKETAdhesive blackgasket for optimum sealing performance around all hinge flaps.

2-3/8” (60mm) bottom of door to bottom of hinge flap when using flush bolts.

5-29/32” (150mm) when using twinpoint lock.

top of doorto top of hinge

flap 19/32” (15mm)

2-3/8” (60mm) top of door to top of hinge flap when using flush bolts.

5-29/32” (150mm) when using twinpoint lock.

E3™ ARCHITECTURAL DETAIL

R.O.

panel width

panel thickness

half offsethinges

outswingpanels

5/8” (16mm)

4 one way configuration

19/32” (15mm)hinge offset

panel offset19/32” (15mm)

5-1/2” (139.7mm)

1-5/16” (33.5mm)

Centre of top track to centre of bottom channel 23/32” (18.5mm)

EXTERIOR INTERIOR

KT795 sill

KT75 top track

KT70 top track

© Copyright 2018 • Eclipse Architectural® 5ALL DRAWINGS NO SCALE

E3™ ARCHITECTURAL DETAIL

9/32” (7mm) jamb clearance 5/32” (4mm) panel to panel gap

5/32” (4mm) panel to panel gap11/16” (17.5mm) jamb thickness

5/32” (4mm) panel to panel gap

9/32” (7mm) jamb clearance

Outswing Application

DS416 & DSP108-35BL Weatherseal Detail for 1-3/4” (44.5mm) Door

flushbolt machiningcentered at stile width

RO.5 (R1/64)

pivot doorweathersealapplication

11/16”(17.5mm)

11/16”(17.5mm)

1/8”(3.2mm)

3/8”(9.5mm)

1/8” (2.5mm) 9/16” (14mm)

5/32” (4mm)

DSP10835BL

DS416

3/8”(9.5mm)

1/8”(3.5mm)

6-9/16”(166.7mm)

5/16”(7.4mm)

9/32”(7mm)

3/4” (18.5mm)

5/16” (7.4mm)5/16” (7.4mm)

5/16”(7.4mm)

1/8” (2.8mm)

1-3/4”(44.5mm)

1-7/16” (36mm)9/16” (14mm)

4-3/8”(110.6mm)

39/64”(15.4mm)

1-5/8”(41mm)

CL

CL

CLREF

REF

latching door to jamb, weatherseal & strike plate application for 3L, 3R, 5L, 5R, 7L or 7R.

KT745extended strike plate for 1-3/4” (44.45mm) door thickness only. Used with standard style lock set.

DS434

4-5/16”(107mm)

top pivot

wall pivot

bottom pivot

jamb or pivot door basic door basic door leading door

bottom guide

right hand carrierintermediate

carrier sethinge setfacing inside

hingesetfacinginside

EXTERIOR

INTERIOR

9/32

” (7m

m)

jamb

clear

ance

9/32

” (7m

m)

jamb

clear

ance

4L (4 doors folding left) Exterior View (all doors are same width)

NOTE: when using 2-1/4” (57mm) panel thickness on 2L2R and 4L4R configurations, the gapping between the 2 meeting panels should be 1/2” (12.7mm). Hinge flaps on the meeting stiles should be machined into the edge of the door.

4-5/16”(110mm)

4”(107mm)

Extended Strike Plate for 1-3/4” Door Only.Used with standardstyle lock set.

KT745ESPXSatin finish

KT745ESPQBronze powder coat

LHDSSPLK73160LH

Used only with MultiPoint lock setExtended Jamb Strike

RHDSSPLK73260RH


2L

2L1R

3L

3L1R

4L

4L1R

3L2R

5L

3L3R

7L

4L3R

5L2R

5L3R

6L

1x KTE3CPS pivot set1x KTE3CRCS right carrier set1x KTE3HS hinge set2x KTDB non-keyed flushbolt

RCS

HS

PSWPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPS

WPSPS PS

PS

PS PS

PS

PSPS

PS PS

PS

PS PS

PS PS

PS

PS

PS

PS

HS

HHS

HHS

HHS HHS

HHS HHS

HHS HS

HS

HS

HS

HS

HHS

HHS

HHS HHS

HHS

HHS

RCS

ICS

ICS

ICS

ICS

ICS

ICS ICS

ICS ICS

ICS

HHS

ICS

ICS ICS

ICS

HHS

ICSICS

RCS

RCS

LCS

LCS

RCS

2x KTE3CPS pivot set1x KTE3CRCS right carrier set1x KTE3HS hinge set2x KTDB non-keyed flushbolt

1x KTE3CPS pivot set1x KTE3CICS intermediate carrier set1x KTE3HHS half offset hinge set2x KTDB non-keyed flushbolt


1x KTE3CPS pivot set1x KTE3CICS intermediate carrier set1x KTE3CRCS right carrier set2x KTE3HHS half offset hinge set4x KTDB non-keyed flushbolt


2x KTE3CPS pivot set1x KTE3CICS intermediate carrier set1x KTE3CLCS left carrier set1x KTE3HS hinge set1x KTE3HHS half offset hinge set4x KTDB non-keyed flushbolt

1x KTE3CPS pivot set2x KTE3CICS intermediate carrier set1x KTE3HS hinge set1x KTE3HHS half offset hinge set4x KTDBnon-keyed flushbolt



2x KTE3CPS pivot set2x KTE3CICS intermediate carrier set1x KTE3CLCS left carrier set2x KTE3HS hinge set1x KTE3HHS half offset hinge set6x KTDB non-keyed flushbolt

2x KTE3CPS pivot set3x KTE3CICS intermediate carrier set1x KTE3HS hinge set2x KTE3HHS half offset hinge set8x KTDB non-keyed flushbolt

WPSPS

HS HS

HHS

HHS

ICS ICS ICS 1x KTE3CPS pivot set3x KTE3CICS intermediate carrier set2x KTE3HS hinge set1x KTE3HHS half offset hinge set6x KTDB non-keyed flushbolt

FB

WPSPS

HHS

ICS ICS RCS 1x KTE3CPS pivot set2x KTE3CICS intermediate carrier set1x KTE3CRCS right carrier set1x KTE3HS hinge set2xKTE3HHS half offset hinge set6x KTDB non-keyed flushbolt

DH

ESP

DH

DH

DH

ESP

DH DH

DH

ESP

DH

DH

DH DH

DH

HS HHS

FB

FB

FB

FB FB

FB FB

FB FB

FB FB

FB FB FB

FB FB FB

FB FB FB

FB FB FB

FB FB FB

FB FB

1x KTE3WPS middle wall pivot














FB

FB

FB

FB

Passage Set Lock by Other

Flushbolts Top & Bottom

Twinpoint Option to FB

Astragal

Door Hold

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

LEGEND

4-5/16”

4”

Extended strike plate for 1-3/4” door only



this configurationnot accessible from exterior



1x KTE3CLCSleft carrier setPer pair of doors:

1x KTE3CRCSright carrier set1x KTE3HShinge set2x KTDBnon-keyed flushbolt

Hardware LegendPS Pivot setWPS Wall pivot setICS Intermediate carrier setLCS Left carrier setRCS Right carrier setHHS Half offset hinge setHS Hinge set (flat)FB FlushboltESP Extended strike plateDH Door holdMAG MagnetTP Twinpoint

Floating Door PairsINTERIOR

EXTERIOR

may be reversed

HARDWARE LIST FOR DOOR CONFIGURATIONS Passage Set/Lock, Flushbolt, Astragal & Hardware Placement For Outswing ApplicationsFrom Left To Right

Configuration is always determined when viewing system from exterior side, going from left to right.

Use “D” pull handle on exit door (outswing system) where passage set / lock not required. Use flushbolts top and bottom to lock door from the inside only. NOTE: exit door not accessible from exterior.

INTERIOR

EXTERIOR

OUTSWING

INSWING

INTERIOR

EXTERIOR

3L

3LI

How To Determine Swing Of Systems

FB FB3L INTERIOR

EXTERIOR

outswing application “D” pull handle option

Use one “D” pull handle on each pair of inswing doors to pull open and close doors.Inswing application “D” pull handle option

FB FB5RI

INTERIOR

EXTERIOR


1x KTE3CPSpivot set2x KTE3CICSintermediate carrier set1x KTE3HShinge set1x KTE3HHShalf offset hinge set4x KTDBnon-keyed flushbolt

2x KTE3CPSpivot set2x KTE3CICSintermediate carrier set1x KTE3CLCSleft carrier set3x KTE3HHShalf offset hinge set6x KTDBnon-keyed flushbolt

1x KTE3CPSpivot set3x KTE3CICSintermediate carrier set2x KTE3HShinge set1x KTE3HHShalf offset hinge set6x KTDBnon-keyed flushbolt

2x KTE3CPSpivot set2x KTE3CICSintermediate carrier set1x KTE3CRCSright carrier set2x KTE3HShinge set1x KTE3HHShalf offset hinge set6x KTDBnon-keyed flushbolt

1x KTE3CPSpivot set3x KTE3CICSintermediate carrier set1x KTE3CLCSleft carrier set2x KTE3HShinge set2x KTE3HHShalf offset hinge set8x KTDBnon-keyed flushbolt

1x KTE3CPSpivot set1x KTE3CLCSleft carrier set1x KTE3HShinge set2x KTDBnon-keyed flushbolt

2x KTE3CPSpivot set1x KTE3CLCSleft carrier set1x KTE3HShinge set2x KTDBnon-keyed flushbolt

1x KTE3CPSpivot set1x KTE3CICSintermediate carrier set1x KTE3HHShalf offset hinge set2x KTDBnon-keyed flushbolt

2x KTE3CPSpivot set1x KTE3CICSintermediate carrier set1x KTE3HHShalf offset hinge set4x KTDBnon-keyed flushbolt

2x KTE3CPSpivot set1x KTE3CLCSleft carrier set1x KTE3CRCSright carrier set2x KTE3HShinge set4x KTDBnon-keyed flushbolt



2x KTE3CPSpivot set1x KTE3CICSintermediate carrier set1x KTE3CRCSright carrier set1x KTE3HShinge set1x KTE3HHShalf offset hinge set4x KTDBnon-keyed flushbolt

RCS

RCS

RCS

LCS

LCS

LCS

LCS

LCS

LCS

LCS

HS

HS

HS

HS

HS

HS

HS

HS

HSHS

HS

PS

PS

PS

PS

PSPS

PS

PSPS

PS

PS PS

PS

PS PS

PS

PS

PS

PS

PS

HHS

HHS

HHS

HHS HHS

HHS

HHS

HHS

HS

HHS

HHS HHS

HHS

HHSHHS

HHS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS ICS

ICS

ICS ICS ICS

ICS

ICS

ICS

ICS

WPS

WPS

WPSWPS

WPS

WPS

WPS

WPS

WPS

WPSWPS

WPS

WPS

WPS

WPS WPS

WPS

WPS

WPS

WPS

DHESP

DH

DHESP

DH

DH

DH

DH

FB

FB

FB

FBFB

FB FB

FB FB

FB FB

FB FB

FB FB

FB FBFB

FB FBFB

FB FBFB

FB FBFB FB

1x KTE3WPSmiddle wall pivot













Hardware LegendPS Pivot setWPS Wall pivot setICS Intermediate carrier setLCS Left carrier setRCS Right carrier setHHS Half offset hinge setHS Hinge set (flat)FB FlushboltESP Extended strike plateDH Door holdMAG MagnetTP Twinpoint

FB

DH

Passage Set Lock by Other

Flushbolts Top & Bottom

Twinpoint Option to FB

Astragal

Door Hold

Legend

Extended Strike Plate for 1-3/4” Door Only.Used with standardstyle lock set.



panel width

panel thickness

half offsethinges

outswingpanels

5/8” (16mm)

4 one way configuration

19/32” (15mm)hinge offset

pane

l offs

et19

/32”

(15m

m)

This configuration not accessible from exterior




1L2R

3R

1L3R

2L2R

1L4R

4R

2L3R

5R

3L4R

7R

2L5R

8R

2R

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

INTERIOR

EXTERIOR

may be reversed

LHDSSPLK73160LH

Used only with MultiPoint lock set

Extended Jamb Strike

RHDSSPLK73260RH

4-5/16”

4”

HARDWARE LIST FOR DOOR CONFIGURATIONS Passage Set/Lock, Flushbolt, Astragal & Hardware Placement For Outswing ApplicationsFrom Left To Right

intermediate carrier & guide set left carrier & guide setINTERIOR

EXTERIOR

pivot set

flushbolts flushbolts

half offset hinge set flat hinge setpassage set

pivot set

jamb doorjamb doorbasic door

leading door

service door

door hold

Hardware Application 3L2R

© Copyright 2018 • Eclipse Architectural®FULL SCALE EXCEPT AS NOTED8

19/3

2”

(15m

m)

viny

l cha

nnel

inse

rt1-

3/16

”(3

0mm

)

wee

p ho

le

wee

p ho

les

2-5/

32”

(54m

m)

1-23

/32”

(44m

m)

FIR

OR O

AK

TOP

WOO

D SU

BSTR

ATE

13/3

2” (1

0mm

)

6-9/

16”

(166

.7m

m)

jam

b lin

e

8” (2

03m

m)

1/4”

(6m

m)E3

bot

tom

hi

nge

& g

uide

6-9/

16”

(166

.7m

m)

jam

b lin

e

KT795COVERBLVE

PVC

inse

rt, b

lack

2-1

/4”

(57m

m)

KT797S

ill

3/8”

(9

.5m

m)

DS434

Kerf

seal

DS369A7145BL

Alum

inum

T-s

lot

extru

sion

with

gra

ypi

le in

sert

cent

re o

f top

trac

k to

cen

tre o

f bo

ttom

cha

nnel

=

23/3

2” (1

8.5m

m)

ECLIPSE, KT797 (8") OUTSWING SILL SYSTEM FOR 2-1/4" (57MM) DOOR THICKNESS

New Generation Sill with Flushbolt Pin Channel. Sill is fabricated as shown by Eclipse Architectural.Extrusion Alloy 6063 T5. Actual Full Sill Width: 8" (203mm) Channel Sill for Flushbolt or Twinpoint.

KT797E3FIRC Clear anodizedKT797E3FIRD Bronze anodized

KT7

80

SP

CPr

otec

tive

vinyl

sill c

over

for s

ill no

se

KT7

50

SP

CPr

otec

tive

vinyl

sill c

over

for i

nter

ior f

ir to

p

EXTE

RIOR

DBOT

Flu

shbo

lt

Two

lock

ing

optio

ns: Tw

inpo

int

© Copyright 2018 • Eclipse Architectural® FULL SCALE EXCEPT AS NOTED 9

ECLIPSE KT795 (8”) OUTSWING SILL SYSTEM FOR 1-3/4” (44.5MM) DOOR THICKNESS

New Generation Sill with Flushbolt Pin Channel. Sill is fabricated as shown by Eclipse Architectural.

Extrusion Alloy 6063 T5. Actual Full Sill Width: 8” (203mm) Channel Sill for Flushbolt or Twinpoint.

19/3

2”

(15m

m)

viny

l cha

nnel

inse

rt1-

3/16

”(3

0mm

)

wee

p ho

le

wee

p ho

les

2-5/

32”

(54m

m)

2-7/

32”

(57m

m)

WOO

D SU

BSTR

ATE

3/8”

(9

.5m

m)

1-3

/4”

(44.

5mm

)

13/3

2” (1

0mm

)

8” (2

03m

m)

1/4”

(6m

m)E3

bot

tom

hi

nge

& g

uide

6-9/

16”

(166

.7m

m)

jam

b lin

e

DS434

Kerf

seal

KT841

Redu

cer

KT795S

ill

KT795COVERBLVE

PVC

inse

rt, b

lack

6-9/

16”

(166

.7m

m)

jam

b lin

e

cent

re o

f top

trac

k to

cen

tre o

f bo

ttom

cha

nnel

=

23/3

2” (1

8.5m

m)

DS369A7145BL

Alum

inum

T-s

lot

extru

sion

with

gra

ypi

le in

sert

FIR

OR O

AK

TOP


KT7

80

SP

CPr

otec

tive

vinyl

sill c

over

for s

ill no

seK

T77

0S

PC

Prot

ectiv

e vin

yl sil

l cov

er fo

r int

erio

r fir

top

EXTE

RIOR

DBOT

Flu

shbo

lt

Two

lock

ing

optio

ns: Tw

inpo

int


1-3/

16”

(30m

m)

6-9/

16”

(167

mm

)

6-9/

16”

(166

.7m

m)

jam

b lin

e

19/3

2”

(15m

m)

13/3

2”(1

0mm

)1/

4” (6

mm

)

viny

l cha

nnel

inse

rt

wee

p ho

les

wee

p ho

le

2-1

/4”

(57m

m)

1-23

/32”

(44m

m)

2-5/

32”

(54m

m)

WOO

D SU

BSTR

ATE

KT777S

ill

3/8”

(9

.5m

m)

DS434

Kerf

seal

KT795COVERBLVE

PVC

inse

rt, b

lack

6-9/

16”

(166

.7m

m)

jam

b lin

e

E3 b

otto

m

hing

e &

gui

de

cent

re o

f top

trac

k to

cen

tre o

f bo

ttom

cha

nnel

=

23/3

2” (1

8.5m

m)

DS369A7145BL

Alum

inum

T-s

lot

extru

sion

with

gra

ypi

le in

sert

FIR

OR O

AK

TOP


Extrusion Alloy 6063 T5. Actual Full Sill Width: 6-9/16” (166.7mm) Channel Sill for Flushbolt or Twinpoint.

ECLIPSE KT777 (6-9/16”) OUTSWING SILL SYSTEM FOR 2-1/4” (57MM) DOOR THICKNESS


KT7

50

SP

CPr

otec

tive

vinyl

sill c

over

for i

nter

ior f

ir to

pK

T76

0S

PC

Prot

ectiv

e vin

yl sil

l cov

er fo

r sill

nose

EXTE

RIOR

DBOT

Flu

shbo

lt

Two

lock

ing

optio

ns: Tw

inpo

int


1-3/

16”

(30m

m)

6-9/

16”

(167

mm

)

6-9/

16”

(166

.7m

m)

jam

b lin

e

19/3

2”

(15m

m)

13/3

2” (1

0mm

)1/

4” (6

mm

)

viny

l cha

nnel

inse

rt

wee

p ho

les

2-5/

32”

(54m

m)

WOO

D SU

BSTR

ATE

1-3

/4”

(44.

5mm

)

2-7/

32”

(57m

m)

KT775S

ill

KT841

Redu

cer

3/8”

(9

.5m

m)

DS434

Kerf

seal

KT795COVERBLVE

PVC

inse

rt, b

lack

6-9/

16”

(166

.7m

m)

jam

b lin

e

wee

p ho

le

E3 b

otto

m

hing

e &

gui

de

cent

re o

f top

trac

k to

cen

tre o

f bo

ttom

cha

nnel

=

23/3

2” (1

8.5m

m)

DS369A7145BL

Alum

inum

T-s

lot

extru

sion

with

gra

ypi

le in

sert

FIR

OR O

AK

TOP


Extrusion Alloy 6063 T5. Actual Full Sill Width: 6-9/16” (166.7mm) Channel Sill for Flushbolt or Twinpoint.

ECLIPSE KT775 (6-9/16”) OUTSWING SILL SYSTEM FOR 1-3/4” (44.5MM) DOOR THICKNESS


KT7

70

SP

CPr

otec

tive

vinyl

sill c

over

for i

nter

ior f

ir to

pK

T76

0S

PC

Prot

ectiv

e vin

yl sil

l cov

er fo

r sill

nose

EXTE

RIOR

DBOT

Flu

shbo

lt

Two

lock

ing

optio

ns: Tw

inpo

int


5/16

”(8

mm

)

19/6

4”(7

.5m

m)

11/1

6”(1

7.5m

m)

1/8”

(3m

m)

1/8”

(3m

m)

11/1

6”(1

7.5m

m)

9/16

”(1

5mm

)

1-3/

32”

(28m

m)

3/8”

(9.5

mm

)

4-27

/32”

(123

mm

)

6-9/

16”

(167

mm

)

CL

9/32

”(7

mm

)

7/64

”(2

.5m

m)

7/64

” (2

.8m

m)

DS416ke

rf se

al in

sert

9/16

”(1

4mm

)

1-7/

16”

(36m

m)

Flus

hbol

t mac

hini

ng d

epth

:1)

KTDBSY9

/16”

(14m

m)

2) KTDBOC

43/6

4” (1

7mm

)3)

KTDBOE4

3/64

” (1

7mm

)4)

KTDBOT3

/4”

(19m

m)

5/16

” (8

mm

)

2-1/

4”(5

7mm

)

DS43

4ke

rf se

alin

sert

R =

1/64

” (0

.5m

m)

Drop

bolt

mac

hini

ng

cent

ered

at s

tile

wid

th w

ith

dedi

cate

d ro

uter

bits

.

NOSCALE

9/32

”(7

mm

)

Mul

tipoi

ntla

tch

Mul

tipoi

ntfa

ce p

late

notc

hre

quire

din

jam

b

DSP10835BL

pile

wea

ther

sesa

l

5/32

”(4

mm

)

DS43

4ke

rf se

alin

sert

REF

EXTERIOR

LH DSSPLK73160LH

Used

onl

y w

ithM

ultiP

oint

lo

ck s

et

NOSCALE

Exte

nded

Jam

b St

rike

RHDSSPLK73260RH

E3™ JAMB FOR 2-1/4” (57MM) DOOR THICKNESSExterior E3 Folding Door, Outswing Application

Actual machining for flushbolts (face plate)1-27/64” x 7-7/8” (36mm x 200mm)1-27/64” x 15-3/4” (36mm x 400mm)1-27/64” x 23-5/8” (36mm x 600mm)1-27/64” x 39-3/8” (36mm x 1000mm)

DBOT FlushboltTwo locking options:

TwinpointKT

E2DB

FORB

Flus

hbol

t ro

uter

bit

is av

ailab

le


11/1

6”(1

7.5m

m)

1/8”

(3m

m)

1/8”

(3m

m)

11/1

6”(1

7.5m

m)

9/16

”(1

5mm

)

1-5/

8”(4

1mm

)

3/8”

(9.5

mm

)

4-3/

8”(1

10.6

mm

)

6-9/

16”

(167

mm

)

DS434

kerf

seal

inse

rt

CL

CL

CL

REF

EXTERIOR

9/32

”(7

mm

)

9/32

”(7

mm

)

Drop

bolt

mac

hini

ng

cent

ered

at s

tile

wid

th

with

ded

icat

ed ro

uter

bits

. 7/64

”(2

.5m

m)

R =

1/64

” (0

.5m

m)

7/64

” (2

.8m

m)DS416

kerf

seal

inse

rt

9/16

”(1

4mm

)

1-7/

16”

(36m

m)

23/3

2” (1

8.5m

m)

Flus

hbol

t mac

hini

ng d

epth

:1)

KTDBSY9

/16”

(14m

m)

2) KTDBOC

43/6

4” (1

7mm

)3)

KTDBOE4

3/64

” (1

7mm

)4)

KTDBOT3

/4”

(19m

m)

5/16

” (8

mm

)

5/16

”(8

mm

)

19/6

4”(7

.5m

m)

1-3/

4”(4

4.5m

m)

notc

hre

quire

din

jam

b

5/32

”(4

mm

)

DS434

kerf

seal

inse

rt DSP10835BL

pile

wea

ther

sesa

l

Mul

tipoi

ntla

tch

Mul

tipoi

ntfa

ce p

late

LH DSSPLK73160LH

Used

onl

y w

ithM

ultiP

oint

lo

ck s

et

NO

SCA

LE

Exte

nded

Jam

b St

rike

RHDSSPLK73260RH

NO

SCA

LE

4-5/

16”

(110

mm

)

4”(1

07m

m)Ex

tend

ed S

trik

e Pl

ate

KT745ESPX

Satin

fini

shKT745ESPQ

Bron

ze p

owde

r coa

t

for 1

-3/4

” do

or o

nly.

Used

with

sta

ndar

dst

yle

lock

set

.NOSCALE

E3™ JAMB FOR 1-3/4” (44.5MM) DOOR THICKNESSExterior E3 Folding Door, Outswing Application.


DBOT FlushboltTwo locking options:

Twinpoint

KTE2

DBFO

RB Fl

ushb

olt

rout

er b

it is

avail

able


KT75 TOP TRACK FOR 2-1/4” (57MM) DOOR THICKNESS E3™ HEADERExterior E3 Folding Door, KT75 Outswing Application Only. Channel Top Track for Flushbolt or Twinpoint.

New Generation Top Track with Flushbolt Pin Channel.

6-9/

16”

(167

mm

)

5-7/

8” (1

50m

m)

11/1

6”

(17m

m)

2-21

/32”

(6

8mm

)

3/16

” (5

mm

)

19/3

2”

(15m

m)

E3 b

otto

m

hing

e &

gui

de

6-9/

16”

(166

.7m

m)

jam

b lin

e

11/1

6”

(18m

m)

1-31

/32”

(5

0mm

)

11/3

2”

(9m

m)

1/8”

(3m

m)

3/16

” (5

mm

)11

/16”

(18m

m)

19/3

2”

(15m

m)

6-9/

16”

(166

.7m

m)

jam

b lin

e

3/8”

(9.5

mm

)

19/3

2”

(15m

m)

1-1/

8” (2

8mm

)

DS434

Kerf

seal

KT795COVERBLVE

PVC

inse

rt, b

lack

DS7145270BL

Pile

wea

ther

seal

, bla

ck

KT75C ClearKT75D Bronze anodized

EXTE

RIOR

DBOT

Flu

shbo

ltTw

o lo

ckin

g op

tions

:Tw

inpo

int


KT75 TOP TRACK FOR 1-3/4” (44.5MM) DOOR THICKNESS E3™ HEADERExterior E3 Folding Door, KT75 Outswing Application Only. Channel Top Track for Flushbolt or Twinpoint.

New Generation Top Track with Flushbolt Pin Channel.

6-9/

16”

(167

mm

)

5-7/

8” (1

50m

m)

11/1

6”

(18m

m)

1-31

/32”

(5

0mm

)

1/8”

(3m

m)

1/8”

(3m

m)

3/8”

(9.5

mm

)11/3

2” (9

mm

)

1-5/

8” (4

1mm

)

3/16

” (5

mm

)11

/16”

(18m

m)

11/3

2”

(9m

m)

11/1

6”

(17m

m)

2-21

/32”

(6

8mm

)

3/16

” (5

mm

)

19/3

2”

(15m

m)

6-9/

16”

(166

.7m

m)

jam

b lin

e

19/3

2”(1

5mm

)

6-9/

16”

(166

.7m

m)

jam

b lin

e

E3 b

otto

m

hing

e &

gui

de

DS

434

Kerf

seal

KT7

95C

OV

ERB

LVE

PVC

inse

rt, b

lack

DS

7145

-270

BL

Pile

wea

ther

seal

, bl

ack

KT75C Clear anodizedKT75D Bronze anodized

EXTE

RIOR

DBOT

Flu

shbo

ltTw

o lo

ckin

g op

tions

:Tw

inpo

int


KT752 SERIES E3™ 5-1/2” (139.7MM) OUTSWING SILL SYSTEMONLY FOR 1-3/4” (44.5mm) Door Thickness & 4-9/16” (115.8 mm) Wall Thickness

NOTE: Door height plus 4-1/4”: (107.9mm) = R.O. (from finished floor line to R.O. header) when using Eclipse frame specs.

2-1/8” (54mm)

INTERIOR

substrate

1-3/16” (30mm)

interior fir topmouldDS434sill weatherseal

white, brown or black

5-1/2” (140 mm)

KT752E3 aluminum sill, clear or bronze anodized

EXTERIOR

weep hole

weep holes

bottom rollerguide channel

vinyl channel insert

channel for flushbolt pin

1-1/16”(27mm)

KT788 E3 ADA LOWRISE ALUMINUM SILL FOR INSWING & OUTSWING DOORS

KT788E3D Bronze anodized only

KT752E3FIRD Outswing sill with fir top, bronze anodized

ADA Compliant

KT760SPCProtective vinyl sill cover for sill nose

BRONZE ANODIZED ONLY

EXTERIOR

NO SCALEUse KTDBSY series flush bolt

23/32”(18.5mm)

6-9/16” (166.7mm)

1/2”(12.7mm)

15/16”(23.6mm)

19/32”(15mm)

1-3/4”(44.45mm)

NO SCALE

drill round hole for pin

no flush bolt cup used

23/32”(18.5mm)

6-9/16” (166.7mm)

1/2”(12.7mm)15/16” (23.6mm)

finished floor line

19/32”(15mm)

KTDBSYFlush bolt

KT749flush bolt cup used,custom drilling required in sill

thermal break

1-3/4” (44.45mm) finished floor line

NO SCALE

Slopes of threshold may be ripped off to achieve flush sill application.


E3™ CORNER UNIT APPLICATION

RADIUS APPLICATION (KT70 TRACK ONLY)

outside corner panel of 1L, 3L, 5L & 7L configurations

Mitre cut sill and head to suit length of openingoutside corner

panel of 4R, 6R & 8R configurations

Apply lock set and/or deadbolt to active door or use flushbolts top & bottom (shown). If using interior flushbolts access from exterior not possible.

door stop

E3 sillINTERIOR VIEW EXTERIOR VIEW

DS416 seal

KT190astragal

4R3L

OUTSIDECORNER

Center point

DOORS

DOORS

KT70D-RADIUS bronze anodized top track (CUSTOM ORDER)*KT23C-RADIUS clear anodized floor channel (CUSTOM ORDER)*KT23D-RADIUS bronze anodized floor channel (CUSTOM ORDER)**CUSTOM ORDER, CALL FOR MANUFACTURING TIME.All supplied as one length only 120” (3048mm)

Minimum Radius14’-7” / 175” (4445mm)to inside face of top track.(Warranty on hardware void if under minimum radius)

RC

X

CP

Arc Length (AL)

R = Radius (length from the C.P. to the edge of the circle)

C = chord lengthX = height of crownCP = center pointAL = arc length

EXTERIOR INTERIOR

EXTERIOR

INTERIOR


KT779D E3™ SILL SYSTEM FOR 2-1/4” (57MM) DOOR THICKNESSWater Return All Aluminum Sill System, Thermally Broken For Inswing Folding Doors (Only KT70 Top Track can only be used on inswing application)

10˚ slope

6-9/16” (166.7mm)

2-7/16” (62mm) 11/16”(17.5mm)

11/16”(17.5mm)

2-11/16”(67.7mm)

3/8”(9mm)

2”(50.2mm)

11/16”(17.5mm)

1/4”(6mm)

3/8”(9.5mm) striker plate

Use KTDBOESeries flush bolt

flushbolt pin

KT70E3aluminum top track

DS434kerf seal insert

3/8” (9.5mm)

4-7/8” (123.2mm)

7/16” (10.5mm)

23/32” (18.5mm) center line of top trackto center line of bottom sill channel

2-1/4” (57mm)3-15/16” (99.8mm)

5/16”(8mm)

3/16” (5mm)

1-1/8” (28mm)

DS369

3/8" (9.5mm)

11/16"(18mm)

2-1/16” (53.1mm)

1-11/16” (43.5mm)

7/16"(10.8mm)

3/16”(4mm)

1/4”(7mm)

2-1/8" (54mm)

6-9/16” (166.7mm)I-Strut Thermal break

PVC channel filler

1” (25.7mm)


CL CL

1-29/32” (48.4mm)

EXTERIOR INTERIOR

WEEPHOLE

WEEPHOLE

WEEPHOLE

KT779DSill

WEEPHOLE

1/8”(3.17mm)

bronze anodized only

Use KTDBOCSeries flush bolt

KTDBSPOCProtective strike plate

DS7145270BLPile weatherseal, black



6-9/16” (166.7mm)

2-11/16”(67.7mm)

11/16”(17.5mm)

2”(50.2mm)

3/8”(9mm)

1/4”(6mm)

3/8”(9.5mm)

1/8” (3.17mm)11/16”

(17.5mm)

center lineCLof top track

CLCL

striker plate

flushbolt pin

KT70E3aluminum top track

2-7/16” (62mm) 11/16”(17.5mm)

3/16” (5mm)

1-29/32” (48.4mm)

5/16”(8mm)

4-3/8” (110.6mm)

3/8” (9.5mm)

1-5/8” (40.7mm)

7/16” (10.5mm)3-15/16” (99.8mm)

EXTERIOR INTERIOR

6-9/16” (166.7mm)I-Strut Thermal break

PVC channel filler

1” (25.7mm)KT769DSill

WEEPHOLE

WEEPHOLE

WEEPHOLE

WEEPHOLE

KTDBSPOCProtective strike plate

1/4”(7mm)

3/16”(4mm)

DS369


9/16"(14.3mm)

7/16"(10.8mm)

10˚ slope

2-1/8" (54mm)

3/8" (9.5mm)

2-3/8 (56.2mm)

1-3/4” (44.5mm)2-9/16” (65mm)

23/32” (18.5mm) center line of top trackto center line of bottom sill channel

Bronze anodized only

Use KTDBOCSeries flush bolt

Use KTDBOESeries flush bolt

DS7145270BLpile weatherseal, black


KT769D E3™ SILL SYSTEM FOR 1-3/4” (44.5MM) DOOR THICKNESSWater Return All Aluminum Sill System, Thermally Broken For Inswing Folding Doors (Only KT70 Top Track can only be used on inswing application)



bronze powder coat finish over aluminum

KTDBOC200NRQ 8" (200mm) concealed 3/4” FB, throwKTDBOE200NRQ 8" (200mm) 1” throw, round endKTDBOE400NRQ 16" (400mm) 1” throw, round endKTDBOE600NRQ 24" (600mm) 1” throw, round endKTDBOE1000NRQ 39" (1000mm) 1” throw, round end

brushed metallic finish over aluminum to match stainless steel

KTDBOC200NRX 8" (200mm) concealed FB, 3/4” throwKTDBOE200NRX 8" (200mm) 1” throw, round endKTDBOE400NRX 16" (400mm) 1” throw, round endKTDBOE600NRX 24" (600mm) 1” throw, round endKTDBOE1000NRX 39" (1000mm) 1” throw, round end

bright gold finish over aluminum

KTDBOC200NRTG 8" (200mm) concealed FB, 3/4” throwKTDBOE200NRTG 8" (200mm) 1” throw, round endKTDBOE400NRTG 16" (400mm) 1” throw, round endKTDBOE600NRTG 24" (600mm) 1” throw, round endKTDBOE1000NRTG 39" (1000mm) 1” throw, round end

FLUSHBOLTS FOR E3 INSWING FOLDING DOORS: DBOE & DBOC SERIESSPECIFICATIONS Minimum door thickness: 1-3/4” (44.5mm)DBOC Throw length: 3/4” (20mm) • DBOE Throw length: 1” (25mm) Finishes: Bronze powder coat on aluminum to match pvd bronze finish on E3 hinges. Brushed metallic on aluminum to match stainless steel finish on E3 hinges. Bright gold (TG) finish on aluminum to match pvd brass finish on E3 hinges.


PLEASE NOTE: Flushbolt housing & slide bar are manufactured from aluminum components

1-5/16” (33.3mm) face of door to center of pin

1" (25mm)

further machining required for inswing flush bolts offset pins

Flushbolt pin drops into bottom channel or into E3 inswing sill channel.

E3 floor channel

3/4" (20mm)

further machining required for larger bottom pin

KTDBOETop flushbolt

EXTERIOR INTERIOR

1-3/4’’ (45mm) min thickness

KTDBOCBottom flushbolt

KT70Top track

4 lengths available:

KTE2DBFORB Router bit for flushbolts

fit striker to pin side of drop bolt (opposite the black plastic cap)

KTDBPCS Replacement end cap for OC flushbolt pin

Replacement strike plate for OC flushbolt KTDBSPOCX Brushed finishKTDBSPOCQ Bronze powder coat

fit centrally to the drop bolt when in the closed position

Bright gold (TG) finish is custom order, call for manufacturing time.

PRODUCT CODE DESCRIPTION

OC flushbolt for bottom of doors

OE flushbolt for top of doors

Strike plate for headerKTDBSPQ bronze powder coat KTDBSPS Satin chrome


Router bit for flushboltsKTE2DBFORB

7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

STRIKER FOR INSWING DOORS


FLUSHBOLTS FOR E3 OUTSWING FOLDING DOORS: DBOT SERIES

SELECT FINISH PRODUCT NUMBER DESCRIPTION

bronze powder coat finish on aluminum

KTDBOT200NRQ 8" (200mm) 1” throw, round endKTDBOT400NRQ 16" (400mm) 1” throw, round endKTDBOT600NRQ 24" (600mm) 1” throw, round endKTDBOT1000NRQ 39" (1000mm) 1” throw, round end

brushed metallic finish on aluminum to match stainless steel

KTDBOT200NRX 8" (200mm) 1” throw, round endKTDBOT400NRX 16" (400mm) 1” throw, round endKTDBOT600NRX 24" (600mm) 1” throw, round endKTDBOT1000NRX 39" (1000mm) 1” throw, round end

bright gold finishon aluminum

KTDBOT200NRTG 8" (200mm) 1” throw, round endKTDBOT400NRTG 16" (400mm) 1” throw, round endKTDBOT600NRTG 24" (600mm) 1” throw, round end

SPECIFICATIONSMax wind load: 450kg (990lb) forceMin door thickness: 1-3/4” (44.5mm)Throw length: 1” (25mm)Finishes: Bronze powder coat on aluminum to match pvd bronze finish on E3 hinges. Brushed metallic on aluminum to match stainless steel finish on E3 hinges. Bright gold (TG) finish on aluminum to match pvd brass finish on E3 hinges.

The flush-mounted flushbolts, rounded style and 1” (25mm) throw are designed for use with sliding and folding doors. This flushbolt will resist high winds and is rated to resist a 250kg load in Western Red Cedar and 450kg in Amoora. The bolts are easily installed with a dedicated router bit and are available in three finishes.


1” (25mm) throw length regardless of bolt length

INTERIOR

Architectural Detail

2-7/16” (62mm)

13/16” (20.6mm)

7/8”(22mm)

KTE2DBFORB Router bit for flushbolts (dedicated router bits are available)


flushbolt machining centered at stile width

R = 1/64” (0.5mm)9/16” (14mm)

CL

1-27/64” (36mm)

1/8”(2.5mm)

3/4”(19mm)

KT749 Flushbolt cup used with floor channel and ADA sill

Flushbolt cup used with floor channel and ADA sillKT749BRONZE bronze powder coatKT749DCH Satin chrome



7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

1-27/64”(36mm)

43/64” (17mm)

35/64” (14mm)

47/64” (18.6mm)

pin diameter 25/64” (10mm)

35/64” (14mm)

1” (25mm)

Flushbolt Assembly

Actual machining for flushbolts (face plate)1-27/64” x 7-7/8” (36mm x 200mm) 1-27/64” x 23-5/8” (36mm x 600mm)1-27/64” x 15-3/4” (36mm x 400mm) 1-27/64” x 39-3/8” (36mm x 1000mm)


SELECT FINISH PRODUCT NUMBER DESCRIPTION

bright gold finishover aluminum

KTDBSY200NRTG 8” (200mm), 1” throw, round endKTDBSY400NRTG 16” (400mm) 1” throw, round endKTDBSY600NRTG 24” (600mm) 1” throw, round end

powder coat finishbronze overaluminum

KTDBSY200NRQ 8” (200mm) 1” throw, round endKTDBSY400NRQ 16” (400mm) 1” throw, round endKTDBSY600NRQ 24” (600mm) 1” throw, round endKTDBSY1000NRQ 39” (1000mm) 1” throw, round end

brushed metallic finish over aluminum to match stainless steel

KTDBSY200NRX 8” (200mm) 1” throw, round endKTDBSY400NRX 16” (400mm) 1” throw, round endKTDBSY600NRX 24” (600mm) 1” throw, round endKTDBSY1000NRX 39” (1000mm) 1” throw, round end

SPECIFICATIONSMax wind load: 450kg (990lb) forceMin door thickness: 1-3/4” (44.5mm)Bolt lengths: 8”, 16”, 24”, 39” (200mm, 400mm, 600mm, 1000mm)Finishes: Bright gold to match pvd brass hardware bronze powder coat on aluminum to match the pvd bronze hardware & brushed metallic to match stainless steel hardware

INTERIOR

Architectural Detail Flushbolt Assembly (Machining Spec)

2-7/16” (62mm)

13/16” (20.6mm)

7/8”(22mm)

flushbolt machining centered at stile width

R = 1/64” (0.5mm)9/16” (14mm)

CL

1-27/64” (36mm)

1/8”(2.5mm)

3/4”(19mm)

KT749 Flushbolt cup used with floor channel and ADA sill


KTE2DBFORB Router bit for flushbolts (dedicated router bits are available)

Flushbolt cup used with floor channel and ADA sillKT749BRONZE bronze powder coatKT749DCH Satin chrome


7-7/8” (200mm)15-3/4” (400mm)23-5/8” (600mm)39-3/8” (1000mm)

1-31/32”(50mm)

1-27/64”(36mm)

17/32”(13mm)

pin diameter9/16 (14mm)

1” (25mm)

The flush-mounted flushbolts, rounded style and 1” (25mm) throw are designed for use with sliding and folding doors. Symphony™ will resist high winds and is rated to resist a 250kg load in Western Red Cedar and 450kg in Amoora. The bolts are easily installed with a dedicated router bit and are available in three finishes.

Symphony™

FLUSHBOLTS FOR OUTSWING FOLDING DOORS: DBSY SERIESUsed with KT788 ADA Sill and KT23 Floor Channel

Bright gold ( TG) finish is custom order, call for manufacturing time.

Actual machining for flushbolts (face plate)1-27/64” x 7-7/8” (36mm x 200mm) 1-27/64” x 23-5/8” (36mm x 600mm)1-27/64” x 15-3/4” (36mm x 400mm) 1-27/64” x 39-3/8” (36mm x 1000mm)


ECLIPSE E3 DRILLING JIG INSTRUCTIONS3.57mm (9/64”) Drilling for 15mm (19/32”) Pivot / Intermediate / LH & RH Carrier Sets

Align the stiles from ajoining doors next to each other on the bench or similar. Push the 15mm (19/32”) buttons at the first end, then align them hard up to the bottom of the buttons while holding the stiles tight up to each other, then drill holes to depth of screw.

Push all buttons up so the jig can slide to the center where a mark should be added to the stiles. Align the ‘V’ in the side of the jig with the mark on the stile, then drill holes to the depth of screw.

Push all buttons up and slide the jig down the opposite end. Push the 15mm (19/32”) buttons at the other end, then align them hard up to the bottom of the buttons while holding the stiles tight to each other, then drill holes to depth of screw.

Drill all holes using a 3.57mm (9/64”) drill for use with the 10 gauge screws supplied in all Centor sets. Alternatively you can drill the 3.57mm (9/64”) holes for use with 8 gauge screws into aluminum.

Carry out the same steps ( 1, 2 & 3 above) the same as 15mm (19/32”) except using the 60mm (2-3/8”) buttons.

1

1

2

2

3

3

KTE3DJ

SPECIAL ORDER ONLY


ECLIPSE TWINPOINT LOCK & SWING HANDLE

NEW E3 SILLS WITH TWO LOCKING OPTIONS

Flushbolt

Specifications

Function

Style

Testing

The LT2 operates easily with a simple handle rotation, driving a 1” (25mm) throw into the head and sill. This makes it one of the most secure bolt locks on the market. An installed Twinpoint system is completely accessible and serviceable.For people with mobility impairments, the Twinpoint offers the security of two flushbolts, but without the access problems associated with flushbolts being too high or low to reach, and hard-to-grip door handles.

LT2 has the sleek and clean styling synonymous with all Eclipse products. Their low profile allows any folding system, such as F3, E2, E3 or E4 to stack neatly, without intrusive door furniture getting in the way. Eclipse Twinpoint locks are fully concealed within the door stile, avoiding long or hard-to-reach dropbolts fixed to the door face, particularly on tall doors. The Eclipse Twinpoint is an unobtrusive, functional and sleek locking solution.

The Centor LT2 has been tested to 100,000 cycles at maximum configuration to ensure smooth working order beyond their 10 year warranty period. The LT2 Twinpoint locking system has also been exposed to dust, mud, sand and corrosive atmospheres to ensure they stand up to real life use. This includes exposure to salt spray for seaside installations.

Twinpoint assembly is used in securing each pair of folding panels in the closed position. Not used on the swing (active) panel.

Minimum door thickness: 1-3/8” (35 mm) / Minimum rod length: 15” (381 mm) / Throw length: 1” (25 mm) / Uses: folding, french & sliding

twinpoint & swing handle



multipoint &lever lock set

4L 3L

For 1-3/4” (44.5mm) or 2-1/4” (57mm) Door Thickness

The new DBOT flushbolt & Twinpoint lock were designed to utilize the same channel in any of our four new E3 sills, thus giving you the option to now offer your customer the original flushbolt design or the simple hand rotation of the single handle, driving a 1” throw into the head and sill.

KT795 Sill

Channel for 1-3/4” (44.5mm) doorChannel for 2-1/4” (57mm) door

snap in covers for channels

NO SCALENO SCALE

Twinpoint

KT775 Sill

DBOT Series Flushbolt

Twinpoint


LT2 TWINPOINT LOCK & DF3 (ALUMINUM) OR DF4 (STAINLESS STEEL) SWING HANDLESKit Components For Twinpoint Assembly

transmission rod

PLEASE NOTE: When ordering complete TwinPoint Assembly, you are required to order: transmission rod & cover plate, lock/gear box, swing handle & cups.

Twinpoint Lock assembly not available in PVD Brass (TG)

transmission rod

swing handle assembly(6 finishes)

lock/gear box

two finishes available on outer housing cover plate

PRODUCT # DESCRIPTION

EC TwinPoint Lock (LT2 Model) for use with DF3 (Aluminum) & DF4 (Stainless Steel) ModelsECLT2TRSN0924X TwinPoint transmission rod, cover plate and strike plate for 96” (2438mm) door height / brushed metallic aluminum finishECLT2TRSN0924Y TwinPoint transmission rod, cover plate and strike plate for 96” (2438mm) door height / black anodized finishECLT2TRSN0930X TwinPoint transmission rod, cover plate and strike plate for 120” (3048mm) door height / brushed metallic aluminum finishECLT2TRSN0930Y TwinPoint transmission rod, cover plate and strike plate for 120” (3048mm) door height / black anodized finishEC Lock Gear Box for EC TwinPoint (LT2 Model)ECLT2NS Lock/gear box for EC TwinPoint transmission rod, cover plate & handleEC Swing Handle DF3 (Aluminum) Model For EC TwinPoint (LT2 Model)ECDF3SHNAL DF3 swing handle aluminum, black powder coatECDF3SHNAPCN DF3 swing handle aluminum, satin aluminum powder coatECDF3SHNAQ DF3 swing handle aluminum, bronze powder coatEC Swing Handle DF4 (Stainless Steel) Model For EC TwinPoint (LT2 Model)ECDF4SHNSOL DF4 swing handle stainless steel, PVD bronze finishECDF4SHNSS DF4 swing handle stainless steel, brushed finishCup for Sill or Head (Mandatory for Sill, Optional for Head)ECLTBC8SS Brushed S.S. FinishECLTBC8SOL PVD Bronze FinishTL2 Router BitECLT2RB Router bit for LT2 TwinPoint Lock AssemblyEclipse E3 Drilling Jig for E3 Hinge placement on doorKTE3DJ Eclipse E3 drilling jig for wood doorsStrike Plate for Head (For replacement purposes only) One strike supplied with Twinpoint (Standard)ECLTSP8SS Brushed S.S. FinishECLTSP8OL PVD Bronze Finish


LT2 TWINPOINT1-1/16”(27mm)

4-23/32”(120mm)

15-3/4”(400mm)

1-3/4”(44.50mm)

4-23/32”(120mm)

1” (25mm)

Standard = 36” (914mm)Minimum = 15” (381mm)

LT2 Model TwinPoint Lock

DF3 Model TwinPoint Swing Handle (Aluminum)orDF4 Model Twinpoint Swing Handle (Stainless Steel)

E3 Top Track

E3 Floor Channel used in conjunction with Twinpoint

New E3 Sill used in conjuction with Twinpoint


Twinpoint & Swing Handle



Multipoint &Lever Lock Set

4L 3L


WOOD STILE ROUTE PROFILE (OUTSWING APPLICATION) FOR LT2 MODEL

60.0°

9/32” (7.1mm)

5/64” (1.8mm)

Detail A

ECLT2RB Route stile

1-3/4” (44.5mm)

1-3/32”(27.80mm)

32/23”(18.4mm)

1/2”(12.7mm)

5/32”(4mm)

3/32”(2.5mm)

9/16”(14.4mm)

2-1/8”(54mm)

14-11/64”(360mm)

9-1/16” (230.2mm)

R 1/2”(12.7mm)

2-5/64” (53mm)

11/16” (18mm)

standard height9/14”

(36mm)

B

A

A

1-7/64” (28mm)

15/32” (12mm)

1-1/32”(26mm)

R7 9/32”(7.2mm)

3-3/16”(81mm)

4-61/64”(126mm)

13/64”(5mm)

Detail A

Back Set

min 1-3/8” (35mm)


1-11/16”(43mm)

R 13/32”(10.5mm)

13/16”(21mm)

11/64” (4.2mm)

21/64” (8.4mm)

1-3/4” (44.5mm)

19/64” (7.6mm)

E2 / E3 HINGE PLACEMENT OVER TWINPOINT

A A

5/32" (4mm)1-3/32" (27.8mm)

9/16"(14.4mm)

1-3/4" (44.5mm)

SECTION A-A

E2 Hinge

E3 hinge

Strike plate for head

Flushbolt metal cup used with floor channel

ECLTSP8SS Brushed s.s. finishECLTSP8OL PVD bronze finish

ECLTBC8SS Brushed s.s. finishECLTBC8SOL PVD bronze finish

2-13/32”(61mm)


DF3 TwinPoint Swing Handle, Choice of 4 Finishes Over Cast Aluminum

LT2 TwinPoint Housing Cover Plate Finishes

LT2 Transmission HousingBrushed Metallic Aluminum or

Black Anodized finish

Swing HandleDF3: Aluminum handle (4 finishes)DF4: Stainless Steel Handle (2 finishes)

Finishes & MaterialsThe Twinpoint door furniture is available in a range of finishes to suit any door or décor.

Brushed Metallic Aluminum Black Anodized Aluminum

Satin Aluminum Powder Coat Black Powder Coat Bronze Powder Coat

DF4 Twinpoint Swing Handle (SS) Choice of 2 Finishes

PVD bronze over stainless steel

Brushed stainless steel

PLEASE NOTE: For technical reasons associated with color reproduction, the colors shown on this brochure give only an indication of color & finish. No warranty or guarantee can be given that they will exactly match the product as supplied.





multipoint &lever lock set

4L

3L

Twinpoint Lock assembly not available in PVD Brass (TG)

LT2 Model Twinpoint

© Copyright 2018 • Eclipse Architectural®FULL SCALE EXCEPT AS NOTED30 FULL SCALE EXCEPT AS NOTED

JAMB TO SILL ASSEMBLY

KT23 OPTIONAL FLOOR CHANNEL APPLICATION FOR OUTSWING OR INSWING DOORSThis application is recommended for interior application, exterior non-rainfall weather conditions or undercover well protected doors. 2-1/4” (57mm) door, outswing application shown. Other door thickness may be used.

screws

jamb

fir top moulding

inserts snap into channel

E3 sill extruded aluminum clear or bronze anodized, with wood substrate and interior top moulding (fir)

DS434 kerf seal

DS434kerf seal

KT768GASKET sill to jamb assembly gasket

KT23BLVEPVC insert, black

KT795COVERBLVEPVC insert, black

KT23DV Floor channel, bronze anodized with PVC insert, blackKT23BLVE PVC insert only, black (replacement part)Lengths available: 111”, 147”, 183”, 222”, 294” (2.81m, 3.73m, 4.64m, 5.63m, 7.46m)

EXTERIOR INTERIOREXTERIOR INTERIOR

DS369A7145BLdual door

bottom pile seals

15/16”(24mm)

KT23CVor KT23DVfloor channel with PVC insert

min door thickness when usingfloor channel is 1-3/8” (35mm)

2-1/4” (57mm)

KT749Flush bolt cup

KT749Flush bolt cup

7/8"(22mm)

7/8"(22mm)

15/16”(24mm)

13/32”(10mm)

13/32”(10mm)

3/16”(4.6mm)

7/8”(22mm)

7/16”(11mm)

1-3/4” (44.5mm)

finished floor line

finished floor line

1/2”(12.7mm)

7/8”(22mm)

7/16”(11mm)

Door height plus 3-3/4” (95.3mm) = R.O. (from finished floor line)door height plus 3-1/4” (82.55mm) = full jamb height

NO SCALE


1-5/16” (33.34mm)KT190Castragalsupplied by Eclipse Architectural

2134mm (84”)2438mm (96”)2743mm (108”)3048mm (120”)clear fir astragal 1-1/8”

(28.5mm)

DSP10835BLKerf inserted fin pile

9/32”(7.14mm)

9/32”(7.14mm)

1/8” (3.23mm)

1-3/4”(44.5mm)

door

kerf slot1/8” x 3/8”(3.18mm x 9.5mm)

DS434inserted weatherseal, brown, white or black

3/8” (9.5mm)

5/16” (7.94mm)

INTERIOR3º bevel on active door ie: 35-7/8” (911mm) inside measurementwidth of door.

36” (914.4mm) outsidemeasurement of door

5/32” (4mm)

INTERIOR

DSP10835BLKerf inserted fin pile

door with astragal

NOSCALE

1/8” (3.23mm)

KT190C WOOD ASTRAGAL DETAIL FOR ECLIPSE E3 INTERIOR FOLDING SYSTEMTriple Seal For Superior Sealing Performance

LATCHING DOOR HOLD (DH)

KT740DHC Clear anodizedKT740DHD Bronze anodized

T-Unit

set screenadjustment screw

main unit

NOTE: For ease of mounting all hardware, it is recommended to use square edge doors.

NO SCALE

NO SCALE


E3 HARDWARE PLACEMENT (4L) Outswing Application

C3 DOOR HOLD MAGNETS(OPTIONAL)

INTERIOR APPLICATIONS: HOW TO DETERMINE SWING OF SYSTEMSThe following is a guideline when determining outswing or inswing applications for the purpose of choosing correct hardware and flushbolts. NOTE: The interior/exterior designation (i.e. 3L) is still used for interior application because it just makes it easier to understand.

FOR EXAMPLE:

Hall Or Living RoomThe above example (3LI) shows the system swinging into the bedroom and flushbolts on the same side. This would be an inswing system and the bedroom side is considered the interior side. Passage set only recommended for the swing door.

Another RoomThe above example (3L) shows the system swinging into another room and flushbolts on the bedroom side. This would be an outswing system and the bedroom side is considered the interior side. Passage set only recommended for the swing door.

The above example (2L2R) is not recommended for interior applications because of the potential of getting locked in a room without any exit. Other configurations not recommended. 2L, 2R, 4L, 4R, 6L, 6R, 8L, 8R; basically pairs or even number or door panels.

INSWING

INTERIOR

EXTERIOR3LI

INTERIOR

EXTERIOR

OUTSWING3L

EXTERIOR

Notaccessible

2L2R

(FLUSHBOLT) BEDROOM SIDE (FLUSHBOLT) BEDROOM SIDEINTERIOR

top pivot

bottom pivot

wall pivot

hingeconcealed intermediate guide

hinge with handle

concealed end guide

weatherseals

intermediate carrier

end carrier

KTE3TPPLATEmounting plate for E3 top pivot assembly

KTDCAS Satin aluminum finishKTDCAOL Black finish KTDCATG Brass finish (custom order, call for manufacturing time)


FLUSHBOLT PLACEMENT

up to 84”(2134mm)

84-1/16”to 96”(2159mmto 2438mm)

96-1/2” to 108” (2403mmto 2743mm)

108-1/16”to 118”(2768mm to2997mm)

8” (200mm)flushbolt








Suggested flushbolt lengths for door heights 80” to 118” (2032mm to 2997mm)

NOTE: End user may require longer flushbolts for top of doors for easier reach. When using E2 hardware for folding windows, top flushbolt length must be specified.

Scale: 1/4” = 1ft.

WIDTH1) Jamb to Stud - typical 1/4” (6mm) shimming x 2 = .5” (12mm)2) Jamb thickness 11/16” (17.5mm) x 2 = 1.375” (34.9mm)3) Panel to Jamb - Clearance 9/32” (7mm) x 2 = .5624” (14mm)4) Panel to Panel - Gap 5/32” (4mm) x 3 = .4686” (12mm)5) Panel width 36” (914”) x 4 = 144” (3656mm

HEIGHT6) Frame header to R.O. header. Typical 1/2” (12mm) shimming x 1 = .5” (12mm)7) Frame header 2-21/32” (68mm) x 1 = 2.677” (68mm)8) Top of door panel to frame header 3/16” (5mm) x 1 = .1875” (5mm)9) Door panel height 84” (2134mm) x 1 = 84” (2134mm)10) Bottom of door panel to top of sill 13/32” (10mm) x 1 = .3937” (10mm)11) Sill height 1-3/16” (30.16mm) x 1 = 1.1875 (30.16mm)

Clearances Rough opening specs for E3

Pivot door to jamb 9/32” (7mm)Swing door to jamb 9/32” (7mm)Panel to panel gap 5/32” (4mm)Bottom of door panel to sill 3/8” (9.5mm)Top of door panel to header 3/16” (5mm)Inside face of door panel to stop 3/8” (9.5 mm)

1. Door Height plus 5” (127mm) = R.O. when using inswing or outswing E3 Sills and Frame specs.

2. Door Height plus 4-1/4” (107.9mm) = R.O. when using KT788E3 ADA Sill. 3. Door Height plus 3-3/4” (95.25mm) = R.O. when using E3 floor channel.

Manual calculation for determining R.O. (i.e. configuration 1L3 R, i.e. door panel size 36” x 84” [914mm x 2134mm])

R.O. (width) 146-29/32” or 146.906” or (3731mm) or (3.73m)

R.O. Height 88 15/16” or 88.95” or (2259 mm) or (2.25m)

For O.S.M. width of unit take R.O. minus 1/2” (12mm) i.e. 146-29/32” (3731mm) - 1/2” (12mm) = 146-13/32” (3718mm).

For O.S.M. height of unit take R.O. minus 1/2” (12mm). i.e. 88-15/16” (2259mm) minus 1/2” (12mm) = 88-7/16” (2246mm).

MANUAL DOOR CALC

MAGNETSKTEMAG Magnets for holdingthe door panels in the open position

KTEMAG(sold as pairs)

13/16”(20.6mm)2-3/8”

(60.3mm)

I.E. 5L

door hold

magnets

3L

R.O.

INTERIOR

EXTERIOR

1 1

22

35

4 4 45 5 5

3

R.O. INT.EXT.

1110

9

87

6


E3 PARTS SELECTIONWhen ordering, add color designation (letters) to end of product number: OL: pvd bronze | S: stainless steel | TG: pvd brass

KTE3CPS Pivot sets2 pieces

KTE3EH Interior D pull handlefor inswing doors1 piece

Intermediate carrier sets with additional hinge

KTE3CLCS Left carrier sets2 pieces

KTE3HNHS Hinge sets (FLAT) without middle handle for inswing doors3 pieces

Hinge sets no handle for inswing doors

KTE3CRCS Right carrier sets2 pieces

KTE3HHS Half OFFSET hinge sets with middle handle for outswing doors3 pieces

Half offset hinge sets with handle for outswing doors

KTE3CICS Intermediate carrier sets, 3 pieces

KTE3HHNHS Half offset hinge sets without middle handle for inswing doors 3 pieces

Half offset hinge sets no handle for inswing doors

KTE3WPS Wall pivot set, jamb mounted middle pivot for doors over 88” (2235mm)1 piece

KTE3HS Hinge sets (FLAT) with middle handle for outswing doors3 pieces

Hinge sets with handle for outswing doors

KTE3CBPIVOTH bottom pivot housing only (replacement part)

concealed bottom guide




KTE3HNHSingle hinge, order separately


KTE3HHNHSingle hinge, order separately


KTE3HHNHSingle hinge, order separately

mounted betweentop & bottompivot



Number of Hinges for Panel Heights of 80” to 118” (2032mm to 2997mm)

Intermediatecarrier sets

Hinge set or half offset hinge set

Pivot set top & bottom

Up to 96” (2438mm)door height use1, 3, 5

Up to 96” (2438mm)door height use1, 3, 5

Up to 87-15/16” (2234mm)door height use 1 & 5

108-1/16 ” to 118” (2745 to 2997mm)door height use 1, 2, 3, 4, 5

#1 #1

#2 #2

#3 #3

#4 #4

#5 #5

#1

#2

#3

#4

#5

96-1/16” to 108”(2440 to 2743mm)use 1, 2, 3, 5

96-1/16” to 108”(2440 to 2743mm)use 1, 2, 3, 5

88” to 96” (2235 to 2438mm)door height use 1, 3, 5

108-1/16 ” to 118”(2745 to 2997mm)use 1, 2, 3, 4, 5

108-1/16 ” to 118”(2745 to 2997mm)use 1, 2, 3, 4, 5

96-1/16” to 108” (2440 to 2743mm)door height use 1, 2, 3, 5

Pivot Set

Wall Pivot Set Use with above pivot set on doors over 8ft (2438mm) in height

Half Offset Hinge SetMiddle hinge with handle for outswing doors

Hinge Set (Flat)Middle hinge with handle for outswing doors

Intermediate Carrier Set

Right Carrier Set

Left Carrier Set

Single Hinge Half OffsetNo handle for inswing doors. Use as 4th & 5th hinge for doors over 8ft (2438mm) in height.

Single Hinge (Flat) No handle for inswing doors. Use as 4th & 5th hinge for doors over 8ft (2438mm) in height.

Half Offset Hinge SetNo middle handle for inswing doors

Hinge Set (Flat)No middle handle for inswing doors

Single Hinge Half OffsetWith handle for outswing doors. Use as 4th & 5th hinge for doors over 8ft (2438mm) in height

Single Hinge (Flat)With handle for outswing doors. Use as 4th & 5th hinge for doors over 8ft (2438mm) in height

2 pieces

1 piece

3 pieces

3 pieces

3 pieces

2 pieces

2 pieces

1 piece

1 piece

3 pieces

3 pieces

1 piece

1 piece

KTE3CPSTG PVD brass KTE3CPSOL PVD bronzeKTE3CPSS stainless steel

KTE3SCREWTG PVD brass KTE3SCREWOL PVD bronzeKTSCREWSS stainless steel

KTE3WPSTG PVD brass KTE3WPSOL PVD bronzeKTE3WPSS stainless steel

KTE3HHSTG PVD brass KTE3HHSOL PVD bronzeKTE3HHSS stainless steel

KTE3HSTG PVD brass KTE3HSOL PVD bronzeKTE3HSS stainless steel

KTE3CICSTG PVD brass KTE3CICSOL PVD bronzeKTE3CICSS stainless steel

KTE3CRCSTG PVD brass KTE3CRCSOL PVD bronzeKTE3CRCSS stainless steel

KTE3CLCSTG PVD brass KTE3CLCSOL PVD bronzeKTE3CLCSS stainless steel

KTE3HHNHTG PVD brass KTE3HHNHOL PVD bronzeKTE3HHNHS stainless steel

KTE3HNHTG PVD brass KTE3HNHOL PVD bronzeKTE3HNHS stainless steel

KTE3HHNHSTG PVD brass KTE3HHNHSOL PVD bronzeKTE3HHNHSS stainless steel

KTE3HNHSTG PVD brass KTE3HNHSOL PVD bronzeKTE3HNHSS stainless steel

KTE3HHTG PVD brass KTE3HHOL PVD bronzeKTE3HHS stainless steel

KTE3HTG PVD brass KTE3HOL PVD bronzeKTE3HS stainless steel

E3 PARTS SELECTION

Replacement Screws for all hinges


Head Office & Manufacturing Centre, Vancouver, Canada7470 Buller Avenue, Burnaby, B.C. V5J 4S5 CanadaPhone: (604) 451-1080 • Fax: (604) 451-1140 • [email protected] Vancouver, B.C., please use our toll free numbers: Phone: 1-888-520-9009 Fax: 1-800-567-2887

Branch Office & Distribution Centre, Toronto, CanadaPhone head office toll free 1-888-520-9009 for branch address

Branch Office & Distribution Centre, Los Angeles, CaliforniaPhone head office toll free 1-888-520-9009 for branch address

Eclipse Architectural® Corporate ShowroomsVancouver & Toronto, Canada • Los Angeles, California, USA

Exterior Folding Door Systems

Documents

Hardware, Track, Sill System & Weathersealing for … · Eclipse E3 is specified with 5 separate groups: track, sill, weathersealing, flushbolts and hardware. Components are required