Harris Platinum Frame and System Edition

7/29/2019 Harris Platinum Frame and System Edition

1/453

Wideband Digital Multirate Routing SwitchersFrames and Modules

Installation, Configuration, and Operation Manual

Edition T

PT-FR MAN


2/453


3/453

PlatinumWideband Digital MultirateRouting Switchers Frames andModules

Installation, Configuration, andOperation Manual

Edition T

November 2011


4/453

Harris CorporationBroadcast CommunicationsDivision4393 Digital WayMason, OH USA 45040

Copyright 2006-2011 Harris Corporation, 1025 West NASA Boulevard, Melbourne, Florida32919-0001 U.S.A. All rights reserved. This publication supersedes all previous releases. No part of thisdocumentation may be reproduced in any form or by any means or used to make any derivative workwithout permission from Harris Corporation.

Harris Corporation reserves the right to revise this documentation and to make changes in content from

time to time without obligation on the part of Harris Corporation to provide notification of suchrevision or change.

UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then thisdocumentation and the software described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at privateexpense. Software is delivered as Commercial Computer Software as defined in DFARS252.227-7014 (June 1995) or as a commercial item as defined in FAR 2.101(a) and as such isprovided with only such rights as are provided by Harris standard commercial license for the Software.Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR52.227-14 (June 1987), whichever is applicable. You agree not to remove or deface any portion of anylegend provided on any licensed program or documentation contained in, or delivered to you inconjunction with, this User Guide.

This publication, or any part thereof, may not be reproduced in any form, by any method, for anypurpose, without the written consent of Harris Corporation.

Contact Harris Corporation for permission to use materials as well as guidelines concerning foreignlanguage translation and publication.

Harris Corporation reserves the right to revise and improve its products as it chooses. This publication isdesigned to assist in the use of the product, as it exists on the date of publication of this manual, andmay not reflect the product at the current time or an unknown time in the future. This publication doesnot in any way warrant description accuracy or guarantee the use for the product to which it refers.

The Harris logo and assured communications are registered trademarks of Harris Corporation. D-Seriesis a trademark of Harris Corporation. All other trademarks are held by their respective owners.

This user guide was created for Platinum Routing Switchers, Edition T.

Windows is a registered trademark of Microsoft Corporation. AMD and Operton are trademarks ofAdvanced Micro Devices, Inc. Dolby Digital is a registered trademark of Dolby Laboratories.

All other trademarks are the property of their respective holders.

Publication Date: November 2011


5/453

iii

Copyright 2006-2011, Harris Corporation

Contents

About This Manual ................................................................................................xvAudience ...................................................................................................................xv

Revision History .........................................................................................................xv

Writing Conventions ............................................................................................... xvii

Obtaining Documents .............................................................................................xvii

Applications ............................................................................................................... xviii

Unpacking/Shipping Information ...............................................................................xix

Unpacking a Platinum Product .................................................................................xix

Returning a Platinum Product ...................................................................................xix

Standards ......................................................................................................................xx

Platinum Product Standards ......................................................................................xx

EMC Compliance Standards .....................................................................................xxi

Restriction on Hazardous Substances (RoHS) Compliance .........................................xxi

Waste from Electrical and Electronic Equipment (WEEE) Compliance .......................xxii

Safety Standards .................................................................................................... xxiii

Safety Information ..................................................................................................... xxiii

Safety Terms and Symbols in this Manual ............................................................... xxiv

Chapter 1 Introduction ..............................................................................................................1Product Description .......................................................................................................1

Main Features ................................................................................................................2

Frame Architecture ........................................................................................................3

Frame Matrix Functional Arrangement .....................................................................10

Frame-Specific Components .....................................................................................10

Module-Specific Components ..................................................................................11

Front Panel LED Indicators ...........................................................................................15Control Features ..........................................................................................................17

Physical.....................................................................................................................17

Parametric ................................................................................................................17

Signal .......................................................................................................................17

CCS Control System Integration Requirements .........................................................18

Real-time Requirements ...........................................................................................18


6/453

Contentsiv


Applications Integration ...........................................................................................18

Frame Specifications.....................................................................................................21

Chapter 2 Frame Modules .......................................................................................................23

PM-MI-5/PM-MI-9/PT-MI-15/PT-MI-28 Module Interconnect ....................................23Operation ................................................................................................................23

Installation ...............................................................................................................24

Configuration ..........................................................................................................24

PM5-CBP/PT-CBP: Communications Back Panel Module ...........................................24

Operation ................................................................................................................24

Installation ...............................................................................................................27

Configuration ..........................................................................................................27

PT-RES: Platinum Resource Module ............................................................................27

Operation ................................................................................................................27

Installation ...............................................................................................................28

Configuration ..........................................................................................................28PM-ALARM-5: Alarm Module for 5RU Frames ...........................................................29

Operation ................................................................................................................29

Pinout Diagram ........................................................................................................31

Installation ...............................................................................................................32

Configuration ..........................................................................................................32

Controllable Parameters ...........................................................................................32

PT-ALARM: Alarm Module for 9RU, 15RU, and 28RU Frames ..................................34

Operation ................................................................................................................34

Pinout Diagram ........................................................................................................36

Installation ...............................................................................................................36

Configuration ..........................................................................................................36Controllable Parameters ...........................................................................................36

PT-PS: AC Power Supply ModulePT-PS-DC: DC Power Supply Module

Operation ................................................................................................................38

Installation ...............................................................................................................39

Configuration ..........................................................................................................39

Specifications ...........................................................................................................39

PM5-PD/PT-PD: Power Distribution Module ..............................................................41

Operation ................................................................................................................41

Installation ...............................................................................................................42

Configuration ..........................................................................................................42PT-EXPS: External Power Supply Frame .....................................................................43

Operation ................................................................................................................43

Installation ...............................................................................................................43

Configuration ..........................................................................................................44

Connecting External Power Supplies ........................................................................44

PM-FAN-5: 5RU Frame Fan Modules ...........................................................................46


7/453

Platinum Frames and ModulesInstallation, Configuration, and Operation Manual

v


Operation ................................................................................................................46

Installation ...............................................................................................................47

Configuration ..........................................................................................................47

PM-FAN-8/PT-FAN-14/PT-FAN-16: 9RU, 15RU, and 28RU Frame Fan Modules ........48

Operation ................................................................................................................48

Installation ...............................................................................................................48

Configuration ..........................................................................................................48

PT-SYNC: Sync Module ................................................................................................49

Operation ................................................................................................................49

Installation ...............................................................................................................51

Configuration ..........................................................................................................51


Functional Block Diagram .........................................................................................52

Specifications ...........................................................................................................52

PT-SYNC-MI: Sync Module Interconnect Module ......................................................53

Operation ................................................................................................................53

Installation ...............................................................................................................53

Configuration ..........................................................................................................53

Chapter 3 Input Modules ........................................................................................................55Input Module General Description .............................................................................56

Control Requirements ..............................................................................................57

Applications Integration ...........................................................................................57

Controllable Parameters List .....................................................................................58

Submodules .............................................................................................................58

PM-HS-IB+/PT-HS-IB+: Digital Multirate Input Modules ...........................................59

Operation ................................................................................................................59Installation ...............................................................................................................60

Configuration ..........................................................................................................60



Specifications ...........................................................................................................63

PM-HS-IB/PT-HS-IB: Digital Multirate Input Modules ...............................................63

Operation ................................................................................................................63

Installation ...............................................................................................................64

Configuration ..........................................................................................................65


Functional Block Diagram .........................................................................................66Specifications ...........................................................................................................66

PM-S-IB+/PT-S-IB+: Digital Multirate Input Modules ................................................67

Operation ................................................................................................................67

Installation ...............................................................................................................68

Configuration ..........................................................................................................68



8/453

Contentsvi



Specifications ...........................................................................................................71

PM-S-IB/PT-S-IB: Digital Multirate Input Modules .....................................................71

Operation ................................................................................................................71

Installation ...............................................................................................................72

Configuration ..........................................................................................................72



Specifications ...........................................................................................................74

PM-AEB-IB/PT-AEB-IB: AES Balanced Input ModulesPM-AEC-IB/PT-AEC-IB: AES Coaxial Input Modules

Operation ................................................................................................................75

Installation ...............................................................................................................76

Configuration ..........................................................................................................77



Pinout Diagram ........................................................................................................79

Specifications ...........................................................................................................80

PM-AEBT-IB/PT-AEBT-IB: AES Balanced Input Modules with TDM CapabilityPM-AECT-IB/PT-AECT-IB: AES Coaxial Input Modules with TDM Capability

Operation ................................................................................................................82

Installation ...............................................................................................................83

Configuration ..........................................................................................................84



Pinout Diagram ........................................................................................................86

Specifications ...........................................................................................................87

PM-DEC-IB/PT-DEC-IB: Analog Video to SDI Decoder Input Modules ......................90

Operation ................................................................................................................90Installation ...............................................................................................................92

Configuration ..........................................................................................................92



Specifications ...........................................................................................................95

PM-ADC-IB/PT-ADC-IB: Audio A/D Input Modules ....................................................96

Operation ................................................................................................................96

Installation ...............................................................................................................99

Configuration ..........................................................................................................99


Functional Block Diagram .......................................................................................102

Pinout Diagram ......................................................................................................103

Specifications .........................................................................................................103

PM-ADCT-IB/PT-ADCT-IB: Audio A/D Input Modules with TDM Capability ..........106

Operation ..............................................................................................................106

Installation .............................................................................................................109

Configuration ........................................................................................................109


9/453


vii


Controllable Parameters .........................................................................................109


Pinout Diagram ......................................................................................................114

Specifications .........................................................................................................114

PT-HS1310S-IB: Fiber Optical HD/SD Serial Video Receiver Modules ....................116

Operation ..............................................................................................................116

Installation .............................................................................................................117

Configuration ........................................................................................................117



Specifications .........................................................................................................119

PT-HSO-IB+: Fiber Optical 3G HD-SDI, 1.5G HD-SDI, andSD-SDI Serial Video Receiver Modules .....................................................................120

Operation ..............................................................................................................120

Installation .............................................................................................................121

Configuration ........................................................................................................122


SFP Specifications ...................................................................................................123


Specifications .........................................................................................................126

PT-DMX-3G: SDI Audio De-Embedder Submodule with 3 Gb/s CapabilityPT-DMX: SDI Audio De-Embedder Submodule with1.5 HD-SDI and SD-SDI Capability

Operation ..............................................................................................................127

Installation .............................................................................................................129

Configuration ........................................................................................................129



Specifications .........................................................................................................134PT-FSDMX-IBG and PT-FSDMXO-IBG Frame Synchronizer and Demultiplexing InputModules .....................................................................................................................135

Power-Up sequence ................................................................................................136

Firmware Upgrade and Backup Image.....................................................................137

Activating PT-FSDMX Functions...............................................................................137



LED Indicators .........................................................................................................152

Specifications .........................................................................................................153

PT-HSR8C1D-IBG and PT-HSR1D-IBG Digital Multirate Matrix Expansion Input and

Receiver Modules ......................................................................................................155Operation ..............................................................................................................155

PT-HSR8C1D-IBG Input Module .............................................................................155

PT-HSR1D-IBG Input Module ..................................................................................156

Input Expansion .....................................................................................................156

Installation .............................................................................................................157

Configuration ........................................................................................................157


10/453

Contentsviii




Specifications .........................................................................................................162

LED Indicators ........................................................................................................162

PT-MADI4C-IBG - Platinum Multichannel Audio Digital Interface (MADI) Input Mod-ule ...............................................................................................................................163

MADI Input Module (PT-MADI4C-IBG) ...................................................................164Controlling the MADI Input Module through Navigator ..........................................165

MADI Presence ......................................................................................................167

TDM Mapping .......................................................................................................167

Sample MADI to TDM Mapping Scenarios ..............................................................168

Specifications .........................................................................................................172

Power Consumption ..............................................................................................172

PT-MADI4C-IBG Parameters ...................................................................................172

Chapter 4 Output Modules ...................................................................................................175Output Module General Description ........................................................................177

Controllable Parameters Lists .................................................................................178

Submodules............................................................................................................179

Signal Flow Diagram ..............................................................................................180

PM-HSR-OBG+/PT-HSR-OBG+: HD-SDI/SD-SDI with Reclocking Output Modules 181

Operation ..............................................................................................................181

Installation .............................................................................................................183

Configuration ........................................................................................................183



Specifications .........................................................................................................185PM-HSR-OB+/PT-HSR-OB+: HD-SDI/SD-SDI with Reclocking Output Modules .....186

Operation ..............................................................................................................186

Installation .............................................................................................................188

Configuration ........................................................................................................188



Specifications .........................................................................................................190

PT-HSRO-OB+: Fiber Optical 3G HD-SDI, 1.5G HD-SDI, and SD-SDI Serial VideoTransmitter Module

PT-HSRO-OBG+/PT-HSR8O-OBG+: Fiber Optical 3G/1.5G HD-SDI, and SD-SDI Serial

Video Transmitter Module With Power Saving ......................................................192Operation ..............................................................................................................192

Installation ..............................................................................................................194

Configuration ........................................................................................................194


SFP Specifications ...................................................................................................196



11/453


ix


Specifications .........................................................................................................199

PM-HSR-OB/PT-HSR-OB: HD-SDI/SD-SDI with Reclocking Output Modules

PM-HSR-DOB/PT-HS-DOB: HD-SDI/SD-SDI with Reclocking andDual Output Modules ................................................................................................200

Operation ..............................................................................................................200

Installation .............................................................................................................202

Configuration ........................................................................................................203Controllable Parameters .........................................................................................203


Specifications..........................................................................................................205

PM-SR-OBG+/PT-SR-OBG+: SD-SDI with Reclocking Output Modules ...................206

Operation ..............................................................................................................206

Installation .............................................................................................................207

Configuration ........................................................................................................207



Specifications .........................................................................................................209

PM-SR-OB+/PT-SR-OB+: SD-SDI with Reclocking Output Modules ........................210

Operation ..............................................................................................................210

Installation .............................................................................................................211

Configuration ........................................................................................................211



Specifications .........................................................................................................213

PM-SR-OB/PT-SR-OB: SD-SDI with Reclocking Output Modules

PM-SR-DOB/PT-SR-DOB: SD-SDI with Reclocking and Dual Output Modules .......215

Operation ..............................................................................................................215

Installation .............................................................................................................216

Configuration ........................................................................................................216



Specifications .........................................................................................................218

PM-AEB-OB/PT-AEB-OB: AES Balanced Output Modules

PM-AEC-OB/PT-AEC-OB: AES Coaxial Output Modules ..........................................220

Operation ..............................................................................................................220

Installation .............................................................................................................221

Configuration ........................................................................................................222



Pinout Diagram ......................................................................................................223

Specifications .........................................................................................................224

PM-AEBT-OB/PT-AEBT-OB: AES Balanced Output Modules with TDM Capability

PM-AECT-OB/PT-AECT-OB: AES Coaxial Output Modules with TDM Capability ..226

Operation ...............................................................................................................226

Installation .............................................................................................................227

Configuration ........................................................................................................228


12/453

Contentsx




Pinout Diagram ......................................................................................................231

Specifications .........................................................................................................232

PM-ENC-OB/PT-ENC-OB: SD to Analog Video Encoder Modules

PM-ENC-DOB/PT-ENC-DOB: SD to Analog Video Encoder Moduleswith Dual Output ......................................................................................................233

Operation ..............................................................................................................233

Installation .............................................................................................................235

Configuration ........................................................................................................235



Specifications .........................................................................................................238

PM-DAC-OB/PT-DAC-OB: AES to Analog Audio Converter Output Modules ........239

Operation ..............................................................................................................239

Installation .............................................................................................................240

Configuration ........................................................................................................241


Pinout Diagram ......................................................................................................243

Specifications .........................................................................................................244

PM-DACT-OB/PT-DACT-OB: AES to Analog Audio ConverterOutput Modules with TDM Capability .....................................................................246

Operation ..............................................................................................................246

Installation ..............................................................................................................247

Configuration ........................................................................................................247



Pinout Diagram ......................................................................................................251

Specifications .........................................................................................................252PT-HSR1310S-OB: Fiber Optical HD/SD Serial Video Transmitter Module ............254

Operation ..............................................................................................................254

Installation .............................................................................................................255

Configuration ........................................................................................................255



Specifications .........................................................................................................257

PT-MUX-3G: SDI Audio Embedder Submodule with 3 Gb/s Capability

PT-MUX: SDI Audio Embedder Submodule with 1.5 HD-SDIand SD-SDI Capability ...............................................................................................259

Operation ..............................................................................................................259Installation .............................................................................................................261

Configuration ........................................................................................................261



Specifications .........................................................................................................266

PT-MADI4C-OBG - Platinum Multichannel Audio Digital Interface (MADI) Output


13/453


xi


Module .......................................................................................................................267

MADI Output Module (PT-MADI4C-OBG) ...............................................................268

Controlling the MADI Output Module through Navigator .......................................268

Reference Locking ..................................................................................................270

TDM Input .............................................................................................................271

TDM Output Mapping ...........................................................................................271

Specifications .........................................................................................................272

Power Consumption ..............................................................................................272

PT-MADI4C-OBG Parameters .................................................................................273

Chapter 5 Crosspoint Modules ...........................................................................................277Crosspoint Module General Description ..................................................................278

Controllable Parameters Lists .................................................................................279


PM-4032-3G5: 40x32 3G HD-SDI Crosspoint Modules ..........................................282

Operation ...............................................................................................................282Installation ..............................................................................................................282

Configuration .........................................................................................................282



Specifications..........................................................................................................283

PM-64x64-X9/PM-6464-3G9: 64x64 Crosspoint Modules .....................................284

Operation ...............................................................................................................284

Installation ..............................................................................................................284

Configuration .........................................................................................................285


Functional Block Diagram .......................................................................................285Specifications..........................................................................................................285

PM-7264-3G5: 72x64 3G HD-SDI Crosspoint Modules ..........................................286

Operation ...............................................................................................................286

Installation ..............................................................................................................286

Configuration .........................................................................................................286



Specifications..........................................................................................................287

PM-128x128-X9/PM-128128-3G9: 128x128 Crosspoint Module ...........................288

Operation ...............................................................................................................288

Installation ..............................................................................................................288Configuration .........................................................................................................289



Specifications..........................................................................................................289

PT-128x256-X15/PT-128256-3G15/PT-128x256-X28/PT-128256-3G28: 128x256Crosspoint Module ....................................................................................................290


14/453

Contentsxii


Operation ...............................................................................................................290

Installation ..............................................................................................................291

Configuration .........................................................................................................291



Specifications..........................................................................................................291

PM-ATDM9-X5/PM-ATDM16-X9/PT-ATDM16-X15/PT-ATDM32-X15/PT-ATDM32-X28/PT-ATDM64-X28: Advanced TDM Crosspoint Modules ..............292

Operation ...............................................................................................................292

Installation ..............................................................................................................295

Configuration .........................................................................................................295



Specifications..........................................................................................................296

Chapter 6 Output Monitoring Modules ..........................................................................297Output Monitoring Module General Description ...................................................298

Controllable Parameters List ...................................................................................302


PT-HSR-OM: HD/SD Output Monitoring Module ....................................................303

Operation ...............................................................................................................303

Installation ..............................................................................................................304

Configuration .........................................................................................................304



Specifications..........................................................................................................305

PT-HSRAEC-OM: 3G-SDI/HD-SDI/SD-SDI Serial VideoOutput Monitoring Module ......................................................................................307

Operation ...............................................................................................................307

Installation ..............................................................................................................309

Configuration .........................................................................................................309



Specifications..........................................................................................................312

Chapter 7 Installation ..........................................................................................................313Before You Begin ......................................................................................................314

Special Pre-Installation Information for Upgrading 3 Gb Input, Output, andCrosspoint Module Firmware ...................................................................................315

Installing Input and Output Modules ......................................................................319

Installing Crosspoint Modules ..................................................................................321

Module Placement .................................................................................................321

Installing Modules ..................................................................................................322


15/453


xiii


Specialized Installation and Removal Procedures for PT-HS1310S-IB,PT-HSRO-OBG+, and PT-HSR1310S-OB Fiber Optical Modules ...............................323

Installing Modules ..................................................................................................323

Removing Modules ................................................................................................324

Inspecting and Cleaning Fiber Optic Connections ...................................................325

Installing Output Monitoring Modules ....................................................................328

Installing Sync Modules .............................................................................................328Installing Alarm Modules...........................................................................................329

Installing Back Panel Modules ..................................................................................330

Installing Resource Modules .....................................................................................331

Replacing Resource Module Firmware......................................................................331

Use Cases ...............................................................................................................331

Installing Power Supplies ..........................................................................................335

Replacing Fans ...........................................................................................................337

Configuration .........................................................................................................340

Installing a Platinum Frame .......................................................................................340

Common Issues and Things to Check .....................................................................340

Commonly Performed Procedures ..........................................................................341

Field Upgrading and/or Replacing Platinum Components .....................................342

Chapter 8 Configuration........................................................................................................343Card-Edge Controls ....................................................................................................344

Using the Card-Edge Controls ................................................................................344

Read-Only and Adjustable Parameters ....................................................................344

Card-Edge Screen Saver .........................................................................................345

Controllable Parameters List Appearance ...............................................................345

Navigating the Parameters List ...............................................................................345Frame Controllable Parameters ................................................................................346

Default Settings .....................................................................................................346

Application Parameters ..........................................................................................347

Fail-Safe Parameters ...............................................................................................347

Configuring via Navigator or RouterMapper ..........................................................350

Adding Platinum Frames by Polling ........................................................................351

Adding Platinum Frames by Discovering .................................................................351

Adding Platinum Frames using the Create or Add Command .................................351

Frame Application Parameters Available Through Navigator or RouterMapper ........351

Configuring Sync Reference Switch Points ..............................................................356

Sync Reference Switch Modes ................................................................................356Configuring TDM Audio Matrices .............................................................................363

Routing Configuration (Analog Stereo/AES/Multiplex) ..........................................363

Adding a TDM Matrix to the Database ...................................................................363

Configuring Outputs for Audio Partitions ...............................................................368

Editing the Logical Database ..................................................................................374


16/453

Contentsxiv


Chapter 9 Terminal Operation............................................................................................383Establishing Terminal Operations Session................................................................383

Establishing Terminal Operation Sessions for Serial Control Interface Products .384

Establishing Telnet Sessions for Ethernet Control Interface Products ...................384

Protocol Support for Platinum Routers.....................................................................385

Appendix A Safety Precautions, Certifications, Compliances ...............................387Safety Terms and Symbols in this Manual ..............................................................388

Safety Terms and Symbols on the Product...............................................................388

Preventing Electrostatic Discharge ...........................................................................389

Injury Precautions ......................................................................................................390

Product Damage Precautions ....................................................................................392

EMC and Safety Standards .......................................................................................394

Additional EMC Information ..................................................................................394

Appendix B Laser Safety Guidelines ..................................................................................397General Laser Information .........................................................................................397

Lasers and Eye Damage ............................................................................................398

Classification of Lasers ...............................................................................................398

Laser Safety Precautions for Optical Fiber Communication Systems .....................398

Laser Safety ...........................................................................................................399

Precautions for Enclosed Systems ...........................................................................399

Precautions for Unenclosed Systems .......................................................................400

Labels .........................................................................................................................401

Specifications ..............................................................................................................401

Index .........................................................................................................................403


17/453

xv


About This Manual

This manual provides information on the features and applications for the Platinumwideband digital multirate routing switcher.

Audience This manual is written for engineers, technicians, and operators responsible for installation,

setup, maintenance, and/or operation of the product, and is useful to operations personnelfor purposes of daily operation and reference.

Revision HistoryTable P-1 Revision History of Manual

Edition Date Comments

A March 2006 Initial production release

B October 2006 Added PT-A2-DTB connector information Added PT-AEC-BOC connector information Added pinout diagrams for PT-ADC-IB and

PT-DAC-OB modules

C December 2006 Added 9RU support Added new crosspoint sizes Added pinout information for RS-232 and RS-422

serial ports

D October 2007 Updated PM-ADC-IB/PT-ADC-IB and PM-DAC-OB/PT-DAC-OB specifications

Added TDM support Added PT-SYNC information

E December 2007 Added PM-DACT-OB/PT-DACT-OB information Updated PT-EXPS information

Added 3 Gb/s input/output module informationF January 2008 Updated specification information for PM-HSIB+

and PT-HSIB+ modules Updated specification information for

PM-HSR-OB+ and PT-HSR-OB+ modules

G February 2008 Updated RouterMapper-configurable parameterslist

Added fiber-optical module information


18/453

About This Manualxvi


H March 2008 Updated PM-ADCT-IB and PT-ADCT-IB linearitydeviation

Updated crosspoint installation procedures

I June 2008 Added 5RU support Added DC power supply information Updated fiber optical modules information Added firmware upgrade procedures for 3 Gb

input, output, and crosspoint modules

J October 2008 Added 3 Gb fiber optical modules Added configuration of TDM audio matrices

information Updated DC power supply information

K December 2008 Added information concerning upgradingPlatinum resource module firmware

Updated information concerning fan replacement

Added information concerning Platinum powersaving modules

L February 2009 Updated information concerning the PT-SYNCmodule

Updated information concerning return loss

M August 2009 Added information concerning PT-DX-SB andPT-MX-SB modules

Added information concerning switch referencepoint configuration

N October 2009 Added information concerning PT-HSRO-OBG+modules

Updated 9RU frame output monitoring

architecture Added information concerning Navigator

O April 2010 Updated PT-DEC-IB parameter list Added information concerning PT-HSRAEC-OM

modules Removed information concerning audio delay

parameter

P August 2010 Added new parameter to PT-DACT-OB parameterlist

Updated parameters in PT-ADCT-IB parameter list

Q November 2010 Added PT-FSDMX-IBG and PT-FSDMXO-IBGmodule support

R February 2011 Added directions for connecting cables onexternal power supplies.

S July 2011 Added Platinum MADI Input and Output Modules(PT-MADI4C-IBG and PT-MADI-OBG).

Added PT-HSR8C1D-IBG and PT-HSR1D-IBG DigitalMultirate Matrix Expansion Input and ReceiverModules.

Table P-1 Revision History of Manual (Continued)



19/453


xvii


Writing ConventionsTo enhance your understanding, the authors of this manual have adhered to the followingtext conventions:

Obtaining Documents

The installation and operation manuals for most Harris BCD products are included on yourDocumentation and Product Resources DVD as individual Adobe Acrobat PDF files. Most ofthe software applications contained on the DVD include Online Help (electronic documentsintegrated into their respective software applications). While working in the application, youcan open the Online Help and print out individual topics. The most up-to-datedocumentation and software is always available on our website.

T November 2011 Added information on SFPs for PT-HSO-IB+ andPT-HSRO-OBG+ - Fiber Optical Serial VideoReceiver and Transmitter Modules (3G HD-SDI/1.5G HD-SDI/SD-SDI).

Table P-1 Revision History of Manual (Continued)


Table P-2 Writing Conventions

Term orConvention Description

Bold Indicates dialog boxes, property sheets, fields, buttons, check boxes,list boxes, combo boxes, menus, submenus, windows, lists, andselection names

Italics Indicates email addresses, the names of books or publications, andthe first instances of new terms and specialized words that needemphasis

CAPS Indicates a specific key on the keyboard, such as ENTER, TAB, CTRL,ALT, or DELETE

Code Indicates variables or command-line entries, such as a DOS entry orsomething you type into a field

> or Indicates the direction of navigation through a hierarchy of menusand windows

hyperlink Indicates a jump to another location within the electronic documentor elsewhere

Internet address Indicates a jump to a website or URL

Indicates important information that helps to avoid and troubleshootproblems

To perform aprocedure

Indicates the introduction to a procedure or series of proceduralsteps


20/453

About This Manualxviii


Applications SDTV/HDTV/AES core routing: The Platinum wideband digital multirate routing

switcher can be used as an on-air router for up to 512x512 applications; for example,core facility routing, master control distribution, transmission solutions, etc.

SD to HD migration: The Platinum wideband digital multirate routing switcher willpass and reclock both standard SD (including 143, 177, 270, 360, and 540 Mb/s) andHD (1.485 Gb/s) signals, which allows you to route both SD and HD signals in the samerouter. Consequently, it provides you with a high degree of investment protection, inthat an SD facility could easily migrate to HD without the need to replace the router.

AES/EBU digital audio, SD, and HD in the same platform : The Platinum widebanddigital multirate routing switcher can switch signals from 3 Mb/s to 1.5Gb/s, therebyproviding a truly digital signal diagnostic solution. The Platinum I/O boards will routedigital audio, SD and HD. Now you can route nearly any digital audio or video signalwithin the same router platform.

Analog audio conversion

Analog video conversion

ASI / SSI routing applications Digital signal monitoring

Distributed routing

Central casting:Link two or more Platinum routers together between facilities, andcontrol and operate as if using one large routing system from your central facility.


21/453


xix


Unpacking/Shipping Information

Unpacking a Platinum Product

All products have been carefully inspected, tested, and calibrated before shipment to ensureyears of stable and trouble-free service.

1 Check the equipment for any visible damage that may have occurred during transit.

2 Confirm that you have received all items listed on the packing list.

3 Contact your dealer if any item on the packing list is missing.

4 Contact the carrier if any item is damaged.

5 Remove all packaging material from the product and its associated components before youinstall the unit.

Returning a Platinum ProductIn the unlikely event that a product fails to operate properly, please contact our CustomerService Department to obtain a Return Authorization (RA) number, then send the unit backfor servicing.

Keep at least one set of original packaging in the event that a product needs to be returnedfor service. If the original package is not available, you can supply your own packaging aslong as it meets the following criteria:

The packaging must be able to withstand the products weight.

The product must be held rigid within the packaging.

There must be at least 2 in. (5 cm) of space between the product and the container.

The corners of the product must be protected.If the product is still within the warranty period, we will return it to you by prepaid groundshipment after servicing.


22/453

About This Manualxx


Standards There are three sets of standards used in the development of the Platinum product line:product standards, compliance standards, and safety standards.

Platinum Product StandardsThe following product standards apply to the Platinum router. Please reference the pertinentstandard for more information.

Professional Video

SMPTE 259MSMPTE Standard for Television - 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals- Serial Digital Interface

SMPTE 292MSMPTE Standard for Television - Bit-Serial Digital Interface for High Definition TelevisionSystems

SMPTE 344MSMPTE Standard for Television - 540 Mb/s Serial Digital Interface

SMPTE 424MSMPTE Standard for Television - 3 Gb/s Signal/Data Serial Interface

DVB-ASIDigital Video Broadcasting Interfaces for CATV/SMATV Headends and Similar ProfessionalEquipment

SMPTE-170M

For Analog Video Signal quality

FCC 73.699U.S. Federal guidelines for NTSC analog composite video

ITU-R.BT 470Guidelines for PAL analog composite video

ITU-R BT601-4For Serial Digital Video

Digital Audio

AES3-2003AES Recommended Practice for Digital Audio Engineering - Serial Transmission Format forTwo-Channel Linearly Represented Digital Audio Data

AES3id-2001AES Information Document for Digital Audio Engineering - Transmission of AES3 FormattedData by Unbalanced Coaxial Cable


23/453


xxi


SMPTE 276M-1995SMPTE Standard for Television - Transmission of AES-EBU Digital Audio Signals Over CoaxialCable

PT-PS Power Supply

SafetyTUV approved to latest revision of UL 60950-1 and CSA 22.2 complete with CB Report withall country deviations1

CE MarkEMC Compliance tested under EN 55103-1, 2 as a Class A Device in an E4 environment

NEBSLevel 3 Certification, Type 4 Environment, SBC Special Requirements, AT&T NEDS

EMC Compliance StandardsThe following EMC compliance standards apply:

EN 50081-1

EN 55022

EN 50082-1

IEC 1000-4-2 1995-01

IEC 801-3 1984

IEC 1000-4-4 1995-01

Part 15 of the FCC Rules

ICES-003 of the Canadian Department of Communications

Restriction on Hazardous Substances (RoHS) ComplianceDirective 2002/95/EC commonly known as the European Union (EU) Restriction onHazardous Substances (RoHS) sets limits on the use of certain substances found inelectrical and electronic equipment. The intent of this legislation is to reduce the amount ofhazardous chemicals that may leach out of landfill sites or otherwise contaminate theenvironment during end-of-life recycling. The Directive, which took effect on July 1, 2006,refers to the following hazardous substances:

Lead (Pb)

Mercury (Hg)

Cadmium (Cd) Hexavalent Chromium (Cr-V1)

Polybrominated Biphenyls (PBB)

Polybrominated Diphenyl Ethers (PBDE)

1 A total of 8 PT-PS power supplies can be used in the Platinum chassis. TUV will test for chassis leakagecurrents using all 8 power supplies operating simultaneously to determine the total chassis leakagecurrent. This total chassis leakage current value must meet EN60950 and CSA 22.2.


24/453

About This Manualxxii


In accordance with this EU Directive, all products sold in the European Union will be fullyRoHS-compliant and lead-free. Spare parts supplied for the repair and upgrade ofequipment sold before July 1, 2006 are exempt from the legislation. Equipment thatcomplies with the EU directive will be marked with a RoHS-compliant emblem, as shown inFigure P-1.

Figure P-1 RoHS Compliance Emblem

Waste from Electrical and Electronic Equipment (WEEE) ComplianceThe European Union (EU) Directive 2002/96/EC on Waste from Electrical and ElectronicEquipment (WEEE) deals with the collection, treatment, recovery, and recycling of electricaland electronic waste products. The objective of the WEEE Directive is to assign the

responsibility for the disposal of associated hazardous waste to either the producers or usersof these products. As of August 13, 2005, producers or users are required to recycleelectrical and electronic equipment at end of its useful life, and may not dispose of theequipment in landfills or by using other unapproved methods. (Some EU member statesmay have different deadlines.)

In accordance with this EU Directive, companies selling electric or electronic devices in theEU will affix labels indicating that such products must be properly recycled. Contact yourSales representative for information on returning these products for recycling. Equipmentthat complies with the EU directive will be marked with a WEEE-compliant emblem, asshown in Figure P-2.
http://-/?-http://-/?-http://-/?-http://-/?-


25/453


xxiii


Figure P-2 WEEE Compliance Emblem

Safety StandardsThe following safety standards apply (full descriptions of these standards can be found inAppendix A, Safety Precautions, Certifications, Compliances on page 387):

IEC-950

UL 60950-1

EN60950: 1992 + A1: 1993 + A2: 1993 +A3: 1995 A4: 1997 +A11: 1997 EMKO-TSE(74-SEC) 207/94

UL1419

CSA C22.2 No. 1

Safety InformationCarefully review all safety precautions to avoid injury and prevent damage to this product orany products connected to it. You will find a complete list of safety precautions inAppendix A, Safety Precautions, Certifications, Compliances on page 387. Anyuser-serviceable components (such as fuses or batteries) are only replaceable by thosecomponents listed in the manual.

IMPORTANT! Only qualified personnel should perform service procedures.


26/453

About This Manualxxiv


Safety Terms and Symbols in this Manual

T

WARNING: Statements identifying conditions or practices that may result inpersonal injury or loss of life. High voltage is present.

CAUTION: Statements identifying conditions or practices that can result in damageto the equipment or other property.


27/453

1


1 Introduction

The Platinum routing switcher system extends both the matrix size and functionality of ourrouting switcher product line. Its flexible modular architecture accommodates both standarddefinition and high definition digital video signals while keeping a versatile frame andcontrol system. This combination allows high performance, multi-format video routingwithin a single, flexible frame.

This chapter covers the following topics:

Control Features on page 17

Frame-Specific Components on page 10

Frame Specifications on page 21

Front Panel LED Indicators on page 15

Main Features on page 2

Module-Specific Components on page 11

Product Description on page 1

Product DescriptionThe Platinum routing switcher system provides matrix expandability beyond 88, to512512 in a single frame. The 88 building block provides ideal growth and flexibility formixed applications such as high definition and serial digital interface, and other integratedprocessing opportunities such as analog and/or digital conversion. With its ability to routesignals ranging from 3.0 Mb/s to 2.97 Gb/s, the Platinum router offers a clear growth pathfrom lower bit rate signals to high bandwidth, high definition format signals. This router willalso handle both AES and polarity sensitive ASI/SSI signal formats.

The Platinum router is available in these frame sizes:

The 5RU (PM-FR-5) frame supports matrices up to 7264.

The 9RU (PM-FR-9) frame supports matrices up to 128128.

The 15RU (PT-FR-15) frame supports matrices up to 256256.

The 28RU (PT-FR-28) frame supports matrices up to 512512.

All of these frames use common, front-loadable, and hot-swappable input and outputmodules. The 9RU, 15RU, and 28RU frames use common crosspoint modules. (The 5RUframe uses a different crosspoint module). Each frame has a passive module interconnect(MI) signal distribution module interconnecting the routing system.


28/453

Chapter 1Introduction

2


The frames support user-friendly, self guiding insertion and extraction: No module can beinserted into the wrong area where damage (electrical or physical) may occur. The framesare designed so that, during module insertion or extraction, damage to other modules isprevented. All modules ground before any active components are energized. This includesstandard make-before-break power connectors and grounding tabs, where necessary, onmodules.

Each frame is accessible from the front via sectioned, removable doors. Status LEDs can beviewed through these doors; these LEDs indicate power supply presence (and status),resource module usage, and link light indicators for Ethernet communications ports. Twotri-color LEDs that indicate user-defined alarm conditions are also viewable through thedoor. (See Figure 1-8 on page 16.)

The frames are designed to be compliant with NEBS certification requirements (for example,non-removable door option, locking power supplies, etc.).

Platinum frames are compatible with all of Harriss router control software products, such asCCS Navigator and RouterMapper.

A key advantage of the Platinum router is that it provides redundant crosspoint paths in the5RU, 9RU, and 15RU frames. This function, a common concern of professional broadcastcustomers, is not offered by many current competitive products. By using redundantcrosspoint modules, a fully redundant path through the system is available. While the 5RU,9RU, and 15RU Platinum frames provide complete hardware crosspoint redundancy, allframes offer redundant path operation based on advanced rule sets integrated into thecontrol system, thus providing a more robust operation than typically found in competitiveofferings.

Main Features Routing for large systems

7264 in a 5RU frame

128128 in a 9RU frame



Video routing

HD-SDI digital multirate from 3.00 Mb/s to 2.97 Gb/s

Digital video signals including SMPTE 310, SDI, ASI, HD-SDI

Analog video via conversion to/from SDI on I/O modules

Audio routing Digital audio signals including balanced and unbalanced (coaxial) AES

Analog stereo audio via conversion to/from AES on I/O modules

Module I/O in groups of 8

Route to/from digital and analog signals with no external processing

Front-loading, hot swappable modules

Redundancy (power supplies, resource modules, signal paths) throughout

Enhanced control and monitoring capabilities

Secure access rights with restrictions by level, source, and destination

CCSP, SNMP, and third-party protocol support
http://-/?-http://-/?-http://-/?-


29/453


3


Frame ArchitecturePlatinum routing switchers are available in 5RU, 9RU, 15RU, and 28RU frame sizes. Eachsize can accommodate any signal format or combination of signal formats, and hasdifferent options available for customizing. (Some aspects of frame customization andmatrix size specifics will be discussed in detail in each signal formats individual section). For

illustrations of each frame sizes physical architecture, see Figure 1-1 on page 4 throughFigure 1-4 on page 6.

Table 1-1 Platinum Series Architectural Information

Architecture 5RU(PM-FR-5)

9RU(PM-FR-9)

15RU(PT-FR-15)

28RU(PT-FR-28)

Dimensions

Width 17.5 in. (44.5 cm) 17.5 in. (44.5 cm) 17.5 in. (44.5 cm) 17.5 in. (44.5 cm)

Depth 18.4 in.(46.7 cm) 18.4 in.(46.7 cm) 18.4 in.(46.7cm) 18.4 in.(46.7cm)

Height 8.75 in. (22.2 cm) 15.75 in.(40.0

cm)

26.25 in.(66.7 cm) 49.0 in.(124.5 cm)

Weight fully loaded(approx.)

68 lb (31 kg) 125 lb (57 kg) 210 lb (95 kg) 350 lb (159 kg)

Matrix size 7264 128128 256256 512512

Matrix module capacity

Input slots 9 16 32 64

Output slots 8 16 32 64

Crosspoint slots 2 (1 redundant) 2 (1 redundant) 4 (2 redundant) 8

Resource slots 2 (1 redundant) 2 (1 redundant) 2 (1 redundant) 2 (1 redundant)

TDM slots 2 (1 redundant) 2 (1 redundant) 2 (1 redundant) 2 (1 redundant)Sync slots 2 (1 redundant) 2 (1 redundant) 2 (1 redundant) 2 (1 redundant)

PSU slots 2 4 4 8

Monitoring slots 2 4 4 4

Alarm slots 1 1 1 1

Streaming slots 1 1 1 1

Standard equipment

Power supply 1 1 2 4

Fan module 1 1 1 2

Upgrade options

Redundant power supply Yes Yes Yes Yes

Redundant resourcemodule

Yes Yes Yes Yes

Redundant sync options Yes Yes Yes Yes

Redundant crosspoint Yes Yes Yes Yes


30/453


4


Figure 1-1 7264 Physical Architecture (Front View)


MI module

Outputs 1-128

Resource (2), TDM XPT (2), Sync (2), OM (4)

Inputs 1-1282 1

Crosspoint module(128128)

Output modules

Reclocker Driver

EQ

Input modules

Power supplies


31/453


5



1

Resource (2), TDM XPT (2), Sync (2), OM (4)

2

34

Power supplies


Outputs 1-128 Inputs 1-128

Outputs 129-256

Inputs 129-256

EQ

Input modules

MI module

Output modules

Reclocker Driver


32/453


6



EQ

Input modules

MI module

12

34

56

78

Outputs 1-128Inputs 1-128

Outpu ts 129-256 Inputs 129-256



Power supplies

Power supplies


Output modules

Reclocker Driver

Resource (2), TDM XPT (2),Sync (2), OM (4)


33/453


7


The Platinum router's modular architecture consists of separate input and output modules,each of which contains eight inputs or outputs; and crosspoint matrixes (redundantcrosspoint paths can be configured for robust operation). Depending on the configuration,one or more modules may be present in the frame for various optional functions. See Table1-1 on page 3 for frame population information.

Detailed information about input modules (such as configuration, installation, blockdiagrams, and specifications) is outlined in Chapter 3.

Detailed information about output modules is outlined in Chapter 4.

Detailed information about crosspoint modules is outlined in Chapter 5.

Detai