Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
Handout 1
Answers for industry.Unrestricted © Siemens AG 2014. All rights reserved.
Retrofit standard solutionSIMOREG to SINAMICS
HCM, 28th Mar 2019
Page 2 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Dates:2013 -> Start phase-out2014 -> Start spare parts phase2020 -> Production is discontinued2022 -> End of warranty
SIMOREG DC-MASTER – Product phase out
The devices of the DC MASTER 6RA70 series were discontinued on February 2014, the spare parts stocking will continue until October 2020.
SIMOREG 6RA22
SIMOREG DC MASTER 6RA70
Handout 2
Page 3 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Complete retrofit to SINAMICS DCM
SIMOREG 6RA2x and 6RA70 can be replaced easily with their successor SINAMICS DCM 6RA80
where downwards compatibility is ensured for both the function scope and the power range of the SIMOREG.
The existing DC motors can continue to be operated without modification.
The migration to the SINAMICS platform also provides enormous benefits in the spare parts stocking because the components originate from the SINAMICS modular system.
Page 4 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Various solutions
The following possibilities can be chosen for the retrofit of SIMOREG converters:
Replacement of SIMOREG with SINAMICS DC Master The existing wiring is retained and the motor (possibly overhauled) remains in
operation.
Replacement of the closed-loop controlOperation of the existing power section (6RA70) and motor is continued
Replacement of the rectifiers and the motor (DC->DC)The rectifiers and the motor are replaced with new devices from the SINAMICS
DCM or SIMOTICS DC product range.
Migration to AC technology (DC->AC)The converters and motors can be upgraded to the state-of-the-art AC technology
(e.g. SINAMICS G150).
Handout 3
Page 5 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Advantages of the DC retrofit solution
Some tangible advantages favor the retention of the presumed traditional DC technology:
Lower costs (in particular when parts of the drive train are retained)
Reduced space requirement (motors and converters)
High overload capability
High starting torque
Very good control response, comparable with AC technology
Low torque ripple, in particular at low speeds
Continuous operation at low speeds possible
Additional advantage: The power cables do not need to be relaid!
Page 6 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Interchangeability
Mechanical:SINAMICS DCM has been developed as successor product of the SIMOREG DC Master. Consequently, devices of the same power can be replaced mechanically (same space requirement).
The "Top power connections" option, however, is no longer available.
Handout 4
Page 7 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
6RA70 software compatibility
Functional:With few exceptions, all functions and options of the predecessor devices are also available for SINAMICS DCM.
The parameterization can be converted manually to the new parameter.
The following exceptions exist:• SIMOLINK no longer available (alternative: SINAMICS Link / OA-Link)• No CAN bus available (connection possibly via an external gateway)• Option S00 Free blocks and logic functions can be configured with DCC• No T400 technology module available possibly replaced by replacement
configuring with DCC (with Advanced CUD or external CU320-2)
Page 8 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
SINAMICS DCM product variants
SINAMICS DC MASTER
DCM DC ConverterBuilt-in devices
DCM Control Module6RA70 successorControl Module
DCM CabinetsReady-to-use converter
cabinets,
Current range 15 - 3000A / Output range 6 kW to 30 MW
Handout 5
Page 9 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Rating plate data part 1
Serial number
Order number /MLFB, 6RA
Input rated data,(armature circuit)
Output rated data,armature circuit
Page 10 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Rating plate data part 2
DIN designation
D: 3-phase connection
I: Single-phase connection
Armature:
Maximum 420 V output voltage (for 380/400 V supply system connection)
200 A rated output current
Handout 6
Page 11 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
SINAMICS DCM technical information• Interfaces to the automation
• PROFIBUS DP, USS• Optional PROFINET, analog/digital inputs
• DimensionsBuilt-in devices: B: 256 - 453 mm, D: 220 - 500 mm, H: 385 - 883 mm, Wt: 10-185 kg
• Climatic ambient conditions• Ambient temperature: 0°C – 40/45°C (up to 50° C with derating)• Relative humidity: 95% (no condensation)• Installation altitude: < 1000 m NN (up to 5000 m with derating)• MTBF: > 170,000 hours
www.siemens.com/sinamics-dcm
Our retrofit specialists can also support you with special solutions if the conditions listed above cannot be complied with on the system.
Additional information on SINAMICS DCM
Page 12 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Downtime
Delivery timeApprox. 2-10 weeks *)
AssemblyApprox. 8-24 hours*)
CommissioningApprox. 16 hours
Retrofit project planning
*) Depending on the size/power
Handout 7
Page 13 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Secured plant availability
Upgrading to the latest technical state of the SINAMICS platform ensures spare parts availability again for many years of operation.
The benefits
• Downwards compatibilitySINAMICS DCM was developed from the beginning to be downwards compatible to SIMOREG. This makes the retrofit easy to perform.
• Easy to maintainThe modular design allows single modules and power components to be replaced easily and quickly in the cabinet unit (DCM Cabinet).
• New networking optionsThe traditional analog/digital interface is supplemented with PROFINET(incl. remote monitoring options), as well as the standard PROFIBUS and CAN connection options.
• Modern diagnostics toolsA convenient commissioning and diagnostics option is available with the STARTER commissioning tool.
• User-friendliness is increasedThe operator panel (AOP30) simplifies monitoring in operation; this employs internal trace functions as well asautomatic recording of fault cases that can be read out in operation, which significantly expands the diagnostic options.
Page 14 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Conversion table
A conversion table and a presentation are available for the standardized exchange.
Handout 8
Page 15 Customer Services Large Drives
Unrestricted © Siemens AG 2014. All rights reserved.
Contact
Information http://www.siemens.com/sinamics-dcm
Tran Vu [email protected](+84) 914.295.764