Embed Size (px)
Citation preview
SERVICE
HAYLEY PUMPS
A FIRST CLASS SERVICE
SALES SPARES
2
Positive displacement pumps
Positive displacement pumps
This range of products are ideally suited for pumping abrasive slurries, high viscosity liquids such as liquifi ed foods and asphalt through to shear sensitive materials and include:-
Other benefi ts can include :-dry running, self priming, precise delivery of materials and fl ow control.
Gear pump
• Progressive cavity
• Diaphragm
• Peristaltic
• Rotary Lobe
• External gear
• Internal gear
• Piston
• Rotary screw
Lobe pump Peristaltic pump Air operated diaphragm pump Lobe pump
Vacuum pumps and blowers
Vacuum pumps and blowersAn increasing number of pumping and blowing applications fall within this category and include the following types :-
• Claw pumps• Liquid ring pumps• Screw and scroll• Side channel blowers• Sliding vane pumps• Rotary lobe
A wide selection of quality replacement pumps, from some of the most respected manufacturers, are now available from your local branch.
Claw pump
Side Channel pump Liquid ring pump Vane pump Vane pumps
3
Radial blower
4
Centrifugal pumps
Centrifugal pumps involve an impeller driven by an electric motor. End suction describes the entry method and entry direction of fl ow to the impeller. There are a number of other designs which will vary depending on the application and they
may involve single stage or multi stage impellors. Centrifugal pumps may be mounted either horizontally or vertically and are often used for water supply, heating, cooling washing and pressure boosting applications.
Multistage pumps
Mag Drive pump
Circulator pump
Long Coupled pump
End Suction pump
Circulator pump Hygienic pump
Electro-submersible pumpsA completely sealed motor unit where the rotor shaft is extended to attach directly to the impeller. Designed to operate in waste water, sewage, drainage, raw water extraction and mining/quarrying applications
Evaluation, reporting & repair facilities
5
Repairwork and parts supply serviceManufacturer dedicated service engineers will evaluate and complete all repair work, on or off site, as agreed by the customer. This may include genuine manufacturers parts, bearings, seals, windings, gaskets, circlips etc., plus fi nal testing, and the issue of a one year warranty. Our qualifi ed engi-neers will also provide on-site condi-tion monitoring anaysis to help prevent costly breakdowns.Our national coverage now extends to workshop facilities located at Hayley Glasgow.
Four stage evaluation and reporting documentation
STAGE 1A detailed report which includes photographic evidence of all component parts will be completed and submitted to the customer.
STAGE 2Every repair enquiry will entail a careful examination of the pump and its component parts by a skilled engineer. A document detailing this analysis together with any recommendations will be prepared and submitted to the customer.
STAGE 3A repair quotation will be created which itemises all parts to be replaced, plus labour and carriage costs involved with each repair.
STAGE 4A report showing the test results is made available to the customer.
6
Stocks & Spares
Good stocks of centrifugal and cavity pumps along with sparesSpare parts are an important part of our business and we believe in providing the most effi cient service for our customers. This means holding stock of essential spares including stators and rotors for progressive cavity pumps to mechanical seals for centrifugal pumps.
There’s also good range of submersible pumps, both single and three phase. We stock a variety of pumps exclusively for our customers in order to prevent production loss due to pump failure.
7
DOMINO PLUS
Innovative electronic panel to control and protect electric pumps
SPECIFICATION• Power 230v 1ph 50Hz or 400v 3ph 50Hz• Low voltage control circuit• Auto-Off-Manual Control• LCD Display• Dry Run Alarm, Trip & Indication (Adjustable Setting)• Motor Overload Trip & Indication (Adjustable Setting)• Adjustable Cut-In Time Delay• Over/Under Voltage Protection• Automatic Re-Start x 4 Attempts• Auxiliary Circuit Protection Fuse• Motor Protection Fuse• Motor Run Capacitor (if required)• IP55 Case• Temperature Limit -5°C to +40°C• Humidity Limit 50% @ 40°C
DRY RUN PROTECTIONDomino Plus safeguards the pump against dry running by
sensing a change in motor power factor.
OVERLOAD PROTECTIONDomino Plus protects the pump from current overload.
AUTOMATIC SET-UPDomino Plus has automatic set-up which enables a wide range
of pumps to be protected.
EASY INSTALLATIONDomino Plus is quick and easy to install, with no specialist
knowledge.
PUMP CONTROLDomino Plus has the facility to control the pump manually or
automatically via fl oat or pressure switch.
INDICATIONPower On, Pump Running, Overload,Water Level Alarm,
Dry-Running Alarm.
SAFETYDomino Plus has a lockable safety mains power switch.
MOTOR RATINGS1ph 0.37 – 2.2kW 2 - 16A
3ph 0.55 – 7.5kW 2 - 15A
3ph 7.5 – 11.0kW 16 - 24A
www.hayley-group.co.uk
ABERYSTWYTHTel: 01970 626 227Email: [email protected]
ALFRETONTel: 01773 546 700Email: [email protected]
ANDOVERTel: 01264 353 111Email: [email protected]
BALLYMENATel: (028) 256 47112Email: [email protected]
BELFASTTel: (028) 903 71130Email: [email protected]
BIRMINGHAMTel: 0121 782 8877Email: [email protected]
CUMBRIATel: 01228 635 780Email: [email protected]
CZECH REPUBLICTel: +42 0545 217 807Email: [email protected]
DERBYTel: 01332 680 011Email: [email protected]
BURTON-ON-TRENTTel: 01283 510 674Email: [email protected]
BURY ST. EDMUNDSTel: 01284 750 550Email: [email protected]
BRISTOLTel: 01275 844 440Email: [email protected]
ABERDEENTel: 01224 898 870Email: [email protected]
SEAHAMTel: 0191 523 8800Email: [email protected]
SHREWSBURYTel: 01743 452 000Email: [email protected]
NORWICHTel: 01603 482 848Email: [email protected]
OSWESTRYTel: 01691 670 880Email: [email protected]
SOUTH KIRKBYTel: 01977 647 455Email: [email protected]
WEST THURROCKTel: 01708 860 560Email: [email protected]
STOKE-ON-TRENTTel: 01782 214 822Email: [email protected]
TELFORDTel: 01952 680 366Email: [email protected]
WOLVERHAMPTONTel: 01902 454 151Email: [email protected]
WORCESTERTel: 01905 756 200Email: [email protected]
SHEFFIELDTel: 0114 275 1711Email: [email protected]
DUDLEY (HAYLEY 247)Tel: 0845 30 40 247Email: [email protected]
EXETERTel: 01392 823 180Email: [email protected]
GLASGOWTel: 0141 810 1066Email: [email protected]
HALESOWEN (HQ)Tel: 0121 550 4242Email: [email protected]
GLOUCESTERTel: 01452 855 200Email: [email protected]
KING’S LYNNTel: 01553 770 660Email: [email protected]
HALESOWEN (RAIL)Tel: 0121 585 5841Email: [email protected]
INVERNESSTel: 01463 250 831Email: [email protected]
MILTON KEYNESTel: 01908 282150Email: [email protected]
LLANDUDNOTel: 01492 593 838Email: [email protected]
MANCHESTERTel: 0161 848 0130Email: [email protected]
MANCHESTER (RAIL)Tel: 0161 872 7466Email: [email protected]
Hayley Group Plc, Shelah Road, Halesowen B63 3XL is ISO 9001, ISO 14001 & OHSAS 18001 certified
NEWTOWNTel: 01686 622 522Email: [email protected]
NEWPORTTel: 01633 280 088Email: [email protected]
HEREFORDTel: 01432 350002Email: [email protected]
FALKIRKTel: 01324 632380Email: [email protected]
POOLETel: 01202 666 611Email: [email protected]
